Additions from libpcap 0.9.8 unbreak the build.

Pointy hat to:	mlaier
X-MFC after:	RELENG_7 buildworld

sys/net/bpf.h

@@ -546,6 +546,140 @@ struct bpf_hdr {
 #define DLT_JUNIPER_FRELAY      180
 #define DLT_JUNIPER_CHDLC       181
 
+/*
+ * Multi Link Frame Relay (FRF.16)
+ */
+#define DLT_MFR                 182
+
+/*
+ * Juniper-private data link type, as per request from
+ * Hannes Gredler <hannes@juniper.net>. 
+ * The DLT_ is used for internal communication with a
+ * voice Adapter Card (PIC)
+ */
+#define DLT_JUNIPER_VP          183
+
+/*
+ * Arinc 429 frames.
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
+ * Every frame contains a 32bit A429 label.
+ * More documentation on Arinc 429 can be found at
+ * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
+ */
+#define DLT_A429                184
+
+/*
+ * Arinc 653 Interpartition Communication messages.
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
+ * Please refer to the A653-1 standard for more information.
+ */
+#define DLT_A653_ICM            185
+
+/*
+ * USB packets, beginning with a USB setup header; requested by
+ * Paolo Abeni <paolo.abeni@email.it>.
+ */
+#define DLT_USB			186
+
+/*
+ * Bluetooth HCI UART transport layer (part H:4); requested by
+ * Paolo Abeni.
+ */
+#define DLT_BLUETOOTH_HCI_H4	187
+
+/*
+ * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
+ * <cruz_petagay@bah.com>.
+ */
+#define DLT_IEEE802_16_MAC_CPS	188
+
+/*
+ * USB packets, beginning with a Linux USB header; requested by
+ * Paolo Abeni <paolo.abeni@email.it>.
+ */
+#define DLT_USB_LINUX		189
+
+/*
+ * Controller Area Network (CAN) v. 2.0B packets.
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
+ * Used to dump CAN packets coming from a CAN Vector board.
+ * More documentation on the CAN v2.0B frames can be found at
+ * http://www.can-cia.org/downloads/?269
+ */
+#define DLT_CAN20B              190
+
+/*
+ * IEEE 802.15.4, with address fields padded, as is done by Linux
+ * drivers; requested by Juergen Schimmer.
+ */
+#define DLT_IEEE802_15_4_LINUX	191
+
+/*
+ * Per Packet Information encapsulated packets.
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
+ */
+#define DLT_PPI			192
+
+/*
+ * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
+ * requested by Charles Clancy.
+ */
+#define DLT_IEEE802_16_MAC_CPS_RADIO	193
+
+/*
+ * Juniper-private data link type, as per request from
+ * Hannes Gredler <hannes@juniper.net>. 
+ * The DLT_ is used for internal communication with a
+ * integrated service module (ISM).
+ */
+#define DLT_JUNIPER_ISM         194
+
+/*
+ * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
+ * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
+ */
+#define DLT_IEEE802_15_4	195
+
+/*
+ * Various link-layer types, with a pseudo-header, for SITA
+ * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
+ */
+#define DLT_SITA		196
+
+/*
+ * Various link-layer types, with a pseudo-header, for Endace DAG cards;
+ * encapsulates Endace ERF records.  Requested by Stephen Donnelly
+ * <stephen@endace.com>.
+ */
+#define DLT_ERF			197
+
+/*
+ * Special header prepended to Ethernet packets when capturing from a
+ * u10 Networks board.  Requested by Phil Mulholland
+ * <phil@u10networks.com>.
+ */
+#define DLT_RAIF1		198
+
+/*
+ * IPMB packet for IPMI, beginning with the I2C slave address, followed
+ * by the netFn and LUN, etc..  Requested by Chanthy Toeung
+ * <chanthy.toeung@ca.kontron.com>.
+ */
+#define DLT_IPMB		199
+
+/*
+ * Juniper-private data link type, as per request from
+ * Hannes Gredler <hannes@juniper.net>. 
+ * The DLT_ is used for capturing data on a secure tunnel interface.
+ */
+#define DLT_JUNIPER_ST          200
+
+/*
+ * Bluetooth HCI UART transport layer (part H:4), with pseudo-header
+ * that includes direction information; requested by Paolo Abeni.
+ */
+#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR	201
+
 /*
  * The instruction encodings.
  */