Eliminate an intermediate buffer and some memcpy() operations, and do

DMA directly to/from the buffers passed in from higher layer drivers.

Reviewed by:	gonzo
This commit is contained in:
ian 2013-03-17 16:31:09 +00:00
parent b36b09239d
commit 2a3e1335af

View File

@ -122,9 +122,7 @@ struct bcm_sdhci_softc {
int sc_dma_ch;
bus_dma_tag_t sc_dma_tag;
bus_dmamap_t sc_dma_map;
void *sc_dma_buffer;
vm_paddr_t sc_dma_buffer_phys;
vm_paddr_t sc_sdhci_buffer_phys;;
vm_paddr_t sc_sdhci_buffer_phys;
};
static int bcm_sdhci_probe(device_t);
@ -171,8 +169,6 @@ bcm_sdhci_attach(device_t dev)
phandle_t node;
pcell_t cell;
int default_freq;
void *buffer;
vm_paddr_t buffer_phys;
sc->sc_dev = dev;
sc->sc_req = NULL;
@ -209,7 +205,7 @@ bcm_sdhci_attach(device_t dev)
goto fail;
}
if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, bcm_sdhci_intr, sc, &sc->sc_intrhand))
{
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
@ -242,7 +238,7 @@ bcm_sdhci_attach(device_t dev)
bcm_dma_setup_intr(sc->sc_dma_ch, bcm_sdhci_dma_intr, sc);
/* Allocate DMA buffers */
/* Allocate bus_dma resources. */
err = bus_dma_tag_create(bus_get_dma_tag(dev),
1, 0, BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR, NULL, NULL,
@ -255,34 +251,12 @@ bcm_sdhci_attach(device_t dev)
goto fail;
}
err = bus_dmamem_alloc(sc->sc_dma_tag, &buffer,
BUS_DMA_WAITOK | BUS_DMA_COHERENT| BUS_DMA_ZERO,
&sc->sc_dma_map);
err = bus_dmamap_create(sc->sc_dma_tag, 0, &sc->sc_dma_map);
if (err) {
device_printf(dev, "cannot allocate DMA memory\n");
device_printf(dev, "bus_dmamap_create failed\n");
goto fail;
}
err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, buffer,
BCM_SDHCI_BUFFER_SIZE, bcm_dmamap_cb, &buffer_phys,
BUS_DMA_WAITOK);
if (err) {
device_printf(dev, "cannot load DMA memory\n");
goto fail;
}
/*
* Sanity check: two least bits of address should be zero
*/
if ((uintptr_t)buffer & 3) {
device_printf(dev,
"DMA address is not word-aligned\n");
goto fail;
}
sc->sc_dma_buffer = buffer;
sc->sc_dma_buffer_phys = buffer_phys;
sc->sc_sdhci_buffer_phys = BUS_SPACE_PHYSADDR(sc->sc_mem_res,
SDHCI_BUFFER);
@ -445,27 +419,23 @@ bcm_sdhci_dma_intr(int ch, void *arg)
struct bcm_sdhci_softc *sc = (struct bcm_sdhci_softc *)arg;
struct sdhci_slot *slot = &sc->sc_slot;
uint32_t reg, mask;
void *buffer;
bus_addr_t pmem;
vm_paddr_t pdst, psrc;
size_t len;
int left;
int left, sync_op;
mtx_lock(&slot->mtx);
/* copy DMA buffer to VA if READ */
len = bcm_dma_length(sc->sc_dma_ch);
if (slot->curcmd->data->flags & MMC_DATA_READ) {
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map,
BUS_DMASYNC_POSTREAD);
sync_op = BUS_DMASYNC_POSTREAD;
mask = SDHCI_INT_DATA_AVAIL;
/* all dma data in single or contiguous page */
buffer = (uint8_t*)(slot->curcmd->data->data) + slot->offset;
memcpy(buffer, sc->sc_dma_buffer, len);
} else {
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map,
BUS_DMASYNC_POSTWRITE);
sync_op = BUS_DMASYNC_POSTWRITE;
mask = SDHCI_INT_SPACE_AVAIL;
}
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map, sync_op);
bus_dmamap_unload(sc->sc_dma_tag, sc->sc_dma_map);
slot->offset += len;
sc->sc_dma_inuse = 0;
@ -499,27 +469,22 @@ bcm_sdhci_dma_intr(int ch, void *arg)
SDHCI_INT_STATUS, mask);
/* continue next DMA transfer */
bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map,
(uint8_t *)slot->curcmd->data->data +
slot->offset, left, bcm_dmamap_cb, &pmem, 0);
if (slot->curcmd->data->flags & MMC_DATA_READ) {
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map,
BUS_DMASYNC_PREREAD);
/* DMA start */
if (bcm_dma_start(sc->sc_dma_ch,
sc->sc_sdhci_buffer_phys,
sc->sc_dma_buffer_phys, left) != 0)
device_printf(sc->sc_dev, "failed DMA start\n");
psrc = sc->sc_sdhci_buffer_phys;
pdst = pmem;
sync_op = BUS_DMASYNC_PREREAD;
} else {
buffer = (char*)slot->curcmd->data->data + slot->offset;
memcpy(sc->sc_dma_buffer, buffer, left);
bus_dmamap_sync(sc->sc_dma_tag,
sc->sc_dma_map, BUS_DMASYNC_PREWRITE);
/* DMA start */
if (bcm_dma_start(sc->sc_dma_ch,
sc->sc_dma_buffer_phys,
sc->sc_sdhci_buffer_phys, left) != 0)
device_printf(sc->sc_dev, "failed DMA start\n");
psrc = pmem;
pdst = sc->sc_sdhci_buffer_phys;
sync_op = BUS_DMASYNC_PREWRITE;
}
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map, sync_op);
if (bcm_dma_start(sc->sc_dma_ch, psrc, pdst, left)) {
/* XXX stop xfer, other error recovery? */
device_printf(sc->sc_dev, "failed DMA start\n");
}
} else {
/* wait for next data by INT */
@ -540,6 +505,7 @@ bcm_sdhci_read_dma(struct sdhci_slot *slot)
{
struct bcm_sdhci_softc *sc = device_get_softc(slot->bus);
size_t left;
bus_addr_t paddr;
if (sc->sc_dma_inuse) {
device_printf(sc->sc_dev, "DMA in use\n");
@ -560,12 +526,16 @@ bcm_sdhci_read_dma(struct sdhci_slot *slot)
BCM_DMA_INC_ADDR,
(left & 0xf) ? BCM_DMA_32BIT : BCM_DMA_128BIT);
bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map,
(uint8_t *)slot->curcmd->data->data + slot->offset, left,
bcm_dmamap_cb, &paddr, 0);
bus_dmamap_sync(sc->sc_dma_tag, sc->sc_dma_map,
BUS_DMASYNC_PREREAD);
/* DMA start */
if (bcm_dma_start(sc->sc_dma_ch, sc->sc_sdhci_buffer_phys,
sc->sc_dma_buffer_phys, left) != 0)
paddr, left) != 0)
device_printf(sc->sc_dev, "failed DMA start\n");
}
@ -573,8 +543,8 @@ static void
bcm_sdhci_write_dma(struct sdhci_slot *slot)
{
struct bcm_sdhci_softc *sc = device_get_softc(slot->bus);
char *buffer;
size_t left;
bus_addr_t paddr;
if (sc->sc_dma_inuse) {
device_printf(sc->sc_dev, "DMA in use\n");
@ -589,8 +559,9 @@ bcm_sdhci_write_dma(struct sdhci_slot *slot)
KASSERT((left & 3) == 0,
("%s: len = %d, not word-aligned", __func__, left));
buffer = (char*)slot->curcmd->data->data + slot->offset;
memcpy(sc->sc_dma_buffer, buffer, left);
bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map,
(uint8_t *)slot->curcmd->data->data + slot->offset, left,
bcm_dmamap_cb, &paddr, 0);
bcm_dma_setup_src(sc->sc_dma_ch, BCM_DMA_DREQ_NONE,
BCM_DMA_INC_ADDR,
@ -602,7 +573,7 @@ bcm_sdhci_write_dma(struct sdhci_slot *slot)
BUS_DMASYNC_PREWRITE);
/* DMA start */
if (bcm_dma_start(sc->sc_dma_ch, sc->sc_dma_buffer_phys,
if (bcm_dma_start(sc->sc_dma_ch, paddr,
sc->sc_sdhci_buffer_phys, left) != 0)
device_printf(sc->sc_dev, "failed DMA start\n");
}
@ -612,11 +583,16 @@ bcm_sdhci_will_handle_transfer(device_t dev, struct sdhci_slot *slot)
{
size_t left;
/* Do not use DMA for transfers less then block size */
/*
* Do not use DMA for transfers less than block size or with a length
* that is not a multiple of four.
*/
left = min(BCM_DMA_BLOCK_SIZE,
slot->curcmd->data->len - slot->offset);
if (left < BCM_DMA_BLOCK_SIZE)
return (0);
if (left & 0x03)
return (0);
return (1);
}