Split BeagleBone DTS to generic AM335x part and Beagle-bone specific
This commit is contained in:
gonzo
parent
42748e0348
commit
6460865378
sys/boot/fdt/dts
225
sys/boot/fdt/dts/am335x.dtsi
Normal file
225
sys/boot/fdt/dts/am335x.dtsi
Normal file
@ -0,0 +1,225 @@
|
||||
/*-
|
||||
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "ti,am335x";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
interrupt-parent = <&AINTC>;
|
||||
|
||||
SOC: am335x {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
bus-frequency = <0>;
|
||||
|
||||
AINTC: interrupt-controller@48200000 {
|
||||
compatible = "ti,aintc";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = < 0x48200000 0x1000 >;
|
||||
};
|
||||
|
||||
scm@44e10000 {
|
||||
compatible = "ti,scm";
|
||||
reg = < 0x44e10000 0x2000 >;
|
||||
/* Set of triplets < padname, muxname, padstate> */
|
||||
scm-pad-config =
|
||||
/* I2C0 */
|
||||
"I2C0_SDA", "I2C0_SDA","i2c",
|
||||
"I2C0_SCL", "I2C0_SCL","i2c",
|
||||
/* Ethernet */
|
||||
"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
|
||||
"MII1_TX_EN", "gmii1_txen", "output",
|
||||
"MII1_RX_DV", "gmii1_rxdv", "input_pulldown",
|
||||
"MII1_TXD3", "gmii1_txd3", "output",
|
||||
"MII1_TXD2", "gmii1_txd2", "output",
|
||||
"MII1_TXD1", "gmii1_txd1", "output",
|
||||
"MII1_TXD0", "gmii1_txd0", "output",
|
||||
"MII1_TX_CLK", "gmii1_txclk", "input_pulldown",
|
||||
"MII1_RX_CLK", "gmii1_rxclk", "input_pulldown",
|
||||
"MII1_RXD3", "gmii1_rxd3", "input_pulldown",
|
||||
"MII1_RXD2", "gmii1_rxd2", "input_pulldown",
|
||||
"MII1_RXD1", "gmii1_rxd1", "input_pulldown",
|
||||
"MII1_RXD0", "gmii1_rxd0", "input_pulldown",
|
||||
"MDIO", "mdio_data", "input_pullup",
|
||||
"MDC", "mdio_clk", "output_pullup",
|
||||
/* MMCSD0 */
|
||||
"MMC0_CMD", "mmc0_cmd", "input_pullup",
|
||||
"MMC0_CLK", "mmc0_clk", "input_pullup",
|
||||
"MMC0_DAT0", "mmc0_dat0", "input_pullup",
|
||||
"MMC0_DAT1", "mmc0_dat1", "input_pullup",
|
||||
"MMC0_DAT2", "mmc0_dat2", "input_pullup",
|
||||
"MMC0_DAT3", "mmc0_dat3", "input_pullup",
|
||||
/* GPIO */
|
||||
"ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown",
|
||||
"GPMC_AD10", "gpio0_26", "input_pulldown",
|
||||
"GPMC_AD11", "gpio0_27", "input_pulldown",
|
||||
"GPMC_AD0", "gpio1_0", "input_pulldown",
|
||||
"GPMC_AD1", "gpio1_1", "input_pulldown",
|
||||
"GPMC_AD2", "gpio1_2", "input_pulldown",
|
||||
"GPMC_AD3", "gpio1_3", "input_pulldown",
|
||||
"GPMC_AD4", "gpio1_4", "input_pulldown",
|
||||
"GPMC_AD5", "gpio1_5", "input_pulldown",
|
||||
"GPMC_AD6", "gpio1_6", "input_pulldown",
|
||||
"GPMC_AD7", "gpio1_7", "input_pulldown",
|
||||
"GPMC_AD12", "gpio1_12", "input_pulldown",
|
||||
"GPMC_AD13", "gpio1_13", "input_pulldown",
|
||||
"GPMC_AD14", "gpio1_14", "input_pulldown",
|
||||
"GPMC_AD15", "gpio1_15", "input_pulldown",
|
||||
"GPMC_A0", "gpio1_16", "input_pulldown",
|
||||
"GPMC_A1", "gpio1_17", "input_pulldown",
|
||||
"GPMC_A5", "gpio1_21", "output", /* User LED 1 */
|
||||
"GPMC_A6", "gpio1_22", "output", /* User LED 2 */
|
||||
"GPMC_A7", "gpio1_23", "output", /* User LED 3 */
|
||||
"GPMC_A8", "gpio1_24", "output", /* User LED 4 */
|
||||
"GPMC_BEn1", "gpio1_28", "input_pulldown",
|
||||
"GPMC_CSn0", "gpio1_29", "input_pulldown",
|
||||
"GPMC_CSn1", "gpio1_30", "input_pulldown",
|
||||
"GPMC_CSn2", "gpio1_31", "input_pulldown",
|
||||
"GPMC_CLK", "gpio2_1", "input_pulldown",
|
||||
"LCD_DATA0", "gpio2_6", "input_pulldown",
|
||||
"LCD_DATA1", "gpio2_7", "input_pulldown",
|
||||
"LCD_DATA2", "gpio2_8", "input_pulldown",
|
||||
"LCD_DATA3", "gpio2_9", "input_pulldown",
|
||||
"LCD_DATA4", "gpio2_10", "input_pulldown",
|
||||
"LCD_DATA5", "gpio2_11", "input_pulldown",
|
||||
"LCD_DATA6", "gpio2_12", "input_pulldown",
|
||||
"LCD_DATA7", "gpio2_13", "input_pulldown",
|
||||
"LCD_VSYNC", "gpio2_22", "input_pulldown",
|
||||
"LCD_HSYNC", "gpio2_23", "input_pulldown",
|
||||
"LCD_PCLK", "gpio2_24", "input_pulldown",
|
||||
"LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown",
|
||||
"MCASP0_FSR", "gpio3_19", "input_pulldown",
|
||||
"MCASP0_AHCLKX", "gpio3_21", "input_pulldown",
|
||||
/* TIMERs */
|
||||
"GPMC_ADVn_ALE", "timer4", "output",
|
||||
"GPMC_BEn0_CLE", "timer5", "output",
|
||||
"GPMC_WEn", "timer6", "output",
|
||||
"GPMC_OEn_REn", "timer7", "output",
|
||||
/* PWM */
|
||||
"GPMC_A2", "ehrpwm1A", "output",
|
||||
"GPMC_A3", "ehrpwm1B", "output",
|
||||
"GPMC_AD8", "ehrpwm2A", "output",
|
||||
"GPMC_AD9", "ehrpwm2B", "output";
|
||||
};
|
||||
|
||||
prcm@44E00000 {
|
||||
compatible = "am335x,prcm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E00000 0x1300 >;
|
||||
};
|
||||
|
||||
dmtimers@44E05000 {
|
||||
compatible = "ti,am335x-dmtimer";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E05000 0x1000
|
||||
0x44E31000 0x1000
|
||||
0x48040000 0x1000
|
||||
0x48042000 0x1000
|
||||
0x48044000 0x1000
|
||||
0x48046000 0x1000
|
||||
0x48048000 0x1000
|
||||
0x4804A000 0x1000 >;
|
||||
interrupts = < 66 67 68 69 92 93 94 95 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
GPIO: gpio {
|
||||
#gpio-cells = <3>;
|
||||
compatible = "ti,gpio";
|
||||
gpio-controller;
|
||||
reg =< 0x44E07000 0x1000
|
||||
0x4804C000 0x1000
|
||||
0x481AC000 0x1000
|
||||
0x481AE000 0x1000 >;
|
||||
interrupts = < 96 97 98 99 32 33 62 63 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
uart0: serial@44E09000 {
|
||||
compatible = "ns16550";
|
||||
reg = <0x44E09000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 72 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >; /* FIXME */
|
||||
};
|
||||
|
||||
edma3@49000000 {
|
||||
compatible = "ti,edma3";
|
||||
reg =< 0x49000000 0x100000 /* Channel Controller Regs */
|
||||
0x49800000 0x100000 /* Transfer Controller 0 Regs */
|
||||
0x49900000 0x100000 /* Transfer Controller 1 Regs */
|
||||
0x49a00000 0x100000 >; /* Transfer Controller 2 Regs */
|
||||
interrupts = <12 13 14>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
mmchs0@4809C000 {
|
||||
compatible = "ti,mmchs";
|
||||
reg =<0x48060000 0x1000 >;
|
||||
interrupts = <64>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
mmchs-device-id = <0>;
|
||||
};
|
||||
|
||||
enet0: ethernet@4A100000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ti,cpsw";
|
||||
reg = <0x4A100000 0x4000>;
|
||||
interrupts = <40 41 42 43>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
phy-handle = <&phy0>;
|
||||
mdio@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,cpsw-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@44e0b000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,i2c";
|
||||
reg =< 0x44e0b000 0x1000 >;
|
||||
interrupts = <70>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
i2c-device-id = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -28,13 +28,10 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "am335x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "beaglebone";
|
||||
compatible = "beaglebone", "ti,am335x";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
interrupt-parent = <&AINTC>;
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
@ -46,199 +43,13 @@
|
||||
reg = < 0x80000000 0x10000000 >; /* 256MB RAM */
|
||||
};
|
||||
|
||||
SOC: am335x {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
bus-frequency = <0>;
|
||||
|
||||
AINTC: interrupt-controller@48200000 {
|
||||
compatible = "ti,aintc";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = < 0x48200000 0x1000 >;
|
||||
};
|
||||
|
||||
scm@44e10000 {
|
||||
compatible = "ti,scm";
|
||||
reg = < 0x44e10000 0x2000 >;
|
||||
/* Set of triplets < padname, muxname, padstate> */
|
||||
scm-pad-config =
|
||||
/* I2C0 */
|
||||
"I2C0_SDA", "I2C0_SDA","i2c",
|
||||
"I2C0_SCL", "I2C0_SCL","i2c",
|
||||
/* Ethernet */
|
||||
"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
|
||||
"MII1_TX_EN", "gmii1_txen", "output",
|
||||
"MII1_RX_DV", "gmii1_rxdv", "input_pulldown",
|
||||
"MII1_TXD3", "gmii1_txd3", "output",
|
||||
"MII1_TXD2", "gmii1_txd2", "output",
|
||||
"MII1_TXD1", "gmii1_txd1", "output",
|
||||
"MII1_TXD0", "gmii1_txd0", "output",
|
||||
"MII1_TX_CLK", "gmii1_txclk", "input_pulldown",
|
||||
"MII1_RX_CLK", "gmii1_rxclk", "input_pulldown",
|
||||
"MII1_RXD3", "gmii1_rxd3", "input_pulldown",
|
||||
"MII1_RXD2", "gmii1_rxd2", "input_pulldown",
|
||||
"MII1_RXD1", "gmii1_rxd1", "input_pulldown",
|
||||
"MII1_RXD0", "gmii1_rxd0", "input_pulldown",
|
||||
"MDIO", "mdio_data", "input_pullup",
|
||||
"MDC", "mdio_clk", "output_pullup",
|
||||
/* MMCSD0 */
|
||||
"MMC0_CMD", "mmc0_cmd", "input_pullup",
|
||||
"MMC0_CLK", "mmc0_clk", "input_pullup",
|
||||
"MMC0_DAT0", "mmc0_dat0", "input_pullup",
|
||||
"MMC0_DAT1", "mmc0_dat1", "input_pullup",
|
||||
"MMC0_DAT2", "mmc0_dat2", "input_pullup",
|
||||
"MMC0_DAT3", "mmc0_dat3", "input_pullup",
|
||||
/* GPIO */
|
||||
"ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown",
|
||||
"GPMC_AD10", "gpio0_26", "input_pulldown",
|
||||
"GPMC_AD11", "gpio0_27", "input_pulldown",
|
||||
"GPMC_AD0", "gpio1_0", "input_pulldown",
|
||||
"GPMC_AD1", "gpio1_1", "input_pulldown",
|
||||
"GPMC_AD2", "gpio1_2", "input_pulldown",
|
||||
"GPMC_AD3", "gpio1_3", "input_pulldown",
|
||||
"GPMC_AD4", "gpio1_4", "input_pulldown",
|
||||
"GPMC_AD5", "gpio1_5", "input_pulldown",
|
||||
"GPMC_AD6", "gpio1_6", "input_pulldown",
|
||||
"GPMC_AD7", "gpio1_7", "input_pulldown",
|
||||
"GPMC_AD12", "gpio1_12", "input_pulldown",
|
||||
"GPMC_AD13", "gpio1_13", "input_pulldown",
|
||||
"GPMC_AD14", "gpio1_14", "input_pulldown",
|
||||
"GPMC_AD15", "gpio1_15", "input_pulldown",
|
||||
"GPMC_A0", "gpio1_16", "input_pulldown",
|
||||
"GPMC_A1", "gpio1_17", "input_pulldown",
|
||||
"GPMC_A5", "gpio1_21", "output", /* User LED 1 */
|
||||
"GPMC_A6", "gpio1_22", "output", /* User LED 2 */
|
||||
"GPMC_A7", "gpio1_23", "output", /* User LED 3 */
|
||||
"GPMC_A8", "gpio1_24", "output", /* User LED 4 */
|
||||
"GPMC_BEn1", "gpio1_28", "input_pulldown",
|
||||
"GPMC_CSn0", "gpio1_29", "input_pulldown",
|
||||
"GPMC_CSn1", "gpio1_30", "input_pulldown",
|
||||
"GPMC_CSn2", "gpio1_31", "input_pulldown",
|
||||
"GPMC_CLK", "gpio2_1", "input_pulldown",
|
||||
"LCD_DATA0", "gpio2_6", "input_pulldown",
|
||||
"LCD_DATA1", "gpio2_7", "input_pulldown",
|
||||
"LCD_DATA2", "gpio2_8", "input_pulldown",
|
||||
"LCD_DATA3", "gpio2_9", "input_pulldown",
|
||||
"LCD_DATA4", "gpio2_10", "input_pulldown",
|
||||
"LCD_DATA5", "gpio2_11", "input_pulldown",
|
||||
"LCD_DATA6", "gpio2_12", "input_pulldown",
|
||||
"LCD_DATA7", "gpio2_13", "input_pulldown",
|
||||
"LCD_VSYNC", "gpio2_22", "input_pulldown",
|
||||
"LCD_HSYNC", "gpio2_23", "input_pulldown",
|
||||
"LCD_PCLK", "gpio2_24", "input_pulldown",
|
||||
"LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown",
|
||||
"MCASP0_FSR", "gpio3_19", "input_pulldown",
|
||||
"MCASP0_AHCLKX", "gpio3_21", "input_pulldown",
|
||||
/* TIMERs */
|
||||
"GPMC_ADVn_ALE", "timer4", "output",
|
||||
"GPMC_BEn0_CLE", "timer5", "output",
|
||||
"GPMC_WEn", "timer6", "output",
|
||||
"GPMC_OEn_REn", "timer7", "output",
|
||||
/* PWM */
|
||||
"GPMC_A2", "ehrpwm1A", "output",
|
||||
"GPMC_A3", "ehrpwm1B", "output",
|
||||
"GPMC_AD8", "ehrpwm2A", "output",
|
||||
"GPMC_AD9", "ehrpwm2B", "output";
|
||||
};
|
||||
|
||||
prcm@44E00000 {
|
||||
compatible = "am335x,prcm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E00000 0x1300 >;
|
||||
};
|
||||
|
||||
dmtimers@44E05000 {
|
||||
compatible = "ti,am335x-dmtimer";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E05000 0x1000
|
||||
0x44E31000 0x1000
|
||||
0x48040000 0x1000
|
||||
0x48042000 0x1000
|
||||
0x48044000 0x1000
|
||||
0x48046000 0x1000
|
||||
0x48048000 0x1000
|
||||
0x4804A000 0x1000 >;
|
||||
interrupts = < 66 67 68 69 92 93 94 95 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
GPIO: gpio {
|
||||
#gpio-cells = <3>;
|
||||
compatible = "ti,gpio";
|
||||
gpio-controller;
|
||||
reg =< 0x44E07000 0x1000
|
||||
0x4804C000 0x1000
|
||||
0x481AC000 0x1000
|
||||
0x481AE000 0x1000 >;
|
||||
interrupts = < 96 97 98 99 32 33 62 63 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
|
||||
uart0: serial@44E09000 {
|
||||
compatible = "ns16550";
|
||||
reg = <0x44E09000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 72 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >; /* FIXME */
|
||||
};
|
||||
|
||||
edma3@49000000 {
|
||||
compatible = "ti,edma3";
|
||||
reg =< 0x49000000 0x100000 /* Channel Controller Regs */
|
||||
0x49800000 0x100000 /* Transfer Controller 0 Regs */
|
||||
0x49900000 0x100000 /* Transfer Controller 1 Regs */
|
||||
0x49a00000 0x100000 >; /* Transfer Controller 2 Regs */
|
||||
interrupts = <12 13 14>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
mmchs0@4809C000 {
|
||||
compatible = "ti,mmchs";
|
||||
reg =<0x48060000 0x1000 >;
|
||||
interrupts = <64>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
mmchs-device-id = <0>;
|
||||
};
|
||||
|
||||
enet0: ethernet@4A100000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ti,cpsw";
|
||||
reg = <0x4A100000 0x4000>;
|
||||
interrupts = <40 41 42 43>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
phy-handle = <&phy0>;
|
||||
mdio@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,cpsw-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@44e0b000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,i2c";
|
||||
reg =< 0x44e0b000 0x1000 >;
|
||||
interrupts = <70>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
i2c-device-id = <0>;
|
||||
am335x {
|
||||
i2c@44e0b000 {
|
||||
pmic@24 {
|
||||
compatible = "ti,am335x-pmic";
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
}
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user