Initial (unfinished!) AR933x support.
This commit is contained in:
Adrian Chadd
parent
83a3ff21a8
commit
43b36ea90a
50
sys/mips/conf/AP121
Normal file
50
sys/mips/conf/AP121
Normal file
@ -0,0 +1,50 @@
|
||||
#
|
||||
# AP121 - the AP121 reference board from Qualcomm Atheros includes:
|
||||
#
|
||||
# * AR9330 SoC
|
||||
# * 16MB RAM
|
||||
# * 4MB flash
|
||||
# * Integrated 1x1 2GHz wifi and 10/100 bridge
|
||||
#
|
||||
# $FreeBSD$
|
||||
#
|
||||
|
||||
# Include the default AR933x parameters
|
||||
include "AR933X_BASE"
|
||||
|
||||
ident AP121
|
||||
|
||||
# Override hints with board values
|
||||
hints "AP121.hints"
|
||||
|
||||
# Force the board memory - the base AP121 only has 16MB RAM
|
||||
options AR71XX_REALMEM=16*1024*1024
|
||||
|
||||
# i2c GPIO bus
|
||||
#device gpioiic
|
||||
#device iicbb
|
||||
#device iicbus
|
||||
#device iic
|
||||
|
||||
# ethernet switch device
|
||||
#device etherswitch
|
||||
|
||||
# RTL8366RB support
|
||||
#device rtl8366rb
|
||||
|
||||
# read MSDOS formatted disks - USB
|
||||
#options MSDOSFS
|
||||
|
||||
# Enable the uboot environment stuff rather then the
|
||||
# redboot stuff.
|
||||
options AR71XX_ENV_UBOOT
|
||||
|
||||
# uzip - to boot natively from flash
|
||||
#device geom_uzip
|
||||
#options GEOM_UZIP
|
||||
|
||||
# Used for the static uboot partition map
|
||||
device geom_map
|
||||
|
||||
# Boot off of the rootfs, as defined in the geom_map setup.
|
||||
options ROOTDEVNAME=\"ufs:map/rootfs.uzip\"
|
||||
130
sys/mips/conf/AP121.hints
Normal file
130
sys/mips/conf/AP121.hints
Normal file
@ -0,0 +1,130 @@
|
||||
#
|
||||
# This file adds to the values in AR91XX_BASE.hints.
|
||||
#
|
||||
# $FreeBSD$
|
||||
|
||||
# Hard-code the PHY for now, until there's switch phy support.
|
||||
# hint.arge.0.phymask=0x000c
|
||||
hint.arge.0.phymask=0x0000
|
||||
hint.arge.0.media=1000
|
||||
hint.arge.0.fduplex=1
|
||||
# Where is the MAC address stored in flash for this particular unit.
|
||||
hint.arge.0.eeprommac=0x1f01fc00
|
||||
|
||||
# This isn't used, but configure it anyway.
|
||||
# This should eventually just not be configured, but the if then
|
||||
# needs to be properly disabled or spurious interrupts occur.
|
||||
hint.arge.1.phymask=0x0
|
||||
|
||||
# Where the ART is
|
||||
# hint.ath.0.eepromaddr=0x1fff1000
|
||||
|
||||
# The AP121 4MB flash layout:
|
||||
#
|
||||
# bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs
|
||||
# init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),
|
||||
# 2752k(rootfs),896k(uImage),64k(NVRAM),64k(ART)
|
||||
#
|
||||
# So:
|
||||
# 256k: uboot
|
||||
# 64: uboot-env
|
||||
# 2752k: rootfs
|
||||
# 896k: kernel
|
||||
# 64k: config
|
||||
# 64k: ART
|
||||
|
||||
hint.map.0.at="flash/spi0"
|
||||
hint.map.0.start=0x00000000
|
||||
hint.map.0.end=0x000040000
|
||||
hint.map.0.name="uboot"
|
||||
hint.map.0.readonly=1
|
||||
|
||||
hint.map.1.at="flash/spi0"
|
||||
hint.map.1.start=0x00040000
|
||||
hint.map.1.end=0x00050000
|
||||
hint.map.1.name="uboot-env"
|
||||
hint.map.1.readonly=0
|
||||
|
||||
hint.map.2.at="flash/spi0"
|
||||
hint.map.2.start=0x00050000
|
||||
hint.map.2.end=0x00300000
|
||||
hint.map.2.name="rootfs"
|
||||
hint.map.2.readonly=0
|
||||
|
||||
hint.map.3.at="flash/spi0"
|
||||
hint.map.3.start=0x00300000
|
||||
hint.map.3.end=0x003e0000
|
||||
hint.map.3.name="kernel"
|
||||
hint.map.3.readonly=0
|
||||
|
||||
hint.map.4.at="flash/spi0"
|
||||
hint.map.4.start=0x003e0000
|
||||
hint.map.4.end=0x003f0000
|
||||
hint.map.4.name="cfg"
|
||||
hint.map.4.readonly=0
|
||||
|
||||
# This is radio calibration section. It is (or should be!) unique
|
||||
# for each board, to take into account thermal and electrical differences
|
||||
# as well as the regulatory compliance data.
|
||||
#
|
||||
hint.map.5.at="flash/spi0"
|
||||
hint.map.5.start=0x003f0000
|
||||
hint.map.5.end=0x00400000
|
||||
hint.map.5.name="art"
|
||||
hint.map.5.readonly=1
|
||||
|
||||
# GPIO specific configuration block
|
||||
|
||||
# Don't flip on anything that isn't already enabled.
|
||||
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
|
||||
# not used here.
|
||||
hint.gpio.0.function_set=0x00002000
|
||||
hint.gpio.0.function_clear=0x00000000
|
||||
|
||||
# These are the GPIO LEDs and buttons which can be software controlled.
|
||||
#hint.gpio.0.pinmask=0x001c02ae
|
||||
hint.gpio.0.pinmask=0x0
|
||||
|
||||
# pin 1 - USB (LED)
|
||||
# pin 2 - System (LED)
|
||||
# Pin 3 - Reset (input)
|
||||
# Pin 5 - QSS (LED)
|
||||
# Pin 7 - QSS Button (input)
|
||||
# Pin 8 - wired into the chip reset line
|
||||
# Pin 9 - WLAN
|
||||
# Pin 10 - UART TX (not GPIO)
|
||||
# Pin 13 - UART RX (not GPIO)
|
||||
# Pin 18 - RTL8366RB switch data line
|
||||
# Pin 19 - RTL8366RB switch clock line
|
||||
# Pin 20 - "GPIO20"
|
||||
|
||||
# LEDs are configured separately and driven by the LED device
|
||||
#hint.gpioled.0.at="gpiobus0"
|
||||
#hint.gpioled.0.name="usb"
|
||||
#hint.gpioled.0.pins=0x0002
|
||||
|
||||
#hint.gpioled.1.at="gpiobus0"
|
||||
#hint.gpioled.1.name="system"
|
||||
#hint.gpioled.1.pins=0x0004
|
||||
|
||||
#hint.gpioled.2.at="gpiobus0"
|
||||
#hint.gpioled.2.name="qss"
|
||||
#hint.gpioled.2.pins=0x0020
|
||||
|
||||
#hint.gpioled.3.at="gpiobus0"
|
||||
#hint.gpioled.3.name="wlan"
|
||||
#hint.gpioled.3.pins=0x0200
|
||||
|
||||
# GPIO I2C bus
|
||||
#hint.gpioiic.0.at="gpiobus0"
|
||||
#hint.gpioiic.0.pins=0xc0000
|
||||
#hint.gpioiic.0.scl=1
|
||||
#hint.gpioiic.0.sda=0
|
||||
|
||||
# I2C bus
|
||||
# Don't be strict about I2C protocol - the relaxed semantics are required
|
||||
# by the realtek switch PHY.
|
||||
# hint.iicbus.0.strict=0
|
||||
|
||||
# Bit bang bus - override default delay
|
||||
#hint.iicbb.0.udelay=3
|
||||
123
sys/mips/conf/AR933X_BASE
Normal file
123
sys/mips/conf/AR933X_BASE
Normal file
@ -0,0 +1,123 @@
|
||||
#
|
||||
# AR91XX -- Kernel configuration base file for the Atheros AR913x SoC.
|
||||
#
|
||||
# This file (and the hints file accompanying it) are not designed to be
|
||||
# used by themselves. Instead, users of this file should create a kernel
|
||||
# config file which includes this file (which gets the basic hints), then
|
||||
# override the default options (adding devices as needed) and adding
|
||||
# hints as needed (for example, the GPIO and LAN PHY.)
|
||||
#
|
||||
# $FreeBSD$
|
||||
#
|
||||
|
||||
machine mips mips
|
||||
ident AR933X_BASE
|
||||
cpu CPU_MIPS4KC
|
||||
makeoptions KERNLOADADDR=0x80050000
|
||||
options HZ=1000
|
||||
|
||||
files "../atheros/files.ar71xx"
|
||||
hints "AR933X_BASE.hints"
|
||||
|
||||
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
# makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_ahb hwpmc"
|
||||
makeoptions MODULES_OVERRIDE=""
|
||||
|
||||
options DDB
|
||||
options KDB
|
||||
options ALQ
|
||||
|
||||
options SCHED_4BSD #4BSD scheduler
|
||||
options INET #InterNETworking
|
||||
#options INET6 #InterNETworking
|
||||
#options NFSCL #Network Filesystem Client
|
||||
options PSEUDOFS #Pseudo-filesystem framework
|
||||
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
|
||||
|
||||
# Don't include the SCSI/CAM strings in the default build
|
||||
options SCSI_NO_SENSE_STRINGS
|
||||
options SCSI_NO_OP_STRINGS
|
||||
|
||||
# .. And no sysctl strings
|
||||
options NO_SYSCTL_DESCR
|
||||
|
||||
# Limit IO size
|
||||
options NBUF=128
|
||||
|
||||
# Limit UMTX hash size
|
||||
options UMTX_NUM_CHAINS=64
|
||||
|
||||
# PMC
|
||||
#options HWPMC_HOOKS
|
||||
#device hwpmc
|
||||
#device hwpmc_mips24k
|
||||
|
||||
# options NFS_LEGACYRPC
|
||||
# Debugging for use in -current
|
||||
#options INVARIANTS
|
||||
#options INVARIANT_SUPPORT
|
||||
#options WITNESS
|
||||
#options WITNESS_SKIPSPIN
|
||||
options FFS #Berkeley Fast Filesystem
|
||||
#options SOFTUPDATES #Enable FFS soft updates support
|
||||
#options UFS_ACL #Support for access control lists
|
||||
#options UFS_DIRHASH #Improve performance on big directories
|
||||
options NO_FFS_SNAPSHOT # We don't require snapshot support
|
||||
|
||||
# Wireless NIC cards
|
||||
options IEEE80211_DEBUG
|
||||
options IEEE80211_SUPPORT_MESH
|
||||
options IEEE80211_SUPPORT_TDMA
|
||||
options IEEE80211_SUPPORT_SUPERG
|
||||
options IEEE80211_ALQ # 802.11 ALQ logging support
|
||||
#device wlan # 802.11 support
|
||||
#device wlan_wep # 802.11 WEP support
|
||||
#device wlan_ccmp # 802.11 CCMP support
|
||||
#device wlan_tkip # 802.11 TKIP support
|
||||
#device wlan_xauth # 802.11 hostap support
|
||||
|
||||
# ath(4)
|
||||
#device ath # Atheros network device
|
||||
#device ath_rate_sample
|
||||
#device ath_ahb # Atheros host bus glue
|
||||
options ATH_DEBUG
|
||||
options ATH_DIAGAPI
|
||||
option ATH_ENABLE_11N
|
||||
option AH_DEBUG_ALQ
|
||||
|
||||
# device ath_hal
|
||||
options AH_DEBUG
|
||||
option AH_SUPPORT_AR5416
|
||||
option AH_SUPPORT_AR9130 # Makes other chipsets not function!
|
||||
option AH_DEBUG_ALQ
|
||||
option AH_AR5416_INTERRUPT_MITIGATION
|
||||
|
||||
device mii
|
||||
device arge
|
||||
|
||||
device usb
|
||||
options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
|
||||
options USB_DEBUG
|
||||
options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this
|
||||
device ehci
|
||||
|
||||
device scbus
|
||||
device umass
|
||||
device da
|
||||
|
||||
device spibus
|
||||
device ar71xx_spi
|
||||
device mx25l
|
||||
device ar71xx_wdog
|
||||
|
||||
device uart
|
||||
device uart_ar933x
|
||||
|
||||
device loop
|
||||
device ether
|
||||
device md
|
||||
device bpf
|
||||
device random
|
||||
device if_bridge
|
||||
device gpio
|
||||
device gpioled
|
||||
59
sys/mips/conf/AR933X_BASE.hints
Normal file
59
sys/mips/conf/AR933X_BASE.hints
Normal file
@ -0,0 +1,59 @@
|
||||
# This file (and the kernel config file accompanying it) are not designed
|
||||
# to be used by themselves. Instead, users of this file should create a
|
||||
# kernel # config file which includes this file (which gets the basic hints),
|
||||
# then override the default options (adding devices as needed) and adding
|
||||
# hints as needed (for example, the GPIO and LAN PHY.)
|
||||
|
||||
# $FreeBSD$
|
||||
|
||||
hint.apb.0.at="nexus0"
|
||||
hint.apb.0.irq=4
|
||||
|
||||
# uart0
|
||||
hint.uart.0.at="apb0"
|
||||
# NB: This isn't an ns8250 UART
|
||||
hint.uart.0.maddr=0x18020000
|
||||
hint.uart.0.msize=0x18
|
||||
hint.uart.0.irq=3
|
||||
|
||||
#ehci - note the 0x100 offset for the AR913x/AR724x
|
||||
hint.ehci.0.at="nexus0"
|
||||
hint.ehci.0.maddr=0x1b000100
|
||||
hint.ehci.0.msize=0x00ffff00
|
||||
hint.ehci.0.irq=1
|
||||
|
||||
hint.arge.0.at="nexus0"
|
||||
hint.arge.0.maddr=0x19000000
|
||||
hint.arge.0.msize=0x1000
|
||||
hint.arge.0.irq=2
|
||||
|
||||
hint.arge.1.at="nexus0"
|
||||
hint.arge.1.maddr=0x1a000000
|
||||
hint.arge.1.msize=0x1000
|
||||
hint.arge.1.irq=3
|
||||
|
||||
# XXX The ath device hangs off of the AHB, rather than the Nexus.
|
||||
hint.ath.0.at="nexus0"
|
||||
hint.ath.0.maddr=0x18100000
|
||||
hint.ath.0.msize=0x20000
|
||||
hint.ath.0.irq=0
|
||||
# Set this to define where the ath calibration data
|
||||
# should be fetched from in physical memory.
|
||||
# hint.ath.0.eepromaddr=0x1fff1000
|
||||
|
||||
# SPI flash
|
||||
hint.spi.0.at="nexus0"
|
||||
hint.spi.0.maddr=0x1f000000
|
||||
hint.spi.0.msize=0x10
|
||||
|
||||
hint.mx25l.0.at="spibus0"
|
||||
hint.mx25l.0.cs=0
|
||||
|
||||
# Watchdog
|
||||
hint.ar71xx_wdog.0.at="nexus0"
|
||||
|
||||
# The GPIO function and pin mask is configured per-board
|
||||
hint.gpio.0.at="apb0"
|
||||
hint.gpio.0.maddr=0x18040000
|
||||
hint.gpio.0.msize=0x1000
|
||||
hint.gpio.0.irq=2
|
||||
Loading…
x
Reference in New Issue
Block a user