Add controller iicbb (generic I2C bit-banging code) and lpbb
(official Philips I2C parallel interface) Add comments for bktr port to the new I2C framework
This commit is contained in:
nsouch
parent
692a15ffe3
commit
222fe989ce
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $
|
||||
# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -1491,6 +1491,12 @@ device vx0
|
||||
device xl0
|
||||
device fpa0
|
||||
device meteor0
|
||||
|
||||
# Brooktree driver has been ported to the new I2C framework. Thus,
|
||||
# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you
|
||||
# want to control other I2C slaves connected to the external connector of
|
||||
# some cards.
|
||||
#
|
||||
device bktr0
|
||||
|
||||
#
|
||||
@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# smb standard io
|
||||
#
|
||||
# Supported interfaces:
|
||||
# iicsmb I2C to SMB bridge
|
||||
# iicsmb I2C to SMB bridge with any iicbus interface
|
||||
# bktr brooktree848 I2C hardware interface
|
||||
#
|
||||
controller smbus0
|
||||
|
||||
@ -1549,8 +1556,13 @@ device smb0 at smbus?
|
||||
#
|
||||
# Supported interfaces:
|
||||
# pcf Philips PCF8584 ISA-bus controller
|
||||
# bktr brooktree848 I2C software interface
|
||||
#
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5
|
||||
# plip Parallel network interface
|
||||
# ppi General-purpose I/O ("Geek Port")
|
||||
# pps Pulse per second Timing Interface
|
||||
# lpbb Philips official parallel port I2C bit-banging interface
|
||||
#
|
||||
# Supported interfaces:
|
||||
# ppc ISA-bus parallel port interfaces.
|
||||
@ -1584,6 +1597,7 @@ device nlpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
device pps0 at ppbus?
|
||||
device lpbb0 at ppbus?
|
||||
|
||||
controller ppc0 at isa? disable port ? tty irq 7
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $
|
||||
# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -1491,6 +1491,12 @@ device vx0
|
||||
device xl0
|
||||
device fpa0
|
||||
device meteor0
|
||||
|
||||
# Brooktree driver has been ported to the new I2C framework. Thus,
|
||||
# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you
|
||||
# want to control other I2C slaves connected to the external connector of
|
||||
# some cards.
|
||||
#
|
||||
device bktr0
|
||||
|
||||
#
|
||||
@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# smb standard io
|
||||
#
|
||||
# Supported interfaces:
|
||||
# iicsmb I2C to SMB bridge
|
||||
# iicsmb I2C to SMB bridge with any iicbus interface
|
||||
# bktr brooktree848 I2C hardware interface
|
||||
#
|
||||
controller smbus0
|
||||
|
||||
@ -1549,8 +1556,13 @@ device smb0 at smbus?
|
||||
#
|
||||
# Supported interfaces:
|
||||
# pcf Philips PCF8584 ISA-bus controller
|
||||
# bktr brooktree848 I2C software interface
|
||||
#
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5
|
||||
# plip Parallel network interface
|
||||
# ppi General-purpose I/O ("Geek Port")
|
||||
# pps Pulse per second Timing Interface
|
||||
# lpbb Philips official parallel port I2C bit-banging interface
|
||||
#
|
||||
# Supported interfaces:
|
||||
# ppc ISA-bus parallel port interfaces.
|
||||
@ -1584,6 +1597,7 @@ device nlpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
device pps0 at ppbus?
|
||||
device lpbb0 at ppbus?
|
||||
|
||||
controller ppc0 at isa? disable port ? tty irq 7
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.492 1998/10/30 20:49:14 des Exp $
|
||||
# $Id: LINT,v 1.493 1998/10/31 14:26:21 peter Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -1491,6 +1491,12 @@ device vx0
|
||||
device xl0
|
||||
device fpa0
|
||||
device meteor0
|
||||
|
||||
# Brooktree driver has been ported to the new I2C framework. Thus,
|
||||
# you'll need at least iicbus, iicbb and smbus. iic/smb are only needed if you
|
||||
# want to control other I2C slaves connected to the external connector of
|
||||
# some cards.
|
||||
#
|
||||
device bktr0
|
||||
|
||||
#
|
||||
@ -1531,7 +1537,8 @@ options POWERFAIL_NMI # make it beep instead of panicing
|
||||
# smb standard io
|
||||
#
|
||||
# Supported interfaces:
|
||||
# iicsmb I2C to SMB bridge
|
||||
# iicsmb I2C to SMB bridge with any iicbus interface
|
||||
# bktr brooktree848 I2C hardware interface
|
||||
#
|
||||
controller smbus0
|
||||
|
||||
@ -1549,8 +1556,13 @@ device smb0 at smbus?
|
||||
#
|
||||
# Supported interfaces:
|
||||
# pcf Philips PCF8584 ISA-bus controller
|
||||
# bktr brooktree848 I2C software interface
|
||||
#
|
||||
# Other:
|
||||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||||
#
|
||||
controller iicbus0
|
||||
controller iicbb0
|
||||
|
||||
device ic0 at iicbus?
|
||||
device iic0 at iicbus?
|
||||
@ -1574,6 +1586,7 @@ controller pcf0 at isa? port 0x320 net irq 5
|
||||
# plip Parallel network interface
|
||||
# ppi General-purpose I/O ("Geek Port")
|
||||
# pps Pulse per second Timing Interface
|
||||
# lpbb Philips official parallel port I2C bit-banging interface
|
||||
#
|
||||
# Supported interfaces:
|
||||
# ppc ISA-bus parallel port interfaces.
|
||||
@ -1584,6 +1597,7 @@ device nlpt0 at ppbus?
|
||||
device plip0 at ppbus?
|
||||
device ppi0 at ppbus?
|
||||
device pps0 at ppbus?
|
||||
device lpbb0 at ppbus?
|
||||
|
||||
controller ppc0 at isa? disable port ? tty irq 7
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user