Remove useless trailing digit from pci and other unwired devices.

This commit is contained in:
peter 2000-01-23 12:20:09 +00:00
parent e4603c69b9
commit 7028fa1315
2 changed files with 102 additions and 108 deletions

View File

@ -67,8 +67,8 @@ options _KPOSIX_VERSION=199309L
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa0
device pci0
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 11 drq 2
@ -85,19 +85,17 @@ device wd0 at wdc0 drive 0
#device wd3 at wdc0 drive 3
# ATAPI devices on wdc?
device wcd0 #IDE CD-ROM
#device wfd0 #IDE Floppy (e.g. LS-120)
#device wst0 #IDE Tape (e.g. Travan)
device wcd #IDE CD-ROM
#device wfd #IDE Floppy (e.g. LS-120)
#device wst #IDE Tape (e.g. Travan)
# SCSI Controllers
# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
# sufficient for any number of installed devices.
device adv0
device ahc0 # AHA2940 and onboard AIC7xxx devices
device amd0 # AMD 53C974 (Teckram DC-390(T))
device isp0 # Qlogic family
device ncr0 # NCR/Symbios Logic
device sym0 # NCR/Symbios Logic (newer chipsets)
device adv
device ahc # AHA2940 and onboard AIC7xxx devices
device amd # AMD 53C974 (Teckram DC-390(T))
device isp # Qlogic family
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
#
# WD33C93 SCSI card (55/92 like board)
@ -119,16 +117,15 @@ device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000
# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
device scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device sa0 # Sequential Access (tape etc)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI access)
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers
device amr0 # AMI MegaRAID
device mlx0 # Mylex DAC960 family
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
# keyboard driver
device pckbd0 at isa? port IO_KBD irq 1
@ -149,7 +146,7 @@ device npx0 at nexus? port IO_NPX irq 8
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card0
device card
device pcic0 at isa? irq 6 port 0x3e0
# Serial (COM) ports
@ -185,7 +182,7 @@ device mse0 at isa? port IO_MSE irq 13
# NEW Parallel port
device ppc0 at isa? port? irq 14
device ppbus0 # Parallel port bus (required)
device ppbus # Parallel port bus (required)
device lpt0 at ppbus? # Printer
device plip0 at ppbus? # TCP/IP over parallel
device ppi0 at ppbus? # Parallel port interface device
@ -196,23 +193,23 @@ device olpt0 at isa? port IO_LPT
# PCI Ethernet NICs.
device de0 # DEC/Intel DC21x4x (``Tulip'')
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
device tx0 # SMC 9432TX (83c170 ``EPIC'')
device vx0 # 3Com 3c590, 3c595 (``Vortex'')
device wx0 # Intel Gigabit Ethernet Card (``Wiseman'')
device de # DEC/Intel DC21x4x (``Tulip'')
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device tx # SMC 9432TX (83c170 ``EPIC'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus0 # MII bus support
device dc0 # DEC/Intel 21143 and various workalikes
device rl0 # RealTek 8129/8139
device sf0 # Adaptec AIC-6915 (``Starfire'')
device sis0 # Silicon Integrated Systems SiS 900/SiS 7016
device ste0 # Sundance ST201 (D-Link DFE-550TX)
device tl0 # Texas Instruments ThunderLAN
device vr0 # VIA Rhine, Rhine II
device wb0 # Winbond W89C840F
device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#
@ -262,20 +259,20 @@ device lnc0 at isa? port 0x03d0 irq 6
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi0
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
# device an0
# device an
# requires PCCARD (PCMCIA) support to be activated
device sn0
device sn
#device xe0 at isa? port? irq ?
#device snd0
#device snd
#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3
#device sbxvi0 at isa? drq 3
#device sbmidi0 at isa? port 0x80d2
@ -300,16 +297,16 @@ pseudo-device bpf #Berkeley packet filter
#pseudo-device compat_atdisk #IBM-PC HDD support
# USB support
#device uhci0 # UHCI PCI->USB interface
#device ohci0 # OHCI PCI->USB interface
#device usb0 # USB Bus (required)
#device ugen0 # Generic
#device uhid0 # "Human Interface Devices"
#device ukbd0 # Keyboard
#device ulpt0 # Printer
#device umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da0
#device ums # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet

View File

@ -67,8 +67,8 @@ options _KPOSIX_VERSION=199309L
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa0
device pci0
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 11 drq 2
@ -85,19 +85,17 @@ device wd0 at wdc0 drive 0
#device wd3 at wdc0 drive 3
# ATAPI devices on wdc?
device wcd0 #IDE CD-ROM
#device wfd0 #IDE Floppy (e.g. LS-120)
#device wst0 #IDE Tape (e.g. Travan)
device wcd #IDE CD-ROM
#device wfd #IDE Floppy (e.g. LS-120)
#device wst #IDE Tape (e.g. Travan)
# SCSI Controllers
# A single entry for any of these controllers (ahb, ahc, amd, ncr, etc...) is
# sufficient for any number of installed devices.
device adv0
device ahc0 # AHA2940 and onboard AIC7xxx devices
device amd0 # AMD 53C974 (Teckram DC-390(T))
device isp0 # Qlogic family
device ncr0 # NCR/Symbios Logic
device sym0 # NCR/Symbios Logic (newer chipsets)
device adv
device ahc # AHA2940 and onboard AIC7xxx devices
device amd # AMD 53C974 (Teckram DC-390(T))
device isp # Qlogic family
device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets)
#
# WD33C93 SCSI card (55/92 like board)
@ -119,16 +117,15 @@ device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0
#device bs0 at isa? port IO_SCSI irq 5 drq 3 flags 0x50000
# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
device scbus0 # SCSI bus (required)
device da0 # Direct Access (disks)
device sa0 # Sequential Access (tape etc)
device cd0 # CD
device pass0 # Passthrough device (direct SCSI access)
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# RAID controllers
device amr0 # AMI MegaRAID
device mlx0 # Mylex DAC960 family
device amr # AMI MegaRAID
device mlx # Mylex DAC960 family
# keyboard driver
device pckbd0 at isa? port IO_KBD irq 1
@ -149,7 +146,7 @@ device npx0 at nexus? port IO_NPX irq 8
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card0
device card
device pcic0 at isa? irq 6 port 0x3e0
# Serial (COM) ports
@ -185,7 +182,7 @@ device mse0 at isa? port IO_MSE irq 13
# NEW Parallel port
device ppc0 at isa? port? irq 14
device ppbus0 # Parallel port bus (required)
device ppbus # Parallel port bus (required)
device lpt0 at ppbus? # Printer
device plip0 at ppbus? # TCP/IP over parallel
device ppi0 at ppbus? # Parallel port interface device
@ -196,23 +193,23 @@ device olpt0 at isa? port IO_LPT
# PCI Ethernet NICs.
device de0 # DEC/Intel DC21x4x (``Tulip'')
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
device tx0 # SMC 9432TX (83c170 ``EPIC'')
device vx0 # 3Com 3c590, 3c595 (``Vortex'')
device wx0 # Intel Gigabit Ethernet Card (``Wiseman'')
device de # DEC/Intel DC21x4x (``Tulip'')
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device tx # SMC 9432TX (83c170 ``EPIC'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus0 # MII bus support
device dc0 # DEC/Intel 21143 and various workalikes
device rl0 # RealTek 8129/8139
device sf0 # Adaptec AIC-6915 (``Starfire'')
device sis0 # Silicon Integrated Systems SiS 900/SiS 7016
device ste0 # Sundance ST201 (D-Link DFE-550TX)
device tl0 # Texas Instruments ThunderLAN
device vr0 # VIA Rhine, Rhine II
device wb0 # Winbond W89C840F
device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#
@ -262,20 +259,20 @@ device lnc0 at isa? port 0x03d0 irq 6
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi0
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
# device an0
# device an
# requires PCCARD (PCMCIA) support to be activated
device sn0
device sn
#device xe0 at isa? port? irq ?
#device snd0
#device snd
#device sb0 at isa? port 0x20d2 irq 10 conflicts drq 3
#device sbxvi0 at isa? drq 3
#device sbmidi0 at isa? port 0x80d2
@ -300,16 +297,16 @@ pseudo-device bpf #Berkeley packet filter
#pseudo-device compat_atdisk #IBM-PC HDD support
# USB support
#device uhci0 # UHCI PCI->USB interface
#device ohci0 # OHCI PCI->USB interface
#device usb0 # USB Bus (required)
#device ugen0 # Generic
#device uhid0 # "Human Interface Devices"
#device ukbd0 # Keyboard
#device ulpt0 # Printer
#device umass0 # Disks/Mass storage - Requires scbus and da0
#device ums0 # Mouse
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da0
#device ums # Mouse
# USB Ethernet
#device aue0 # ADMtek USB ethernet
#device cue0 # CATC USB ethernet
#device kue0 # Kawasaki LSI USB ethernet
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet