freebsd-skq/sys/net80211/ieee80211_var.h

408 lines
17 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2001 Atsushi Onoe
2004-12-31 22:42:38 +00:00
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_VAR_H_
#define _NET80211_IEEE80211_VAR_H_
/*
* Definitions for IEEE 802.11 drivers.
*/
#define IEEE80211_DEBUG
#undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */
/* NB: portability glue must go first */
#ifdef __NetBSD__
#include <net80211/ieee80211_netbsd.h>
#elif __FreeBSD__
#include <net80211/ieee80211_freebsd.h>
#elif __linux__
#include <net80211/ieee80211_linux.h>
#else
#error "No support for your operating system!"
#endif
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
#include <net80211/ieee80211_node.h>
#include <net80211/ieee80211_proto.h>
#define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */
#define IEEE80211_TXPOWER_MIN 0 /* kill radio */
#define IEEE80211_DTIM_MAX 15 /* max DTIM period */
#define IEEE80211_DTIM_MIN 1 /* min DTIM period */
#define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
#define IEEE80211_BINTVAL_MAX 500 /* max beacon interval (TU's) */
#define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */
#define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */
#define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
#define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
#define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
struct ieee80211_aclator;
struct sysctl_ctx_list;
struct ieee80211com {
SLIST_ENTRY(ieee80211com) ic_next;
struct ifnet *ic_ifp; /* associated device */
struct ieee80211_stats ic_stats; /* statistics */
struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */
u_int32_t ic_debug; /* debug msg flags */
int ic_vap; /* virtual AP index */
ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */
int (*ic_reset)(struct ifnet *);
void (*ic_recv_mgmt)(struct ieee80211com *,
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
struct mbuf *, struct ieee80211_node *,
int, int, u_int32_t);
int (*ic_send_mgmt)(struct ieee80211com *,
struct ieee80211_node *, int, int);
int (*ic_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
void (*ic_newassoc)(struct ieee80211com *,
struct ieee80211_node *, int);
void (*ic_updateslot)(struct ifnet *);
void (*ic_set_tim)(struct ieee80211com *,
struct ieee80211_node *, int);
u_int8_t ic_myaddr[IEEE80211_ADDR_LEN];
struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
u_int8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
u_int8_t ic_chan_active[IEEE80211_CHAN_BYTES];
u_int8_t ic_chan_scan[IEEE80211_CHAN_BYTES];
struct ieee80211_node_table ic_scan; /* scan candidates */
struct ifqueue ic_mgtq;
u_int32_t ic_flags; /* state flags */
u_int32_t ic_flags_ext; /* extended state flags */
u_int32_t ic_caps; /* capabilities */
u_int16_t ic_modecaps; /* set of mode capabilities */
u_int16_t ic_curmode; /* current mode */
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
enum ieee80211_opmode ic_opmode; /* operation mode */
enum ieee80211_state ic_state; /* 802.11 state */
enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
enum ieee80211_roamingmode ic_roaming; /* roaming mode */
struct ieee80211_node_table ic_sta; /* stations/neighbors */
u_int32_t *ic_aid_bitmap; /* association id map */
u_int16_t ic_max_aid;
u_int16_t ic_sta_assoc; /* stations associated */
u_int16_t ic_ps_sta; /* stations in power save */
u_int16_t ic_ps_pending; /* ps sta's w/ pending frames */
u_int8_t *ic_tim_bitmap; /* power-save stations w/ data*/
u_int16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */
u_int8_t ic_dtim_period; /* DTIM period */
u_int8_t ic_dtim_count; /* DTIM count for last bcn */
struct ifmedia ic_media; /* interface media config */
struct bpf_if *ic_rawbpf; /* packet filter structure */
struct ieee80211_node *ic_bss; /* information for this node */
struct ieee80211_channel *ic_ibss_chan;
int ic_fixed_rate; /* index to ic_sup_rates[] */
u_int16_t ic_rtsthreshold;
u_int16_t ic_fragthreshold;
struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*);
void (*ic_node_free)(struct ieee80211_node *);
void (*ic_node_cleanup)(struct ieee80211_node *);
u_int8_t (*ic_node_getrssi)(const struct ieee80211_node*);
u_int16_t ic_lintval; /* listen interval */
u_int16_t ic_holdover; /* PM hold over duration */
u_int16_t ic_txmin; /* min tx retry count */
u_int16_t ic_txmax; /* max tx retry count */
u_int16_t ic_txlifetime; /* tx lifetime */
u_int16_t ic_txpowlimit; /* global tx power limit */
u_int16_t ic_bmisstimeout;/* beacon miss threshold (ms) */
u_int16_t ic_nonerpsta; /* # non-ERP stations */
u_int16_t ic_longslotsta; /* # long slot time stations */
int ic_mgt_timer; /* mgmt timeout */
int ic_inact_timer; /* inactivity timer wait */
int ic_des_esslen;
u_int8_t ic_des_essid[IEEE80211_NWID_LEN];
struct ieee80211_channel *ic_des_chan; /* desired channel */
u_int8_t ic_des_bssid[IEEE80211_ADDR_LEN];
void *ic_opt_ie; /* user-specified IE's */
u_int16_t ic_opt_ie_len; /* length of ni_opt_ie */
/*
* Inactivity timer settings for nodes.
*/
int ic_inact_init; /* initial setting */
int ic_inact_auth; /* auth but not assoc setting */
int ic_inact_run; /* authorized setting */
int ic_inact_probe; /* inactive probe time */
/*
* WME/WMM state.
*/
struct ieee80211_wme_state ic_wme;
/*
* Cipher state/configuration.
*/
struct ieee80211_crypto_state ic_crypto;
#define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */
#define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */
/*
* 802.1x glue. When an authenticator attaches it
* fills in this section. We assume that when ic_ec
* is setup that the methods are safe to call.
*/
const struct ieee80211_authenticator *ic_auth;
struct eapolcom *ic_ec;
/*
* Access control glue. When a control agent attaches
* it fills in this section. We assume that when ic_ac
* is setup that the methods are safe to call.
*/
const struct ieee80211_aclator *ic_acl;
void *ic_as;
};
#define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN)
/* ic_flags */
/* NB: bits 0x4c available */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
#define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
#define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */
#define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
#define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */
#define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
#define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
#define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
#define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
#define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
#define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/
#define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
#define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
#define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
#define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
#define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
#define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
#define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
#define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */
#define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
#define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
#define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
#define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
#define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
#define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
#define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */
#define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */
/* ic_flags_ext */
#define IEEE80211_FEXT_WDS 0x00000001 /* CONF: 4 addr allowed */
/* 0x00000006 reserved */
#define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: enable full bgscan completion */
2003-10-17 21:56:42 +00:00
/* ic_caps */
#define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */
#define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */
#define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */
#define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */
#define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
#define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
/* 0x10000000 reserved */
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
#define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */
/* XXX protection/barker? */
#define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */
void ieee80211_ifattach(struct ieee80211com *);
void ieee80211_ifdetach(struct ieee80211com *);
void ieee80211_announce(struct ieee80211com *);
void ieee80211_media_init(struct ieee80211com *,
ifm_change_cb_t, ifm_stat_cb_t);
struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]);
int ieee80211_media_change(struct ifnet *);
void ieee80211_media_status(struct ifnet *, struct ifmediareq *);
int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t);
void ieee80211_watchdog(struct ieee80211com *);
int ieee80211_rate2media(struct ieee80211com *, int,
enum ieee80211_phymode);
int ieee80211_media2rate(int);
u_int ieee80211_mhz2ieee(u_int, u_int);
u_int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *);
u_int ieee80211_ieee2mhz(u_int, u_int);
int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *,
struct ieee80211_channel *);
/*
* Key update synchronization methods. XXX should not be visible.
*/
static __inline void
ieee80211_key_update_begin(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_begin(ic);
}
static __inline void
ieee80211_key_update_end(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_end(ic);
}
/*
* XXX these need to be here for IEEE80211_F_DATAPAD
*/
/*
* Return the space occupied by the 802.11 header and any
* padding required by the driver. This works for a
* management or data frame.
*/
static __inline int
ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_hdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(u_int32_t));
return size;
}
/*
* Like ieee80211_hdrspace, but handles any type of frame.
*/
static __inline int
ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_anyhdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(u_int32_t));
return size;
}
#define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */
#define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */
#define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */
#define IEEE80211_MSG_INPUT 0x08000000 /* input handling */
#define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */
#define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */
#define IEEE80211_MSG_NODE 0x01000000 /* node handling */
#define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */
#define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */
#define IEEE80211_MSG_SCAN 0x00200000 /* scanning */
#define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */
#define IEEE80211_MSG_STATE 0x00080000 /* state machine */
#define IEEE80211_MSG_POWER 0x00040000 /* power save handling */
#define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */
#define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */
#define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */
#define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */
#define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */
#define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */
#define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */
#define IEEE80211_MSG_WME 0x00000400 /* WME protocol */
#define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */
#define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */
#define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */
#define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */
#define IEEE80211_MSG_ANY 0xffffffff /* anything */
#ifdef IEEE80211_DEBUG
#define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m))
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note(_ic, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \
} while (0)
void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...);
void ieee80211_note_mac(struct ieee80211com *ic,
const u_int8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...);
void ieee80211_note_frame(struct ieee80211com *ic,
const struct ieee80211_frame *wh, const char *fmt, ...);
#define ieee80211_msg_debug(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
#define ieee80211_msg_dumppkts(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
#define ieee80211_msg_input(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_INPUT)
#define ieee80211_msg_radius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
#define ieee80211_msg_dumpradius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
#define ieee80211_msg_dumpradkeys(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
#define ieee80211_msg_scan(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_SCAN)
#define ieee80211_msg_assoc(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_ASSOC)
#else
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...)
#define ieee80211_msg_dumppkts(_ic) 0
#define ieee80211_msg(_ic, _m) 0
#endif
#endif /* _NET80211_IEEE80211_VAR_H_ */