d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Finally implement bus_config_intr() support for I/O APIC interrupt sources.

Browse Source 
This should fix problems with older SMP systems that only have ISA/EISA
IRQs when routing virgin PCI interrupts as well as on other boxes whose
MADT does not have any interrupt override entries for ISA IRQs that are
used to route PCI interrupts even in APIC mode.
This commit is contained in:
John Baldwin 2004-06-23 18:11:33 +00:00
parent a7cd01df0e
commit 2fc3727323
1 changed files with 27 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

47
sys/i386/i386/io_apic.c
View File

@ -403,32 +403,39 @@ ioapic_config_intr(struct intsrc *isrc, enum intr_trigger trig,
{
struct ioapic_intsrc *intpin = (struct ioapic_intsrc *)isrc;
struct ioapic *io = (struct ioapic *)isrc->is_pic;
int changed;
KASSERT(!(trig == INTR_TRIGGER_CONFORM || pol == INTR_POLARITY_CONFORM),
("%s: Conforming trigger or polarity\n", __func__));
/*
* For now we ignore any requests but do output any changes that
* would be made to the console it bootverbose is enabled. The only
* known causes of these messages so far is a bug in acpi(4) that
* causes the ISA IRQs used for PCI interrupts in PIC mode to be
* set to level/low when they aren't being used. There are possibly
* legitimate requests, so at some point when the acpi(4) driver is
* fixed this code can be changed to actually change the intpin as
* requested.
* EISA interrupts always use active high polarity, so don't allow
* them to be set to active low.
*
* XXX: Should we write to the ELCR if the trigger mode changes for
* an EISA IRQ?
*/
if (!bootverbose)
return (0);
if (intpin->io_edgetrigger != (trig == INTR_TRIGGER_EDGE))
printf(
"ioapic%u: Request to change trigger for pin %u to %s ignored\n",
io->io_id, intpin->io_intpin, trig == INTR_TRIGGER_EDGE ?
"edge" : "level");
if (intpin->io_activehi != (pol == INTR_POLARITY_HIGH))
printf(
"ioapic%u: Request to change polarity for pin %u to %s ignored\n",
io->io_id, intpin->io_intpin, pol == INTR_POLARITY_HIGH ?
"high" : "low");
if (intpin->io_bus == APIC_BUS_EISA)
pol = INTR_POLARITY_HIGH;
changed = 0;
if (intpin->io_edgetrigger != (trig == INTR_TRIGGER_EDGE)) {
if (bootverbose)
printf("ioapic%u: Changing trigger for pin %u to %s\n",
io->io_id, intpin->io_intpin,
trig == INTR_TRIGGER_EDGE ? "edge" : "level");
intpin->io_edgetrigger = (trig == INTR_TRIGGER_EDGE);
changed++;
}
if (intpin->io_activehi != (pol == INTR_POLARITY_HIGH)) {
if (bootverbose)
printf("ioapic%u: Changing polarity for pin %u to %s\n",
io->io_id, intpin->io_intpin,
pol == INTR_POLARITY_HIGH ? "high" : "low");
intpin->io_activehi = (pol == INTR_POLARITY_HIGH);
changed++;
}
if (changed)
ioapic_program_intpin(intpin);
return (0);
}