diff --git a/ObsoleteFiles.inc b/ObsoleteFiles.inc index 3bac420fbbc9..7e5aafd99022 100644 --- a/ObsoleteFiles.inc +++ b/ObsoleteFiles.inc @@ -38,6 +38,8 @@ # xargs -n1 | sort | uniq -d; # done +# 20180502: retire ixgb +OLD_FILES+=usr/share/man/man4/ixgb.4.gz # 20180501: retire lmc OLD_FILES+=usr/include/dev/lmc/if_lmc.h OLD_DIRS+=usr/include/dev/lmc diff --git a/UPDATING b/UPDATING index d0114df3a629..3fc3bb1ed92a 100644 --- a/UPDATING +++ b/UPDATING @@ -51,6 +51,12 @@ NOTE TO PEOPLE WHO THINK THAT FreeBSD 12.x IS SLOW: ****************************** SPECIAL WARNING: ****************************** +20180502: + The ixgb(4) driver has been removed. This driver was for an early and + uncommon legacy PCI 10GbE for a single ASIC, Intel 82597EX. Intel + quickly shifted to the long lived ixgbe family. If you have device + ixgb in your kernel config file it must be removed. + 20180501: The lmc(4) driver has been removed. This was a WAN interface card that was already reportedly rare in 2003, and had an ambiguous diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile index f3b1dc383725..cbaee4824941 100644 --- a/share/man/man4/Makefile +++ b/share/man/man4/Makefile @@ -244,7 +244,6 @@ MAN= aac.4 \ iwmfw.4 \ iwn.4 \ iwnfw.4 \ - ixgb.4 \ ixgbe.4 \ ixl.4 \ ixlv.4 \ @@ -675,7 +674,6 @@ MLINKS+=ipw.4 if_ipw.4 MLINKS+=iwi.4 if_iwi.4 MLINKS+=iwm.4 if_iwm.4 MLINKS+=iwn.4 if_iwn.4 -MLINKS+=ixgb.4 if_ixgb.4 MLINKS+=ixgbe.4 ix.4 MLINKS+=ixgbe.4 if_ix.4 MLINKS+=ixgbe.4 if_ixgbe.4 diff --git a/share/man/man4/ixgb.4 b/share/man/man4/ixgb.4 deleted file mode 100644 index 2596f2644ff1..000000000000 --- a/share/man/man4/ixgb.4 +++ /dev/null @@ -1,131 +0,0 @@ -.\" Copyright (c) 2001-2004, Intel Corporation -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions are met: -.\" -.\" 1. Redistributions of source code must retain the above copyright notice, -.\" this list of conditions and the following disclaimer. -.\" -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" -.\" 3. Neither the name of the Intel Corporation nor the names of its -.\" contributors may be used to endorse or promote products derived from -.\" this software without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -.\" POSSIBILITY OF SUCH DAMAGE. -.\" -.\" * Other names and brands may be claimed as the property of others. -.\" -.\" $FreeBSD$ -.\" -.Dd April 30, 2018 -.Dt IXGB 4 -.Os -.Sh NAME -.Nm ixgb -.Nd "Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system" -.Sh SYNOPSIS -To compile this driver into the kernel, -place the following line in your -kernel configuration file: -.Bd -ragged -offset indent -.Cd "device ixgb" -.Ed -.Pp -Alternatively, to load the driver as a -module at boot time, place the following line in -.Xr loader.conf 5 : -.Bd -literal -offset indent -if_ixgb_load="YES" -.Ed -.Sh DEPRECATION NOTICE -The -.Nm -driver is not present in -.Fx 12.0 -and later. -.Sh DESCRIPTION -The -.Nm -driver provides support for PCI Gigabit Ethernet adapters based on -the Intel 82597EX Ethernet controller chips. -The driver supports Transmit/Receive checksum offload -and Jumbo Frames. -.Pp -For questions related to hardware requirements, -refer to the documentation supplied with your Intel PRO/10GbE adapter. -All hardware requirements listed apply to use with -.Fx . -.Pp -Support for Jumbo Frames is provided via the interface MTU setting. -Selecting an MTU larger than 1500 bytes with the -.Xr ifconfig 8 -utility configures the adapter to receive and transmit Jumbo Frames. -The maximum MTU size for Jumbo Frames is 16114. -.Pp -This driver version supports VLANs. -For information on enabling VLANs, see -.Xr ifconfig 8 . -.Sh HARDWARE -The -.Nm -driver supports the following cards: -.Pp -.Bl -bullet -compact -.It -Intel PRO/10GbE LR Server Adapter -.It -Intel PRO/10GbE SR Server Adapter -.El -.Sh DIAGNOSTICS -.Bl -diag -.It "ixgb%d: Unable to allocate bus resource: memory" -A fatal initialization error has occurred. -.It "ixgb%d: Unable to allocate bus resource: interrupt" -A fatal initialization error has occurred. -.It "ixgb%d: watchdog timeout -- resetting" -The device has stopped responding to the network, or there is a problem with -the network connection (cable). -.El -.Sh SUPPORT -For general information and support, -go to the Intel support website at: -.Pa http://support.intel.com . -.Pp -If an issue is identified with the released source code on the supported kernel -with a supported adapter, email the specific information related to the -issue to -.Aq Mt freebsd@intel.com . -.Sh SEE ALSO -.Xr arp 4 , -.Xr em 4 , -.Xr netintro 4 , -.Xr ng_ether 4 , -.Xr polling 4 , -.Xr vlan 4 , -.Xr ifconfig 8 -.Sh HISTORY -The -.Nm -device driver first appeared in -.Fx 4.11 -and -.Fx 5.3 . -.Sh AUTHORS -The -.Nm -driver was written by -.An Intel Corporation Aq Mt freebsd@intel.com . diff --git a/share/man/man4/polling.4 b/share/man/man4/polling.4 index 2d9018cb3de0..621f6366b87c 100644 --- a/share/man/man4/polling.4 +++ b/share/man/man4/polling.4 @@ -185,7 +185,6 @@ As of this writing, the .Xr fwip 4 , .Xr fxp 4 , .Xr igb 4 , -.Xr ixgb 4 , .Xr nfe 4 , .Xr nge 4 , .Xr re 4 , diff --git a/share/man/man4/vlan.4 b/share/man/man4/vlan.4 index ba2dfe101cd1..a9e440cb3707 100644 --- a/share/man/man4/vlan.4 +++ b/share/man/man4/vlan.4 @@ -132,7 +132,6 @@ in hardware: .Xr cxgbe 4 , .Xr em 4 , .Xr igb 4 , -.Xr ixgb 4 , .Xr ixgbe 4 , .Xr jme 4 , .Xr liquidio 4 , diff --git a/sys/conf/NOTES b/sys/conf/NOTES index e3bfd1788adc..80be80579247 100644 --- a/sys/conf/NOTES +++ b/sys/conf/NOTES @@ -2123,7 +2123,6 @@ device cxgbe # Chelsio T4-T6 1/10/25/40/100 Gigabit Ethernet device cxgbev # Chelsio T4-T6 Virtual Functions device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel Pro/1000 Gigabit Ethernet -device ixgb # Intel Pro/10Gbe PCI-X Ethernet device ix # Intel Pro/10Gbe PCIE Ethernet device ixv # Intel Pro/10Gbe PCIE Ethernet VF device le # AMD Am7900 LANCE and Am79C9xx PCnet diff --git a/sys/conf/files b/sys/conf/files index 8389ceb235c2..0e0ea415d226 100644 --- a/sys/conf/files +++ b/sys/conf/files @@ -2264,9 +2264,6 @@ iwn6050.fw optional iwn6050fw | iwnfw \ compile-with "${NORMAL_FW}" \ no-obj no-implicit-rule \ clean "iwn6050.fw" -dev/ixgb/if_ixgb.c optional ixgb -dev/ixgb/ixgb_ee.c optional ixgb -dev/ixgb/ixgb_hw.c optional ixgb dev/ixgbe/if_ix.c optional ix inet \ compile-with "${NORMAL_C} -I$S/dev/ixgbe -DSMP" dev/ixgbe/if_ixv.c optional ixv inet \ diff --git a/sys/dev/ixgb/LICENSE b/sys/dev/ixgb/LICENSE deleted file mode 100644 index 501764514696..000000000000 --- a/sys/dev/ixgb/LICENSE +++ /dev/null @@ -1,33 +0,0 @@ -/*$FreeBSD$*/ -/*- - -Copyright (c) 2001-2004, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -*/ diff --git a/sys/dev/ixgb/README b/sys/dev/ixgb/README deleted file mode 100644 index 89e44c07432a..000000000000 --- a/sys/dev/ixgb/README +++ /dev/null @@ -1,237 +0,0 @@ -/*$FreeBSD$*/ -FreeBSD Driver for Intel(R) PRO/10GbE Server Adapters -===================================================== - -March 10, 2004 - - -Contents -======== - -- Overview -- Supported Adapters -- Building and Installation -- Additional Configurations - - -Overview -======== - -This file describes the FreeBSD* driver, version 1.0.x, for the Intel(R) -PRO/10GbE Family of Adapters. This driver has been developed for use with -FreeBSD, version 4.8 and later. - -For questions related to hardware requirements, refer to the documentation -supplied with your Intel PRO/10GbE adapter. All hardware requirements listed -apply to use with FreeBSD. - - - -Supported Adapters -================== - -The following Intel network adapters are compatible with the drivers in this -release: - - Controller Adapter Name Physical Layer - ---------- ------------ -------------- - - 82597EX PRO/10GbE LR/SR Server Adapter 10G Base -LR and -SR - 850 and 1310 nm optical fiber - - -Building and Installation -========================= - -NOTE: You must have kernel sources installed in order to compile the driver - module. - - In the instructions below, x.x.x is the driver version as indicated in - the name of the driver tar. - - -1. Move the base driver tar file to the directory of your choice. For - example, use /home/username/ixgb or /usr/local/src/ixgb. - -2. Untar/unzip the archive: - tar xfz ixgb-x.x.x.tar.gz - -3. To install man page: - cd ixgb-x.x.x - gzip -c ixgb.4 > /usr/share/man/man4/ixgb.4.gz - -4. To load the driver onto a running system: - cd ixgb-x.x.x/src - make load - -5. To assign an IP address to the interface, enter the following: - ifconfig ixgb - -6. Verify that the interface works. Enter the following, where - is the IP address for another machine on the same subnet as the interface - that is being tested: - ping - -7. If you want the driver to load automatically when the system is booted: - - cd ixgb-x.x.x/src - make load - cp if_ixgb.ko /modules - - Edit /boot/loader.conf, and add the following line: - if_ixgb_load="YES" - - OR - - compile the driver into the kernel (see item 7). - - - Edit /etc/rc.conf, and create the appropriate ifconfig_ixgb - entry: - - ifconfig_ixgb="" - - Example usage: - - ifconfig_ixgb0="inet 192.168.10.1 netmask 255.255.255.0" - - NOTE: For assistance, see the ifconfig man page. - -8. If you want to compile the driver into the kernel, enter: - - cd ixgb-x.x.x/src - - mkdir /usr/src/sys/dev/ixgb - - cp if_ixgb* /usr/src/sys/dev/ixgb - - cp ixgb* /usr/src/sys/dev/ixgb - - cp Makefile.kernel /usr/src/sys/modules/ixgb/Makefile - - If you have an i386 platform, you will need to edit the files.i386 file. - This is usually in /usr/src/sys/conf/; actual locations wil vary depending - on platform. Add the following lines: - - dev/ixgb/ixgb_hw.c optional ixgb - dev/ixgb/ixgb_ee.c optional ixgb - dev/ixgb/if_ixgb.c optional ixgb - - - Remove the following lines from the files.i386 file, if they exist: - - /dev/ixgb/if_ixgb_fx_hw.c optional ixgb - /dev/ixgb/if_ixgb_phy.c optional ixgb - - Edit the kernel configuration file (i.e., GENERIC or MYKERNEL) in - /usr/src/sys/i386/conf, and ensure the following line is present: - - device ixgb - - Compile and install the kernel. The system must be reboot for the kernel - updates to take affect. For additional information on compiling the kernel, - consult the FreeBSD operating system documentation. - - - -Additional Configurations -========================= - -The driver supports Transmit/Receive Checksum Offload and Jumbo Frames on -all PRO/10GbE adapters. - - Jumbo Frames - ------------ - To enable Jumbo Frames, use the ifconfig utility to increase the MTU - beyond 1500 bytes. - - NOTES: - - Only enable Jumbo Frames if your network infrastructure supports - them. - - - The Jumbo Frames setting on the switch must be set to at least - 22 bytes larger than that of the adapter. - - - There are known performance issues with this driver when running - UDP traffic with Jumbo Frames. - - The Jumbo Frames MTU range for Intel Adapters is 1500 to 16114. The default - MTU range is 1500. To modify the setting, enter the following: - - ifconfig ixgb mtu 9000 - - To confirm an interface's MTU value, use the ifconfig command. To confirm - the MTU used between two specific devices, use: - - route get - - VLANs - ----- - To create a new VLAN pseudo-interface: - - ifconfig create - - To associate the VLAN pseudo-interface with a physical interface and - assign a VLAN ID, IP address, and netmask: - - ifconfig netmask vlan - vlandev - - Example: - - ifconfig vlan10 10.0.0.1 netmask 255.255.255.0 vlan10 vlandev ixgb0 - - In this example, all packets will be marked on egress with 802.1Q VLAN - tags, specifying a VLAN ID of 10. - - To remove a VLAN pseudo-interface: - - ifconfig destroy - - Polling - ------- - To enable polling in the driver, add the following options to the kernel - configuration, and then recompile the kernel: - - options DEVICE_POLLING - options HZ=1000 - - At runtime, use the following command to turn on polling mode. - - ifconfig ixgb0 polling - - Similarly, turn off polling mode by removing IFCAP_POLLING flag from - interface: - - ifconfig ixgb0 -polling - - The driver has to be built into the kernel for DEVICE POLLING to be - enabled in the driver. - -Support -======= - -For general information and support, go to the Intel support website at: - - http://support.intel.com - -If an issue is identified with the released source code on the supported -kernel with a supported adapter, email the specific information related to -the issue to freebsd@intel.com. - - - -License -======= - -This software program is released under the terms of a license agreement -between you ('Licensee') and Intel. Do not use or load this software or any -associated materials (collectively, the 'Software') until you have carefully -read the full terms and conditions of the LICENSE located in this software -package. By loading or using the Software, you agree to the terms of this -Agreement. If you do not agree with the terms of this Agreement, do not -install or use the Software. - -* Other names and brands may be claimed as the property of others. - - diff --git a/sys/dev/ixgb/if_ixgb.c b/sys/dev/ixgb/if_ixgb.c deleted file mode 100644 index 036e468af502..000000000000 --- a/sys/dev/ixgb/if_ixgb.c +++ /dev/null @@ -1,2534 +0,0 @@ -/******************************************************************************* -SPDX-License-Identifier: BSD-3-Clause - -Copyright (c) 2001-2004, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -***************************************************************************/ - -/*$FreeBSD$*/ - -#ifdef HAVE_KERNEL_OPTION_HEADERS -#include "opt_device_polling.h" -#endif - -#include - -/********************************************************************* - * Set this to one to display debug statistics - *********************************************************************/ -int ixgb_display_debug_stats = 0; - -/********************************************************************* - * Linked list of board private structures for all NICs found - *********************************************************************/ - -struct adapter *ixgb_adapter_list = NULL; - - - -/********************************************************************* - * Driver version - *********************************************************************/ - -char ixgb_driver_version[] = "1.0.6"; -char ixgb_copyright[] = "Copyright (c) 2001-2004 Intel Corporation."; - -/********************************************************************* - * PCI Device ID Table - * - * Used by probe to select devices to load on - * Last field stores an index into ixgb_strings - * Last entry must be all 0s - * - * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index } - *********************************************************************/ - -static ixgb_vendor_info_t ixgb_vendor_info_array[] = -{ - /* Intel(R) PRO/10000 Network Connection */ - {IXGB_VENDOR_ID, IXGB_DEVICE_ID_82597EX, PCI_ANY_ID, PCI_ANY_ID, 0}, - {IXGB_VENDOR_ID, IXGB_DEVICE_ID_82597EX_SR, PCI_ANY_ID, PCI_ANY_ID, 0}, - /* required last entry */ - {0, 0, 0, 0, 0} -}; - -/********************************************************************* - * Table of branding strings for all supported NICs. - *********************************************************************/ - -static char *ixgb_strings[] = { - "Intel(R) PRO/10GbE Network Driver" -}; - -/********************************************************************* - * Function prototypes - *********************************************************************/ -static int ixgb_probe(device_t); -static int ixgb_attach(device_t); -static int ixgb_detach(device_t); -static int ixgb_shutdown(device_t); -static void ixgb_intr(void *); -static void ixgb_start(struct ifnet *); -static void ixgb_start_locked(struct ifnet *); -static int ixgb_ioctl(struct ifnet *, IOCTL_CMD_TYPE, caddr_t); -static uint64_t ixgb_get_counter(struct ifnet *, ift_counter); -static void ixgb_watchdog(struct adapter *); -static void ixgb_init(void *); -static void ixgb_init_locked(struct adapter *); -static void ixgb_stop(void *); -static void ixgb_media_status(struct ifnet *, struct ifmediareq *); -static int ixgb_media_change(struct ifnet *); -static void ixgb_identify_hardware(struct adapter *); -static int ixgb_allocate_pci_resources(struct adapter *); -static void ixgb_free_pci_resources(struct adapter *); -static void ixgb_local_timer(void *); -static int ixgb_hardware_init(struct adapter *); -static int ixgb_setup_interface(device_t, struct adapter *); -static int ixgb_setup_transmit_structures(struct adapter *); -static void ixgb_initialize_transmit_unit(struct adapter *); -static int ixgb_setup_receive_structures(struct adapter *); -static void ixgb_initialize_receive_unit(struct adapter *); -static void ixgb_enable_intr(struct adapter *); -static void ixgb_disable_intr(struct adapter *); -static void ixgb_free_transmit_structures(struct adapter *); -static void ixgb_free_receive_structures(struct adapter *); -static void ixgb_update_stats_counters(struct adapter *); -static void ixgb_clean_transmit_interrupts(struct adapter *); -static int ixgb_allocate_receive_structures(struct adapter *); -static int ixgb_allocate_transmit_structures(struct adapter *); -static int ixgb_process_receive_interrupts(struct adapter *, int); -static void -ixgb_receive_checksum(struct adapter *, - struct ixgb_rx_desc * rx_desc, - struct mbuf *); -static void -ixgb_transmit_checksum_setup(struct adapter *, - struct mbuf *, - u_int8_t *); -static void ixgb_set_promisc(struct adapter *); -static void ixgb_disable_promisc(struct adapter *); -static void ixgb_set_multi(struct adapter *); -static void ixgb_print_hw_stats(struct adapter *); -static void ixgb_print_link_status(struct adapter *); -static int -ixgb_get_buf(int i, struct adapter *, - struct mbuf *); -static void ixgb_enable_vlans(struct adapter * adapter); -static int ixgb_encap(struct adapter * adapter, struct mbuf * m_head); -static int ixgb_sysctl_stats(SYSCTL_HANDLER_ARGS); -static int -ixgb_dma_malloc(struct adapter *, bus_size_t, - struct ixgb_dma_alloc *, int); -static void ixgb_dma_free(struct adapter *, struct ixgb_dma_alloc *); -#ifdef DEVICE_POLLING -static poll_handler_t ixgb_poll; -#endif - -/********************************************************************* - * FreeBSD Device Interface Entry Points - *********************************************************************/ - -static device_method_t ixgb_methods[] = { - /* Device interface */ - DEVMETHOD(device_probe, ixgb_probe), - DEVMETHOD(device_attach, ixgb_attach), - DEVMETHOD(device_detach, ixgb_detach), - DEVMETHOD(device_shutdown, ixgb_shutdown), - - DEVMETHOD_END -}; - -static driver_t ixgb_driver = { - "ixgb", ixgb_methods, sizeof(struct adapter), -}; - -static devclass_t ixgb_devclass; -DRIVER_MODULE(ixgb, pci, ixgb_driver, ixgb_devclass, 0, 0); - -MODULE_DEPEND(ixgb, pci, 1, 1, 1); -MODULE_DEPEND(ixgb, ether, 1, 1, 1); - -/* some defines for controlling descriptor fetches in h/w */ -#define RXDCTL_PTHRESH_DEFAULT 128 /* chip considers prefech below this */ -#define RXDCTL_HTHRESH_DEFAULT 16 /* chip will only prefetch if tail is - * pushed this many descriptors from - * head */ -#define RXDCTL_WTHRESH_DEFAULT 0 /* chip writes back at this many or RXT0 */ - - -/********************************************************************* - * Device identification routine - * - * ixgb_probe determines if the driver should be loaded on - * adapter based on PCI vendor/device id of the adapter. - * - * return 0 on success, positive on failure - *********************************************************************/ - -static int -ixgb_probe(device_t dev) -{ - ixgb_vendor_info_t *ent; - - u_int16_t pci_vendor_id = 0; - u_int16_t pci_device_id = 0; - u_int16_t pci_subvendor_id = 0; - u_int16_t pci_subdevice_id = 0; - char adapter_name[60]; - - INIT_DEBUGOUT("ixgb_probe: begin"); - - pci_vendor_id = pci_get_vendor(dev); - if (pci_vendor_id != IXGB_VENDOR_ID) - return (ENXIO); - - pci_device_id = pci_get_device(dev); - pci_subvendor_id = pci_get_subvendor(dev); - pci_subdevice_id = pci_get_subdevice(dev); - - ent = ixgb_vendor_info_array; - while (ent->vendor_id != 0) { - if ((pci_vendor_id == ent->vendor_id) && - (pci_device_id == ent->device_id) && - - ((pci_subvendor_id == ent->subvendor_id) || - (ent->subvendor_id == PCI_ANY_ID)) && - - ((pci_subdevice_id == ent->subdevice_id) || - (ent->subdevice_id == PCI_ANY_ID))) { - sprintf(adapter_name, "%s, Version - %s", - ixgb_strings[ent->index], - ixgb_driver_version); - device_set_desc_copy(dev, adapter_name); - return (BUS_PROBE_DEFAULT); - } - ent++; - } - - return (ENXIO); -} - -/********************************************************************* - * Device initialization routine - * - * The attach entry point is called when the driver is being loaded. - * This routine identifies the type of hardware, allocates all resources - * and initializes the hardware. - * - * return 0 on success, positive on failure - *********************************************************************/ - -static int -ixgb_attach(device_t dev) -{ - struct adapter *adapter; - int tsize, rsize; - int error = 0; - - device_printf(dev, "%s\n", ixgb_copyright); - INIT_DEBUGOUT("ixgb_attach: begin"); - - /* Allocate, clear, and link in our adapter structure */ - if (!(adapter = device_get_softc(dev))) { - device_printf(dev, "adapter structure allocation failed\n"); - return (ENOMEM); - } - bzero(adapter, sizeof(struct adapter)); - adapter->dev = dev; - adapter->osdep.dev = dev; - IXGB_LOCK_INIT(adapter, device_get_nameunit(dev)); - - if (ixgb_adapter_list != NULL) - ixgb_adapter_list->prev = adapter; - adapter->next = ixgb_adapter_list; - ixgb_adapter_list = adapter; - - /* SYSCTL APIs */ - SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), - SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), - OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW, - (void *)adapter, 0, - ixgb_sysctl_stats, "I", "Statistics"); - - callout_init_mtx(&adapter->timer, &adapter->mtx, 0); - - /* Determine hardware revision */ - ixgb_identify_hardware(adapter); - - /* Parameters (to be read from user) */ - adapter->num_tx_desc = IXGB_MAX_TXD; - adapter->num_rx_desc = IXGB_MAX_RXD; - adapter->tx_int_delay = TIDV; - adapter->rx_int_delay = RDTR; - adapter->rx_buffer_len = IXGB_RXBUFFER_2048; - - adapter->hw.fc.high_water = FCRTH; - adapter->hw.fc.low_water = FCRTL; - adapter->hw.fc.pause_time = FCPAUSE; - adapter->hw.fc.send_xon = TRUE; - adapter->hw.fc.type = FLOW_CONTROL; - - - /* Set the max frame size assuming standard ethernet sized frames */ - adapter->hw.max_frame_size = - ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN; - - if (ixgb_allocate_pci_resources(adapter)) { - device_printf(dev, "Allocation of PCI resources failed\n"); - error = ENXIO; - goto err_pci; - } - tsize = IXGB_ROUNDUP(adapter->num_tx_desc * - sizeof(struct ixgb_tx_desc), 4096); - - /* Allocate Transmit Descriptor ring */ - if (ixgb_dma_malloc(adapter, tsize, &adapter->txdma, BUS_DMA_NOWAIT)) { - device_printf(dev, "Unable to allocate TxDescriptor memory\n"); - error = ENOMEM; - goto err_tx_desc; - } - adapter->tx_desc_base = (struct ixgb_tx_desc *) adapter->txdma.dma_vaddr; - - rsize = IXGB_ROUNDUP(adapter->num_rx_desc * - sizeof(struct ixgb_rx_desc), 4096); - - /* Allocate Receive Descriptor ring */ - if (ixgb_dma_malloc(adapter, rsize, &adapter->rxdma, BUS_DMA_NOWAIT)) { - device_printf(dev, "Unable to allocate rx_desc memory\n"); - error = ENOMEM; - goto err_rx_desc; - } - adapter->rx_desc_base = (struct ixgb_rx_desc *) adapter->rxdma.dma_vaddr; - - /* Allocate multicast array memory. */ - adapter->mta = malloc(sizeof(u_int8_t) * IXGB_ETH_LENGTH_OF_ADDRESS * - MAX_NUM_MULTICAST_ADDRESSES, M_DEVBUF, M_NOWAIT); - if (adapter->mta == NULL) { - device_printf(dev, "Can not allocate multicast setup array\n"); - error = ENOMEM; - goto err_hw_init; - } - - /* Initialize the hardware */ - if (ixgb_hardware_init(adapter)) { - device_printf(dev, "Unable to initialize the hardware\n"); - error = EIO; - goto err_hw_init; - } - /* Setup OS specific network interface */ - if (ixgb_setup_interface(dev, adapter) != 0) - goto err_hw_init; - - /* Initialize statistics */ - ixgb_clear_hw_cntrs(&adapter->hw); - ixgb_update_stats_counters(adapter); - - gone_in_dev(dev, 12, "ixgb(4) driver"); - INIT_DEBUGOUT("ixgb_attach: end"); - return (0); - -err_hw_init: - ixgb_dma_free(adapter, &adapter->rxdma); -err_rx_desc: - ixgb_dma_free(adapter, &adapter->txdma); -err_tx_desc: -err_pci: - if (adapter->ifp != NULL) - if_free(adapter->ifp); - ixgb_free_pci_resources(adapter); - sysctl_ctx_free(&adapter->sysctl_ctx); - free(adapter->mta, M_DEVBUF); - return (error); - -} - -/********************************************************************* - * Device removal routine - * - * The detach entry point is called when the driver is being removed. - * This routine stops the adapter and deallocates all the resources - * that were allocated for driver operation. - * - * return 0 on success, positive on failure - *********************************************************************/ - -static int -ixgb_detach(device_t dev) -{ - struct adapter *adapter = device_get_softc(dev); - struct ifnet *ifp = adapter->ifp; - - INIT_DEBUGOUT("ixgb_detach: begin"); - -#ifdef DEVICE_POLLING - if (ifp->if_capenable & IFCAP_POLLING) - ether_poll_deregister(ifp); -#endif - - IXGB_LOCK(adapter); - adapter->in_detach = 1; - - ixgb_stop(adapter); - IXGB_UNLOCK(adapter); - -#if __FreeBSD_version < 500000 - ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); -#else - ether_ifdetach(ifp); -#endif - callout_drain(&adapter->timer); - ixgb_free_pci_resources(adapter); -#if __FreeBSD_version >= 500000 - if_free(ifp); -#endif - - /* Free Transmit Descriptor ring */ - if (adapter->tx_desc_base) { - ixgb_dma_free(adapter, &adapter->txdma); - adapter->tx_desc_base = NULL; - } - /* Free Receive Descriptor ring */ - if (adapter->rx_desc_base) { - ixgb_dma_free(adapter, &adapter->rxdma); - adapter->rx_desc_base = NULL; - } - /* Remove from the adapter list */ - if (ixgb_adapter_list == adapter) - ixgb_adapter_list = adapter->next; - if (adapter->next != NULL) - adapter->next->prev = adapter->prev; - if (adapter->prev != NULL) - adapter->prev->next = adapter->next; - free(adapter->mta, M_DEVBUF); - - IXGB_LOCK_DESTROY(adapter); - return (0); -} - -/********************************************************************* - * - * Shutdown entry point - * - **********************************************************************/ - -static int -ixgb_shutdown(device_t dev) -{ - struct adapter *adapter = device_get_softc(dev); - IXGB_LOCK(adapter); - ixgb_stop(adapter); - IXGB_UNLOCK(adapter); - return (0); -} - - -/********************************************************************* - * Transmit entry point - * - * ixgb_start is called by the stack to initiate a transmit. - * The driver will remain in this routine as long as there are - * packets to transmit and transmit resources are available. - * In case resources are not available stack is notified and - * the packet is requeued. - **********************************************************************/ - -static void -ixgb_start_locked(struct ifnet * ifp) -{ - struct mbuf *m_head; - struct adapter *adapter = ifp->if_softc; - - IXGB_LOCK_ASSERT(adapter); - - if (!adapter->link_active) - return; - - while (ifp->if_snd.ifq_head != NULL) { - IF_DEQUEUE(&ifp->if_snd, m_head); - - if (m_head == NULL) - break; - - if (ixgb_encap(adapter, m_head)) { - ifp->if_drv_flags |= IFF_DRV_OACTIVE; - IF_PREPEND(&ifp->if_snd, m_head); - break; - } - /* Send a copy of the frame to the BPF listener */ -#if __FreeBSD_version < 500000 - if (ifp->if_bpf) - bpf_mtap(ifp, m_head); -#else - ETHER_BPF_MTAP(ifp, m_head); -#endif - /* Set timeout in case hardware has problems transmitting */ - adapter->tx_timer = IXGB_TX_TIMEOUT; - - } - return; -} - -static void -ixgb_start(struct ifnet *ifp) -{ - struct adapter *adapter = ifp->if_softc; - - IXGB_LOCK(adapter); - ixgb_start_locked(ifp); - IXGB_UNLOCK(adapter); - return; -} - -/********************************************************************* - * Ioctl entry point - * - * ixgb_ioctl is called when the user wants to configure the - * interface. - * - * return 0 on success, positive on failure - **********************************************************************/ - -static int -ixgb_ioctl(struct ifnet * ifp, IOCTL_CMD_TYPE command, caddr_t data) -{ - int mask, error = 0; - struct ifreq *ifr = (struct ifreq *) data; - struct adapter *adapter = ifp->if_softc; - - if (adapter->in_detach) - goto out; - - switch (command) { - case SIOCSIFMTU: - IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFMTU (Set Interface MTU)"); - if (ifr->ifr_mtu > IXGB_MAX_JUMBO_FRAME_SIZE - ETHER_HDR_LEN) { - error = EINVAL; - } else { - IXGB_LOCK(adapter); - ifp->if_mtu = ifr->ifr_mtu; - adapter->hw.max_frame_size = - ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; - - if (ifp->if_drv_flags & IFF_DRV_RUNNING) - ixgb_init_locked(adapter); - IXGB_UNLOCK(adapter); - } - break; - case SIOCSIFFLAGS: - IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFFLAGS (Set Interface Flags)"); - IXGB_LOCK(adapter); - if (ifp->if_flags & IFF_UP) { - if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { - ixgb_init_locked(adapter); - } - ixgb_disable_promisc(adapter); - ixgb_set_promisc(adapter); - } else { - if (ifp->if_drv_flags & IFF_DRV_RUNNING) { - ixgb_stop(adapter); - } - } - IXGB_UNLOCK(adapter); - break; - case SIOCADDMULTI: - case SIOCDELMULTI: - IOCTL_DEBUGOUT("ioctl rcv'd: SIOC(ADD|DEL)MULTI"); - if (ifp->if_drv_flags & IFF_DRV_RUNNING) { - IXGB_LOCK(adapter); - ixgb_disable_intr(adapter); - ixgb_set_multi(adapter); - ixgb_enable_intr(adapter); - IXGB_UNLOCK(adapter); - } - break; - case SIOCSIFMEDIA: - case SIOCGIFMEDIA: - IOCTL_DEBUGOUT("ioctl rcv'd: SIOCxIFMEDIA (Get/Set Interface Media)"); - error = ifmedia_ioctl(ifp, ifr, &adapter->media, command); - break; - case SIOCSIFCAP: - IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFCAP (Set Capabilities)"); - mask = ifr->ifr_reqcap ^ ifp->if_capenable; -#ifdef DEVICE_POLLING - if (mask & IFCAP_POLLING) { - if (ifr->ifr_reqcap & IFCAP_POLLING) { - error = ether_poll_register(ixgb_poll, ifp); - if (error) - return(error); - IXGB_LOCK(adapter); - ixgb_disable_intr(adapter); - ifp->if_capenable |= IFCAP_POLLING; - IXGB_UNLOCK(adapter); - } else { - error = ether_poll_deregister(ifp); - /* Enable interrupt even in error case */ - IXGB_LOCK(adapter); - ixgb_enable_intr(adapter); - ifp->if_capenable &= ~IFCAP_POLLING; - IXGB_UNLOCK(adapter); - } - } -#endif /* DEVICE_POLLING */ - if (mask & IFCAP_HWCSUM) { - if (IFCAP_HWCSUM & ifp->if_capenable) - ifp->if_capenable &= ~IFCAP_HWCSUM; - else - ifp->if_capenable |= IFCAP_HWCSUM; - if (ifp->if_drv_flags & IFF_DRV_RUNNING) - ixgb_init(adapter); - } - break; - default: - error = ether_ioctl(ifp, command, data); - break; - } - -out: - return (error); -} - -/********************************************************************* - * Watchdog entry point - * - * This routine is called whenever hardware quits transmitting. - * - **********************************************************************/ - -static void -ixgb_watchdog(struct adapter *adapter) -{ - struct ifnet *ifp; - - ifp = adapter->ifp; - - /* - * If we are in this routine because of pause frames, then don't - * reset the hardware. - */ - if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_TXOFF) { - adapter->tx_timer = IXGB_TX_TIMEOUT; - return; - } - if_printf(ifp, "watchdog timeout -- resetting\n"); - - ixgb_stop(adapter); - ixgb_init_locked(adapter); - - - if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); - - return; -} - -/********************************************************************* - * Init entry point - * - * This routine is used in two ways. It is used by the stack as - * init entry point in network interface structure. It is also used - * by the driver as a hw/sw initialization routine to get to a - * consistent state. - * - * return 0 on success, positive on failure - **********************************************************************/ - -static void -ixgb_init_locked(struct adapter *adapter) -{ - struct ifnet *ifp; - - INIT_DEBUGOUT("ixgb_init: begin"); - - IXGB_LOCK_ASSERT(adapter); - - ixgb_stop(adapter); - ifp = adapter->ifp; - - /* Get the latest mac address, User can use a LAA */ - bcopy(IF_LLADDR(ifp), adapter->hw.curr_mac_addr, - IXGB_ETH_LENGTH_OF_ADDRESS); - - /* Initialize the hardware */ - if (ixgb_hardware_init(adapter)) { - if_printf(ifp, "Unable to initialize the hardware\n"); - return; - } - ixgb_enable_vlans(adapter); - - /* Prepare transmit descriptors and buffers */ - if (ixgb_setup_transmit_structures(adapter)) { - if_printf(ifp, "Could not setup transmit structures\n"); - ixgb_stop(adapter); - return; - } - ixgb_initialize_transmit_unit(adapter); - - /* Setup Multicast table */ - ixgb_set_multi(adapter); - - /* Prepare receive descriptors and buffers */ - if (ixgb_setup_receive_structures(adapter)) { - if_printf(ifp, "Could not setup receive structures\n"); - ixgb_stop(adapter); - return; - } - ixgb_initialize_receive_unit(adapter); - - /* Don't lose promiscuous settings */ - ixgb_set_promisc(adapter); - - ifp = adapter->ifp; - ifp->if_drv_flags |= IFF_DRV_RUNNING; - ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; - - - if (ifp->if_capenable & IFCAP_TXCSUM) - ifp->if_hwassist = IXGB_CHECKSUM_FEATURES; - else - ifp->if_hwassist = 0; - - - /* Enable jumbo frames */ - if (ifp->if_mtu > ETHERMTU) { - uint32_t temp_reg; - IXGB_WRITE_REG(&adapter->hw, MFS, - adapter->hw.max_frame_size << IXGB_MFS_SHIFT); - temp_reg = IXGB_READ_REG(&adapter->hw, CTRL0); - temp_reg |= IXGB_CTRL0_JFE; - IXGB_WRITE_REG(&adapter->hw, CTRL0, temp_reg); - } - callout_reset(&adapter->timer, hz, ixgb_local_timer, adapter); - ixgb_clear_hw_cntrs(&adapter->hw); -#ifdef DEVICE_POLLING - /* - * Only disable interrupts if we are polling, make sure they are on - * otherwise. - */ - if (ifp->if_capenable & IFCAP_POLLING) - ixgb_disable_intr(adapter); - else -#endif - ixgb_enable_intr(adapter); - - return; -} - -static void -ixgb_init(void *arg) -{ - struct adapter *adapter = arg; - - IXGB_LOCK(adapter); - ixgb_init_locked(adapter); - IXGB_UNLOCK(adapter); - return; -} - -#ifdef DEVICE_POLLING -static int -ixgb_poll_locked(struct ifnet * ifp, enum poll_cmd cmd, int count) -{ - struct adapter *adapter = ifp->if_softc; - u_int32_t reg_icr; - int rx_npkts; - - IXGB_LOCK_ASSERT(adapter); - - if (cmd == POLL_AND_CHECK_STATUS) { - reg_icr = IXGB_READ_REG(&adapter->hw, ICR); - if (reg_icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)) { - ixgb_check_for_link(&adapter->hw); - ixgb_print_link_status(adapter); - } - } - rx_npkts = ixgb_process_receive_interrupts(adapter, count); - ixgb_clean_transmit_interrupts(adapter); - - if (ifp->if_snd.ifq_head != NULL) - ixgb_start_locked(ifp); - return (rx_npkts); -} - -static int -ixgb_poll(struct ifnet * ifp, enum poll_cmd cmd, int count) -{ - struct adapter *adapter = ifp->if_softc; - int rx_npkts = 0; - - IXGB_LOCK(adapter); - if (ifp->if_drv_flags & IFF_DRV_RUNNING) - rx_npkts = ixgb_poll_locked(ifp, cmd, count); - IXGB_UNLOCK(adapter); - return (rx_npkts); -} -#endif /* DEVICE_POLLING */ - -/********************************************************************* - * - * Interrupt Service routine - * - **********************************************************************/ - -static void -ixgb_intr(void *arg) -{ - u_int32_t loop_cnt = IXGB_MAX_INTR; - u_int32_t reg_icr; - struct ifnet *ifp; - struct adapter *adapter = arg; - boolean_t rxdmt0 = FALSE; - - IXGB_LOCK(adapter); - - ifp = adapter->ifp; - -#ifdef DEVICE_POLLING - if (ifp->if_capenable & IFCAP_POLLING) { - IXGB_UNLOCK(adapter); - return; - } -#endif - - reg_icr = IXGB_READ_REG(&adapter->hw, ICR); - if (reg_icr == 0) { - IXGB_UNLOCK(adapter); - return; - } - - if (reg_icr & IXGB_INT_RXDMT0) - rxdmt0 = TRUE; - -#ifdef _SV_ - if (reg_icr & IXGB_INT_RXDMT0) - adapter->sv_stats.icr_rxdmt0++; - if (reg_icr & IXGB_INT_RXO) - adapter->sv_stats.icr_rxo++; - if (reg_icr & IXGB_INT_RXT0) - adapter->sv_stats.icr_rxt0++; - if (reg_icr & IXGB_INT_TXDW) - adapter->sv_stats.icr_TXDW++; -#endif /* _SV_ */ - - /* Link status change */ - if (reg_icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)) { - ixgb_check_for_link(&adapter->hw); - ixgb_print_link_status(adapter); - } - while (loop_cnt > 0) { - if (ifp->if_drv_flags & IFF_DRV_RUNNING) { - ixgb_process_receive_interrupts(adapter, -1); - ixgb_clean_transmit_interrupts(adapter); - } - loop_cnt--; - } - - if (rxdmt0 && adapter->raidc) { - IXGB_WRITE_REG(&adapter->hw, IMC, IXGB_INT_RXDMT0); - IXGB_WRITE_REG(&adapter->hw, IMS, IXGB_INT_RXDMT0); - } - if (ifp->if_drv_flags & IFF_DRV_RUNNING && ifp->if_snd.ifq_head != NULL) - ixgb_start_locked(ifp); - - IXGB_UNLOCK(adapter); - return; -} - - -/********************************************************************* - * - * Media Ioctl callback - * - * This routine is called whenever the user queries the status of - * the interface using ifconfig. - * - **********************************************************************/ -static void -ixgb_media_status(struct ifnet * ifp, struct ifmediareq * ifmr) -{ - struct adapter *adapter = ifp->if_softc; - - INIT_DEBUGOUT("ixgb_media_status: begin"); - - ixgb_check_for_link(&adapter->hw); - ixgb_print_link_status(adapter); - - ifmr->ifm_status = IFM_AVALID; - ifmr->ifm_active = IFM_ETHER; - - if (!adapter->hw.link_up) - return; - - ifmr->ifm_status |= IFM_ACTIVE; - ifmr->ifm_active |= IFM_1000_SX | IFM_FDX; - - return; -} - -/********************************************************************* - * - * Media Ioctl callback - * - * This routine is called when the user changes speed/duplex using - * media/mediopt option with ifconfig. - * - **********************************************************************/ -static int -ixgb_media_change(struct ifnet * ifp) -{ - struct adapter *adapter = ifp->if_softc; - struct ifmedia *ifm = &adapter->media; - - INIT_DEBUGOUT("ixgb_media_change: begin"); - - if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) - return (EINVAL); - - return (0); -} - -/********************************************************************* - * - * This routine maps the mbufs to tx descriptors. - * - * return 0 on success, positive on failure - **********************************************************************/ - -static int -ixgb_encap(struct adapter * adapter, struct mbuf * m_head) -{ - u_int8_t txd_popts; - int i, j, error, nsegs; - -#if __FreeBSD_version < 500000 - struct ifvlan *ifv = NULL; -#endif - bus_dma_segment_t segs[IXGB_MAX_SCATTER]; - bus_dmamap_t map; - struct ixgb_buffer *tx_buffer = NULL; - struct ixgb_tx_desc *current_tx_desc = NULL; - struct ifnet *ifp = adapter->ifp; - - /* - * Force a cleanup if number of TX descriptors available hits the - * threshold - */ - if (adapter->num_tx_desc_avail <= IXGB_TX_CLEANUP_THRESHOLD) { - ixgb_clean_transmit_interrupts(adapter); - } - if (adapter->num_tx_desc_avail <= IXGB_TX_CLEANUP_THRESHOLD) { - adapter->no_tx_desc_avail1++; - return (ENOBUFS); - } - /* - * Map the packet for DMA. - */ - if (bus_dmamap_create(adapter->txtag, BUS_DMA_NOWAIT, &map)) { - adapter->no_tx_map_avail++; - return (ENOMEM); - } - error = bus_dmamap_load_mbuf_sg(adapter->txtag, map, m_head, segs, - &nsegs, BUS_DMA_NOWAIT); - if (error != 0) { - adapter->no_tx_dma_setup++; - if_printf(ifp, "ixgb_encap: bus_dmamap_load_mbuf failed; " - "error %u\n", error); - bus_dmamap_destroy(adapter->txtag, map); - return (error); - } - KASSERT(nsegs != 0, ("ixgb_encap: empty packet")); - - if (nsegs > adapter->num_tx_desc_avail) { - adapter->no_tx_desc_avail2++; - bus_dmamap_destroy(adapter->txtag, map); - return (ENOBUFS); - } - if (ifp->if_hwassist > 0) { - ixgb_transmit_checksum_setup(adapter, m_head, - &txd_popts); - } else - txd_popts = 0; - - /* Find out if we are in vlan mode */ -#if __FreeBSD_version < 500000 - if ((m_head->m_flags & (M_PROTO1 | M_PKTHDR)) == (M_PROTO1 | M_PKTHDR) && - m_head->m_pkthdr.rcvif != NULL && - m_head->m_pkthdr.rcvif->if_type == IFT_L2VLAN) - ifv = m_head->m_pkthdr.rcvif->if_softc; -#elseif __FreeBSD_version < 700000 - mtag = VLAN_OUTPUT_TAG(ifp, m_head); -#endif - i = adapter->next_avail_tx_desc; - for (j = 0; j < nsegs; j++) { - tx_buffer = &adapter->tx_buffer_area[i]; - current_tx_desc = &adapter->tx_desc_base[i]; - - current_tx_desc->buff_addr = htole64(segs[j].ds_addr); - current_tx_desc->cmd_type_len = (adapter->txd_cmd | segs[j].ds_len); - current_tx_desc->popts = txd_popts; - if (++i == adapter->num_tx_desc) - i = 0; - - tx_buffer->m_head = NULL; - } - - adapter->num_tx_desc_avail -= nsegs; - adapter->next_avail_tx_desc = i; - -#if __FreeBSD_version < 500000 - if (ifv != NULL) { - /* Set the vlan id */ - current_tx_desc->vlan = ifv->ifv_tag; -#elseif __FreeBSD_version < 700000 - if (mtag != NULL) { - /* Set the vlan id */ - current_tx_desc->vlan = VLAN_TAG_VALUE(mtag); -#else - if (m_head->m_flags & M_VLANTAG) { - current_tx_desc->vlan = m_head->m_pkthdr.ether_vtag; -#endif - - /* Tell hardware to add tag */ - current_tx_desc->cmd_type_len |= IXGB_TX_DESC_CMD_VLE; - } - tx_buffer->m_head = m_head; - tx_buffer->map = map; - bus_dmamap_sync(adapter->txtag, map, BUS_DMASYNC_PREWRITE); - - /* - * Last Descriptor of Packet needs End Of Packet (EOP) - */ - current_tx_desc->cmd_type_len |= (IXGB_TX_DESC_CMD_EOP); - - /* - * Advance the Transmit Descriptor Tail (Tdt), this tells the E1000 - * that this frame is available to transmit. - */ - IXGB_WRITE_REG(&adapter->hw, TDT, i); - - return (0); -} - -static void -ixgb_set_promisc(struct adapter * adapter) -{ - - u_int32_t reg_rctl; - struct ifnet *ifp = adapter->ifp; - - reg_rctl = IXGB_READ_REG(&adapter->hw, RCTL); - - if (ifp->if_flags & IFF_PROMISC) { - reg_rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE); - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl); - } else if (ifp->if_flags & IFF_ALLMULTI) { - reg_rctl |= IXGB_RCTL_MPE; - reg_rctl &= ~IXGB_RCTL_UPE; - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl); - } - return; -} - -static void -ixgb_disable_promisc(struct adapter * adapter) -{ - u_int32_t reg_rctl; - - reg_rctl = IXGB_READ_REG(&adapter->hw, RCTL); - - reg_rctl &= (~IXGB_RCTL_UPE); - reg_rctl &= (~IXGB_RCTL_MPE); - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl); - - return; -} - - -/********************************************************************* - * Multicast Update - * - * This routine is called whenever multicast address list is updated. - * - **********************************************************************/ - -static void -ixgb_set_multi(struct adapter * adapter) -{ - u_int32_t reg_rctl = 0; - u_int8_t *mta; - struct ifmultiaddr *ifma; - int mcnt = 0; - struct ifnet *ifp = adapter->ifp; - - IOCTL_DEBUGOUT("ixgb_set_multi: begin"); - - mta = adapter->mta; - bzero(mta, sizeof(u_int8_t) * IXGB_ETH_LENGTH_OF_ADDRESS * - MAX_NUM_MULTICAST_ADDRESSES); - - if_maddr_rlock(ifp); -#if __FreeBSD_version < 500000 - LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { -#else - TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { -#endif - if (ifma->ifma_addr->sa_family != AF_LINK) - continue; - - bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), - &mta[mcnt * IXGB_ETH_LENGTH_OF_ADDRESS], IXGB_ETH_LENGTH_OF_ADDRESS); - mcnt++; - } - if_maddr_runlock(ifp); - - if (mcnt > MAX_NUM_MULTICAST_ADDRESSES) { - reg_rctl = IXGB_READ_REG(&adapter->hw, RCTL); - reg_rctl |= IXGB_RCTL_MPE; - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl); - } else - ixgb_mc_addr_list_update(&adapter->hw, mta, mcnt, 0); - - return; -} - - -/********************************************************************* - * Timer routine - * - * This routine checks for link status and updates statistics. - * - **********************************************************************/ - -static void -ixgb_local_timer(void *arg) -{ - struct ifnet *ifp; - struct adapter *adapter = arg; - ifp = adapter->ifp; - - IXGB_LOCK_ASSERT(adapter); - - ixgb_check_for_link(&adapter->hw); - ixgb_print_link_status(adapter); - ixgb_update_stats_counters(adapter); - if (ixgb_display_debug_stats && ifp->if_drv_flags & IFF_DRV_RUNNING) { - ixgb_print_hw_stats(adapter); - } - if (adapter->tx_timer != 0 && --adapter->tx_timer == 0) - ixgb_watchdog(adapter); - callout_reset(&adapter->timer, hz, ixgb_local_timer, adapter); -} - -static void -ixgb_print_link_status(struct adapter * adapter) -{ - if (adapter->hw.link_up) { - if (!adapter->link_active) { - if_printf(adapter->ifp, "Link is up %d Mbps %s \n", - 10000, - "Full Duplex"); - adapter->link_active = 1; - } - } else { - if (adapter->link_active) { - if_printf(adapter->ifp, "Link is Down \n"); - adapter->link_active = 0; - } - } - - return; -} - - - -/********************************************************************* - * - * This routine disables all traffic on the adapter by issuing a - * global reset on the MAC and deallocates TX/RX buffers. - * - **********************************************************************/ - -static void -ixgb_stop(void *arg) -{ - struct ifnet *ifp; - struct adapter *adapter = arg; - ifp = adapter->ifp; - - IXGB_LOCK_ASSERT(adapter); - - INIT_DEBUGOUT("ixgb_stop: begin\n"); - ixgb_disable_intr(adapter); - adapter->hw.adapter_stopped = FALSE; - ixgb_adapter_stop(&adapter->hw); - callout_stop(&adapter->timer); - ixgb_free_transmit_structures(adapter); - ixgb_free_receive_structures(adapter); - - /* Tell the stack that the interface is no longer active */ - ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); - adapter->tx_timer = 0; - - return; -} - - -/********************************************************************* - * - * Determine hardware revision. - * - **********************************************************************/ -static void -ixgb_identify_hardware(struct adapter * adapter) -{ - device_t dev = adapter->dev; - - /* Make sure our PCI config space has the necessary stuff set */ - pci_enable_busmaster(dev); - adapter->hw.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2); - - /* Save off the information about this board */ - adapter->hw.vendor_id = pci_get_vendor(dev); - adapter->hw.device_id = pci_get_device(dev); - adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1); - adapter->hw.subsystem_vendor_id = pci_read_config(dev, PCIR_SUBVEND_0, 2); - adapter->hw.subsystem_id = pci_read_config(dev, PCIR_SUBDEV_0, 2); - - /* Set MacType, etc. based on this PCI info */ - switch (adapter->hw.device_id) { - case IXGB_DEVICE_ID_82597EX: - case IXGB_DEVICE_ID_82597EX_SR: - adapter->hw.mac_type = ixgb_82597; - break; - default: - INIT_DEBUGOUT1("Unknown device if 0x%x", adapter->hw.device_id); - device_printf(dev, "unsupported device id 0x%x\n", - adapter->hw.device_id); - } - - return; -} - -static int -ixgb_allocate_pci_resources(struct adapter * adapter) -{ - int rid; - device_t dev = adapter->dev; - - rid = IXGB_MMBA; - adapter->res_memory = bus_alloc_resource_any(dev, SYS_RES_MEMORY, - &rid, - RF_ACTIVE); - if (!(adapter->res_memory)) { - device_printf(dev, "Unable to allocate bus resource: memory\n"); - return (ENXIO); - } - adapter->osdep.mem_bus_space_tag = - rman_get_bustag(adapter->res_memory); - adapter->osdep.mem_bus_space_handle = - rman_get_bushandle(adapter->res_memory); - adapter->hw.hw_addr = (uint8_t *) & adapter->osdep.mem_bus_space_handle; - - rid = 0x0; - adapter->res_interrupt = bus_alloc_resource_any(dev, SYS_RES_IRQ, - &rid, - RF_SHAREABLE | RF_ACTIVE); - if (!(adapter->res_interrupt)) { - device_printf(dev, - "Unable to allocate bus resource: interrupt\n"); - return (ENXIO); - } - if (bus_setup_intr(dev, adapter->res_interrupt, - INTR_TYPE_NET | INTR_MPSAFE, - NULL, (void (*) (void *))ixgb_intr, adapter, - &adapter->int_handler_tag)) { - device_printf(dev, "Error registering interrupt handler!\n"); - return (ENXIO); - } - adapter->hw.back = &adapter->osdep; - - return (0); -} - -static void -ixgb_free_pci_resources(struct adapter * adapter) -{ - device_t dev = adapter->dev; - - if (adapter->res_interrupt != NULL) { - bus_teardown_intr(dev, adapter->res_interrupt, - adapter->int_handler_tag); - bus_release_resource(dev, SYS_RES_IRQ, 0, - adapter->res_interrupt); - } - if (adapter->res_memory != NULL) { - bus_release_resource(dev, SYS_RES_MEMORY, IXGB_MMBA, - adapter->res_memory); - } - if (adapter->res_ioport != NULL) { - bus_release_resource(dev, SYS_RES_IOPORT, adapter->io_rid, - adapter->res_ioport); - } - return; -} - -/********************************************************************* - * - * Initialize the hardware to a configuration as specified by the - * adapter structure. The controller is reset, the EEPROM is - * verified, the MAC address is set, then the shared initialization - * routines are called. - * - **********************************************************************/ -static int -ixgb_hardware_init(struct adapter * adapter) -{ - /* Issue a global reset */ - adapter->hw.adapter_stopped = FALSE; - ixgb_adapter_stop(&adapter->hw); - - /* Make sure we have a good EEPROM before we read from it */ - if (!ixgb_validate_eeprom_checksum(&adapter->hw)) { - device_printf(adapter->dev, - "The EEPROM Checksum Is Not Valid\n"); - return (EIO); - } - if (!ixgb_init_hw(&adapter->hw)) { - device_printf(adapter->dev, "Hardware Initialization Failed"); - return (EIO); - } - - return (0); -} - -/********************************************************************* - * - * Setup networking device structure and register an interface. - * - **********************************************************************/ -static int -ixgb_setup_interface(device_t dev, struct adapter * adapter) -{ - struct ifnet *ifp; - INIT_DEBUGOUT("ixgb_setup_interface: begin"); - - ifp = adapter->ifp = if_alloc(IFT_ETHER); - if (ifp == NULL) { - device_printf(dev, "can not allocate ifnet structure\n"); - return (-1); - } -#if __FreeBSD_version >= 502000 - if_initname(ifp, device_get_name(dev), device_get_unit(dev)); -#else - ifp->if_unit = device_get_unit(dev); - ifp->if_name = "ixgb"; -#endif - ifp->if_baudrate = 1000000000; - ifp->if_init = ixgb_init; - ifp->if_softc = adapter; - ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; - ifp->if_ioctl = ixgb_ioctl; - ifp->if_start = ixgb_start; - ifp->if_get_counter = ixgb_get_counter; - ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 1; - -#if __FreeBSD_version < 500000 - ether_ifattach(ifp, ETHER_BPF_SUPPORTED); -#else - ether_ifattach(ifp, adapter->hw.curr_mac_addr); -#endif - - ifp->if_capabilities = IFCAP_HWCSUM; - - /* - * Tell the upper layer(s) we support long frames. - */ - ifp->if_hdrlen = sizeof(struct ether_vlan_header); - -#if __FreeBSD_version >= 500000 - ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU; -#endif - - ifp->if_capenable = ifp->if_capabilities; - -#ifdef DEVICE_POLLING - ifp->if_capabilities |= IFCAP_POLLING; -#endif - - /* - * Specify the media types supported by this adapter and register - * callbacks to update media and link information - */ - ifmedia_init(&adapter->media, IFM_IMASK, ixgb_media_change, - ixgb_media_status); - ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX | IFM_FDX, - 0, NULL); - ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX, - 0, NULL); - ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL); - ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO); - - return (0); -} - -/******************************************************************** - * Manage DMA'able memory. - *******************************************************************/ -static void -ixgb_dmamap_cb(void *arg, bus_dma_segment_t * segs, int nseg, int error) -{ - if (error) - return; - *(bus_addr_t *) arg = segs->ds_addr; - return; -} - -static int -ixgb_dma_malloc(struct adapter * adapter, bus_size_t size, - struct ixgb_dma_alloc * dma, int mapflags) -{ - device_t dev; - int r; - - dev = adapter->dev; - r = bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */ - PAGE_SIZE, 0, /* alignment, bounds */ - BUS_SPACE_MAXADDR, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - size, /* maxsize */ - 1, /* nsegments */ - size, /* maxsegsize */ - BUS_DMA_ALLOCNOW, /* flags */ -#if __FreeBSD_version >= 502000 - NULL, /* lockfunc */ - NULL, /* lockfuncarg */ -#endif - &dma->dma_tag); - if (r != 0) { - device_printf(dev, "ixgb_dma_malloc: bus_dma_tag_create failed; " - "error %u\n", r); - goto fail_0; - } - r = bus_dmamem_alloc(dma->dma_tag, (void **)&dma->dma_vaddr, - BUS_DMA_NOWAIT, &dma->dma_map); - if (r != 0) { - device_printf(dev, "ixgb_dma_malloc: bus_dmamem_alloc failed; " - "error %u\n", r); - goto fail_1; - } - r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, - size, - ixgb_dmamap_cb, - &dma->dma_paddr, - mapflags | BUS_DMA_NOWAIT); - if (r != 0) { - device_printf(dev, "ixgb_dma_malloc: bus_dmamap_load failed; " - "error %u\n", r); - goto fail_2; - } - dma->dma_size = size; - return (0); -fail_2: - bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); -fail_1: - bus_dma_tag_destroy(dma->dma_tag); -fail_0: - dma->dma_tag = NULL; - return (r); -} - - - -static void -ixgb_dma_free(struct adapter * adapter, struct ixgb_dma_alloc * dma) -{ - bus_dmamap_unload(dma->dma_tag, dma->dma_map); - bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); - bus_dma_tag_destroy(dma->dma_tag); -} - -/********************************************************************* - * - * Allocate memory for tx_buffer structures. The tx_buffer stores all - * the information needed to transmit a packet on the wire. - * - **********************************************************************/ -static int -ixgb_allocate_transmit_structures(struct adapter * adapter) -{ - if (!(adapter->tx_buffer_area = - (struct ixgb_buffer *) malloc(sizeof(struct ixgb_buffer) * - adapter->num_tx_desc, M_DEVBUF, - M_NOWAIT | M_ZERO))) { - device_printf(adapter->dev, - "Unable to allocate tx_buffer memory\n"); - return ENOMEM; - } - bzero(adapter->tx_buffer_area, - sizeof(struct ixgb_buffer) * adapter->num_tx_desc); - - return 0; -} - -/********************************************************************* - * - * Allocate and initialize transmit structures. - * - **********************************************************************/ -static int -ixgb_setup_transmit_structures(struct adapter * adapter) -{ - /* - * Setup DMA descriptor areas. - */ - if (bus_dma_tag_create(bus_get_dma_tag(adapter->dev), /* parent */ - PAGE_SIZE, 0, /* alignment, bounds */ - BUS_SPACE_MAXADDR, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - MCLBYTES * IXGB_MAX_SCATTER, /* maxsize */ - IXGB_MAX_SCATTER, /* nsegments */ - MCLBYTES, /* maxsegsize */ - BUS_DMA_ALLOCNOW, /* flags */ -#if __FreeBSD_version >= 502000 - NULL, /* lockfunc */ - NULL, /* lockfuncarg */ -#endif - &adapter->txtag)) { - device_printf(adapter->dev, "Unable to allocate TX DMA tag\n"); - return (ENOMEM); - } - if (ixgb_allocate_transmit_structures(adapter)) - return ENOMEM; - - bzero((void *)adapter->tx_desc_base, - (sizeof(struct ixgb_tx_desc)) * adapter->num_tx_desc); - - adapter->next_avail_tx_desc = 0; - adapter->oldest_used_tx_desc = 0; - - /* Set number of descriptors available */ - adapter->num_tx_desc_avail = adapter->num_tx_desc; - - /* Set checksum context */ - adapter->active_checksum_context = OFFLOAD_NONE; - - return 0; -} - -/********************************************************************* - * - * Enable transmit unit. - * - **********************************************************************/ -static void -ixgb_initialize_transmit_unit(struct adapter * adapter) -{ - u_int32_t reg_tctl; - u_int64_t tdba = adapter->txdma.dma_paddr; - - /* Setup the Base and Length of the Tx Descriptor Ring */ - IXGB_WRITE_REG(&adapter->hw, TDBAL, - (tdba & 0x00000000ffffffffULL)); - IXGB_WRITE_REG(&adapter->hw, TDBAH, (tdba >> 32)); - IXGB_WRITE_REG(&adapter->hw, TDLEN, - adapter->num_tx_desc * - sizeof(struct ixgb_tx_desc)); - - /* Setup the HW Tx Head and Tail descriptor pointers */ - IXGB_WRITE_REG(&adapter->hw, TDH, 0); - IXGB_WRITE_REG(&adapter->hw, TDT, 0); - - - HW_DEBUGOUT2("Base = %x, Length = %x\n", - IXGB_READ_REG(&adapter->hw, TDBAL), - IXGB_READ_REG(&adapter->hw, TDLEN)); - - IXGB_WRITE_REG(&adapter->hw, TIDV, adapter->tx_int_delay); - - - /* Program the Transmit Control Register */ - reg_tctl = IXGB_READ_REG(&adapter->hw, TCTL); - reg_tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE; - IXGB_WRITE_REG(&adapter->hw, TCTL, reg_tctl); - - /* Setup Transmit Descriptor Settings for this adapter */ - adapter->txd_cmd = IXGB_TX_DESC_TYPE | IXGB_TX_DESC_CMD_RS; - - if (adapter->tx_int_delay > 0) - adapter->txd_cmd |= IXGB_TX_DESC_CMD_IDE; - return; -} - -/********************************************************************* - * - * Free all transmit related data structures. - * - **********************************************************************/ -static void -ixgb_free_transmit_structures(struct adapter * adapter) -{ - struct ixgb_buffer *tx_buffer; - int i; - - INIT_DEBUGOUT("free_transmit_structures: begin"); - - if (adapter->tx_buffer_area != NULL) { - tx_buffer = adapter->tx_buffer_area; - for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) { - if (tx_buffer->m_head != NULL) { - bus_dmamap_unload(adapter->txtag, tx_buffer->map); - bus_dmamap_destroy(adapter->txtag, tx_buffer->map); - m_freem(tx_buffer->m_head); - } - tx_buffer->m_head = NULL; - } - } - if (adapter->tx_buffer_area != NULL) { - free(adapter->tx_buffer_area, M_DEVBUF); - adapter->tx_buffer_area = NULL; - } - if (adapter->txtag != NULL) { - bus_dma_tag_destroy(adapter->txtag); - adapter->txtag = NULL; - } - return; -} - -/********************************************************************* - * - * The offload context needs to be set when we transfer the first - * packet of a particular protocol (TCP/UDP). We change the - * context only if the protocol type changes. - * - **********************************************************************/ -static void -ixgb_transmit_checksum_setup(struct adapter * adapter, - struct mbuf * mp, - u_int8_t * txd_popts) -{ - struct ixgb_context_desc *TXD; - struct ixgb_buffer *tx_buffer; - int curr_txd; - - if (mp->m_pkthdr.csum_flags) { - - if (mp->m_pkthdr.csum_flags & CSUM_TCP) { - *txd_popts = IXGB_TX_DESC_POPTS_TXSM; - if (adapter->active_checksum_context == OFFLOAD_TCP_IP) - return; - else - adapter->active_checksum_context = OFFLOAD_TCP_IP; - } else if (mp->m_pkthdr.csum_flags & CSUM_UDP) { - *txd_popts = IXGB_TX_DESC_POPTS_TXSM; - if (adapter->active_checksum_context == OFFLOAD_UDP_IP) - return; - else - adapter->active_checksum_context = OFFLOAD_UDP_IP; - } else { - *txd_popts = 0; - return; - } - } else { - *txd_popts = 0; - return; - } - - /* - * If we reach this point, the checksum offload context needs to be - * reset. - */ - curr_txd = adapter->next_avail_tx_desc; - tx_buffer = &adapter->tx_buffer_area[curr_txd]; - TXD = (struct ixgb_context_desc *) & adapter->tx_desc_base[curr_txd]; - - - TXD->tucss = ENET_HEADER_SIZE + sizeof(struct ip); - TXD->tucse = 0; - - TXD->mss = 0; - - if (adapter->active_checksum_context == OFFLOAD_TCP_IP) { - TXD->tucso = - ENET_HEADER_SIZE + sizeof(struct ip) + - offsetof(struct tcphdr, th_sum); - } else if (adapter->active_checksum_context == OFFLOAD_UDP_IP) { - TXD->tucso = - ENET_HEADER_SIZE + sizeof(struct ip) + - offsetof(struct udphdr, uh_sum); - } - TXD->cmd_type_len = IXGB_CONTEXT_DESC_CMD_TCP | IXGB_TX_DESC_CMD_RS | IXGB_CONTEXT_DESC_CMD_IDE; - - tx_buffer->m_head = NULL; - - if (++curr_txd == adapter->num_tx_desc) - curr_txd = 0; - - adapter->num_tx_desc_avail--; - adapter->next_avail_tx_desc = curr_txd; - return; -} - -/********************************************************************** - * - * Examine each tx_buffer in the used queue. If the hardware is done - * processing the packet then free associated resources. The - * tx_buffer is put back on the free queue. - * - **********************************************************************/ -static void -ixgb_clean_transmit_interrupts(struct adapter * adapter) -{ - int i, num_avail; - struct ixgb_buffer *tx_buffer; - struct ixgb_tx_desc *tx_desc; - - IXGB_LOCK_ASSERT(adapter); - - if (adapter->num_tx_desc_avail == adapter->num_tx_desc) - return; - -#ifdef _SV_ - adapter->clean_tx_interrupts++; -#endif - num_avail = adapter->num_tx_desc_avail; - i = adapter->oldest_used_tx_desc; - - tx_buffer = &adapter->tx_buffer_area[i]; - tx_desc = &adapter->tx_desc_base[i]; - - while (tx_desc->status & IXGB_TX_DESC_STATUS_DD) { - - tx_desc->status = 0; - num_avail++; - - if (tx_buffer->m_head) { - bus_dmamap_sync(adapter->txtag, tx_buffer->map, - BUS_DMASYNC_POSTWRITE); - bus_dmamap_unload(adapter->txtag, tx_buffer->map); - bus_dmamap_destroy(adapter->txtag, tx_buffer->map); - m_freem(tx_buffer->m_head); - tx_buffer->m_head = NULL; - } - if (++i == adapter->num_tx_desc) - i = 0; - - tx_buffer = &adapter->tx_buffer_area[i]; - tx_desc = &adapter->tx_desc_base[i]; - } - - adapter->oldest_used_tx_desc = i; - - /* - * If we have enough room, clear IFF_DRV_OACTIVE to tell the stack that - * it is OK to send packets. If there are no pending descriptors, - * clear the timeout. Otherwise, if some descriptors have been freed, - * restart the timeout. - */ - if (num_avail > IXGB_TX_CLEANUP_THRESHOLD) { - struct ifnet *ifp = adapter->ifp; - - ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; - if (num_avail == adapter->num_tx_desc) - adapter->tx_timer = 0; - else if (num_avail == adapter->num_tx_desc_avail) - adapter->tx_timer = IXGB_TX_TIMEOUT; - } - adapter->num_tx_desc_avail = num_avail; - return; -} - - -/********************************************************************* - * - * Get a buffer from system mbuf buffer pool. - * - **********************************************************************/ -static int -ixgb_get_buf(int i, struct adapter * adapter, - struct mbuf * nmp) -{ - struct mbuf *mp = nmp; - struct ixgb_buffer *rx_buffer; - struct ifnet *ifp; - bus_addr_t paddr; - int error; - - ifp = adapter->ifp; - - if (mp == NULL) { - - mp = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); - - if (mp == NULL) { - adapter->mbuf_alloc_failed++; - return (ENOBUFS); - } - mp->m_len = mp->m_pkthdr.len = MCLBYTES; - } else { - mp->m_len = mp->m_pkthdr.len = MCLBYTES; - mp->m_data = mp->m_ext.ext_buf; - mp->m_next = NULL; - } - - if (ifp->if_mtu <= ETHERMTU) { - m_adj(mp, ETHER_ALIGN); - } - rx_buffer = &adapter->rx_buffer_area[i]; - - /* - * Using memory from the mbuf cluster pool, invoke the bus_dma - * machinery to arrange the memory mapping. - */ - error = bus_dmamap_load(adapter->rxtag, rx_buffer->map, - mtod(mp, void *), mp->m_len, - ixgb_dmamap_cb, &paddr, 0); - if (error) { - m_free(mp); - return (error); - } - rx_buffer->m_head = mp; - adapter->rx_desc_base[i].buff_addr = htole64(paddr); - bus_dmamap_sync(adapter->rxtag, rx_buffer->map, BUS_DMASYNC_PREREAD); - - return (0); -} - -/********************************************************************* - * - * Allocate memory for rx_buffer structures. Since we use one - * rx_buffer per received packet, the maximum number of rx_buffer's - * that we'll need is equal to the number of receive descriptors - * that we've allocated. - * - **********************************************************************/ -static int -ixgb_allocate_receive_structures(struct adapter * adapter) -{ - int i, error; - struct ixgb_buffer *rx_buffer; - - if (!(adapter->rx_buffer_area = - (struct ixgb_buffer *) malloc(sizeof(struct ixgb_buffer) * - adapter->num_rx_desc, M_DEVBUF, - M_NOWAIT | M_ZERO))) { - device_printf(adapter->dev, - "Unable to allocate rx_buffer memory\n"); - return (ENOMEM); - } - bzero(adapter->rx_buffer_area, - sizeof(struct ixgb_buffer) * adapter->num_rx_desc); - - error = bus_dma_tag_create(bus_get_dma_tag(adapter->dev),/* parent */ - PAGE_SIZE, 0, /* alignment, bounds */ - BUS_SPACE_MAXADDR, /* lowaddr */ - BUS_SPACE_MAXADDR, /* highaddr */ - NULL, NULL, /* filter, filterarg */ - MCLBYTES, /* maxsize */ - 1, /* nsegments */ - MCLBYTES, /* maxsegsize */ - BUS_DMA_ALLOCNOW, /* flags */ -#if __FreeBSD_version >= 502000 - NULL, /* lockfunc */ - NULL, /* lockfuncarg */ -#endif - &adapter->rxtag); - if (error != 0) { - device_printf(adapter->dev, "ixgb_allocate_receive_structures: " - "bus_dma_tag_create failed; error %u\n", - error); - goto fail_0; - } - rx_buffer = adapter->rx_buffer_area; - for (i = 0; i < adapter->num_rx_desc; i++, rx_buffer++) { - error = bus_dmamap_create(adapter->rxtag, BUS_DMA_NOWAIT, - &rx_buffer->map); - if (error != 0) { - device_printf(adapter->dev, - "ixgb_allocate_receive_structures: " - "bus_dmamap_create failed; error %u\n", - error); - goto fail_1; - } - } - - for (i = 0; i < adapter->num_rx_desc; i++) { - if (ixgb_get_buf(i, adapter, NULL) == ENOBUFS) { - adapter->rx_buffer_area[i].m_head = NULL; - adapter->rx_desc_base[i].buff_addr = 0; - return (ENOBUFS); - } - } - - return (0); -fail_1: - bus_dma_tag_destroy(adapter->rxtag); -fail_0: - adapter->rxtag = NULL; - free(adapter->rx_buffer_area, M_DEVBUF); - adapter->rx_buffer_area = NULL; - return (error); -} - -/********************************************************************* - * - * Allocate and initialize receive structures. - * - **********************************************************************/ -static int -ixgb_setup_receive_structures(struct adapter * adapter) -{ - bzero((void *)adapter->rx_desc_base, - (sizeof(struct ixgb_rx_desc)) * adapter->num_rx_desc); - - if (ixgb_allocate_receive_structures(adapter)) - return ENOMEM; - - /* Setup our descriptor pointers */ - adapter->next_rx_desc_to_check = 0; - adapter->next_rx_desc_to_use = 0; - return (0); -} - -/********************************************************************* - * - * Enable receive unit. - * - **********************************************************************/ -static void -ixgb_initialize_receive_unit(struct adapter * adapter) -{ - u_int32_t reg_rctl; - u_int32_t reg_rxcsum; - u_int32_t reg_rxdctl; - struct ifnet *ifp; - u_int64_t rdba = adapter->rxdma.dma_paddr; - - ifp = adapter->ifp; - - /* - * Make sure receives are disabled while setting up the descriptor - * ring - */ - reg_rctl = IXGB_READ_REG(&adapter->hw, RCTL); - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl & ~IXGB_RCTL_RXEN); - - /* Set the Receive Delay Timer Register */ - IXGB_WRITE_REG(&adapter->hw, RDTR, - adapter->rx_int_delay); - - - /* Setup the Base and Length of the Rx Descriptor Ring */ - IXGB_WRITE_REG(&adapter->hw, RDBAL, - (rdba & 0x00000000ffffffffULL)); - IXGB_WRITE_REG(&adapter->hw, RDBAH, (rdba >> 32)); - IXGB_WRITE_REG(&adapter->hw, RDLEN, adapter->num_rx_desc * - sizeof(struct ixgb_rx_desc)); - - /* Setup the HW Rx Head and Tail Descriptor Pointers */ - IXGB_WRITE_REG(&adapter->hw, RDH, 0); - - IXGB_WRITE_REG(&adapter->hw, RDT, adapter->num_rx_desc - 1); - - - - reg_rxdctl = RXDCTL_WTHRESH_DEFAULT << IXGB_RXDCTL_WTHRESH_SHIFT - | RXDCTL_HTHRESH_DEFAULT << IXGB_RXDCTL_HTHRESH_SHIFT - | RXDCTL_PTHRESH_DEFAULT << IXGB_RXDCTL_PTHRESH_SHIFT; - IXGB_WRITE_REG(&adapter->hw, RXDCTL, reg_rxdctl); - - - adapter->raidc = 1; - if (adapter->raidc) { - uint32_t raidc; - uint8_t poll_threshold; -#define IXGB_RAIDC_POLL_DEFAULT 120 - - poll_threshold = ((adapter->num_rx_desc - 1) >> 3); - poll_threshold >>= 1; - poll_threshold &= 0x3F; - raidc = IXGB_RAIDC_EN | IXGB_RAIDC_RXT_GATE | - (IXGB_RAIDC_POLL_DEFAULT << IXGB_RAIDC_POLL_SHIFT) | - (adapter->rx_int_delay << IXGB_RAIDC_DELAY_SHIFT) | - poll_threshold; - IXGB_WRITE_REG(&adapter->hw, RAIDC, raidc); - } - /* Enable Receive Checksum Offload for TCP and UDP ? */ - if (ifp->if_capenable & IFCAP_RXCSUM) { - reg_rxcsum = IXGB_READ_REG(&adapter->hw, RXCSUM); - reg_rxcsum |= IXGB_RXCSUM_TUOFL; - IXGB_WRITE_REG(&adapter->hw, RXCSUM, reg_rxcsum); - } - /* Setup the Receive Control Register */ - reg_rctl = IXGB_READ_REG(&adapter->hw, RCTL); - reg_rctl &= ~(3 << IXGB_RCTL_MO_SHIFT); - reg_rctl |= IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 | IXGB_RCTL_SECRC | - IXGB_RCTL_CFF | - (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT); - - switch (adapter->rx_buffer_len) { - default: - case IXGB_RXBUFFER_2048: - reg_rctl |= IXGB_RCTL_BSIZE_2048; - break; - case IXGB_RXBUFFER_4096: - reg_rctl |= IXGB_RCTL_BSIZE_4096; - break; - case IXGB_RXBUFFER_8192: - reg_rctl |= IXGB_RCTL_BSIZE_8192; - break; - case IXGB_RXBUFFER_16384: - reg_rctl |= IXGB_RCTL_BSIZE_16384; - break; - } - - reg_rctl |= IXGB_RCTL_RXEN; - - - /* Enable Receives */ - IXGB_WRITE_REG(&adapter->hw, RCTL, reg_rctl); - - return; -} - -/********************************************************************* - * - * Free receive related data structures. - * - **********************************************************************/ -static void -ixgb_free_receive_structures(struct adapter * adapter) -{ - struct ixgb_buffer *rx_buffer; - int i; - - INIT_DEBUGOUT("free_receive_structures: begin"); - - if (adapter->rx_buffer_area != NULL) { - rx_buffer = adapter->rx_buffer_area; - for (i = 0; i < adapter->num_rx_desc; i++, rx_buffer++) { - if (rx_buffer->map != NULL) { - bus_dmamap_unload(adapter->rxtag, rx_buffer->map); - bus_dmamap_destroy(adapter->rxtag, rx_buffer->map); - } - if (rx_buffer->m_head != NULL) - m_freem(rx_buffer->m_head); - rx_buffer->m_head = NULL; - } - } - if (adapter->rx_buffer_area != NULL) { - free(adapter->rx_buffer_area, M_DEVBUF); - adapter->rx_buffer_area = NULL; - } - if (adapter->rxtag != NULL) { - bus_dma_tag_destroy(adapter->rxtag); - adapter->rxtag = NULL; - } - return; -} - -/********************************************************************* - * - * This routine executes in interrupt context. It replenishes - * the mbufs in the descriptor and sends data which has been - * dma'ed into host memory to upper layer. - * - * We loop at most count times if count is > 0, or until done if - * count < 0. - * - *********************************************************************/ -static int -ixgb_process_receive_interrupts(struct adapter * adapter, int count) -{ - struct ifnet *ifp; - struct mbuf *mp; -#if __FreeBSD_version < 500000 - struct ether_header *eh; -#endif - int eop = 0; - int len; - u_int8_t accept_frame = 0; - int i; - int next_to_use = 0; - int eop_desc; - int rx_npkts = 0; - /* Pointer to the receive descriptor being examined. */ - struct ixgb_rx_desc *current_desc; - - IXGB_LOCK_ASSERT(adapter); - - ifp = adapter->ifp; - i = adapter->next_rx_desc_to_check; - next_to_use = adapter->next_rx_desc_to_use; - eop_desc = adapter->next_rx_desc_to_check; - current_desc = &adapter->rx_desc_base[i]; - - if (!((current_desc->status) & IXGB_RX_DESC_STATUS_DD)) { -#ifdef _SV_ - adapter->no_pkts_avail++; -#endif - return (rx_npkts); - } - while ((current_desc->status & IXGB_RX_DESC_STATUS_DD) && (count != 0)) { - - mp = adapter->rx_buffer_area[i].m_head; - bus_dmamap_sync(adapter->rxtag, adapter->rx_buffer_area[i].map, - BUS_DMASYNC_POSTREAD); - accept_frame = 1; - if (current_desc->status & IXGB_RX_DESC_STATUS_EOP) { - count--; - eop = 1; - } else { - eop = 0; - } - len = current_desc->length; - - if (current_desc->errors & (IXGB_RX_DESC_ERRORS_CE | - IXGB_RX_DESC_ERRORS_SE | IXGB_RX_DESC_ERRORS_P | - IXGB_RX_DESC_ERRORS_RXE)) { - accept_frame = 0; - } - if (accept_frame) { - - /* Assign correct length to the current fragment */ - mp->m_len = len; - - if (adapter->fmp == NULL) { - mp->m_pkthdr.len = len; - adapter->fmp = mp; /* Store the first mbuf */ - adapter->lmp = mp; - } else { - /* Chain mbuf's together */ - mp->m_flags &= ~M_PKTHDR; - adapter->lmp->m_next = mp; - adapter->lmp = adapter->lmp->m_next; - adapter->fmp->m_pkthdr.len += len; - } - - if (eop) { - eop_desc = i; - adapter->fmp->m_pkthdr.rcvif = ifp; - -#if __FreeBSD_version < 500000 - eh = mtod(adapter->fmp, struct ether_header *); - - /* Remove ethernet header from mbuf */ - m_adj(adapter->fmp, sizeof(struct ether_header)); - ixgb_receive_checksum(adapter, current_desc, - adapter->fmp); - - if (current_desc->status & IXGB_RX_DESC_STATUS_VP) - VLAN_INPUT_TAG(eh, adapter->fmp, - current_desc->special); - else - ether_input(ifp, eh, adapter->fmp); -#else - ixgb_receive_checksum(adapter, current_desc, - adapter->fmp); -#if __FreeBSD_version < 700000 - if (current_desc->status & IXGB_RX_DESC_STATUS_VP) - VLAN_INPUT_TAG(ifp, adapter->fmp, - current_desc->special); -#else - if (current_desc->status & IXGB_RX_DESC_STATUS_VP) { - adapter->fmp->m_pkthdr.ether_vtag = - current_desc->special; - adapter->fmp->m_flags |= M_VLANTAG; - } -#endif - - if (adapter->fmp != NULL) { - IXGB_UNLOCK(adapter); - (*ifp->if_input) (ifp, adapter->fmp); - IXGB_LOCK(adapter); - rx_npkts++; - } -#endif - adapter->fmp = NULL; - adapter->lmp = NULL; - } - adapter->rx_buffer_area[i].m_head = NULL; - } else { - adapter->dropped_pkts++; - if (adapter->fmp != NULL) - m_freem(adapter->fmp); - adapter->fmp = NULL; - adapter->lmp = NULL; - } - - /* Zero out the receive descriptors status */ - current_desc->status = 0; - - /* Advance our pointers to the next descriptor */ - if (++i == adapter->num_rx_desc) { - i = 0; - current_desc = adapter->rx_desc_base; - } else - current_desc++; - } - adapter->next_rx_desc_to_check = i; - - if (--i < 0) - i = (adapter->num_rx_desc - 1); - - /* - * 82597EX: Workaround for redundent write back in receive descriptor ring (causes - * memory corruption). Avoid using and re-submitting the most recently received RX - * descriptor back to hardware. - * - * if(Last written back descriptor == EOP bit set descriptor) - * then avoid re-submitting the most recently received RX descriptor - * back to hardware. - * if(Last written back descriptor != EOP bit set descriptor) - * then avoid re-submitting the most recently received RX descriptors - * till last EOP bit set descriptor. - */ - if (eop_desc != i) { - if (++eop_desc == adapter->num_rx_desc) - eop_desc = 0; - i = eop_desc; - } - /* Replenish the descriptors with new mbufs till last EOP bit set descriptor */ - while (next_to_use != i) { - current_desc = &adapter->rx_desc_base[next_to_use]; - if ((current_desc->errors & (IXGB_RX_DESC_ERRORS_CE | - IXGB_RX_DESC_ERRORS_SE | IXGB_RX_DESC_ERRORS_P | - IXGB_RX_DESC_ERRORS_RXE))) { - mp = adapter->rx_buffer_area[next_to_use].m_head; - ixgb_get_buf(next_to_use, adapter, mp); - } else { - if (ixgb_get_buf(next_to_use, adapter, NULL) == ENOBUFS) - break; - } - /* Advance our pointers to the next descriptor */ - if (++next_to_use == adapter->num_rx_desc) { - next_to_use = 0; - current_desc = adapter->rx_desc_base; - } else - current_desc++; - } - adapter->next_rx_desc_to_use = next_to_use; - if (--next_to_use < 0) - next_to_use = (adapter->num_rx_desc - 1); - /* Advance the IXGB's Receive Queue #0 "Tail Pointer" */ - IXGB_WRITE_REG(&adapter->hw, RDT, next_to_use); - - return (rx_npkts); -} - -/********************************************************************* - * - * Verify that the hardware indicated that the checksum is valid. - * Inform the stack about the status of checksum so that stack - * doesn't spend time verifying the checksum. - * - *********************************************************************/ -static void -ixgb_receive_checksum(struct adapter * adapter, - struct ixgb_rx_desc * rx_desc, - struct mbuf * mp) -{ - if (rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) { - mp->m_pkthdr.csum_flags = 0; - return; - } - if (rx_desc->status & IXGB_RX_DESC_STATUS_IPCS) { - /* Did it pass? */ - if (!(rx_desc->errors & IXGB_RX_DESC_ERRORS_IPE)) { - /* IP Checksum Good */ - mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED; - mp->m_pkthdr.csum_flags |= CSUM_IP_VALID; - - } else { - mp->m_pkthdr.csum_flags = 0; - } - } - if (rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS) { - /* Did it pass? */ - if (!(rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE)) { - mp->m_pkthdr.csum_flags |= - (CSUM_DATA_VALID | CSUM_PSEUDO_HDR); - mp->m_pkthdr.csum_data = htons(0xffff); - } - } - return; -} - - -static void -ixgb_enable_vlans(struct adapter * adapter) -{ - uint32_t ctrl; - - ctrl = IXGB_READ_REG(&adapter->hw, CTRL0); - ctrl |= IXGB_CTRL0_VME; - IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl); - - return; -} - - -static void -ixgb_enable_intr(struct adapter * adapter) -{ - IXGB_WRITE_REG(&adapter->hw, IMS, (IXGB_INT_RXT0 | IXGB_INT_TXDW | - IXGB_INT_RXDMT0 | IXGB_INT_LSC | IXGB_INT_RXO)); - return; -} - -static void -ixgb_disable_intr(struct adapter * adapter) -{ - IXGB_WRITE_REG(&adapter->hw, IMC, ~0); - return; -} - -void -ixgb_write_pci_cfg(struct ixgb_hw * hw, - uint32_t reg, - uint16_t * value) -{ - pci_write_config(((struct ixgb_osdep *) hw->back)->dev, reg, - *value, 2); -} - -/********************************************************************** - * - * Update the board statistics counters. - * - **********************************************************************/ -static void -ixgb_update_stats_counters(struct adapter * adapter) -{ - - adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS); - adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); - adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); - adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL); - adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH); - adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); - adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); - adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); - adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); - adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC); - - adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC); - adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC); - adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC); - adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC); - adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC); - adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC); - adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC); - adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL); - adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH); - adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL); - adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH); - adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC); - adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC); - adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC); - adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL); - adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH); - adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL); - adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH); - adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); - adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); - adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL); - adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH); - adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C); - adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL); - adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH); - adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL); - adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH); - - adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); - adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); - adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); - adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH); - adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL); - adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH); - adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC); - adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC); - adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC); - adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL); - adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH); - adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL); - adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH); - adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL); - adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH); - adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC); - adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC); - adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC); - adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC); - adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC); - adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC); - adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC); -} - -static uint64_t -ixgb_get_counter(struct ifnet *ifp, ift_counter cnt) -{ - struct adapter *adapter; - - adapter = if_getsoftc(ifp); - - switch (cnt) { - case IFCOUNTER_IPACKETS: - return (adapter->stats.gprcl); - case IFCOUNTER_OPACKETS: - return ( adapter->stats.gptcl); - case IFCOUNTER_IBYTES: - return (adapter->stats.gorcl); - case IFCOUNTER_OBYTES: - return (adapter->stats.gotcl); - case IFCOUNTER_IMCASTS: - return ( adapter->stats.mprcl); - case IFCOUNTER_COLLISIONS: - return (0); - case IFCOUNTER_IERRORS: - return (adapter->dropped_pkts + adapter->stats.crcerrs + - adapter->stats.rnbc + adapter->stats.mpc + - adapter->stats.rlec); - default: - return (if_get_counter_default(ifp, cnt)); - } -} - -/********************************************************************** - * - * This routine is called only when ixgb_display_debug_stats is enabled. - * This routine provides a way to take a look at important statistics - * maintained by the driver and hardware. - * - **********************************************************************/ -static void -ixgb_print_hw_stats(struct adapter * adapter) -{ - char buf_speed[100], buf_type[100]; - ixgb_bus_speed bus_speed; - ixgb_bus_type bus_type; - device_t dev; - - dev = adapter->dev; -#ifdef _SV_ - device_printf(dev, "Packets not Avail = %ld\n", - adapter->no_pkts_avail); - device_printf(dev, "CleanTxInterrupts = %ld\n", - adapter->clean_tx_interrupts); - device_printf(dev, "ICR RXDMT0 = %lld\n", - (long long)adapter->sv_stats.icr_rxdmt0); - device_printf(dev, "ICR RXO = %lld\n", - (long long)adapter->sv_stats.icr_rxo); - device_printf(dev, "ICR RXT0 = %lld\n", - (long long)adapter->sv_stats.icr_rxt0); - device_printf(dev, "ICR TXDW = %lld\n", - (long long)adapter->sv_stats.icr_TXDW); -#endif /* _SV_ */ - - bus_speed = adapter->hw.bus.speed; - bus_type = adapter->hw.bus.type; - sprintf(buf_speed, - bus_speed == ixgb_bus_speed_33 ? "33MHz" : - bus_speed == ixgb_bus_speed_66 ? "66MHz" : - bus_speed == ixgb_bus_speed_100 ? "100MHz" : - bus_speed == ixgb_bus_speed_133 ? "133MHz" : - "UNKNOWN"); - device_printf(dev, "PCI_Bus_Speed = %s\n", - buf_speed); - - sprintf(buf_type, - bus_type == ixgb_bus_type_pci ? "PCI" : - bus_type == ixgb_bus_type_pcix ? "PCI-X" : - "UNKNOWN"); - device_printf(dev, "PCI_Bus_Type = %s\n", - buf_type); - - device_printf(dev, "Tx Descriptors not Avail1 = %ld\n", - adapter->no_tx_desc_avail1); - device_printf(dev, "Tx Descriptors not Avail2 = %ld\n", - adapter->no_tx_desc_avail2); - device_printf(dev, "Std Mbuf Failed = %ld\n", - adapter->mbuf_alloc_failed); - device_printf(dev, "Std Cluster Failed = %ld\n", - adapter->mbuf_cluster_failed); - - device_printf(dev, "Defer count = %lld\n", - (long long)adapter->stats.dc); - device_printf(dev, "Missed Packets = %lld\n", - (long long)adapter->stats.mpc); - device_printf(dev, "Receive No Buffers = %lld\n", - (long long)adapter->stats.rnbc); - device_printf(dev, "Receive length errors = %lld\n", - (long long)adapter->stats.rlec); - device_printf(dev, "Crc errors = %lld\n", - (long long)adapter->stats.crcerrs); - device_printf(dev, "Driver dropped packets = %ld\n", - adapter->dropped_pkts); - - device_printf(dev, "XON Rcvd = %lld\n", - (long long)adapter->stats.xonrxc); - device_printf(dev, "XON Xmtd = %lld\n", - (long long)adapter->stats.xontxc); - device_printf(dev, "XOFF Rcvd = %lld\n", - (long long)adapter->stats.xoffrxc); - device_printf(dev, "XOFF Xmtd = %lld\n", - (long long)adapter->stats.xofftxc); - - device_printf(dev, "Good Packets Rcvd = %lld\n", - (long long)adapter->stats.gprcl); - device_printf(dev, "Good Packets Xmtd = %lld\n", - (long long)adapter->stats.gptcl); - - device_printf(dev, "Jumbo frames recvd = %lld\n", - (long long)adapter->stats.jprcl); - device_printf(dev, "Jumbo frames Xmtd = %lld\n", - (long long)adapter->stats.jptcl); - - return; - -} - -static int -ixgb_sysctl_stats(SYSCTL_HANDLER_ARGS) -{ - int error; - int result; - struct adapter *adapter; - - result = -1; - error = sysctl_handle_int(oidp, &result, 0, req); - - if (error || !req->newptr) - return (error); - - if (result == 1) { - adapter = (struct adapter *) arg1; - ixgb_print_hw_stats(adapter); - } - return error; -} diff --git a/sys/dev/ixgb/if_ixgb.h b/sys/dev/ixgb/if_ixgb.h deleted file mode 100644 index 8c03e98f12fd..000000000000 --- a/sys/dev/ixgb/if_ixgb.h +++ /dev/null @@ -1,384 +0,0 @@ -/******************************************************************************* -SPDX-License-Identifier: BSD-3-Clause - -Copyright (c) 2001-2004, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -***************************************************************************/ -/*$FreeBSD$*/ - -#ifndef _IXGB_H_DEFINED_ -#define _IXGB_H_DEFINED_ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#if __FreeBSD_version >= 502000 -#include -#include -#else -#include -#include -#endif -#include -#include -#include - -#include -#include -#include - -/* Tunables */ - -/* - * TxDescriptors Valid Range: 64-4096 Default Value: 256 This value is the - * number of transmit descriptors allocated by the driver. Increasing this - * value allows the driver to queue more transmits. Each descriptor is 16 - * bytes. - */ -#define IXGB_MAX_TXD 256 - -/* - * RxDescriptors Valid Range: 64-4096 Default Value: 1024 This value is the - * number of receive descriptors allocated by the driver. Increasing this - * value allows the driver to buffer more incoming packets. Each descriptor - * is 16 bytes. A receive buffer is also allocated for each descriptor. The - * maximum MTU size is 16110. - * - */ -#define IXGB_MAX_RXD 1024 - -/* - * TxIntDelay Valid Range: 0-65535 (0=off) Default Value: 32 This value - * delays the generation of transmit interrupts in units of 1.024 - * microseconds. Transmit interrupt reduction can improve CPU efficiency if - * properly tuned for specific network traffic. If the system is reporting - * dropped transmits, this value may be set too high causing the driver to - * run out of available transmit descriptors. - */ -#define TIDV 32 - -/* - * RxIntDelay Valid Range: 0-65535 (0=off) Default Value: 72 This value - * delays the generation of receive interrupts in units of 1.024 - * microseconds. Receive interrupt reduction can improve CPU efficiency if - * properly tuned for specific network traffic. Increasing this value adds - * extra latency to frame reception and can end up decreasing the throughput - * of TCP traffic. If the system is reporting dropped receives, this value - * may be set too high, causing the driver to run out of available receive - * descriptors. - * - */ -#define RDTR 72 - - -/* - * This parameter controls the maximum no of times the driver will loop in - * the isr. Minimum Value = 1 - */ -#define IXGB_MAX_INTR 3 - - -/* - * Inform the stack about transmit checksum offload capabilities. - */ -#define IXGB_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP) - -/* - * This parameter controls the duration of transmit watchdog timer. - */ -#define IXGB_TX_TIMEOUT 5 /* set to 5 seconds */ - -/* - * This parameter controls when the driver calls the routine to reclaim - * transmit descriptors. - */ -#define IXGB_TX_CLEANUP_THRESHOLD IXGB_MAX_TXD / 8 - -/* - * Flow Control Types. - * 1. ixgb_fc_none - Flow Control Disabled - * 2. ixgb_fc_rx_pause - Flow Control Receive Only - * 3. ixgb_fc_tx_pause - Flow Control Transmit Only - * 4. ixgb_fc_full - Flow Control Enabled - */ -#define FLOW_CONTROL_NONE ixgb_fc_none -#define FLOW_CONTROL_RX_PAUSE ixgb_fc_rx_pause -#define FLOW_CONTROL_TX_PAUSE ixgb_fc_tx_pause -#define FLOW_CONTROL_FULL ixgb_fc_full - -/* - * Set the flow control type. Assign one of the above flow control types to be enabled. - * Default Value: FLOW_CONTROL_FULL - */ -#define FLOW_CONTROL FLOW_CONTROL_FULL - -/* - * Receive Flow control low threshold (when we send a resume frame) (FCRTL) - * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity) must be - * less than high threshold by at least 8 bytes Default Value: 163,840 - * (0x28000) - */ -#define FCRTL 0x28000 - -/* - * Receive Flow control high threshold (when we send a pause frame) (FCRTH) - * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity) Default - * Value: 196,608 (0x30000) - */ -#define FCRTH 0x30000 - -/* - * Flow control request timeout (how long to pause the link partner's tx) - * (PAP 15:0) Valid Range: 1 - 65535 Default Value: 256 (0x100) - */ -#define FCPAUSE 0x100 - -/* Tunables -- End */ - - -#define IXGB_VENDOR_ID 0x8086 -#define IXGB_MMBA 0x0010 /* Mem base address */ -#define IXGB_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1)) - -#define IOCTL_CMD_TYPE u_long -#define MAX_NUM_MULTICAST_ADDRESSES 128 -#define PCI_ANY_ID (~0U) -#define ETHER_ALIGN 2 - -/* Defines for printing debug information */ -#define DEBUG_INIT 0 -#define DEBUG_IOCTL 0 -#define DEBUG_HW 0 -#define _SV_ 0 - -#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") -#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) -#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) -#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") -#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) -#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) -#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") -#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) -#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) - - -/* Supported RX Buffer Sizes */ -#define IXGB_RXBUFFER_2048 2048 -#define IXGB_RXBUFFER_4096 4096 -#define IXGB_RXBUFFER_8192 8192 -#define IXGB_RXBUFFER_16384 16384 - -#define IXGB_MAX_SCATTER 100 - -/* - * ****************************************************************************** - * vendor_info_array - * - * This array contains the list of Subvendor/Subdevice IDs on which the driver - * should load. - * -***************************************************************************** - */ -typedef struct _ixgb_vendor_info_t { - unsigned int vendor_id; - unsigned int device_id; - unsigned int subvendor_id; - unsigned int subdevice_id; - unsigned int index; -} ixgb_vendor_info_t; - - -struct ixgb_buffer { - struct mbuf *m_head; - bus_dmamap_t map; /* bus_dma map for packet */ -}; - -/* - * Bus dma allocation structure used by ixgb_dma_malloc and ixgb_dma_free. - */ -struct ixgb_dma_alloc { - bus_addr_t dma_paddr; - caddr_t dma_vaddr; - bus_dma_tag_t dma_tag; - bus_dmamap_t dma_map; - bus_dma_segment_t dma_seg; - bus_size_t dma_size; - int dma_nseg; -}; - -typedef enum _XSUM_CONTEXT_T { - OFFLOAD_NONE, - OFFLOAD_TCP_IP, - OFFLOAD_UDP_IP -} XSUM_CONTEXT_T; - -/* Our adapter structure */ -struct adapter { - struct ifnet *ifp; - struct adapter *next; - struct adapter *prev; - struct ixgb_hw hw; - - /* FreeBSD operating-system-specific structures */ - struct ixgb_osdep osdep; - device_t dev; - struct resource *res_memory; - struct resource *res_ioport; - struct resource *res_interrupt; - void *int_handler_tag; - struct ifmedia media; - struct callout timer; - int io_rid; - int tx_timer; - struct mtx mtx; - - /* Info about the board itself */ - u_int32_t part_num; - u_int8_t link_active; - u_int16_t link_speed; - u_int16_t link_duplex; - u_int32_t tx_int_delay; - u_int32_t tx_abs_int_delay; - u_int32_t rx_int_delay; - u_int32_t rx_abs_int_delay; - - int raidc; - - XSUM_CONTEXT_T active_checksum_context; - - /* - * Transmit definitions - * - * We have an array of num_tx_desc descriptors (handled by the - * controller) paired with an array of tx_buffers (at - * tx_buffer_area). The index of the next available descriptor is - * next_avail_tx_desc. The number of remaining tx_desc is - * num_tx_desc_avail. - */ - struct ixgb_dma_alloc txdma; /* bus_dma glue for tx desc */ - struct ixgb_tx_desc *tx_desc_base; - u_int32_t next_avail_tx_desc; - u_int32_t oldest_used_tx_desc; - volatile u_int16_t num_tx_desc_avail; - u_int16_t num_tx_desc; - u_int32_t txd_cmd; - struct ixgb_buffer *tx_buffer_area; - bus_dma_tag_t txtag; /* dma tag for tx */ - - /* - * Receive definitions - * - * we have an array of num_rx_desc rx_desc (handled by the controller), - * and paired with an array of rx_buffers (at rx_buffer_area). The - * next pair to check on receive is at offset next_rx_desc_to_check - */ - struct ixgb_dma_alloc rxdma; /* bus_dma glue for rx desc */ - struct ixgb_rx_desc *rx_desc_base; - u_int32_t next_rx_desc_to_check; - u_int16_t num_rx_desc; - u_int32_t rx_buffer_len; - struct ixgb_buffer *rx_buffer_area; - bus_dma_tag_t rxtag; /* dma tag for Rx */ - u_int32_t next_rx_desc_to_use; - - - /* Jumbo frame */ - struct mbuf *fmp; - struct mbuf *lmp; - - struct sysctl_ctx_list sysctl_ctx; - struct sysctl_oid *sysctl_tree; - - /* Multicast array memory */ - u_int8_t *mta; - /* Misc stats maintained by the driver */ - unsigned long dropped_pkts; - unsigned long mbuf_alloc_failed; - unsigned long mbuf_cluster_failed; - unsigned long no_tx_desc_avail1; - unsigned long no_tx_desc_avail2; - unsigned long no_tx_map_avail; - unsigned long no_tx_dma_setup; - - boolean_t in_detach; - - /* Board specific private data */ -#ifdef _SV_ - struct ixgb_sv_stats { - uint64_t icr_rxdmt0; - uint64_t icr_rxo; - uint64_t icr_rxt0; - uint64_t icr_TXDW; - } sv_stats; - unsigned long no_pkts_avail; - unsigned long clean_tx_interrupts; -#endif - - struct ixgb_hw_stats stats; -}; - -#define IXGB_LOCK_INIT(_sc, _name) \ - mtx_init(&(_sc)->mtx, _name, MTX_NETWORK_LOCK, MTX_DEF) -#define IXGB_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->mtx) -#define IXGB_LOCK(_sc) mtx_lock(&(_sc)->mtx) -#define IXGB_UNLOCK(_sc) mtx_unlock(&(_sc)->mtx) -#define IXGB_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->mtx, MA_OWNED) - -#endif /* _IXGB_H_DEFINED_ */ diff --git a/sys/dev/ixgb/if_ixgb_osdep.h b/sys/dev/ixgb/if_ixgb_osdep.h deleted file mode 100644 index 7c806ead235d..000000000000 --- a/sys/dev/ixgb/if_ixgb_osdep.h +++ /dev/null @@ -1,121 +0,0 @@ -/******************************************************************************* -SPDX-License-Identifier: BSD-3-Clause - -Copyright (c) 2001-2004, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -***************************************************************************/ - -/*$FreeBSD$*/ - -#ifndef _FREEBSD_OS_H_ -#define _FREEBSD_OS_H_ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if __FreeBSD_version >= 502000 - #include - #include -#else - #include - #include -#endif - -#define ASSERT(x) if(!(x)) panic("IXGB: x") - -/* The happy-fun DELAY macro is defined in /usr/src/sys/i386/include/clock.h */ -#define usec_delay(x) DELAY(x) -#define msec_delay(x) DELAY(1000*(x)) - -#define DBG 0 -#define MSGOUT(S, A, B) printf(S "\n", A, B) -#define DEBUGFUNC(F) DEBUGOUT(F); -#if DBG - #define DEBUGOUT(S) printf(S "\n") - #define DEBUGOUT1(S,A) printf(S "\n",A) - #define DEBUGOUT2(S,A,B) printf(S "\n",A,B) - #define DEBUGOUT3(S,A,B,C) printf(S "\n",A,B,C) - #define DEBUGOUT7(S,A,B,C,D,E,F,G) printf(S "\n",A,B,C,D,E,F,G) -#else - #define DEBUGOUT(S) - #define DEBUGOUT1(S,A) - #define DEBUGOUT2(S,A,B) - #define DEBUGOUT3(S,A,B,C) - #define DEBUGOUT7(S,A,B,C,D,E,F,G) -#endif - -#define FALSE 0 -#define TRUE 1 -#define CMD_MEM_WRT_INVALIDATE 0x0010 /* BIT_4 */ -#define PCI_COMMAND_REGISTER PCIR_COMMAND - -#define le16_to_cpu - -struct ixgb_osdep -{ - bus_space_tag_t mem_bus_space_tag; - bus_space_handle_t mem_bus_space_handle; - device_t dev; -}; - -#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS) - -#define IXGB_READ_REG(a, reg) (\ - bus_space_read_4( ((struct ixgb_osdep *)(a)->back)->mem_bus_space_tag, \ - ((struct ixgb_osdep *)(a)->back)->mem_bus_space_handle, \ - IXGB_##reg)) - -#define IXGB_WRITE_REG(a, reg, value) (\ - bus_space_write_4( ((struct ixgb_osdep *)(a)->back)->mem_bus_space_tag, \ - ((struct ixgb_osdep *)(a)->back)->mem_bus_space_handle, \ - IXGB_##reg, value)) - - -#define IXGB_READ_REG_ARRAY(a, reg, offset) (\ - bus_space_read_4( ((struct ixgb_osdep *)(a)->back)->mem_bus_space_tag, \ - ((struct ixgb_osdep *)(a)->back)->mem_bus_space_handle, \ - (IXGB_##reg + ((offset) << 2)))) - -#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) (\ - bus_space_write_4( ((struct ixgb_osdep *)(a)->back)->mem_bus_space_tag, \ - ((struct ixgb_osdep *)(a)->back)->mem_bus_space_handle, \ - (IXGB_##reg + ((offset) << 2)), value)) - -#endif /* _FREEBSD_OS_H_ */ - diff --git a/sys/dev/ixgb/ixgb_ee.c b/sys/dev/ixgb/ixgb_ee.c deleted file mode 100644 index 5e5169d0783c..000000000000 --- a/sys/dev/ixgb/ixgb_ee.c +++ /dev/null @@ -1,782 +0,0 @@ -/******************************************************************************* - SPDX-License-Identifier: BSD-3-Clause - - Copyright (c) 2001-2004, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/*$FreeBSD$*/ - -#include -#include - -/* Local prototypes */ -static uint16_t ixgb_shift_in_bits(struct ixgb_hw *hw); - -static void ixgb_shift_out_bits(struct ixgb_hw *hw, - uint16_t data, - uint16_t count); -static void ixgb_standby_eeprom(struct ixgb_hw *hw); - -static boolean_t ixgb_wait_eeprom_command(struct ixgb_hw *hw); - -static void ixgb_cleanup_eeprom(struct ixgb_hw *hw); - -/****************************************************************************** - * Raises the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd_reg - EECD's current value - *****************************************************************************/ -static void -ixgb_raise_clock(struct ixgb_hw *hw, - uint32_t *eecd_reg) -{ - /* Raise the clock input to the EEPROM (by setting the SK bit), and then - * wait 50 microseconds. - */ - *eecd_reg = *eecd_reg | IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, *eecd_reg); - usec_delay(50); - return; -} - -/****************************************************************************** - * Lowers the EEPROM's clock input. - * - * hw - Struct containing variables accessed by shared code - * eecd_reg - EECD's current value - *****************************************************************************/ -static void -ixgb_lower_clock(struct ixgb_hw *hw, - uint32_t *eecd_reg) -{ - /* Lower the clock input to the EEPROM (by clearing the SK bit), and then - * wait 50 microseconds. - */ - *eecd_reg = *eecd_reg & ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, *eecd_reg); - usec_delay(50); - return; -} - -/****************************************************************************** - * Shift data bits out to the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * data - data to send to the EEPROM - * count - number of bits to shift out - *****************************************************************************/ -static void -ixgb_shift_out_bits(struct ixgb_hw *hw, - uint16_t data, - uint16_t count) -{ - uint32_t eecd_reg; - uint32_t mask; - - /* We need to shift "count" bits out to the EEPROM. So, value in the - * "data" parameter will be shifted out to the EEPROM one bit at a time. - * In order to do this, "data" must be broken down into bits. - */ - mask = 0x01 << (count - 1); - eecd_reg = IXGB_READ_REG(hw, EECD); - eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); - do { - /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1", - * and then raising and then lowering the clock (the SK bit controls - * the clock input to the EEPROM). A "0" is shifted out to the EEPROM - * by setting "DI" to "0" and then raising and then lowering the clock. - */ - eecd_reg &= ~IXGB_EECD_DI; - - if(data & mask) - eecd_reg |= IXGB_EECD_DI; - - IXGB_WRITE_REG(hw, EECD, eecd_reg); - - usec_delay(50); - - ixgb_raise_clock(hw, &eecd_reg); - ixgb_lower_clock(hw, &eecd_reg); - - mask = mask >> 1; - - } while(mask); - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eecd_reg &= ~IXGB_EECD_DI; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - return; -} - -/****************************************************************************** - * Shift data bits in from the EEPROM - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static uint16_t -ixgb_shift_in_bits(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - uint32_t i; - uint16_t data; - - /* In order to read a register from the EEPROM, we need to shift 16 bits - * in from the EEPROM. Bits are "shifted in" by raising the clock input to - * the EEPROM (setting the SK bit), and then reading the value of the "DO" - * bit. During this "shifting in" process the "DI" bit should always be - * clear.. - */ - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI); - data = 0; - - for(i = 0; i < 16; i++) { - data = data << 1; - ixgb_raise_clock(hw, &eecd_reg); - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_DI); - if(eecd_reg & IXGB_EECD_DO) - data |= 1; - - ixgb_lower_clock(hw, &eecd_reg); - } - - return data; -} - -/****************************************************************************** - * Prepares EEPROM for access - * - * hw - Struct containing variables accessed by shared code - * - * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This - * function should be called before issuing a command to the EEPROM. - *****************************************************************************/ -static void -ixgb_setup_eeprom(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Clear SK and DI */ - eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI); - IXGB_WRITE_REG(hw, EECD, eecd_reg); - - /* Set CS */ - eecd_reg |= IXGB_EECD_CS; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - return; -} - -/****************************************************************************** - * Returns EEPROM to a "standby" state - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_standby_eeprom(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Deselct EEPROM */ - eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK); - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - - /* Clock high */ - eecd_reg |= IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - - /* Select EEPROM */ - eecd_reg |= IXGB_EECD_CS; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - - /* Clock low */ - eecd_reg &= ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - return; -} - -/****************************************************************************** - * Raises then lowers the EEPROM's clock pin - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_clock_eeprom(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - /* Rising edge of clock */ - eecd_reg |= IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - - /* Falling edge of clock */ - eecd_reg &= ~IXGB_EECD_SK; - IXGB_WRITE_REG(hw, EECD, eecd_reg); - usec_delay(50); - return; -} - -/****************************************************************************** - * Terminates a command by lowering the EEPROM's chip select pin - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_cleanup_eeprom(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - - eecd_reg = IXGB_READ_REG(hw, EECD); - - eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI); - - IXGB_WRITE_REG(hw, EECD, eecd_reg); - - ixgb_clock_eeprom(hw); - return; -} - -/****************************************************************************** - * Waits for the EEPROM to finish the current command. - * - * hw - Struct containing variables accessed by shared code - * - * The command is done when the EEPROM's data out pin goes high. - * - * Returns: - * TRUE: EEPROM data pin is high before timeout. - * FALSE: Time expired. - *****************************************************************************/ -static boolean_t -ixgb_wait_eeprom_command(struct ixgb_hw *hw) -{ - uint32_t eecd_reg; - uint32_t i; - - - /* Toggle the CS line. This in effect tells to EEPROM to actually execute - * the command in question. - */ - ixgb_standby_eeprom(hw); - - /* Now read DO repeatedly until is high (equal to '1'). The EEEPROM will - * signal that the command has been completed by raising the DO signal. - * If DO does not go high in 10 milliseconds, then error out. - */ - for(i = 0; i < 200; i++) { - eecd_reg = IXGB_READ_REG(hw, EECD); - - if(eecd_reg & IXGB_EECD_DO) - return (TRUE); - - usec_delay(50); - } - ASSERT(0); - return (FALSE); -} - - -/****************************************************************************** - * Verifies that the EEPROM has a valid checksum - * - * hw - Struct containing variables accessed by shared code - * - * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is - * valid. - * - * Returns: - * TRUE: Checksum is valid - * FALSE: Checksum is not valid. - *****************************************************************************/ -boolean_t -ixgb_validate_eeprom_checksum(struct ixgb_hw *hw) -{ - uint16_t checksum = 0; - uint16_t i; - - for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) - checksum += ixgb_read_eeprom(hw, i); - - if(checksum == (uint16_t) EEPROM_SUM) - return (TRUE); - else - return (FALSE); -} - -/****************************************************************************** - * Calculates the EEPROM checksum and writes it to the EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. - * Writes the difference to word offset 63 of the EEPROM. - *****************************************************************************/ -void -ixgb_update_eeprom_checksum(struct ixgb_hw *hw) -{ - uint16_t checksum = 0; - uint16_t i; - - for(i = 0; i < EEPROM_CHECKSUM_REG; i++) - checksum += ixgb_read_eeprom(hw, i); - - checksum = (uint16_t) EEPROM_SUM - checksum; - - ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum); - return; -} - -/****************************************************************************** - * Writes a 16 bit word to a given offset in the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * reg - offset within the EEPROM to be written to - * data - 16 bit word to be written to the EEPROM - * - * If ixgb_update_eeprom_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - * - *****************************************************************************/ -void -ixgb_write_eeprom(struct ixgb_hw *hw, - uint16_t offset, - uint16_t data) -{ - /* Prepare the EEPROM for writing */ - ixgb_setup_eeprom(hw); - - /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode - * plus 4-bit dummy). This puts the EEPROM into write/erase mode. - */ - ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5); - ixgb_shift_out_bits(hw, 0, 4); - - /* Prepare the EEPROM */ - ixgb_standby_eeprom(hw); - - /* Send the Write command (3-bit opcode + 6-bit addr) */ - ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3); - ixgb_shift_out_bits(hw, offset, 6); - - /* Send the data */ - ixgb_shift_out_bits(hw, data, 16); - - ixgb_wait_eeprom_command(hw); - - /* Recover from write */ - ixgb_standby_eeprom(hw); - - /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit - * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase - * mode. - */ - ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5); - ixgb_shift_out_bits(hw, 0, 4); - - /* Done with writing */ - ixgb_cleanup_eeprom(hw); - - return; -} - -/****************************************************************************** - * Reads a 16 bit word from the EEPROM. - * - * hw - Struct containing variables accessed by shared code - * offset - offset of 16 bit word in the EEPROM to read - * - * Returns: - * The 16-bit value read from the eeprom - *****************************************************************************/ -uint16_t -ixgb_read_eeprom(struct ixgb_hw *hw, - uint16_t offset) -{ - uint16_t data; - - /* Prepare the EEPROM for reading */ - ixgb_setup_eeprom(hw); - - /* Send the READ command (opcode + addr) */ - ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3); - /* - * We have a 64 word EEPROM, there are 6 address bits - */ - ixgb_shift_out_bits(hw, offset, 6); - - /* Read the data */ - data = ixgb_shift_in_bits(hw); - - /* End this read operation */ - ixgb_standby_eeprom(hw); - - return (data); -} - -/****************************************************************************** - * Reads eeprom and stores data in shared structure. - * Validates eeprom checksum and eeprom signature. - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * TRUE: if eeprom read is successful - * FALSE: otherwise. - *****************************************************************************/ -boolean_t -ixgb_get_eeprom_data(struct ixgb_hw *hw) -{ - uint16_t i; - uint16_t checksum = 0; - struct ixgb_ee_map_type *ee_map; - - DEBUGFUNC("ixgb_get_eeprom_data"); - - ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - DEBUGOUT("ixgb_ee: Reading eeprom data\n"); - for (i=0; i < IXGB_EEPROM_SIZE ; i++) { - uint16_t ee_data; - ee_data = ixgb_read_eeprom(hw, i); - checksum += ee_data; - hw->eeprom[i] = le16_to_cpu (ee_data); - } - - if (checksum != (uint16_t) EEPROM_SUM) { - DEBUGOUT("ixgb_ee: Checksum invalid.\n"); - return (FALSE); - } - - if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK)) - != le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) { - DEBUGOUT("ixgb_ee: Signature invalid.\n"); - return(FALSE); - } - - return(TRUE); -} - - -/****************************************************************************** - * Local function to check if the eeprom signature is good - * If the eeprom signature is good, calls ixgb)get_eeprom_data. - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * TRUE: eeprom signature was good and the eeprom read was successful - * FALSE: otherwise. - ******************************************************************************/ -static boolean_t -ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - - if ((ee_map->init_ctrl_reg_1 & le16_to_cpu(EEPROM_ICW1_SIGNATURE_MASK)) - == le16_to_cpu(EEPROM_ICW1_SIGNATURE_VALID)) { - return (TRUE); - } else { - return ixgb_get_eeprom_data(hw); - } -} - -/****************************************************************************** - * return a word from the eeprom - * - * hw - Struct containing variables accessed by shared code - * index - Offset of eeprom word - * - * Returns: - * Word at indexed offset in eeprom, if valid, 0 otherwise. - ******************************************************************************/ -uint16_t -ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index) -{ - - if ((index < IXGB_EEPROM_SIZE) && - (ixgb_check_and_get_eeprom_data (hw) == TRUE)) { - return(hw->eeprom[index]); - } - - return(0); -} - - -/****************************************************************************** - * return the mac address from EEPROM - * - * hw - Struct containing variables accessed by shared code - * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise - * - * Returns: None. - ******************************************************************************/ -void -ixgb_get_ee_mac_addr(struct ixgb_hw *hw, - uint8_t *mac_addr) -{ - int i; - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - DEBUGFUNC("ixgb_get_ee_mac_addr"); - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) { - for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) { - mac_addr[i] = ee_map->mac_addr[i]; - DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]); - } - } -} - -/****************************************************************************** - * return the compatibility flags from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * compatibility flags if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_compatibility(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->compatibility); - - return(0); -} - -/****************************************************************************** - * return the Printed Board Assembly number from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * PBA number if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint32_t -ixgb_get_ee_pba_number(struct ixgb_hw *hw) -{ - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return ( le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG]) - | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16)); - - return(0); -} - -/****************************************************************************** - * return the Initialization Control Word 1 from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->init_ctrl_reg_1); - - return(0); -} - -/****************************************************************************** - * return the Initialization Control Word 2 from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->init_ctrl_reg_2); - - return(0); -} - -/****************************************************************************** - * return the Subsystem Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Subsystem Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_subsystem_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->subsystem_id); - - return(0); -} - -/****************************************************************************** - * return the Sub Vendor Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Sub Vendor Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_subvendor_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->subvendor_id); - - return(0); -} - -/****************************************************************************** - * return the Device Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Device Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_device_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->device_id); - - return(0); -} - -/****************************************************************************** - * return the Vendor Id from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * Device Id if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_vendor_id(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->vendor_id); - - return(0); -} - -/****************************************************************************** - * return the Software Defined Pins Register from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * SDP Register if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint16_t -ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->swdpins_reg); - - return(0); -} - -/****************************************************************************** - * return the D3 Power Management Bits from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * D3 Power Management Bits if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint8_t -ixgb_get_ee_d3_power(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->d3_power); - - return(0); -} - -/****************************************************************************** - * return the D0 Power Management Bits from EEPROM - * - * hw - Struct containing variables accessed by shared code - * - * Returns: - * D0 Power Management Bits if EEPROM contents are valid, 0 otherwise - ******************************************************************************/ -uint8_t -ixgb_get_ee_d0_power(struct ixgb_hw *hw) -{ - struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *) hw->eeprom; - - if (ixgb_check_and_get_eeprom_data (hw) == TRUE) - return(ee_map->d0_power); - - return(0); -} diff --git a/sys/dev/ixgb/ixgb_ee.h b/sys/dev/ixgb/ixgb_ee.h deleted file mode 100644 index 8a07de7cceb6..000000000000 --- a/sys/dev/ixgb/ixgb_ee.h +++ /dev/null @@ -1,118 +0,0 @@ -/******************************************************************************* - SPDX-License-Identifier: BSD-3-Clause - - Copyright (c) 2001-2004, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/*$FreeBSD$*/ -#ifndef _IXGB_EE_H_ -#define _IXGB_EE_H_ - - -#define IXGB_EEPROM_SIZE 64 /* Size in words */ - -#define IXGB_ETH_LENGTH_OF_ADDRESS 6 - - -/* EEPROM Commands */ -#define EEPROM_READ_OPCODE 0x6 /* EERPOM read opcode */ -#define EEPROM_WRITE_OPCODE 0x5 /* EERPOM write opcode */ -#define EEPROM_ERASE_OPCODE 0x7 /* EERPOM erase opcode */ -#define EEPROM_EWEN_OPCODE 0x13 /* EERPOM erase/write enable */ -#define EEPROM_EWDS_OPCODE 0x10 /* EERPOM erast/write disable */ - -/* EEPROM MAP (Word Offsets) */ -#define EEPROM_IA_1_2_REG 0x0000 -#define EEPROM_IA_3_4_REG 0x0001 -#define EEPROM_IA_5_6_REG 0x0002 -#define EEPROM_COMPATIBILITY_REG 0x0003 -#define EEPROM_PBA_1_2_REG 0x0008 -#define EEPROM_PBA_3_4_REG 0x0009 -#define EEPROM_INIT_CONTROL1_REG 0x000A -#define EEPROM_SUBSYS_ID_REG 0x000B -#define EEPROM_SUBVEND_ID_REG 0x000C -#define EEPROM_DEVICE_ID_REG 0x000D -#define EEPROM_VENDOR_ID_REG 0x000E -#define EEPROM_INIT_CONTROL2_REG 0x000F -#define EEPROM_SWDPINS_REG 0x0020 -#define EEPROM_CIRCUIT_CTRL_REG 0x0021 -#define EEPROM_D0_D3_POWER_REG 0x0022 -#define EEPROM_FLASH_VERSION 0x0032 -#define EEPROM_CHECKSUM_REG 0x003F - -/* Mask bits for fields in Word 0x0a of the EEPROM */ - -#define EEPROM_ICW1_SIGNATURE_MASK 0xC000 -#define EEPROM_ICW1_SIGNATURE_VALID 0x4000 - -/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ -#define EEPROM_SUM 0xBABA - -/* EEPROM Map Sizes (Byte Counts) */ -#define PBA_SIZE 4 - -/* EEPROM Map defines (WORD OFFSETS)*/ - -/* EEPROM structure */ -struct ixgb_ee_map_type{ - uint8_t mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; - uint16_t compatibility; - uint16_t reserved1[4]; - uint32_t pba_number; - uint16_t init_ctrl_reg_1; - uint16_t subsystem_id; - uint16_t subvendor_id; - uint16_t device_id; - uint16_t vendor_id; - uint16_t init_ctrl_reg_2; - uint16_t oem_reserved[16]; - uint16_t swdpins_reg; - uint16_t circuit_ctrl_reg; - uint8_t d3_power; - uint8_t d0_power; - uint16_t reserved2[28]; - uint16_t checksum; - }; - -/* EEPROM Functions */ -uint16_t ixgb_read_eeprom(struct ixgb_hw *hw, - uint16_t reg); - -boolean_t ixgb_validate_eeprom_checksum(struct ixgb_hw *hw); - -void ixgb_update_eeprom_checksum(struct ixgb_hw *hw); - -void ixgb_write_eeprom(struct ixgb_hw *hw, - uint16_t reg, - uint16_t data); - -#endif /* IXGB_EE_H */ - diff --git a/sys/dev/ixgb/ixgb_hw.c b/sys/dev/ixgb/ixgb_hw.c deleted file mode 100644 index 3832546d2e00..000000000000 --- a/sys/dev/ixgb/ixgb_hw.c +++ /dev/null @@ -1,1223 +0,0 @@ -/******************************************************************************* - SPDX-License-Identifier: BSD-3-Clause - - Copyright (c) 2001-2004, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/*$FreeBSD$*/ - -/* ixgb_hw.c - * Shared functions for accessing and configuring the adapter - */ - -#include -#include - -/* Local function prototypes */ - -static uint32_t ixgb_hash_mc_addr(struct ixgb_hw *hw, - uint8_t *mc_addr); - -static void ixgb_mta_set(struct ixgb_hw *hw, - uint32_t hash_value); - -static void ixgb_get_bus_info(struct ixgb_hw *hw); - -static boolean_t ixgb_link_reset(struct ixgb_hw *hw); - -static void ixgb_optics_reset(struct ixgb_hw *hw); - -static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw); - -uint32_t ixgb_mac_reset (struct ixgb_hw* hw); - -uint32_t ixgb_mac_reset (struct ixgb_hw* hw) -{ - uint32_t ctrl_reg; - - /* Setup up hardware to known state with RESET. - * SWDPIN settings as per Kemano EPS. - */ - ctrl_reg = IXGB_CTRL0_RST | - IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */ - IXGB_CTRL0_SDP2_DIR | - IXGB_CTRL0_SDP1_DIR | - IXGB_CTRL0_SDP0_DIR | - IXGB_CTRL0_SDP3 | /* Initial value 1101 */ - IXGB_CTRL0_SDP2 | - IXGB_CTRL0_SDP0; - -#ifdef HP_ZX1 - /* Workaround for 82597EX reset errata */ - IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg); -#else - IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); -#endif - - /* Delay a few ms just to allow the reset to complete */ - msec_delay(IXGB_DELAY_AFTER_RESET); - ctrl_reg = IXGB_READ_REG(hw, CTRL0); -#if DBG - /* Make sure the self-clearing global reset bit did self clear */ - ASSERT(!(ctrl_reg & IXGB_CTRL0_RST)); -#endif - - if (hw->phy_type == ixgb_phy_type_txn17401) { - /* Now reset the optics. This reset is required to ensure link with - * the Kemano 003 optical module (TXN17401), as per instructions from - * the board designer. - */ - ixgb_optics_reset(hw); - } - - return ctrl_reg; -} - - -/****************************************************************************** - * Reset the transmit and receive units; mask and clear all interrupts. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -boolean_t -ixgb_adapter_stop(struct ixgb_hw *hw) -{ - uint32_t ctrl_reg; - uint32_t icr_reg; - - DEBUGFUNC("ixgb_adapter_stop"); - - /* If we are stopped or resetting exit gracefully and wait to be - * started again before accessing the hardware. - */ - if(hw->adapter_stopped) { - DEBUGOUT("Exiting because the adapter is already stopped!!!\n"); - return FALSE; - } - - /* Set the Adapter Stopped flag so other driver functions stop - * touching the Hardware. - */ - hw->adapter_stopped = TRUE; - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF); - - /* Disable the Transmit and Receive units. Then delay to allow - * any pending transactions to complete before we hit the MAC with - * the global reset. - */ - IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN); - IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN); - msec_delay(IXGB_DELAY_BEFORE_RESET); - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - DEBUGOUT("Issuing a global reset to MAC\n"); - - ctrl_reg = ixgb_mac_reset(hw); - - /* Clear interrupt mask to stop board from generating interrupts */ - DEBUGOUT("Masking off all interrupts\n"); - IXGB_WRITE_REG(hw, IMC, 0xffffffff); - - /* Clear any pending interrupt events. */ - icr_reg = IXGB_READ_REG(hw, ICR); - - return (ctrl_reg & IXGB_CTRL0_RST); -} - - -/****************************************************************************** - * Identifies the vendor of the optics module on the adapter. The SR adapters - * support two different types of XPAK optics, so it is necessary to determine - * which optics are present before applying any optics-specific workarounds. - * - * hw - Struct containing variables accessed by shared code. - * - * Returns: the vendor of the XPAK optics module. - *****************************************************************************/ -static ixgb_xpak_vendor -ixgb_identify_xpak_vendor(struct ixgb_hw *hw) -{ - uint32_t i; - uint16_t vendor_name[5]; - ixgb_xpak_vendor xpak_vendor; - - DEBUGFUNC("ixgb_identify_xpak_vendor"); - - /* Read the first few bytes of the vendor string from the XPAK NVR - * registers. These are standard XENPAK/XPAK registers, so all XPAK - * devices should implement them. */ - for (i = 0; i < 5; i++) { - vendor_name[i] = ixgb_read_phy_reg( hw, - MDIO_PMA_PMD_XPAK_VENDOR_NAME + i, - IXGB_PHY_ADDRESS, - MDIO_PMA_PMD_DID ); - } - - /* Determine the actual vendor */ - if (vendor_name[0] == 'I' && - vendor_name[1] == 'N' && - vendor_name[2] == 'T' && - vendor_name[3] == 'E' && - vendor_name[4] == 'L') { - xpak_vendor = ixgb_xpak_vendor_intel; - } - else { - xpak_vendor = ixgb_xpak_vendor_infineon; - } - - return (xpak_vendor); -} - - -/****************************************************************************** - * Determine the physical layer module on the adapter. - * - * hw - Struct containing variables accessed by shared code. The device_id - * field must be (correctly) populated before calling this routine. - * - * Returns: the phy type of the adapter. - *****************************************************************************/ -static ixgb_phy_type -ixgb_identify_phy(struct ixgb_hw *hw) -{ - ixgb_phy_type phy_type; - ixgb_xpak_vendor xpak_vendor; - - DEBUGFUNC("ixgb_identify_phy"); - - /* Infer the transceiver/phy type from the device id */ - switch (hw->device_id) { - case IXGB_DEVICE_ID_82597EX: - DEBUGOUT("Identified TXN17401 optics\n"); - phy_type = ixgb_phy_type_txn17401; - break; - - case IXGB_DEVICE_ID_82597EX_SR: - /* The SR adapters carry two different types of XPAK optics - * modules; read the vendor identifier to determine the exact - * type of optics. */ - xpak_vendor = ixgb_identify_xpak_vendor(hw); - if (xpak_vendor == ixgb_xpak_vendor_intel) { - DEBUGOUT("Identified TXN17201 optics\n"); - phy_type = ixgb_phy_type_txn17201; - } - else { - DEBUGOUT("Identified G6005 optics\n"); - phy_type = ixgb_phy_type_g6005; - } - break; - - - default: - DEBUGOUT("Unknown physical layer module\n"); - phy_type = ixgb_phy_type_unknown; - break; - } - - return (phy_type); -} - -/****************************************************************************** - * Performs basic configuration of the adapter. - * - * hw - Struct containing variables accessed by shared code - * - * Resets the controller. - * Reads and validates the EEPROM. - * Initializes the receive address registers. - * Initializes the multicast table. - * Clears all on-chip counters. - * Calls routine to setup flow control settings. - * Leaves the transmit and receive units disabled and uninitialized. - * - * Returns: - * TRUE if successful, - * FALSE if unrecoverable problems were encountered. - *****************************************************************************/ -boolean_t -ixgb_init_hw(struct ixgb_hw *hw) -{ - uint32_t i; - uint32_t ctrl_reg; - boolean_t status; - - DEBUGFUNC("ixgb_init_hw"); - - /* Issue a global reset to the MAC. This will reset the chip's - * transmit, receive, DMA, and link units. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - DEBUGOUT("Issuing a global reset to MAC\n"); - - ctrl_reg = ixgb_mac_reset(hw); - - DEBUGOUT("Issuing an EE reset to MAC\n"); -#ifdef HP_ZX1 - /* Workaround for 82597EX reset errata */ - IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST); -#else - IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST); -#endif - - /* Delay a few ms just to allow the reset to complete */ - msec_delay(IXGB_DELAY_AFTER_EE_RESET); - - if (ixgb_get_eeprom_data(hw) == FALSE) { - return(FALSE); - } - - /* Use the device id to determine the type of phy/transceiver. */ - hw->device_id = ixgb_get_ee_device_id(hw); - hw->phy_type = ixgb_identify_phy(hw); - - /* Setup the receive addresses. - * Receive Address Registers (RARs 0 - 15). - */ - ixgb_init_rx_addrs(hw); - - /* - * Check that a valid MAC address has been set. - * If it is not valid, we fail hardware init. - */ - if (!mac_addr_valid(hw->curr_mac_addr)) { - DEBUGOUT("MAC address invalid after ixgb_init_rx_addrs\n"); - return(FALSE); - } - - /* tell the routines in this file they can access hardware again */ - hw->adapter_stopped = FALSE; - - /* Fill in the bus_info structure */ - ixgb_get_bus_info(hw); - - /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - for(i = 0; i < IXGB_MC_TBL_SIZE; i++) - IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); - - /* Zero out the VLAN Filter Table Array */ - ixgb_clear_vfta(hw); - - /* Zero all of the hardware counters */ - ixgb_clear_hw_cntrs(hw); - - /* Call a subroutine to setup flow control. */ - status = ixgb_setup_fc(hw); - - /* 82597EX errata: Call check-for-link in case lane deskew is locked */ - ixgb_check_for_link(hw); - - return (status); -} - -/****************************************************************************** - * Initializes receive address filters. - * - * hw - Struct containing variables accessed by shared code - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive addresss registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - *****************************************************************************/ -void -ixgb_init_rx_addrs(struct ixgb_hw *hw) -{ - uint32_t i; - - DEBUGFUNC("ixgb_init_rx_addrs"); - - /* - * If the current mac address is valid, assume it is a software override - * to the permanent address. - * Otherwise, use the permanent address from the eeprom. - */ - if (!mac_addr_valid(hw->curr_mac_addr)) { - - /* Get the MAC address from the eeprom for later reference */ - ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr); - - DEBUGOUT3(" Keeping Permanent MAC Addr =%.2X %.2X %.2X ", - hw->curr_mac_addr[0], - hw->curr_mac_addr[1], - hw->curr_mac_addr[2]); - DEBUGOUT3("%.2X %.2X %.2X\n", - hw->curr_mac_addr[3], - hw->curr_mac_addr[4], - hw->curr_mac_addr[5]); - } else { - - /* Setup the receive address. */ - DEBUGOUT("Overriding MAC Address in RAR[0]\n"); - DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ", - hw->curr_mac_addr[0], - hw->curr_mac_addr[1], - hw->curr_mac_addr[2]); - DEBUGOUT3("%.2X %.2X %.2X\n", - hw->curr_mac_addr[3], - hw->curr_mac_addr[4], - hw->curr_mac_addr[5]); - - - ixgb_rar_set(hw, hw->curr_mac_addr, 0); - } - - /* Zero out the other 15 receive addresses. */ - DEBUGOUT("Clearing RAR[1-15]\n"); - for(i = 1; i < IXGB_RAR_ENTRIES; i++) { - IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - } - - return; -} - -/****************************************************************************** - * Updates the MAC's list of multicast addresses. - * - * hw - Struct containing variables accessed by shared code - * mc_addr_list - the list of new multicast addresses - * mc_addr_count - number of addresses - * pad - number of bytes between addresses in the list - * - * The given list replaces any existing list. Clears the last 15 receive - * address registers and the multicast table. Uses receive address registers - * for the first 15 multicast addresses, and hashes the rest into the - * multicast table. - *****************************************************************************/ -void -ixgb_mc_addr_list_update(struct ixgb_hw *hw, - uint8_t *mc_addr_list, - uint32_t mc_addr_count, - uint32_t pad) -{ - uint32_t hash_value; - uint32_t i; - uint32_t rar_used_count = 1; /* RAR[0] is used for our MAC address */ - - DEBUGFUNC("ixgb_mc_addr_list_update"); - - /* Set the new number of MC addresses that we are being requested to use. */ - hw->num_mc_addrs = mc_addr_count; - - /* Clear RAR[1-15] */ - DEBUGOUT(" Clearing RAR[1-15]\n"); - for(i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) { - IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - } - - /* Clear the MTA */ - DEBUGOUT(" Clearing MTA\n"); - for(i = 0; i < IXGB_MC_TBL_SIZE; i++) { - IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0); - } - - /* Add the new addresses */ - for(i = 0; i < mc_addr_count; i++) { - DEBUGOUT(" Adding the multicast addresses:\n"); - DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + 1], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + 2], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + 3], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + 4], - mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) + 5]); - - /* Place this multicast address in the RAR if there is room, * - * else put it in the MTA - */ - if(rar_used_count < IXGB_RAR_ENTRIES) { - ixgb_rar_set(hw, - mc_addr_list + (i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)), - rar_used_count); - DEBUGOUT1("Added a multicast address to RAR[%d]\n", i); - rar_used_count++; - } else { - hash_value = ixgb_hash_mc_addr(hw, - mc_addr_list + - (i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad))); - - DEBUGOUT1(" Hash value = 0x%03X\n", hash_value); - - ixgb_mta_set(hw, hash_value); - } - } - - DEBUGOUT("MC Update Complete\n"); - return; -} - -/****************************************************************************** - * Hashes an address to determine its location in the multicast table - * - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * Returns: - * The hash value - *****************************************************************************/ -static uint32_t -ixgb_hash_mc_addr(struct ixgb_hw *hw, - uint8_t *mc_addr) -{ - uint32_t hash_value = 0; - - DEBUGFUNC("ixgb_hash_mc_addr"); - - /* The portion of the address that is used for the hash table is - * determined by the mc_filter_type setting. - */ - switch (hw->mc_filter_type) { - /* [0] [1] [2] [3] [4] [5] - * 01 AA 00 12 34 56 - * LSB MSB - According to H/W docs */ - case 0: - /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((uint16_t) mc_addr[5]) << 4)); - break; - case 1: /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((uint16_t) mc_addr[5]) << 5)); - break; - case 2: /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((uint16_t) mc_addr[5]) << 6)); - break; - case 3: /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((uint16_t) mc_addr[5]) << 8)); - break; - default: - /* Invalid mc_filter_type, what should we do? */ - DEBUGOUT("MC filter type param set incorrectly\n"); - ASSERT(0); - break; - } - - hash_value &= 0xFFF; - return (hash_value); -} - -/****************************************************************************** - * Sets the bit in the multicast table corresponding to the hash value. - * - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - *****************************************************************************/ -static void -ixgb_mta_set(struct ixgb_hw *hw, - uint32_t hash_value) -{ - uint32_t hash_bit, hash_reg; - uint32_t mta_reg; - - /* The MTA is a register array of 128 32-bit registers. - * It is treated like an array of 4096 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 5) & 0x7F; - hash_bit = hash_value & 0x1F; - - mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg); - - mta_reg |= (1 << hash_bit); - - IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg); - - return; -} - -/****************************************************************************** - * Puts an ethernet address into a receive address register. - * - * hw - Struct containing variables accessed by shared code - * addr - Address to put into receive address register - * index - Receive address register to write - *****************************************************************************/ -void -ixgb_rar_set(struct ixgb_hw *hw, - uint8_t *addr, - uint32_t index) -{ - uint32_t rar_low, rar_high; - - DEBUGFUNC("ixgb_rar_set"); - - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((uint32_t) addr[0] | - ((uint32_t) addr[1] << 8) | - ((uint32_t) addr[2] << 16) | - ((uint32_t) addr[3] << 24)); - - rar_high = ((uint32_t) addr[4] | - ((uint32_t) addr[5] << 8) | - IXGB_RAH_AV); - - IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); - IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); - return; -} - -/****************************************************************************** - * Writes a value to the specified offset in the VLAN filter table. - * - * hw - Struct containing variables accessed by shared code - * offset - Offset in VLAN filer table to write - * value - Value to write into VLAN filter table - *****************************************************************************/ -void -ixgb_write_vfta(struct ixgb_hw *hw, - uint32_t offset, - uint32_t value) -{ - IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value); - return; -} - -/****************************************************************************** - * Clears the VLAN filer table - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_clear_vfta(struct ixgb_hw *hw) -{ - uint32_t offset; - - for(offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++) - IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0); - return; -} - -/****************************************************************************** - * Configures the flow control settings based on SW configuration. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ - -boolean_t -ixgb_setup_fc(struct ixgb_hw *hw) -{ - uint32_t ctrl_reg; - uint32_t pap_reg = 0; /* by default, assume no pause time */ - boolean_t status = TRUE; - - DEBUGFUNC("ixgb_setup_fc"); - - /* Get the current control reg 0 settings */ - ctrl_reg = IXGB_READ_REG(hw, CTRL0); - - /* Clear the Receive Pause Enable and Transmit Pause Enable bits */ - ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); - - /* The possible values of the "flow_control" parameter are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames - * but we do not support receiving pause frames). - * 3: Both Rx and TX flow control (symmetric) are enabled. - * other: Invalid. - */ - switch (hw->fc.type) { - case ixgb_fc_none: /* 0 */ - /* Set CMDC bit to disable Rx Flow control*/ - ctrl_reg |= (IXGB_CTRL0_CMDC); - break; - case ixgb_fc_rx_pause: /* 1 */ - /* RX Flow control is enabled, and TX Flow control is - * disabled. - */ - ctrl_reg |= (IXGB_CTRL0_RPE); - break; - case ixgb_fc_tx_pause: /* 2 */ - /* TX Flow control is enabled, and RX Flow control is - * disabled, by a software over-ride. - */ - ctrl_reg |= (IXGB_CTRL0_TPE); - pap_reg = hw->fc.pause_time; - break; - case ixgb_fc_full: /* 3 */ - /* Flow control (both RX and TX) is enabled by a software - * over-ride. - */ - ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE); - pap_reg = hw->fc.pause_time; - break; - default: - /* We should never get here. The value should be 0-3. */ - DEBUGOUT("Flow control param set incorrectly\n"); - ASSERT(0); - break; - } - - /* Write the new settings */ - IXGB_WRITE_REG(hw, CTRL0, ctrl_reg); - - if (pap_reg != 0) { - IXGB_WRITE_REG(hw, PAP, pap_reg); - } - - /* Set the flow control receive threshold registers. Normally, - * these registers will be set to a default threshold that may be - * adjusted later by the driver's runtime code. However, if the - * ability to transmit pause frames in not enabled, then these - * registers will be set to 0. - */ - if(!(hw->fc.type & ixgb_fc_tx_pause)) { - IXGB_WRITE_REG(hw, FCRTL, 0); - IXGB_WRITE_REG(hw, FCRTH, 0); - } else { - /* We need to set up the Receive Threshold high and low water - * marks as well as (optionally) enabling the transmission of XON frames. - */ - if(hw->fc.send_xon) { - IXGB_WRITE_REG(hw, FCRTL, - (hw->fc.low_water | IXGB_FCRTL_XONE)); - } else { - IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water); - } - IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water); - } - return (status); -} - -/****************************************************************************** - * Reads a word from a device over the Management Data Interface (MDI) bus. - * This interface is used to manage Physical layer devices. - * - * hw - Struct containing variables accessed by hw code - * reg_address - Offset of device register being read. - * phy_address - Address of device on MDI. - * - * Returns: Data word (16 bits) from MDI device. - * - * The 82597EX has support for several MDI access methods. This routine - * uses the new protocol MDI Single Command and Address Operation. - * This requires that first an address cycle command is sent, followed by a - * read command. - *****************************************************************************/ -uint16_t -ixgb_read_phy_reg(struct ixgb_hw *hw, - uint32_t reg_address, - uint32_t phy_address, - uint32_t device_type) -{ - uint32_t i; - uint32_t data; - uint32_t command = 0; - - ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); - ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); - ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); - - /* Setup and write the address cycle command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the address cycle completed - ** The COMMAND bit will clear when the operation is complete. - ** This may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - usec_delay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Address cycle complete, setup and write the read command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the read command completed - ** The COMMAND bit will clear when the operation is complete. - ** The read may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - usec_delay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Operation is complete, get the data from the MDIO Read/Write Data - * register and return. - */ - data = IXGB_READ_REG(hw, MSRWD); - data >>= IXGB_MSRWD_READ_DATA_SHIFT; - return((uint16_t) data); -} - -/****************************************************************************** - * Writes a word to a device over the Management Data Interface (MDI) bus. - * This interface is used to manage Physical layer devices. - * - * hw - Struct containing variables accessed by hw code - * reg_address - Offset of device register being read. - * phy_address - Address of device on MDI. - * device_type - Also known as the Device ID or DID. - * data - 16-bit value to be written - * - * Returns: void. - * - * The 82597EX has support for several MDI access methods. This routine - * uses the new protocol MDI Single Command and Address Operation. - * This requires that first an address cycle command is sent, followed by a - * write command. - *****************************************************************************/ -void -ixgb_write_phy_reg(struct ixgb_hw *hw, - uint32_t reg_address, - uint32_t phy_address, - uint32_t device_type, - uint16_t data) -{ - uint32_t i; - uint32_t command = 0; - - ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS); - ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS); - ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE); - - /* Put the data in the MDIO Read/Write Data register */ - IXGB_WRITE_REG(hw, MSRWD, (uint32_t)data); - - /* Setup and write the address cycle command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the address cycle completed - ** The COMMAND bit will clear when the operation is complete. - ** This may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - usec_delay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Address cycle complete, setup and write the write command */ - command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) | - (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) | - (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND)); - - IXGB_WRITE_REG(hw, MSCA, command); - - /************************************************************** - ** Check every 10 usec to see if the read command completed - ** The COMMAND bit will clear when the operation is complete. - ** The write may take as long as 64 usecs (we'll wait 100 usecs max) - ** from the CPU Write to the Ready bit assertion. - **************************************************************/ - - for (i = 0; i < 10; i++) - { - usec_delay(10); - - command = IXGB_READ_REG(hw, MSCA); - - if ((command & IXGB_MSCA_MDI_COMMAND) == 0) - break; - } - - ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0); - - /* Operation is complete, return. */ -} - - -/****************************************************************************** - * Checks to see if the link status of the hardware has changed. - * - * hw - Struct containing variables accessed by hw code - * - * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ -void -ixgb_check_for_link(struct ixgb_hw *hw) -{ - uint32_t status_reg; - uint32_t xpcss_reg; - - DEBUGFUNC("ixgb_check_for_link"); - - xpcss_reg = IXGB_READ_REG(hw, XPCSS); - status_reg = IXGB_READ_REG(hw, STATUS); - - if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && - (status_reg & IXGB_STATUS_LU)) { - hw->link_up = TRUE; - } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) && - (status_reg & IXGB_STATUS_LU)) { - DEBUGOUT("XPCSS Not Aligned while Status:LU is set.\n"); - hw->link_up = ixgb_link_reset(hw); - } else { - /* - * 82597EX errata. Since the lane deskew problem may prevent - * link, reset the link before reporting link down. - */ - hw->link_up = ixgb_link_reset(hw); - } - /* Anything else for 10 Gig?? */ -} - -/****************************************************************************** - * Check for a bad link condition that may have occurred. - * The indication is that the RFC / LFC registers may be incrementing - * continually. A full adapter reset is required to recover. - * - * hw - Struct containing variables accessed by hw code - * - * Called by any function that needs to check the link status of the adapter. - *****************************************************************************/ -boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw) -{ - uint32_t newLFC, newRFC; - boolean_t bad_link_returncode = FALSE; - - if (hw->phy_type == ixgb_phy_type_txn17401) { - newLFC = IXGB_READ_REG(hw, LFC); - newRFC = IXGB_READ_REG(hw, RFC); - if ((hw->lastLFC + 250 < newLFC) || (hw->lastRFC + 250 < newRFC)) { - DEBUGOUT("BAD LINK! too many LFC/RFC since last check\n"); - bad_link_returncode = TRUE; - } - hw->lastLFC = newLFC; - hw->lastRFC = newRFC; - } - - return bad_link_returncode; -} - - -/****************************************************************************** - * Clears all hardware statistics counters. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_clear_hw_cntrs(struct ixgb_hw *hw) -{ - volatile uint32_t temp_reg; - - DEBUGFUNC("ixgb_clear_hw_cntrs"); - - /* if we are stopped or resetting exit gracefully */ - if(hw->adapter_stopped) { - DEBUGOUT("Exiting because the adapter is stopped!!!\n"); - return; - } - - temp_reg = IXGB_READ_REG(hw, TPRL); - temp_reg = IXGB_READ_REG(hw, TPRH); - temp_reg = IXGB_READ_REG(hw, GPRCL); - temp_reg = IXGB_READ_REG(hw, GPRCH); - temp_reg = IXGB_READ_REG(hw, BPRCL); - temp_reg = IXGB_READ_REG(hw, BPRCH); - temp_reg = IXGB_READ_REG(hw, MPRCL); - temp_reg = IXGB_READ_REG(hw, MPRCH); - temp_reg = IXGB_READ_REG(hw, UPRCL); - temp_reg = IXGB_READ_REG(hw, UPRCH); - temp_reg = IXGB_READ_REG(hw, VPRCL); - temp_reg = IXGB_READ_REG(hw, VPRCH); - temp_reg = IXGB_READ_REG(hw, JPRCL); - temp_reg = IXGB_READ_REG(hw, JPRCH); - temp_reg = IXGB_READ_REG(hw, GORCL); - temp_reg = IXGB_READ_REG(hw, GORCH); - temp_reg = IXGB_READ_REG(hw, TORL); - temp_reg = IXGB_READ_REG(hw, TORH); - temp_reg = IXGB_READ_REG(hw, RNBC); - temp_reg = IXGB_READ_REG(hw, RUC); - temp_reg = IXGB_READ_REG(hw, ROC); - temp_reg = IXGB_READ_REG(hw, RLEC); - temp_reg = IXGB_READ_REG(hw, CRCERRS); - temp_reg = IXGB_READ_REG(hw, ICBC); - temp_reg = IXGB_READ_REG(hw, ECBC); - temp_reg = IXGB_READ_REG(hw, MPC); - temp_reg = IXGB_READ_REG(hw, TPTL); - temp_reg = IXGB_READ_REG(hw, TPTH); - temp_reg = IXGB_READ_REG(hw, GPTCL); - temp_reg = IXGB_READ_REG(hw, GPTCH); - temp_reg = IXGB_READ_REG(hw, BPTCL); - temp_reg = IXGB_READ_REG(hw, BPTCH); - temp_reg = IXGB_READ_REG(hw, MPTCL); - temp_reg = IXGB_READ_REG(hw, MPTCH); - temp_reg = IXGB_READ_REG(hw, UPTCL); - temp_reg = IXGB_READ_REG(hw, UPTCH); - temp_reg = IXGB_READ_REG(hw, VPTCL); - temp_reg = IXGB_READ_REG(hw, VPTCH); - temp_reg = IXGB_READ_REG(hw, JPTCL); - temp_reg = IXGB_READ_REG(hw, JPTCH); - temp_reg = IXGB_READ_REG(hw, GOTCL); - temp_reg = IXGB_READ_REG(hw, GOTCH); - temp_reg = IXGB_READ_REG(hw, TOTL); - temp_reg = IXGB_READ_REG(hw, TOTH); - temp_reg = IXGB_READ_REG(hw, DC); - temp_reg = IXGB_READ_REG(hw, PLT64C); - temp_reg = IXGB_READ_REG(hw, TSCTC); - temp_reg = IXGB_READ_REG(hw, TSCTFC); - temp_reg = IXGB_READ_REG(hw, IBIC); - temp_reg = IXGB_READ_REG(hw, RFC); - temp_reg = IXGB_READ_REG(hw, LFC); - temp_reg = IXGB_READ_REG(hw, PFRC); - temp_reg = IXGB_READ_REG(hw, PFTC); - temp_reg = IXGB_READ_REG(hw, MCFRC); - temp_reg = IXGB_READ_REG(hw, MCFTC); - temp_reg = IXGB_READ_REG(hw, XONRXC); - temp_reg = IXGB_READ_REG(hw, XONTXC); - temp_reg = IXGB_READ_REG(hw, XOFFRXC); - temp_reg = IXGB_READ_REG(hw, XOFFTXC); - temp_reg = IXGB_READ_REG(hw, RJC); - return; -} - - -/****************************************************************************** - * Turns on the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_led_on(struct ixgb_hw *hw) -{ - uint32_t ctrl0_reg = IXGB_READ_REG(hw, CTRL0); - - /* To turn on the LED, clear software-definable pin 0 (SDP0). */ - ctrl0_reg &= ~IXGB_CTRL0_SDP0; - IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); - return; -} - -/****************************************************************************** - * Turns off the software controllable LED - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_led_off(struct ixgb_hw *hw) -{ - uint32_t ctrl0_reg = IXGB_READ_REG(hw, CTRL0); - - /* To turn off the LED, set software-definable pin 0 (SDP0). */ - ctrl0_reg |= IXGB_CTRL0_SDP0; - IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg); - return; -} - - -/****************************************************************************** - * Gets the current PCI bus type, speed, and width of the hardware - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -static void -ixgb_get_bus_info(struct ixgb_hw *hw) -{ - uint32_t status_reg; - - status_reg = IXGB_READ_REG(hw, STATUS); - - hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ? - ixgb_bus_type_pcix : ixgb_bus_type_pci; - - if (hw->bus.type == ixgb_bus_type_pci) { - hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ? - ixgb_bus_speed_66 : ixgb_bus_speed_33; - } else { - switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) { - case IXGB_STATUS_PCIX_SPD_66: - hw->bus.speed = ixgb_bus_speed_66; - break; - case IXGB_STATUS_PCIX_SPD_100: - hw->bus.speed = ixgb_bus_speed_100; - break; - case IXGB_STATUS_PCIX_SPD_133: - hw->bus.speed = ixgb_bus_speed_133; - break; - default: - hw->bus.speed = ixgb_bus_speed_reserved; - break; - } - } - - hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ? - ixgb_bus_width_64 : ixgb_bus_width_32; - - return; -} - - - -/****************************************************************************** - * Tests a MAC address to ensure it is a valid Individual Address - * - * mac_addr - pointer to MAC address. - * - *****************************************************************************/ -boolean_t -mac_addr_valid(uint8_t *mac_addr) -{ - boolean_t is_valid = TRUE; - DEBUGFUNC("mac_addr_valid"); - - - /* Make sure it is not a multicast address */ - if (IS_MULTICAST(mac_addr)) { - DEBUGOUT("MAC address is multicast\n"); - is_valid = FALSE; - } - /* Not a broadcast address */ - else if (IS_BROADCAST(mac_addr)) { - DEBUGOUT("MAC address is broadcast\n"); - is_valid = FALSE; - } - /* Reject the zero address */ - else if (mac_addr[0] == 0 && - mac_addr[1] == 0 && - mac_addr[2] == 0 && - mac_addr[3] == 0 && - mac_addr[4] == 0 && - mac_addr[5] == 0) { - DEBUGOUT("MAC address is all zeros\n"); - is_valid = FALSE; - } - return (is_valid); -} - -/****************************************************************************** - * Resets the 10GbE link. Waits the settle time and returns the state of - * the link. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -boolean_t -ixgb_link_reset(struct ixgb_hw *hw) -{ - boolean_t link_status = FALSE; - uint8_t wait_retries = MAX_RESET_ITERATIONS; - uint8_t lrst_retries = MAX_RESET_ITERATIONS; - - - do { - /* Reset the link */ - IXGB_WRITE_REG(hw, CTRL0, IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST); - - /* Wait for link-up and lane re-alignment */ - do { - usec_delay(IXGB_DELAY_USECS_AFTER_LINK_RESET); - link_status = ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU) && - (IXGB_READ_REG(hw, XPCSS) & IXGB_XPCSS_ALIGN_STATUS)) ? - TRUE : FALSE; - } while (!link_status && -- wait_retries); - - } while (!link_status && --lrst_retries); - - return link_status; -} - - - -/****************************************************************************** - * Resets the 10GbE optics module. - * - * hw - Struct containing variables accessed by shared code - *****************************************************************************/ -void -ixgb_optics_reset(struct ixgb_hw *hw) -{ - if (hw->phy_type == ixgb_phy_type_txn17401) { - uint16_t mdio_reg; - - ixgb_write_phy_reg( hw, - MDIO_PMA_PMD_CR1, - IXGB_PHY_ADDRESS, - MDIO_PMA_PMD_DID, - MDIO_PMA_PMD_CR1_RESET); - - mdio_reg = ixgb_read_phy_reg( hw, - MDIO_PMA_PMD_CR1, - IXGB_PHY_ADDRESS, - MDIO_PMA_PMD_DID); - } - - return; -} - diff --git a/sys/dev/ixgb/ixgb_hw.h b/sys/dev/ixgb/ixgb_hw.h deleted file mode 100644 index 159807e5bf23..000000000000 --- a/sys/dev/ixgb/ixgb_hw.h +++ /dev/null @@ -1,858 +0,0 @@ -/******************************************************************************* - SPDX-License-Identifier: BSD-3-Clause - - Copyright (c) 2001-2004, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/*$FreeBSD$*/ -#ifndef _IXGB_HW_H_ -#define _IXGB_HW_H_ - -#include - -/* Enums */ -typedef enum { - ixgb_mac_unknown = 0, - ixgb_82597, - ixgb_num_macs -} ixgb_mac_type; - -/* Types of physical layer modules */ -typedef enum { - ixgb_phy_type_unknown = 0, - ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */ - ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */ - ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */ - ixgb_phy_type_txn17401 /* 1310nm, SM fiber, XENPAK transceiver */ -} ixgb_phy_type; - -/* XPAK transceiver vendors, for the SR adapters */ -typedef enum { - ixgb_xpak_vendor_intel, - ixgb_xpak_vendor_infineon -} ixgb_xpak_vendor; - -/* Media Types */ -typedef enum { - ixgb_media_type_unknown = 0, - ixgb_media_type_fiber = 1, - ixgb_num_media_types -} ixgb_media_type; - -/* Flow Control Settings */ -typedef enum { - ixgb_fc_none = 0, - ixgb_fc_rx_pause = 1, - ixgb_fc_tx_pause = 2, - ixgb_fc_full = 3, - ixgb_fc_default = 0xFF -} ixgb_fc_type; - -/* PCI bus types */ -typedef enum { - ixgb_bus_type_unknown = 0, - ixgb_bus_type_pci, - ixgb_bus_type_pcix -} ixgb_bus_type; - -/* PCI bus speeds */ -typedef enum { - ixgb_bus_speed_unknown = 0, - ixgb_bus_speed_33, - ixgb_bus_speed_66, - ixgb_bus_speed_100, - ixgb_bus_speed_133, - ixgb_bus_speed_reserved -} ixgb_bus_speed; - -/* PCI bus widths */ -typedef enum { - ixgb_bus_width_unknown = 0, - ixgb_bus_width_32, - ixgb_bus_width_64 -} ixgb_bus_width; - - -#define IXGB_ETH_LENGTH_OF_ADDRESS 6 - -#define IXGB_EEPROM_SIZE 64 /* Size in words */ - -#define SPEED_10000 10000 -#define FULL_DUPLEX 2 - -#define MIN_NUMBER_OF_DESCRIPTORS 8 -#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */ - -#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */ -#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */ -#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */ - -#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */ - /* NOTE: this is MICROSECONDS */ -#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */ - -/* General Registers */ -#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */ -#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */ -#define IXGB_STATUS 0x00010 /* Device Status Register - RO */ -#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */ -#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */ - -/* Interrupt */ -#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */ -#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */ -#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */ -#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */ - -/* Receive */ -#define IXGB_RCTL 0x00100 /* RX Control - RW */ -#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */ -#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */ -#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */ -#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */ -#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */ -#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */ -#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */ -#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */ -#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */ -#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */ -#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */ -#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */ -#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */ -#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */ -#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */ -#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */ -#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8 - -/* Transmit */ -#define IXGB_TCTL 0x00600 /* TX Control - RW */ -#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */ -#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */ -#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */ -#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */ -#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */ -#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */ -#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */ -#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */ -#define IXGB_PAP 0x00640 /* Pause and Pace - RW */ -#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8 - -/* Physical */ -#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */ -#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */ -#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */ -#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */ -#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */ -#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */ -#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */ -#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */ -#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */ -#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */ -#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */ -#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */ -#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */ - -/* Wake-up */ -#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */ -#define IXGB_WUS 0x00810 /* Wake Up Status - RO */ -#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */ -#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */ -#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */ - -/* Statistics */ -#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */ -#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */ -#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */ -#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */ -#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */ -#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */ -#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */ -#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */ -#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */ -#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */ -#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */ -#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */ -#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */ -#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */ -#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */ -#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */ -#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */ -#define IXGB_TORH 0x02044 /* Total Octets Received (High) */ -#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */ -#define IXGB_RUC 0x02050 /* Receive Undersize Count */ -#define IXGB_ROC 0x02058 /* Receive Oversize Count */ -#define IXGB_RLEC 0x02060 /* Receive Length Error Count */ -#define IXGB_CRCERRS 0x02068 /* CRC Error Count */ -#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */ -#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */ -#define IXGB_MPC 0x02080 /* Missed Packets Count */ -#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */ -#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */ -#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */ -#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */ -#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */ -#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */ -#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */ -#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */ -#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */ -#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */ -#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */ -#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */ -#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */ -#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */ -#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */ -#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */ -#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */ -#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */ -#define IXGB_DC 0x02148 /* Defer Count */ -#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */ -#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */ -#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */ -#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */ -#define IXGB_RFC 0x02188 /* Remote Fault Count */ -#define IXGB_LFC 0x02190 /* Local Fault Count */ -#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */ -#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */ -#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */ -#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */ -#define IXGB_XONRXC 0x021B8 /* XON Received Count */ -#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */ -#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */ -#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */ -#define IXGB_RJC 0x021D8 /* Receive Jabber Count */ - - -/* CTRL0 Bit Masks */ -#define IXGB_CTRL0_LRST 0x00000008 -#define IXGB_CTRL0_JFE 0x00000010 -#define IXGB_CTRL0_XLE 0x00000020 -#define IXGB_CTRL0_MDCS 0x00000040 -#define IXGB_CTRL0_CMDC 0x00000080 -#define IXGB_CTRL0_SDP0 0x00040000 -#define IXGB_CTRL0_SDP1 0x00080000 -#define IXGB_CTRL0_SDP2 0x00100000 -#define IXGB_CTRL0_SDP3 0x00200000 -#define IXGB_CTRL0_SDP0_DIR 0x00400000 -#define IXGB_CTRL0_SDP1_DIR 0x00800000 -#define IXGB_CTRL0_SDP2_DIR 0x01000000 -#define IXGB_CTRL0_SDP3_DIR 0x02000000 -#define IXGB_CTRL0_RST 0x04000000 -#define IXGB_CTRL0_RPE 0x08000000 -#define IXGB_CTRL0_TPE 0x10000000 -#define IXGB_CTRL0_VME 0x40000000 - -/* CTRL1 Bit Masks */ -#define IXGB_CTRL1_GPI0_EN 0x00000001 -#define IXGB_CTRL1_GPI1_EN 0x00000002 -#define IXGB_CTRL1_GPI2_EN 0x00000004 -#define IXGB_CTRL1_GPI3_EN 0x00000008 -#define IXGB_CTRL1_SDP4 0x00000010 -#define IXGB_CTRL1_SDP5 0x00000020 -#define IXGB_CTRL1_SDP6 0x00000040 -#define IXGB_CTRL1_SDP7 0x00000080 -#define IXGB_CTRL1_SDP4_DIR 0x00000100 -#define IXGB_CTRL1_SDP5_DIR 0x00000200 -#define IXGB_CTRL1_SDP6_DIR 0x00000400 -#define IXGB_CTRL1_SDP7_DIR 0x00000800 -#define IXGB_CTRL1_EE_RST 0x00002000 -#define IXGB_CTRL1_RO_DIS 0x00020000 -#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000 -#define IXGB_CTRL1_PCIXHM_1_2 0x00000000 -#define IXGB_CTRL1_PCIXHM_5_8 0x00400000 -#define IXGB_CTRL1_PCIXHM_3_4 0x00800000 -#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000 - -/* STATUS Bit Masks */ -#define IXGB_STATUS_LU 0x00000002 -#define IXGB_STATUS_AIP 0x00000004 -#define IXGB_STATUS_TXOFF 0x00000010 -#define IXGB_STATUS_XAUIME 0x00000020 -#define IXGB_STATUS_RES 0x00000040 -#define IXGB_STATUS_RIS 0x00000080 -#define IXGB_STATUS_RIE 0x00000100 -#define IXGB_STATUS_RLF 0x00000200 -#define IXGB_STATUS_RRF 0x00000400 -#define IXGB_STATUS_PCI_SPD 0x00000800 -#define IXGB_STATUS_BUS64 0x00001000 -#define IXGB_STATUS_PCIX_MODE 0x00002000 -#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000 -#define IXGB_STATUS_PCIX_SPD_66 0x00000000 -#define IXGB_STATUS_PCIX_SPD_100 0x00004000 -#define IXGB_STATUS_PCIX_SPD_133 0x00008000 -#define IXGB_STATUS_REV_ID_MASK 0x000F0000 -#define IXGB_STATUS_REV_ID_SHIFT 16 - -/* EECD Bit Masks */ -#define IXGB_EECD_SK 0x00000001 -#define IXGB_EECD_CS 0x00000002 -#define IXGB_EECD_DI 0x00000004 -#define IXGB_EECD_DO 0x00000008 -#define IXGB_EECD_FWE_MASK 0x00000030 -#define IXGB_EECD_FWE_DIS 0x00000010 -#define IXGB_EECD_FWE_EN 0x00000020 - -/* MFS */ -#define IXGB_MFS_SHIFT 16 - -/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */ -#define IXGB_INT_TXDW 0x00000001 -#define IXGB_INT_TXQE 0x00000002 -#define IXGB_INT_LSC 0x00000004 -#define IXGB_INT_RXSEQ 0x00000008 -#define IXGB_INT_RXDMT0 0x00000010 -#define IXGB_INT_RXO 0x00000040 -#define IXGB_INT_RXT0 0x00000080 -#define IXGB_INT_AUTOSCAN 0x00000200 -#define IXGB_INT_GPI0 0x00000800 -#define IXGB_INT_GPI1 0x00001000 -#define IXGB_INT_GPI2 0x00002000 -#define IXGB_INT_GPI3 0x00004000 - -/* RCTL Bit Masks */ -#define IXGB_RCTL_RXEN 0x00000002 -#define IXGB_RCTL_SBP 0x00000004 -#define IXGB_RCTL_UPE 0x00000008 -#define IXGB_RCTL_MPE 0x00000010 -#define IXGB_RCTL_RDMTS_MASK 0x00000300 -#define IXGB_RCTL_RDMTS_1_2 0x00000000 -#define IXGB_RCTL_RDMTS_1_4 0x00000100 -#define IXGB_RCTL_RDMTS_1_8 0x00000200 -#define IXGB_RCTL_MO_MASK 0x00003000 -#define IXGB_RCTL_MO_47_36 0x00000000 -#define IXGB_RCTL_MO_46_35 0x00001000 -#define IXGB_RCTL_MO_45_34 0x00002000 -#define IXGB_RCTL_MO_43_32 0x00003000 -#define IXGB_RCTL_MO_SHIFT 12 -#define IXGB_RCTL_BAM 0x00008000 -#define IXGB_RCTL_BSIZE_MASK 0x00030000 -#define IXGB_RCTL_BSIZE_2048 0x00000000 -#define IXGB_RCTL_BSIZE_4096 0x00010000 -#define IXGB_RCTL_BSIZE_8192 0x00020000 -#define IXGB_RCTL_BSIZE_16384 0x00030000 -#define IXGB_RCTL_VFE 0x00040000 -#define IXGB_RCTL_CFIEN 0x00080000 -#define IXGB_RCTL_CFI 0x00100000 -#define IXGB_RCTL_RPDA_MASK 0x00600000 -#define IXGB_RCTL_RPDA_MC_MAC 0x00000000 -#define IXGB_RCTL_MC_ONLY 0x00400000 -#define IXGB_RCTL_CFF 0x00800000 -#define IXGB_RCTL_SECRC 0x04000000 -#define IXGB_RDT_FPDB 0x80000000 - -#define IXGB_RCTL_IDLE_RX_UNIT 0 - -/* FCRTL Bit Masks */ -#define IXGB_FCRTL_XONE 0x80000000 - -/* RXDCTL Bit Masks */ -#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF -#define IXGB_RXDCTL_PTHRESH_SHIFT 0 -#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00 -#define IXGB_RXDCTL_HTHRESH_SHIFT 9 -#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000 -#define IXGB_RXDCTL_WTHRESH_SHIFT 18 - -/* RAIDC Bit Masks */ -#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F -#define IXGB_RAIDC_DELAY_MASK 0x000FF800 -#define IXGB_RAIDC_DELAY_SHIFT 11 -#define IXGB_RAIDC_POLL_MASK 0x1FF00000 -#define IXGB_RAIDC_POLL_SHIFT 20 -#define IXGB_RAIDC_RXT_GATE 0x40000000 -#define IXGB_RAIDC_EN 0x80000000 - -#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220 -#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244 -#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122 -#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61 - -/* RXCSUM Bit Masks */ -#define IXGB_RXCSUM_IPOFL 0x00000100 -#define IXGB_RXCSUM_TUOFL 0x00000200 - -/* RAH Bit Masks */ -#define IXGB_RAH_ASEL_MASK 0x00030000 -#define IXGB_RAH_ASEL_DEST 0x00000000 -#define IXGB_RAH_ASEL_SRC 0x00010000 -#define IXGB_RAH_AV 0x80000000 - -/* TCTL Bit Masks */ -#define IXGB_TCTL_TCE 0x00000001 -#define IXGB_TCTL_TXEN 0x00000002 -#define IXGB_TCTL_TPDE 0x00000004 - -#define IXGB_TCTL_IDLE_TX_UNIT 0 - -/* TXDCTL Bit Masks */ -#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F -#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00 -#define IXGB_TXDCTL_HTHRESH_SHIFT 8 -#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000 -#define IXGB_TXDCTL_WTHRESH_SHIFT 16 - -/* TSPMT Bit Masks */ -#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF -#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000 -#define IXGB_TSPMT_TSPBP_SHIFT 16 - -/* PAP Bit Masks */ -#define IXGB_PAP_TXPC_MASK 0x0000FFFF -#define IXGB_PAP_TXPV_MASK 0x000F0000 -#define IXGB_PAP_TXPV_10G 0x00000000 -#define IXGB_PAP_TXPV_1G 0x00010000 -#define IXGB_PAP_TXPV_2G 0x00020000 -#define IXGB_PAP_TXPV_3G 0x00030000 -#define IXGB_PAP_TXPV_4G 0x00040000 -#define IXGB_PAP_TXPV_5G 0x00050000 -#define IXGB_PAP_TXPV_6G 0x00060000 -#define IXGB_PAP_TXPV_7G 0x00070000 -#define IXGB_PAP_TXPV_8G 0x00080000 -#define IXGB_PAP_TXPV_9G 0x00090000 -#define IXGB_PAP_TXPV_WAN 0x000F0000 - -/* PCSC1 Bit Masks */ -#define IXGB_PCSC1_LOOPBACK 0x00004000 - -/* PCSC2 Bit Masks */ -#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003 -#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001 - -/* PCSS1 Bit Masks */ -#define IXGB_PCSS1_LOCAL_FAULT 0x00000080 -#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004 - -/* PCSS2 Bit Masks */ -#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000 -#define IXGB_PCSS2_DEV_PRES 0x00004000 -#define IXGB_PCSS2_TX_LF 0x00000800 -#define IXGB_PCSS2_RX_LF 0x00000400 -#define IXGB_PCSS2_10GBW 0x00000004 -#define IXGB_PCSS2_10GBX 0x00000002 -#define IXGB_PCSS2_10GBR 0x00000001 - -/* XPCSS Bit Masks */ -#define IXGB_XPCSS_ALIGN_STATUS 0x00001000 -#define IXGB_XPCSS_PATTERN_TEST 0x00000800 -#define IXGB_XPCSS_LANE_3_SYNC 0x00000008 -#define IXGB_XPCSS_LANE_2_SYNC 0x00000004 -#define IXGB_XPCSS_LANE_1_SYNC 0x00000002 -#define IXGB_XPCSS_LANE_0_SYNC 0x00000001 - -/* XPCSTC Bit Masks */ -#define IXGB_XPCSTC_BERT_TRIG 0x00200000 -#define IXGB_XPCSTC_BERT_SST 0x00100000 -#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000 -#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17 -#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003 -#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001 -#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000 - -/* MSCA bit Masks */ -/* New Protocol Address */ -#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF -#define IXGB_MSCA_NP_ADDR_SHIFT 0 -/* Either Device Type or Register Address,depending on ST_CODE */ -#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000 -#define IXGB_MSCA_DEV_TYPE_SHIFT 16 -#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000 -#define IXGB_MSCA_PHY_ADDR_SHIFT 21 -#define IXGB_MSCA_OP_CODE_MASK 0x0C000000 -/* OP_CODE == 00, Address cycle, New Protocol */ -/* OP_CODE == 01, Write operation */ -/* OP_CODE == 10, Read operation */ -/* OP_CODE == 11, Read, auto increment, New Protocol */ -#define IXGB_MSCA_ADDR_CYCLE 0x00000000 -#define IXGB_MSCA_WRITE 0x04000000 -#define IXGB_MSCA_READ 0x08000000 -#define IXGB_MSCA_READ_AUTOINC 0x0C000000 -#define IXGB_MSCA_OP_CODE_SHIFT 26 -#define IXGB_MSCA_ST_CODE_MASK 0x30000000 -/* ST_CODE == 00, New Protocol */ -/* ST_CODE == 01, Old Protocol */ -#define IXGB_MSCA_NEW_PROTOCOL 0x00000000 -#define IXGB_MSCA_OLD_PROTOCOL 0x10000000 -#define IXGB_MSCA_ST_CODE_SHIFT 28 -/* Initiate command, self-clearing when command completes */ -#define IXGB_MSCA_MDI_COMMAND 0x40000000 -/*MDI In Progress Enable. */ -#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000 - -/* MSRWD bit masks */ -#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF -#define IXGB_MSRWD_WRITE_DATA_SHIFT 0 -#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000 -#define IXGB_MSRWD_READ_DATA_SHIFT 16 - -/* Definitions for the optics devices on the MDIO bus. */ -#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */ - -/* Standard five-bit Device IDs. See IEEE 802.3ae, clause 45 */ -#define MDIO_PMA_PMD_DID 0x01 -#define MDIO_WIS_DID 0x02 -#define MDIO_PCS_DID 0x03 -#define MDIO_XGXS_DID 0x04 - -/* Standard PMA/PMD registers and bit definitions. */ -/* Note: This is a very limited set of definitions, */ -/* only implemented features are defined. */ -#define MDIO_PMA_PMD_CR1 0x0000 -#define MDIO_PMA_PMD_CR1_RESET 0x8000 - -#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */ - -/* Vendor-specific MDIO registers */ -#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */ -#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */ - -#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80 -#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00 -#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */ - -/* Layout of a single receive descriptor. The controller assumes that this - * structure is packed into 16 bytes, which is a safe assumption with most - * compilers. However, some compilers may insert padding between the fields, - * in which case the structure must be packed in some compiler-specific - * manner. */ -struct ixgb_rx_desc { - uint64_t buff_addr; - uint16_t length; - uint16_t reserved; - uint8_t status; - uint8_t errors; - uint16_t special; -}; - -#define IXGB_RX_DESC_STATUS_DD 0x01 -#define IXGB_RX_DESC_STATUS_EOP 0x02 -#define IXGB_RX_DESC_STATUS_IXSM 0x04 -#define IXGB_RX_DESC_STATUS_VP 0x08 -#define IXGB_RX_DESC_STATUS_TCPCS 0x20 -#define IXGB_RX_DESC_STATUS_IPCS 0x40 -#define IXGB_RX_DESC_STATUS_PIF 0x80 - -#define IXGB_RX_DESC_ERRORS_CE 0x01 -#define IXGB_RX_DESC_ERRORS_SE 0x02 -#define IXGB_RX_DESC_ERRORS_P 0x08 -#define IXGB_RX_DESC_ERRORS_TCPE 0x20 -#define IXGB_RX_DESC_ERRORS_IPE 0x40 -#define IXGB_RX_DESC_ERRORS_RXE 0x80 - -#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ - -/* Layout of a single transmit descriptor. The controller assumes that this - * structure is packed into 16 bytes, which is a safe assumption with most - * compilers. However, some compilers may insert padding between the fields, - * in which case the structure must be packed in some compiler-specific - * manner. */ -struct ixgb_tx_desc { - uint64_t buff_addr; - uint32_t cmd_type_len; - uint8_t status; - uint8_t popts; - uint16_t vlan; -}; - -#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF -#define IXGB_TX_DESC_TYPE_MASK 0x00F00000 -#define IXGB_TX_DESC_TYPE_SHIFT 20 -#define IXGB_TX_DESC_CMD_MASK 0xFF000000 -#define IXGB_TX_DESC_CMD_SHIFT 24 -#define IXGB_TX_DESC_CMD_EOP 0x01000000 -#define IXGB_TX_DESC_CMD_TSE 0x04000000 -#define IXGB_TX_DESC_CMD_RS 0x08000000 -#define IXGB_TX_DESC_CMD_VLE 0x40000000 -#define IXGB_TX_DESC_CMD_IDE 0x80000000 - -#define IXGB_TX_DESC_TYPE 0x00100000 - -#define IXGB_TX_DESC_STATUS_DD 0x01 - -#define IXGB_TX_DESC_POPTS_IXSM 0x01 -#define IXGB_TX_DESC_POPTS_TXSM 0x02 -#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */ - -struct ixgb_context_desc { - uint8_t ipcss; - uint8_t ipcso; - uint16_t ipcse; - uint8_t tucss; - uint8_t tucso; - uint16_t tucse; - uint32_t cmd_type_len; - uint8_t status; - uint8_t hdr_len; - uint16_t mss; -}; - -#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000 -#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000 -#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000 -#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000 -#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000 - -#define IXGB_CONTEXT_DESC_TYPE 0x00000000 - -#define IXGB_CONTEXT_DESC_STATUS_DD 0x01 - -/* Filters */ -#define IXGB_RAR_ENTRIES 16 /* Number of entries in Rx Address array */ -#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */ -#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ - -#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0 -#define ENET_HEADER_SIZE 14 -#define ENET_FCS_LENGTH 4 -#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128 -#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60 -#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514 -#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00 - -/* Phy Addresses */ -#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address*/ -#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address*/ -#define IXGB_DIAG_PHY_ADDR 0x1F/* Diagnostic Device phy address*/ - -/* This structure takes a 64k flash and maps it for identification commands */ -struct ixgb_flash_buffer { - uint8_t manufacturer_id; - uint8_t device_id; - uint8_t filler1[0x2AA8]; - uint8_t cmd2; - uint8_t filler2[0x2AAA]; - uint8_t cmd1; - uint8_t filler3[0xAAAA]; -}; - -/* - * This is a little-endian specific check. - */ -#define IS_MULTICAST(Address) \ - (boolean_t)(((uint8_t *)(Address))[0] & ((uint8_t)0x01)) - - -/* - * Check whether an address is broadcast. - */ -#define IS_BROADCAST(Address) \ - ((((uint8_t *)(Address))[0] == ((uint8_t)0xff)) && (((uint8_t *)(Address))[1] == ((uint8_t)0xff))) - -/* Flow control parameters */ -struct ixgb_fc { - uint32_t high_water; /* Flow Control High-water */ - uint32_t low_water; /* Flow Control Low-water */ - uint16_t pause_time; /* Flow Control Pause timer */ - boolean_t send_xon; /* Flow control send XON */ - ixgb_fc_type type; /* Type of flow control */ -}; - -/* The historical defaults for the flow control values are given below. */ -#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */ -#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */ -#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */ - -/* Phy definitions */ -#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF -#define IXGB_MAX_PHY_ADDRESS 31 -#define IXGB_MAX_PHY_DEV_TYPE 31 - -/* Bus parameters */ -struct ixgb_bus { - ixgb_bus_speed speed; - ixgb_bus_width width; - ixgb_bus_type type; -}; - -struct ixgb_hw { - uint8_t *hw_addr; /* Base Address of the hardware */ - void *back; /* Pointer to OS-dependent struct */ - struct ixgb_fc fc; /* Flow control parameters */ - struct ixgb_bus bus; /* Bus parameters */ - uint32_t phy_id; /* Phy Identifier */ - uint32_t phy_addr; /* XGMII address of Phy */ - ixgb_mac_type mac_type; /* Identifier for MAC controller */ - ixgb_phy_type phy_type; /* Transceiver/phy identifier */ - uint32_t max_frame_size; /* Maximum frame size supported */ - uint32_t mc_filter_type; /* Multicast filter hash type */ - uint32_t num_mc_addrs; /* Number of current Multicast addrs*/ - uint8_t curr_mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; /* Individual address currently programmed in MAC */ - uint32_t num_tx_desc; /* Number of Transmit descriptors */ - uint32_t num_rx_desc; /* Number of Receive descriptors */ - uint32_t rx_buffer_size; /* Size of Receive buffer */ - boolean_t link_up; /* TRUE if link is valid */ - boolean_t adapter_stopped; /* State of adapter */ - uint16_t device_id; /* device id from PCI configuration space */ - uint16_t vendor_id; /* vendor id from PCI configuration space */ - uint8_t revision_id; /* revision id from PCI configuration space */ - uint16_t subsystem_vendor_id;/* subsystem vendor id from PCI configuration space */ - uint16_t subsystem_id; /* subsystem id from PCI configuration space */ - uint32_t bar0; /* Base Address registers */ - uint32_t bar1; - uint32_t bar2; - uint32_t bar3; - uint16_t pci_cmd_word; /* PCI command register id from PCI configuration space */ - uint16_t eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */ - unsigned long io_base; /* Our I/O mapped location */ - uint32_t lastLFC; - uint32_t lastRFC; -}; - -/* Statistics reported by the hardware */ -struct ixgb_hw_stats { - uint64_t tprl; - uint64_t tprh; - uint64_t gprcl; - uint64_t gprch; - uint64_t bprcl; - uint64_t bprch; - uint64_t mprcl; - uint64_t mprch; - uint64_t uprcl; - uint64_t uprch; - uint64_t vprcl; - uint64_t vprch; - uint64_t jprcl; - uint64_t jprch; - uint64_t gorcl; - uint64_t gorch; - uint64_t torl; - uint64_t torh; - uint64_t rnbc; - uint64_t ruc; - uint64_t roc; - uint64_t rlec; - uint64_t crcerrs; - uint64_t icbc; - uint64_t ecbc; - uint64_t mpc; - uint64_t tptl; - uint64_t tpth; - uint64_t gptcl; - uint64_t gptch; - uint64_t bptcl; - uint64_t bptch; - uint64_t mptcl; - uint64_t mptch; - uint64_t uptcl; - uint64_t uptch; - uint64_t vptcl; - uint64_t vptch; - uint64_t jptcl; - uint64_t jptch; - uint64_t gotcl; - uint64_t gotch; - uint64_t totl; - uint64_t toth; - uint64_t dc; - uint64_t plt64c; - uint64_t tsctc; - uint64_t tsctfc; - uint64_t ibic; - uint64_t rfc; - uint64_t lfc; - uint64_t pfrc; - uint64_t pftc; - uint64_t mcfrc; - uint64_t mcftc; - uint64_t xonrxc; - uint64_t xontxc; - uint64_t xoffrxc; - uint64_t xofftxc; - uint64_t rjc; -}; - -/* Function Prototypes */ -extern boolean_t ixgb_adapter_stop(struct ixgb_hw *hw); -extern boolean_t ixgb_init_hw(struct ixgb_hw *hw); -extern boolean_t ixgb_adapter_start(struct ixgb_hw *hw); -extern void ixgb_init_rx_addrs(struct ixgb_hw *hw); -extern void ixgb_check_for_link(struct ixgb_hw *hw); -extern boolean_t ixgb_check_for_bad_link(struct ixgb_hw *hw); -extern boolean_t ixgb_setup_fc(struct ixgb_hw *hw); -extern void ixgb_clear_hw_cntrs(struct ixgb_hw *hw); -extern boolean_t mac_addr_valid(uint8_t *mac_addr); - -extern uint16_t ixgb_read_phy_reg(struct ixgb_hw *hw, - uint32_t reg_addr, - uint32_t phy_addr, - uint32_t device_type); - -extern void ixgb_write_phy_reg(struct ixgb_hw *hw, - uint32_t reg_addr, - uint32_t phy_addr, - uint32_t device_type, - uint16_t data); - -extern void ixgb_rar_set(struct ixgb_hw *hw, - uint8_t *addr, - uint32_t index); - - -/* Filters (multicast, vlan, receive) */ -extern void ixgb_mc_addr_list_update(struct ixgb_hw *hw, - uint8_t * mc_addr_list, - uint32_t mc_addr_count, - uint32_t pad); - -/* Vfta functions */ -extern void ixgb_write_vfta(struct ixgb_hw *hw, - uint32_t offset, - uint32_t value); - -extern void ixgb_clear_vfta(struct ixgb_hw *hw); - - -/* Access functions to eeprom data */ -void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr); -uint16_t ixgb_get_ee_compatibility(struct ixgb_hw *hw); -uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_subsystem_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_subvendor_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_vendor_id(struct ixgb_hw *hw); -uint16_t ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw); -uint8_t ixgb_get_ee_d3_power(struct ixgb_hw *hw); -uint8_t ixgb_get_ee_d0_power(struct ixgb_hw *hw); -boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw); -uint16_t ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index); - -/* Everything else */ -void ixgb_led_on(struct ixgb_hw *hw); -void ixgb_led_off(struct ixgb_hw *hw); -void ixgb_write_pci_cfg(struct ixgb_hw *hw, - uint32_t reg, - uint16_t * value); - - -#endif /* _IXGB_HW_H_ */ diff --git a/sys/dev/ixgb/ixgb_ids.h b/sys/dev/ixgb/ixgb_ids.h deleted file mode 100644 index d7db0ac68370..000000000000 --- a/sys/dev/ixgb/ixgb_ids.h +++ /dev/null @@ -1,58 +0,0 @@ -/******************************************************************************* - SPDX-License-Identifier: BSD-3-Clause - - Copyright (c) 2001-2004, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/*$FreeBSD$*/ - -#ifndef _IXGB_IDS_H_ -#define _IXGB_IDS_H_ - -/********************************************************************** -** The Device IDs for 10 Gigabit MACs -**********************************************************************/ - -#define IXGB_DEVICE_ID_82597EX 0x1048 /* Cibolo A1, -LR (1310nm) */ -#define IXGB_DEVICE_ID_82597EX_SR 0x1A48 /* Cibolo B0, -SR (850nm) */ - -#define IXGB_SUBDEVICE_ID_A11F 0xA11F /* Adapter-OEM-1310nm-Fiber */ -#define IXGB_SUBDEVICE_ID_A01F 0xA01F /* Adapter-Retail-1310nm-Fiber */ - -#define IXGB_SUBDEVICE_ID_A15F 0xA15F /* Adapter-OEM-850nm-Fiber */ -#define IXGB_SUBDEVICE_ID_A05F 0xA05F /* Adapter-Retail-850nm-Fiber */ - -#define IXGB_SUBDEVICE_ID_A12F 0xA12F /* Adapter-OEM-1310nm-Fiber */ -#define IXGB_SUBDEVICE_ID_A02F 0xA02F /* Adapter-Retail-1310nm-Fiber */ - -#endif /* #ifndef _IXGB_IDS_H_ */ - -/* End of File */ diff --git a/sys/i386/conf/GENERIC b/sys/i386/conf/GENERIC index be6698cbb999..fcd3644f3956 100644 --- a/sys/i386/conf/GENERIC +++ b/sys/i386/conf/GENERIC @@ -230,7 +230,6 @@ device puc # Multi I/O cards and multi-channel UARTs device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 Gigabit Ethernet Family -device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') diff --git a/sys/modules/Makefile b/sys/modules/Makefile index 1cff574188f5..0d9113a1c1bb 100644 --- a/sys/modules/Makefile +++ b/sys/modules/Makefile @@ -203,7 +203,6 @@ SUBDIR= \ ${_iwnfw} \ ${_ix} \ ${_ixv} \ - ${_ixgb} \ ${_ixl} \ ${_ixlv} \ jme \ @@ -666,7 +665,6 @@ _ipw= ipw _iwi= iwi _iwm= iwm _iwn= iwn -_ixgb= ixgb .if ${MK_SOURCELESS_UCODE} != "no" _ipwfw= ipwfw _iwifw= iwifw diff --git a/sys/modules/ixgb/Makefile b/sys/modules/ixgb/Makefile deleted file mode 100644 index 31877a9f0edc..000000000000 --- a/sys/modules/ixgb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -#$FreeBSD$ - -.PATH: ${SRCTOP}/sys/dev/ixgb - -KMOD= if_ixgb -SRCS= if_ixgb.c ixgb_hw.c ixgb_ee.c -SRCS+= device_if.h bus_if.h pci_if.h - -.include diff --git a/sys/netpfil/pf/pf.c b/sys/netpfil/pf/pf.c index b51bd3c16dbc..d7951a9dd8fc 100644 --- a/sys/netpfil/pf/pf.c +++ b/sys/netpfil/pf/pf.c @@ -5727,8 +5727,7 @@ pf_route6(struct mbuf **m, struct pf_rule *r, int dir, struct ifnet *oifp, /* * FreeBSD supports cksum offloads for the following drivers. - * em(4), fxp(4), ixgb(4), lge(4), ndis(4), nge(4), re(4), - * ti(4), txp(4), xl(4) + * em(4), fxp(4), lge(4), ndis(4), nge(4), re(4), ti(4), txp(4), xl(4) * * CSUM_DATA_VALID | CSUM_PSEUDO_HDR : * network driver performed cksum including pseudo header, need to verify diff --git a/sys/sparc64/conf/GENERIC b/sys/sparc64/conf/GENERIC index 92416c04f4a0..019275db5c66 100644 --- a/sys/sparc64/conf/GENERIC +++ b/sys/sparc64/conf/GENERIC @@ -177,7 +177,6 @@ device uart # Multi-uart driver # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -#device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device ti # Alteon Networks Tigon I/II gigabit Ethernet device txp # 3Com 3cR990 (``Typhoon'') diff --git a/tools/kerneldoc/subsys/Doxyfile-dev_ixgb b/tools/kerneldoc/subsys/Doxyfile-dev_ixgb deleted file mode 100644 index 2d35441f6e98..000000000000 --- a/tools/kerneldoc/subsys/Doxyfile-dev_ixgb +++ /dev/null @@ -1,21 +0,0 @@ -# Doxyfile 1.5.2 - -# $FreeBSD$ - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- -PROJECT_NAME = "FreeBSD kernel IXGB device code" -OUTPUT_DIRECTORY = $(DOXYGEN_DEST_PATH)/dev_ixgb/ -EXTRACT_ALL = YES # for undocumented src, no warnings enabled -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- -INPUT = $(DOXYGEN_SRC_PATH)/dev/ixgb/ \ - $(NOTREVIEWED) - -GENERATE_TAGFILE = dev_ixgb/dev_ixgb.tag - -@INCLUDE_PATH = $(DOXYGEN_INCLUDE_PATH) -@INCLUDE = common-Doxyfile - diff --git a/tools/tools/tinybsd/conf/bridge/TINYBSD b/tools/tools/tinybsd/conf/bridge/TINYBSD index 6faf082dd92e..0788aea40e44 100644 --- a/tools/tools/tinybsd/conf/bridge/TINYBSD +++ b/tools/tools/tinybsd/conf/bridge/TINYBSD @@ -80,7 +80,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/tools/tools/tinybsd/conf/default/TINYBSD b/tools/tools/tinybsd/conf/default/TINYBSD index aba05c5bcfc5..6052764b3f81 100644 --- a/tools/tools/tinybsd/conf/default/TINYBSD +++ b/tools/tools/tinybsd/conf/default/TINYBSD @@ -90,7 +90,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/tools/tools/tinybsd/conf/firewall/TINYBSD b/tools/tools/tinybsd/conf/firewall/TINYBSD index eb9b92a9dbe6..f410c139e371 100644 --- a/tools/tools/tinybsd/conf/firewall/TINYBSD +++ b/tools/tools/tinybsd/conf/firewall/TINYBSD @@ -79,7 +79,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/tools/tools/tinybsd/conf/vpn/TINYBSD b/tools/tools/tinybsd/conf/vpn/TINYBSD index 7e6da0edf1e0..956c13b00413 100644 --- a/tools/tools/tinybsd/conf/vpn/TINYBSD +++ b/tools/tools/tinybsd/conf/vpn/TINYBSD @@ -80,7 +80,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/tools/tools/tinybsd/conf/wireless/TINYBSD b/tools/tools/tinybsd/conf/wireless/TINYBSD index 8b3f843941e0..aa7ddceb7895 100644 --- a/tools/tools/tinybsd/conf/wireless/TINYBSD +++ b/tools/tools/tinybsd/conf/wireless/TINYBSD @@ -80,7 +80,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card -#device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/tools/tools/tinybsd/conf/wrap/TINYBSD b/tools/tools/tinybsd/conf/wrap/TINYBSD index d04b0659c4e5..c3ce7954b278 100644 --- a/tools/tools/tinybsd/conf/wrap/TINYBSD +++ b/tools/tools/tinybsd/conf/wrap/TINYBSD @@ -48,7 +48,6 @@ device sio # 8250, 16[45]50 based serial ports # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') diff --git a/usr.sbin/bsdconfig/share/device.subr b/usr.sbin/bsdconfig/share/device.subr index 4662b81443cb..ca71e9e503d2 100644 --- a/usr.sbin/bsdconfig/share/device.subr +++ b/usr.sbin/bsdconfig/share/device.subr @@ -1321,7 +1321,6 @@ f_network "ipw%d" "Intel PRO/Wireless 2100 IEEE 802.11 adapter" f_network "iwi%d" "Intel PRO/Wireless 2200BG/2225BG/2915ABG adapter" f_network "iwn%d" "Intel Wireless WiFi Link 4965AGN IEEE 802.11n adapter" f_network "ix%d" "Intel Etherexpress Ethernet card" -f_network "ixgb%d" "Intel(R) PRO/10Gb Ethernet card" f_network "ixgbe%d" "Intel(R) PRO/10Gb Ethernet card" f_network "jme%d" "JMicron JMC250 Gigabit/JMC260 Fast Ethernet" f_network "kue%d" "Kawasaki LSI USB Ethernet adapter"