d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Another round of changes to add compatibility with the older ESHDC variety

Browse Source 
of hardware.  Mostly this focuses on the big changes needed for setting the
bus clock, because ESDHC is SDHCI v2.0 and USDHC is 3.0, and the number,
location, and interpretation of clock divisor bits is vastly different
between the two.  This doesn't get the device all the way to functioning
on ESDHC hardware yet, but it's much closer, now getting through all the
card detection and negotiation of capabilties and speed (but it eventually
hangs on what appears to be a missing interrupt).

Another missing chunk of code for handling ESDHC's 32 bit command-and-mode
register using sdhci's pair of 16 bit writes is added.

This also does some leading whitespace cleanups and sorts some softc
struct members by size, and adds some comments (because when do I ever
touch code without adding comments?).
This commit is contained in:
Ian Lepore 2016-05-26 03:55:27 +00:00
parent 2b0bce640b
commit 183d468536
1 changed files with 160 additions and 82 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

242
sys/arm/freescale/imx/imx_sdhci.c
View File

@ -39,6 +39,7 @@ __FBSDID("$FreeBSD$");
#include <sys/bus.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/libkern.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
@ -74,12 +75,12 @@ struct imx_sdhci_softc {
struct callout r1bfix_callout;
sbintime_t r1bfix_timeout_at;
uint32_t baseclk_hz;
uint32_t sdclockreg_freq_bits;
uint32_t cmd_and_mode;
uint32_t r1bfix_intmask;
boolean_t force_card_present;
uint16_t sdclockreg_freq_bits;
uint8_t r1bfix_type;
uint8_t hwtype;
boolean_t force_card_present;
};
#define R1BFIX_NONE 0 /* No fix needed at next interrupt. */
@ -90,6 +91,12 @@ struct imx_sdhci_softc {
#define HWTYPE_ESDHC 1 /* imx5x and earlier. */
#define HWTYPE_USDHC 2 /* imx6. */
/*
* Freescale-specific registers, or in some cases the layout of bits within the
* sdhci-defined register is different on Freescale. These names all begin with
* SDHC_ (not SDHCI_).
*/
#define SDHC_WTMK_LVL 0x44 /* Watermark Level register. */
#define USDHC_MIX_CONTROL 0x48 /* Mix(ed) Control register. */
#define SDHC_VEND_SPEC 0xC0 /* Vendor-specific register. */
@ -138,11 +145,20 @@ struct imx_sdhci_softc {
#define SDHC_PROT_CDTL (1 << 6)
#define SDHC_PROT_CDSS (1 << 7)
#define SDHC_SYS_CTRL 0x2c
#define SDHC_INT_STATUS 0x30
/*
* The clock enable bits exist in different registers for ESDHC vs USDHC, but
* they are the same bits in both cases. The divisor values go into the
* standard sdhci clock register, but in different bit positions and meanings
than the sdhci spec values.
*/
#define SDHC_CLK_IPGEN (1 << 0)
#define SDHC_CLK_HCKEN (1 << 1)
#define SDHC_CLK_PEREN (1 << 2)
#define SDHC_CLK_SDCLKEN (1 << 3)
#define SDHC_CLK_ENABLE_MASK 0x0000000f
#define SDHC_CLK_DIVISOR_MASK 0x000000f0
#define SDHC_CLK_DIVISOR_SHIFT 4
#define SDHC_CLK_PRESCALE_MASK 0x0000ff00
@ -156,7 +172,8 @@ static struct ofw_compat_data compat_data[] = {
{NULL, HWTYPE_NONE},
};
static void imx_sdhc_set_clock(struct imx_sdhci_softc *sc, int enable);
static uint16_t imx_sdhc_get_clock(struct imx_sdhci_softc *sc);
static void imx_sdhc_set_clock(struct imx_sdhci_softc *sc, uint16_t val);
static void imx_sdhci_r1bfix_func(void *arg);
static inline uint32_t
@ -186,7 +203,7 @@ imx_sdhci_read_1(device_t dev, struct sdhci_slot *slot, bus_size_t off)
*/
if (off == SDHCI_HOST_CONTROL) {
wrk32 = RD4(sc, SDHC_PROT_CTRL);
val32 = wrk32 & (SDHCI_CTRL_LED | SDHCI_CTRL_CARD_DET |
val32 = wrk32 & (SDHCI_CTRL_LED | SDHCI_CTRL_CARD_DET |
SDHCI_CTRL_FORCE_CARD);
switch (wrk32 & SDHC_PROT_WIDTH_MASK) {
case SDHC_PROT_WIDTH_1BIT:
@ -204,7 +221,7 @@ imx_sdhci_read_1(device_t dev, struct sdhci_slot *slot, bus_size_t off)
/* Value is already 0. */
break;
case SDHC_PROT_ADMA1:
/* This value is deprecated, should never appear. */
/* This value is deprecated, should never appear. */
break;
case SDHC_PROT_ADMA2:
val32 |= SDHCI_CTRL_ADMA2;
@ -221,7 +238,7 @@ imx_sdhci_read_1(device_t dev, struct sdhci_slot *slot, bus_size_t off)
* power is always on and always set to the same voltage.
*/
if (off == SDHCI_POWER_CONTROL) {
return (SDHCI_POWER_ON | SDHCI_POWER_300);
return (SDHCI_POWER_ON | SDHCI_POWER_300);
}
@ -232,7 +249,7 @@ static uint16_t
imx_sdhci_read_2(device_t dev, struct sdhci_slot *slot, bus_size_t off)
{
struct imx_sdhci_softc *sc = device_get_softc(dev);
uint32_t val32, wrk32;
uint32_t val32;
if (sc->hwtype == HWTYPE_USDHC) {
/*
@ -258,9 +275,9 @@ imx_sdhci_read_2(device_t dev, struct sdhci_slot *slot, bus_size_t off)
* cached values last written.
*/
if (off == SDHCI_TRANSFER_MODE) {
return (sc->cmd_and_mode >> 16);
} else if (off == SDHCI_COMMAND_FLAGS) {
return (sc->cmd_and_mode & 0x0000ffff);
} else if (off == SDHCI_COMMAND_FLAGS) {
return (sc->cmd_and_mode >> 16);
}
}
@ -276,22 +293,11 @@ imx_sdhci_read_2(device_t dev, struct sdhci_slot *slot, bus_size_t off)
}
/*
* The clock enable bit is in the vendor register and the clock-stable
* bit is in the present state register. Transcribe them as if they
* were in the clock control register where they should be.
* XXX Is it important that we distinguish between "internal" and "card"
* clocks? Probably not; transcribe the card clock status to both bits.
* Clock bits are scattered into various registers which differ by
* hardware type, complex enough to have their own function.
*/
if (off == SDHCI_CLOCK_CONTROL) {
val32 = 0;
wrk32 = RD4(sc, SDHC_VEND_SPEC);
if (wrk32 & SDHC_VEND_FRC_SDCLK_ON)
val32 |= SDHCI_CLOCK_INT_EN | SDHCI_CLOCK_CARD_EN;
wrk32 = RD4(sc, SDHC_PRES_STATE);
if (wrk32 & SDHC_PRES_SDSTB)
val32 |= SDHCI_CLOCK_INT_STABLE;
val32 |= sc->sdclockreg_freq_bits;
return (val32);
return (imx_sdhc_get_clock(sc));
}
return ((RD4(sc, off & ~3) >> (off & 3) * 8) & 0xffff);
@ -307,9 +313,11 @@ imx_sdhci_read_4(device_t dev, struct sdhci_slot *slot, bus_size_t off)
/*
* The hardware leaves the base clock frequency out of the capabilities
* register; fill it in. The timeout clock is the same as the active
* output sdclock; we indicate that with a quirk setting so don't
* populate the timeout frequency bits.
* register, but we filled it in by setting slot->max_clk at attach time
* rather than here, because we can't represent frequencies above 63MHz
* in an sdhci 2.0 capabliities register. The timeout clock is the same
* as the active output sdclock; we indicate that with a quirk setting
* so don't populate the timeout frequency bits.
*
* XXX Turn off (for now) features the hardware can do but this driver
* doesn't yet handle (1.8v, suspend/resume, etc).
@ -318,7 +326,6 @@ imx_sdhci_read_4(device_t dev, struct sdhci_slot *slot, bus_size_t off)
val32 &= ~SDHCI_CAN_VDD_180;
val32 &= ~SDHCI_CAN_DO_SUSPEND;
val32 |= SDHCI_CAN_DO_8BITBUS;
val32 |= (sc->baseclk_hz / 1000000) << SDHCI_CLOCK_BASE_SHIFT;
return (val32);
}
@ -326,7 +333,7 @@ imx_sdhci_read_4(device_t dev, struct sdhci_slot *slot, bus_size_t off)
* The hardware moves bits around in the present state register to make
* room for all 8 data line state bits. To translate, mask out all the
* bits which are not in the same position in both registers (this also
* masks out some freescale-specific bits in locations defined as
* masks out some Freescale-specific bits in locations defined as
* reserved by sdhci), then shift the data line and retune request bits
* down to their standard locations.
*/
@ -404,31 +411,12 @@ imx_sdhci_write_2(device_t dev, struct sdhci_slot *slot, bus_size_t off, uint16_
struct imx_sdhci_softc *sc = device_get_softc(dev);
uint32_t val32;
/* The USDHC hardware moved the transfer mode bits to mixed control. */
if (sc->hwtype == HWTYPE_USDHC) {
if (off == SDHCI_TRANSFER_MODE) {
val32 = RD4(sc, USDHC_MIX_CONTROL);
val32 &= ~0x3f;
val32 |= val & 0x37;
// XXX acmd23 not supported here (or by sdhci driver)
WR4(sc, USDHC_MIX_CONTROL, val32);
return;
}
}
/*
* The clock control stuff is complex enough to have its own routine
* that can both change speeds and en/disable the clock output. Also,
* save the register bits in SDHCI format so that we can play them back
* in the read2 routine without complex decoding.
* The clock control stuff is complex enough to have its own function
* that can handle the ESDHC versus USDHC differences.
*/
if (off == SDHCI_CLOCK_CONTROL) {
sc->sdclockreg_freq_bits = val & 0xffc0;
if (val & SDHCI_CLOCK_CARD_EN) {
imx_sdhc_set_clock(sc, true);
} else {
imx_sdhc_set_clock(sc, false);
}
imx_sdhc_set_clock(sc, val);
return;
}
@ -461,6 +449,35 @@ imx_sdhci_write_2(device_t dev, struct sdhci_slot *slot, bus_size_t off, uint16_
}
}
/*
* The USDHC hardware moved the transfer mode bits to mixed control; we
* just write them there and we're done. The ESDHC hardware has the
* typical combined cmd-and-mode register that allows only 32-bit
* access, so when writing the mode bits just save them, then later when
* writing the command bits, add in the saved mode bits.
*/
if (sc->hwtype == HWTYPE_USDHC) {
if (off == SDHCI_TRANSFER_MODE) {
val32 = RD4(sc, USDHC_MIX_CONTROL);
val32 &= ~0x3f;
val32 |= val & 0x37;
// XXX acmd23 not supported here (or by sdhci driver)
WR4(sc, USDHC_MIX_CONTROL, val32);
return;
}
} else if (sc->hwtype == HWTYPE_ESDHC) {
if (off == SDHCI_TRANSFER_MODE) {
sc->cmd_and_mode =
(sc->cmd_and_mode & 0xffff0000) | val;
return;
} else if (off == SDHCI_COMMAND_FLAGS) {
sc->cmd_and_mode =
(sc->cmd_and_mode & 0xffff) | (val << 16);
WR4(sc, SDHCI_TRANSFER_MODE, sc->cmd_and_mode);
return;
}
}
val32 = RD4(sc, off & ~3);
val32 &= ~(0xffff << (off & 3) * 8);
val32 |= ((val & 0xffff) << (off & 3) * 8);
@ -489,40 +506,103 @@ imx_sdhci_write_multi_4(device_t dev, struct sdhci_slot *slot, bus_size_t off,
bus_write_multi_4(sc->mem_res, off, data, count);
}
static void
imx_sdhc_set_clock(struct imx_sdhci_softc *sc, int enable)
static uint16_t
imx_sdhc_get_clock(struct imx_sdhci_softc *sc)
{
uint32_t divisor, enable_bits, enable_reg, freq, prescale, val32;
uint16_t val;
/*
* Whenever the sdhci driver writes the clock register we save a
* snapshot of just the frequency bits, so that we can play them back
* here on a register read without recalculating the frequency from the
* prescalar and divisor bits in the real register. We'll start with
* those bits, and mix in the clock status and enable bits that come
* from different places depending on which hardware we've got.
*/
val = sc->sdclockreg_freq_bits;
/*
* The internal clock is always enabled (actually, the hardware manages
* it). Whether the internal clock is stable yet after a frequency
* change comes from the present-state register on both hardware types.
*/
val |= SDHCI_CLOCK_INT_EN;
if (RD4(sc, SDHC_PRES_STATE) & SDHC_PRES_SDSTB)
val |= SDHCI_CLOCK_INT_STABLE;
/*
* On ESDHC hardware the card bus clock enable is in the usual sdhci
* register but it's a different bit, so transcribe it (note the
* difference between standard SDHCI_ and Freescale SDHC_ prefixes
* here). On USDHC hardware there is a force-on bit, but no force-off
* for the card bus clock (the hardware runs the clock when transfers
* are active no matter what), so we always say the clock is on.
* XXX Maybe we should say it's in whatever state the sdhci driver last
* set it to.
*/
if (sc->hwtype == HWTYPE_ESDHC) {
divisor = (sc->sdclockreg_freq_bits >> SDHCI_DIVIDER_SHIFT) &
SDHCI_DIVIDER_MASK;
enable_reg = SDHCI_CLOCK_CONTROL;
enable_bits = SDHC_CLK_IPGEN | SDHC_CLK_HCKEN |
SDHC_CLK_PEREN;
if (RD4(sc, SDHC_SYS_CTRL) & SDHC_CLK_SDCLKEN)
val |= SDHCI_CLOCK_CARD_EN;
} else {
divisor = (sc->sdclockreg_freq_bits >> SDHCI_DIVIDER_SHIFT) &
SDHCI_DIVIDER_MASK;
divisor |= ((sc->sdclockreg_freq_bits >>
SDHCI_DIVIDER_HI_SHIFT) &
SDHCI_DIVIDER_HI_MASK) << SDHCI_DIVIDER_MASK_LEN;
enable_reg = SDHCI_CLOCK_CONTROL;
enable_bits = SDHC_VEND_IPGEN | SDHC_VEND_HCKEN |
SDHC_VEND_PEREN;
val |= SDHCI_CLOCK_CARD_EN;
}
WR4(sc, SDHC_VEND_SPEC,
RD4(sc, SDHC_VEND_SPEC) & ~SDHC_VEND_FRC_SDCLK_ON);
WR4(sc, enable_reg, RD4(sc, enable_reg) & ~enable_bits);
return (val);
}
if (!enable)
return;
static void
imx_sdhc_set_clock(struct imx_sdhci_softc *sc, uint16_t val)
{
uint32_t divisor, freq, prescale, val32;
if (divisor == 0)
freq = sc->baseclk_hz;
else
freq = sc->baseclk_hz / (2 * divisor);
val32 = RD4(sc, SDHCI_CLOCK_CONTROL);
/*
* Save the frequency-setting bits in SDHCI format so that we can play
* them back in get_clock without complex decoding of hardware regs,
* then deal with the freqency part of the value based on hardware type.
*/
sc->sdclockreg_freq_bits = val & SDHCI_DIVIDERS_MASK;
if (sc->hwtype == HWTYPE_ESDHC) {
/*
* The ESDHC hardware requires the driver to manually start and
* stop the sd bus clock. If the enable bit is not set, turn
* off the clock in hardware and we're done, otherwise decode
* the requested frequency. ESDHC hardware is sdhci 2.0; the
* sdhci driver will use the original 8-bit divisor field and
* the "base / 2^N" divisor scheme.
*/
if ((val & SDHCI_CLOCK_CARD_EN) == 0) {
WR4(sc, SDHCI_CLOCK_CONTROL, val32 & ~SDHC_CLK_SDCLKEN);
return;
}
divisor = (val >> SDHCI_DIVIDER_SHIFT) & SDHCI_DIVIDER_MASK;
freq = sc->baseclk_hz >> ffs(divisor);
} else {
/*
* The USDHC hardware provides only "force always on" control
* over the sd bus clock, but no way to turn it off. (If a cmd
* or data transfer is in progress the clock is on, otherwise it
* is off.) If the clock is being disabled, we can just return
* now, otherwise we decode the requested frequency. USDHC
* hardware is sdhci 3.0; the sdhci driver will use a 10-bit
* divisor using the "base / 2*N" divisor scheme.
*/
if ((val & SDHCI_CLOCK_CARD_EN) == 0)
return;
divisor = ((val >> SDHCI_DIVIDER_SHIFT) & SDHCI_DIVIDER_MASK) |
((val >> SDHCI_DIVIDER_HI_SHIFT) & SDHCI_DIVIDER_HI_MASK) <<
SDHCI_DIVIDER_MASK_LEN;
if (divisor == 0)
freq = sc->baseclk_hz;
else
freq = sc->baseclk_hz / (2 * divisor);
}
/*
* Get a prescaler and final divisor to achieve the desired frequency.
*/
for (prescale = 2; freq < sc->baseclk_hz / (prescale * 16);)
prescale <<= 1;
@ -536,19 +616,16 @@ imx_sdhc_set_clock(struct imx_sdhci_softc *sc, int enable)
prescale, divisor);
#endif
/*
* Adjust to zero-based values, and store them to the hardware.
*/
prescale >>= 1;
divisor -= 1;
val32 = RD4(sc, SDHCI_CLOCK_CONTROL);
val32 &= ~SDHC_CLK_DIVISOR_MASK;
val32 &= ~(SDHC_CLK_DIVISOR_MASK | SDHC_CLK_PRESCALE_MASK);
val32 |= divisor << SDHC_CLK_DIVISOR_SHIFT;
val32 &= ~SDHC_CLK_PRESCALE_MASK;
val32 |= prescale << SDHC_CLK_PRESCALE_SHIFT;
WR4(sc, SDHCI_CLOCK_CONTROL, val32);
WR4(sc, enable_reg, RD4(sc, enable_reg) | enable_bits);
WR4(sc, SDHC_VEND_SPEC,
RD4(sc, SDHC_VEND_SPEC) | SDHC_VEND_FRC_SDCLK_ON);
}
static boolean_t
@ -733,6 +810,7 @@ imx_sdhci_attach(device_t dev)
WR4(sc, SDHC_WTMK_LVL, 0x08800880);
sc->baseclk_hz = imx_ccm_sdhci_hz();
sc->slot.max_clk = sc->baseclk_hz;
/*
* If the slot is flagged with the non-removable property, set our flag