Update to include all supported chips.
Add a table comparing the features of all aic7xxx chips. Clean up the discussion of SCB paging. Reviewed by: Kenneth Merry <ken@FreeBSD.org>
This commit is contained in:
Justin T. Gibbs
parent
28ed4514a2
commit
0effaa9f7e
@ -1,5 +1,5 @@
|
||||
.\"
|
||||
.\" Copyright (c) 1995, 1996, 1997
|
||||
.\" Copyright (c) 1995, 1996, 1997, 1998
|
||||
.\" Justin T. Gibbs. All rights reserved.
|
||||
.\"
|
||||
.\" Redistribution and use in source and binary forms, with or without
|
||||
@ -24,9 +24,9 @@
|
||||
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
.\"
|
||||
.\" $Id: ahc.4,v 1.11 1998/06/08 06:11:58 jkoshy Exp $
|
||||
.\" $Id: ahc.4,v 1.12 1998/06/13 19:06:49 steve Exp $
|
||||
.\"
|
||||
.Dd April 20, 1996
|
||||
.Dd October 15, 1998
|
||||
.Dt AHC 4 i386
|
||||
.Os FreeBSD
|
||||
.Sh NAME
|
||||
@ -41,12 +41,6 @@ For one or more PCI cards:
|
||||
.Cd controller pci0
|
||||
.Cd controller ahc0
|
||||
.Pp
|
||||
To enable SCB paging:
|
||||
.Cd options AHC_SCBPAGING_ENABLE
|
||||
.Pp
|
||||
To enable tagged queueing:
|
||||
.Cd options AHC_TAGENABLE
|
||||
.Pp
|
||||
To allow PCI adapters to use memory mapped I/O if enabled:
|
||||
.Cd options AHC_ALLOW_MEMIO
|
||||
.Pp
|
||||
@ -55,59 +49,49 @@ For one or more SCSI busses:
|
||||
.Sh DESCRIPTION
|
||||
This driver provides access to the
|
||||
.Tn SCSI
|
||||
bus(es) connected to Adaptec
|
||||
274x, 284x, 2940, 3940, or controllers based on the
|
||||
bus(es) connected to Adaptec
|
||||
.Tn AIC7770,
|
||||
.Tn AIC7850,
|
||||
.Tn AIC7860,
|
||||
.Tn AIC7870,
|
||||
.Tn AIC7880,
|
||||
.Tn AIC7890,
|
||||
.Tn AIC7891,
|
||||
.Tn AIC7895,
|
||||
.Tn AIC7896,
|
||||
or
|
||||
.Tn AIC7880
|
||||
.Tn AIC7897
|
||||
host adapter chips.
|
||||
Features include support for twin and wide busses,
|
||||
ultra
|
||||
.Tn SCSI,
|
||||
two active commands at a time per non-tagged queueing target,
|
||||
tagged queuing,
|
||||
These chips are found on many motherboards as well as the following
|
||||
Adaptec SCSI controller cards:
|
||||
.Tn 274X(W),
|
||||
.Tn 274X(T),
|
||||
.Tn 284X,
|
||||
.Tn 2920C,
|
||||
.Tn 2940,
|
||||
.Tn 2940U,
|
||||
.Tn 2940AU,
|
||||
.Tn 2940UW,
|
||||
.Tn 2940UW Dual,
|
||||
.Tn 2940U2W,
|
||||
.Tn 2940U2B,
|
||||
.Tn 2950U2W,
|
||||
.Tn 2950U2B,
|
||||
.Tn 3940,
|
||||
.Tn 3940U,
|
||||
.Tn 3940AU,
|
||||
.Tn 3940UW,
|
||||
.Tn 3940AUW,
|
||||
.Tn 3940U2W,
|
||||
and
|
||||
.Tn 3985.
|
||||
.Pp
|
||||
Driver features include support for twin and wide busses,
|
||||
fast, ultra and ultra2 synchronous transfers depending on controller type,
|
||||
tagged queueing,
|
||||
and SCB paging.
|
||||
.Pp
|
||||
The number of concurrent transactions allowed is chip dependent
|
||||
and ranges from 3 to 16.
|
||||
On PCI adapters,
|
||||
this number can be increased with the SCB paging option.
|
||||
SCB paging implements an algorithm to 'page-out' transactions
|
||||
that are in the disconnected state so that the freed space in
|
||||
the controller's memory can be used to start additional transactions.
|
||||
On the aic7880 and aic7870,
|
||||
this increases the maximum number of outstanding transactions from 16 to 255.
|
||||
On the aic7850 and aic7860 controllers, this maximum rises from 3 to 8.
|
||||
During the hardware probe,
|
||||
a diagnostic showing the ratio of hardware supported 'slots' to number
|
||||
of transactions is printed.
|
||||
SCB paging is enabled with the
|
||||
.Dq Dv AHC_SCBPAGING_ENABLE
|
||||
configuration option.
|
||||
This option will likely be removed and become the default behavior for
|
||||
adapters that support it,
|
||||
in the near future.
|
||||
.Pp
|
||||
Tagged queueing is enabled with the
|
||||
.Dq Dv AHC_TAGENABLE
|
||||
configuration option.
|
||||
Tagged queueing allows multiple transactions to be queued at the device
|
||||
level instead of the host level,
|
||||
allowing the device to re-order I/O to minimize seeks,
|
||||
seek distance,
|
||||
and to increase throughput.
|
||||
Tagged queueing can have a significant impact on performance for seek
|
||||
bound applications and should be enabled for most configurations.
|
||||
Unfortunately, some devices that claim to support tagged queueing fail
|
||||
miserably when it is used.
|
||||
The only reason tagged queueing remains as a controller option is as a
|
||||
stop gap measure until a mechanism to detect these broken devices and to
|
||||
control this feature on a per device basis is in place.
|
||||
.Pp
|
||||
Memory mapped I/O can be enabled with the
|
||||
Memory mapped I/O can be enabled for PCI devices with the
|
||||
.Dq Dv AHC_ALLOW_MEMIO
|
||||
configuration option.
|
||||
Memory mapped I/O is more efficient than the alternative, programmed I/O.
|
||||
@ -139,7 +123,12 @@ must be enabled for
|
||||
adaptors. This includes synchronous/asynchronous transfers,
|
||||
maximum synchronous negotiation rate,
|
||||
disconnection,
|
||||
and the host adapter's SCSI ID.
|
||||
the host adapter's SCSI ID,
|
||||
and,
|
||||
in the case of
|
||||
.Tn EISA
|
||||
Twin Channel controllers,
|
||||
the primary channel selection.
|
||||
.Pp
|
||||
Note that I/O addresses are determined automatically by the probe routines,
|
||||
but care should be taken when using a 284x
|
||||
@ -151,35 +140,110 @@ system. Ensure that the jumpers setting the I/O area for the 284x match the
|
||||
slot into which the card is inserted to prevent conflicts with other
|
||||
.Tn EISA
|
||||
cards.
|
||||
.Pp
|
||||
Performance and feature sets vary throughout the aic7xxx product line.
|
||||
The following table provides a comparison of the different chips supported
|
||||
by the
|
||||
.Nm
|
||||
driver. Note that wide and twin channel features, although always supported
|
||||
by a particular chip, may be disabled in a particular motherboard or card
|
||||
design.
|
||||
.Pp
|
||||
.Bd -filled -offset indent
|
||||
.Bl -column "aic7770 " "10 " "EISA/VL " "10MHz " "16bit " "SCBs " Features
|
||||
.Em "Chip MIPS Bus MaxSync MaxWidth SCBs Features"
|
||||
aic7770 10 EISA/VL 10MHz 16Bit 4 1
|
||||
aic7850 10 PCI/32 10MHz 8Bit 3
|
||||
aic7860 10 PCI/32 20MHz 8Bit 3
|
||||
aic7870 10 PCI/32 10MHz 16Bit 16
|
||||
aic7880 10 PCI/32 20MHz 16Bit 16
|
||||
aic7890 20 PCI/32 40MHz 16Bit 16 3 4 5 6 7
|
||||
aic7891 20 PCI/64 40MHz 16Bit 16 3 4 5 6 7
|
||||
aic7895 15 PCI/32 20MHz 16Bit 16 2 3 4 5
|
||||
aic7896 20 PCI/32 40MHz 16Bit 16 2 3 4 5 6 7
|
||||
aic7897 20 PCI/64 40MHz 16Bit 16 2 3 4 5 6 7
|
||||
.El
|
||||
.Pp
|
||||
.Bl -enum -compact
|
||||
.It
|
||||
Multiplexed Twin Channel Device - One controller servicing two busses.
|
||||
.It
|
||||
Multi-function Twin Channel Device - Two controllers on one chip.
|
||||
.It
|
||||
Command Channel Secondary DMA Engine - Allows scatter gather list and
|
||||
SCB prefetch.
|
||||
.It
|
||||
64 Byte SCB Support - SCSI CDB is embedded in the SCB to eliminate an extra DMA.
|
||||
.It
|
||||
Block Move Instruction Support - Doubles the speed of certain sequencer
|
||||
operations.
|
||||
.It
|
||||
.Sq Bayonet
|
||||
style Scatter Gather Engine - Improves S/G prefetch performance.
|
||||
.It
|
||||
Queueing Registers - Allows queueing of new transactions without pausing the
|
||||
sequencer.
|
||||
.El
|
||||
.Ed
|
||||
.Pp
|
||||
|
||||
.Sh SCSI CONTROL BLOCKS (SCBs)
|
||||
Every transaction sent to a device on the SCSI bus is assigned a
|
||||
.Sq SCSI Control Block
|
||||
(SCB). The SCB contains all of the information required by the
|
||||
controller to process a transaction. The chip feature table lists
|
||||
the number of SCBs that can be stored in on chip memory. All chips
|
||||
with model numbers greater than or equal to 7870 allow for the on chip
|
||||
SCB space to be augmented with external SRAM up to a maximum of 255 SCBs.
|
||||
Very few Adaptec controller have external SRAM.
|
||||
|
||||
If external SRAM is not available, SCBs are a limited resource and
|
||||
using them in a straight forward manner would only allow us to
|
||||
keep as many transactions as there are SCBs outstanding at a time.
|
||||
This would not allow enough concurrency to fully utilize the SCSI
|
||||
bus and it's devices. The solution to this problem is
|
||||
.Em SCB Paging ,
|
||||
a concept similar to memory paging. SCB paging takes advantage of
|
||||
the fact that devices usually disconnect from the SCSI bus for long
|
||||
periods of time without talking to the controller. The SCBs
|
||||
for disconnected transactions are only of use to the controller
|
||||
when the transfer is resumed. When the host queues another transaction
|
||||
for the controller to execute, the controller firmware will use a
|
||||
free SCB if one is available. Otherwise, the state of the most recently
|
||||
disconnected (and therefor most likely to stay disconnected) SCB is
|
||||
saved, via dma, to host memory, and the local SCB reused to start
|
||||
the new transaction. This allows the controller to queue up to
|
||||
255 transactions regardless of the amount of SCB space. Since the
|
||||
local SCB space serves as a cache for disconnected transactions, the
|
||||
more SCB space available, the less host bus traffic consumed saving
|
||||
and restoring SCB data.
|
||||
.Sh BUGS
|
||||
Some Quantum drives (at least the Empire 2100 and 1080s) will not run on an
|
||||
.Tn AIC7870
|
||||
Rev B in synchronous mode at 10MHz. Controllers with this problem have a
|
||||
42 MHz clock crystal on them and run slightly above 10MHz. This causes the
|
||||
drive much confusion. Setting a maximum synchronous negotiation rate of 8MHz
|
||||
in the
|
||||
42 MHz clock crystal on them and run slightly above 10MHz. This confuses
|
||||
the drive and hangs the bus. Setting a maximum synchronous negotiation rate
|
||||
of 8MHz in the
|
||||
.Tn SCSI-Select
|
||||
utility
|
||||
will allow normal function.
|
||||
will allow normal operation.
|
||||
.Sh SEE ALSO
|
||||
.Xr aha 4 ,
|
||||
.Xr ahb 4 ,
|
||||
.Xr cd 4 ,
|
||||
.Xr scsi 4 ,
|
||||
.Xr sd 4 ,
|
||||
.Xr st 4
|
||||
.Xr da 4 ,
|
||||
.Xr sa 4
|
||||
.Sh AUTHORS
|
||||
The
|
||||
.Nm
|
||||
driver was written by
|
||||
.An Justin Gibbs .
|
||||
The
|
||||
driver, the
|
||||
.Tn AIC7xxx
|
||||
sequencer-code assembler was
|
||||
written by
|
||||
.An John Aycock .
|
||||
sequencer-code assember,
|
||||
and the firmware running on the aic7xxx chips was written by
|
||||
.An Justin T. Gibbs .
|
||||
.Sh HISTORY
|
||||
The
|
||||
.Nm
|
||||
driver appeared in
|
||||
.Fx 2.1 .
|
||||
.Fx 2.0 .
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
.\"
|
||||
.\" Copyright (c) 1995, 1996, 1997
|
||||
.\" Copyright (c) 1995, 1996, 1997, 1998
|
||||
.\" Justin T. Gibbs. All rights reserved.
|
||||
.\"
|
||||
.\" Redistribution and use in source and binary forms, with or without
|
||||
@ -24,9 +24,9 @@
|
||||
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
.\"
|
||||
.\" $Id: ahc.4,v 1.11 1998/06/08 06:11:58 jkoshy Exp $
|
||||
.\" $Id: ahc.4,v 1.12 1998/06/13 19:06:49 steve Exp $
|
||||
.\"
|
||||
.Dd April 20, 1996
|
||||
.Dd October 15, 1998
|
||||
.Dt AHC 4 i386
|
||||
.Os FreeBSD
|
||||
.Sh NAME
|
||||
@ -41,12 +41,6 @@ For one or more PCI cards:
|
||||
.Cd controller pci0
|
||||
.Cd controller ahc0
|
||||
.Pp
|
||||
To enable SCB paging:
|
||||
.Cd options AHC_SCBPAGING_ENABLE
|
||||
.Pp
|
||||
To enable tagged queueing:
|
||||
.Cd options AHC_TAGENABLE
|
||||
.Pp
|
||||
To allow PCI adapters to use memory mapped I/O if enabled:
|
||||
.Cd options AHC_ALLOW_MEMIO
|
||||
.Pp
|
||||
@ -55,59 +49,49 @@ For one or more SCSI busses:
|
||||
.Sh DESCRIPTION
|
||||
This driver provides access to the
|
||||
.Tn SCSI
|
||||
bus(es) connected to Adaptec
|
||||
274x, 284x, 2940, 3940, or controllers based on the
|
||||
bus(es) connected to Adaptec
|
||||
.Tn AIC7770,
|
||||
.Tn AIC7850,
|
||||
.Tn AIC7860,
|
||||
.Tn AIC7870,
|
||||
.Tn AIC7880,
|
||||
.Tn AIC7890,
|
||||
.Tn AIC7891,
|
||||
.Tn AIC7895,
|
||||
.Tn AIC7896,
|
||||
or
|
||||
.Tn AIC7880
|
||||
.Tn AIC7897
|
||||
host adapter chips.
|
||||
Features include support for twin and wide busses,
|
||||
ultra
|
||||
.Tn SCSI,
|
||||
two active commands at a time per non-tagged queueing target,
|
||||
tagged queuing,
|
||||
These chips are found on many motherboards as well as the following
|
||||
Adaptec SCSI controller cards:
|
||||
.Tn 274X(W),
|
||||
.Tn 274X(T),
|
||||
.Tn 284X,
|
||||
.Tn 2920C,
|
||||
.Tn 2940,
|
||||
.Tn 2940U,
|
||||
.Tn 2940AU,
|
||||
.Tn 2940UW,
|
||||
.Tn 2940UW Dual,
|
||||
.Tn 2940U2W,
|
||||
.Tn 2940U2B,
|
||||
.Tn 2950U2W,
|
||||
.Tn 2950U2B,
|
||||
.Tn 3940,
|
||||
.Tn 3940U,
|
||||
.Tn 3940AU,
|
||||
.Tn 3940UW,
|
||||
.Tn 3940AUW,
|
||||
.Tn 3940U2W,
|
||||
and
|
||||
.Tn 3985.
|
||||
.Pp
|
||||
Driver features include support for twin and wide busses,
|
||||
fast, ultra and ultra2 synchronous transfers depending on controller type,
|
||||
tagged queueing,
|
||||
and SCB paging.
|
||||
.Pp
|
||||
The number of concurrent transactions allowed is chip dependent
|
||||
and ranges from 3 to 16.
|
||||
On PCI adapters,
|
||||
this number can be increased with the SCB paging option.
|
||||
SCB paging implements an algorithm to 'page-out' transactions
|
||||
that are in the disconnected state so that the freed space in
|
||||
the controller's memory can be used to start additional transactions.
|
||||
On the aic7880 and aic7870,
|
||||
this increases the maximum number of outstanding transactions from 16 to 255.
|
||||
On the aic7850 and aic7860 controllers, this maximum rises from 3 to 8.
|
||||
During the hardware probe,
|
||||
a diagnostic showing the ratio of hardware supported 'slots' to number
|
||||
of transactions is printed.
|
||||
SCB paging is enabled with the
|
||||
.Dq Dv AHC_SCBPAGING_ENABLE
|
||||
configuration option.
|
||||
This option will likely be removed and become the default behavior for
|
||||
adapters that support it,
|
||||
in the near future.
|
||||
.Pp
|
||||
Tagged queueing is enabled with the
|
||||
.Dq Dv AHC_TAGENABLE
|
||||
configuration option.
|
||||
Tagged queueing allows multiple transactions to be queued at the device
|
||||
level instead of the host level,
|
||||
allowing the device to re-order I/O to minimize seeks,
|
||||
seek distance,
|
||||
and to increase throughput.
|
||||
Tagged queueing can have a significant impact on performance for seek
|
||||
bound applications and should be enabled for most configurations.
|
||||
Unfortunately, some devices that claim to support tagged queueing fail
|
||||
miserably when it is used.
|
||||
The only reason tagged queueing remains as a controller option is as a
|
||||
stop gap measure until a mechanism to detect these broken devices and to
|
||||
control this feature on a per device basis is in place.
|
||||
.Pp
|
||||
Memory mapped I/O can be enabled with the
|
||||
Memory mapped I/O can be enabled for PCI devices with the
|
||||
.Dq Dv AHC_ALLOW_MEMIO
|
||||
configuration option.
|
||||
Memory mapped I/O is more efficient than the alternative, programmed I/O.
|
||||
@ -139,7 +123,12 @@ must be enabled for
|
||||
adaptors. This includes synchronous/asynchronous transfers,
|
||||
maximum synchronous negotiation rate,
|
||||
disconnection,
|
||||
and the host adapter's SCSI ID.
|
||||
the host adapter's SCSI ID,
|
||||
and,
|
||||
in the case of
|
||||
.Tn EISA
|
||||
Twin Channel controllers,
|
||||
the primary channel selection.
|
||||
.Pp
|
||||
Note that I/O addresses are determined automatically by the probe routines,
|
||||
but care should be taken when using a 284x
|
||||
@ -151,35 +140,110 @@ system. Ensure that the jumpers setting the I/O area for the 284x match the
|
||||
slot into which the card is inserted to prevent conflicts with other
|
||||
.Tn EISA
|
||||
cards.
|
||||
.Pp
|
||||
Performance and feature sets vary throughout the aic7xxx product line.
|
||||
The following table provides a comparison of the different chips supported
|
||||
by the
|
||||
.Nm
|
||||
driver. Note that wide and twin channel features, although always supported
|
||||
by a particular chip, may be disabled in a particular motherboard or card
|
||||
design.
|
||||
.Pp
|
||||
.Bd -filled -offset indent
|
||||
.Bl -column "aic7770 " "10 " "EISA/VL " "10MHz " "16bit " "SCBs " Features
|
||||
.Em "Chip MIPS Bus MaxSync MaxWidth SCBs Features"
|
||||
aic7770 10 EISA/VL 10MHz 16Bit 4 1
|
||||
aic7850 10 PCI/32 10MHz 8Bit 3
|
||||
aic7860 10 PCI/32 20MHz 8Bit 3
|
||||
aic7870 10 PCI/32 10MHz 16Bit 16
|
||||
aic7880 10 PCI/32 20MHz 16Bit 16
|
||||
aic7890 20 PCI/32 40MHz 16Bit 16 3 4 5 6 7
|
||||
aic7891 20 PCI/64 40MHz 16Bit 16 3 4 5 6 7
|
||||
aic7895 15 PCI/32 20MHz 16Bit 16 2 3 4 5
|
||||
aic7896 20 PCI/32 40MHz 16Bit 16 2 3 4 5 6 7
|
||||
aic7897 20 PCI/64 40MHz 16Bit 16 2 3 4 5 6 7
|
||||
.El
|
||||
.Pp
|
||||
.Bl -enum -compact
|
||||
.It
|
||||
Multiplexed Twin Channel Device - One controller servicing two busses.
|
||||
.It
|
||||
Multi-function Twin Channel Device - Two controllers on one chip.
|
||||
.It
|
||||
Command Channel Secondary DMA Engine - Allows scatter gather list and
|
||||
SCB prefetch.
|
||||
.It
|
||||
64 Byte SCB Support - SCSI CDB is embedded in the SCB to eliminate an extra DMA.
|
||||
.It
|
||||
Block Move Instruction Support - Doubles the speed of certain sequencer
|
||||
operations.
|
||||
.It
|
||||
.Sq Bayonet
|
||||
style Scatter Gather Engine - Improves S/G prefetch performance.
|
||||
.It
|
||||
Queueing Registers - Allows queueing of new transactions without pausing the
|
||||
sequencer.
|
||||
.El
|
||||
.Ed
|
||||
.Pp
|
||||
|
||||
.Sh SCSI CONTROL BLOCKS (SCBs)
|
||||
Every transaction sent to a device on the SCSI bus is assigned a
|
||||
.Sq SCSI Control Block
|
||||
(SCB). The SCB contains all of the information required by the
|
||||
controller to process a transaction. The chip feature table lists
|
||||
the number of SCBs that can be stored in on chip memory. All chips
|
||||
with model numbers greater than or equal to 7870 allow for the on chip
|
||||
SCB space to be augmented with external SRAM up to a maximum of 255 SCBs.
|
||||
Very few Adaptec controller have external SRAM.
|
||||
|
||||
If external SRAM is not available, SCBs are a limited resource and
|
||||
using them in a straight forward manner would only allow us to
|
||||
keep as many transactions as there are SCBs outstanding at a time.
|
||||
This would not allow enough concurrency to fully utilize the SCSI
|
||||
bus and it's devices. The solution to this problem is
|
||||
.Em SCB Paging ,
|
||||
a concept similar to memory paging. SCB paging takes advantage of
|
||||
the fact that devices usually disconnect from the SCSI bus for long
|
||||
periods of time without talking to the controller. The SCBs
|
||||
for disconnected transactions are only of use to the controller
|
||||
when the transfer is resumed. When the host queues another transaction
|
||||
for the controller to execute, the controller firmware will use a
|
||||
free SCB if one is available. Otherwise, the state of the most recently
|
||||
disconnected (and therefor most likely to stay disconnected) SCB is
|
||||
saved, via dma, to host memory, and the local SCB reused to start
|
||||
the new transaction. This allows the controller to queue up to
|
||||
255 transactions regardless of the amount of SCB space. Since the
|
||||
local SCB space serves as a cache for disconnected transactions, the
|
||||
more SCB space available, the less host bus traffic consumed saving
|
||||
and restoring SCB data.
|
||||
.Sh BUGS
|
||||
Some Quantum drives (at least the Empire 2100 and 1080s) will not run on an
|
||||
.Tn AIC7870
|
||||
Rev B in synchronous mode at 10MHz. Controllers with this problem have a
|
||||
42 MHz clock crystal on them and run slightly above 10MHz. This causes the
|
||||
drive much confusion. Setting a maximum synchronous negotiation rate of 8MHz
|
||||
in the
|
||||
42 MHz clock crystal on them and run slightly above 10MHz. This confuses
|
||||
the drive and hangs the bus. Setting a maximum synchronous negotiation rate
|
||||
of 8MHz in the
|
||||
.Tn SCSI-Select
|
||||
utility
|
||||
will allow normal function.
|
||||
will allow normal operation.
|
||||
.Sh SEE ALSO
|
||||
.Xr aha 4 ,
|
||||
.Xr ahb 4 ,
|
||||
.Xr cd 4 ,
|
||||
.Xr scsi 4 ,
|
||||
.Xr sd 4 ,
|
||||
.Xr st 4
|
||||
.Xr da 4 ,
|
||||
.Xr sa 4
|
||||
.Sh AUTHORS
|
||||
The
|
||||
.Nm
|
||||
driver was written by
|
||||
.An Justin Gibbs .
|
||||
The
|
||||
driver, the
|
||||
.Tn AIC7xxx
|
||||
sequencer-code assembler was
|
||||
written by
|
||||
.An John Aycock .
|
||||
sequencer-code assember,
|
||||
and the firmware running on the aic7xxx chips was written by
|
||||
.An Justin T. Gibbs .
|
||||
.Sh HISTORY
|
||||
The
|
||||
.Nm
|
||||
driver appeared in
|
||||
.Fx 2.1 .
|
||||
.Fx 2.0 .
|
||||
|
||||
Loading…
Reference in New Issue
Block a user