- Newbus'ify and bus_space'ify.
- Separate bus dependent part and independent part. - Moved source files to sys/dev/fe (repo copied). - Fixed some comments by chi@bd.mbn.or.jp (Chiharu Shibata) Tested by: bsd-nomads@clave.gr.jp and FreeBSD98-testers@jp.freebsd.org
This commit is contained in:
nyan
parent
b4f34dbe5f
commit
06ebe902ea
@ -148,6 +148,8 @@ dev/ep/if_ep_mca.c optional ep mca
|
||||
dev/ep/if_ep_pccard.c optional ep card
|
||||
dev/ex/if_ex.c optional ex
|
||||
dev/ex/if_ex_isa.c optional ex isa
|
||||
dev/fe/if_fe.c optional fe
|
||||
dev/fe/if_fe_pccard.c optional fe card
|
||||
dev/hea/eni.c optional hea
|
||||
dev/hea/eni_buffer.c optional hea
|
||||
dev/hea/eni_globals.c optional hea
|
||||
|
||||
@ -106,6 +106,7 @@ dev/fb/fb.c optional fb
|
||||
dev/fb/fb.c optional vga
|
||||
dev/fb/splash.c count splash
|
||||
dev/fb/vga.c optional vga
|
||||
dev/fe/if_fe_isa.c optional fe isa
|
||||
dev/kbd/atkbd.c optional atkbd
|
||||
dev/kbd/atkbdc.c count atkbdc
|
||||
dev/kbd/kbd.c optional atkbd
|
||||
@ -234,7 +235,6 @@ i386/isa/gsc.c count gsc
|
||||
i386/isa/if_ar.c optional ar
|
||||
i386/isa/if_cx.c optional cx
|
||||
i386/isa/if_el.c count el
|
||||
i386/isa/if_fe.c count fe
|
||||
i386/isa/if_le.c count le
|
||||
i386/isa/if_rdp.c count rdp
|
||||
i386/isa/if_sr.c count sr
|
||||
|
||||
@ -102,6 +102,7 @@ dev/eisa/eisaconf.c count eisa
|
||||
dev/fb/fb.c optional fb
|
||||
dev/fb/fb.c optional gdc
|
||||
dev/fb/splash.c count splash
|
||||
dev/fe/if_fe_cbus.c optional fe isa
|
||||
dev/kbd/kbd.c optional kbd
|
||||
dev/kbd/kbd.c optional sc
|
||||
dev/kbd/kbd.c optional ukbd
|
||||
@ -223,7 +224,6 @@ i386/isa/gsc.c count gsc
|
||||
i386/isa/if_ar.c optional ar
|
||||
i386/isa/if_cx.c optional cx
|
||||
i386/isa/if_el.c count el
|
||||
i386/isa/if_fe.c count fe
|
||||
i386/isa/if_le.c count le
|
||||
i386/isa/if_rdp.c count rdp
|
||||
i386/isa/if_sr.c count sr
|
||||
|
||||
2890
sys/dev/fe/if_fe.c
2890
sys/dev/fe/if_fe.c
File diff suppressed because it is too large
Load Diff
1018
sys/dev/fe/if_fe_cbus.c
Normal file
1018
sys/dev/fe/if_fe_cbus.c
Normal file
File diff suppressed because it is too large
Load Diff
1063
sys/dev/fe/if_fe_isa.c
Normal file
1063
sys/dev/fe/if_fe_isa.c
Normal file
File diff suppressed because it is too large
Load Diff
277
sys/dev/fe/if_fe_pccard.c
Normal file
277
sys/dev/fe/if_fe_pccard.c
Normal file
@ -0,0 +1,277 @@
|
||||
/*
|
||||
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
||||
*
|
||||
* This software may be used, modified, copied, distributed, and sold, in
|
||||
* both source and binary form provided that the above copyright, these
|
||||
* terms and the following disclaimer are retained. The name of the author
|
||||
* and/or the contributor may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
#include "opt_fe.h"
|
||||
#include "opt_inet.h"
|
||||
#include "opt_ipx.h"
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/select.h>
|
||||
#include <sys/socket.h>
|
||||
#include <sys/sockio.h>
|
||||
#include <sys/mbuf.h>
|
||||
#include <sys/module.h>
|
||||
#include <machine/clock.h>
|
||||
|
||||
#include <sys/bus.h>
|
||||
#include <machine/bus.h>
|
||||
#include <sys/rman.h>
|
||||
#include <machine/resource.h>
|
||||
|
||||
#include <net/ethernet.h>
|
||||
#include <net/if.h>
|
||||
#include <net/if_dl.h>
|
||||
#include <net/if_mib.h>
|
||||
#include <net/if_media.h>
|
||||
#include <net/if_types.h>
|
||||
|
||||
#include <netinet/in.h>
|
||||
#include <netinet/if_ether.h>
|
||||
|
||||
#include <net/bpf.h>
|
||||
|
||||
#include <i386/isa/ic/mb86960.h>
|
||||
#include <dev/fe/if_fereg.h>
|
||||
#include <dev/fe/if_fevar.h>
|
||||
|
||||
#include <dev/pccard/pccardvar.h>
|
||||
#include <pccard/cardinfo.h>
|
||||
#include <pccard/slot.h>
|
||||
|
||||
/*
|
||||
* PC-Card (PCMCIA) specific code.
|
||||
*/
|
||||
static int fe_pccard_probe(device_t);
|
||||
static int fe_pccard_attach(device_t);
|
||||
static int fe_pccard_detach(device_t);
|
||||
|
||||
static device_method_t fe_pccard_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, fe_pccard_probe),
|
||||
DEVMETHOD(device_attach, fe_pccard_attach),
|
||||
DEVMETHOD(device_detach, fe_pccard_detach),
|
||||
|
||||
{ 0, 0 }
|
||||
};
|
||||
|
||||
static driver_t fe_pccard_driver = {
|
||||
"fe",
|
||||
fe_pccard_methods,
|
||||
sizeof (struct fe_softc)
|
||||
};
|
||||
|
||||
DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
|
||||
|
||||
|
||||
static int fe_probe_mbh(device_t);
|
||||
static int fe_probe_tdk(device_t);
|
||||
|
||||
/*
|
||||
* Initialize the device - called from Slot manager.
|
||||
*/
|
||||
static int
|
||||
fe_pccard_probe(device_t dev)
|
||||
{
|
||||
struct fe_softc *sc;
|
||||
int error;
|
||||
|
||||
/* Prepare for the device probe process. */
|
||||
sc = device_get_softc(dev);
|
||||
sc->sc_unit = device_get_unit(dev);
|
||||
|
||||
pccard_get_ether(dev, sc->sc_enaddr);
|
||||
|
||||
/* Probe for supported cards. */
|
||||
if ((error = fe_probe_mbh(dev)) == 0)
|
||||
goto end;
|
||||
fe_release_resource(dev);
|
||||
|
||||
if ((error = fe_probe_tdk(dev)) == 0)
|
||||
goto end;
|
||||
fe_release_resource(dev);
|
||||
|
||||
end:
|
||||
if (error == 0)
|
||||
error = fe_alloc_irq(dev, 0);
|
||||
|
||||
fe_release_resource(dev);
|
||||
return (error);
|
||||
}
|
||||
|
||||
static int
|
||||
fe_pccard_attach(device_t dev)
|
||||
{
|
||||
struct fe_softc *sc = device_get_softc(dev);
|
||||
|
||||
if (sc->port_used)
|
||||
fe_alloc_port(dev, sc->port_used);
|
||||
fe_alloc_irq(dev, 0);
|
||||
|
||||
return fe_attach(dev);
|
||||
}
|
||||
|
||||
/*
|
||||
* feunload - unload the driver and clear the table.
|
||||
* XXX TODO:
|
||||
* This is usually called when the card is ejected, but
|
||||
* can be caused by a modunload of a controller driver.
|
||||
* The idea is to reset the driver's view of the device
|
||||
* and ensure that any driver entry points such as
|
||||
* read and write do not hang.
|
||||
*/
|
||||
static int
|
||||
fe_pccard_detach(device_t dev)
|
||||
{
|
||||
struct fe_softc *sc = device_get_softc(dev);
|
||||
struct ifnet *ifp = &sc->arpcom.ac_if;
|
||||
|
||||
fe_stop(sc);
|
||||
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
|
||||
bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
|
||||
fe_release_resource(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
|
||||
* Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
|
||||
*/
|
||||
static void
|
||||
fe_init_mbh(struct fe_softc *sc)
|
||||
{
|
||||
/* Minimal initialization of 86960. */
|
||||
DELAY(200);
|
||||
fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
|
||||
DELAY(200);
|
||||
|
||||
/* Disable all interrupts. */
|
||||
fe_outb(sc, FE_DLCR2, 0);
|
||||
fe_outb(sc, FE_DLCR3, 0);
|
||||
|
||||
/* Enable master interrupt flag. */
|
||||
fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
|
||||
}
|
||||
|
||||
static int
|
||||
fe_probe_mbh(device_t dev)
|
||||
{
|
||||
struct fe_softc *sc = device_get_softc(dev);
|
||||
|
||||
static struct fe_simple_probe_struct probe_table [] = {
|
||||
{ FE_DLCR2, 0x58, 0x00 },
|
||||
{ FE_DLCR4, 0x08, 0x00 },
|
||||
{ FE_DLCR6, 0xFF, 0xB6 },
|
||||
{ 0 }
|
||||
};
|
||||
|
||||
/* MBH10302 occupies 32 I/O addresses. */
|
||||
if (fe_alloc_port(dev, 32))
|
||||
return ENXIO;
|
||||
|
||||
/* Ethernet MAC address should *NOT* have been given by pccardd,
|
||||
if this is a true MBH10302; i.e., Ethernet address must be
|
||||
"all-zero" upon entry. */
|
||||
if (sc->sc_enaddr[0] || sc->sc_enaddr[1] || sc->sc_enaddr[2] ||
|
||||
sc->sc_enaddr[3] || sc->sc_enaddr[4] || sc->sc_enaddr[5])
|
||||
return ENXIO;
|
||||
|
||||
/* Fill the softc struct with default values. */
|
||||
fe_softc_defaults(sc);
|
||||
|
||||
/*
|
||||
* See if MBH10302 is on its address.
|
||||
* I'm not sure the following probe code works. FIXME.
|
||||
*/
|
||||
if (!fe_simple_probe(sc, probe_table))
|
||||
return ENXIO;
|
||||
|
||||
/* Get our station address from EEPROM. */
|
||||
fe_inblk(sc, FE_MBH10, sc->sc_enaddr, ETHER_ADDR_LEN);
|
||||
|
||||
/* Make sure we got a valid station address. */
|
||||
if (!valid_Ether_p(sc->sc_enaddr, 0))
|
||||
return ENXIO;
|
||||
|
||||
/* Determine the card type. */
|
||||
sc->type = FE_TYPE_MBH;
|
||||
sc->typestr = "MBH10302 (PCMCIA)";
|
||||
|
||||
/* We seems to need our own IDENT bits... FIXME. */
|
||||
sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
|
||||
|
||||
/* Setup hooks. We need a special initialization procedure. */
|
||||
sc->init = fe_init_mbh;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
|
||||
* by MASUI Kenji <masui@cs.titech.ac.jp>
|
||||
*
|
||||
* (Contec uses TDK Ethenet chip -- hosokawa)
|
||||
*
|
||||
* This version of fe_probe_tdk has been rewrote to handle
|
||||
* *generic* PC card implementation of Fujitsu MB8696x family. The
|
||||
* name _tdk is just for a historical reason. :-)
|
||||
*/
|
||||
static int
|
||||
fe_probe_tdk (device_t dev)
|
||||
{
|
||||
struct fe_softc *sc = device_get_softc(dev);
|
||||
|
||||
static struct fe_simple_probe_struct probe_table [] = {
|
||||
{ FE_DLCR2, 0x50, 0x00 },
|
||||
{ FE_DLCR4, 0x08, 0x00 },
|
||||
/* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
|
||||
{ 0 }
|
||||
};
|
||||
|
||||
/* C-NET(PC)C occupies 16 I/O addresses. */
|
||||
if (fe_alloc_port(dev, 16))
|
||||
return ENXIO;
|
||||
|
||||
/* Fill the softc struct with default values. */
|
||||
fe_softc_defaults(sc);
|
||||
|
||||
/*
|
||||
* See if C-NET(PC)C is on its address.
|
||||
*/
|
||||
if (!fe_simple_probe(sc, probe_table))
|
||||
return ENXIO;
|
||||
|
||||
/* Determine the card type. */
|
||||
sc->type = FE_TYPE_TDK;
|
||||
sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
|
||||
|
||||
/* Make sure we got a valid station address. */
|
||||
if (!valid_Ether_p(sc->sc_enaddr, 0))
|
||||
return ENXIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -76,6 +76,7 @@
|
||||
/* Card config register #1: IRQ enable */
|
||||
#define FE_FMV3_IRQENB 0x80 /* IRQ enable. */
|
||||
|
||||
|
||||
/*
|
||||
* Register(?) specific to AT1700/RE2000.
|
||||
*/
|
||||
@ -95,6 +96,7 @@
|
||||
#define FE_ATI_MODEL_AT1700FT 0x02
|
||||
#define FE_ATI_MODEL_AT1700AT 0x03
|
||||
|
||||
|
||||
/*
|
||||
* Registers on MBH10302.
|
||||
*/
|
||||
@ -110,9 +112,55 @@
|
||||
#define FE_MBH0_INTR_ENABLE 0x10 /* Enable interrupts. */
|
||||
#define FE_MBH0_INTR_DISABLE 0x00 /* Disable interrupts. */
|
||||
|
||||
|
||||
/*
|
||||
* Registers on RE1000. (*NOT* on RE1000 Plus.)
|
||||
*/
|
||||
|
||||
/* IRQ configuration. */
|
||||
#define FE_RE1000_IRQCONF 0x10
|
||||
|
||||
|
||||
/*
|
||||
* Fujitsu MB86965 JLI mode support routines.
|
||||
*/
|
||||
|
||||
/* Datasheet for 86965 explicitly states that it only supports serial
|
||||
* EEPROM with 16 words (32 bytes) capacity. (I.e., 93C06.) However,
|
||||
* ones with 64 words (128 bytes) are available in the marked, namely
|
||||
* 93C46, and are also fully compatible with 86965. It is known that
|
||||
* some boards (e.g., ICL) actually have 93C46 on them and use extra
|
||||
* storage to keep various config info. */
|
||||
#define JLI_EEPROM_SIZE 128
|
||||
|
||||
|
||||
/*
|
||||
* SSi 78Q8377A support routines.
|
||||
*/
|
||||
#define SSI_EEPROM_SIZE 512
|
||||
#define SSI_DIN 0x01
|
||||
#define SSI_DAT 0x01
|
||||
#define SSI_CSL 0x02
|
||||
#define SSI_CLK 0x04
|
||||
#define SSI_EEP 0x10
|
||||
|
||||
#define FE_SSI_EEP_IRQ 9 /* Irq ??? */
|
||||
#define FE_SSI_EEP_ADDR 16 /* Station(MAC) address */
|
||||
#define FE_SSI_EEP_DUPLEX 25 /* Duplex mode ??? */
|
||||
|
||||
|
||||
/*
|
||||
* TDK/LANX boards support routines.
|
||||
*/
|
||||
|
||||
/* AX012/AX013 equips an X24C01 chip, which has 128 bytes of memory cells. */
|
||||
#define LNX_EEPROM_SIZE 128
|
||||
|
||||
/* Bit assignments and command definitions for the serial EEPROM
|
||||
interface register in LANX ASIC. */
|
||||
#define LNX_SDA_HI 0x08 /* Drive SDA line high (logical 1.) */
|
||||
#define LNX_SDA_LO 0x00 /* Drive SDA line low (logical 0.) */
|
||||
#define LNX_SDA_FL 0x08 /* Float (don't drive) SDA line. */
|
||||
#define LNX_SDA_IN 0x01 /* Mask for reading SDA line. */
|
||||
#define LNX_CLK_HI 0x04 /* Drive clock line high (active.) */
|
||||
#define LNX_CLK_LO 0x00 /* Drive clock line low (inactive.) */
|
||||
|
||||
182
sys/dev/fe/if_fevar.h
Normal file
182
sys/dev/fe/if_fevar.h
Normal file
@ -0,0 +1,182 @@
|
||||
/*
|
||||
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
||||
*
|
||||
* This software may be used, modified, copied, distributed, and sold, in
|
||||
* both source and binary form provided that the above copyright, these
|
||||
* terms and the following disclaimer are retained. The name of the author
|
||||
* and/or the contributor may not be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/* How many registers does an fe-supported adapter have at maximum? */
|
||||
#define MAXREGISTERS 32
|
||||
|
||||
/* Shouldn't these be defined somewhere else such as isa_device.h? */
|
||||
#define NO_IRQ 0
|
||||
|
||||
/* Flags for stability. */
|
||||
#define UNSTABLE_IRQ 0x01 /* IRQ setting may be incorrect. */
|
||||
#define UNSTABLE_MAC 0x02 /* Probed MAC address may be incorrect. */
|
||||
#define UNSTABLE_TYPE 0x04 /* Probed vendor/model may be incorrect. */
|
||||
|
||||
/* Mapping between media bitmap (in fe_softc.mbitmap) and ifm_media. */
|
||||
#define MB_HA 0x0001
|
||||
#define MB_HM 0x0002
|
||||
#define MB_HT 0x0004
|
||||
#define MB_H2 0x0008
|
||||
#define MB_H5 0x0010
|
||||
#define MB_HF 0x0020
|
||||
#define MB_FT 0x0040
|
||||
|
||||
/* Card types. */
|
||||
#define FE_TYPE_SSI 1
|
||||
#define FE_TYPE_JLI 2
|
||||
#define FE_TYPE_FMV 3
|
||||
#define FE_TYPE_LNX 4
|
||||
#define FE_TYPE_UBN 5
|
||||
#define FE_TYPE_GWY 6
|
||||
#define FE_TYPE_MBH 7
|
||||
#define FE_TYPE_TDK 8
|
||||
#define FE_TYPE_RE1000 9
|
||||
#define FE_TYPE_CNET9NE 10
|
||||
#define FE_TYPE_REX 11
|
||||
|
||||
/*
|
||||
* Data type for a multicast address filter on 8696x.
|
||||
*/
|
||||
struct fe_filter {
|
||||
u_char data [FE_FILTER_LEN];
|
||||
};
|
||||
|
||||
/*
|
||||
* fe_softc: per line info and status
|
||||
*/
|
||||
struct fe_softc {
|
||||
|
||||
/* Used by "common" codes. */
|
||||
struct arpcom arpcom; /* Ethernet common */
|
||||
|
||||
/* Used by config codes. */
|
||||
int type;
|
||||
int port_used;
|
||||
struct resource * port_res;
|
||||
bus_space_tag_t iot;
|
||||
bus_space_handle_t ioh;
|
||||
struct resource * irq_res;
|
||||
void * irq_handle;
|
||||
|
||||
/* Set by probe() and not modified in later phases. */
|
||||
char const * typestr; /* printable name of the interface. */
|
||||
u_short txb_size; /* size of TX buffer, in bytes */
|
||||
u_char proto_dlcr4; /* DLCR4 prototype. */
|
||||
u_char proto_dlcr5; /* DLCR5 prototype. */
|
||||
u_char proto_dlcr6; /* DLCR6 prototype. */
|
||||
u_char proto_dlcr7; /* DLCR7 prototype. */
|
||||
u_char proto_bmpr13; /* BMPR13 prototype. */
|
||||
u_char stability; /* How stable is this? */
|
||||
u_short priv_info; /* info specific to a vendor/model. */
|
||||
|
||||
/* Vendor/model specific hooks. */
|
||||
void (*init)(struct fe_softc *); /* Just before fe_init(). */
|
||||
void (*stop)(struct fe_softc *); /* Just after fe_stop(). */
|
||||
|
||||
/* Transmission buffer management. */
|
||||
u_short txb_free; /* free bytes in TX buffer */
|
||||
u_char txb_count; /* number of packets in TX buffer */
|
||||
u_char txb_sched; /* number of scheduled packets */
|
||||
|
||||
/* Excessive collision counter (see fe_tint() for details.) */
|
||||
u_char tx_excolls; /* # of excessive collisions. */
|
||||
|
||||
/* Multicast address filter management. */
|
||||
u_char filter_change; /* MARs must be changed ASAP. */
|
||||
struct fe_filter filter;/* new filter value. */
|
||||
|
||||
/* Network management. */
|
||||
struct ifmib_iso_8802_3 mibdata;
|
||||
|
||||
/* Media information. */
|
||||
struct ifmedia media; /* used by if_media. */
|
||||
u_short mbitmap; /* bitmap for supported media; see bit2media */
|
||||
int defmedia; /* default media */
|
||||
void (* msel)(struct fe_softc *); /* media selector. */
|
||||
|
||||
};
|
||||
|
||||
#define sc_if arpcom.ac_if
|
||||
#define sc_unit arpcom.ac_if.if_unit
|
||||
#define sc_enaddr arpcom.ac_enaddr
|
||||
|
||||
|
||||
struct fe_simple_probe_struct {
|
||||
u_char port; /* Offset from the base I/O address. */
|
||||
u_char mask; /* Bits to be checked. */
|
||||
u_char bits; /* Values to be compared against. */
|
||||
};
|
||||
|
||||
|
||||
extern devclass_t fe_devclass;
|
||||
|
||||
int fe_attach(device_t);
|
||||
int fe_alloc_port(device_t, int);
|
||||
int fe_alloc_irq(device_t, int);
|
||||
void fe_release_resource(device_t);
|
||||
|
||||
int fe_simple_probe(struct fe_softc const *,
|
||||
struct fe_simple_probe_struct const *);
|
||||
int valid_Ether_p(u_char const *, unsigned);
|
||||
void fe_softc_defaults(struct fe_softc *);
|
||||
void fe_stop(struct fe_softc *sc);
|
||||
void fe_irq_failure(char const *, int, int, char const *);
|
||||
void fe_msel_965(struct fe_softc *);
|
||||
void fe_read_eeprom_jli(struct fe_softc *, u_char *);
|
||||
void fe_init_jli(struct fe_softc *);
|
||||
void fe_read_eeprom_ssi(struct fe_softc *, u_char *);
|
||||
void fe_read_eeprom_lnx(struct fe_softc *, u_char *);
|
||||
void fe_init_lnx(struct fe_softc *);
|
||||
void fe_init_ubn(struct fe_softc *);
|
||||
|
||||
|
||||
#define fe_inb(sc, port) \
|
||||
bus_space_read_1((sc)->iot, (sc)->ioh, (port))
|
||||
|
||||
#define fe_outb(sc, port, value) \
|
||||
bus_space_write_1((sc)->iot, (sc)->ioh, (port), (value))
|
||||
|
||||
#define fe_inw(sc, port) \
|
||||
bus_space_read_2((sc)->iot, (sc)->ioh, (port))
|
||||
|
||||
#define fe_outw(sc, port, value) \
|
||||
bus_space_write_2((sc)->iot, (sc)->ioh, (port), (value))
|
||||
|
||||
#define fe_insb(sc, port, addr, count) \
|
||||
bus_space_read_multi_1((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
|
||||
#define fe_outsb(sc, port, addr, count) \
|
||||
bus_space_write_multi_1((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
|
||||
#define fe_insw(sc, port, addr, count) \
|
||||
bus_space_read_multi_2((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
|
||||
#define fe_outsw(sc, port, addr, count) \
|
||||
bus_space_write_multi_2((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
|
||||
#define fe_inblk(sc, port, addr, count) \
|
||||
bus_space_read_region_1((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
|
||||
#define fe_outblk(sc, port, addr, count) \
|
||||
bus_space_write_region_1((sc)->iot, (sc)->ioh, (port), (addr), (count))
|
||||
4280
sys/i386/isa/if_fe.c
4280
sys/i386/isa/if_fe.c
File diff suppressed because it is too large
Load Diff
@ -1,118 +0,0 @@
|
||||
/*
|
||||
* Hardware specification of various 8696x based Ethernet cards.
|
||||
* Contributed by M. Sekiguchi <seki@sysrap.cs.fujitsu.co.jp>
|
||||
*
|
||||
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
||||
*
|
||||
* This software may be used, modified, copied, distributed, and sold,
|
||||
* in both source and binary form provided that the above copyright,
|
||||
* these terms and the following disclaimer are retained. The name of
|
||||
* the author and/or the contributor may not be used to endorse or
|
||||
* promote products derived from this software without specific prior
|
||||
* written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/* $FreeBSD$ */
|
||||
|
||||
/*
|
||||
* Registers on FMV-180 series' ISA bus interface ASIC.
|
||||
* I'm not sure the following register names are appropriate.
|
||||
* Doesn't it look silly, eh? FIXME.
|
||||
*/
|
||||
|
||||
#define FE_FMV0 16 /* Card status register #0 */
|
||||
#define FE_FMV1 17 /* Card status register #1 */
|
||||
#define FE_FMV2 18 /* Card config register #0 */
|
||||
#define FE_FMV3 19 /* Card config register #1 */
|
||||
#define FE_FMV4 20 /* Station address #1 */
|
||||
#define FE_FMV5 21 /* Station address #2 */
|
||||
#define FE_FMV6 22 /* Station address #3 */
|
||||
#define FE_FMV7 23 /* Station address #4 */
|
||||
#define FE_FMV8 24 /* Station address #5 */
|
||||
#define FE_FMV9 25 /* Station address #6 */
|
||||
#define FE_FMV10 26 /* Buffer RAM control register */
|
||||
#define FE_FMV11 27 /* Buffer RAM data register */
|
||||
|
||||
/*
|
||||
* FMV-180 series' ASIC register values.
|
||||
*/
|
||||
|
||||
/* FMV0: Card status register #0: Misc info? */
|
||||
#define FE_FMV0_MEDIA 0x07 /* Supported physical media. */
|
||||
#define FE_FMV0_PRRDY 0x10 /* ??? */
|
||||
#define FE_FMV0_PRERR 0x20 /* ??? */
|
||||
#define FE_FMV0_ERRDY 0x40 /* ??? */
|
||||
#define FE_FMV0_IREQ 0x80 /* ??? */
|
||||
|
||||
#define FE_FMV0_MEDIUM_5 0x01 /* 10base5/Dsub */
|
||||
#define FE_FMV0_MEDIUM_2 0x02 /* 10base2/BNC */
|
||||
#define FE_FMV0_MEDIUM_T 0x04 /* 10baseT/RJ45 */
|
||||
|
||||
/* Card status register #1: Hardware revision. */
|
||||
#define FE_FMV1_REV 0x0F /* Card revision */
|
||||
#define FE_FMV1_UPPER 0xF0 /* Usage unknown */
|
||||
|
||||
/* Card config register #0: I/O port address assignment. */
|
||||
#define FE_FMV2_IOS 0x07 /* I/O selection. */
|
||||
#define FE_FMV2_MES 0x38 /* ??? boot ROM? */
|
||||
#define FE_FMV2_IRS 0xC0 /* IRQ selection. */
|
||||
|
||||
#define FE_FMV2_IOS_SHIFT 0
|
||||
#define FE_FMV2_MES_SHIFT 3
|
||||
#define FE_FMV2_IRS_SHIFT 6
|
||||
|
||||
/* Card config register #1: IRQ enable */
|
||||
#define FE_FMV3_IRQENB 0x80 /* IRQ enable. */
|
||||
|
||||
/*
|
||||
* Register(?) specific to AT1700/RE2000.
|
||||
*/
|
||||
|
||||
#define FE_ATI_RESET 0x1F /* Write to reset the 86965. */
|
||||
|
||||
/* EEPROM allocation (offsets) of AT1700/RE2000. */
|
||||
#define FE_ATI_EEP_ADDR 0x08 /* Station address. (8-13) */
|
||||
#define FE_ATI_EEP_MEDIA 0x18 /* Media type. */
|
||||
#define FE_ATI_EEP_MAGIC 0x19 /* XXX Magic. */
|
||||
#define FE_ATI_EEP_MODEL 0x1e /* Hardware type. */
|
||||
#define FE_ATI_EEP_REVISION 0x1f /* Hardware revision. */
|
||||
|
||||
/* Value for FE_ATI_EEP_MODEL. */
|
||||
#define FE_ATI_MODEL_AT1700T 0x00
|
||||
#define FE_ATI_MODEL_AT1700BT 0x01
|
||||
#define FE_ATI_MODEL_AT1700FT 0x02
|
||||
#define FE_ATI_MODEL_AT1700AT 0x03
|
||||
|
||||
/*
|
||||
* Registers on MBH10302.
|
||||
*/
|
||||
|
||||
#define FE_MBH0 0x10 /* ??? Including interrupt. */
|
||||
#define FE_MBH1 0x11 /* ??? */
|
||||
#define FE_MBH10 0x1A /* Station address. (10 - 15) */
|
||||
|
||||
/* Values to be set in MBH0 register. */
|
||||
#define FE_MBH0_MAGIC 0x0D /* Just a magic constant? */
|
||||
#define FE_MBH0_INTR 0x10 /* Master interrupt control. */
|
||||
|
||||
#define FE_MBH0_INTR_ENABLE 0x10 /* Enable interrupts. */
|
||||
#define FE_MBH0_INTR_DISABLE 0x00 /* Disable interrupts. */
|
||||
|
||||
/*
|
||||
* Registers on RE1000. (*NOT* on RE1000 Plus.)
|
||||
*/
|
||||
|
||||
/* IRQ configuration. */
|
||||
#define FE_RE1000_IRQCONF 0x10
|
||||
Loading…
Reference in New Issue
Block a user