Sleep rather than spin in e1000 when doing long running config operations.

With r333218 it is now possible for drivers to use an sx lock and thus sleep while
waiting on long running operations rather than DELAY().

Reported by:	gallatin
Reviewed by:	sbruno
Approved by:	sbruno
MFC after:	1 month
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D14984
This commit is contained in:
mmacy 2018-05-08 01:39:45 +00:00
parent 3f10402174
commit 09b593c42b
11 changed files with 297 additions and 569 deletions

View File

@ -60,7 +60,6 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw);
static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw);
static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
@ -69,7 +68,6 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
u16 data);
static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw);
static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
@ -300,7 +298,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_phy_80003es2lan");
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
return e1000_acquire_swfw_sync(hw, mask);
}
/**
@ -316,7 +314,7 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
DEBUGFUNC("e1000_release_phy_80003es2lan");
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
e1000_release_swfw_sync_80003es2lan(hw, mask);
e1000_release_swfw_sync(hw, mask);
}
/**
@ -334,7 +332,7 @@ static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
mask = E1000_SWFW_CSR_SM;
return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
return e1000_acquire_swfw_sync(hw, mask);
}
/**
@ -351,7 +349,7 @@ static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
mask = E1000_SWFW_CSR_SM;
e1000_release_swfw_sync_80003es2lan(hw, mask);
e1000_release_swfw_sync(hw, mask);
}
/**
@ -366,14 +364,14 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_nvm_80003es2lan");
ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
ret_val = e1000_acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
if (ret_val)
return ret_val;
ret_val = e1000_acquire_nvm_generic(hw);
if (ret_val)
e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
e1000_release_swfw_sync(hw, E1000_SWFW_EEP_SM);
return ret_val;
}
@ -389,78 +387,7 @@ static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
DEBUGFUNC("e1000_release_nvm_80003es2lan");
e1000_release_nvm_generic(hw);
e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
}
/**
* e1000_acquire_swfw_sync_80003es2lan - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
* will also specify which port we're acquiring the lock for.
**/
static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 i = 0;
s32 timeout = 50;
DEBUGFUNC("e1000_acquire_swfw_sync_80003es2lan");
while (i < timeout) {
if (e1000_get_hw_semaphore_generic(hw))
return -E1000_ERR_SWFW_SYNC;
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
if (!(swfw_sync & (fwmask | swmask)))
break;
/* Firmware currently using resource (fwmask)
* or other software thread using resource (swmask)
*/
e1000_put_hw_semaphore_generic(hw);
msec_delay_irq(5);
i++;
}
if (i == timeout) {
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
return -E1000_ERR_SWFW_SYNC;
}
swfw_sync |= swmask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
return E1000_SUCCESS;
}
/**
* e1000_release_swfw_sync_80003es2lan - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
* will also specify which port we're releasing the lock for.
**/
static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
DEBUGFUNC("e1000_release_swfw_sync_80003es2lan");
while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS)
; /* Empty */
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
e1000_release_swfw_sync(hw, E1000_SWFW_EEP_SM);
}
/**

View File

@ -71,11 +71,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data);
static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw);
static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw,
@ -126,8 +123,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
phy->ops.read_reg = e1000_read_phy_reg_igp;
phy->ops.write_reg = e1000_write_phy_reg_igp;
phy->ops.acquire = e1000_get_hw_semaphore_82571;
phy->ops.release = e1000_put_hw_semaphore_82571;
phy->ops.acquire = e1000_get_hw_semaphore;
phy->ops.release = e1000_put_hw_semaphore;
break;
case e1000_82573:
phy->type = e1000_phy_m88;
@ -139,12 +136,11 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
phy->ops.get_cable_length = e1000_get_cable_length_m88;
phy->ops.read_reg = e1000_read_phy_reg_m88;
phy->ops.write_reg = e1000_write_phy_reg_m88;
phy->ops.acquire = e1000_get_hw_semaphore_82571;
phy->ops.release = e1000_put_hw_semaphore_82571;
phy->ops.acquire = e1000_get_hw_semaphore;
phy->ops.release = e1000_put_hw_semaphore;
break;
case e1000_82574:
case e1000_82583:
E1000_MUTEX_INIT(&hw->dev_spec._82571.swflag_mutex);
phy->type = e1000_phy_bm;
phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
@ -507,99 +503,21 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
}
/**
* e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
**/
static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
{
u32 swsm;
s32 sw_timeout = hw->nvm.word_size + 1;
s32 fw_timeout = hw->nvm.word_size + 1;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_82571");
/* If we have timedout 3 times on trying to acquire
* the inter-port SMBI semaphore, there is old code
* operating on the other port, and it is not
* releasing SMBI. Modify the number of times that
* we try for the semaphore to interwork with this
* older code.
*/
if (hw->dev_spec._82571.smb_counter > 2)
sw_timeout = 1;
/* Get the SW semaphore */
while (i < sw_timeout) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
i++;
}
if (i == sw_timeout) {
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
hw->dev_spec._82571.smb_counter++;
}
/* Get the FW semaphore. */
for (i = 0; i < fw_timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
usec_delay(50);
}
if (i == fw_timeout) {
/* Release semaphores */
e1000_put_hw_semaphore_82571(hw);
DEBUGOUT("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return E1000_SUCCESS;
}
/**
* e1000_put_hw_semaphore_82571 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
{
u32 swsm;
DEBUGFUNC("e1000_put_hw_semaphore_generic");
swsm = E1000_READ_REG(hw, E1000_SWSM);
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, E1000_SWSM, swsm);
}
/**
* e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
* e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore during reset.
*
**/
static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
static s32
e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
{
u32 extcnf_ctrl;
s32 i = 0;
/* XXX assert that mutex is held */
DEBUGFUNC("e1000_get_hw_semaphore_82573");
ASSERT_CTX_LOCK_HELD(hw);
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
do {
extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
@ -615,7 +533,7 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
if (i == MDIO_OWNERSHIP_TIMEOUT) {
/* Release semaphores */
e1000_put_hw_semaphore_82573(hw);
e1000_put_hw_semaphore_82574(hw);
DEBUGOUT("Driver can't access the PHY\n");
return -E1000_ERR_PHY;
}
@ -624,58 +542,24 @@ static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
}
/**
* e1000_put_hw_semaphore_82573 - Release hardware semaphore
* e1000_put_hw_semaphore_82574 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used during reset.
*
**/
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
static void
e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
{
u32 extcnf_ctrl;
DEBUGFUNC("e1000_put_hw_semaphore_82573");
DEBUGFUNC("e1000_put_hw_semaphore_82574");
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
}
/**
* e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM.
*
**/
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
{
s32 ret_val;
DEBUGFUNC("e1000_get_hw_semaphore_82574");
E1000_MUTEX_LOCK(&hw->dev_spec._82571.swflag_mutex);
ret_val = e1000_get_hw_semaphore_82573(hw);
if (ret_val)
E1000_MUTEX_UNLOCK(&hw->dev_spec._82571.swflag_mutex);
return ret_val;
}
/**
* e1000_put_hw_semaphore_82574 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
*
**/
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_put_hw_semaphore_82574");
e1000_put_hw_semaphore_82573(hw);
E1000_MUTEX_UNLOCK(&hw->dev_spec._82571.swflag_mutex);
}
/**
* e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
@ -747,7 +631,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_nvm_82571");
ret_val = e1000_get_hw_semaphore_82571(hw);
ret_val = e1000_get_hw_semaphore(hw);
if (ret_val)
return ret_val;
@ -760,7 +644,7 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
}
if (ret_val)
e1000_put_hw_semaphore_82571(hw);
e1000_put_hw_semaphore(hw);
return ret_val;
}
@ -776,7 +660,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw)
DEBUGFUNC("e1000_release_nvm_82571");
e1000_release_nvm_generic(hw);
e1000_put_hw_semaphore_82571(hw);
e1000_put_hw_semaphore(hw);
}
/**
@ -1093,8 +977,6 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
*/
switch (hw->mac.type) {
case e1000_82573:
ret_val = e1000_get_hw_semaphore_82573(hw);
break;
case e1000_82574:
case e1000_82583:
ret_val = e1000_get_hw_semaphore_82574(hw);
@ -1111,10 +993,6 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
/* Must release MDIO ownership and mutex after MAC reset. */
switch (hw->mac.type) {
case e1000_82573:
/* Release mutex only if the hw semaphore is acquired */
if (!ret_val)
e1000_put_hw_semaphore_82573(hw);
break;
case e1000_82574:
case e1000_82583:
/* Release mutex only if the hw semaphore is acquired */
@ -1122,6 +1000,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
e1000_put_hw_semaphore_82574(hw);
break;
default:
panic("unknown mac type %x\n", hw->mac.type);
break;
}

View File

@ -80,11 +80,9 @@ static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data);
static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw,
u32 offset, u16 data);
static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw);
static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
u16 *speed, u16 *duplex);
static s32 e1000_get_phy_id_82575(struct e1000_hw *hw);
static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
static bool e1000_sgmii_active_82575(struct e1000_hw *hw);
static s32 e1000_reset_init_script_82575(struct e1000_hw *hw);
static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw);
@ -512,12 +510,8 @@ static s32 e1000_init_mac_params_82575(struct e1000_hw *hw)
/* link info */
mac->ops.get_link_up_info = e1000_get_link_up_info_82575;
/* acquire SW_FW sync */
mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575;
mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575;
if (mac->type >= e1000_i210) {
mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210;
mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210;
}
mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync;
mac->ops.release_swfw_sync = e1000_release_swfw_sync;
/* set lan id for port to determine which phy lock to use */
hw->mac.ops.set_lan_id(hw);
@ -989,7 +983,7 @@ static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_nvm_82575");
ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
ret_val = e1000_acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
if (ret_val)
goto out;
@ -1020,7 +1014,7 @@ static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw)
ret_val = e1000_acquire_nvm_generic(hw);
if (ret_val)
e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
e1000_release_swfw_sync(hw, E1000_SWFW_EEP_SM);
out:
return ret_val;
@ -1039,83 +1033,7 @@ static void e1000_release_nvm_82575(struct e1000_hw *hw)
e1000_release_nvm_generic(hw);
e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
}
/**
* e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
* will also specify which port we're acquiring the lock for.
**/
static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 ret_val = E1000_SUCCESS;
s32 i = 0, timeout = 200;
DEBUGFUNC("e1000_acquire_swfw_sync_82575");
while (i < timeout) {
if (e1000_get_hw_semaphore_generic(hw)) {
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
if (!(swfw_sync & (fwmask | swmask)))
break;
/*
* Firmware currently using resource (fwmask)
* or other software thread using resource (swmask)
*/
e1000_put_hw_semaphore_generic(hw);
msec_delay_irq(5);
i++;
}
if (i == timeout) {
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync |= swmask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
out:
return ret_val;
}
/**
* e1000_release_swfw_sync_82575 - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
* will also specify which port we're releasing the lock for.
**/
static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
DEBUGFUNC("e1000_release_swfw_sync_82575");
while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS)
; /* Empty */
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
e1000_release_swfw_sync(hw, E1000_SWFW_EEP_SM);
}
/**

View File

@ -944,7 +944,6 @@ struct e1000_dev_spec_82543 {
struct e1000_dev_spec_82571 {
bool laa_is_present;
u32 smb_counter;
E1000_MUTEX swflag_mutex;
};
struct e1000_dev_spec_80003es2lan {
@ -968,8 +967,6 @@ enum e1000_ulp_state {
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_SHADOW_RAM_WORDS];
E1000_MUTEX nvm_mutex;
E1000_MUTEX swflag_mutex;
bool nvm_k1_enabled;
bool disable_k1_off;
bool eee_disable;

View File

@ -38,7 +38,6 @@
static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw);
static void e1000_release_nvm_i210(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw);
static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
u16 *data);
static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw);
@ -59,7 +58,7 @@ static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_nvm_i210");
ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
ret_val = e1000_acquire_swfw_sync(hw, E1000_SWFW_EEP_SM);
return ret_val;
}
@ -75,152 +74,7 @@ static void e1000_release_nvm_i210(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_release_nvm_i210");
e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
}
/**
* e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
* will also specify which port we're acquiring the lock for.
**/
s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 ret_val = E1000_SUCCESS;
s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
DEBUGFUNC("e1000_acquire_swfw_sync_i210");
while (i < timeout) {
if (e1000_get_hw_semaphore_i210(hw)) {
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
if (!(swfw_sync & (fwmask | swmask)))
break;
/*
* Firmware currently using resource (fwmask)
* or other software thread using resource (swmask)
*/
e1000_put_hw_semaphore_generic(hw);
msec_delay_irq(5);
i++;
}
if (i == timeout) {
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync |= swmask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
out:
return ret_val;
}
/**
* e1000_release_swfw_sync_i210 - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
* will also specify which port we're releasing the lock for.
**/
void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
DEBUGFUNC("e1000_release_swfw_sync_i210");
while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS)
; /* Empty */
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore_generic(hw);
}
/**
* e1000_get_hw_semaphore_i210 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
**/
static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw)
{
u32 swsm;
s32 timeout = hw->nvm.word_size + 1;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_i210");
/* Get the SW semaphore */
while (i < timeout) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
i++;
}
if (i == timeout) {
/* In rare circumstances, the SW semaphore may already be held
* unintentionally. Clear the semaphore once before giving up.
*/
if (hw->dev_spec._82575.clear_semaphore_once) {
hw->dev_spec._82575.clear_semaphore_once = FALSE;
e1000_put_hw_semaphore_generic(hw);
for (i = 0; i < timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
}
}
/* If we do not have the semaphore here, we have to give up. */
if (i == timeout) {
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
return -E1000_ERR_NVM;
}
}
/* Get the FW semaphore. */
for (i = 0; i < timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
usec_delay(50);
}
if (i == timeout) {
/* Release semaphores */
e1000_put_hw_semaphore_generic(hw);
DEBUGOUT("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return E1000_SUCCESS;
e1000_release_swfw_sync(hw, E1000_SWFW_EEP_SM);
}
/**

View File

@ -44,8 +44,6 @@ s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
u16 *data);
s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,

View File

@ -697,9 +697,6 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
dev_spec->shadow_ram[i].value = 0xFFFF;
}
E1000_MUTEX_INIT(&dev_spec->nvm_mutex);
E1000_MUTEX_INIT(&dev_spec->swflag_mutex);
/* Function Pointers */
nvm->ops.acquire = e1000_acquire_nvm_ich8lan;
nvm->ops.release = e1000_release_nvm_ich8lan;
@ -1852,7 +1849,7 @@ static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_acquire_nvm_ich8lan");
E1000_MUTEX_LOCK(&hw->dev_spec.ich8lan.nvm_mutex);
ASSERT_CTX_LOCK_HELD(hw);
return E1000_SUCCESS;
}
@ -1867,9 +1864,7 @@ static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_release_nvm_ich8lan");
E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.nvm_mutex);
return;
ASSERT_CTX_LOCK_HELD(hw);
}
/**
@ -1886,7 +1881,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
DEBUGFUNC("e1000_acquire_swflag_ich8lan");
E1000_MUTEX_LOCK(&hw->dev_spec.ich8lan.swflag_mutex);
ASSERT_CTX_LOCK_HELD(hw);
while (timeout) {
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
@ -1927,9 +1922,6 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
}
out:
if (ret_val)
E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex);
return ret_val;
}
@ -1954,10 +1946,6 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
} else {
DEBUGOUT("Semaphore unexpectedly released by sw/fw/hw\n");
}
E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex);
return;
}
/**
@ -5032,8 +5020,6 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
E1000_WRITE_REG(hw, E1000_FEXTNVM3, reg);
}
if (!ret_val)
E1000_MUTEX_UNLOCK(&hw->dev_spec.ich8lan.swflag_mutex);
if (ctrl & E1000_CTRL_PHY_RST) {
ret_val = hw->phy.ops.get_cfg_done(hw);

View File

@ -1707,76 +1707,6 @@ s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSED
return E1000_SUCCESS;
}
/**
* e1000_get_hw_semaphore_generic - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
**/
s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw)
{
u32 swsm;
s32 timeout = hw->nvm.word_size + 1;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_generic");
/* Get the SW semaphore */
while (i < timeout) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
i++;
}
if (i == timeout) {
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
return -E1000_ERR_NVM;
}
/* Get the FW semaphore. */
for (i = 0; i < timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
usec_delay(50);
}
if (i == timeout) {
/* Release semaphores */
e1000_put_hw_semaphore_generic(hw);
DEBUGOUT("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return E1000_SUCCESS;
}
/**
* e1000_put_hw_semaphore_generic - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
void e1000_put_hw_semaphore_generic(struct e1000_hw *hw)
{
u32 swsm;
DEBUGFUNC("e1000_put_hw_semaphore_generic");
swsm = E1000_READ_REG(hw, E1000_SWSM);
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, E1000_SWSM, swsm);
}
/**
* e1000_get_auto_rd_done_generic - Check for auto read completion
* @hw: pointer to the HW structure
@ -2252,3 +2182,186 @@ s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
return E1000_SUCCESS;
}
/**
* e1000_get_hw_semaphore - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
**/
s32 e1000_get_hw_semaphore(struct e1000_hw *hw)
{
u32 swsm;
s32 timeout = hw->nvm.word_size + 1;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore");
#ifdef notyet
/* _82571 */
/* If we have timedout 3 times on trying to acquire
* the inter-port SMBI semaphore, there is old code
* operating on the other port, and it is not
* releasing SMBI. Modify the number of times that
* we try for the semaphore to interwork with this
* older code.
*/
if (hw->dev_spec._82571.smb_counter > 2)
sw_timeout = 1;
#endif
/* Get the SW semaphore */
while (i < timeout) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
i++;
}
if (i == timeout) {
#ifdef notyet
/*
* XXX This sounds more like a driver bug whereby we either
* recursed accidentally or missed clearing it previously
*/
/* In rare circumstances, the SW semaphore may already be held
* unintentionally. Clear the semaphore once before giving up.
*/
if (hw->dev_spec._82575.clear_semaphore_once) {
hw->dev_spec._82575.clear_semaphore_once = FALSE;
e1000_put_hw_semaphore_generic(hw);
for (i = 0; i < timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
}
}
#endif
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
return -E1000_ERR_NVM;
}
/* Get the FW semaphore. */
for (i = 0; i < timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
usec_delay(50);
}
if (i == timeout) {
/* Release semaphores */
e1000_put_hw_semaphore(hw);
DEBUGOUT("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return E1000_SUCCESS;
}
/**
* e1000_put_hw_semaphore - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
void e1000_put_hw_semaphore(struct e1000_hw *hw)
{
u32 swsm;
DEBUGFUNC("e1000_put_hw_semaphore");
swsm = E1000_READ_REG(hw, E1000_SWSM);
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, E1000_SWSM, swsm);
}
/**
* e1000_acquire_swfw_sync - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
* will also specify which port we're acquiring the lock for.
**/
s32
e1000_acquire_swfw_sync(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
u32 swmask = mask;
u32 fwmask = mask << 16;
s32 ret_val = E1000_SUCCESS;
s32 i = 0, timeout = 200;
DEBUGFUNC("e1000_acquire_swfw_sync");
ASSERT_NO_LOCKS();
while (i < timeout) {
if (e1000_get_hw_semaphore(hw)) {
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
if (!(swfw_sync & (fwmask | swmask)))
break;
/*
* Firmware currently using resource (fwmask)
* or other software thread using resource (swmask)
*/
e1000_put_hw_semaphore(hw);
msec_delay_irq(5);
i++;
}
if (i == timeout) {
DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
ret_val = -E1000_ERR_SWFW_SYNC;
goto out;
}
swfw_sync |= swmask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore(hw);
out:
return ret_val;
}
/**
* e1000_release_swfw_sync - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
* will also specify which port we're releasing the lock for.
**/
void
e1000_release_swfw_sync(struct e1000_hw *hw, u16 mask)
{
u32 swfw_sync;
DEBUGFUNC("e1000_release_swfw_sync");
while (e1000_get_hw_semaphore(hw) != E1000_SUCCESS)
; /* Empty */
swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
swfw_sync &= ~mask;
E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
e1000_put_hw_semaphore(hw);
}

View File

@ -61,7 +61,6 @@ s32 e1000_get_bus_info_pci_generic(struct e1000_hw *hw);
s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw);
void e1000_set_lan_id_single_port(struct e1000_hw *hw);
void e1000_set_lan_id_multi_port_pci(struct e1000_hw *hw);
s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw);
s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
u16 *duplex);
s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw,
@ -86,11 +85,15 @@ void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw);
void e1000_clear_vfta_generic(struct e1000_hw *hw);
void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count);
void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw);
void e1000_put_hw_semaphore_generic(struct e1000_hw *hw);
s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
void e1000_reset_adaptive_generic(struct e1000_hw *hw);
void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop);
void e1000_update_adaptive_generic(struct e1000_hw *hw);
void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
s32 e1000_get_hw_semaphore(struct e1000_hw *hw);
void e1000_put_hw_semaphore(struct e1000_hw *hw);
s32 e1000_acquire_swfw_sync(struct e1000_hw *hw, u16 mask);
void e1000_release_swfw_sync(struct e1000_hw *hw, u16 mask);
#endif

View File

@ -40,6 +40,7 @@
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/mbuf.h>
@ -48,6 +49,14 @@
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/iflib.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
@ -59,11 +68,40 @@
#define ASSERT(x) if(!(x)) panic("EM: x")
#define us_scale(x) max(1, (x/(1000000/hz)))
static inline int
ms_scale(int x) {
if (hz == 1000) {
return (x);
} else if (hz > 1000) {
return (x*(hz/1000));
} else {
return (max(1, x/(1000/hz)));
}
}
#define usec_delay(x) DELAY(x)
static inline void
safe_pause_us(int x) {
if (cold) {
DELAY(x);
} else {
pause("e1000_delay", max(1, x/(1000000/hz)));
}
}
static inline void
safe_pause_ms(int x) {
if (cold) {
DELAY(x*1000);
} else {
pause("e1000_delay", ms_scale(x));
}
}
#define usec_delay(x) safe_pause_us(x)
#define usec_delay_irq(x) usec_delay(x)
#define msec_delay(x) DELAY(1000*(x))
#define msec_delay_irq(x) DELAY(1000*(x))
#define msec_delay(x) safe_pause_ms(x)
#define msec_delay_irq(x) msec_delay(x)
/* Enable/disable debugging statements in shared code */
#define DBG 0
@ -82,16 +120,6 @@
#define CMD_MEM_WRT_INVALIDATE 0x0010 /* BIT_4 */
#define PCI_COMMAND_REGISTER PCIR_COMMAND
/* Mutex used in the shared code */
#define E1000_MUTEX struct mtx
#define E1000_MUTEX_INIT(mutex) mtx_init((mutex), #mutex, \
MTX_NETWORK_LOCK, \
MTX_DEF | MTX_DUPOK)
#define E1000_MUTEX_DESTROY(mutex) mtx_destroy(mutex)
#define E1000_MUTEX_LOCK(mutex) mtx_lock(mutex)
#define E1000_MUTEX_TRYLOCK(mutex) mtx_trylock(mutex)
#define E1000_MUTEX_UNLOCK(mutex) mtx_unlock(mutex)
typedef uint64_t u64;
typedef uint32_t u32;
typedef uint16_t u16;
@ -117,6 +145,12 @@ typedef int8_t s8;
#endif
#endif /*__FreeBSD_version < 800000 */
#ifdef INVARIANTS
#define ASSERT_CTX_LOCK_HELD(hw) (sx_assert(iflib_ctx_lock_get(((struct e1000_osdep *)hw->back)->ctx), SX_XLOCKED))
#else
#define ASSERT_CTX_LOCK_HELD(hw)
#endif
#if defined(__i386__) || defined(__amd64__)
static __inline
void prefetch(void *x)
@ -136,6 +170,7 @@ struct e1000_osdep
bus_space_tag_t flash_bus_space_tag;
bus_space_handle_t flash_bus_space_handle;
device_t dev;
if_ctx_t ctx;
};
#define E1000_REGISTER(hw, reg) (((hw)->mac.type >= e1000_82543) \
@ -217,5 +252,22 @@ struct e1000_osdep
bus_space_write_2(((struct e1000_osdep *)(hw)->back)->flash_bus_space_tag, \
((struct e1000_osdep *)(hw)->back)->flash_bus_space_handle, reg, value)
#if defined(INVARIANTS)
#include <sys/proc.h>
#define ASSERT_NO_LOCKS() \
do { \
int unknown_locks = curthread->td_locks - mtx_owned(&Giant); \
if (unknown_locks > 0) { \
WITNESS_WARN(WARN_GIANTOK|WARN_SLEEPOK|WARN_PANIC, NULL, "unexpected non-sleepable lock"); \
} \
MPASS(curthread->td_rw_rlocks == 0); \
MPASS(curthread->td_lk_slocks == 0); \
} while (0)
#else
#define ASSERT_NO_LOCKS()
#endif
#endif /* _FREEBSD_OS_H_ */

View File

@ -736,7 +736,7 @@ em_if_attach_pre(if_ctx_t ctx)
return (ENXIO);
}
adapter->ctx = ctx;
adapter->ctx = adapter->osdep.ctx = ctx;
adapter->dev = adapter->osdep.dev = dev;
scctx = adapter->shared = iflib_get_softc_ctx(ctx);
adapter->media = iflib_get_media(ctx);
@ -1684,13 +1684,6 @@ em_if_timer(if_ctx_t ctx, uint16_t qid)
return;
iflib_admin_intr_deferred(ctx);
/* Reset LAA into RAR[0] on 82571 */
if ((adapter->hw.mac.type == e1000_82571) &&
e1000_get_laa_state_82571(&adapter->hw))
e1000_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
if (adapter->hw.mac.type < em_mac_min)
lem_smartspeed(adapter);
/* Mask to use in the irq trigger */
if (adapter->intr_type == IFLIB_INTR_MSIX) {
@ -1801,6 +1794,14 @@ em_if_update_admin_status(if_ctx_t ctx)
}
em_update_stats_counters(adapter);
/* Reset LAA into RAR[0] on 82571 */
if ((adapter->hw.mac.type == e1000_82571) &&
e1000_get_laa_state_82571(&adapter->hw))
e1000_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
if (adapter->hw.mac.type < em_mac_min)
lem_smartspeed(adapter);
E1000_WRITE_REG(&adapter->hw, E1000_IMS, EM_MSIX_LINK | E1000_IMS_LSC);
}