Updated for not-so-new version of Cyclom-Y boards (with 60MHz clock and
swapped RTS/DTR). Merge the vendor's modification of the 2.2.6-release version into -current for reference. Will be cleaned up in next commit. Obtained from: ftp://ftp.cyclades.com/pub/cyclades/cyclom-y/freebsd/2.2.6/cyy226.tar.gz
This commit is contained in:
bde
parent
f6b94f030e
commit
41c7b6c82e
162
sys/dev/cy/cy.c
162
sys/dev/cy/cy.c
@ -27,7 +27,7 @@
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: cy.c,v 1.65 1998/07/29 18:48:20 bde Exp $
|
||||
* $Id: cy.c,v 1.66 1998/08/11 17:01:32 bde Exp $
|
||||
*/
|
||||
|
||||
#include "opt_compat.h"
|
||||
@ -272,6 +272,7 @@ struct com_s {
|
||||
|
||||
int cy_align; /* index for register alignment */
|
||||
cy_addr cy_iobase; /* base address of this port's cyclom */
|
||||
int cy_rflow; /* rflow flag */
|
||||
cy_addr iobase; /* base address of this port's cd1400 */
|
||||
|
||||
struct tty *tp; /* cross reference */
|
||||
@ -344,7 +345,7 @@ static int comparam __P((struct tty *tp, struct termios *t));
|
||||
static swihand_t siopoll;
|
||||
static int sioprobe __P((struct isa_device *dev));
|
||||
static void siosettimeout __P((void));
|
||||
static int comspeed __P((speed_t speed, int *prescaler_io));
|
||||
static int comspeed __P((speed_t speed, long clock, int *prescaler_io));
|
||||
static void comstart __P((struct tty *tp));
|
||||
static timeout_t comwakeup;
|
||||
static void disc_optim __P((struct tty *tp, struct termios *t,
|
||||
@ -536,9 +537,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
+ (cy_chip_offset[cyu] << cy_align));
|
||||
|
||||
/* Set up a receive timeout period of than 1+ ms. */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align,
|
||||
howmany(CY_CLOCK / CD1400_PPR_PRESCALER, 1000));
|
||||
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >= CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_60_1MS);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_25_1MS);
|
||||
}
|
||||
|
||||
for (cdu = 0; cdu < CD1400_NO_OF_CHANNELS; ++cdu, ++unit) {
|
||||
struct com_s *com;
|
||||
int s;
|
||||
@ -557,6 +562,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
|
||||
com->cy_align = cy_align;
|
||||
com->cy_iobase = cy_iobase;
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >=
|
||||
CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
com->cy_rflow = 1;
|
||||
} else {
|
||||
com->cy_rflow = 0;
|
||||
}
|
||||
com->iobase = iobase;
|
||||
|
||||
/*
|
||||
@ -1102,14 +1114,24 @@ siointr(unit)
|
||||
ioptr[CE_INPUT_OFFSET] = line_status;
|
||||
com->iptr = ++ioptr;
|
||||
if (ioptr == com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
&& com->state & CS_RTS_IFLOW) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
if (line_status & LSR_OE)
|
||||
CE_RECORD(com, CE_OVERRUN);
|
||||
}
|
||||
@ -1165,8 +1187,17 @@ siointr(unit)
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
com_events += count;
|
||||
do {
|
||||
@ -1602,8 +1633,9 @@ repeat:
|
||||
* there is room in the high-level buffer.
|
||||
*/
|
||||
if ((com->state & CS_RTS_IFLOW)
|
||||
&& !(com->mcr_image & MCR_RTS)
|
||||
&& !(tp->t_state & TS_TBLOCK))
|
||||
&& (com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& !(tp->t_state & TS_TBLOCK)) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
@ -1611,9 +1643,15 @@ repeat:
|
||||
iobase = com->iobase,
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align,
|
||||
unit & CD1400_CAR_CHAN),
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
(com->cy_rflow ?
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_DTR) :
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_RTS));
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
com->ibuf = ibuf;
|
||||
}
|
||||
@ -1716,25 +1754,35 @@ comparam(tp, t)
|
||||
u_char opt;
|
||||
int s;
|
||||
int unit;
|
||||
long cy_clock;
|
||||
|
||||
/* do historical conversions */
|
||||
if (t->c_ispeed == 0)
|
||||
t->c_ispeed = t->c_ospeed;
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
unit = DEV_TO_UNIT(tp->t_dev);
|
||||
com = com_addr(unit);
|
||||
iobase = com->iobase;
|
||||
s = spltty();
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align, unit & CD1400_CAR_CHAN);
|
||||
|
||||
/* Set Clock Reference */
|
||||
if (cd_inb(iobase, CD1400_GFRCR, com->cy_align) == CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cy_clock = CY_CLOCK_60;
|
||||
} else {
|
||||
cy_clock = CY_CLOCK_25;
|
||||
}
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, cy_clock, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, cy_clock, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
if (odivisor == 0)
|
||||
(void)commctl(com, TIOCM_DTR, DMBIC); /* hang up line */
|
||||
else
|
||||
@ -2002,8 +2050,13 @@ comparam(tp, t)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -2085,21 +2138,35 @@ comstart(tp)
|
||||
com->intr_enable |= CD1400_SRER_TXRDY);
|
||||
}
|
||||
if (tp->t_state & TS_TBLOCK) {
|
||||
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
|
||||
if ((com->cy_rflow ? (com->mcr_image & MCR_DTR) :
|
||||
(com->mcr_image & MCR_RTS))
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image &= ~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater
|
||||
if ((com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& com->iptr < com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
@ -2244,11 +2311,13 @@ commctl(com, bits, how)
|
||||
if (com->channel_control & CD1400_CCR_RCVEN)
|
||||
bits |= TIOCM_LE;
|
||||
mcr = com->mcr_image;
|
||||
if (mcr & MCR_DTR)
|
||||
if ((com->cy_rflow ? mcr & MCR_RTS : mcr & MCR_DTR)) {
|
||||
bits |= TIOCM_DTR;
|
||||
if (mcr & MCR_RTS)
|
||||
}
|
||||
if ((com->cy_rflow ? mcr & MCR_DTR : mcr & MCR_RTS)) {
|
||||
/* XXX wired on for Cyclom-8Ys */
|
||||
bits |= TIOCM_RTS;
|
||||
}
|
||||
|
||||
/*
|
||||
* We must read the modem status from the hardware because
|
||||
@ -2272,10 +2341,20 @@ commctl(com, bits, how)
|
||||
return (bits);
|
||||
}
|
||||
mcr = 0;
|
||||
if (bits & TIOCM_DTR)
|
||||
mcr |= MCR_DTR;
|
||||
if (bits & TIOCM_RTS)
|
||||
mcr |= MCR_RTS;
|
||||
if (bits & TIOCM_DTR) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_RTS;
|
||||
} else {
|
||||
mcr |= MCR_DTR;
|
||||
}
|
||||
}
|
||||
if (bits & TIOCM_RTS) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_DTR;
|
||||
} else {
|
||||
mcr |= MCR_RTS;
|
||||
}
|
||||
}
|
||||
disable_intr();
|
||||
switch (how) {
|
||||
case DMSET:
|
||||
@ -2452,8 +2531,9 @@ cyinput(c, tp)
|
||||
#endif /* Smarts */
|
||||
|
||||
static int
|
||||
comspeed(speed, prescaler_io)
|
||||
comspeed(speed, clock, prescaler_io)
|
||||
speed_t speed;
|
||||
long clock;
|
||||
int *prescaler_io;
|
||||
{
|
||||
int actual;
|
||||
@ -2470,14 +2550,14 @@ comspeed(speed, prescaler_io)
|
||||
/* determine which prescaler to use */
|
||||
for (prescaler_unit = 4, prescaler = 2048; prescaler_unit;
|
||||
prescaler_unit--, prescaler >>= 2) {
|
||||
if (CY_CLOCK / prescaler / speed > 63)
|
||||
if (clock / prescaler / speed > 63)
|
||||
break;
|
||||
}
|
||||
|
||||
divider = (CY_CLOCK / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
divider = (clock / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
if (divider > 255)
|
||||
divider = 255;
|
||||
actual = CY_CLOCK/prescaler/divider;
|
||||
actual = clock/prescaler/divider;
|
||||
|
||||
/* 10 times error in percent: */
|
||||
error = ((actual - (long)speed) * 2000 / (long)speed + 1) / 2;
|
||||
|
||||
@ -27,7 +27,7 @@
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: cy.c,v 1.65 1998/07/29 18:48:20 bde Exp $
|
||||
* $Id: cy.c,v 1.66 1998/08/11 17:01:32 bde Exp $
|
||||
*/
|
||||
|
||||
#include "opt_compat.h"
|
||||
@ -272,6 +272,7 @@ struct com_s {
|
||||
|
||||
int cy_align; /* index for register alignment */
|
||||
cy_addr cy_iobase; /* base address of this port's cyclom */
|
||||
int cy_rflow; /* rflow flag */
|
||||
cy_addr iobase; /* base address of this port's cd1400 */
|
||||
|
||||
struct tty *tp; /* cross reference */
|
||||
@ -344,7 +345,7 @@ static int comparam __P((struct tty *tp, struct termios *t));
|
||||
static swihand_t siopoll;
|
||||
static int sioprobe __P((struct isa_device *dev));
|
||||
static void siosettimeout __P((void));
|
||||
static int comspeed __P((speed_t speed, int *prescaler_io));
|
||||
static int comspeed __P((speed_t speed, long clock, int *prescaler_io));
|
||||
static void comstart __P((struct tty *tp));
|
||||
static timeout_t comwakeup;
|
||||
static void disc_optim __P((struct tty *tp, struct termios *t,
|
||||
@ -536,9 +537,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
+ (cy_chip_offset[cyu] << cy_align));
|
||||
|
||||
/* Set up a receive timeout period of than 1+ ms. */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align,
|
||||
howmany(CY_CLOCK / CD1400_PPR_PRESCALER, 1000));
|
||||
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >= CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_60_1MS);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_25_1MS);
|
||||
}
|
||||
|
||||
for (cdu = 0; cdu < CD1400_NO_OF_CHANNELS; ++cdu, ++unit) {
|
||||
struct com_s *com;
|
||||
int s;
|
||||
@ -557,6 +562,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
|
||||
com->cy_align = cy_align;
|
||||
com->cy_iobase = cy_iobase;
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >=
|
||||
CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
com->cy_rflow = 1;
|
||||
} else {
|
||||
com->cy_rflow = 0;
|
||||
}
|
||||
com->iobase = iobase;
|
||||
|
||||
/*
|
||||
@ -1102,14 +1114,24 @@ siointr(unit)
|
||||
ioptr[CE_INPUT_OFFSET] = line_status;
|
||||
com->iptr = ++ioptr;
|
||||
if (ioptr == com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
&& com->state & CS_RTS_IFLOW) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
if (line_status & LSR_OE)
|
||||
CE_RECORD(com, CE_OVERRUN);
|
||||
}
|
||||
@ -1165,8 +1187,17 @@ siointr(unit)
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
com_events += count;
|
||||
do {
|
||||
@ -1602,8 +1633,9 @@ repeat:
|
||||
* there is room in the high-level buffer.
|
||||
*/
|
||||
if ((com->state & CS_RTS_IFLOW)
|
||||
&& !(com->mcr_image & MCR_RTS)
|
||||
&& !(tp->t_state & TS_TBLOCK))
|
||||
&& (com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& !(tp->t_state & TS_TBLOCK)) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
@ -1611,9 +1643,15 @@ repeat:
|
||||
iobase = com->iobase,
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align,
|
||||
unit & CD1400_CAR_CHAN),
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
(com->cy_rflow ?
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_DTR) :
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_RTS));
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
com->ibuf = ibuf;
|
||||
}
|
||||
@ -1716,25 +1754,35 @@ comparam(tp, t)
|
||||
u_char opt;
|
||||
int s;
|
||||
int unit;
|
||||
long cy_clock;
|
||||
|
||||
/* do historical conversions */
|
||||
if (t->c_ispeed == 0)
|
||||
t->c_ispeed = t->c_ospeed;
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
unit = DEV_TO_UNIT(tp->t_dev);
|
||||
com = com_addr(unit);
|
||||
iobase = com->iobase;
|
||||
s = spltty();
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align, unit & CD1400_CAR_CHAN);
|
||||
|
||||
/* Set Clock Reference */
|
||||
if (cd_inb(iobase, CD1400_GFRCR, com->cy_align) == CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cy_clock = CY_CLOCK_60;
|
||||
} else {
|
||||
cy_clock = CY_CLOCK_25;
|
||||
}
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, cy_clock, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, cy_clock, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
if (odivisor == 0)
|
||||
(void)commctl(com, TIOCM_DTR, DMBIC); /* hang up line */
|
||||
else
|
||||
@ -2002,8 +2050,13 @@ comparam(tp, t)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -2085,21 +2138,35 @@ comstart(tp)
|
||||
com->intr_enable |= CD1400_SRER_TXRDY);
|
||||
}
|
||||
if (tp->t_state & TS_TBLOCK) {
|
||||
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
|
||||
if ((com->cy_rflow ? (com->mcr_image & MCR_DTR) :
|
||||
(com->mcr_image & MCR_RTS))
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image &= ~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater
|
||||
if ((com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& com->iptr < com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
@ -2244,11 +2311,13 @@ commctl(com, bits, how)
|
||||
if (com->channel_control & CD1400_CCR_RCVEN)
|
||||
bits |= TIOCM_LE;
|
||||
mcr = com->mcr_image;
|
||||
if (mcr & MCR_DTR)
|
||||
if ((com->cy_rflow ? mcr & MCR_RTS : mcr & MCR_DTR)) {
|
||||
bits |= TIOCM_DTR;
|
||||
if (mcr & MCR_RTS)
|
||||
}
|
||||
if ((com->cy_rflow ? mcr & MCR_DTR : mcr & MCR_RTS)) {
|
||||
/* XXX wired on for Cyclom-8Ys */
|
||||
bits |= TIOCM_RTS;
|
||||
}
|
||||
|
||||
/*
|
||||
* We must read the modem status from the hardware because
|
||||
@ -2272,10 +2341,20 @@ commctl(com, bits, how)
|
||||
return (bits);
|
||||
}
|
||||
mcr = 0;
|
||||
if (bits & TIOCM_DTR)
|
||||
mcr |= MCR_DTR;
|
||||
if (bits & TIOCM_RTS)
|
||||
mcr |= MCR_RTS;
|
||||
if (bits & TIOCM_DTR) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_RTS;
|
||||
} else {
|
||||
mcr |= MCR_DTR;
|
||||
}
|
||||
}
|
||||
if (bits & TIOCM_RTS) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_DTR;
|
||||
} else {
|
||||
mcr |= MCR_RTS;
|
||||
}
|
||||
}
|
||||
disable_intr();
|
||||
switch (how) {
|
||||
case DMSET:
|
||||
@ -2452,8 +2531,9 @@ cyinput(c, tp)
|
||||
#endif /* Smarts */
|
||||
|
||||
static int
|
||||
comspeed(speed, prescaler_io)
|
||||
comspeed(speed, clock, prescaler_io)
|
||||
speed_t speed;
|
||||
long clock;
|
||||
int *prescaler_io;
|
||||
{
|
||||
int actual;
|
||||
@ -2470,14 +2550,14 @@ comspeed(speed, prescaler_io)
|
||||
/* determine which prescaler to use */
|
||||
for (prescaler_unit = 4, prescaler = 2048; prescaler_unit;
|
||||
prescaler_unit--, prescaler >>= 2) {
|
||||
if (CY_CLOCK / prescaler / speed > 63)
|
||||
if (clock / prescaler / speed > 63)
|
||||
break;
|
||||
}
|
||||
|
||||
divider = (CY_CLOCK / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
divider = (clock / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
if (divider > 255)
|
||||
divider = 255;
|
||||
actual = CY_CLOCK/prescaler/divider;
|
||||
actual = clock/prescaler/divider;
|
||||
|
||||
/* 10 times error in percent: */
|
||||
error = ((actual - (long)speed) * 2000 / (long)speed + 1) / 2;
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id$
|
||||
* $Id: cyreg.h,v 1.3 1996/10/13 01:09:17 davidg Exp $
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -41,7 +41,13 @@
|
||||
|
||||
#define CY_MAX_CD1400s 8 /* for Cyclom-32Y */
|
||||
|
||||
#define CY_CLOCK 25000000 /* baud rate clock */
|
||||
#define CD1400_REV_G 0x46
|
||||
#define CD1400_REV_J 0x48
|
||||
|
||||
#define CY_CLOCK_25 25000000 /* baud rate clock */
|
||||
#define CY_CLOCK_60 60000000 /* baud rate clock */
|
||||
#define CY_CLOCK_25_1MS 0x31
|
||||
#define CY_CLOCK_60_1MS 0x75
|
||||
|
||||
#ifdef CyDebug
|
||||
#define cd_inb(iobase, reg, cy_align) (++cd_inbs, *((iobase) + ((reg)*2 << (cy_align))))
|
||||
|
||||
@ -27,7 +27,7 @@
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* $Id: cy.c,v 1.65 1998/07/29 18:48:20 bde Exp $
|
||||
* $Id: cy.c,v 1.66 1998/08/11 17:01:32 bde Exp $
|
||||
*/
|
||||
|
||||
#include "opt_compat.h"
|
||||
@ -272,6 +272,7 @@ struct com_s {
|
||||
|
||||
int cy_align; /* index for register alignment */
|
||||
cy_addr cy_iobase; /* base address of this port's cyclom */
|
||||
int cy_rflow; /* rflow flag */
|
||||
cy_addr iobase; /* base address of this port's cd1400 */
|
||||
|
||||
struct tty *tp; /* cross reference */
|
||||
@ -344,7 +345,7 @@ static int comparam __P((struct tty *tp, struct termios *t));
|
||||
static swihand_t siopoll;
|
||||
static int sioprobe __P((struct isa_device *dev));
|
||||
static void siosettimeout __P((void));
|
||||
static int comspeed __P((speed_t speed, int *prescaler_io));
|
||||
static int comspeed __P((speed_t speed, long clock, int *prescaler_io));
|
||||
static void comstart __P((struct tty *tp));
|
||||
static timeout_t comwakeup;
|
||||
static void disc_optim __P((struct tty *tp, struct termios *t,
|
||||
@ -536,9 +537,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
+ (cy_chip_offset[cyu] << cy_align));
|
||||
|
||||
/* Set up a receive timeout period of than 1+ ms. */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align,
|
||||
howmany(CY_CLOCK / CD1400_PPR_PRESCALER, 1000));
|
||||
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >= CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_60_1MS);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_PPR, cy_align, CY_CLOCK_25_1MS);
|
||||
}
|
||||
|
||||
for (cdu = 0; cdu < CD1400_NO_OF_CHANNELS; ++cdu, ++unit) {
|
||||
struct com_s *com;
|
||||
int s;
|
||||
@ -557,6 +562,13 @@ cyattach_common(cy_iobase, cy_align)
|
||||
|
||||
com->cy_align = cy_align;
|
||||
com->cy_iobase = cy_iobase;
|
||||
if (cd_inb(iobase,CD1400_GFRCR, cy_align) >=
|
||||
CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
com->cy_rflow = 1;
|
||||
} else {
|
||||
com->cy_rflow = 0;
|
||||
}
|
||||
com->iobase = iobase;
|
||||
|
||||
/*
|
||||
@ -1102,14 +1114,24 @@ siointr(unit)
|
||||
ioptr[CE_INPUT_OFFSET] = line_status;
|
||||
com->iptr = ++ioptr;
|
||||
if (ioptr == com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
&& com->state & CS_RTS_IFLOW) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
if (line_status & LSR_OE)
|
||||
CE_RECORD(com, CE_OVERRUN);
|
||||
}
|
||||
@ -1165,8 +1187,17 @@ siointr(unit)
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
cy_align,
|
||||
com->mcr_image &=
|
||||
~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
com_events += count;
|
||||
do {
|
||||
@ -1602,8 +1633,9 @@ repeat:
|
||||
* there is room in the high-level buffer.
|
||||
*/
|
||||
if ((com->state & CS_RTS_IFLOW)
|
||||
&& !(com->mcr_image & MCR_RTS)
|
||||
&& !(tp->t_state & TS_TBLOCK))
|
||||
&& (com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& !(tp->t_state & TS_TBLOCK)) {
|
||||
#if 0
|
||||
outb(com->modem_ctl_port,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
@ -1611,9 +1643,15 @@ repeat:
|
||||
iobase = com->iobase,
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align,
|
||||
unit & CD1400_CAR_CHAN),
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
(com->cy_rflow ?
|
||||
cd_outb(iobase, CD1400_MSVR2,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_DTR) :
|
||||
cd_outb(iobase, CD1400_MSVR1,
|
||||
com->cy_align,
|
||||
com->mcr_image |= MCR_RTS));
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
com->ibuf = ibuf;
|
||||
}
|
||||
@ -1716,25 +1754,35 @@ comparam(tp, t)
|
||||
u_char opt;
|
||||
int s;
|
||||
int unit;
|
||||
long cy_clock;
|
||||
|
||||
/* do historical conversions */
|
||||
if (t->c_ispeed == 0)
|
||||
t->c_ispeed = t->c_ospeed;
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
unit = DEV_TO_UNIT(tp->t_dev);
|
||||
com = com_addr(unit);
|
||||
iobase = com->iobase;
|
||||
s = spltty();
|
||||
cd_outb(iobase, CD1400_CAR, com->cy_align, unit & CD1400_CAR_CHAN);
|
||||
|
||||
/* Set Clock Reference */
|
||||
if (cd_inb(iobase, CD1400_GFRCR, com->cy_align) == CD1400_REV_J) {
|
||||
/* CD1400 rev. J or higher */
|
||||
cy_clock = CY_CLOCK_60;
|
||||
} else {
|
||||
cy_clock = CY_CLOCK_25;
|
||||
}
|
||||
|
||||
/* check requested parameters */
|
||||
idivisor = comspeed(t->c_ispeed, cy_clock, &iprescaler);
|
||||
if (idivisor < 0)
|
||||
return (EINVAL);
|
||||
odivisor = comspeed(t->c_ospeed, cy_clock, &oprescaler);
|
||||
if (odivisor < 0)
|
||||
return (EINVAL);
|
||||
|
||||
/* parameters are OK, convert them to the com struct and the device */
|
||||
if (odivisor == 0)
|
||||
(void)commctl(com, TIOCM_DTR, DMBIC); /* hang up line */
|
||||
else
|
||||
@ -2002,8 +2050,13 @@ comparam(tp, t)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -2085,21 +2138,35 @@ comstart(tp)
|
||||
com->intr_enable |= CD1400_SRER_TXRDY);
|
||||
}
|
||||
if (tp->t_state & TS_TBLOCK) {
|
||||
if (com->mcr_image & MCR_RTS && com->state & CS_RTS_IFLOW)
|
||||
if ((com->cy_rflow ? (com->mcr_image & MCR_DTR) :
|
||||
(com->mcr_image & MCR_RTS))
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image &= ~MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image &= ~MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image &= ~MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
if (!(com->mcr_image & MCR_RTS) && com->iptr < com->ihighwater
|
||||
if ((com->cy_rflow ? (!(com->mcr_image & MCR_DTR)) :
|
||||
(!(com->mcr_image & MCR_RTS)))
|
||||
&& com->iptr < com->ihighwater
|
||||
&& com->state & CS_RTS_IFLOW)
|
||||
#if 0
|
||||
outb(com->modem_ctl_port, com->mcr_image |= MCR_RTS);
|
||||
#else
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
if (com->cy_rflow) {
|
||||
cd_outb(iobase, CD1400_MSVR2, com->cy_align,
|
||||
com->mcr_image |= MCR_DTR);
|
||||
} else {
|
||||
cd_outb(iobase, CD1400_MSVR1, com->cy_align,
|
||||
com->mcr_image |= MCR_RTS);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
enable_intr();
|
||||
@ -2244,11 +2311,13 @@ commctl(com, bits, how)
|
||||
if (com->channel_control & CD1400_CCR_RCVEN)
|
||||
bits |= TIOCM_LE;
|
||||
mcr = com->mcr_image;
|
||||
if (mcr & MCR_DTR)
|
||||
if ((com->cy_rflow ? mcr & MCR_RTS : mcr & MCR_DTR)) {
|
||||
bits |= TIOCM_DTR;
|
||||
if (mcr & MCR_RTS)
|
||||
}
|
||||
if ((com->cy_rflow ? mcr & MCR_DTR : mcr & MCR_RTS)) {
|
||||
/* XXX wired on for Cyclom-8Ys */
|
||||
bits |= TIOCM_RTS;
|
||||
}
|
||||
|
||||
/*
|
||||
* We must read the modem status from the hardware because
|
||||
@ -2272,10 +2341,20 @@ commctl(com, bits, how)
|
||||
return (bits);
|
||||
}
|
||||
mcr = 0;
|
||||
if (bits & TIOCM_DTR)
|
||||
mcr |= MCR_DTR;
|
||||
if (bits & TIOCM_RTS)
|
||||
mcr |= MCR_RTS;
|
||||
if (bits & TIOCM_DTR) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_RTS;
|
||||
} else {
|
||||
mcr |= MCR_DTR;
|
||||
}
|
||||
}
|
||||
if (bits & TIOCM_RTS) {
|
||||
if (com->cy_rflow) {
|
||||
mcr |= MCR_DTR;
|
||||
} else {
|
||||
mcr |= MCR_RTS;
|
||||
}
|
||||
}
|
||||
disable_intr();
|
||||
switch (how) {
|
||||
case DMSET:
|
||||
@ -2452,8 +2531,9 @@ cyinput(c, tp)
|
||||
#endif /* Smarts */
|
||||
|
||||
static int
|
||||
comspeed(speed, prescaler_io)
|
||||
comspeed(speed, clock, prescaler_io)
|
||||
speed_t speed;
|
||||
long clock;
|
||||
int *prescaler_io;
|
||||
{
|
||||
int actual;
|
||||
@ -2470,14 +2550,14 @@ comspeed(speed, prescaler_io)
|
||||
/* determine which prescaler to use */
|
||||
for (prescaler_unit = 4, prescaler = 2048; prescaler_unit;
|
||||
prescaler_unit--, prescaler >>= 2) {
|
||||
if (CY_CLOCK / prescaler / speed > 63)
|
||||
if (clock / prescaler / speed > 63)
|
||||
break;
|
||||
}
|
||||
|
||||
divider = (CY_CLOCK / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
divider = (clock / prescaler * 2 / speed + 1) / 2; /* round off */
|
||||
if (divider > 255)
|
||||
divider = 255;
|
||||
actual = CY_CLOCK/prescaler/divider;
|
||||
actual = clock/prescaler/divider;
|
||||
|
||||
/* 10 times error in percent: */
|
||||
error = ((actual - (long)speed) * 2000 / (long)speed + 1) / 2;
|
||||
|
||||
@ -26,7 +26,7 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id$
|
||||
* $Id: cyreg.h,v 1.3 1996/10/13 01:09:17 davidg Exp $
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -41,7 +41,13 @@
|
||||
|
||||
#define CY_MAX_CD1400s 8 /* for Cyclom-32Y */
|
||||
|
||||
#define CY_CLOCK 25000000 /* baud rate clock */
|
||||
#define CD1400_REV_G 0x46
|
||||
#define CD1400_REV_J 0x48
|
||||
|
||||
#define CY_CLOCK_25 25000000 /* baud rate clock */
|
||||
#define CY_CLOCK_60 60000000 /* baud rate clock */
|
||||
#define CY_CLOCK_25_1MS 0x31
|
||||
#define CY_CLOCK_60_1MS 0x75
|
||||
|
||||
#ifdef CyDebug
|
||||
#define cd_inb(iobase, reg, cy_align) (++cd_inbs, *((iobase) + ((reg)*2 << (cy_align))))
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user