Move MD devices to <machine>/conf/NOTES.
This commit is contained in:
nyan
parent
f92296e8fd
commit
24d5b420f1
@ -57,12 +57,199 @@ device pci
|
|||||||
|
|
||||||
device mcclock # MC146818 real time clock device
|
device mcclock # MC146818 real time clock device
|
||||||
|
|
||||||
|
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||||||
|
device atkbdc
|
||||||
|
hint.atkbdc.0.at="isa"
|
||||||
|
hint.atkbdc.0.port="0x060"
|
||||||
|
|
||||||
|
# The AT keyboard
|
||||||
|
device atkbd
|
||||||
|
hint.atkbd.0.at="atkbdc"
|
||||||
|
hint.atkbd.0.irq="1"
|
||||||
|
|
||||||
|
# Options for atkbd:
|
||||||
|
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
|
||||||
|
makeoptions ATKBD_DFLT_KEYMAP=jp.106
|
||||||
|
|
||||||
|
# These options are valid for other keyboard drivers as well.
|
||||||
|
options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
|
||||||
|
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
||||||
|
|
||||||
|
# `flags' for atkbd:
|
||||||
|
# 0x01 Force detection of keyboard, else we always assume a keyboard
|
||||||
|
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
|
||||||
|
# 0x03 Force detection and avoid reset, might help with certain
|
||||||
|
# dockingstations
|
||||||
|
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
|
||||||
|
|
||||||
|
# PS/2 mouse
|
||||||
|
device psm
|
||||||
|
hint.psm.0.at="atkbdc"
|
||||||
|
hint.psm.0.irq="12"
|
||||||
|
|
||||||
|
# Options for psm:
|
||||||
|
options PSM_HOOKRESUME #hook the system resume event, useful
|
||||||
|
#for some laptops
|
||||||
|
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
|
||||||
|
|
||||||
|
# Video card driver for VGA adapters.
|
||||||
|
device vga
|
||||||
|
hint.vga.0.at="isa"
|
||||||
|
|
||||||
|
# Options for vga:
|
||||||
|
# Try the following option if the mouse pointer is not drawn correctly
|
||||||
|
# or font does not seem to be loaded properly. May cause flicker on
|
||||||
|
# some systems.
|
||||||
|
options VGA_ALT_SEQACCESS
|
||||||
|
|
||||||
|
# If you can dispense with some vga driver features, you may want to
|
||||||
|
# use the following options to save some memory.
|
||||||
|
#options VGA_NO_FONT_LOADING # don't save/load font
|
||||||
|
#options VGA_NO_MODE_CHANGE # don't change video modes
|
||||||
|
|
||||||
|
# Older video cards may require this option for proper operation.
|
||||||
|
options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
|
||||||
|
|
||||||
|
# The following option probably won't work with the LCD displays.
|
||||||
|
options VGA_WIDTH90 # support 90 column modes
|
||||||
|
|
||||||
|
# Yet more undocumented options for linting.
|
||||||
|
options VGA_DEBUG
|
||||||
|
|
||||||
#
|
#
|
||||||
# Optional devices:
|
# Optional devices:
|
||||||
#
|
#
|
||||||
|
|
||||||
device tga # TGA video card driver
|
device tga # TGA video card driver
|
||||||
|
|
||||||
|
# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
|
||||||
|
# controllers (SmartRAID V and VI and later).
|
||||||
|
# These controllers require the CAM infrastructure.
|
||||||
|
#
|
||||||
|
device asr
|
||||||
|
|
||||||
|
# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
|
||||||
|
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
|
||||||
|
# The DPT controllers are commonly re-licensed under other brand-names -
|
||||||
|
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||||||
|
# Compaq are actually DPT controllers.
|
||||||
|
#
|
||||||
|
# See src/sys/dev/dpt for debugging and other subtle options.
|
||||||
|
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||||||
|
# instruments are enabled. The tools in
|
||||||
|
# /usr/sbin/dpt_* assume these to be enabled.
|
||||||
|
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
|
||||||
|
# If you ant the driver to handle timeouts, enable
|
||||||
|
# this option. If your system is very busy, this
|
||||||
|
# option will create more trouble than solve.
|
||||||
|
# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
|
||||||
|
# wait when timing out with the above option.
|
||||||
|
# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
|
||||||
|
# DPT_LOST_IRQ When enabled, will try, once per second, to catch
|
||||||
|
# any interrupt that got lost. Seems to help in some
|
||||||
|
# DPT-firmware/Motherboard combinations. Minimal
|
||||||
|
# cost, great benefit.
|
||||||
|
# DPT_RESET_HBA Make "reset" actually reset the controller
|
||||||
|
# instead of fudging it. Only enable this if you
|
||||||
|
# are 100% certain you need it.
|
||||||
|
|
||||||
|
device dpt
|
||||||
|
|
||||||
|
# DPT options
|
||||||
|
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||||||
|
#!CAM# options DPT_HANDLE_TIMEOUTS
|
||||||
|
options DPT_TIMEOUT_FACTOR=4
|
||||||
|
options DPT_LOST_IRQ
|
||||||
|
options DPT_RESET_HBA
|
||||||
|
options DPT_ALLOW_MEMIO
|
||||||
|
|
||||||
|
#
|
||||||
|
# Compaq "CISS" RAID controllers (SmartRAID 5* series)
|
||||||
|
# These controllers have a SCSI-like interface, and require the
|
||||||
|
# CAM infrastructure.
|
||||||
|
#
|
||||||
|
device ciss
|
||||||
|
|
||||||
|
#
|
||||||
|
# Intel Integrated RAID controllers.
|
||||||
|
# This driver was developed and is maintained by Intel. Contacts
|
||||||
|
# at Intel for this driver are
|
||||||
|
# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
|
||||||
|
# "Leubner, Achim" <achim.leubner@intel.com>.
|
||||||
|
#
|
||||||
|
device iir
|
||||||
|
|
||||||
|
#
|
||||||
|
# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
|
||||||
|
# firmware. These controllers have a SCSI-like interface, and require
|
||||||
|
# the CAM infrastructure.
|
||||||
|
#
|
||||||
|
device mly
|
||||||
|
|
||||||
|
#
|
||||||
|
# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
|
||||||
|
# one entry is needed; the code will find and configure all supported
|
||||||
|
# controllers.
|
||||||
|
#
|
||||||
|
device ida # Compaq Smart RAID
|
||||||
|
device mlx # Mylex DAC960
|
||||||
|
device amr # AMI MegaRAID
|
||||||
|
|
||||||
|
#
|
||||||
|
# 3ware ATA RAID
|
||||||
|
#
|
||||||
|
device twe # 3ware ATA RAID
|
||||||
|
|
||||||
|
#
|
||||||
|
# SCSI host adapters:
|
||||||
|
#
|
||||||
|
# aha: Adaptec 154x/1535/1640
|
||||||
|
# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
|
||||||
|
# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
|
||||||
|
# wds: WD7000
|
||||||
|
#
|
||||||
|
# Note that the order is important in order for Buslogic ISA/EISA cards to be
|
||||||
|
# probed correctly.
|
||||||
|
#
|
||||||
|
device bt
|
||||||
|
hint.bt.0.at="isa"
|
||||||
|
hint.bt.0.port="0x330"
|
||||||
|
device aha
|
||||||
|
hint.aha.0.at="isa"
|
||||||
|
device wds
|
||||||
|
hint.wds.0.at="isa"
|
||||||
|
hint.wds.0.port="0x350"
|
||||||
|
hint.wds.0.irq="11"
|
||||||
|
hint.wds.0.drq="6"
|
||||||
|
|
||||||
|
#
|
||||||
|
# PC Card/PCMCIA
|
||||||
|
# (OLDCARD)
|
||||||
|
#
|
||||||
|
# card: pccard slots
|
||||||
|
# pcic: isa/pccard bridge
|
||||||
|
#device pcic
|
||||||
|
#hint.pcic.0.at="isa"
|
||||||
|
#hint.pcic.1.at="isa"
|
||||||
|
#device card 1
|
||||||
|
|
||||||
|
#
|
||||||
|
# PC Card/PCMCIA and Cardbus
|
||||||
|
# (NEWCARD)
|
||||||
|
#
|
||||||
|
# Note that NEWCARD and OLDCARD are incompatible. Do not use both at the same
|
||||||
|
# time.
|
||||||
|
#
|
||||||
|
# pccbb: pci/cardbus bridge implementing YENTA interface
|
||||||
|
# pccard: pccard slots
|
||||||
|
# cardbus: cardbus slots
|
||||||
|
device cbb
|
||||||
|
device pccard
|
||||||
|
device cardbus
|
||||||
|
#device pcic ISA attachment currently busted
|
||||||
|
#hint.pcic.0.at="isa"
|
||||||
|
#hint.pcic.1.at="isa"
|
||||||
|
|
||||||
|
|
||||||
#####################################################################
|
#####################################################################
|
||||||
# SIMULATOR OPTIONS
|
# SIMULATOR OPTIONS
|
||||||
|
|||||||
183
sys/conf/NOTES
183
sys/conf/NOTES
@ -1049,62 +1049,6 @@ options MSGBUF_SIZE=40960
|
|||||||
# Mandatory devices:
|
# Mandatory devices:
|
||||||
#
|
#
|
||||||
|
|
||||||
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
|
||||||
device atkbdc
|
|
||||||
hint.atkbdc.0.at="isa"
|
|
||||||
hint.atkbdc.0.port="0x060"
|
|
||||||
|
|
||||||
# The AT keyboard
|
|
||||||
device atkbd
|
|
||||||
hint.atkbd.0.at="atkbdc"
|
|
||||||
hint.atkbd.0.irq="1"
|
|
||||||
|
|
||||||
# Options for atkbd:
|
|
||||||
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
|
|
||||||
makeoptions ATKBD_DFLT_KEYMAP=jp.106
|
|
||||||
|
|
||||||
# These options are valid for other keyboard drivers as well.
|
|
||||||
options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
|
|
||||||
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
|
||||||
|
|
||||||
# `flags' for atkbd:
|
|
||||||
# 0x01 Force detection of keyboard, else we always assume a keyboard
|
|
||||||
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
|
|
||||||
# 0x03 Force detection and avoid reset, might help with certain
|
|
||||||
# dockingstations
|
|
||||||
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
|
|
||||||
|
|
||||||
# PS/2 mouse
|
|
||||||
device psm
|
|
||||||
hint.psm.0.at="atkbdc"
|
|
||||||
hint.psm.0.irq="12"
|
|
||||||
|
|
||||||
# Options for psm:
|
|
||||||
options PSM_HOOKRESUME #hook the system resume event, useful
|
|
||||||
#for some laptops
|
|
||||||
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
|
|
||||||
|
|
||||||
# Video card driver for VGA adapters.
|
|
||||||
device vga
|
|
||||||
hint.vga.0.at="isa"
|
|
||||||
|
|
||||||
# Options for vga:
|
|
||||||
# Try the following option if the mouse pointer is not drawn correctly
|
|
||||||
# or font does not seem to be loaded properly. May cause flicker on
|
|
||||||
# some systems.
|
|
||||||
options VGA_ALT_SEQACCESS
|
|
||||||
|
|
||||||
# If you can dispense with some vga driver features, you may want to
|
|
||||||
# use the following options to save some memory.
|
|
||||||
#options VGA_NO_FONT_LOADING # don't save/load font
|
|
||||||
#options VGA_NO_MODE_CHANGE # don't change video modes
|
|
||||||
|
|
||||||
# Older video cards may require this option for proper operation.
|
|
||||||
options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
|
|
||||||
|
|
||||||
# The following option probably won't work with the LCD displays.
|
|
||||||
options VGA_WIDTH90 # support 90 column modes
|
|
||||||
|
|
||||||
options FB_DEBUG # Frame buffer debugging
|
options FB_DEBUG # Frame buffer debugging
|
||||||
|
|
||||||
device splash # Splash screen and screen saver support
|
device splash # Splash screen and screen saver support
|
||||||
@ -1169,7 +1113,6 @@ options SC_NO_SUSPEND_VTYSWITCH
|
|||||||
#
|
#
|
||||||
# adv: All Narrow SCSI bus AdvanSys controllers.
|
# adv: All Narrow SCSI bus AdvanSys controllers.
|
||||||
# adw: Second Generation AdvanSys controllers including the ADV940UW.
|
# adw: Second Generation AdvanSys controllers including the ADV940UW.
|
||||||
# aha: Adaptec 154x/1535/1640
|
|
||||||
# ahb: Adaptec 174x EISA controllers
|
# ahb: Adaptec 174x EISA controllers
|
||||||
# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
|
# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
|
||||||
# 19160x/29160x, aic7770/aic78xx
|
# 19160x/29160x, aic7770/aic78xx
|
||||||
@ -1177,8 +1120,6 @@ options SC_NO_SUSPEND_VTYSWITCH
|
|||||||
# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
|
# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
|
||||||
# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
|
# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
|
||||||
# such as the Tekram DC-390(T).
|
# such as the Tekram DC-390(T).
|
||||||
# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
|
|
||||||
# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
|
|
||||||
# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
|
# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
|
||||||
# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
|
# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
|
||||||
# ISP 12160 Ultra3 SCSI,
|
# ISP 12160 Ultra3 SCSI,
|
||||||
@ -1193,20 +1134,10 @@ options SC_NO_SUSPEND_VTYSWITCH
|
|||||||
# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
|
# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
|
||||||
# 53C1010-33, 53C1010-66.
|
# 53C1010-33, 53C1010-66.
|
||||||
# trm: Tekram DC395U/UW/F DC315U adapters.
|
# trm: Tekram DC395U/UW/F DC315U adapters.
|
||||||
# wds: WD7000
|
|
||||||
|
|
||||||
#
|
|
||||||
# Note that the order is important in order for Buslogic ISA/EISA cards to be
|
|
||||||
# probed correctly.
|
|
||||||
#
|
|
||||||
device bt
|
|
||||||
hint.bt.0.at="isa"
|
|
||||||
hint.bt.0.port="0x330"
|
|
||||||
device adv
|
device adv
|
||||||
hint.adv.0.at="isa"
|
hint.adv.0.at="isa"
|
||||||
device adw
|
device adw
|
||||||
device aha
|
|
||||||
hint.aha.0.at="isa"
|
|
||||||
device aic
|
device aic
|
||||||
hint.aic.0.at="isa"
|
hint.aic.0.at="isa"
|
||||||
device ahb
|
device ahb
|
||||||
@ -1234,11 +1165,6 @@ device mpt
|
|||||||
device ncr
|
device ncr
|
||||||
device sym
|
device sym
|
||||||
device trm
|
device trm
|
||||||
device wds
|
|
||||||
hint.wds.0.at="isa"
|
|
||||||
hint.wds.0.port="0x350"
|
|
||||||
hint.wds.0.irq="11"
|
|
||||||
hint.wds.0.drq="6"
|
|
||||||
|
|
||||||
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
||||||
# controllers that have it configured only if this option is set. Unfortunately,
|
# controllers that have it configured only if this option is set. Unfortunately,
|
||||||
@ -1285,84 +1211,6 @@ options ISP_TARGET_MODE=1
|
|||||||
#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
|
#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
|
||||||
# default:8, range:[1..64]
|
# default:8, range:[1..64]
|
||||||
|
|
||||||
# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
|
|
||||||
# controllers (SmartRAID V and VI and later).
|
|
||||||
# These controllers require the CAM infrastructure.
|
|
||||||
#
|
|
||||||
device asr
|
|
||||||
|
|
||||||
# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
|
|
||||||
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
|
|
||||||
# The DPT controllers are commonly re-licensed under other brand-names -
|
|
||||||
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
|
||||||
# Compaq are actually DPT controllers.
|
|
||||||
#
|
|
||||||
# See src/sys/dev/dpt for debugging and other subtle options.
|
|
||||||
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
|
||||||
# instruments are enabled. The tools in
|
|
||||||
# /usr/sbin/dpt_* assume these to be enabled.
|
|
||||||
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
|
|
||||||
# If you ant the driver to handle timeouts, enable
|
|
||||||
# this option. If your system is very busy, this
|
|
||||||
# option will create more trouble than solve.
|
|
||||||
# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
|
|
||||||
# wait when timing out with the above option.
|
|
||||||
# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
|
|
||||||
# DPT_LOST_IRQ When enabled, will try, once per second, to catch
|
|
||||||
# any interrupt that got lost. Seems to help in some
|
|
||||||
# DPT-firmware/Motherboard combinations. Minimal
|
|
||||||
# cost, great benefit.
|
|
||||||
# DPT_RESET_HBA Make "reset" actually reset the controller
|
|
||||||
# instead of fudging it. Only enable this if you
|
|
||||||
# are 100% certain you need it.
|
|
||||||
|
|
||||||
device dpt
|
|
||||||
|
|
||||||
# DPT options
|
|
||||||
#!CAM# options DPT_MEASURE_PERFORMANCE
|
|
||||||
#!CAM# options DPT_HANDLE_TIMEOUTS
|
|
||||||
options DPT_TIMEOUT_FACTOR=4
|
|
||||||
options DPT_LOST_IRQ
|
|
||||||
options DPT_RESET_HBA
|
|
||||||
options DPT_ALLOW_MEMIO
|
|
||||||
|
|
||||||
#
|
|
||||||
# Compaq "CISS" RAID controllers (SmartRAID 5* series)
|
|
||||||
# These controllers have a SCSI-like interface, and require the
|
|
||||||
# CAM infrastructure.
|
|
||||||
#
|
|
||||||
device ciss
|
|
||||||
|
|
||||||
#
|
|
||||||
# Intel Integrated RAID controllers.
|
|
||||||
# This driver was developed and is maintained by Intel. Contacts
|
|
||||||
# at Intel for this driver are
|
|
||||||
# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
|
|
||||||
# "Leubner, Achim" <achim.leubner@intel.com>.
|
|
||||||
#
|
|
||||||
device iir
|
|
||||||
|
|
||||||
#
|
|
||||||
# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
|
|
||||||
# firmware. These controllers have a SCSI-like interface, and require
|
|
||||||
# the CAM infrastructure.
|
|
||||||
#
|
|
||||||
device mly
|
|
||||||
|
|
||||||
#
|
|
||||||
# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
|
|
||||||
# one entry is needed; the code will find and configure all supported
|
|
||||||
# controllers.
|
|
||||||
#
|
|
||||||
device ida # Compaq Smart RAID
|
|
||||||
device mlx # Mylex DAC960
|
|
||||||
device amr # AMI MegaRAID
|
|
||||||
|
|
||||||
#
|
|
||||||
# 3ware ATA RAID
|
|
||||||
#
|
|
||||||
device twe # 3ware ATA RAID
|
|
||||||
|
|
||||||
#
|
#
|
||||||
# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
|
# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
|
||||||
# devices. You only need one "device ata" for it to find all
|
# devices. You only need one "device ata" for it to find all
|
||||||
@ -1907,34 +1755,6 @@ device meteor 1
|
|||||||
#
|
#
|
||||||
device bktr
|
device bktr
|
||||||
|
|
||||||
#
|
|
||||||
# PC Card/PCMCIA
|
|
||||||
# (OLDCARD)
|
|
||||||
#
|
|
||||||
# card: pccard slots
|
|
||||||
# pcic: isa/pccard bridge
|
|
||||||
#device pcic
|
|
||||||
#hint.pcic.0.at="isa"
|
|
||||||
#hint.pcic.1.at="isa"
|
|
||||||
#device card 1
|
|
||||||
|
|
||||||
#
|
|
||||||
# PC Card/PCMCIA and Cardbus
|
|
||||||
# (NEWCARD)
|
|
||||||
#
|
|
||||||
# Note that NEWCARD and OLDCARD are incompatible. Do not use both at the same
|
|
||||||
# time.
|
|
||||||
#
|
|
||||||
# pccbb: pci/cardbus bridge implementing YENTA interface
|
|
||||||
# pccard: pccard slots
|
|
||||||
# cardbus: cardbus slots
|
|
||||||
device cbb
|
|
||||||
device pccard
|
|
||||||
device cardbus
|
|
||||||
#device pcic ISA attachment currently busted
|
|
||||||
#hint.pcic.0.at="isa"
|
|
||||||
#hint.pcic.1.at="isa"
|
|
||||||
|
|
||||||
#
|
#
|
||||||
# SMB bus
|
# SMB bus
|
||||||
#
|
#
|
||||||
@ -2298,6 +2118,3 @@ options MAXFILES=999
|
|||||||
options METEOR_TEST_VIDEO
|
options METEOR_TEST_VIDEO
|
||||||
options NDEVFSINO=1025
|
options NDEVFSINO=1025
|
||||||
options NDEVFSOVERFLOW=32769
|
options NDEVFSOVERFLOW=32769
|
||||||
|
|
||||||
# Yet more undocumented options for linting.
|
|
||||||
options VGA_DEBUG
|
|
||||||
|
|||||||
@ -341,6 +341,65 @@ device agp
|
|||||||
# Mandatory devices:
|
# Mandatory devices:
|
||||||
#
|
#
|
||||||
|
|
||||||
|
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
|
||||||
|
device atkbdc
|
||||||
|
hint.atkbdc.0.at="isa"
|
||||||
|
hint.atkbdc.0.port="0x060"
|
||||||
|
|
||||||
|
# The AT keyboard
|
||||||
|
device atkbd
|
||||||
|
hint.atkbd.0.at="atkbdc"
|
||||||
|
hint.atkbd.0.irq="1"
|
||||||
|
|
||||||
|
# Options for atkbd:
|
||||||
|
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
|
||||||
|
makeoptions ATKBD_DFLT_KEYMAP=jp.106
|
||||||
|
|
||||||
|
# These options are valid for other keyboard drivers as well.
|
||||||
|
options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
|
||||||
|
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
||||||
|
|
||||||
|
# `flags' for atkbd:
|
||||||
|
# 0x01 Force detection of keyboard, else we always assume a keyboard
|
||||||
|
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
|
||||||
|
# 0x03 Force detection and avoid reset, might help with certain
|
||||||
|
# dockingstations
|
||||||
|
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
|
||||||
|
|
||||||
|
# PS/2 mouse
|
||||||
|
device psm
|
||||||
|
hint.psm.0.at="atkbdc"
|
||||||
|
hint.psm.0.irq="12"
|
||||||
|
|
||||||
|
# Options for psm:
|
||||||
|
options PSM_HOOKRESUME #hook the system resume event, useful
|
||||||
|
#for some laptops
|
||||||
|
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
|
||||||
|
|
||||||
|
# Video card driver for VGA adapters.
|
||||||
|
device vga
|
||||||
|
hint.vga.0.at="isa"
|
||||||
|
|
||||||
|
# Options for vga:
|
||||||
|
# Try the following option if the mouse pointer is not drawn correctly
|
||||||
|
# or font does not seem to be loaded properly. May cause flicker on
|
||||||
|
# some systems.
|
||||||
|
options VGA_ALT_SEQACCESS
|
||||||
|
|
||||||
|
# If you can dispense with some vga driver features, you may want to
|
||||||
|
# use the following options to save some memory.
|
||||||
|
#options VGA_NO_FONT_LOADING # don't save/load font
|
||||||
|
#options VGA_NO_MODE_CHANGE # don't change video modes
|
||||||
|
|
||||||
|
# Older video cards may require this option for proper operation.
|
||||||
|
options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
|
||||||
|
|
||||||
|
# The following option probably won't work with the LCD displays.
|
||||||
|
options VGA_WIDTH90 # support 90 column modes
|
||||||
|
|
||||||
|
# Yet more undocumented options for linting.
|
||||||
|
options VGA_DEBUG
|
||||||
|
|
||||||
# To include support for VGA VESA video modes
|
# To include support for VGA VESA video modes
|
||||||
options VESA
|
options VESA
|
||||||
|
|
||||||
@ -557,6 +616,84 @@ device pca
|
|||||||
hint.pca.0.at="isa"
|
hint.pca.0.at="isa"
|
||||||
hint.pca.0.port="0x040"
|
hint.pca.0.port="0x040"
|
||||||
|
|
||||||
|
# The 'asr' driver provides support for current DPT/Adaptec SCSI RAID
|
||||||
|
# controllers (SmartRAID V and VI and later).
|
||||||
|
# These controllers require the CAM infrastructure.
|
||||||
|
#
|
||||||
|
device asr
|
||||||
|
|
||||||
|
# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
|
||||||
|
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
|
||||||
|
# The DPT controllers are commonly re-licensed under other brand-names -
|
||||||
|
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||||||
|
# Compaq are actually DPT controllers.
|
||||||
|
#
|
||||||
|
# See src/sys/dev/dpt for debugging and other subtle options.
|
||||||
|
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||||||
|
# instruments are enabled. The tools in
|
||||||
|
# /usr/sbin/dpt_* assume these to be enabled.
|
||||||
|
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
|
||||||
|
# If you ant the driver to handle timeouts, enable
|
||||||
|
# this option. If your system is very busy, this
|
||||||
|
# option will create more trouble than solve.
|
||||||
|
# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
|
||||||
|
# wait when timing out with the above option.
|
||||||
|
# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
|
||||||
|
# DPT_LOST_IRQ When enabled, will try, once per second, to catch
|
||||||
|
# any interrupt that got lost. Seems to help in some
|
||||||
|
# DPT-firmware/Motherboard combinations. Minimal
|
||||||
|
# cost, great benefit.
|
||||||
|
# DPT_RESET_HBA Make "reset" actually reset the controller
|
||||||
|
# instead of fudging it. Only enable this if you
|
||||||
|
# are 100% certain you need it.
|
||||||
|
|
||||||
|
device dpt
|
||||||
|
|
||||||
|
# DPT options
|
||||||
|
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||||||
|
#!CAM# options DPT_HANDLE_TIMEOUTS
|
||||||
|
options DPT_TIMEOUT_FACTOR=4
|
||||||
|
options DPT_LOST_IRQ
|
||||||
|
options DPT_RESET_HBA
|
||||||
|
options DPT_ALLOW_MEMIO
|
||||||
|
|
||||||
|
#
|
||||||
|
# Compaq "CISS" RAID controllers (SmartRAID 5* series)
|
||||||
|
# These controllers have a SCSI-like interface, and require the
|
||||||
|
# CAM infrastructure.
|
||||||
|
#
|
||||||
|
device ciss
|
||||||
|
|
||||||
|
#
|
||||||
|
# Intel Integrated RAID controllers.
|
||||||
|
# This driver was developed and is maintained by Intel. Contacts
|
||||||
|
# at Intel for this driver are
|
||||||
|
# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
|
||||||
|
# "Leubner, Achim" <achim.leubner@intel.com>.
|
||||||
|
#
|
||||||
|
device iir
|
||||||
|
|
||||||
|
#
|
||||||
|
# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
|
||||||
|
# firmware. These controllers have a SCSI-like interface, and require
|
||||||
|
# the CAM infrastructure.
|
||||||
|
#
|
||||||
|
device mly
|
||||||
|
|
||||||
|
#
|
||||||
|
# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
|
||||||
|
# one entry is needed; the code will find and configure all supported
|
||||||
|
# controllers.
|
||||||
|
#
|
||||||
|
device ida # Compaq Smart RAID
|
||||||
|
device mlx # Mylex DAC960
|
||||||
|
device amr # AMI MegaRAID
|
||||||
|
|
||||||
|
#
|
||||||
|
# 3ware ATA RAID
|
||||||
|
#
|
||||||
|
device twe # 3ware ATA RAID
|
||||||
|
|
||||||
#
|
#
|
||||||
# ATA raid adapters
|
# ATA raid adapters
|
||||||
#
|
#
|
||||||
@ -565,10 +702,27 @@ device pst
|
|||||||
#
|
#
|
||||||
# SCSI host adapters:
|
# SCSI host adapters:
|
||||||
#
|
#
|
||||||
|
# aha: Adaptec 154x/1535/1640
|
||||||
|
# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
|
||||||
|
# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
|
||||||
# ncv: NCR 53C500 based SCSI host adapters.
|
# ncv: NCR 53C500 based SCSI host adapters.
|
||||||
# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
|
# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
|
||||||
# stg: TMC 18C30, 18C50 based SCSI host adapters.
|
# stg: TMC 18C30, 18C50 based SCSI host adapters.
|
||||||
|
# wds: WD7000
|
||||||
|
#
|
||||||
|
# Note that the order is important in order for Buslogic ISA/EISA cards to be
|
||||||
|
# probed correctly.
|
||||||
|
#
|
||||||
|
device bt
|
||||||
|
hint.bt.0.at="isa"
|
||||||
|
hint.bt.0.port="0x330"
|
||||||
|
device aha
|
||||||
|
hint.aha.0.at="isa"
|
||||||
|
device wds
|
||||||
|
hint.wds.0.at="isa"
|
||||||
|
hint.wds.0.port="0x350"
|
||||||
|
hint.wds.0.irq="11"
|
||||||
|
hint.wds.0.drq="6"
|
||||||
device ncv
|
device ncv
|
||||||
device nsp
|
device nsp
|
||||||
device stg
|
device stg
|
||||||
@ -742,6 +896,34 @@ device xrpu
|
|||||||
|
|
||||||
options POWERFAIL_NMI # make it beep instead of panicing
|
options POWERFAIL_NMI # make it beep instead of panicing
|
||||||
|
|
||||||
|
#
|
||||||
|
# PC Card/PCMCIA
|
||||||
|
# (OLDCARD)
|
||||||
|
#
|
||||||
|
# card: pccard slots
|
||||||
|
# pcic: isa/pccard bridge
|
||||||
|
#device pcic
|
||||||
|
#hint.pcic.0.at="isa"
|
||||||
|
#hint.pcic.1.at="isa"
|
||||||
|
#device card 1
|
||||||
|
|
||||||
|
#
|
||||||
|
# PC Card/PCMCIA and Cardbus
|
||||||
|
# (NEWCARD)
|
||||||
|
#
|
||||||
|
# Note that NEWCARD and OLDCARD are incompatible. Do not use both at the same
|
||||||
|
# time.
|
||||||
|
#
|
||||||
|
# pccbb: pci/cardbus bridge implementing YENTA interface
|
||||||
|
# pccard: pccard slots
|
||||||
|
# cardbus: cardbus slots
|
||||||
|
device cbb
|
||||||
|
device pccard
|
||||||
|
device cardbus
|
||||||
|
#device pcic ISA attachment currently busted
|
||||||
|
#hint.pcic.0.at="isa"
|
||||||
|
#hint.pcic.1.at="isa"
|
||||||
|
|
||||||
#
|
#
|
||||||
# I2C Bus
|
# I2C Bus
|
||||||
#
|
#
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user