Add RL_TWISTER_ENABLE option. This enables the magic bits to do long
cable tuning. This has helped in some installations for hardware deployed by a former employer. Made optional because the lists aren't full of complaints about these cards... even when they were wildly popular. Reviewed by: attilio@, jhb@, trhodes@ (all an older version of the patch)
This commit is contained in:
imp
parent
7e60f291b2
commit
6abe76f096
@ -672,6 +672,9 @@ ED_SIC opt_ed.h
|
||||
# bce driver
|
||||
BCE_DEBUG opt_bce.h
|
||||
|
||||
# rl driver
|
||||
RL_TWISTER_ENABLE opt_rl.h
|
||||
|
||||
SOCKBUF_DEBUG opt_global.h
|
||||
|
||||
# options for ubsec driver
|
||||
|
||||
@ -3,7 +3,7 @@
|
||||
.PATH: ${.CURDIR}/../../pci
|
||||
|
||||
KMOD= if_rl
|
||||
SRCS= if_rl.c device_if.h bus_if.h pci_if.h
|
||||
SRCS= if_rl.c device_if.h bus_if.h pci_if.h opt_rl.h
|
||||
SRCS+= miibus_if.h
|
||||
|
||||
.include <bsd.kmod.mk>
|
||||
|
||||
137
sys/pci/if_rl.c
137
sys/pci/if_rl.c
@ -85,6 +85,7 @@ __FBSDID("$FreeBSD$");
|
||||
|
||||
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
||||
#include "opt_device_polling.h"
|
||||
#include "opt_rl.h"
|
||||
#endif
|
||||
|
||||
#include <sys/param.h>
|
||||
@ -1383,19 +1384,143 @@ rl_txeof(struct rl_softc *sc)
|
||||
sc->rl_watchdog_timer = 0;
|
||||
}
|
||||
|
||||
#ifdef RL_TWISTER_ENABLE
|
||||
static void
|
||||
rl_twister_update(struct rl_softc *sc)
|
||||
{
|
||||
uint16_t linktest;
|
||||
/*
|
||||
* Table provided by RealTek (Kinston <shangh@realtek.com.tw>) for
|
||||
* Linux driver. Values undocumented otherwise.
|
||||
*/
|
||||
static const uint32_t param[4][4] = {
|
||||
{0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
|
||||
{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
|
||||
{0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
|
||||
{0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
|
||||
};
|
||||
|
||||
/*
|
||||
* Tune the so-called twister registers of the RTL8139. These
|
||||
* are used to compensate for impendence mismatches. The
|
||||
* method for tuning these registes is undocumented and the
|
||||
* following proceedure is collected from public sources.
|
||||
*/
|
||||
switch (sc->rl_twister)
|
||||
{
|
||||
case CHK_LINK:
|
||||
/*
|
||||
* If we have a sufficent link, then we can proceed in
|
||||
* the state machine to the next stage. If not, then
|
||||
* disable further tuning after writing sane defaults.
|
||||
*/
|
||||
if (CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_LINK_OK) {
|
||||
CSR_WRITE_2(sc, RL_CSCFG, RL_CSCFG_LINK_DOWN_OFF_CMD);
|
||||
sc->rl_twister = FIND_ROW;
|
||||
} else {
|
||||
CSR_WRITE_2(sc, RL_CSCFG, RL_CSCFG_LINK_DOWN_CMD);
|
||||
CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_CBL_TEST);
|
||||
CSR_WRITE_4(sc, RL_PARA78, RL_PARA78_DEF);
|
||||
CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_DEF);
|
||||
sc->rl_twister = DONE;
|
||||
}
|
||||
break;
|
||||
case FIND_ROW:
|
||||
/*
|
||||
* Read how long it took to see the echo to find the tuning
|
||||
* row to use.
|
||||
*/
|
||||
linktest = CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_STATUS;
|
||||
if (linktest == RL_CSCFG_ROW3)
|
||||
sc->rl_twist_row = 3;
|
||||
else if (linktest == RL_CSCFG_ROW2)
|
||||
sc->rl_twist_row = 2;
|
||||
else if (linktest == RL_CSCFG_ROW1)
|
||||
sc->rl_twist_row = 1;
|
||||
else
|
||||
sc->rl_twist_row = 0;
|
||||
sc->rl_twist_col = 0;
|
||||
sc->rl_twister = SET_PARAM;
|
||||
break;
|
||||
case SET_PARAM:
|
||||
if (sc->rl_twist_col == 0)
|
||||
CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_RESET);
|
||||
CSR_WRITE_4(sc, RL_PARA7C,
|
||||
param[sc->rl_twist_row][sc->rl_twist_col]);
|
||||
if (++sc->rl_twist_col == 4) {
|
||||
if (sc->rl_twist_row == 3)
|
||||
sc->rl_twister = RECHK_LONG;
|
||||
else
|
||||
sc->rl_twister = DONE;
|
||||
}
|
||||
break;
|
||||
case RECHK_LONG:
|
||||
/*
|
||||
* For long cables, we have to double check to make sure we
|
||||
* don't mistune.
|
||||
*/
|
||||
linktest = CSR_READ_2(sc, RL_CSCFG) & RL_CSCFG_STATUS;
|
||||
if (linktest == RL_CSCFG_ROW3)
|
||||
sc->rl_twister = DONE;
|
||||
else {
|
||||
CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_RETUNE);
|
||||
sc->rl_twister = RETUNE;
|
||||
}
|
||||
break;
|
||||
case RETUNE:
|
||||
/* Retune for a shorter cable (try column 2) */
|
||||
CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_CBL_TEST);
|
||||
CSR_WRITE_4(sc, RL_PARA78, RL_PARA78_DEF);
|
||||
CSR_WRITE_4(sc, RL_PARA7C, RL_PARA7C_DEF);
|
||||
CSR_WRITE_4(sc, RL_NWAYTST, RL_NWAYTST_RESET);
|
||||
sc->rl_twist_row--;
|
||||
sc->rl_twist_col = 0;
|
||||
sc->rl_twister = SET_PARAM;
|
||||
break;
|
||||
|
||||
case DONE:
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
static void
|
||||
rl_tick(void *xsc)
|
||||
{
|
||||
struct rl_softc *sc = xsc;
|
||||
struct mii_data *mii;
|
||||
int ticks;
|
||||
|
||||
RL_LOCK_ASSERT(sc);
|
||||
/*
|
||||
* If we're doing the twister cable calibration, then we need to defer
|
||||
* watchdog timeouts. This is a no-op in normal operations, but
|
||||
* can falsely trigger when the cable calibration takes a while and
|
||||
* there was traffic ready to go when rl was started.
|
||||
*
|
||||
* We don't defer mii_tick since that updates the mii status, which
|
||||
* helps the twister process, at least according to similar patches
|
||||
* for the Linux driver I found online while doing the fixes. Worst
|
||||
* case is a few extra mii reads during calibration.
|
||||
*/
|
||||
mii = device_get_softc(sc->rl_miibus);
|
||||
mii_tick(mii);
|
||||
|
||||
#ifdef RL_TWISTER_ENABLE
|
||||
if (sc->rl_twister == DONE)
|
||||
rl_watchdog(sc);
|
||||
else
|
||||
rl_twister_update(sc);
|
||||
if (sc->rl_twister == DONE)
|
||||
ticks = hz;
|
||||
else
|
||||
ticks = hz / 10;
|
||||
#else
|
||||
rl_watchdog(sc);
|
||||
ticks = hz;
|
||||
#endif
|
||||
|
||||
callout_reset(&sc->rl_stat_callout, hz, rl_tick, sc);
|
||||
callout_reset(&sc->rl_stat_callout, ticks, rl_tick, sc);
|
||||
}
|
||||
|
||||
#ifdef DEVICE_POLLING
|
||||
@ -1643,6 +1768,14 @@ rl_init_locked(struct rl_softc *sc)
|
||||
rl_stop(sc);
|
||||
|
||||
rl_reset(sc);
|
||||
#ifdef RL_TWISTER_ENABLE
|
||||
/*
|
||||
* Reset twister register tuning state. The twister registers
|
||||
* and their tuning are undocumented, but are necessary to cope
|
||||
* with bad links. rl_twister = DONE here will disable this entirely.
|
||||
*/
|
||||
sc->rl_twister = CHK_LINK;
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Init our MAC address. Even though the chipset
|
||||
|
||||
@ -308,6 +308,27 @@
|
||||
#define RL_CMD_RX_ENB 0x0008
|
||||
#define RL_CMD_RESET 0x0010
|
||||
|
||||
/*
|
||||
* Twister register values. These are completely undocumented and derived
|
||||
* from public sources.
|
||||
*/
|
||||
#define RL_CSCFG_LINK_OK 0x0400
|
||||
#define RL_CSCFG_CHANGE 0x0800
|
||||
#define RL_CSCFG_STATUS 0xf000
|
||||
#define RL_CSCFG_ROW3 0x7000
|
||||
#define RL_CSCFG_ROW2 0x3000
|
||||
#define RL_CSCFG_ROW1 0x1000
|
||||
#define RL_CSCFG_LINK_DOWN_OFF_CMD 0x03c0
|
||||
#define RL_CSCFG_LINK_DOWN_CMD 0xf3c0
|
||||
|
||||
#define RL_NWAYTST_RESET 0
|
||||
#define RL_NWAYTST_CBL_TEST 0x20
|
||||
|
||||
#define RL_PARA78 0x78
|
||||
#define RL_PARA78_DEF 0x78fa8388
|
||||
#define RL_PARA7C 0x7C
|
||||
#define RL_PARA7C_DEF 0xcb38de43
|
||||
#define RL_PARA7C_RETUNE 0xfb38de03
|
||||
/*
|
||||
* EEPROM control register
|
||||
*/
|
||||
@ -809,6 +830,10 @@ struct rl_list_data {
|
||||
bus_addr_t rl_tx_list_addr;
|
||||
};
|
||||
|
||||
#ifdef RL_TWISTER_ENABLE
|
||||
enum rl_twist { DONE, CHK_LINK, FIND_ROW, SET_PARAM, RECHK_LONG, RETUNE };
|
||||
#endif
|
||||
|
||||
struct rl_softc {
|
||||
struct ifnet *rl_ifp; /* interface info */
|
||||
bus_space_handle_t rl_bhandle; /* bus space handle */
|
||||
@ -837,6 +862,11 @@ struct rl_softc {
|
||||
uint32_t rl_rxlenmask;
|
||||
int rl_testmode;
|
||||
int rl_if_flags;
|
||||
#ifdef RL_TWISTER_ENABLE
|
||||
enum rl_twist rl_twister;
|
||||
int rl_twist_row;
|
||||
int rl_twist_col;
|
||||
#endif
|
||||
int suspended; /* 0 = normal 1 = suspended */
|
||||
#ifdef DEVICE_POLLING
|
||||
int rxcycles;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user