Remove most of the CPU: sections, and reflect SMP capability of
FreeBSD/alpha.
This commit is contained in:
parent
855aa097af
commit
0fff015e49
@ -1242,10 +1242,6 @@ Starting with SRM firmware version 5.9 you can boot from Adaptec 2940-series
|
||||
adapters in addition to the usual set of Qlogic and Symbios/NCR adapters.
|
||||
This unfortunately does not include the embedded Adaptec SCSI chips.
|
||||
|
||||
CPU:
|
||||
DS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
|
||||
and will only use the primary CPU.
|
||||
|
||||
Memory:
|
||||
If you are using banks of DIMMs of different sizes the biggest DIMMs should
|
||||
be installed in the DIMM slots marked '0' on the mainboard. The DIMM slots
|
||||
@ -1288,10 +1284,6 @@ Features:
|
||||
Memory:
|
||||
A maximum of 2Gb memory is supported by FreeBSD.
|
||||
|
||||
CPU:
|
||||
DP264 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
|
||||
and will only use the primary CPU.
|
||||
|
||||
Embedded SCSI:
|
||||
The on-board Adaptec is not bootable but works with FreeBSD 4.0 and later
|
||||
as a datadisk-only SCSI bus.
|
||||
@ -1338,8 +1330,6 @@ CPU:
|
||||
The CPUs spec-ed as 200 MHz are in reality running at 190 MHz. Maximum
|
||||
number of CPUs is 4. All CPUs must be of the same type/speed.
|
||||
|
||||
Currently FreeBSD only uses one CPU in a multiprocessor machine.
|
||||
|
||||
If any of the processors are ever marked as failed, they will
|
||||
remain marked as failed even after they have been replaced (or reseated)
|
||||
until you issue the command 'clear_error all' on the SRM console and
|
||||
@ -1460,9 +1450,6 @@ Features:
|
||||
- 1 parallel port
|
||||
- PS/2 style keyboard & mouse port
|
||||
|
||||
CPU:
|
||||
Rawhide is a multiprocessor machine. Currently FreeBSD only uses one CPU.
|
||||
|
||||
Memory:
|
||||
Rawhide uses a maximum of 8 RAM modules. These modules are used in pairs
|
||||
and supply 72 bits to the bus (this includes ECC bits). Memory can be EDO
|
||||
@ -1522,9 +1509,6 @@ Features:
|
||||
- 1 parallel port
|
||||
- PS/2 style keyboard & mouse port
|
||||
|
||||
CPU:
|
||||
AS1200 is a multiprocessor-capable machine. Currently FreeBSD only uses one CPU.
|
||||
|
||||
Memory:
|
||||
AS1200 uses 2 memory daughter cards. On each of these cards are 8 DIMM slots.
|
||||
DIMMs must be installed in pairs. The maximum memory size is 4 Gbytes.
|
||||
@ -1590,10 +1574,6 @@ Memory:
|
||||
FreeBSD supports (and has been tested with) up to 2 Gbytes of memory on
|
||||
TurboLaser.
|
||||
|
||||
CPU:
|
||||
TurboLaser is very much a multiprocessor machine. Currently FreeBSD only
|
||||
uses one CPU.
|
||||
|
||||
Expansion:
|
||||
Only PCI expansion is supported on FreeBSD. XMI or Futurebus+ (which
|
||||
are AS8400 only) are both unsupported.
|
||||
@ -1797,10 +1777,6 @@ Features:
|
||||
- embedded Symbios 53C1000 Ultra160 SCSI controller
|
||||
- expansion: 2 64 bit PCI slots (2/3 length)
|
||||
|
||||
CPU:
|
||||
The CS20 can have 2 CPUs installed. FreeBSD/alpha is not currently SMP-capable
|
||||
and will only use the primary CPU.
|
||||
|
||||
Console:
|
||||
SRM console code comes standard with the CS20. The SRM lives in 2Mbytes of
|
||||
flash ROM.
|
||||
|
Loading…
x
Reference in New Issue
Block a user