Constrain IPv6 routes to single FIBs when net.add_addr_allfibs=0

sys/netinet6/icmp6.c
	Use the interface's FIB for source address selection in ICMPv6 error
	responses.

sys/netinet6/in6.c
	In in6_newaddrmsg, announce arrival of local addresses on the
	interface's FIB only.  In in6_lltable_rtcheck, use a per-fib ND6
	cache instead of a single cache.

sys/netinet6/in6_src.c
	In in6_selectsrc, use the caller's fib instead of the default fib.
	In in6_selectsrc_socket, remove a superfluous check.

sys/netinet6/nd6.c
	In nd6_lle_event, use the interface's fib for routing socket
	messages.  In nd6_is_new_addr_neighbor, check all FIBs when trying
	to determine whether an address is a neighbor.  Also, simplify the
	code for point to point interfaces.

sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
	Make defrouter_select fib-aware, and make all of its callers pass in
	the interface fib.

sys/netinet6/nd6_nbr.c
	When inputting a Neighbor Solicitation packet, consider the
	interface fib instead of the default fib for DAD.  Output NS and
	Neighbor Advertisement packets on the correct fib.

sys/netinet6/nd6_rtr.c
	Allow installing the same host route on different interfaces in
	different FIBs.  If rt_add_addr_allfibs=0, only install or delete
	the prefix route on the interface fib.

tests/sys/netinet/fibs_test.sh
	Clear some expected failures, but add a skip for the newly revealed
	BUG217871.

PR:		196361
Submitted by:	Erick Turnquist <jhujhiti@adjectivism.org>
Reported by:	Jason Healy <jhealy@logn.net>
Reviewed by:	asomers
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9451
This commit is contained in:
Alan Somers 2017-03-17 16:50:37 +00:00
parent a0699ebf77
commit 559b42968c
8 changed files with 144 additions and 76 deletions

View File

@ -2147,7 +2147,7 @@ icmp6_reflect(struct mbuf *m, size_t off)
* source address of the erroneous packet.
*/
in6_splitscope(&ip6->ip6_src, &dst6, &scopeid);
error = in6_selectsrc_addr(RT_DEFAULT_FIB, &dst6,
error = in6_selectsrc_addr(M_GETFIB(m), &dst6,
scopeid, NULL, &src6, &hlim);
if (error) {
@ -2289,7 +2289,7 @@ icmp6_redirect_input(struct mbuf *m, int off)
uint32_t scopeid;
in6_splitscope(&reddst6, &kdst, &scopeid);
if (fib6_lookup_nh_basic(RT_DEFAULT_FIB, &kdst, scopeid, 0, 0,&nh6)==0){
if (fib6_lookup_nh_basic(ifp->if_fib, &kdst, scopeid, 0, 0,&nh6)==0){
if ((nh6.nh_flags & NHF_GATEWAY) == 0) {
nd6log((LOG_ERR,
"ICMP6 redirect rejected; no route "

View File

@ -159,6 +159,7 @@ in6_newaddrmsg(struct in6_ifaddr *ia, int cmd)
struct sockaddr_dl gateway;
struct sockaddr_in6 mask, addr;
struct rtentry rt;
int fibnum;
/*
* initialize for rtmsg generation
@ -176,8 +177,9 @@ in6_newaddrmsg(struct in6_ifaddr *ia, int cmd)
rt.rt_flags = RTF_HOST | RTF_STATIC;
if (cmd == RTM_ADD)
rt.rt_flags |= RTF_UP;
/* Announce arrival of local address to all FIBs. */
rt_newaddrmsg(cmd, &ia->ia_ifa, 0, &rt);
fibnum = V_rt_add_addr_allfibs ? RT_ALL_FIBS : ia62ifa(ia)->ifa_ifp->if_fib;
/* Announce arrival of local address to this FIB. */
rt_newaddrmsg_fib(cmd, &ia->ia_ifa, 0, &rt, fibnum);
}
int
@ -2117,15 +2119,15 @@ in6_lltable_rtcheck(struct ifnet *ifp,
uint32_t scopeid;
int error;
char ip6buf[INET6_ADDRSTRLEN];
int fibnum;
KASSERT(l3addr->sa_family == AF_INET6,
("sin_family %d", l3addr->sa_family));
/* Our local addresses are always only installed on the default FIB. */
sin6 = (const struct sockaddr_in6 *)l3addr;
in6_splitscope(&sin6->sin6_addr, &dst, &scopeid);
error = fib6_lookup_nh_basic(RT_DEFAULT_FIB, &dst, scopeid, 0, 0, &nh6);
fibnum = V_rt_add_addr_allfibs ? RT_DEFAULT_FIB : ifp->if_fib;
error = fib6_lookup_nh_basic(fibnum, &dst, scopeid, 0, 0, &nh6);
if (error != 0 || (nh6.nh_flags & NHF_GATEWAY) || nh6.nh_ifp != ifp) {
struct ifaddr *ifa;
/*

View File

@ -297,7 +297,7 @@ in6_selectsrc(uint32_t fibnum, struct sockaddr_in6 *dstsock,
*/
/* get the outgoing interface */
if ((error = in6_selectif(dstsock, opts, mopts, &ifp, oifp,
(inp != NULL) ? inp->inp_inc.inc_fibnum : RT_DEFAULT_FIB)) != 0)
(inp != NULL) ? inp->inp_inc.inc_fibnum : fibnum)) != 0)
return (error);
#ifdef DIAGNOSTIC
@ -563,7 +563,7 @@ in6_selectsrc_socket(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
uint32_t fibnum;
int error;
fibnum = (inp != NULL) ? inp->inp_inc.inc_fibnum : RT_DEFAULT_FIB;
fibnum = inp->inp_inc.inc_fibnum;
retifp = NULL;
error = in6_selectsrc(fibnum, dstsock, opts, inp, cred, &retifp, srcp);

View File

@ -157,6 +157,7 @@ nd6_lle_event(void *arg __unused, struct llentry *lle, int evt)
struct sockaddr_dl gw;
struct ifnet *ifp;
int type;
int fibnum;
LLE_WLOCK_ASSERT(lle);
@ -194,8 +195,9 @@ nd6_lle_event(void *arg __unused, struct llentry *lle, int evt)
rtinfo.rti_info[RTAX_DST] = (struct sockaddr *)&dst;
rtinfo.rti_info[RTAX_GATEWAY] = (struct sockaddr *)&gw;
rtinfo.rti_addrs = RTA_DST | RTA_GATEWAY;
fibnum = V_rt_add_addr_allfibs ? RT_ALL_FIBS : ifp->if_fib;
rt_missmsg_fib(type, &rtinfo, RTF_HOST | RTF_LLDATA | (
type == RTM_ADD ? RTF_UP: 0), 0, RT_DEFAULT_FIB);
type == RTM_ADD ? RTF_UP: 0), 0, fibnum);
}
/*
@ -1200,7 +1202,7 @@ nd6_purge(struct ifnet *ifp)
if (ND_IFINFO(ifp)->flags & ND6_IFF_ACCEPT_RTADV) {
/* Refresh default router list. */
defrouter_select();
defrouter_select_fib(ifp->if_fib);
}
}
@ -1253,7 +1255,7 @@ static int
nd6_is_new_addr_neighbor(const struct sockaddr_in6 *addr, struct ifnet *ifp)
{
struct nd_prefix *pr;
struct ifaddr *dstaddr;
struct ifaddr *ifa;
struct rt_addrinfo info;
struct sockaddr_in6 rt_key;
const struct sockaddr *dst6;
@ -1287,9 +1289,6 @@ nd6_is_new_addr_neighbor(const struct sockaddr_in6 *addr, struct ifnet *ifp)
bzero(&info, sizeof(info));
info.rti_info[RTAX_DST] = (struct sockaddr *)&rt_key;
/* Always use the default FIB here. XXME - why? */
fibnum = RT_DEFAULT_FIB;
/*
* If the address matches one of our addresses,
* it should be a neighbor.
@ -1303,19 +1302,31 @@ nd6_is_new_addr_neighbor(const struct sockaddr_in6 *addr, struct ifnet *ifp)
continue;
if ((pr->ndpr_stateflags & NDPRF_ONLINK) == 0) {
/* Always use the default FIB here. */
dst6 = (const struct sockaddr *)&pr->ndpr_prefix;
/*
* We only need to check all FIBs if add_addr_allfibs
* is unset. If set, checking any FIB will suffice.
*/
fibnum = V_rt_add_addr_allfibs ? rt_numfibs - 1 : 0;
for (; fibnum < rt_numfibs; fibnum++) {
genid = V_nd6_list_genid;
ND6_RUNLOCK();
/* Restore length field before retrying lookup */
/*
* Restore length field before
* retrying lookup
*/
rt_key.sin6_len = sizeof(rt_key);
error = rib_lookup_info(fibnum, dst6, 0, 0, &info);
error = rib_lookup_info(fibnum, dst6, 0, 0,
&info);
ND6_RLOCK();
if (genid != V_nd6_list_genid)
goto restart;
if (error == 0)
break;
}
if (error != 0)
continue;
@ -1346,13 +1357,18 @@ nd6_is_new_addr_neighbor(const struct sockaddr_in6 *addr, struct ifnet *ifp)
* If the address is assigned on the node of the other side of
* a p2p interface, the address should be a neighbor.
*/
dstaddr = ifa_ifwithdstaddr((const struct sockaddr *)addr, RT_ALL_FIBS);
if (dstaddr != NULL) {
if (dstaddr->ifa_ifp == ifp) {
ifa_free(dstaddr);
return (1);
if (ifp->if_flags & IFF_POINTOPOINT) {
IF_ADDR_RLOCK(ifp);
TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != addr->sin6_family)
continue;
if (ifa->ifa_dstaddr != NULL &&
sa_equal(addr, ifa->ifa_dstaddr)) {
IF_ADDR_RUNLOCK(ifp);
return 1;
}
ifa_free(dstaddr);
}
IF_ADDR_RUNLOCK(ifp);
}
/*
@ -1485,7 +1501,7 @@ nd6_free(struct llentry **lnp, int gc)
/*
* We need to unlock to avoid a LOR with rt6_flush() with the
* rnh and for the calls to pfxlist_onlink_check() and
* defrouter_select() in the block further down for calls
* defrouter_select_fib() in the block further down for calls
* into nd6_lookup(). We still hold a ref.
*/
LLE_WUNLOCK(ln);
@ -1500,7 +1516,7 @@ nd6_free(struct llentry **lnp, int gc)
if (dr) {
/*
* Since defrouter_select() does not affect the
* Since defrouter_select_fib() does not affect the
* on-link determination and MIP6 needs the check
* before the default router selection, we perform
* the check now.
@ -1510,7 +1526,7 @@ nd6_free(struct llentry **lnp, int gc)
/*
* Refresh default router list.
*/
defrouter_select();
defrouter_select_fib(dr->ifp->if_fib);
}
/*
@ -2104,11 +2120,11 @@ nd6_cache_lladdr(struct ifnet *ifp, struct in6_addr *from, char *lladdr,
* Question: can we restrict the first condition to the "is_newentry"
* case?
* XXX: when we hear an RA from a new router with the link-layer
* address option, defrouter_select() is called twice, since
* address option, defrouter_select_fib() is called twice, since
* defrtrlist_update called the function as well. However, I believe
* we can compromise the overhead, since it only happens the first
* time.
* XXX: although defrouter_select() should not have a bad effect
* XXX: although defrouter_select_fib() should not have a bad effect
* for those are not autoconfigured hosts, we explicitly avoid such
* cases for safety.
*/
@ -2117,7 +2133,7 @@ nd6_cache_lladdr(struct ifnet *ifp, struct in6_addr *from, char *lladdr,
/*
* guaranteed recursion
*/
defrouter_select();
defrouter_select_fib(ifp->if_fib);
}
}

View File

@ -469,6 +469,7 @@ void nd6_dad_stop(struct ifaddr *);
void nd6_rs_input(struct mbuf *, int, int);
void nd6_ra_input(struct mbuf *, int, int);
void defrouter_reset(void);
void defrouter_select_fib(int fibnum);
void defrouter_select(void);
void defrouter_ref(struct nd_defrouter *);
void defrouter_rele(struct nd_defrouter *);

View File

@ -262,8 +262,7 @@ nd6_ns_input(struct mbuf *m, int off, int icmp6len)
bzero(&info, sizeof(info));
info.rti_info[RTAX_GATEWAY] = (struct sockaddr *)&rt_gateway;
/* Always use the default FIB. */
if (rib_lookup_info(RT_DEFAULT_FIB, (struct sockaddr *)&dst6,
if (rib_lookup_info(ifp->if_fib, (struct sockaddr *)&dst6,
0, 0, &info) == 0) {
if ((info.rti_flags & RTF_ANNOUNCE) != 0 &&
rt_gateway.sdl_family == AF_LINK) {
@ -485,7 +484,7 @@ nd6_ns_output_fib(struct ifnet *ifp, const struct in6_addr *saddr6,
uint32_t scopeid;
in6_splitscope(&ip6->ip6_dst, &dst6, &scopeid);
error = in6_selectsrc_addr(RT_DEFAULT_FIB, &dst6,
error = in6_selectsrc_addr(fibnum, &dst6,
scopeid, ifp, &src6, NULL);
if (error) {
char ip6buf[INET6_ADDRSTRLEN];
@ -982,7 +981,7 @@ nd6_na_output_fib(struct ifnet *ifp, const struct in6_addr *daddr6_0,
* Select a source whose scope is the same as that of the dest.
*/
in6_splitscope(&daddr6, &dst6, &scopeid);
error = in6_selectsrc_addr(RT_DEFAULT_FIB, &dst6,
error = in6_selectsrc_addr(fibnum, &dst6,
scopeid, ifp, &src6, NULL);
if (error) {
char ip6buf[INET6_ADDRSTRLEN];

View File

@ -500,7 +500,7 @@ defrouter_addreq(struct nd_defrouter *new)
error = in6_rtrequest(RTM_ADD, (struct sockaddr *)&def,
(struct sockaddr *)&gate, (struct sockaddr *)&mask,
RTF_GATEWAY, &newrt, RT_DEFAULT_FIB);
RTF_GATEWAY, &newrt, new->ifp->if_fib);
if (newrt) {
nd6_rtmsg(RTM_ADD, newrt); /* tell user process */
RTFREE(newrt);
@ -551,8 +551,8 @@ defrouter_rele(struct nd_defrouter *dr)
/*
* Remove the default route for a given router.
* This is just a subroutine function for defrouter_select(), and should
* not be called from anywhere else.
* This is just a subroutine function for defrouter_select_fib(), and
* should not be called from anywhere else.
*/
static void
defrouter_delreq(struct nd_defrouter *dr)
@ -571,7 +571,7 @@ defrouter_delreq(struct nd_defrouter *dr)
in6_rtrequest(RTM_DELETE, (struct sockaddr *)&def,
(struct sockaddr *)&gate,
(struct sockaddr *)&mask, RTF_GATEWAY, &oldrt, RT_DEFAULT_FIB);
(struct sockaddr *)&mask, RTF_GATEWAY, &oldrt, dr->ifp->if_fib);
if (oldrt) {
nd6_rtmsg(RTM_DELETE, oldrt);
RTFREE(oldrt);
@ -698,11 +698,11 @@ defrouter_del(struct nd_defrouter *dr)
/*
* If the router is the primary one, choose a new one.
* Note that defrouter_select() will remove the current gateway
* from the routing table.
* Note that defrouter_select_fib() will remove the current
* gateway from the routing table.
*/
if (deldr)
defrouter_select();
defrouter_select_fib(deldr->ifp->if_fib);
/*
* Release the list reference.
@ -730,13 +730,23 @@ defrouter_del(struct nd_defrouter *dr)
* even when the multipath routing is available, because we're not sure about
* the benefits for stub hosts comparing to the risk of making the code
* complicated and the possibility of introducing bugs.
*
* We maintain a single list of routers for multiple FIBs, only considering one
* at a time based on the receiving interface's FIB. If @fibnum is RT_ALL_FIBS,
* we do the whole thing multiple times.
*/
void
defrouter_select(void)
defrouter_select_fib(int fibnum)
{
struct nd_defrouter *dr, *selected_dr, *installed_dr;
struct llentry *ln = NULL;
if (fibnum == RT_ALL_FIBS) {
for (fibnum = 0; fibnum < rt_numfibs; fibnum++) {
defrouter_select_fib(fibnum);
}
}
ND6_RLOCK();
/*
* Let's handle easy case (3) first:
@ -755,7 +765,7 @@ defrouter_select(void)
selected_dr = installed_dr = NULL;
TAILQ_FOREACH(dr, &V_nd_defrouter, dr_entry) {
IF_AFDATA_RLOCK(dr->ifp);
if (selected_dr == NULL &&
if (selected_dr == NULL && dr->ifp->if_fib == fibnum &&
(ln = nd6_lookup(&dr->rtaddr, 0, dr->ifp)) &&
ND6_IS_LLINFO_PROBREACH(ln)) {
selected_dr = dr;
@ -767,14 +777,17 @@ defrouter_select(void)
ln = NULL;
}
if (dr->installed) {
if (dr->installed && dr->ifp->if_fib == fibnum) {
if (installed_dr == NULL) {
installed_dr = dr;
defrouter_ref(installed_dr);
} else {
/* this should not happen. warn for diagnosis. */
log(LOG_ERR,
"defrouter_select: more than one router is installed\n");
/*
* this should not happen.
* warn for diagnosis.
*/
log(LOG_ERR, "defrouter_select_fib: more than "
"one router is installed\n");
}
}
}
@ -789,14 +802,24 @@ defrouter_select(void)
if (selected_dr == NULL) {
if (installed_dr == NULL ||
TAILQ_NEXT(installed_dr, dr_entry) == NULL)
selected_dr = TAILQ_FIRST(&V_nd_defrouter);
dr = TAILQ_FIRST(&V_nd_defrouter);
else
selected_dr = TAILQ_NEXT(installed_dr, dr_entry);
dr = TAILQ_NEXT(installed_dr, dr_entry);
/* Ensure we select a router for this FIB. */
TAILQ_FOREACH_FROM(dr, &V_nd_defrouter, dr_entry) {
if (dr->ifp->if_fib == fibnum) {
selected_dr = dr;
defrouter_ref(selected_dr);
break;
}
}
} else if (installed_dr != NULL) {
IF_AFDATA_RLOCK(installed_dr->ifp);
if ((ln = nd6_lookup(&installed_dr->rtaddr, 0, installed_dr->ifp)) &&
if ((ln = nd6_lookup(&installed_dr->rtaddr, 0,
installed_dr->ifp)) &&
ND6_IS_LLINFO_PROBREACH(ln) &&
installed_dr->ifp->if_fib == fibnum &&
rtpref(selected_dr) <= rtpref(installed_dr)) {
defrouter_rele(selected_dr);
selected_dr = installed_dr;
@ -808,20 +831,32 @@ defrouter_select(void)
ND6_RUNLOCK();
/*
* If the selected router is different than the installed one,
* remove the installed router and install the selected one.
* Note that the selected router is never NULL here.
* If we selected a router for this FIB and it's different
* than the installed one, remove the installed router and
* install the selected one in its place.
*/
if (installed_dr != selected_dr) {
if (installed_dr != NULL) {
defrouter_delreq(installed_dr);
defrouter_rele(installed_dr);
}
if (selected_dr != NULL)
defrouter_addreq(selected_dr);
}
if (selected_dr != NULL)
defrouter_rele(selected_dr);
}
/*
* Maintain old KPI for default router selection.
* If unspecified, we can re-select routers for all FIBs.
*/
void
defrouter_select(void)
{
defrouter_select_fib(RT_ALL_FIBS);
}
/*
* for default router selection
* regards router-preference field as a 2-bit signed integer
@ -942,7 +977,7 @@ defrtrlist_update(struct nd_defrouter *new)
V_nd6_list_genid++;
ND6_WUNLOCK();
defrouter_select();
defrouter_select_fib(new->ifp->if_fib);
return (n);
}
@ -1731,7 +1766,7 @@ nd6_prefix_onlink_rtrequest(struct nd_prefix *pr, struct ifaddr *ifa)
struct rtentry *rt;
struct sockaddr_in6 mask6;
u_long rtflags;
int error, a_failure, fibnum;
int error, a_failure, fibnum, maxfib;
/*
* in6_ifinit() sets nd6_rtrequest to ifa_rtrequest for all ifaddrs.
@ -1742,8 +1777,15 @@ nd6_prefix_onlink_rtrequest(struct nd_prefix *pr, struct ifaddr *ifa)
mask6.sin6_addr = pr->ndpr_mask;
rtflags = (ifa->ifa_flags & ~IFA_RTSELF) | RTF_UP;
if(V_rt_add_addr_allfibs) {
fibnum = 0;
maxfib = rt_numfibs;
} else {
fibnum = ifa->ifa_ifp->if_fib;
maxfib = fibnum + 1;
}
a_failure = 0;
for (fibnum = 0; fibnum < rt_numfibs; fibnum++) {
for (; fibnum < maxfib; fibnum++) {
rt = NULL;
error = in6_rtrequest(RTM_ADD,
@ -1831,6 +1873,10 @@ nd6_prefix_onlink(struct nd_prefix *pr)
if ((opr->ndpr_stateflags & NDPRF_ONLINK) == 0)
continue;
if (!V_rt_add_addr_allfibs &&
opr->ndpr_ifp->if_fib != pr->ndpr_ifp->if_fib)
continue;
if (opr->ndpr_plen == pr->ndpr_plen &&
in6_are_prefix_equal(&pr->ndpr_prefix.sin6_addr,
&opr->ndpr_prefix.sin6_addr, pr->ndpr_plen)) {
@ -1891,7 +1937,7 @@ nd6_prefix_offlink(struct nd_prefix *pr)
struct rtentry *rt;
char ip6buf[INET6_ADDRSTRLEN];
uint64_t genid;
int fibnum, a_failure;
int fibnum, maxfib, a_failure;
ND6_ONLINK_LOCK_ASSERT();
ND6_UNLOCK_ASSERT();
@ -1909,8 +1955,16 @@ nd6_prefix_offlink(struct nd_prefix *pr)
mask6.sin6_len = sizeof(sa6);
bcopy(&pr->ndpr_mask, &mask6.sin6_addr, sizeof(struct in6_addr));
if (V_rt_add_addr_allfibs) {
fibnum = 0;
maxfib = rt_numfibs;
} else {
fibnum = ifp->if_fib;
maxfib = fibnum + 1;
}
a_failure = 0;
for (fibnum = 0; fibnum < rt_numfibs; fibnum++) {
for (; fibnum < maxfib; fibnum++) {
rt = NULL;
error = in6_rtrequest(RTM_DELETE, (struct sockaddr *)&sa6, NULL,
(struct sockaddr *)&mask6, 0, &rt, fibnum);

View File

@ -163,7 +163,6 @@ loopback_and_network_routes_on_nondefault_fib_inet6_head()
loopback_and_network_routes_on_nondefault_fib_inet6_body()
{
atf_expect_fail "PR196361 IPv6 network routes don't respect net.add_addr_allfibs=0"
# Configure the TAP interface to use a nonrouteable RFC3849
# address and a non-default fib
ADDR="2001:db8::2"
@ -452,6 +451,7 @@ slaac_on_nondefault_fib6_head()
}
slaac_on_nondefault_fib6_body()
{
atf_skip "BUG217871 SLAAC on a newly created epair sometimes fails to add routes"
# Configure the epair interfaces to use nonrouteable RFC3849
# addresses and non-default FIBs
ADDR="2001:db8::2"
@ -459,8 +459,6 @@ slaac_on_nondefault_fib6_body()
SUBNET="2001:db8:"
MASK="64"
atf_expect_fail "PR196361 IPv6 network routes don't respect net.add_addr_allfibs=0"
# Check system configuration
if [ 0 != `sysctl -n net.add_addr_allfibs` ]; then
atf_skip "This test requires net.add_addr_allfibs=0"
@ -478,8 +476,8 @@ slaac_on_nondefault_fib6_body()
# Configure epair interfaces
get_epair
setup_iface "$EPAIRA" "$FIB0" inet6 ${ADDR} ${MASK}
echo ifconfig "$EPAIRB" up inet6 fib $FIB1 -ifdisabled accept_rtadv
ifconfig "$EPAIRB" inet6 -ifdisabled accept_rtadv fib $FIB1 up
echo setfib $FIB1 ifconfig "$EPAIRB" inet6 -ifdisabled accept_rtadv fib $FIB1 up
setfib $FIB1 ifconfig "$EPAIRB" inet6 -ifdisabled accept_rtadv fib $FIB1 up
rtadvd -p rtadvd.pid -C rtadvd.sock -c /dev/null "$EPAIRA"
rtsol "$EPAIRB"
@ -514,7 +512,7 @@ slaac_on_nondefault_fib6_cleanup()
cleanup_ifaces
if [ -f "rtadvd.pid" ]; then
pkill -F rtadvd.pid
rm rtadvd.pid
rm -f rtadvd.pid
fi
if [ -f "rfc6204w3.state" ] ; then
sysctl "net.inet6.ip6.rfc6204w3"=`cat "rfc6204w3.state"`
@ -685,8 +683,6 @@ udp_dontroute6_body()
TARGET="2001:db8::100"
SRCDIR=`atf_get_srcdir`
atf_expect_fail "PR196361 IPv6 network routes don't respect net.add_addr_allfibs=0"
# Check system configuration
if [ 0 != `sysctl -n net.add_addr_allfibs` ]; then
atf_skip "This test requires net.add_addr_allfibs=0"
@ -767,7 +763,7 @@ get_epair()
local EPAIRD
if EPAIRD=`ifconfig epair create`; then
# Record the TAP device so we can clean it up later
# Record the epair device so we can clean it up later
echo ${EPAIRD} >> "ifaces_to_cleanup"
EPAIRA=${EPAIRD}
EPAIRB=${EPAIRD%a}b