dts: Import files from Linux 5.1

MFC after:	2 months

sys/gnu/dts/arm/alphascale-asm9260.dtsi

@@ -4,10 +4,11 @@
  * Licensed under the X11 license or the GPL v2 (or later)
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/alphascale,asm9260.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&icoll>;
 
 	memory {

sys/gnu/dts/arm/alpine.dtsi

@@ -25,12 +25,18 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	/* SOC compatibility */
 	compatible = "al,alpine";
 
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
 	/* CPU Configuration */
 	cpus {
 		#address-cells = <1>;

sys/gnu/dts/arm/am335x-baltos-ir2110.dts

@@ -72,7 +72,3 @@
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

sys/gnu/dts/arm/am335x-baltos-ir3220.dts

@@ -114,7 +114,3 @@
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

sys/gnu/dts/arm/am335x-baltos-ir5221.dts

@@ -133,10 +133,6 @@
 	phy-handle = <&phy1>;
 };
 
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
-
 &dcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins>;

sys/gnu/dts/arm/am335x-chiliboard.dts

@@ -14,6 +14,10 @@
 	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
 		     "ti,am33xx";
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -151,10 +155,6 @@
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* USB */
 &usb {
 	status = "okay";

sys/gnu/dts/arm/am335x-evm.dts

@@ -57,6 +57,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79501 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS79501 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
@@ -499,10 +517,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
+		AVDD-supply = <&v3_3d_reg>;
-		IOVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
-		DRVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
-		DVDD-supply = <&vbat>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 

sys/gnu/dts/arm/am335x-evmsk.dts

@@ -73,6 +73,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79518 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS78633 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -501,10 +519,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
+		AVDD-supply = <&v3_3d_reg>;
-		IOVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
-		DRVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
-		DVDD-supply = <&vbat>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 

sys/gnu/dts/arm/am335x-guardian.dts

@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Bosch AM335x Guardian";
+	compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		button21 {
+			label = "guardian-power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 21 0>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led1 {
+			label = "green:heartbeat";
+			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:mmc0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		display-timings {
+			320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <68>;
+				hfront-porch    = <20>;
+				hsync-len       = <1>;
+				vback-porch     = <18>;
+				vfront-porch    = <4>;
+				vsync-len       = <1>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <24>;
+			bus-width         = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+	};
+
+	pwm7: dmtimer-pwm {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dmtimer7_pins>;
+	};
+
+	vmmcsd_fixed: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		/*
+		 * MTD partition table
+		 *
+		 * All SPL-* partitions are sized to minimal length which can
+		 * be independently programmable. For NAND flash this is equal
+		 * to size of erase-block.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0x0 0x40000>;
+		};
+
+		partition@1 {
+			label = "SPL.backup1";
+			reg = <0x40000  0x40000>;
+		};
+
+		partition@2 {
+			label = "SPL.backup2";
+			reg = <0x80000  0x40000>;
+		};
+
+		partition@3 {
+			label = "SPL.backup3";
+			reg = <0xc0000  0x40000>;
+		};
+
+		partition@4 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+
+		partition@5 {
+			label = "u-boot.backup1";
+			reg = <0x200000 0x100000>;
+		};
+
+		partition@6 {
+			label = "u-boot-env";
+			reg = <0x300000 0x40000>;
+		};
+
+		partition@7 {
+			label = "u-boot-env.backup1";
+			reg = <0x340000 0x40000>;
+		};
+
+		partition@8 {
+			label = "UBI";
+			reg = <0x380000 0x1fc80000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&lcdc {
+	blue-and-red-wiring = "crossed";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&spi0 {
+	ti,pindir-d0-out-d1-in;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NMI */
+
+	backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+		default-brightness = <100>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &gpio_pins>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	dmtimer7_pins: pinmux_dmtimer7_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+		>;
+	};
+
+	gpio_keys_pins: pinmux_gpio_keys_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	gpio_pins: pinmux_gpio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	lcd_disen_pins: pinmux_lcd_disen_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_default: pinmux_lcd_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+};

sys/gnu/dts/arm/am335x-icev2.dts

@@ -484,10 +484,6 @@
 	dual_emac;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;

sys/gnu/dts/arm/am335x-igep0033.dtsi

@@ -123,10 +123,6 @@
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &elm {
 	status = "okay";
 };

sys/gnu/dts/arm/am335x-lxm.dts

@@ -328,10 +328,6 @@
 	dual_emac_res_vlan = <3>;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

sys/gnu/dts/arm/am335x-moxa-uc-2100-common.dtsi

@@ -159,11 +159,6 @@
 	status = "okay";
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

sys/gnu/dts/arm/am335x-moxa-uc-8100-me-t.dts

@@ -446,11 +446,6 @@
 	dual_emac_res_vlan = <2>;
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

sys/gnu/dts/arm/am335x-phycore-som.dtsi

@@ -100,10 +100,6 @@
 	status = "okay";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* I2C Busses */
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {

sys/gnu/dts/arm/am335x-shc.dts

@@ -1,11 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * support for the bosch am335x based shc c3 board
  *
  * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 

sys/gnu/dts/arm/am33xx-l4.dtsi

@@ -279,17 +279,9 @@
 				#pinctrl-cells = <1>;
 				ranges = <0 0 0x2000>;
 
-				phy_sel: cpsw-phy-sel@650 {
-					compatible = "ti,am3352-cpsw-phy-sel";
-					reg= <0x650 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				am33xx_pinmux: pinmux@800 {
 					compatible = "pinctrl-single";
 					reg = <0x800 0x238>;
-					#address-cells = <1>;
-					#size-cells = <0>;
 					#pinctrl-cells = <1>;
 					pinctrl-single,register-width = <32>;
 					pinctrl-single,function-mask = <0x7f>;
@@ -302,6 +294,12 @@
 					#size-cells = <1>;
 					ranges = <0 0 0x800>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -717,7 +715,6 @@
 				interrupts = <40 41 42 43>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 				status = "disabled";
 
 				davinci_mdio: mdio@1000 {
@@ -733,11 +730,13 @@
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 1>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 1>;
 				};
 			};
 		};
@@ -1763,7 +1762,7 @@
 			reg = <0xcc000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>;
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1786,7 +1785,7 @@
 			reg = <0xd0000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>;
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;

sys/gnu/dts/arm/am3874-iceboard.dts

@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Winterland IceBoard
+ *
+ * http://mcgillcosmology.com
+ * http://threespeedlogic.com
+ *
+ * This is an ARM + FPGA instrumentation board used at telescopes in
+ * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
+ * observatory in British Columbia (CHIME).
+ *
+ * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
+ */
+
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Winterland IceBoard";
+	compatible = "ti,dm8148", "ti,dm814";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* The MAC provides internal delay for the transmit path ONLY, which is enabled
+ * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
+ *
+ * The receive path is delayed at the PHY. The recommended register settings
+ * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
+ * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
+ * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
+ * obtain the correct register settings.
+ */
+&mac { dual_emac = <1>; };
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0x2>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0x1>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc1 { status = "disabled"; };
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+&mmc3 { status = "disabled"; };
+
+&i2c1 {
+	/* Most I2C activity happens through this port, with the sole exception
+	 * of the backplane. Since there are multiply assigned addresses, the
+	 * "i2c-mux-idle-disconnect" is important.
+	 */
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			/* FMC A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@1 {
+			/* FMC B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@2 {
+			/* QSFP A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@3 {
+			/* QSFP B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@4 {
+			/* SFP */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			i2c-mux-idle-disconnect;
+
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
+			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
+			ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
+
+			ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
+			ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
+			ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
+
+			ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
+			ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
+			ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
+			ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
+			ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
+			ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
+			ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
+			ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
+			ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
+		};
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			i2c-mux-idle-disconnect;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			i2c-mux-idle-disconnect;
+
+			u41: pca9575@20 {
+				compatible = "nxp,pca9575";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
+					"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
+					"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
+					"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
+				reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u42: pca9575@21 {
+				compatible = "nxp,pca9575";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
+					"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
+					"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
+					"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
+				reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u48: pca9575@22 {
+				compatible = "nxp,pca9575";
+				reg=<0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
+					<&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
+				led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
+					<&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
+
+				gpio-line-names =
+					"GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
+					"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
+					"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
+					"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
+				reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u59: pca9575@23 {
+				compatible = "nxp,pca9575";
+				reg=<0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
+					"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
+					"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
+					"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
+				reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
+			tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
+			tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
+			tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
+
+			/* EEPROM bank and serial number are treated as separate devices */
+			at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+			at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+		};
+	};
+};
+
+&i2c2 {
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			multi-master;
+
+			/* All backplanes should have this -- it's how we know they're there. */
+			at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
+			at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+
+			/* 16 slot backplane */
+			tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
+			tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
+			amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
+
+			/* Single slot backplane */
+		};
+	};
+};
+
+&pincntl {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x0928, PIN_INPUT | 0x40)	/* SD1_SDWP */
+			DM814X_IOPAD(0x093C, PIN_INPUT | 0x2)	/* SD1_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80)	/* PROGRAM_B */
+			DM814X_IOPAD(0x0820, PIN_INPUT | 0x80)	/* INIT_B */
+			DM814X_IOPAD(0x0824, PIN_INPUT | 0x80)	/* DONE */
+
+			DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
+			DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
+			DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
+			DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
+			DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
+
+			DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
+			DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
+			DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
+			DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
+			DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
+
+			DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
+			DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
+			DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
+			DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
+			>;
+	};
+
+	gpio2_pins: pinmux_gpio2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
+			DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
+			DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
+			DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
+
+			//DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
+			//DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
+			DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			/* The PLL doesn't react well to the SPI controller reset, so
+			 * we force the CS lines to pull up as GPIOs until we're ready.
+			 * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
+			 */
+			DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
+			DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
+			DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
+			DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
+			DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
+			DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
+			DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
+		>;
+	};
+
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0a7c, 0x20)
+			DM814X_IOPAD(0x0b74, 0x20)
+			DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
+			DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
+			DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
+		>;
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+	gpio-line-names =
+		"", "PROGRAM_B", "INIT_B", "DONE",			/* 0-3 */
+		"", "", "", "",						/* 4-7 */
+		"FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI",		/* 8-11 */
+		"", "", "", "FMCA_TRST",				/* 12-15 */
+		"FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI",		/* 16-19 */
+		"FMCB_TRST", "", "", "",				/* 20-23 */
+		"FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI",		/* 24-27 */
+		"", "", "", "";						/* 28-31 */
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio2_pins>;
+	gpio-line-names =
+		"PHYA_IRQ_N", "PHYA_RESET_N", "", "",			/* 0-3 */
+		"", "", "", "PHYB_IRQ_N",				/* 4-7 */
+		"PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", "";		/* 8-11 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	/*pinctrl-0 = <&gpio3_pins>;*/
+	gpio-line-names =
+		"", "", "ARMClkSel0", "",				/* 0-3 */
+		"EnFPGARef", "", "", "ARMClkSel1";			/* 4-7 */
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+	gpio-line-names =
+		"BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
+		"BP_ARM_GPIO4", "BP_ARM_GPIO5";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
+
+&mcspi1 {
+	s25fl256@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		fsbl@0 {
+			/* 256 kB */
+			label = "U-Boot-min";
+			reg = <0 0x40000>;
+		};
+		ssbl@1 {
+			/* 512 kB */
+			label = "U-Boot";
+			reg = <0x40000 0x80000>;
+		};
+		bootenv@2 {
+			/* 256 kB */
+			label = "U-Boot Env";
+			reg = <0xc0000 0x40000>;
+		};
+		kernel@3 {
+			/* 4 MB */
+			label = "Kernel";
+			reg = <0x100000 0x400000>;
+		};
+		ipmi@4 {
+			label = "IPMI FRU";
+			reg = <0x500000 0x40000>;
+		};
+		fs@5 {
+			label = "File System";
+			reg = <0x540000 0x1ac0000>;
+		};
+	};
+};
+
+&mcspi3 {
+	/* DMA event numbers stolen from MCASP */
+	dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
+		&edma_xbar 10 0 18 &edma_xbar 11 0 19>;
+	dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	/* DMA event numbers stolen from MCASP, MCBSP */
+	dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
+	dma-names = "tx0", "rx0";
+};

sys/gnu/dts/arm/am437x-gp-evm.dts

@@ -71,7 +71,7 @@
 		pinctrl-0 = <&matrix_keypad_default>;
 		pinctrl-1 = <&matrix_keypad_sleep>;
 
-		linux,wakeup;
+		wakeup-source;
 
 		row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
 				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */

sys/gnu/dts/arm/am437x-l4.dtsi

@@ -280,12 +280,6 @@
 				#size-cells = <1>;
 				ranges = <0 0 0x4000>;
 
-				phy_sel: cpsw-phy-sel@650 {
-					compatible = "ti,am43xx-cpsw-phy-sel";
-					reg= <0x650 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				am43xx_pinmux: pinmux@800 {
 					compatible = "ti,am437-padconf",
 						     "pinctrl-single";
@@ -300,11 +294,17 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am43xx-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -555,7 +555,6 @@
 				cpts_clock_shift = <29>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 
 				davinci_mdio: mdio@1000 {
 					compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
@@ -572,11 +571,13 @@
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 0>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 0>;
 				};
 			};
 		};

sys/gnu/dts/arm/am43x-epos-evm.dts

@@ -584,10 +584,7 @@
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-};
+	phys = <&phy_gmii_sel 1 1>;
-
-&phy_sel {
-	rmii-clock-ext;
 };
 
 &i2c0 {

sys/gnu/dts/arm/arm-realview-eb.dtsi

@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-eb";
 
 	chosen { };
@@ -38,6 +39,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

sys/gnu/dts/arm/arm-realview-pb1176.dts

@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB1176";
 	compatible = "arm,realview-pb1176";
 
@@ -40,6 +41,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

sys/gnu/dts/arm/arm-realview-pb11mp.dts

@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB11MPcore";
 	compatible = "arm,realview-pb11mp";
 
@@ -39,6 +40,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/*
 		 * The PB11MPCore has 512 MiB memory @ 0x70000000
 		 * and the first 256 are also remapped @ 0x00000000

sys/gnu/dts/arm/arm-realview-pbx.dtsi

@@ -22,9 +22,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "arm,realview-pbx";
 
 	chosen { };
@@ -39,6 +40,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};

sys/gnu/dts/arm/armada-370-rd.dts

@@ -114,48 +114,6 @@
 			};
 		};
 	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x10 0>;	/* MDIO address 16, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			port@1 {
-			       reg = <1>;
-			       label = "lan1";
-			};
-
-			port@2 {
-			       reg = <2>;
-			       label = "lan2";
-			};
-
-			port@3 {
-			       reg = <3>;
-			       label = "lan3";
-			};
-
-			port@5 {
-			      reg = <5>;
-			      label = "cpu";
-			};
-		};
-	 };
 };
 
 &pciec {

sys/gnu/dts/arm/armada-388-clearfog.dts

@@ -30,64 +30,6 @@
 		};
 	};
 
-	dsa@0 {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4 0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&rear_button_pins>;

sys/gnu/dts/arm/armada-388-clearfog.dtsi

@@ -93,6 +93,7 @@
 	bm,pool-long = <2>;
 	bm,pool-short = <1>;
 	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
 	phy-mode = "sgmii";
 	status = "okay";
 };
@@ -103,6 +104,7 @@
 	bm,pool-short = <1>;
 	buffer-manager = <&bm>;
 	managed = "in-band-status";
+	phys = <&comphy5 2>;
 	phy-mode = "sgmii";
 	sfp = <&sfp>;
 	status = "okay";

sys/gnu/dts/arm/armada-38x.dtsi

@@ -9,13 +9,15 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 38x family SoC";
 	compatible = "marvell,armada380";
 
@@ -335,6 +337,43 @@
 				#clock-cells = <1>;
 			};
 
+			comphy: phy@18300 {
+				compatible = "marvell,armada-380-comphy";
+				reg = <0x18300 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
 			coreclk: mvebu-sar@18600 {
 				compatible = "marvell,armada-380-core-clock";
 				reg = <0x18600 0x04>;

sys/gnu/dts/arm/armada-39x.dtsi

@@ -7,13 +7,14 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Armada 39x family SoC";
 	compatible = "marvell,armada390";
 

sys/gnu/dts/arm/armada-xp-linksys-mamba.dts

@@ -210,53 +210,6 @@
 		compatible = "pwm-fan";
 		pwms = <&gpio0 24 4000>;
 	};
-
-	dsa {
-		status = "disabled";
-
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan4";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan3";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
 };
 
 &pciec {

sys/gnu/dts/arm/artpec6.dtsi

@@ -43,9 +43,10 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/dma/nbpfaxi.h>
 #include <dt-bindings/clock/axis,artpec6-clkctrl.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "axis,artpec6";
 	interrupt-parent = <&intc>;
 

sys/gnu/dts/arm/aspeed-bmc-arm-stardragon4800-rep2.dts

@@ -173,6 +173,16 @@
 			};
 		};
 	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
 };
 
 &i2c9 {

sys/gnu/dts/arm/aspeed-bmc-facebook-tiogapass.dts

@@ -21,6 +21,17 @@
 	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+					<&adc 4>, <&adc 5>, <&adc 6>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
 };
 
 &fmc {
@@ -43,6 +54,16 @@
 	};
 };
 
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
 &uart1 {
 	// Host Console
 	status = "okay";
@@ -51,11 +72,33 @@
 		     &pinctrl_rxd1_default>;
 };
 
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
 &uart5 {
 	// BMC Console
 	status = "okay";
 };
 
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	kcs_addr = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	kcs_addr = <0xca2>;
+};
+
 &mac0 {
 	status = "okay";
 
@@ -64,6 +107,10 @@
 	use-ncsi;
 };
 
+&adc {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
@@ -122,6 +169,10 @@
 
 &i2c8 {
 	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
 	//Mezz Sensor SMBus
 };
 
@@ -140,7 +191,7 @@
 	};
 
 	fan@1 {
-		reg = <0x00>;
+		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
 	};
 };

sys/gnu/dts/arm/aspeed-bmc-inspur-on5263m5.dts

@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlyprintk";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};

sys/gnu/dts/arm/aspeed-bmc-opp-palmetto.dts

@@ -169,6 +169,11 @@
 
 &i2c3 {
 	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
 };
 
 &i2c4 {

sys/gnu/dts/arm/aspeed-bmc-quanta-q71l.dts

@@ -116,6 +116,10 @@
 	status = "okay";
 };
 
+&lpc_ctrl {
+	status = "okay";
+};
+
 &lpc_snoop {
 	status = "okay";
 	snoop-ports = <0x80>;
@@ -134,6 +138,10 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
+&uart1 {
+	status = "okay";
+};
+
 &uart5 {
 	status = "okay";
 };

sys/gnu/dts/arm/aspeed-g4.dtsi

@@ -197,6 +197,7 @@
 				gpio-ranges = <&pinctrl 0 0 220>;
 				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			timer: timer@1e782000 {

sys/gnu/dts/arm/aspeed-g5.dtsi

@@ -47,6 +47,13 @@
 		reg = <0x80000000 0>;
 	};
 
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2500-sdram-edac";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <0>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -250,6 +257,7 @@
 				gpio-ranges = <&pinctrl 0 0 220>;
 				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			timer: timer@1e782000 {
@@ -330,8 +338,32 @@
 				ranges = <0x0 0x1e789000 0x1000>;
 
 				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc";
+					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
 					reg = <0x0 0x80>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x0 0x80>;
+
+					kcs1: kcs1@0 {
+						compatible = "aspeed,ast2500-kcs-bmc";
+						interrupts = <8>;
+						kcs_chan = <1>;
+						status = "disabled";
+					};
+					kcs2: kcs2@0 {
+						compatible = "aspeed,ast2500-kcs-bmc";
+						interrupts = <8>;
+						kcs_chan = <2>;
+						status = "disabled";
+					};
+					kcs3: kcs3@0 {
+						compatible = "aspeed,ast2500-kcs-bmc";
+						interrupts = <8>;
+						kcs_chan = <3>;
+						status = "disabled";
+					};
 				};
 
 				lpc_host: lpc-host@80 {
@@ -343,6 +375,13 @@
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
+					kcs4: kcs4@0 {
+						compatible = "aspeed,ast2500-kcs-bmc";
+						interrupts = <8>;
+						kcs_chan = <4>;
+						status = "disabled";
+					};
+
 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2500-lpc-ctrl";
 						reg = <0x0 0x80>;

sys/gnu/dts/arm/at91-nattis-2-natte-2.dts

@@ -22,7 +22,7 @@
 		wakeup {
 			label = "Wakeup";
 			linux,code = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
 		};
 	};

sys/gnu/dts/arm/at91-sama5d27_som1.dtsi

@@ -62,6 +62,20 @@
 
 	ahb {
 		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+				};
+			};
+
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default>;
@@ -78,6 +92,22 @@
 
 			pinctrl@fc038000 {
 
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
 				pinctrl_macb0_default: macb0_default {
 					pinmux = <PIN_PD9__GTXCK>,
 						 <PIN_PD10__GTXEN>,

sys/gnu/dts/arm/at91-sama5d27_som1_ek.dts

@@ -109,6 +109,10 @@
 				status = "okay";
 			};
 
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
 			spi0: spi@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0_default>;

sys/gnu/dts/arm/at91-wb45n.dts

@@ -22,7 +22,7 @@
 			label = "IRQBTN";
 			linux,code = <99>;
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 		};
 	};
 };

sys/gnu/dts/arm/at91-wb50n.dts

@@ -23,7 +23,7 @@
 			label = "BTNESC";
 			linux,code = <1>; /* ESC button */
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 		};
 
 		irqbtn@31 {
@@ -31,7 +31,7 @@
 			label = "IRQBTN";
 			linux,code = <99>; /* SysReq button */
 			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 		};
 	};
 

sys/gnu/dts/arm/at91rm9200.dtsi

@@ -10,13 +10,14 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91RM9200 family SoC";
 	compatible = "atmel,at91rm9200";
 	interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

sys/gnu/dts/arm/at91sam9260.dtsi

@@ -8,13 +8,14 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9260 family SoC";
 	compatible = "atmel,at91sam9260";
 	interrupt-parent = <&aic>;
@@ -46,6 +47,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

sys/gnu/dts/arm/at91sam9261.dtsi

@@ -6,13 +6,14 @@
  * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9261 family SoC";
 	compatible = "atmel,at91sam9261";
 	interrupt-parent = <&aic>;
@@ -43,6 +44,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/at91sam9263.dtsi

@@ -6,13 +6,14 @@
  * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9263 family SoC";
 	compatible = "atmel,at91sam9263";
 	interrupt-parent = <&aic>;
@@ -45,6 +46,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/at91sam9g45.dtsi

@@ -9,7 +9,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9G45 family SoC";
 	compatible = "atmel,at91sam9g45";
 	interrupt-parent = <&aic>;
@@ -51,6 +52,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x70000000 0x10000000>;
 	};
 

sys/gnu/dts/arm/at91sam9n12.dtsi

@@ -7,7 +7,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9N12 SoC";
 	compatible = "atmel,at91sam9n12";
 	interrupt-parent = <&aic>;
@@ -47,6 +48,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 

sys/gnu/dts/arm/at91sam9rl.dtsi

@@ -7,7 +7,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -15,6 +14,8 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9RL family SoC";
 	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
 	interrupt-parent = <&aic>;
@@ -48,6 +49,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 

sys/gnu/dts/arm/at91sam9x5.dtsi

@@ -9,7 +9,6 @@
  * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -17,6 +16,8 @@
 #include <dt-bindings/clock/at91.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9x5 family SoC";
 	compatible = "atmel,at91sam9x5";
 	interrupt-parent = <&aic>;
@@ -49,6 +50,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 

sys/gnu/dts/arm/atlas6-evb.dts

@@ -15,6 +15,7 @@
 	compatible = "sirf,atlas6-cb", "sirf,atlas6";
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};
 

sys/gnu/dts/arm/atlas6.dtsi

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 / {
 	compatible = "sirf,atlas6";
 	#address-cells = <1>;

sys/gnu/dts/arm/atlas7.dtsi

@@ -6,7 +6,6 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
 / {
 	compatible = "sirf,atlas7";
 	#address-cells = <1>;

sys/gnu/dts/arm/axm55xx.dtsi

@@ -12,9 +12,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/lsi,axm5516-clks.h>
 
-#include "skeleton64.dtsi"
-
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
 	aliases {

sys/gnu/dts/arm/bcm-cygnus.dtsi

@@ -34,9 +34,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/bcm-cygnus.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,cygnus";
 	model = "Broadcom Cygnus SoC";
 	interrupt-parent = <&gic>;
@@ -45,6 +45,11 @@
 		ethernet0 = &eth0;
 	};
 
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;

sys/gnu/dts/arm/bcm-nsp.dtsi

@@ -34,9 +34,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/bcm-nsp.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,nsp";
 	model = "Broadcom Northstar Plus SoC";
 	interrupt-parent = <&gic>;

sys/gnu/dts/arm/bcm11351.dtsi

@@ -16,9 +16,9 @@
 
 #include "dt-bindings/clock/bcm281xx.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM11351 SoC";
 	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;

sys/gnu/dts/arm/bcm21664-garnet.dts

@@ -22,6 +22,7 @@
 	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 

sys/gnu/dts/arm/bcm21664.dtsi

@@ -16,9 +16,9 @@
 
 #include "dt-bindings/clock/bcm21664.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM21664 SoC";
 	compatible = "brcm,bcm21664";
 	interrupt-parent = <&gic>;

sys/gnu/dts/arm/bcm23550-sparrow.dts

@@ -46,6 +46,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 };

sys/gnu/dts/arm/bcm23550.dtsi

@@ -36,9 +36,9 @@
 /* BCM23550 and BCM21664 have almost identical clocks */
 #include "dt-bindings/clock/bcm21664.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM23550 SoC";
 	compatible = "brcm,bcm23550";
 	interrupt-parent = <&gic>;

sys/gnu/dts/arm/bcm28155-ap.dts

@@ -22,6 +22,7 @@
 	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
 
 	memory {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 

sys/gnu/dts/arm/bcm2835-rpi-a-plus.dts

@@ -31,8 +31,8 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "SDA0",
+	gpio-line-names = "ID_SDA",
-			  "SCL0",
+			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",

sys/gnu/dts/arm/bcm2835-rpi-b-plus.dts

@@ -33,8 +33,8 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "SDA0",
+	gpio-line-names = "ID_SDA",
-			  "SCL0",
+			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",

sys/gnu/dts/arm/bcm2835-rpi-b-rev2.dts

@@ -93,7 +93,7 @@
 };
 
 &hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
 };
 
 &pwm {

sys/gnu/dts/arm/bcm2835-rpi-zero-w.dts

@@ -25,8 +25,6 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl_on>;
 		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 	};
 };
@@ -40,8 +38,8 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "GPIO0",
+	gpio-line-names = "ID_SDA",
-			  "GPIO1",
+			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",
@@ -98,11 +96,6 @@
 			  "SD_DATA3_R";
 
 	pinctrl-0 = <&gpioout &alt0>;
-
-	wl_on: wl-on {
-		brcm,pins = <41>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
 };
 
 &hdmi {

sys/gnu/dts/arm/bcm2835-rpi-zero.dts

@@ -28,8 +28,8 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "SDA0",
+	gpio-line-names = "ID_SDA",
-			  "SCL0",
+			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",

sys/gnu/dts/arm/bcm2835-rpi.dtsi

@@ -1,7 +1,7 @@
 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
@@ -19,8 +19,6 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
-			#address-cells = <0>;
-			#size-cells = <0>;
 			mboxes = <&mailbox>;
 		};
 
@@ -87,10 +85,6 @@
 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
 };
 
-&v3d {
-	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-};
-
 &hdmi {
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";

sys/gnu/dts/arm/bcm2836-rpi-2-b.dts

@@ -9,7 +9,7 @@
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
 	model = "Raspberry Pi 2 Model B";
 
-	memory {
+	memory@0 {
 		reg = <0 0x40000000>;
 	};
 
@@ -28,6 +28,72 @@
 };
 
 &gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETHCLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */

sys/gnu/dts/arm/bcm2837-rpi-3-a-plus.dts

@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		reg = <0 0x20000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/*
+ * SDHCI is used to control the SDIO for wireless
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};

sys/gnu/dts/arm/bcm2837-rpi-3-b-plus.dts

@@ -14,7 +14,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0 0x40000000>;
 	};
 
@@ -42,7 +42,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED",
+				  "STATUS_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
@@ -52,6 +52,76 @@
 	};
 };
 
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
 &hdmi {
 	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 };

sys/gnu/dts/arm/bcm2837-rpi-3-b.dts

@@ -14,7 +14,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0 0x40000000>;
 	};
 
@@ -39,7 +39,7 @@
 				  "WL_ON",
 				  "STATUS_LED",
 				  "LAN_RUN",
-				  "HPD_N",
+				  "HDMI_HPD_N",
 				  "CAM_GPIO0",
 				  "CAM_GPIO1",
 				  "PWR_LOW_N";
@@ -47,6 +47,76 @@
 	};
 };
 
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETHCLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;

sys/gnu/dts/arm/bcm2837-rpi-cm3.dtsi

@@ -4,7 +4,7 @@
 #include "bcm2836-rpi.dtsi"
 
 / {
-	memory {
+	memory@0 {
 		reg = <0 0x40000000>;
 	};
 

sys/gnu/dts/arm/bcm283x.dtsi

@@ -3,6 +3,7 @@
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
 
 /* firmware-provided startup stubs live here, where the secondary CPUs are
  * spinning.
@@ -120,9 +121,18 @@
 			#interrupt-cells = <2>;
 		};
 
-		watchdog@7e100000 {
+		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
 		};
 
 		clocks: cprman@7e101000 {
@@ -629,6 +639,7 @@
 			compatible = "brcm,bcm2835-v3d";
 			reg = <0x7ec00000 0x1000>;
 			interrupts = <1 10>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
 		};
 
 		vc4: gpu {

sys/gnu/dts/arm/bcm47081-asus-rt-n18u.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47081-buffalo-wzr-600dhp2.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47081-buffalo-wzr-900dhp.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47081-luxul-xap-1410.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47081-luxul-xwr-1200.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47081-tplink-archer-c5-v2.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47094-dlink-dir-885l.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47094-linksys-panamera.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47094-luxul-abr-4500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

sys/gnu/dts/arm/bcm47094-luxul-xap-1610.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47094-luxul-xbr-4500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

sys/gnu/dts/arm/bcm47094-luxul-xwr-3100.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm47094-luxul-xwr-3150-v1.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

sys/gnu/dts/arm/bcm47094-netgear-r8500.dts

@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

sys/gnu/dts/arm/bcm47094-phicomm-k3.dts

@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Phicomm K3";
+
+	memory {
+		reg = <0x00000000 0x08000000
+		       0x88000000 0x18000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x0080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "phicomm";
+			reg = <0x0180000 0x0280000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "firmware";
+			reg = <0x0400000 0x7C00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};

sys/gnu/dts/arm/bcm47189-luxul-xap-1440.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;
@@ -17,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47189-luxul-xap-810.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
  */
 
 /dts-v1/;
@@ -17,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm47189-tenda-ac9.dts

@@ -16,6 +16,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 

sys/gnu/dts/arm/bcm5301x.dtsi

@@ -13,9 +13,10 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
 	chipcommonA {

sys/gnu/dts/arm/bcm53340-ubnt-unifi-switch8.dts

@@ -20,6 +20,7 @@
 	};
 
 	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x68000000 0x08000000>;
 	};

sys/gnu/dts/arm/bcm53573.dtsi

@@ -7,9 +7,10 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
 	aliases {

sys/gnu/dts/arm/bcm63138.dtsi

@@ -6,9 +6,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,bcm63138";
 	model = "Broadcom BCM63138 DSL SoC";
 	interrupt-parent = <&gic>;

sys/gnu/dts/arm/bcm7445.dtsi

@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;

sys/gnu/dts/arm/bcm947189acdbmr.dts

@@ -18,6 +18,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};