Added the psm driver from 1.1.5.

Submitted by:	dfr
This commit is contained in:
Doug Rabson 1994-09-09 11:27:50 +00:00
parent 304b4edbac
commit 010a751e0a
4 changed files with 594 additions and 0 deletions

44
sys/alpha/include/mouse.h Normal file
View File

@ -0,0 +1,44 @@
/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: mouse.h,v 1.1 1994/05/17 14:05:31 jkh Exp $
*/
struct mouseinfo {
unsigned char status;
char xmotion, ymotion;
};
#define BUTSTATMASK 0x07 /* Any mouse button down if any bit set */
#define BUTCHNGMASK 0x38 /* Any mouse button changed if any bit set */
#define BUT3STAT 0x01 /* Button 3 down if set */
#define BUT2STAT 0x02 /* Button 2 down if set */
#define BUT1STAT 0x04 /* Button 1 down if set */
#define BUT3CHNG 0x08 /* Button 3 changed if set */
#define BUT2CHNG 0x10 /* Button 2 changed if set */
#define BUT1CHNG 0x20 /* Button 1 changed if set */
#define MOVEMENT 0x40 /* Mouse movement detected */
/* Ioctl definitions */
#define MOUSEIOC ('M'<<8)
#define MOUSEIOCREAD (MOUSEIOC|60)

44
sys/i386/include/mouse.h Normal file
View File

@ -0,0 +1,44 @@
/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: mouse.h,v 1.1 1994/05/17 14:05:31 jkh Exp $
*/
struct mouseinfo {
unsigned char status;
char xmotion, ymotion;
};
#define BUTSTATMASK 0x07 /* Any mouse button down if any bit set */
#define BUTCHNGMASK 0x38 /* Any mouse button changed if any bit set */
#define BUT3STAT 0x01 /* Button 3 down if set */
#define BUT2STAT 0x02 /* Button 2 down if set */
#define BUT1STAT 0x04 /* Button 1 down if set */
#define BUT3CHNG 0x08 /* Button 3 changed if set */
#define BUT2CHNG 0x10 /* Button 2 changed if set */
#define BUT1CHNG 0x20 /* Button 1 changed if set */
#define MOVEMENT 0x40 /* Mouse movement detected */
/* Ioctl definitions */
#define MOUSEIOC ('M'<<8)
#define MOUSEIOCREAD (MOUSEIOC|60)

462
sys/i386/isa/psm.c Normal file
View File

@ -0,0 +1,462 @@
/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported to 386bsd Oct 17, 1992
* Sandi Donno, Computer Science, University of Cape Town, South Africa
* Please send bug reports to sandi@cs.uct.ac.za
*
* Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
* although I was only partially successful in getting the alpha release
* of his "driver for the Logitech and ATI Inport Bus mice for use with
* 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
* found his code to be an invaluable reference when porting this driver
* to 386bsd.
*
* Further modifications for latest 386BSD+patchkit and port to NetBSD,
* Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
*
* Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
* Andrew Herbert - 12 June 1993
*
* Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
* - 13 June 1993
*
* Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
* - 24 October 1993
*/
#include "psm.h"
#if NPSM > 0
#include <param.h>
#include <kernel.h>
#include <systm.h>
#include <buf.h>
#include <malloc.h>
#include <ioctl.h>
#include <tty.h>
#include <file.h>
#include <proc.h>
#include <vnode.h>
#include <i386/include/mouse.h>
#include <i386/include/pio.h> /* Julian's fast IO macros */
#include <i386/isa/isa_device.h>
#ifdef 0
#include "syslog.h" /* For debugging */
#endif
#define DATA 0 /* Offset for data port, read-write */
#define CNTRL 4 /* Offset for control port, write-only */
#define STATUS 4 /* Offset for status port, read-only */
/* status bits */
#define PSM_OUTPUT_ACK 0x02 /* output acknowledge */
/* controller commands */
#define PSM_ENABLE 0xa8 /* enable auxiliary port */
#define PSM_DISABLE 0xa7 /* disable auxiliary port */
#define PSM_INT_ENABLE 0x47 /* enable controller interrupts */
#define PSM_INT_DISABLE 0x65 /* disable controller interrupts */
/* m+use commands */
#define PSM_SET_SCALE11 0xe6 /* set 1:1 scaling */
#define PSM_SET_SCALE21 0xe7 /* set 2:1 scaling */
#define PSM_SET_RES 0xe8 /* set resolution */
#define PSM_GET_SCALE 0xe9 /* set scaling factor */
#define PSM_SET_STREAM 0xea /* set streaming mode */
#define PSM_SET_SAMPLE 0xf3 /* set sampling rate */
#define PSM_DEV_ENABLE 0xf4 /* mouse on */
#define PSM_DEV_DISABLE 0xf5 /* mouse off */
#define PSM_RESET 0xff /* reset */
#define PSMUNIT(dev) (minor(dev) >> 1)
#ifndef min
#define min(x,y) (x < y ? x : y)
#endif min
int psmprobe (struct isa_device *);
int psmattach (struct isa_device *);
void psm_poll_status(void);
static int psmaddr[NPSM]; /* Base I/O port addresses per unit */
#define MSBSZ 1024 /* Output queue size (pwr of 2 is best) */
struct ringbuf {
int count, first, last;
char queue[MSBSZ];
};
static struct psm_softc { /* Driver status information */
struct ringbuf inq; /* Input queue */
struct selinfo rsel; /* Process selecting for Input */
unsigned char state; /* Mouse driver state */
unsigned char status; /* Mouse button status */
unsigned char button; /* Previous mouse button status bits */
int x, y; /* accumulated motion in the X,Y axis */
} psm_softc[NPSM];
#define OPEN 1 /* Device is open */
#define ASLP 2 /* Waiting for mouse data */
struct isa_driver psmdriver = { psmprobe, psmattach, "psm" };
#define AUX_PORT 0x60 /* AUX_PORT base (S.Yuen) */
static void psm_write_dev(int inport, u_char value)
{
psm_poll_status();
outb(inport+CNTRL, 0xd4);
psm_poll_status();
outb(inport+DATA,value);
}
static inline void psm_command(int ioport, u_char value)
{
psm_poll_status();
outb(ioport+CNTRL, 0x60);
psm_poll_status();
outb(ioport+DATA, value);
}
int psmprobe(struct isa_device *dvp)
{
/* XXX: Needs a real probe routine. */
int ioport,c,unit;
ioport=dvp->id_iobase;
unit=dvp->id_unit;
psm_write_dev(ioport,0xff); /* Reset aux device */
psm_poll_status();
outb(ioport+CNTRL,0xa9);
psm_poll_status();
outb(ioport+CNTRL,0xaa);
c = inb(ioport+DATA);
if(c&0x04) {
/* printf("PS/2 AUX mouse is not found\n");*/
psm_command(ioport,0x65);
psmaddr[unit] = 0; /* Device not found */
return(0);}
/* printf("PS/2 AUX mouse found. Installing driver\n");*/
return (4);
}
int psmattach(struct isa_device *dvp)
{
int unit = dvp->id_unit;
int ioport = dvp->id_iobase;
struct psm_softc *sc = &psm_softc[unit];
/* Save I/O base address */
psmaddr[unit] = ioport;
/* Disable mouse interrupts */
psm_poll_status();
outb(ioport+CNTRL, PSM_ENABLE);
#ifdef 0
psm_write(ioport, PSM_SET_RES);
psm_write(ioport, 0x03); /* 8 counts/mm */
psm_write(ioport, PSM_SET_SCALE);
psm_write(ioport, 0x02); /* 2:1 */
psm_write(ioport, PSM_SET_SCALE21);
psm_write(ioport, PSM_SET_SAMPLE);
psm_write(ioport, 0x64); /* 100 samples/sec */
psm_write(ioport, PSM_SET_STREAM);
#endif
psm_poll_status();
outb(ioport+CNTRL, PSM_DISABLE);
psm_command(ioport, PSM_INT_DISABLE);
/* Setup initial state */
sc->state = 0;
/* Done */
return(0);
}
int psmopen(dev_t dev, int flag, int fmt, struct proc *p)
{
int unit = PSMUNIT(dev);
struct psm_softc *sc;
int ioport;
/* Validate unit number */
if (unit >= NPSM)
return(ENXIO);
/* Get device data */
sc = &psm_softc[unit];
ioport = psmaddr[unit];
/* If device does not exist */
if (ioport == 0)
return(ENXIO);
/* Disallow multiple opens */
if (sc->state & OPEN)
return(EBUSY);
/* Initialize state */
sc->state |= OPEN;
sc->rsel.si_flags = 0;
sc->rsel.si_pid = 0;
sc->status = 0;
sc->button = 0;
sc->x = 0;
sc->y = 0;
/* Allocate and initialize a ring buffer */
sc->inq.count = sc->inq.first = sc->inq.last = 0;
/* Enable Bus Mouse interrupts */
psm_write_dev(ioport, PSM_DEV_ENABLE);
psm_poll_status();
outb(ioport+CNTRL, PSM_ENABLE);
psm_command(ioport, PSM_INT_ENABLE);
/* Successful open */
return(0);
}
void psm_poll_status(void)
{
while(inb(AUX_PORT+STATUS)&0x03) {
if(inb(AUX_PORT+STATUS) & 0x2 == 0x2)
inb(AUX_PORT+DATA);}
return;
}
int psmclose(dev_t dev, int flag, int fmt, struct proc *p)
{
int unit, ioport;
struct psm_softc *sc;
/* Get unit and associated info */
unit = PSMUNIT(dev);
sc = &psm_softc[unit];
ioport = psmaddr[unit];
/* Disable further mouse interrupts */
psm_command(ioport,PSM_INT_DISABLE);
psm_poll_status();
outb(ioport+CNTRL,PSM_DISABLE );
/* Complete the close */
sc->state &= ~OPEN;
/* close is almost always successful */
return(0);
}
int psmread(dev_t dev, struct uio *uio, int flag)
{
int s;
int error = 0; /* keep compiler quiet, even though initialisation
is unnecessary */
unsigned length;
struct psm_softc *sc;
unsigned char buffer[100];
/* Get device information */
sc = &psm_softc[PSMUNIT(dev)];
/* Block until mouse activity occured */
s = spltty();
while (sc->inq.count == 0) {
if (minor(dev) & 0x1) {
splx(s);
return(EWOULDBLOCK);
}
sc->state |= ASLP;
error = tsleep((caddr_t)sc, PZERO | PCATCH, "psmrea", 0);
if (error != 0) {
splx(s);
return(error);
}
}
/* Transfer as many chunks as possible */
while (sc->inq.count > 0 && uio->uio_resid > 0) {
length = min(sc->inq.count, uio->uio_resid);
if (length > sizeof(buffer))
length = sizeof(buffer);
/* Remove a small chunk from input queue */
if (sc->inq.first + length >= MSBSZ) {
bcopy(&sc->inq.queue[sc->inq.first],
buffer, MSBSZ - sc->inq.first);
bcopy(sc->inq.queue, &buffer[MSBSZ-sc->inq.first],
length - (MSBSZ - sc->inq.first));
}
else
bcopy(&sc->inq.queue[sc->inq.first], buffer, length);
sc->inq.first = (sc->inq.first + length) % MSBSZ;
sc->inq.count -= length;
/* Copy data to user process */
error = uiomove(buffer, length, uio);
if (error)
break;
}
sc->x = sc->y = 0;
/* Allow interrupts again */
splx(s);
return(error);
}
int psmioctl(dev_t dev, caddr_t addr, int cmd, int flag, struct proc *p)
{
struct psm_softc *sc;
struct mouseinfo info;
int s, error;
/* Get device information */
sc = &psm_softc[PSMUNIT(dev)];
/* Perform IOCTL command */
switch (cmd) {
case MOUSEIOCREAD:
/* Don't modify info while calculating */
s = spltty();
/* Build mouse status octet */
info.status = sc->status;
if (sc->x || sc->y)
info.status |= MOVEMENT;
/* Encode X and Y motion as good as we can */
if (sc->x > 127)
info.xmotion = 127;
else if (sc->x < -128)
info.xmotion = -128;
else
info.xmotion = sc->x;
if (sc->y > 127)
info.ymotion = 127;
else if (sc->y < -128)
info.ymotion = -128;
else
info.ymotion = sc->y;
/* Reset historical information */
sc->x = 0;
sc->y = 0;
sc->status &= ~BUTCHNGMASK;
/* Allow interrupts and copy result buffer */
splx(s);
error = copyout(&info, addr, sizeof(struct mouseinfo));
break;
default:
error = EINVAL;
break;
}
/* Return error code */
return(error);
}
void psmintr(unit)
int unit;
{
struct psm_softc *sc = &psm_softc[unit];
int ioport = psmaddr[unit];
sc->inq.queue[sc->inq.last++ % MSBSZ] = inb(ioport+DATA);
sc->inq.count++;
if (sc -> state & ASLP) {
sc->state &= ~ASLP;
wakeup((caddr_t)sc);
}
selwakeup(&sc->rsel);
}
int psmselect(dev_t dev, int rw, struct proc *p)
{
int s, ret;
struct psm_softc *sc = &psm_softc[PSMUNIT(dev)];
/* Silly to select for output */
if (rw == FWRITE)
return(0);
/* Return true if a mouse event available */
s = spltty();
if (sc->inq.count)
ret = 1;
else {
selrecord(p, &sc->rsel);
ret = 0;
}
splx(s);
return(ret);
}
#endif

44
sys/sys/mouse.h Normal file
View File

@ -0,0 +1,44 @@
/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: mouse.h,v 1.1 1994/05/17 14:05:31 jkh Exp $
*/
struct mouseinfo {
unsigned char status;
char xmotion, ymotion;
};
#define BUTSTATMASK 0x07 /* Any mouse button down if any bit set */
#define BUTCHNGMASK 0x38 /* Any mouse button changed if any bit set */
#define BUT3STAT 0x01 /* Button 3 down if set */
#define BUT2STAT 0x02 /* Button 2 down if set */
#define BUT1STAT 0x04 /* Button 1 down if set */
#define BUT3CHNG 0x08 /* Button 3 changed if set */
#define BUT2CHNG 0x10 /* Button 2 changed if set */
#define BUT1CHNG 0x20 /* Button 1 changed if set */
#define MOVEMENT 0x40 /* Mouse movement detected */
/* Ioctl definitions */
#define MOUSEIOC ('M'<<8)
#define MOUSEIOCREAD (MOUSEIOC|60)