Add new USB 3G driver.

Submitted by:	PseudoCylon <moonlightakkiy@yahoo.ca>
MFC after:	14 days
This commit is contained in:
Hans Petter Selasky 2011-07-08 10:58:56 +00:00
parent 695da99eba
commit 49901133a1
6 changed files with 1883 additions and 3 deletions

View File

@ -1918,6 +1918,7 @@ dev/usb/net/if_kue.c optional kue
dev/usb/net/if_mos.c optional mos
dev/usb/net/if_rue.c optional rue
dev/usb/net/if_udav.c optional udav
dev/usb/net/if_usie.c optional usie
dev/usb/net/usb_ethernet.c optional aue | axe | cdce | cue | kue | mos | \
rue | udav
dev/usb/net/uhso.c optional uhso
@ -1970,8 +1971,8 @@ dev/usb/serial/uvscom.c optional uvscom
dev/usb/serial/usb_serial.c optional ucom | u3g | uark | ubsa | ubser | \
uchcom | ucycom | ufoma | uftdi | \
ugensa | uipaq | umcs | umct | \
umodem | umoscom | uplcom | uslcom | \
uvisor | uvscom
umodem | umoscom | uplcom | usie | \
uslcom | uvisor | uvscom
#
# USB misc drivers
#

1587
sys/dev/usb/net/if_usie.c Normal file

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,256 @@
/* $FreeBSD$ */
/*-
* Copyright (c) 2011 Anybots Inc
* written by Akinori Furukoshi <moonlightakkiy@yahoo.ca>
* - ucom part is based on u3g.c
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _IF_USEVAR_H_
#define _IF_USEVAR_H_
#define USIE_DCD 0x0001
#define USIE_DSR 0x0002
#define USIE_DTR 0x0004
#define USIE_RI 0x0008
#define USIE_CTS 0x0100
#define USIE_RTS 0x0200
#define USIE_HIP_FRM_CHR 0x7e
#define USIE_HIP_ESC_CHR 0x7d
#define USIE_HIP_IF 0
#define USIE_HIPCNS_MIN 16 /* HIP + CnS + 2 framing char */
#define USIE_HIPCNS_MAX 261 /* HIP + max CnS 255 + 2 framing char */
#define USIE_CNFG_INDEX 0
#define USIE_IFACE_INDEX 0
#define USIE_IFACE_MAX 12
#define USIE_BUFSIZE 2048
#define USIE_MTU_MAX 1500
#define USIE_RXSZ_MAX 4096
/* USB control pipe request */
#define USIE_POWER 0x00
#define USIE_FW_ATTR 0x06
#define USIE_NMEA 0x07
#define USIE_LINK_STATE 0x22
/* firmware attr flags */
#define USIE_PM_AUTO (1 << 1)
#define USIE_FW_DHCP (1 << 3) /* DHCP capable */
/* line state flags */
#define USIE_LS_DTR (1 << 0)
#define USIE_LS_RTS (1 << 1)
/* Host Interface Porotocol Header */
struct usie_hip {
uint16_t len;
#define USIE_HIP_LEN_MASK 0x3fff
#define USIE_HIP_IP_LEN_MASK 0x07ff
uint8_t id;
#define USIE_HIP_PAD (1 << 7)
#define USIE_HIP_MASK 0x7f
#define USIE_HIP_SYNC2M 0x20 /* host -> modem */
#define USIE_HIP_DOWN 0x26
#define USIE_HIP_CNS2M 0x2b /* h -> m */
#define USIE_HIP_CTX 0x3f
#define USIE_HIP_SYNC2H 0x60 /* h <- m */
#define USIE_HIP_RESTR 0x62
#define USIE_HIP_RCGI 0x64
#define USIE_HIP_CNS2H 0x6b /* h <- m */
#define USIE_HIP_UMTS 0x78
#define USIE_HIP_IP 0x7f
uint8_t param;
} __packed __aligned(4);
/* Control and Status Header */
struct usie_cns {
uint16_t obj; /* object type */
#define USIE_CNS_OB_RSSI 0x1001 /* read RSSI */
#define USIE_CNS_OB_HW_DISABLE 0x1011 /* disable h/w */
#define USIE_CNS_OB_PW_SW 0x1071 /* power on/off */
#define USIE_CNS_OB_PROF_WRITE 0x7003 /* write profile */
#define USIE_CNS_OB_LINK_UPDATE 0x7004 /* dis/connect */
#define USIE_CNS_OB_PDP_READ 0x7006 /* read out IP addr */
uint8_t op; /* operation type */
#define USIE_CNS_OP_ERR (1 << 7)/* | == error */
#define USIE_CNS_OP_REQ 0x01 /* host -> modem */
#define USIE_CNS_OP_RSP 0x02 /* h <- m */
#define USIE_CNS_OP_SET 0x03 /* h -> m */
#define USIE_CNS_OP_ACK 0x04 /* h <- m */
#define USIE_CNS_OP_NOTIF_ON 0x05 /* h -> m */
#define USIE_CNS_OP_RSP_ON 0x06 /* h <- m */
#define USIE_CNS_OP_NOTIF 0x07 /* h <- m */
#define USIE_CNS_OP_NOTIF_OFF 0x08 /* h -> m */
#define USIE_CNS_OP_RSP_OFF 0x09 /* h <- m */
#define USIE_CNS_OP_REQ_CHG 0x0a /* h -> m */
#define USIE_CNS_OP_RSP_CHG 0x0b /* h <- m */
uint8_t rsv0; /* reserved, always '0' */
uint32_t id; /* caller ID */
/*
* .id is to identify calling functions
* h/w responses with the same .id used in request. Only '0' is reserved
* for notification (asynchronous message generated by h/w without any
* request). All other values are user defineable.
*/
#define USIE_CNS_ID_NOTIF 0x00000000 /* reserved */
#define USIE_CNS_ID_INIT 0x00000001
#define USIE_CNS_ID_STOP 0x00000002
#define USIE_CNS_ID_DNS 0x00000003
#define USIE_CNS_ID_RSSI 0x00000004
uint8_t rsv1; /* reserved, always '0' */
uint8_t len; /* length of param */
} __packed;
/*
* CnS param attached to struct usie_cns
* usie_cns.len is total size of this param
* max 255
*/
#define USIE_CNS_PM_UP 0x01
#define USIE_CNS_PM_DOWN 0x00
/* Link Sense Indication data structure */
struct usie_lsi {
uint8_t proto;
#define USIE_LSI_UMTS 0x01
uint8_t pad0;
uint16_t len;
uint8_t area;
#define USIE_LSI_AREA_NO 0x00
#define USIE_LSI_AREA_NODATA 0x01
uint8_t pad1[41];
uint8_t state;
#define USIE_LSI_STATE_IDLE 0x00
uint8_t pad2[33];
uint8_t type;
#define USIE_LSI_IP4 0x00
uint8_t pdp_addr_len; /* PDP addr */
uint8_t pdp_addr[16];
uint8_t pad3[23];
uint8_t dns1_addr_len; /* DNS addr */
uint8_t dns1_addr[16];
uint8_t dns2_addr_len;
uint8_t dns2_addr[16];
uint8_t wins1_addr_len; /* Wins addr */
uint8_t wins1_addr[16];
uint8_t wins2_addr_len;
uint8_t wins2_addr[16];
uint8_t pad4[4];
uint8_t gw_addr_len; /* GW addr */
uint8_t gw_addr[16];
uint8_t rsv[8];
} __packed;
struct usie_net_info {
uint8_t addr_len;
uint8_t pdp_addr[16];
uint8_t dns1_addr[16];
uint8_t dns2_addr[16];
uint8_t gw_addr[16];
} __packed;
/* Tx/Rx IP packet descriptor */
struct usie_desc {
struct usie_hip hip;
uint16_t desc_type;
#define USIE_TYPE_MASK 0x03ff
#define USIE_IP_TX 0x0002
#define USIE_IP_RX 0x0202
struct ether_header ethhdr;
} __packed;
enum {
USIE_UC_STATUS,
USIE_UC_RX,
USIE_UC_TX,
USIE_UC_N_XFER
};
enum {
USIE_IF_STATUS,
USIE_IF_RX,
USIE_IF_TX,
USIE_IF_N_XFER
};
struct usie_softc {
struct ucom_super_softc sc_super_ucom;
#define USIE_UCOM_MAX 6
struct ucom_softc sc_ucom[USIE_UCOM_MAX];
uint8_t sc_uc_ifnum[USIE_UCOM_MAX];
struct mtx sc_mtx;
struct task sc_if_status_task;
struct task sc_if_sync_task;
struct usb_callout sc_if_sync_ch;
struct usie_net_info sc_net;
struct usie_desc sc_txd;
struct usb_xfer *sc_uc_xfer[USIE_UCOM_MAX][USIE_UC_N_XFER];
struct usb_xfer *sc_if_xfer[USIE_IF_N_XFER];
struct ifnet *sc_ifp;
struct usb_device *sc_udev;
device_t sc_dev;
struct mbuf *sc_rxm;
uint16_t sc_if_ifnum;
int16_t sc_rssi;
uint8_t sc_msr;
uint8_t sc_lsr;
uint8_t sc_nucom;
uint8_t sc_resp_temp[USIE_BUFSIZE] __aligned(4);
uint8_t sc_status_temp[USIE_BUFSIZE] __aligned(4);
};
/* Some code assumptions */
extern uint8_t usie_assert[((sizeof(struct usie_hip) +
sizeof(struct usie_lsi) + 1) <= USIE_BUFSIZE) ? 1 : -1];
extern uint8_t ucdc_assert[(sizeof(struct usb_cdc_notification)
>= 16) ? 1 : -1];
#endif /* _IF_USEVAR_H_ */

View File

@ -900,6 +900,7 @@ product AIRPLUS MCD650 0x3198 MCD650 modem
/* AirPrime products */
product AIRPRIME PC5220 0x0112 CDMA Wireless PC Card
product AIRPRIME USB308 0x68A3 USB308 HSPA+ USB Modem
/* AirTies products */
product AIRTIES RT3070 0x2310 RT3070

View File

@ -27,7 +27,7 @@
SUBDIR = usb
SUBDIR += ehci musb ohci uhci xhci uss820dci ${_at91dci} ${_atmegadci}
SUBDIR += rum run uath upgt ural zyd ${_urtw}
SUBDIR += rum run uath upgt usie ural zyd ${_urtw}
SUBDIR += atp uhid ukbd ums udbp ufm uep
SUBDIR += ucom u3g uark ubsa ubser uchcom ucycom ufoma uftdi ugensa uipaq ulpt \
umct umcs umodem umoscom uplcom uslcom uvisor uvscom

View File

@ -0,0 +1,35 @@
#
# $FreeBSD$
#
# Copyright (c) 2011 Hans Petter Selasky. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
.PATH: ${.CURDIR}/../../../dev/usb/net
KMOD = usie
SRCS = if_usie.c
SRCS += opt_bus.h opt_usb.h device_if.h bus_if.h \
usb_if.h usbdevs.h opt_inet.h
.include <bsd.kmod.mk>