d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add support for more chips to the gpioths driver.

Browse Source 
Previously the driver supported the DHT11 sensor.  Now it supports

 DHT11, DHT12, DHT21, DHT22, AM3201, AM3202.

All these chips are similar, differing primarily in supported temperature
and humidity ranges and accuracy (and, presumably, cost).  There are two
basic data formats reported by the various chips, and it is possible to
figure out at runtime which format to use for decoding the data based on
the range of values in a single byte of the humidity measurement. (which
is detailed in a comment block, so I won't recapitulate it here).
This commit is contained in:
ian 2019-12-08 20:42:58 +00:00
parent efadb68342
commit 10abe841d1
1 changed files with 49 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
sys/dev/gpio/gpioths.c
View File

@ -47,6 +47,14 @@ __FBSDID("$FreeBSD$");
* This is driver for Temperature & Humidity sensor which provides digital
* output over single-wire protocol from embedded 8-bit microcontroller.
*
* This driver supports the following chips:
* DHT11: Temp 0c to 50c +-2.0c, Humidity 20% to 90% +-5%
* DHT12: Temp -20c to 60c +-0.5c, Humidity 20% to 95% +-5%
* DHT21: Temp -40c to 80c +-0.3c, Humidity 0% to 100% +-3%
* DHT22: Temp -40c to 80c +-0.3c, Humidity 0% to 100% +-2%
* AM2301: Same as DHT21, but also supports i2c interface.
* AM2302: Same as DHT22, but also supports i2c interface.
*
* Temp/Humidity sensor can't be discovered automatically, please specify hints
* as part of loader or kernel configuration:
* hint.gpioths.0.at="gpiobus0"
@ -59,8 +67,6 @@ __FBSDID("$FreeBSD$");
#define GPIOTHS_DHT_TIMEOUT 1000 /* 1ms = 1000us */
#define GPIOTHS_DHT_CYCLES 41
#define GPIOTHS_DHT_ONEBYTEMASK 0xFF
#define GPIOTHS_DHT_TEMP_SHIFT 8
#define GPIOTHS_DHT_HUM_SHIFT 24
struct gpioths_softc {
device_t dev;
@ -160,7 +166,7 @@ gpioths_dht_readbytes(device_t bus, device_t dev)
uint32_t intervals[GPIOTHS_DHT_CYCLES];
uint32_t err, avglen, value;
uint8_t crc, calc;
int i, offset, size;
int i, negmul, offset, size, tmphi, tmplo;
sc = device_get_softc(dev);
@ -246,9 +252,46 @@ gpioths_dht_readbytes(device_t bus, device_t dev)
goto error;
}
/*
* For DHT11/12, the values are split into 8 bits of integer and 8 bits
* of fractional tenths. On DHT11 the fraction bytes are always zero.
* On DHT12 the sign bit is in the high bit of the fraction byte.
* - DHT11: 0HHHHHHH 00000000 00TTTTTT 00000000
* - DHT12: 0HHHHHHH 0000hhhh 00TTTTTT s000tttt
*
* For DHT21/21, the values are are encoded in 16 bits each, with the
* temperature sign bit in the high bit. The values are tenths of a
* degree C and tenths of a percent RH.
* - DHT21: 000000HH HHHHHHHH s00000TT TTTTTTTT
* - DHT22: 000000HH HHHHHHHH s00000TT TTTTTTTT
*
* For all devices, some bits are always zero because of the range of
* values supported by the device.
*
* We figure out how to decode things based on the high byte of the
* humidity. A DHT21/22 cannot report a value greater than 3 in
* the upper bits of its 16-bit humidity. A DHT11/12 should not report
* a value lower than 20. To allow for the possibility that a device
* could report a value slightly out of its sensitivity range, we split
* the difference and say if the value is greater than 10 it cannot be a
* DHT22 (that would be a humidity over 256%).
*/
#define DK_OFFSET 2731 /* Offset between K and C, in decikelvins. */
if ((value >> 24) > 10) {
/* DHT11 or DHT12 */
tmphi = (value >> 8) & 0x3f;
tmplo = value & 0x0f;
negmul = (value & 0x80) ? -1 : 1;
sc->temp = DK_OFFSET + (negmul * (tmphi * 10 + tmplo));
sc->hum = (value >> 24) & 0x7f;
} else {
/* DHT21 or DHT22 */
negmul = (value & 0x8000) ? -1 : 1;
sc->temp = DK_OFFSET + (negmul * (value & 0x03ff));
sc->hum = ((value >> 16) & 0x03ff) / 10;
}
sc->fails = 0;
sc->temp = (value >> GPIOTHS_DHT_TEMP_SHIFT) & GPIOTHS_DHT_ONEBYTEMASK;
sc->hum = (value >> GPIOTHS_DHT_HUM_SHIFT) & GPIOTHS_DHT_ONEBYTEMASK;
#ifdef GPIOTHS_DEBUG
/* Debug bits */
@ -296,7 +339,7 @@ gpioths_attach(device_t dev)
sysctl_add_oid(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "temperature", \
CTLFLAG_RD | CTLTYPE_INT | CTLFLAG_MPSAFE,
&sc->temp, 0, sysctl_handle_int, "I", "temperature", NULL);
&sc->temp, 0, sysctl_handle_int, "IK", "temperature", NULL);
SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "humidity",
CTLFLAG_RD, &sc->hum, 0, "relative humidity(%)");