d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update references to 'device' entries for the kernel config

Browse Source 
files to use 5.x syntax (I hope..)

Note: I suppose one might need to hack the hints file as well?

Submitted by:	Mike Barcroft <mike@FreeBSD.ORG>, Bruce Mah <bmah@FreeBSD.ORG>
This commit is contained in:
Wilko Bulte 2001-10-08 20:33:46 +00:00
parent a3490d55d1
commit 275d9b59d3
1 changed files with 16 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
release/doc/en_US.ISO8859-1/hardware/alpha/proc-alpha.sgml
View File

@ -374,7 +374,9 @@
<para>The IDE interface is supported by &os; and requires a
line in the kernel configuration file as follows:</para>
<programlisting>device ata0 at isa? port IO_WD1 irq 14</programlisting>
<programlisting>device ata</programlisting>
<para>The ATA interface uses irq 14.</para>
<para>The SRM console unfortunately <emphasis> cannot boot</emphasis>
from IDE disks. This means you will have to use a SCSI disk as
@ -552,7 +554,10 @@ cpu EV4</programlisting>
kernel configuration file as follows for the Crystal CS4231
chip:</para>
<programlisting>device pcm0 at isa? port 0x530 irq 9 drq 3 flags 0x15</programlisting>
<programlisting>device pcm</programlisting>
<para>The sound device lives at port 0x530, and uses irq 9 along
with drq 3. You also need to specify flags 0x15 in the hints file.</para>
<para>I have not yet been successful in getting my Multia with
the AD1848 to play any sound.</para>
@ -578,7 +583,9 @@ cpu EV4</programlisting>
IDE disk. This requires a line in the kernel configuration file
as follows:</para>
<programlisting>device ata0 at isa? port IO_WD1 irq 14</programlisting>
<programlisting>device ata</programlisting>
<para>The ATA interface uses IRQ 14.</para>
<para>The IDE connector pin spacing is thought for 2.5&quot; laptop
disks. A 3.5&quot; IDE disk would not fit in the case anyway. At
@ -809,8 +816,8 @@ Jan 3 12:22:32 miata /kernel: pcib0: &lt;2117x PCI host bus adapter&gt; on cia0
<para>Both MX5 and MiataGL have an on-board sound chip, an
ESS1888. It emulates a SoundBlaster and can be enabled by
putting</para>
<programlisting>device pcm0
device sbc0</programlisting>
<programlisting>device pcm
device sbc</programlisting>
<para>in your kernel configuration file:</para>
<para>in case your Miata has the optional cache board
@ -1489,7 +1496,10 @@ cpu EV5</programlisting>
<para>The AS200 & AS250 sound hardware is reported to work OK assuming
you have the following line in your kernel config file:</para>
<programlisting>device pcm0 at isa? port 0x530 irq 9 drq 0 flags 0x10011</programlisting>
<programlisting>device pcm</programlisting>
<para>The sound device uses port 0x530, IRQ 9 and drq 0. You also need
to specify flags 0x10011 in the hints file.</para>
<para>AlphaStation 200 & 250 series have an automatic SCSI terminator.
This means that as soon as you plug a cable onto the external SCSI