From 7330b43259be59deaa068cc1f0549a37ed473931 Mon Sep 17 00:00:00 2001 From: manu Date: Wed, 8 May 2019 19:00:46 +0000 Subject: [PATCH] Import Linux 5.1 DTS files --- Bindings/Makefile | 2 +- Bindings/arm/amlogic.txt | 1 + Bindings/arm/armadeus.txt | 6 - Bindings/arm/atmel-sysregs.txt | 4 +- Bindings/arm/bcm/brcm,bcm2835.txt | 4 + Bindings/arm/bhf.txt | 6 - Bindings/arm/bitmain.yaml | 18 + Bindings/arm/compulab-boards.txt | 25 - Bindings/arm/cpus.yaml | 1 + Bindings/arm/freescale/fsl,imx7ulp-sim.txt | 16 + Bindings/arm/freescale/fsl,scu.txt | 15 +- Bindings/arm/fsl.txt | 237 -- Bindings/arm/fsl.yaml | 232 ++ Bindings/arm/i2se.txt | 22 - Bindings/arm/l2c2x0.txt | 114 - Bindings/arm/l2c2x0.yaml | 248 +++ Bindings/arm/mediatek.txt | 14 +- Bindings/arm/olimex.txt | 10 - Bindings/arm/pmu.txt | 70 - Bindings/arm/pmu.yaml | 87 + Bindings/arm/renesas.yaml | 238 ++ Bindings/arm/rockchip.yaml | 17 + Bindings/arm/shmobile.txt | 155 -- Bindings/arm/socionext/milbeaut.yaml | 22 + Bindings/arm/technologic.txt | 23 - Bindings/arm/tegra.yaml | 2 + Bindings/bus/imx-weim.txt | 32 +- Bindings/clock/actions,owl-cmu.txt | 7 +- Bindings/clock/amlogic,gxbb-aoclkc.txt | 1 + Bindings/clock/amlogic,gxbb-clkc.txt | 1 + Bindings/clock/exynos5433-clock.txt | 23 + Bindings/clock/fixed-clock.txt | 23 - Bindings/clock/fixed-clock.yaml | 44 + Bindings/clock/fixed-factor-clock.txt | 28 - Bindings/clock/fixed-factor-clock.yaml | 56 + Bindings/clock/fixed-mmio-clock.txt | 24 + Bindings/clock/imx8mm-clock.txt | 29 + Bindings/clock/nvidia,tegra124-dfll.txt | 83 +- Bindings/clock/qcom,rpmcc.txt | 1 + Bindings/cpufreq/nvidia,tegra124-cpufreq.txt | 6 +- Bindings/crypto/samsung-slimsss.txt | 19 + .../display/amlogic,simple-framebuffer.txt | 33 + Bindings/display/arm,komeda.txt | 73 + Bindings/display/bridge/cdns,dsi.txt | 21 - Bindings/display/bridge/lvds-transmitter.txt | 12 +- Bindings/display/bridge/renesas,lvds.txt | 4 +- .../display/bridge/thine,thc63lvdm83d.txt | 2 +- Bindings/display/bridge/ti,ds90c185.txt | 55 + Bindings/display/msm/gmu.txt | 59 + Bindings/display/msm/gpu.txt | 42 +- .../{auo,g101evn010 => auo,g101evn010.txt} | 0 .../display/panel/innolux,ee101ia-01d.txt | 7 + .../display/panel/lemaker,bl035-rgb-002.txt | 12 + Bindings/display/panel/pda,91-00156-a0.txt | 14 + Bindings/display/panel/sitronix,st7701.txt | 30 + Bindings/display/renesas,du.txt | 2 + Bindings/display/rockchip/rockchip-vop.txt | 1 + Bindings/display/sitronix,st7735r.txt | 2 +- Bindings/display/ssd1307fb.txt | 2 - Bindings/display/sunxi/sun4i-drm.txt | 5 + .../display/tegra/nvidia,tegra20-host1x.txt | 3 + Bindings/dma/dma.txt | 4 + Bindings/dma/fsl-qdma.txt | 57 + Bindings/dma/k3dma.txt | 4 +- Bindings/dma/snps-dma.txt | 2 - Bindings/dma/sprd-dma.txt | 2 +- Bindings/dma/xilinx/xilinx_dma.txt | 7 +- Bindings/edac/aspeed-sdram-edac.txt | 25 + Bindings/eeprom/at24.txt | 3 + Bindings/extcon/extcon-ptn5150.txt | 27 + Bindings/firmware/nvidia,tegra186-bpmp.txt | 1 - Bindings/firmware/nvidia,tegra210-bpmp.txt | 35 + Bindings/gnss/gnss.txt | 1 + Bindings/gnss/mediatek.txt | 35 + Bindings/gnss/sirfstar.txt | 1 + Bindings/gpio/gateworks,pld-gpio.txt | 20 + Bindings/gpio/gpio-eic-sprd.txt | 4 +- Bindings/gpio/gpio-pca953x.txt | 1 + Bindings/gpio/gpio.txt | 12 + Bindings/gpio/intel,ixp4xx-gpio.txt | 38 + Bindings/gpu/arm,mali-utgard.txt | 6 + Bindings/gpu/samsung-rotator.txt | 7 +- Bindings/hwmon/ad741x.txt | 15 + Bindings/hwmon/adc128d818.txt | 4 +- Bindings/hwmon/dps650ab.txt | 11 + Bindings/hwmon/hih6130.txt | 12 + Bindings/hwmon/ina3221.txt | 10 + Bindings/hwmon/lm75.txt | 37 + Bindings/hwmon/pwm-fan.txt | 3 + Bindings/i2c/i2c-iop3xx.txt | 20 + Bindings/i2c/{i2c-mtk.txt => i2c-mt65xx.txt} | 1 + .../i2c/{i2c-st-ddci2c.txt => i2c-stu300.txt} | 0 ...{i2c-sunxi-p2wi.txt => i2c-sun6i-p2wi.txt} | 0 Bindings/i2c/{i2c-vt8500.txt => i2c-wmt.txt} | 0 Bindings/iio/accel/mma8452.txt | 4 + Bindings/iio/adc/adi,ad7606.txt | 65 + Bindings/iio/adc/adi,ad7768-1.txt | 41 + Bindings/iio/adc/amlogic,meson-saradc.txt | 4 + Bindings/iio/adc/ingenic,adc.txt | 48 + .../{staging => }/iio/adc/lpc32xx-adc.txt | 0 Bindings/iio/adc/nuvoton,npcm-adc.txt | 24 + Bindings/iio/adc/samsung,exynos-adc.txt | 4 +- Bindings/iio/adc/stmpe-adc.txt | 21 + Bindings/iio/adc/ti-ads124s08.txt | 25 + Bindings/iio/chemical/bme680.txt | 11 + Bindings/iio/chemical/plantower,pms7003.txt | 20 + Bindings/iio/chemical/sensirion,sgp30.txt | 15 + Bindings/iio/chemical/sensirion,sps30.txt | 12 + Bindings/iio/dac/ti,dac7612.txt | 28 + Bindings/iio/impedance-analyzer/ad5933.txt | 26 + Bindings/iio/imu/bmi160.txt | 6 +- Bindings/iio/imu/inv_mpu6050.txt | 1 + Bindings/iio/light/max44009.txt | 24 + Bindings/iio/st-sensors.txt | 1 + Bindings/input/cypress,tm2-touchkey.txt | 9 +- Bindings/input/ilitek,ili2xxx.txt | 25 + Bindings/input/msm-vibrator.txt | 36 + Bindings/input/st,stpmic1-onkey.txt | 28 + Bindings/input/touchscreen/edt-ft5x06.txt | 13 +- Bindings/input/touchscreen/goodix.txt | 12 +- .../input/touchscreen/sitronix-st1232.txt | 8 +- Bindings/input/touchscreen/stmpe.txt | 116 +- Bindings/input/touchscreen/sx8654.txt | 10 +- Bindings/input/touchscreen/ti-tsc-adc.txt | 8 + Bindings/interconnect/interconnect.txt | 60 + Bindings/interconnect/qcom,sdm845.txt | 24 + Bindings/interrupt-controller/arm,gic-v3.txt | 175 -- Bindings/interrupt-controller/arm,gic-v3.yaml | 279 +++ Bindings/interrupt-controller/arm,gic.txt | 171 -- Bindings/interrupt-controller/arm,gic.yaml | 223 ++ .../interrupt-controller/fsl,irqsteer.txt | 11 +- .../loongson,ls1x-intc.txt | 24 + .../interrupt-controller/mediatek,sysirq.txt | 1 + .../interrupt-controller/renesas,irqc.txt | 1 + Bindings/iommu/nvidia,tegra20-gart.txt | 14 - Bindings/leds/common.txt | 12 + Bindings/leds/leds-trigger-pattern.txt | 49 + Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt | 127 ++ Bindings/media/i2c/adv748x.txt | 11 +- Bindings/media/i2c/melexis,mlx90640.txt | 20 + Bindings/media/i2c/mt9m001.txt | 38 + Bindings/media/i2c/ov5645.txt | 6 +- Bindings/media/imx7-csi.txt | 45 + Bindings/media/imx7-mipi-csi2.txt | 90 + Bindings/media/mediatek-vcodec.txt | 13 + Bindings/media/rcar_vin.txt | 9 +- Bindings/media/renesas,fcp.txt | 5 +- Bindings/media/renesas,rcar-csi2.txt | 3 +- Bindings/media/renesas,vsp1.txt | 6 +- Bindings/media/si470x.txt | 26 + Bindings/media/sun6i-csi.txt | 3 +- .../memory-controllers/nvidia,tegra20-mc.txt | 27 +- Bindings/mfd/aspeed-lpc.txt | 2 + Bindings/mfd/cirrus,lochnagar.txt | 68 + Bindings/mfd/rohm,bd71837-pmic.txt | 17 + Bindings/mfd/st,stpmic1.txt | 61 + Bindings/mfd/stmpe.txt | 28 +- Bindings/mips/lantiq/rcu-gphy.txt | 36 - Bindings/mips/lantiq/rcu.txt | 18 - Bindings/misc/qcom,fastrpc.txt | 78 + Bindings/mmc/fsl-imx-esdhc.txt | 1 + Bindings/mmc/mmc.txt | 2 + Bindings/mmc/nvidia,tegra20-sdhci.txt | 6 +- Bindings/mmc/ti-omap.txt | 28 - Bindings/mtd/amlogic,meson-nand.txt | 60 + Bindings/mtd/cadence-quadspi.txt | 1 + Bindings/mtd/mtk-quadspi.txt | 3 +- Bindings/mtd/stm32-fmc2-nand.txt | 61 + Bindings/net/btusb.txt | 3 + Bindings/net/cpsw-phy-sel.txt | 2 +- Bindings/net/davinci_emac.txt | 2 + Bindings/net/dsa/dsa.txt | 5 + Bindings/net/dsa/ksz.txt | 145 +- Bindings/net/dsa/mt7530.txt | 6 +- Bindings/net/dsa/qca8k.txt | 73 +- Bindings/net/ethernet.txt | 5 +- Bindings/net/fsl-enetc.txt | 69 + Bindings/net/macb.txt | 8 +- Bindings/net/marvell-armada-370-neta.txt | 2 +- Bindings/net/mdio-mux-multiplexer.txt | 82 + Bindings/net/mediatek-bluetooth.txt | 64 + Bindings/net/nixge.txt | 76 +- Bindings/net/qcom,ethqos.txt | 64 + Bindings/net/stm32-dwmac.txt | 9 +- Bindings/net/wireless/mediatek,mt76.txt | 19 + Bindings/nvmem/imx-ocotp.txt | 4 +- Bindings/nvmem/xlnx,zynqmp-nvmem.txt | 46 + Bindings/opp/opp.txt | 3 + Bindings/pci/altera-pcie.txt | 4 +- Bindings/pci/fsl,imx6q-pcie.txt | 18 +- Bindings/pci/layerscape-pci.txt | 3 + Bindings/pci/rcar-pci.txt | 4 +- Bindings/pci/ti-pci.txt | 11 +- Bindings/phy/cdns,dphy.txt | 20 + Bindings/phy/phy-armada38x-comphy.txt | 40 + Bindings/phy/phy-mvebu-comphy.txt | 65 +- Bindings/phy/phy-mvebu-utmi.txt | 38 + Bindings/phy/phy-rockchip-inno-usb2.txt | 2 + Bindings/phy/qcom-qmp-phy.txt | 9 + Bindings/phy/qcom-qusb2-phy.txt | 1 + Bindings/phy/rcar-gen3-phy-usb2.txt | 2 + Bindings/phy/ti-phy.txt | 1 + Bindings/pinctrl/atmel,at91-pinctrl.txt | 27 +- Bindings/pinctrl/fsl,imx50-pinctrl.txt | 32 + Bindings/pinctrl/fsl,imx8mm-pinctrl.txt | 36 + .../pinctrl/marvell,armada-37xx-pinctrl.txt | 24 +- Bindings/pinctrl/meson,pinctrl.txt | 10 +- Bindings/pinctrl/qcom,pmic-gpio.txt | 1 + Bindings/power/fsl,imx-gpcv2.txt | 3 + Bindings/power/qcom,rpmpd.txt | 145 ++ Bindings/power/reset/xlnx,zynqmp-power.txt | 25 + Bindings/power/supply/battery.txt | 2 + Bindings/power/supply/sc27xx-fg.txt | 8 +- Bindings/power/xlnx,zynqmp-genpd.txt | 34 + Bindings/property-units.txt | 1 + Bindings/ptp/ptp-qoriq.txt | 5 + Bindings/pwm/atmel-pwm.txt | 1 + Bindings/pwm/pwm-hibvt.txt | 2 + Bindings/regulator/fan53555.txt | 3 +- Bindings/regulator/fixed-regulator.txt | 35 - Bindings/regulator/fixed-regulator.yaml | 67 + Bindings/regulator/max77650-regulator.txt | 41 + Bindings/regulator/pfuze100.txt | 2 +- Bindings/regulator/rohm,bd70528-regulator.txt | 68 + Bindings/regulator/rohm,bd71837-regulator.txt | 38 + Bindings/regulator/st,stpmic1-regulator.txt | 6 +- Bindings/regulator/tps65218.txt | 9 +- Bindings/remoteproc/qcom,adsp-pil.txt | 5 +- Bindings/remoteproc/qcom,adsp.txt | 23 +- Bindings/remoteproc/qcom,q6v5.txt | 79 +- Bindings/reset/brcm,brcmstb-reset.txt | 27 + Bindings/reset/fsl,imx7-src.txt | 7 +- Bindings/reset/xlnx,zynqmp-reset.txt | 52 + Bindings/rtc/abracon,abx80x.txt | 1 + Bindings/rtc/cdns,rtc.txt | 25 + Bindings/rtc/isil,isl1208.txt | 38 + Bindings/rtc/isil,isl1219.txt | 29 - Bindings/rtc/nxp,pcf85063.txt | 18 + Bindings/rtc/nxp,pcf8523.txt | 18 + Bindings/rtc/rtc-meson.txt | 35 + Bindings/rtc/rtc.txt | 23 +- Bindings/serial/8250.txt | 1 + Bindings/serial/ingenic,uart.txt | 3 +- Bindings/serial/milbeaut-uart.txt | 21 + Bindings/serial/mtk-uart.txt | 1 + Bindings/serial/nvidia,tegra194-tcu.txt | 35 + Bindings/serial/omap_serial.txt | 2 + Bindings/serial/pl011.txt | 51 - Bindings/serial/pl011.yaml | 126 ++ Bindings/serial/renesas,rzn1-uart.txt | 10 - Bindings/serial/renesas,sci-serial.txt | 2 + Bindings/serial/snps-dw-apb-uart.txt | 76 - Bindings/serial/snps-dw-apb-uart.yaml | 140 ++ Bindings/soc/amlogic/clk-measure.txt | 2 + Bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 + Bindings/soc/qcom/qcom,smd-rpm.txt | 1 + Bindings/sound/adi,adau1977.txt | 13 +- Bindings/sound/ak4458.txt | 2 +- Bindings/sound/audio-graph-scu-card.txt | 123 -- Bindings/sound/cs35l36.txt | 168 ++ Bindings/sound/cs4341.txt | 22 + Bindings/sound/davinci-mcasp-audio.txt | 17 + Bindings/sound/fsl,micfil.txt | 32 + Bindings/sound/google,cros-ec-codec.txt | 26 + Bindings/sound/ingenic,jz4725b-codec.txt | 20 + Bindings/sound/ingenic,jz4740-codec.txt | 20 + Bindings/sound/mt6358.txt | 18 + Bindings/sound/mt8183-afe-pcm.txt | 36 + Bindings/sound/mtk-btcvsd-snd.txt | 24 + Bindings/sound/nvidia,tegra30-hda.txt | 5 + Bindings/sound/qcom,msm8916-wcd-analog.txt | 7 +- Bindings/sound/qcom,wcd9335.txt | 10 +- Bindings/sound/rockchip,rk3328-codec.txt | 23 + Bindings/sound/sgtl5000.txt | 9 + Bindings/sound/simple-scu-card.txt | 94 - Bindings/sound/sprd-pcm.txt | 23 + Bindings/sound/xlnx,audio-formatter.txt | 29 + Bindings/sound/xlnx,spdif.txt | 28 + Bindings/spi/atmel-quadspi.txt | 12 +- Bindings/spi/fsl-imx-cspi.txt | 1 + .../fsl-quadspi.txt => spi/spi-fsl-qspi.txt} | 18 +- Bindings/spi/spi-nxp-fspi.txt | 39 + Bindings/spi/spi-sifive.txt | 37 + Bindings/spi/spi-sprd.txt | 7 + Bindings/spi/spi-stm32.txt | 9 +- Bindings/sram/milbeaut-smp-sram.txt | 24 + Bindings/sram/sunxi-sram.txt | 1 + Bindings/thermal/brcm,sr-thermal.txt | 105 + Bindings/thermal/mediatek-thermal.txt | 1 + Bindings/timer/fsl,imxgpt.txt | 39 +- Bindings/timer/mediatek,mtk-timer.txt | 11 +- Bindings/timer/nvidia,tegra210-timer.txt | 36 + Bindings/timer/renesas,cmt.txt | 2 + Bindings/timer/renesas,tmu.txt | 1 + Bindings/timer/socionext,milbeaut-timer.txt | 17 + Bindings/trivial-devices.yaml | 2 + Bindings/ufs/ufs-hisi.txt | 5 +- Bindings/ufs/ufshcd-pltfrm.txt | 13 +- Bindings/usb/ci-hdrc-usb2.txt | 1 + Bindings/usb/ingenic,jz4740-musb.txt | 24 + Bindings/usb/keystone-usb.txt | 6 +- Bindings/usb/qcom,dwc3.txt | 1 + Bindings/usb/renesas_usb3.txt | 1 + Bindings/usb/renesas_usbhs.txt | 1 + Bindings/usb/usb251xb.txt | 4 + Bindings/vendor-prefixes.txt | 13 + Bindings/watchdog/renesas-wdt.txt | 1 + Bindings/watchdog/st,stpmic1-wdt.txt | 11 + include/dt-bindings/clk/lochnagar.h | 26 + include/dt-bindings/clock/actions,s500-cmu.h | 78 + include/dt-bindings/clock/ath79-clk.h | 4 +- include/dt-bindings/clock/axg-aoclkc.h | 7 +- include/dt-bindings/clock/exynos5433.h | 8 +- include/dt-bindings/clock/g12a-aoclkc.h | 34 + include/dt-bindings/clock/g12a-clkc.h | 135 ++ include/dt-bindings/clock/gxbb-aoclkc.h | 7 + include/dt-bindings/clock/imx5-clock.h | 3 +- include/dt-bindings/clock/imx8mm-clock.h | 244 +++ include/dt-bindings/clock/imx8mq-clock.h | 211 +- include/dt-bindings/clock/marvell,mmp2.h | 1 + include/dt-bindings/clock/meson8b-clkc.h | 1 + include/dt-bindings/clock/mt2712-clk.h | 3 +- include/dt-bindings/clock/mt8173-clk.h | 3 +- include/dt-bindings/clock/qcom,rpmcc.h | 10 + include/dt-bindings/clock/qcom,rpmh.h | 1 + include/dt-bindings/clock/r8a774a1-cpg-mssr.h | 1 + include/dt-bindings/clock/r8a774c0-cpg-mssr.h | 1 + include/dt-bindings/clock/r8a7778-clock.h | 2 + include/dt-bindings/clock/sifive-fu540-prci.h | 18 + include/dt-bindings/clock/stm32mp1-clks.h | 3 - include/dt-bindings/gpio/gpio.h | 6 + include/dt-bindings/iio/adc/ingenic,adc.h | 10 + include/dt-bindings/input/linux-event-codes.h | 6 +- .../dt-bindings/interconnect/qcom,sdm845.h | 143 ++ include/dt-bindings/mfd/st,stpmic1.h | 50 + include/dt-bindings/pinctrl/at91.h | 4 + include/dt-bindings/pinctrl/lochnagar.h | 132 ++ include/dt-bindings/power/mt8173-power.h | 6 +- include/dt-bindings/power/qcom-rpmpd.h | 39 + include/dt-bindings/power/xlnx-zynqmp-power.h | 39 + .../reset/amlogic,meson-g12a-reset.h | 137 ++ include/dt-bindings/reset/g12a-aoclkc.h | 18 + include/dt-bindings/reset/imx8mq-reset.h | 64 + .../dt-bindings/reset/xlnx-zynqmp-resets.h | 130 ++ include/dt-bindings/soc/bcm2835-pm.h | 28 + src/arc/abilis_tb100.dtsi | 58 +- src/arc/abilis_tb100_dvk.dts | 14 +- src/arc/abilis_tb101.dtsi | 58 +- src/arc/abilis_tb101_dvk.dts | 14 +- src/arc/abilis_tb10x.dtsi | 60 +- src/arc/axc001.dtsi | 6 +- src/arc/axc003.dtsi | 16 +- src/arc/axc003_idu.dtsi | 16 +- src/arc/axs10x_mb.dtsi | 22 +- src/arc/hsdk.dts | 46 +- src/arc/vdk_axc003.dtsi | 4 +- src/arc/vdk_axc003_idu.dtsi | 4 +- src/arc/vdk_axs10x_mb.dtsi | 18 +- src/arm/alphascale-asm9260.dtsi | 3 +- src/arm/alpine.dtsi | 8 +- src/arm/am335x-baltos-ir2110.dts | 4 - src/arm/am335x-baltos-ir3220.dts | 4 - src/arm/am335x-baltos-ir5221.dts | 4 - src/arm/am335x-chiliboard.dts | 8 +- src/arm/am335x-evm.dts | 26 +- src/arm/am335x-evmsk.dts | 26 +- src/arm/am335x-guardian.dts | 511 +++++ src/arm/am335x-icev2.dts | 4 - src/arm/am335x-igep0033.dtsi | 4 - src/arm/am335x-lxm.dts | 4 - src/arm/am335x-moxa-uc-2100-common.dtsi | 5 - src/arm/am335x-moxa-uc-8100-me-t.dts | 5 - src/arm/am335x-phycore-som.dtsi | 4 - src/arm/am335x-shc.dts | 4 +- src/arm/am33xx-l4.dtsi | 21 +- src/arm/am3874-iceboard.dts | 496 +++++ src/arm/am437x-gp-evm.dts | 2 +- src/arm/am437x-l4.dtsi | 17 +- src/arm/am43x-epos-evm.dts | 5 +- src/arm/arm-realview-eb.dtsi | 4 +- src/arm/arm-realview-pb1176.dts | 4 +- src/arm/arm-realview-pb11mp.dts | 4 +- src/arm/arm-realview-pbx.dtsi | 4 +- src/arm/armada-370-rd.dts | 42 - src/arm/armada-388-clearfog.dts | 58 - src/arm/armada-388-clearfog.dtsi | 2 + src/arm/armada-38x.dtsi | 41 +- src/arm/armada-39x.dtsi | 3 +- src/arm/armada-xp-linksys-mamba.dts | 47 - src/arm/artpec6.dtsi | 3 +- .../aspeed-bmc-arm-stardragon4800-rep2.dts | 10 + src/arm/aspeed-bmc-facebook-tiogapass.dts | 55 +- src/arm/aspeed-bmc-inspur-on5263m5.dts | 145 ++ src/arm/aspeed-bmc-opp-palmetto.dts | 5 + src/arm/aspeed-bmc-quanta-q71l.dts | 8 + src/arm/aspeed-g4.dtsi | 1 + src/arm/aspeed-g5.dtsi | 41 +- src/arm/at91-nattis-2-natte-2.dts | 2 +- src/arm/at91-sama5d27_som1.dtsi | 30 + src/arm/at91-sama5d27_som1_ek.dts | 4 + src/arm/at91-wb45n.dts | 2 +- src/arm/at91-wb50n.dts | 4 +- src/arm/at91rm9200.dtsi | 4 +- src/arm/at91sam9260.dtsi | 4 +- src/arm/at91sam9261.dtsi | 4 +- src/arm/at91sam9263.dtsi | 4 +- src/arm/at91sam9g45.dtsi | 4 +- src/arm/at91sam9n12.dtsi | 4 +- src/arm/at91sam9rl.dtsi | 4 +- src/arm/at91sam9x5.dtsi | 4 +- src/arm/atlas6-evb.dts | 1 + src/arm/atlas6.dtsi | 1 - src/arm/atlas7.dtsi | 1 - src/arm/axm55xx.dtsi | 4 +- src/arm/bcm-cygnus.dtsi | 9 +- src/arm/bcm-nsp.dtsi | 4 +- src/arm/bcm11351.dtsi | 4 +- src/arm/bcm21664-garnet.dts | 1 + src/arm/bcm21664.dtsi | 4 +- src/arm/bcm23550-sparrow.dts | 1 + src/arm/bcm23550.dtsi | 4 +- src/arm/bcm28155-ap.dts | 1 + src/arm/bcm2835-rpi-a-plus.dts | 4 +- src/arm/bcm2835-rpi-b-plus.dts | 4 +- src/arm/bcm2835-rpi-b-rev2.dts | 2 +- src/arm/bcm2835-rpi-zero-w.dts | 11 +- src/arm/bcm2835-rpi-zero.dts | 4 +- src/arm/bcm2835-rpi.dtsi | 8 +- src/arm/bcm2836-rpi-2-b.dts | 68 +- src/arm/bcm2837-rpi-3-a-plus.dts | 175 ++ src/arm/bcm2837-rpi-3-b-plus.dts | 74 +- src/arm/bcm2837-rpi-3-b.dts | 74 +- src/arm/bcm2837-rpi-cm3.dtsi | 2 +- src/arm/bcm283x.dtsi | 17 +- src/arm/bcm47081-asus-rt-n18u.dts | 1 + src/arm/bcm47081-buffalo-wzr-600dhp2.dts | 1 + src/arm/bcm47081-buffalo-wzr-900dhp.dts | 1 + src/arm/bcm47081-luxul-xap-1410.dts | 1 + src/arm/bcm47081-luxul-xwr-1200.dts | 1 + src/arm/bcm47081-tplink-archer-c5-v2.dts | 1 + src/arm/bcm47094-dlink-dir-885l.dts | 1 + src/arm/bcm47094-linksys-panamera.dts | 1 + src/arm/bcm47094-luxul-abr-4500.dts | 1 + src/arm/bcm47094-luxul-xap-1610.dts | 1 + src/arm/bcm47094-luxul-xbr-4500.dts | 1 + src/arm/bcm47094-luxul-xwr-3100.dts | 1 + src/arm/bcm47094-luxul-xwr-3150-v1.dts | 1 + src/arm/bcm47094-netgear-r8500.dts | 1 + src/arm/bcm47094-phicomm-k3.dts | 71 + src/arm/bcm47189-luxul-xap-1440.dts | 4 +- src/arm/bcm47189-luxul-xap-810.dts | 4 +- src/arm/bcm47189-tenda-ac9.dts | 1 + src/arm/bcm5301x.dtsi | 3 +- src/arm/bcm53340-ubnt-unifi-switch8.dts | 1 + src/arm/bcm53573.dtsi | 3 +- src/arm/bcm63138.dtsi | 4 +- src/arm/bcm7445.dtsi | 2 - src/arm/bcm947189acdbmr.dts | 1 + src/arm/bcm953012er.dts | 1 + src/arm/bcm953012hr.dts | 1 + src/arm/bcm953012k.dts | 1 + src/arm/cx92755.dtsi | 4 +- src/arm/da850-lcdk.dts | 10 +- src/arm/dm814x.dtsi | 79 +- src/arm/dove.dtsi | 4 +- src/arm/dra7-l4.dtsi | 15 +- src/arm/ep7209.dtsi | 4 +- src/arm/ep7211-edb7211.dts | 1 + src/arm/exynos3250.dtsi | 3 + src/arm/exynos4412-odroid-common.dtsi | 14 +- src/arm/exynos4412-odroidx.dts | 2 +- src/arm/exynos5250-arndale.dts | 4 +- src/arm/exynos5422-odroid-core.dtsi | 7 +- src/arm/exynos5422-odroidxu3-audio.dtsi | 6 +- src/arm/exynos5422-odroidxu3-common.dtsi | 5 - src/arm/exynos5422-odroidxu3-lite.dts | 8 + src/arm/exynos5422-odroidxu4.dts | 4 +- src/arm/imx27.dtsi | 2 +- src/arm/imx28-cfa10036.dts | 3 +- src/arm/imx51-digi-connectcore-jsk.dts | 16 + src/arm/imx51-digi-connectcore-som.dtsi | 34 +- src/arm/imx6-logicpd-baseboard.dtsi | 555 +++++ src/arm/imx6-logicpd-som.dtsi | 365 ++++ src/arm/imx6dl-colibri-eval-v3.dts | 5 +- src/arm/imx6dl-yapp4-common.dtsi | 595 +++++ src/arm/imx6dl-yapp4-draco.dts | 58 + src/arm/imx6dl-yapp4-hydra.dts | 50 + src/arm/imx6dl-yapp4-ursa.dts | 54 + src/arm/imx6q-logicpd.dts | 120 ++ src/arm/imx6q-tbs2910.dts | 49 +- src/arm/imx6qdl-apalis.dtsi | 26 +- src/arm/imx6qdl-colibri.dtsi | 26 +- src/arm/imx6qdl-icore-rqs.dtsi | 4 +- src/arm/imx6qdl-phytec-pfla02.dtsi | 15 + src/arm/imx6qdl-sabresd.dtsi | 6 +- src/arm/imx6sl.dtsi | 8 +- src/arm/imx6sx.dtsi | 19 +- src/arm/imx6ul-phytec-pcl063.dtsi | 148 ++ src/arm/imx6ul-phytec-peb-eval-01.dtsi | 55 + src/arm/imx6ul-phytec-phyboard-segin-full.dts | 89 + src/arm/imx6ul-phytec-phyboard-segin.dtsi | 329 +++ src/arm/imx6ull-colibri.dtsi | 8 +- src/arm/imx6ull-pinfunc-snvs.h | 2 +- src/arm/imx6ull.dtsi | 12 + src/arm/imx7d.dtsi | 9 + src/arm/imx7ulp.dtsi | 19 +- src/arm/integrator.dtsi | 10 +- src/arm/integratorcp.dts | 89 +- src/arm/kirkwood-dir665.dts | 47 - src/arm/kirkwood-linksys-viper.dts | 47 - src/arm/kirkwood-mv88f6281gtw-ge.dts | 47 - src/arm/kirkwood-rd88f6281-z0.dts | 9 - src/arm/kirkwood-rd88f6281.dtsi | 41 - src/arm/kirkwood.dtsi | 3 +- src/arm/lpc3250-ea3250.dts | 20 +- src/arm/lpc3250-phy3250.dts | 87 +- src/arm/lpc32xx.dtsi | 32 +- src/arm/lpc4350-hitex-eval.dts | 2 - src/arm/lpc4357-ea4357-devkit.dts | 2 - src/arm/lpc4357-myd-lpc4357.dts | 619 ++++++ src/arm/ls1021a-moxa-uc-8410a.dts | 1 + src/arm/ls1021a-qds.dts | 1 + src/arm/ls1021a-twr.dts | 1 + src/arm/ls1021a.dtsi | 19 +- src/arm/meson.dtsi | 10 +- src/arm/meson6-atv1200.dts | 1 + src/arm/meson6.dtsi | 8 + src/arm/meson8-minix-neo-x8.dts | 1 + src/arm/meson8.dtsi | 89 +- src/arm/meson8b-ec100.dts | 128 ++ src/arm/meson8b-mxq.dts | 1 + src/arm/meson8b-odroidc1.dts | 6 + src/arm/meson8b.dtsi | 83 +- src/arm/meson8m2-mxiii-plus.dts | 6 + src/arm/meson8m2.dtsi | 4 + src/arm/milbeaut-m10v-evb.dts | 32 + src/arm/milbeaut-m10v.dtsi | 95 + src/arm/mmp2-brownstone.dts | 1 + src/arm/mmp2.dtsi | 4 +- src/arm/moxart.dtsi | 3 +- src/arm/mps2.dtsi | 6 +- src/arm/mt2701-evb.dts | 1 + src/arm/mt2701.dtsi | 3 +- src/arm/mt6580-evbp1.dts | 1 + src/arm/mt6580.dtsi | 1 - src/arm/mt6589-aquaris5.dts | 1 + src/arm/mt6589.dtsi | 3 +- src/arm/mt6592-evb.dts | 2 +- src/arm/mt6592.dtsi | 3 +- src/arm/mt7623.dtsi | 15 +- src/arm/mt8127-moose.dts | 1 + src/arm/mt8127.dtsi | 3 +- src/arm/mt8135-evbp1.dts | 1 + src/arm/mt8135.dtsi | 3 +- src/arm/nspire.dtsi | 4 +- src/arm/omap3-evm-common.dtsi | 7 +- src/arm/omap3-evm-processor-common.dtsi | 10 +- src/arm/omap3-gta04.dtsi | 39 +- src/arm/omap3-gta04a5.dts | 2 +- src/arm/omap4-droid4-xt894.dts | 10 +- src/arm/omap4-panda-common.dtsi | 6 +- src/arm/omap4-sdp.dts | 30 + src/arm/orion5x-lacie-d2-network.dts | 1 + .../orion5x-lacie-ethernet-disk-mini-v2.dts | 1 + src/arm/orion5x-lswsgl.dts | 1 + src/arm/orion5x-maxtor-shared-storage-2.dts | 1 + src/arm/orion5x-netgear-wnr854t.dts | 1 + src/arm/orion5x-rd88f5182-nas.dts | 1 + src/arm/orion5x.dtsi | 4 +- src/arm/ox810se.dtsi | 4 +- src/arm/ox820.dtsi | 4 +- src/arm/picoxcell-pc3x2.dtsi | 1 - src/arm/picoxcell-pc3x3.dtsi | 1 - src/arm/prima2-evb.dts | 1 + src/arm/prima2.dtsi | 1 - src/arm/pxa168.dtsi | 4 +- src/arm/pxa2xx.dtsi | 3 +- src/arm/pxa910.dtsi | 4 +- src/arm/qcom-apq8060-dragonboard.dts | 21 +- src/arm/qcom-apq8064.dtsi | 54 +- src/arm/qcom-apq8084.dtsi | 9 +- src/arm/qcom-ipq4019.dtsi | 11 +- src/arm/qcom-ipq8064.dtsi | 8 +- src/arm/qcom-mdm9615-wp8548.dtsi | 1 + src/arm/qcom-mdm9615.dtsi | 13 +- src/arm/qcom-msm8660.dtsi | 72 +- src/arm/qcom-msm8960.dtsi | 9 +- .../qcom-msm8974-lge-nexus5-hammerhead.dts | 130 ++ src/arm/qcom-msm8974.dtsi | 19 +- src/arm/qcom-pm8941.dtsi | 39 +- src/arm/qcom-pma8084.dtsi | 24 +- src/arm/r7s9210-rza2mevb.dts | 82 + src/arm/r7s9210.dtsi | 218 ++ src/arm/r8a7743.dtsi | 43 +- src/arm/r8a7744.dtsi | 188 +- src/arm/r8a77470-iwg23s-sbc.dts | 18 + src/arm/r8a7778.dtsi | 28 + src/arm/r8a7779.dtsi | 26 + src/arm/r8a7790-stout.dts | 15 +- src/arm/rk3036-kylin.dts | 1 - src/arm/rk3036.dtsi | 1 + src/arm/rk3066a-bqcurie2.dts | 1 - src/arm/rk3066a-mk808.dts | 1 - src/arm/rk3066a-rayeager.dts | 2 - src/arm/rk3066a.dtsi | 48 + src/arm/rk3188-bqedison2qc.dts | 19 +- src/arm/rk3188-px3-evb.dts | 1 - src/arm/rk3229-evb.dts | 1 - src/arm/rk3288-fennec.dts | 1 - src/arm/rk3288-firefly-reload.dts | 1 - src/arm/rk3288-miqi.dts | 1 - src/arm/rk3288-popmetal.dts | 1 - src/arm/rk3288-rock2-square.dts | 1 - src/arm/rk3288-tinker-s.dts | 1 - src/arm/rk3288-tinker.dtsi | 3 +- src/arm/rk3288-veyron.dtsi | 6 +- src/arm/rk3288-vyasa.dts | 1 - src/arm/rk3288.dtsi | 20 +- src/arm/rv1108-elgin-r1.dts | 208 ++ src/arm/rv1108-evb.dts | 20 +- src/arm/rv1108.dtsi | 37 + src/arm/s3c2416-smdk2416.dts | 5 +- src/arm/s5pv210-aries.dtsi | 90 + src/arm/s5pv210-fascinate4g.dts | 7 - src/arm/s5pv210-galaxys.dts | 7 - src/arm/s5pv210.dtsi | 25 +- src/arm/sama5d2-pinfunc.h | 2 +- src/arm/sama5d2.dtsi | 4 +- src/arm/sama5d3.dtsi | 4 +- src/arm/sama5d4.dtsi | 4 +- src/arm/skeleton.dtsi | 18 - src/arm/skeleton64.dtsi | 14 - src/arm/socfpga.dtsi | 16 + src/arm/socfpga_arria10.dtsi | 18 + src/arm/socfpga_cyclone5_chameleon96.dts | 130 ++ src/arm/spear13xx.dtsi | 4 +- src/arm/spear3xx.dtsi | 4 +- src/arm/spear600.dtsi | 4 +- src/arm/ste-nomadik-nhk15.dts | 85 +- src/arm/ste-nomadik-stn8815.dtsi | 2 +- src/arm/ste-u300.dts | 2 +- src/arm/stm32429i-eval.dts | 1 + src/arm/stm32746g-eval.dts | 1 + src/arm/stm32f429-disco.dts | 1 + src/arm/stm32f429.dtsi | 64 +- src/arm/stm32f469-disco.dts | 1 + src/arm/stm32f746-disco.dts | 1 + src/arm/stm32f746.dtsi | 4 +- src/arm/stm32f769-disco.dts | 1 + src/arm/stm32h743-pinctrl.dtsi | 15 + src/arm/stm32h743.dtsi | 17 +- src/arm/stm32h743i-disco.dts | 18 + src/arm/stm32h743i-eval.dts | 18 + src/arm/stm32mp157-pinctrl.dtsi | 7 + src/arm/stm32mp157c-ed1.dts | 8 + src/arm/stm32mp157c-ev1.dts | 10 +- src/arm/stm32mp157c.dtsi | 97 +- src/arm/sun4i-a10.dtsi | 44 + src/arm/sun5i-a13-q8-tablet.dts | 7 +- src/arm/sun5i-reference-design-tablet.dtsi | 2 +- src/arm/sun7i-a20-bananapi.dts | 5 + src/arm/sun8i-a23-a33.dtsi | 175 +- src/arm/sun8i-a23-ippo-q8h-v1.2.dts | 4 + src/arm/sun8i-a23-ippo-q8h-v5.dts | 4 + src/arm/sun8i-a23-q8-tablet.dts | 4 + src/arm/sun8i-a23.dtsi | 20 + src/arm/sun8i-a33.dtsi | 194 +- src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts | 4 + src/arm/sun8i-a83t-bananapi-m3.dts | 8 + src/arm/sun8i-a83t-cubietruck-plus.dts | 8 + src/arm/sun8i-h3-nanopi-m1-plus.dts | 25 + src/arm/sun8i-q8-common.dtsi | 37 + src/arm/sun8i-r40-bananapi-m2-ultra.dts | 41 + src/arm/sun8i-r40.dtsi | 15 + src/arm/sun9i-a80-cubieboard4.dts | 44 +- src/arm/sun9i-a80-optimus.dts | 44 +- src/arm/sun9i-a80.dtsi | 65 + src/arm/sunxi-bananapi-m2-plus.dtsi | 14 + src/arm/sunxi-h3-h5.dtsi | 3 +- src/arm/tegra114-dalmore.dts | 2 +- src/arm/tegra124-jetson-tk1.dts | 2 +- src/arm/tegra124-nyan.dtsi | 2 +- src/arm/tegra124-venice2.dts | 2 +- src/arm/tegra20-trimslice.dts | 2 +- src/arm/tegra20.dtsi | 15 +- src/arm/tegra30-beaver.dts | 2 +- src/arm/tegra30-cardhu.dtsi | 2 +- src/arm/versatile-ab.dts | 2 +- src/arm/vexpress-v2m-rs1.dtsi | 2 +- src/arm/vexpress-v2m.dtsi | 2 +- src/arm/vexpress-v2p-ca15_a7.dts | 5 + src/arm/vf610-bk4.dts | 31 + src/arm/vf610-zii-cfu1.dts | 2 +- src/arm/vf610-zii-ssmb-dtu.dts | 311 +++ src/arm/vf610-zii-ssmb-spu3.dts | 3 + src/arm/vt8500.dtsi | 9 +- src/arm/wm8505.dtsi | 9 +- src/arm/wm8650.dtsi | 9 +- src/arm/wm8750.dtsi | 9 +- src/arm/wm8850.dtsi | 9 +- src/arm/zx296702-ad1.dts | 1 + src/arm/zx296702.dtsi | 4 +- src/arm/zynq-zturn.dts | 2 +- src/arm64/actions/s700-cubieboard7.dts | 53 + src/arm64/actions/s700.dtsi | 66 +- src/arm64/actions/s900.dtsi | 18 +- src/arm64/al/alpine-v2.dtsi | 8 +- .../allwinner/sun50i-a64-bananapi-m64.dts | 8 + src/arm64/allwinner/sun50i-a64-nanopi-a64.dts | 4 + src/arm64/allwinner/sun50i-a64-olinuxino.dts | 8 + .../allwinner/sun50i-a64-orangepi-win.dts | 8 + src/arm64/allwinner/sun50i-a64-pine64.dts | 8 + src/arm64/allwinner/sun50i-a64-teres-i.dts | 10 +- src/arm64/allwinner/sun50i-a64.dtsi | 38 +- .../sun50i-h5-libretech-all-h3-cc.dts | 4 + src/arm64/allwinner/sun50i-h5.dtsi | 8 +- src/arm64/allwinner/sun50i-h6.dtsi | 44 +- src/arm64/altera/socfpga_stratix10.dtsi | 40 +- src/arm64/amlogic/meson-axg-s400.dts | 30 +- src/arm64/amlogic/meson-axg.dtsi | 33 +- src/arm64/amlogic/meson-g12a-x96-max.dts | 28 + src/arm64/amlogic/meson-g12a.dtsi | 70 +- src/arm64/amlogic/meson-gx.dtsi | 31 +- src/arm64/amlogic/meson-gxbb.dtsi | 6 + src/arm64/amlogic/meson-gxl.dtsi | 6 + src/arm64/amlogic/meson-gxm.dtsi | 8 +- src/arm64/apm/apm-shadowcat.dtsi | 16 +- src/arm64/apm/apm-storm.dtsi | 16 +- src/arm64/arm/foundation-v8-gicv2.dtsi | 2 +- src/arm64/arm/foundation-v8-gicv3.dtsi | 2 +- src/arm64/arm/foundation-v8.dtsi | 106 +- src/arm64/arm/fvp-base-revc.dts | 277 +++ src/arm64/arm/juno-base.dtsi | 108 +- src/arm64/arm/juno-r1.dts | 12 +- src/arm64/arm/juno-r2.dts | 18 +- src/arm64/arm/juno.dts | 18 +- src/arm64/arm/rtsm_ve-aemv8a.dts | 106 +- src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi | 27 + src/arm64/arm/rtsm_ve-motherboard.dtsi | 14 +- src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts | 4 +- src/arm64/arm/vexpress-v2m-rs1.dtsi | 2 +- src/arm64/bitmain/bm1880-sophon-edge.dts | 50 + src/arm64/bitmain/bm1880.dtsi | 119 + src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts | 2 + src/arm64/broadcom/northstar2/ns2.dtsi | 8 +- src/arm64/broadcom/stingray/stingray.dtsi | 16 +- src/arm64/cavium/thunder-88xx.dtsi | 96 +- src/arm64/cavium/thunder2-99xx.dtsi | 8 +- src/arm64/exynos/exynos5433.dtsi | 16 +- src/arm64/exynos/exynos7.dtsi | 8 +- src/arm64/freescale/fsl-ls1012a-oxalis.dts | 96 + src/arm64/freescale/fsl-ls1012a.dtsi | 2 + src/arm64/freescale/fsl-ls1028a-rdb.dts | 17 + src/arm64/freescale/fsl-ls1028a.dtsi | 35 + src/arm64/freescale/fsl-ls1043a-qds.dts | 2 +- src/arm64/freescale/fsl-ls1043a.dtsi | 6 + src/arm64/freescale/fsl-ls1046a-qds.dts | 2 +- src/arm64/freescale/fsl-ls1046a-rdb.dts | 4 +- src/arm64/freescale/fsl-ls1046a.dtsi | 45 +- src/arm64/freescale/fsl-ls1088a.dtsi | 97 +- src/arm64/freescale/fsl-ls208xa.dtsi | 6 + src/arm64/freescale/fsl-lx2160a-rdb.dts | 26 + src/arm64/freescale/fsl-lx2160a.dtsi | 133 ++ src/arm64/freescale/imx8mm-pinfunc.h | 629 ++++++ src/arm64/freescale/imx8mq-evk.dts | 47 + src/arm64/freescale/imx8mq.dtsi | 322 ++- src/arm64/freescale/imx8qxp-mek.dts | 137 ++ src/arm64/freescale/imx8qxp.dtsi | 446 ++++ src/arm64/hisilicon/hi3660-hikey960.dts | 3 +- src/arm64/hisilicon/hi3660.dtsi | 16 +- src/arm64/hisilicon/hi3670.dtsi | 16 +- src/arm64/hisilicon/hi3798cv200-poplar.dts | 4 +- src/arm64/hisilicon/hi3798cv200.dtsi | 4 +- src/arm64/hisilicon/hi6220-hikey.dts | 2 +- src/arm64/hisilicon/hi6220.dtsi | 18 +- src/arm64/hisilicon/hip05.dtsi | 32 +- src/arm64/hisilicon/hip06.dtsi | 32 +- src/arm64/hisilicon/hip07.dtsi | 128 +- src/arm64/lg/lg1312.dtsi | 8 +- src/arm64/lg/lg1313.dtsi | 8 +- src/arm64/marvell/armada-3720-espressobin.dts | 12 + src/arm64/marvell/armada-3720-uDPU.dts | 162 ++ src/arm64/marvell/armada-372x.dtsi | 2 +- src/arm64/marvell/armada-37xx.dtsi | 82 +- src/arm64/marvell/armada-7040-db.dts | 4 - src/arm64/marvell/armada-8040-db.dts | 4 - src/arm64/marvell/armada-ap806-dual.dtsi | 4 +- src/arm64/marvell/armada-ap806-quad.dtsi | 8 +- src/arm64/marvell/armada-ap806.dtsi | 18 +- .../marvell/armada-ap810-ap0-octa-core.dtsi | 16 +- src/arm64/marvell/armada-cp110.dtsi | 15 +- src/arm64/mediatek/mt2712-evb.dts | 98 + src/arm64/mediatek/mt2712e.dtsi | 555 +++++ src/arm64/mediatek/mt6797-evb.dts | 2 + src/arm64/mediatek/mt6797-x20-dev.dts | 2 + src/arm64/mediatek/mt6797.dtsi | 28 + src/arm64/mediatek/mt7622.dtsi | 13 +- src/arm64/mediatek/mt8173.dtsi | 6 +- src/arm64/nvidia/tegra132.dtsi | 4 +- src/arm64/nvidia/tegra186-p2771-0000.dts | 19 +- src/arm64/nvidia/tegra186-p3310.dtsi | 10 +- src/arm64/nvidia/tegra186.dtsi | 32 +- src/arm64/nvidia/tegra194-p2888.dtsi | 2 +- src/arm64/nvidia/tegra194-p2972-0000.dts | 11 +- src/arm64/nvidia/tegra194.dtsi | 93 +- src/arm64/nvidia/tegra210-p2371-2180.dts | 21 + src/arm64/nvidia/tegra210-p2597.dtsi | 33 +- src/arm64/nvidia/tegra210-p2894-0050-a08.dts | 9 + src/arm64/nvidia/tegra210-p2894.dtsi | 1858 ++++++++++++++++ src/arm64/nvidia/tegra210-smaug.dts | 34 +- src/arm64/nvidia/tegra210.dtsi | 96 +- src/arm64/qcom/apq8016-sbc.dtsi | 2 + src/arm64/qcom/ipq8074.dtsi | 8 +- src/arm64/qcom/msm8916.dtsi | 16 +- src/arm64/qcom/msm8992.dtsi | 2 +- src/arm64/qcom/msm8994.dtsi | 2 +- src/arm64/qcom/msm8996-pins.dtsi | 2 +- src/arm64/qcom/msm8996.dtsi | 36 +- src/arm64/qcom/msm8998-mtp.dtsi | 24 + src/arm64/qcom/msm8998.dtsi | 278 +++ src/arm64/qcom/pm8005.dtsi | 6 +- src/arm64/qcom/pm8916.dtsi | 6 + src/arm64/qcom/pm8998.dtsi | 28 +- src/arm64/qcom/pmi8994.dtsi | 12 +- src/arm64/qcom/pmi8998.dtsi | 16 +- src/arm64/qcom/pms405.dtsi | 79 + src/arm64/qcom/qcs404-evb.dtsi | 19 + src/arm64/qcom/qcs404.dtsi | 359 ++++ src/arm64/qcom/sdm845-mtp.dts | 84 +- src/arm64/qcom/sdm845.dtsi | 1046 +++++++-- src/arm64/realtek/rtd1295.dtsi | 8 +- src/arm64/renesas/cat875.dtsi | 44 + src/arm64/renesas/r8a774a1.dtsi | 14 +- src/arm64/renesas/r8a774c0-cat874.dts | 106 + src/arm64/renesas/r8a774c0-ek874.dts | 14 + src/arm64/renesas/r8a774c0.dtsi | 1910 +++++++++++++++++ src/arm64/renesas/r8a7795.dtsi | 56 +- src/arm64/renesas/r8a7796-salvator-xs.dts | 3 +- src/arm64/renesas/r8a7796.dtsi | 52 +- src/arm64/renesas/r8a77965.dtsi | 4 +- src/arm64/renesas/r8a77970-v3msk.dts | 2 + src/arm64/renesas/r8a77970.dtsi | 4 +- src/arm64/renesas/r8a77980.dtsi | 8 +- src/arm64/renesas/r8a77990-ebisu.dts | 26 +- src/arm64/renesas/r8a77990.dtsi | 230 +- src/arm64/renesas/r8a77995-draak.dts | 4 +- src/arm64/renesas/r8a77995.dtsi | 2 +- src/arm64/renesas/salvator-common.dtsi | 1 + src/arm64/renesas/ulcb-kf.dtsi | 138 ++ src/arm64/renesas/ulcb.dtsi | 71 +- src/arm64/rockchip/px30.dtsi | 8 +- src/arm64/rockchip/rk3328-roc-cc.dts | 5 +- src/arm64/rockchip/rk3328-rock64.dts | 29 +- src/arm64/rockchip/rk3328.dtsi | 80 +- src/arm64/rockchip/rk3368-evb.dtsi | 1 - src/arm64/rockchip/rk3368-geekbox.dts | 1 - src/arm64/rockchip/rk3368-lion.dtsi | 1 - src/arm64/rockchip/rk3368-orion-r68-meta.dts | 1 - src/arm64/rockchip/rk3368-px5-evb.dts | 1 - src/arm64/rockchip/rk3368-r88.dts | 1 - src/arm64/rockchip/rk3368.dtsi | 16 +- src/arm64/rockchip/rk3399-gru-chromebook.dtsi | 13 + src/arm64/rockchip/rk3399-gru-scarlet.dtsi | 46 +- src/arm64/rockchip/rk3399-gru.dtsi | 13 - src/arm64/rockchip/rk3399-nanopc-t4.dts | 91 + src/arm64/rockchip/rk3399-nanopi-m4.dts | 66 + src/arm64/rockchip/rk3399-nanopi4.dtsi | 703 ++++++ src/arm64/rockchip/rk3399-rock-pi-4.dts | 607 ++++++ src/arm64/rockchip/rk3399-rock960.dtsi | 110 +- src/arm64/rockchip/rk3399-rockpro64.dts | 83 +- .../rockchip/rk3399-sapphire-excavator.dts | 1 - src/arm64/rockchip/rk3399.dtsi | 12 +- src/arm64/socionext/uniphier-ld11.dtsi | 4 +- src/arm64/socionext/uniphier-ld20-global.dts | 8 +- src/arm64/socionext/uniphier-ld20.dtsi | 55 +- src/arm64/socionext/uniphier-pxs3-ref.dts | 12 +- src/arm64/socionext/uniphier-pxs3.dtsi | 55 +- src/arm64/sprd/sc2731.dtsi | 56 +- src/arm64/sprd/sc9836.dtsi | 8 +- src/arm64/sprd/sc9860.dtsi | 16 +- src/arm64/sprd/sp9860g-1h10.dts | 16 + src/arm64/synaptics/as370.dtsi | 8 +- src/arm64/synaptics/berlin4ct.dtsi | 8 +- src/arm64/ti/k3-am65-main.dtsi | 118 + src/arm64/ti/k3-am65-mcu.dtsi | 30 + src/arm64/ti/k3-am654-base-board.dts | 65 + src/arm64/ti/k3-am654.dtsi | 8 +- src/arm64/xilinx/zynqmp-zcu100-revC.dts | 1 + src/arm64/xilinx/zynqmp.dtsi | 8 +- src/arm64/zte/zx296718.dtsi | 8 +- src/mips/cavium-octeon/octeon_3xxx.dts | 14 + src/mips/cavium-octeon/ubnt_e100.dts | 6 + src/powerpc/akebono.dts | 2 +- src/powerpc/bluestone.dts | 2 +- src/powerpc/currituck.dts | 2 +- src/powerpc/iss4xx-mpic.dts | 2 +- src/powerpc/wii.dts | 22 + 897 files changed, 30545 insertions(+), 4879 deletions(-) delete mode 100644 Bindings/arm/armadeus.txt delete mode 100644 Bindings/arm/bhf.txt create mode 100644 Bindings/arm/bitmain.yaml delete mode 100644 Bindings/arm/compulab-boards.txt create mode 100644 Bindings/arm/freescale/fsl,imx7ulp-sim.txt delete mode 100644 Bindings/arm/fsl.txt create mode 100644 Bindings/arm/fsl.yaml delete mode 100644 Bindings/arm/i2se.txt delete mode 100644 Bindings/arm/l2c2x0.txt create mode 100644 Bindings/arm/l2c2x0.yaml delete mode 100644 Bindings/arm/olimex.txt delete mode 100644 Bindings/arm/pmu.txt create mode 100644 Bindings/arm/pmu.yaml create mode 100644 Bindings/arm/renesas.yaml delete mode 100644 Bindings/arm/shmobile.txt create mode 100644 Bindings/arm/socionext/milbeaut.yaml delete mode 100644 Bindings/arm/technologic.txt delete mode 100644 Bindings/clock/fixed-clock.txt create mode 100644 Bindings/clock/fixed-clock.yaml delete mode 100644 Bindings/clock/fixed-factor-clock.txt create mode 100644 Bindings/clock/fixed-factor-clock.yaml create mode 100644 Bindings/clock/fixed-mmio-clock.txt create mode 100644 Bindings/clock/imx8mm-clock.txt create mode 100644 Bindings/crypto/samsung-slimsss.txt create mode 100644 Bindings/display/amlogic,simple-framebuffer.txt create mode 100644 Bindings/display/arm,komeda.txt create mode 100644 Bindings/display/bridge/ti,ds90c185.txt create mode 100644 Bindings/display/msm/gmu.txt rename Bindings/display/panel/{auo,g101evn010 => auo,g101evn010.txt} (100%) create mode 100644 Bindings/display/panel/innolux,ee101ia-01d.txt create mode 100644 Bindings/display/panel/lemaker,bl035-rgb-002.txt create mode 100644 Bindings/display/panel/pda,91-00156-a0.txt create mode 100644 Bindings/display/panel/sitronix,st7701.txt create mode 100644 Bindings/dma/fsl-qdma.txt create mode 100644 Bindings/edac/aspeed-sdram-edac.txt create mode 100644 Bindings/extcon/extcon-ptn5150.txt create mode 100644 Bindings/firmware/nvidia,tegra210-bpmp.txt create mode 100644 Bindings/gnss/mediatek.txt create mode 100644 Bindings/gpio/gateworks,pld-gpio.txt create mode 100644 Bindings/gpio/intel,ixp4xx-gpio.txt create mode 100644 Bindings/hwmon/ad741x.txt create mode 100644 Bindings/hwmon/dps650ab.txt create mode 100644 Bindings/hwmon/hih6130.txt create mode 100644 Bindings/hwmon/lm75.txt create mode 100644 Bindings/i2c/i2c-iop3xx.txt rename Bindings/i2c/{i2c-mtk.txt => i2c-mt65xx.txt} (95%) rename Bindings/i2c/{i2c-st-ddci2c.txt => i2c-stu300.txt} (100%) rename Bindings/i2c/{i2c-sunxi-p2wi.txt => i2c-sun6i-p2wi.txt} (100%) rename Bindings/i2c/{i2c-vt8500.txt => i2c-wmt.txt} (100%) create mode 100644 Bindings/iio/adc/adi,ad7606.txt create mode 100644 Bindings/iio/adc/adi,ad7768-1.txt create mode 100644 Bindings/iio/adc/ingenic,adc.txt rename Bindings/{staging => }/iio/adc/lpc32xx-adc.txt (100%) create mode 100644 Bindings/iio/adc/nuvoton,npcm-adc.txt create mode 100644 Bindings/iio/adc/stmpe-adc.txt create mode 100644 Bindings/iio/adc/ti-ads124s08.txt create mode 100644 Bindings/iio/chemical/bme680.txt create mode 100644 Bindings/iio/chemical/plantower,pms7003.txt create mode 100644 Bindings/iio/chemical/sensirion,sgp30.txt create mode 100644 Bindings/iio/chemical/sensirion,sps30.txt create mode 100644 Bindings/iio/dac/ti,dac7612.txt create mode 100644 Bindings/iio/impedance-analyzer/ad5933.txt create mode 100644 Bindings/iio/light/max44009.txt create mode 100644 Bindings/input/ilitek,ili2xxx.txt create mode 100644 Bindings/input/msm-vibrator.txt create mode 100644 Bindings/input/st,stpmic1-onkey.txt create mode 100644 Bindings/interconnect/interconnect.txt create mode 100644 Bindings/interconnect/qcom,sdm845.txt delete mode 100644 Bindings/interrupt-controller/arm,gic-v3.txt create mode 100644 Bindings/interrupt-controller/arm,gic-v3.yaml delete mode 100644 Bindings/interrupt-controller/arm,gic.txt create mode 100644 Bindings/interrupt-controller/arm,gic.yaml create mode 100644 Bindings/interrupt-controller/loongson,ls1x-intc.txt delete mode 100644 Bindings/iommu/nvidia,tegra20-gart.txt create mode 100644 Bindings/leds/leds-trigger-pattern.txt create mode 100644 Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt create mode 100644 Bindings/media/i2c/melexis,mlx90640.txt create mode 100644 Bindings/media/i2c/mt9m001.txt create mode 100644 Bindings/media/imx7-csi.txt create mode 100644 Bindings/media/imx7-mipi-csi2.txt create mode 100644 Bindings/media/si470x.txt create mode 100644 Bindings/mfd/cirrus,lochnagar.txt create mode 100644 Bindings/mfd/st,stpmic1.txt delete mode 100644 Bindings/mips/lantiq/rcu-gphy.txt create mode 100644 Bindings/misc/qcom,fastrpc.txt create mode 100644 Bindings/mtd/amlogic,meson-nand.txt create mode 100644 Bindings/mtd/stm32-fmc2-nand.txt create mode 100644 Bindings/net/fsl-enetc.txt create mode 100644 Bindings/net/mdio-mux-multiplexer.txt create mode 100644 Bindings/net/qcom,ethqos.txt create mode 100644 Bindings/nvmem/xlnx,zynqmp-nvmem.txt create mode 100644 Bindings/phy/cdns,dphy.txt create mode 100644 Bindings/phy/phy-armada38x-comphy.txt create mode 100644 Bindings/phy/phy-mvebu-utmi.txt create mode 100644 Bindings/pinctrl/fsl,imx50-pinctrl.txt create mode 100644 Bindings/pinctrl/fsl,imx8mm-pinctrl.txt create mode 100644 Bindings/power/qcom,rpmpd.txt create mode 100644 Bindings/power/reset/xlnx,zynqmp-power.txt create mode 100644 Bindings/power/xlnx,zynqmp-genpd.txt delete mode 100644 Bindings/regulator/fixed-regulator.txt create mode 100644 Bindings/regulator/fixed-regulator.yaml create mode 100644 Bindings/regulator/max77650-regulator.txt create mode 100644 Bindings/regulator/rohm,bd70528-regulator.txt create mode 100644 Bindings/reset/brcm,brcmstb-reset.txt create mode 100644 Bindings/reset/xlnx,zynqmp-reset.txt create mode 100644 Bindings/rtc/cdns,rtc.txt create mode 100644 Bindings/rtc/isil,isl1208.txt delete mode 100644 Bindings/rtc/isil,isl1219.txt create mode 100644 Bindings/rtc/nxp,pcf85063.txt create mode 100644 Bindings/rtc/nxp,pcf8523.txt create mode 100644 Bindings/rtc/rtc-meson.txt create mode 100644 Bindings/serial/milbeaut-uart.txt create mode 100644 Bindings/serial/nvidia,tegra194-tcu.txt delete mode 100644 Bindings/serial/pl011.txt create mode 100644 Bindings/serial/pl011.yaml delete mode 100644 Bindings/serial/renesas,rzn1-uart.txt delete mode 100644 Bindings/serial/snps-dw-apb-uart.txt create mode 100644 Bindings/serial/snps-dw-apb-uart.yaml create mode 100644 Bindings/soc/bcm/brcm,bcm2835-pm.txt delete mode 100644 Bindings/sound/audio-graph-scu-card.txt create mode 100644 Bindings/sound/cs35l36.txt create mode 100644 Bindings/sound/cs4341.txt create mode 100644 Bindings/sound/fsl,micfil.txt create mode 100644 Bindings/sound/google,cros-ec-codec.txt create mode 100644 Bindings/sound/ingenic,jz4725b-codec.txt create mode 100644 Bindings/sound/ingenic,jz4740-codec.txt create mode 100644 Bindings/sound/mt6358.txt create mode 100644 Bindings/sound/mt8183-afe-pcm.txt create mode 100644 Bindings/sound/mtk-btcvsd-snd.txt create mode 100644 Bindings/sound/rockchip,rk3328-codec.txt delete mode 100644 Bindings/sound/simple-scu-card.txt create mode 100644 Bindings/sound/sprd-pcm.txt create mode 100644 Bindings/sound/xlnx,audio-formatter.txt create mode 100644 Bindings/sound/xlnx,spdif.txt rename Bindings/{mtd/fsl-quadspi.txt => spi/spi-fsl-qspi.txt} (73%) create mode 100644 Bindings/spi/spi-nxp-fspi.txt create mode 100644 Bindings/spi/spi-sifive.txt create mode 100644 Bindings/sram/milbeaut-smp-sram.txt create mode 100644 Bindings/thermal/brcm,sr-thermal.txt create mode 100644 Bindings/timer/nvidia,tegra210-timer.txt create mode 100644 Bindings/timer/socionext,milbeaut-timer.txt create mode 100644 Bindings/usb/ingenic,jz4740-musb.txt create mode 100644 Bindings/watchdog/st,stpmic1-wdt.txt create mode 100644 include/dt-bindings/clk/lochnagar.h create mode 100644 include/dt-bindings/clock/actions,s500-cmu.h create mode 100644 include/dt-bindings/clock/g12a-aoclkc.h create mode 100644 include/dt-bindings/clock/g12a-clkc.h create mode 100644 include/dt-bindings/clock/imx8mm-clock.h create mode 100644 include/dt-bindings/clock/sifive-fu540-prci.h create mode 100644 include/dt-bindings/iio/adc/ingenic,adc.h create mode 100644 include/dt-bindings/interconnect/qcom,sdm845.h create mode 100644 include/dt-bindings/mfd/st,stpmic1.h create mode 100644 include/dt-bindings/pinctrl/lochnagar.h create mode 100644 include/dt-bindings/power/qcom-rpmpd.h create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-reset.h create mode 100644 include/dt-bindings/reset/g12a-aoclkc.h create mode 100644 include/dt-bindings/reset/imx8mq-reset.h create mode 100644 include/dt-bindings/reset/xlnx-zynqmp-resets.h create mode 100644 include/dt-bindings/soc/bcm2835-pm.h create mode 100644 src/arm/am335x-guardian.dts create mode 100644 src/arm/am3874-iceboard.dts create mode 100644 src/arm/aspeed-bmc-inspur-on5263m5.dts create mode 100644 src/arm/bcm2837-rpi-3-a-plus.dts create mode 100644 src/arm/bcm47094-phicomm-k3.dts create mode 100644 src/arm/imx6-logicpd-baseboard.dtsi create mode 100644 src/arm/imx6-logicpd-som.dtsi create mode 100644 src/arm/imx6dl-yapp4-common.dtsi create mode 100644 src/arm/imx6dl-yapp4-draco.dts create mode 100644 src/arm/imx6dl-yapp4-hydra.dts create mode 100644 src/arm/imx6dl-yapp4-ursa.dts create mode 100644 src/arm/imx6q-logicpd.dts create mode 100644 src/arm/imx6ul-phytec-pcl063.dtsi create mode 100644 src/arm/imx6ul-phytec-peb-eval-01.dtsi create mode 100644 src/arm/imx6ul-phytec-phyboard-segin-full.dts create mode 100644 src/arm/imx6ul-phytec-phyboard-segin.dtsi create mode 100644 src/arm/lpc4357-myd-lpc4357.dts create mode 100644 src/arm/milbeaut-m10v-evb.dts create mode 100644 src/arm/milbeaut-m10v.dtsi create mode 100644 src/arm/r7s9210-rza2mevb.dts create mode 100644 src/arm/r7s9210.dtsi create mode 100644 src/arm/rv1108-elgin-r1.dts delete mode 100644 src/arm/skeleton.dtsi delete mode 100644 src/arm/skeleton64.dtsi create mode 100644 src/arm/socfpga_cyclone5_chameleon96.dts create mode 100644 src/arm/vf610-zii-ssmb-dtu.dts create mode 100644 src/arm64/amlogic/meson-g12a-x96-max.dts create mode 100644 src/arm64/arm/fvp-base-revc.dts create mode 100644 src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi create mode 100644 src/arm64/bitmain/bm1880-sophon-edge.dts create mode 100644 src/arm64/bitmain/bm1880.dtsi create mode 100644 src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts create mode 100644 src/arm64/freescale/fsl-ls1012a-oxalis.dts create mode 100644 src/arm64/freescale/imx8mm-pinfunc.h create mode 100644 src/arm64/freescale/imx8qxp-mek.dts create mode 100644 src/arm64/freescale/imx8qxp.dtsi create mode 100644 src/arm64/marvell/armada-3720-uDPU.dts create mode 100644 src/arm64/nvidia/tegra210-p2894-0050-a08.dts create mode 100644 src/arm64/nvidia/tegra210-p2894.dtsi create mode 100644 src/arm64/renesas/cat875.dtsi create mode 100644 src/arm64/renesas/r8a774c0-cat874.dts create mode 100644 src/arm64/renesas/r8a774c0-ek874.dts create mode 100644 src/arm64/renesas/r8a774c0.dtsi create mode 100644 src/arm64/rockchip/rk3399-nanopc-t4.dts create mode 100644 src/arm64/rockchip/rk3399-nanopi-m4.dts create mode 100644 src/arm64/rockchip/rk3399-nanopi4.dtsi create mode 100644 src/arm64/rockchip/rk3399-rock-pi-4.dts diff --git a/Bindings/Makefile b/Bindings/Makefile index 50daa0b3b032..63b139f9ae28 100644 --- a/Bindings/Makefile +++ b/Bindings/Makefile @@ -15,7 +15,7 @@ DT_TMP_SCHEMA := processed-schema.yaml extra-y += $(DT_TMP_SCHEMA) quiet_cmd_mk_schema = SCHEMA $@ - cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^) + cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs) DT_DOCS = $(shell \ cd $(srctree)/$(src) && \ diff --git a/Bindings/arm/amlogic.txt b/Bindings/arm/amlogic.txt index 8dbc259081e4..7f40cb5f490b 100644 --- a/Bindings/arm/amlogic.txt +++ b/Bindings/arm/amlogic.txt @@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) - "amlogic,u200" (Meson g12a s905d2) + - "amediatech,x96-max" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Bindings/arm/armadeus.txt b/Bindings/arm/armadeus.txt deleted file mode 100644 index 9821283ff516..000000000000 --- a/Bindings/arm/armadeus.txt +++ /dev/null @@ -1,6 +0,0 @@ -Armadeus i.MX Platforms Device Tree Bindings ------------------------------------------------ - -APF51: i.MX51 based module. -Required root node properties: - - compatible = "armadeus,imx51-apf51", "fsl,imx51"; diff --git a/Bindings/arm/atmel-sysregs.txt b/Bindings/arm/atmel-sysregs.txt index 14f319f694b7..e61d00e25b95 100644 --- a/Bindings/arm/atmel-sysregs.txt +++ b/Bindings/arm/atmel-sysregs.txt @@ -21,7 +21,8 @@ Its subnodes can be: RSTC Reset Controller required properties: - compatible: Should be "atmel,-rstc". - can be "at91sam9260" or "at91sam9g45" or "sama5d3" + can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7" + it also can be "microchip,sam9x60-rstc" - reg: Should contain registers location and length - clocks: phandle to input clock. @@ -147,6 +148,7 @@ required properties: - compatible: Should be "atmel,-sfr", "syscon" or "atmel,-sfrbu", "syscon" can be "sama5d3", "sama5d4" or "sama5d2". + It also can be "microchip,sam9x60-sfr", "syscon". - reg: Should contain registers location and length sfr@f0038000 { diff --git a/Bindings/arm/bcm/brcm,bcm2835.txt b/Bindings/arm/bcm/brcm,bcm2835.txt index 0dcc3ea5adff..245328f36580 100644 --- a/Bindings/arm/bcm/brcm,bcm2835.txt +++ b/Bindings/arm/bcm/brcm,bcm2835.txt @@ -30,6 +30,10 @@ Raspberry Pi 2 Model B Required root node properties: compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; +Raspberry Pi 3 Model A+ +Required root node properties: +compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + Raspberry Pi 3 Model B Required root node properties: compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; diff --git a/Bindings/arm/bhf.txt b/Bindings/arm/bhf.txt deleted file mode 100644 index 886b503caf9c..000000000000 --- a/Bindings/arm/bhf.txt +++ /dev/null @@ -1,6 +0,0 @@ -Beckhoff Automation Platforms Device Tree Bindings --------------------------------------------------- - -CX9020 Embedded PC -Required root node properties: - - compatible = "bhf,cx9020", "fsl,imx53"; diff --git a/Bindings/arm/bitmain.yaml b/Bindings/arm/bitmain.yaml new file mode 100644 index 000000000000..0efdb4ac028e --- /dev/null +++ b/Bindings/arm/bitmain.yaml @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bitmain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bitmain platform device tree bindings + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + items: + - enum: + - bitmain,sophon-edge + - const: bitmain,bm1880 +... diff --git a/Bindings/arm/compulab-boards.txt b/Bindings/arm/compulab-boards.txt deleted file mode 100644 index 42a10285af9c..000000000000 --- a/Bindings/arm/compulab-boards.txt +++ /dev/null @@ -1,25 +0,0 @@ -CompuLab SB-SOM is a multi-module baseboard capable of carrying: - - CM-T43 - - CM-T54 - - CM-QS600 - - CL-SOM-AM57x - - CL-SOM-iMX7 -modules with minor modifications to the SB-SOM assembly. - -Required root node properties: - - compatible = should be "compulab,sb-som" - -Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on -Freescale i.MX7 ARM Cortex-A7 System-on-Chip. - -Required root node properties: - - compatible = "compulab,cl-som-imx7", "fsl,imx7d"; - -Compulab SBC-iMX7 is a single board computer based on the -Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with -the CL-SOM-iMX7 System-on-Module providing most of the functions, -and SB-SOM-iMX7 carrier board providing additional peripheral -functions and connectors. - -Required root node properties: - - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d"; diff --git a/Bindings/arm/cpus.yaml b/Bindings/arm/cpus.yaml index 298c17b327c6..82dd7582e945 100644 --- a/Bindings/arm/cpus.yaml +++ b/Bindings/arm/cpus.yaml @@ -228,6 +228,7 @@ patternProperties: - renesas,r9a06g032-smp - rockchip,rk3036-smp - rockchip,rk3066-smp + - socionext,milbeaut-m10v-smp - ste,dbx500-smp cpu-release-addr: diff --git a/Bindings/arm/freescale/fsl,imx7ulp-sim.txt b/Bindings/arm/freescale/fsl,imx7ulp-sim.txt new file mode 100644 index 000000000000..7d0c7f002401 --- /dev/null +++ b/Bindings/arm/freescale/fsl,imx7ulp-sim.txt @@ -0,0 +1,16 @@ +Freescale i.MX7ULP System Integration Module +---------------------------------------------- +The system integration module (SIM) provides system control and chip configuration +registers. In this module, chip revision information is located in JTAG ID register, +and a set of registers have been made available in DGO domain for SW use, with the +objective to maintain its value between system resets. + +Required properties: +- compatible: Should be "fsl,imx7ulp-sim". +- reg: Specifies base physical address and size of the register sets. + +Example: +sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; +}; diff --git a/Bindings/arm/freescale/fsl,scu.txt b/Bindings/arm/freescale/fsl,scu.txt index 27784b6edfed..72d481c8dd48 100644 --- a/Bindings/arm/freescale/fsl,scu.txt +++ b/Bindings/arm/freescale/fsl,scu.txt @@ -58,7 +58,11 @@ This binding for the SCU power domain providers uses the generic power domain binding[2]. Required properties: -- compatible: Should be "fsl,imx8qxp-scu-pd". +- compatible: Should be one of: + "fsl,imx8qm-scu-pd", + "fsl,imx8qxp-scu-pd" + followed by "fsl,scu-pd" + - #power-domain-cells: Must be 1. Contains the Resource ID used by SCU commands. See detailed Resource ID list from: @@ -70,7 +74,10 @@ Clock bindings based on SCU Message Protocol This binding uses the common clock binding[1]. Required properties: -- compatible: Should be "fsl,imx8qxp-clock". +- compatible: Should be one of: + "fsl,imx8qm-clock" + "fsl,imx8qxp-clock" + followed by "fsl,scu-clk" - #clock-cells: Should be 1. Contains the Clock ID value. - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names @@ -137,7 +144,7 @@ firmware { &lsio_mu1 1 3>; clk: clk { - compatible = "fsl,imx8qxp-clk"; + compatible = "fsl,imx8qxp-clk", "fsl,scu-clk"; #clock-cells = <1>; }; @@ -154,7 +161,7 @@ firmware { }; pd: imx8qx-pd { - compatible = "fsl,imx8qxp-scu-pd"; + compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd"; #power-domain-cells = <1>; }; diff --git a/Bindings/arm/fsl.txt b/Bindings/arm/fsl.txt deleted file mode 100644 index 7fbc42484001..000000000000 --- a/Bindings/arm/fsl.txt +++ /dev/null @@ -1,237 +0,0 @@ -Freescale i.MX Platforms Device Tree Bindings ------------------------------------------------ - -i.MX23 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx23-evk", "fsl,imx23"; - -i.MX25 Product Development Kit -Required root node properties: - - compatible = "fsl,imx25-pdk", "fsl,imx25"; - -i.MX27 Product Development Kit -Required root node properties: - - compatible = "fsl,imx27-pdk", "fsl,imx27"; - -i.MX28 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx28-evk", "fsl,imx28"; - -i.MX51 Babbage Board -Required root node properties: - - compatible = "fsl,imx51-babbage", "fsl,imx51"; - -i.MX53 Automotive Reference Design Board -Required root node properties: - - compatible = "fsl,imx53-ard", "fsl,imx53"; - -i.MX53 Evaluation Kit -Required root node properties: - - compatible = "fsl,imx53-evk", "fsl,imx53"; - -i.MX53 Quick Start Board -Required root node properties: - - compatible = "fsl,imx53-qsb", "fsl,imx53"; - -i.MX53 Smart Mobile Reference Design Board -Required root node properties: - - compatible = "fsl,imx53-smd", "fsl,imx53"; - -i.MX6 Quad Armadillo2 Board -Required root node properties: - - compatible = "fsl,imx6q-arm2", "fsl,imx6q"; - -i.MX6 Quad SABRE Lite Board -Required root node properties: - - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; - -i.MX6 Quad SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; - -i.MX6 Quad SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; - -i.MX6SLL EVK board -Required root node properties: - - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; - -i.MX6 Quad Plus SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; - -i.MX6 Quad Plus SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp"; - -i.MX6 DualLite SABRE Smart Device Board -Required root node properties: - - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; - -i.MX6 DualLite/Solo SABRE Automotive Board -Required root node properties: - - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; - -i.MX6 SoloLite EVK Board -Required root node properties: - - compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; - -i.MX6 UltraLite 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; - -i.MX6 UltraLiteLite 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; - -i.MX6 ULZ 14x14 EVK Board -Required root node properties: - - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; - -i.MX6 SoloX SDB Board -Required root node properties: - - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; - -i.MX6 SoloX Sabre Auto Board -Required root node properties: - - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; - -i.MX7 SabreSD Board -Required root node properties: - - compatible = "fsl,imx7d-sdb", "fsl,imx7d"; - -i.MX7ULP Evaluation Kit -Required root node properties: - - compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp"; - -Generic i.MX boards -------------------- - -No iomux setup is done for these boards, so this must have been configured -by the bootloader for boards to work with the generic bindings. - -i.MX27 generic board -Required root node properties: - - compatible = "fsl,imx27"; - -i.MX51 generic board -Required root node properties: - - compatible = "fsl,imx51"; - -i.MX53 generic board -Required root node properties: - - compatible = "fsl,imx53"; - -i.MX6q generic board -Required root node properties: - - compatible = "fsl,imx6q"; - -i.MX7ULP generic board -Required root node properties: - - compatible = "fsl,imx7ulp"; - -Freescale Vybrid Platform Device Tree Bindings ----------------------------------------------- - -For the Vybrid SoC familiy all variants with DDR controller are supported, -which is the VF5xx and VF6xx series. Out of historical reasons, in most -places the kernel uses vf610 to refer to the whole familiy. -The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 -core support. - -Required root node compatible property (one of them): - - compatible = "fsl,vf500"; - - compatible = "fsl,vf510"; - - compatible = "fsl,vf600"; - - compatible = "fsl,vf610"; - - compatible = "fsl,vf610m4"; - -Freescale LS1021A Platform Device Tree Bindings ------------------------------------------------- - -Required root node compatible properties: - - compatible = "fsl,ls1021a"; - -Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ----------------------------------------------------------------- - -LS1012A SoC -Required root node properties: - - compatible = "fsl,ls1012a"; - -LS1012A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; - -LS1012A ARMv8 based FRDM Board -Required root node properties: - - compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; - -LS1012A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; - -LS1043A SoC -Required root node properties: - - compatible = "fsl,ls1043a"; - -LS1043A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; - -LS1043A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; - -LS1046A SoC -Required root node properties: - - compatible = "fsl,ls1046a"; - -LS1046A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; - -LS1046A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; - -LS1088A SoC -Required root node properties: - - compatible = "fsl,ls1088a"; - -LS1088A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; - -LS1088A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; - -LS2080A SoC -Required root node properties: - - compatible = "fsl,ls2080a"; - -LS2080A ARMv8 based Simulator model -Required root node properties: - - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; - -LS2080A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; - -LS2080A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; - -LS2088A SoC -Required root node properties: - - compatible = "fsl,ls2088a"; - -LS2088A ARMv8 based QDS Board -Required root node properties: - - compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; - -LS2088A ARMv8 based RDB Board -Required root node properties: - - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; diff --git a/Bindings/arm/fsl.yaml b/Bindings/arm/fsl.yaml new file mode 100644 index 000000000000..7e2cd6ad26bd --- /dev/null +++ b/Bindings/arm/fsl.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX Platforms Device Tree Bindings + +maintainers: + - Shawn Guo + - Li Yang + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: i.MX23 based Boards + items: + - enum: + - fsl,imx23-evk + - olimex,imx23-olinuxino + - const: fsl,imx23 + + - description: i.MX25 Product Development Kit + items: + - enum: + - fsl,imx25-pdk + - const: fsl,imx25 + + - description: i.MX27 Product Development Kit + items: + - enum: + - fsl,imx27-pdk + - const: fsl,imx27 + + - description: i.MX28 based Boards + items: + - enum: + - fsl,imx28-evk + - i2se,duckbill + - i2se,duckbill-2 + - technologic,imx28-ts4600 + - const: fsl,imx28 + - description: i.MX28 Duckbill 2 based Boards + items: + - enum: + - i2se,duckbill-2-485 + - i2se,duckbill-2-enocean + - i2se,duckbill-2-spi + - const: i2se,duckbill-2 + - const: fsl,imx28 + + - description: i.MX51 Babbage Board + items: + - enum: + - armadeus,imx51-apf51 + - fsl,imx51-babbage + - technologic,imx51-ts4800 + - const: fsl,imx51 + + - description: i.MX53 based Boards + items: + - enum: + - bhf,cx9020 + - fsl,imx53-ard + - fsl,imx53-evk + - fsl,imx53-qsb + - fsl,imx53-smd + - const: fsl,imx53 + + - description: i.MX6Q based Boards + items: + - enum: + - fsl,imx6q-arm2 + - fsl,imx6q-sabreauto + - fsl,imx6q-sabrelite + - fsl,imx6q-sabresd + - technologic,imx6q-ts4900 + - technologic,imx6q-ts7970 + - const: fsl,imx6q + + - description: i.MX6QP based Boards + items: + - enum: + - fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board + - fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board + - const: fsl,imx6qp + + - description: i.MX6DL based Boards + items: + - enum: + - fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board + - fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board + - technologic,imx6dl-ts4900 + - technologic,imx6dl-ts7970 + - ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board + - ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board + - ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board + - const: fsl,imx6dl + + - description: i.MX6SL based Boards + items: + - enum: + - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board + - const: fsl,imx6sl + + - description: i.MX6SLL based Boards + items: + - enum: + - fsl,imx6sll-evk + - const: fsl,imx6sll + + - description: i.MX6SX based Boards + items: + - enum: + - fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board + - fsl,imx6sx-sdb # i.MX6 SoloX SDB Board + - const: fsl,imx6sx + + - description: i.MX6UL based Boards + items: + - enum: + - fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board + - const: fsl,imx6ul + + - description: i.MX6ULL based Boards + items: + - enum: + - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board + - const: fsl,imx6ull + + - description: i.MX6ULZ based Boards + items: + - enum: + - fsl,imx6ulz-14x14-evk # i.MX6 ULZ 14x14 EVK Board + - const: fsl,imx6ull # This seems odd. Should be last? + - const: fsl,imx6ulz + + - description: i.MX7D based Boards + items: + - enum: + - fsl,imx7d-sdb # i.MX7 SabreSD Board + - const: fsl,imx7d + + - description: + Compulab SBC-iMX7 is a single board computer based on the + Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with + the CL-SOM-iMX7 System-on-Module providing most of the functions, + and SB-SOM-iMX7 carrier board providing additional peripheral + functions and connectors. + items: + - const: compulab,sbc-imx7 + - const: compulab,cl-som-imx7 + - const: fsl,imx7d + + - description: i.MX8QXP based Boards + items: + - enum: + - fsl,imx8qxp-mek # i.MX8QXP MEK Board + - const: fsl,imx8qxp + + - description: + Freescale Vybrid Platform Device Tree Bindings + + For the Vybrid SoC familiy all variants with DDR controller are supported, + which is the VF5xx and VF6xx series. Out of historical reasons, in most + places the kernel uses vf610 to refer to the whole familiy. + The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 + core support. + items: + - enum: + - fsl,vf500 + - fsl,vf510 + - fsl,vf600 + - fsl,vf610 + - fsl,vf610m4 + + - description: LS1012A based Boards + items: + - enum: + - ebs-systart,oxalis + - fsl,ls1012a-rdb + - fsl,ls1012a-frdm + - fsl,ls1012a-qds + - const: fsl,ls1012a + + - description: LS1021A based Boards + items: + - enum: + - fsl,ls1021a-moxa-uc-8410a + - fsl,ls1021a-qds + - fsl,ls1021a-twr + - const: fsl,ls1021a + + - description: LS1043A based Boards + items: + - enum: + - fsl,ls1043a-rdb + - fsl,ls1043a-qds + - const: fsl,ls1043a + + - description: LS1046A based Boards + items: + - enum: + - fsl,ls1046a-qds + - fsl,ls1046a-rdb + - const: fsl,ls1046a + + - description: LS1088A based Boards + items: + - enum: + - fsl,ls1088a-qds + - fsl,ls1088a-rdb + - const: fsl,ls1088a + + - description: LS2080A based Boards + items: + - enum: + - fsl,ls2080a-simu + - fsl,ls2080a-qds + - fsl,ls2080a-rdb + - const: fsl,ls2080a + + - description: LS2088A based Boards + items: + - enum: + - fsl,ls2088a-qds + - fsl,ls2088a-rdb + - const: fsl,ls2088a + +... diff --git a/Bindings/arm/i2se.txt b/Bindings/arm/i2se.txt deleted file mode 100644 index dbd54a3aa07d..000000000000 --- a/Bindings/arm/i2se.txt +++ /dev/null @@ -1,22 +0,0 @@ -I2SE Device Tree Bindings -------------------------- - -Duckbill Board -Required root node properties: - - compatible = "i2se,duckbill", "fsl,imx28"; - -Duckbill 2 Board -Required root node properties: - - compatible = "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 485 Board -Required root node properties: - - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 EnOcean Board -Required root node properties: - - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - -Duckbill 2 SPI Board -Required root node properties: - - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28"; diff --git a/Bindings/arm/l2c2x0.txt b/Bindings/arm/l2c2x0.txt deleted file mode 100644 index fbe6cb21f4cf..000000000000 --- a/Bindings/arm/l2c2x0.txt +++ /dev/null @@ -1,114 +0,0 @@ -* ARM L2 Cache Controller - -ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/ -PL310 and variants) based level 2 cache controller. All these various implementations -of the L2 cache controller have compatible programming models (Note 1). -Some of the properties that are just prefixed "cache-*" are taken from section -3.7.3 of the Devicetree Specification which can be found at: -https://www.devicetree.org/specifications/ - -The ARM L2 cache representation in the device tree should be done as follows: - -Required properties: - -- compatible : should be one of: - "arm,pl310-cache" - "arm,l220-cache" - "arm,l210-cache" - "bcm,bcm11351-a2-pl310-cache": DEPRECATED by "brcm,bcm11351-a2-pl310-cache" - "brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an - offset needs to be added to the address before passing down to the L2 - cache controller - "marvell,aurora-system-cache": Marvell Controller designed to be - compatible with the ARM one, with system cache mode (meaning - maintenance operations on L1 are broadcasted to the L2 and L2 - performs the same operation). - "marvell,aurora-outer-cache": Marvell Controller designed to be - compatible with the ARM one with outer cache mode. - "marvell,tauros3-cache": Marvell Tauros3 cache controller, compatible - with arm,pl310-cache controller. -- cache-unified : Specifies the cache is a unified cache. -- cache-level : Should be set to 2 for a level 2 cache. -- reg : Physical base address and size of cache controller's memory mapped - registers. - -Optional properties: - -- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of - read, write and setup latencies. Minimum valid values are 1. Controllers - without setup latency control should use a value of 0. -- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of - read, write and setup latencies. Controllers without setup latency control - should use 0. Controllers without separate read and write Tag RAM latency - values should only use the first cell. -- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell. -- arm,filter-ranges : Starting address and length of window to - filter. Addresses in the filter window are directed to the M1 port. Other - addresses will go to the M0 port. -- arm,io-coherent : indicates that the system is operating in an hardware - I/O coherent mode. Valid only when the arm,pl310-cache compatible - string is used. -- interrupts : 1 combined interrupt. -- cache-size : specifies the size in bytes of the cache -- cache-sets : specifies the number of associativity sets of the cache -- cache-block-size : specifies the size in bytes of a cache block -- cache-line-size : specifies the size in bytes of a line in the cache, - if this is not specified, the line size is assumed to be equal to the - cache block size -- cache-id-part: cache id part number to be used if it is not present - on hardware -- wt-override: If present then L2 is forced to Write through mode -- arm,double-linefill : Override double linefill enable setting. Enable if - non-zero, disable if zero. -- arm,double-linefill-incr : Override double linefill on INCR read. Enable - if non-zero, disable if zero. -- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable - if non-zero, disable if zero. -- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero, - disable if zero. -- arm,prefetch-offset : Override prefetch offset value. Valid values are - 0-7, 15, 23, and 31. -- arm,shared-override : The default behavior of the L220 or PL310 cache - controllers with respect to the shareable attribute is to transform "normal - memory non-cacheable transactions" into "cacheable no allocate" (for reads) - or "write through no write allocate" (for writes). - On systems where this may cause DMA buffer corruption, this property must be - specified to indicate that such transforms are precluded. -- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310). -- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310). -- arm,outer-sync-disable : disable the outer sync operation on the L2 cache. - Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that - will randomly hang unless outer sync operations are disabled. -- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> - (forcibly enable), property absent (retain settings set by firmware) -- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), - <1> (forcibly enable), property absent (retain settings set by - firmware) -- arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly - disable), <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable), - <1> (forcibly enable), property absent (OS specific behavior, - preferably retain firmware settings) -- arm,early-bresp-disable : Disable the CA9 optimization Early BRESP (PL310) -- arm,full-line-zero-disable : Disable the CA9 optimization Full line of zero - write (PL310) - -Example: - -L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfff12000 0x1000>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <2 2 2>; - arm,filter-ranges = <0x80000000 0x8000000>; - cache-unified; - cache-level = <2>; - interrupts = <45>; -}; - -Note 1: The description in this document doesn't apply to integrated L2 - cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These - integrated L2 controllers are assumed to be all preconfigured by - early secure boot code. Thus no need to deal with their configuration - in the kernel at all. diff --git a/Bindings/arm/l2c2x0.yaml b/Bindings/arm/l2c2x0.yaml new file mode 100644 index 000000000000..bfc5c185561c --- /dev/null +++ b/Bindings/arm/l2c2x0.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/l2c2x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM L2 Cache Controller + +maintainers: + - Rob Herring + +description: |+ + ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/ + PL220/PL310 and variants) based level 2 cache controller. All these various + implementations of the L2 cache controller have compatible programming + models (Note 1). Some of the properties that are just prefixed "cache-*" are + taken from section 3.7.3 of the Devicetree Specification which can be found + at: + https://www.devicetree.org/specifications/ + + Note 1: The description in this document doesn't apply to integrated L2 + cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These + integrated L2 controllers are assumed to be all preconfigured by + early secure boot code. Thus no need to deal with their configuration + in the kernel at all. + +allOf: + - $ref: /schemas/cache-controller.yaml# + +properties: + compatible: + enum: + - arm,pl310-cache + - arm,l220-cache + - arm,l210-cache + # DEPRECATED by "brcm,bcm11351-a2-pl310-cache" + - bcm,bcm11351-a2-pl310-cache + # For Broadcom bcm11351 chipset where an + # offset needs to be added to the address before passing down to the L2 + # cache controller + - brcm,bcm11351-a2-pl310-cache + # Marvell Controller designed to be + # compatible with the ARM one, with system cache mode (meaning + # maintenance operations on L1 are broadcasted to the L2 and L2 + # performs the same operation). + - marvell,aurora-system-cache + # Marvell Controller designed to be + # compatible with the ARM one with outer cache mode. + - marvell,aurora-outer-cache + # Marvell Tauros3 cache controller, compatible + # with arm,pl310-cache controller. + - marvell,tauros3-cache + + cache-level: + const: 2 + + cache-unified: true + cache-size: true + cache-sets: true + cache-block-size: true + cache-line-size: true + + reg: + maxItems: 1 + + arm,data-latency: + description: Cycles of latency for Data RAM accesses. Specifies 3 cells of + read, write and setup latencies. Minimum valid values are 1. Controllers + without setup latency control should use a value of 0. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 2 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,tag-latency: + description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of + read, write and setup latencies. Controllers without setup latency control + should use 0. Controllers without separate read and write Tag RAM latency + values should only use the first cell. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 8 + + arm,dirty-latency: + description: Cycles of latency for Dirty RAMs. This is a single cell. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + maximum: 8 + + arm,filter-ranges: + description: Starting address and length of window to + filter. Addresses in the filter window are directed to the M1 port. Other + addresses will go to the M0 port. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 2 + maxItems: 2 + + arm,io-coherent: + description: indicates that the system is operating in an hardware + I/O coherent mode. Valid only when the arm,pl310-cache compatible + string is used. + type: boolean + + interrupts: + # Either a single combined interrupt or up to 9 individual interrupts + minItems: 1 + maxItems: 9 + + cache-id-part: + description: cache id part number to be used if it is not present + on hardware + $ref: /schemas/types.yaml#/definitions/uint32 + + wt-override: + description: If present then L2 is forced to Write through mode + type: boolean + + arm,double-linefill: + description: Override double linefill enable setting. Enable if + non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,double-linefill-incr: + description: Override double linefill on INCR read. Enable + if non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,double-linefill-wrap: + description: Override double linefill on WRAP read. Enable + if non-zero, disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,prefetch-drop: + description: Override prefetch drop enable setting. Enable if non-zero, + disable if zero. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,prefetch-offset: + description: Override prefetch offset value. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31 ] + + arm,shared-override: + description: The default behavior of the L220 or PL310 cache + controllers with respect to the shareable attribute is to transform "normal + memory non-cacheable transactions" into "cacheable no allocate" (for reads) + or "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must + be specified to indicate that such transforms are precluded. + type: boolean + + arm,parity-enable: + description: enable parity checking on the L2 cache (L220 or PL310). + type: boolean + + arm,parity-disable: + description: disable parity checking on the L2 cache (L220 or PL310). + type: boolean + + arm,outer-sync-disable: + description: disable the outer sync operation on the L2 cache. + Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that + will randomly hang unless outer sync operations are disabled. + type: boolean + + prefetch-data: + description: | + Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + prefetch-instr: + description: | + Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,dynamic-clock-gating: + description: | + L2 dynamic clock gating. Value: <0> (forcibly + disable), <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,standby-mode: + description: L2 standby mode enable. Value <0> (forcibly disable), + <1> (forcibly enable), property absent (OS specific behavior, + preferably retain firmware settings) + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [ 0, 1 ] + + arm,early-bresp-disable: + description: Disable the CA9 optimization Early BRESP (PL310) + type: boolean + + arm,full-line-zero-disable: + description: Disable the CA9 optimization Full line of zero + write (PL310) + type: boolean + +required: + - compatible + - cache-unified + - reg + +additionalProperties: false + +examples: + - | + cache-controller@fff12000 { + compatible = "arm,pl310-cache"; + reg = <0xfff12000 0x1000>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x80000000 0x8000000>; + cache-unified; + cache-level = <2>; + interrupts = <45>; + }; + +... diff --git a/Bindings/arm/mediatek.txt b/Bindings/arm/mediatek.txt index 8f260e5cfd16..56ac7896d6d8 100644 --- a/Bindings/arm/mediatek.txt +++ b/Bindings/arm/mediatek.txt @@ -15,11 +15,12 @@ compatible: Must contain one of "mediatek,mt6795" "mediatek,mt6797" "mediatek,mt7622" - "mediatek,mt7623" which is referred to MT7623N SoC - "mediatek,mt7623a" + "mediatek,mt7623" + "mediatek,mt7629" "mediatek,mt8127" "mediatek,mt8135" "mediatek,mt8173" + "mediatek,mt8183" Supported boards: @@ -57,6 +58,9 @@ Supported boards: - Reference board variant 1 for MT7622: Required root node properties: - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; +- Bananapi BPI-R64 for MT7622: + Required root node properties: + - compatible = "bananapi,bpi-r64", "mediatek,mt7622"; - Reference board for MT7623a with eMMC: Required root node properties: - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; @@ -68,6 +72,9 @@ Supported boards: - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; - Bananapi BPI-R2 board: - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; +- Reference board for MT7629: + Required root node properties: + - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; @@ -77,3 +84,6 @@ Supported boards: - MTK mt8173 tablet EVB: Required root node properties: - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; +- Evaluation board for MT8183: + Required root node properties: + - compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; diff --git a/Bindings/arm/olimex.txt b/Bindings/arm/olimex.txt deleted file mode 100644 index d726aeca56be..000000000000 --- a/Bindings/arm/olimex.txt +++ /dev/null @@ -1,10 +0,0 @@ -Olimex Device Tree Bindings ---------------------------- - -SAM9-L9260 Board -Required root node properties: - - compatible = "olimex,sam9-l9260", "atmel,at91sam9260"; - -i.MX23 Olinuxino Low Cost Board -Required root node properties: - - compatible = "olimex,imx23-olinuxino", "fsl,imx23"; diff --git a/Bindings/arm/pmu.txt b/Bindings/arm/pmu.txt deleted file mode 100644 index 13611a8199bb..000000000000 --- a/Bindings/arm/pmu.txt +++ /dev/null @@ -1,70 +0,0 @@ -* ARM Performance Monitor Units - -ARM cores often have a PMU for counting cpu and cache events like cache misses -and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU -representation in the device tree should be done as under:- - -Required properties: - -- compatible : should be one of - "apm,potenza-pmu" - "arm,armv8-pmuv3" - "arm,cortex-a73-pmu" - "arm,cortex-a72-pmu" - "arm,cortex-a57-pmu" - "arm,cortex-a53-pmu" - "arm,cortex-a35-pmu" - "arm,cortex-a17-pmu" - "arm,cortex-a15-pmu" - "arm,cortex-a12-pmu" - "arm,cortex-a9-pmu" - "arm,cortex-a8-pmu" - "arm,cortex-a7-pmu" - "arm,cortex-a5-pmu" - "arm,arm11mpcore-pmu" - "arm,arm1176-pmu" - "arm,arm1136-pmu" - "brcm,vulcan-pmu" - "cavium,thunder-pmu" - "qcom,scorpion-pmu" - "qcom,scorpion-mp-pmu" - "qcom,krait-pmu" -- interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu - interrupt (PPI) then 1 interrupt should be specified. - -Optional properties: - -- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU - nodes corresponding directly to the affinity of - the SPIs listed in the interrupts property. - - When using a PPI, specifies a list of phandles to CPU - nodes corresponding to the set of CPUs which have - a PMU of this type signalling the PPI listed in the - interrupts property, unless this is already specified - by the PPI interrupt specifier itself (in which case - the interrupt-affinity property shouldn't be present). - - This property should be present when there is more than - a single SPI. - - -- qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd - events. - -- secure-reg-access : Indicates that the ARMv7 Secure Debug Enable Register - (SDER) is accessible. This will cause the driver to do - any setup required that is only possible in ARMv7 secure - state. If not present the ARMv7 SDER will not be touched, - which means the PMU may fail to operate unless external - code (bootloader or security monitor) has performed the - appropriate initialisation. Note that this property is - not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux - in Non-secure state. - -Example: - -pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <100 101>; -}; diff --git a/Bindings/arm/pmu.yaml b/Bindings/arm/pmu.yaml new file mode 100644 index 000000000000..52ae094ce330 --- /dev/null +++ b/Bindings/arm/pmu.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Performance Monitor Units + +maintainers: + - Mark Rutland + - Will Deacon + +description: |+ + ARM cores often have a PMU for counting cpu and cache events like cache misses + and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU + representation in the device tree should be done as under:- + +properties: + compatible: + items: + - enum: + - apm,potenza-pmu + - arm,armv8-pmuv3 + - arm,cortex-a73-pmu + - arm,cortex-a72-pmu + - arm,cortex-a57-pmu + - arm,cortex-a53-pmu + - arm,cortex-a35-pmu + - arm,cortex-a17-pmu + - arm,cortex-a15-pmu + - arm,cortex-a12-pmu + - arm,cortex-a9-pmu + - arm,cortex-a8-pmu + - arm,cortex-a7-pmu + - arm,cortex-a5-pmu + - arm,arm11mpcore-pmu + - arm,arm1176-pmu + - arm,arm1136-pmu + - brcm,vulcan-pmu + - cavium,thunder-pmu + - qcom,scorpion-pmu + - qcom,scorpion-mp-pmu + - qcom,krait-pmu + + interrupts: + # Don't know how many CPUs, so no constraints to specify + description: 1 per-cpu interrupt (PPI) or 1 interrupt per core. + + interrupt-affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + When using SPIs, specifies a list of phandles to CPU + nodes corresponding directly to the affinity of + the SPIs listed in the interrupts property. + + When using a PPI, specifies a list of phandles to CPU + nodes corresponding to the set of CPUs which have + a PMU of this type signalling the PPI listed in the + interrupts property, unless this is already specified + by the PPI interrupt specifier itself (in which case + the interrupt-affinity property shouldn't be present). + + This property should be present when there is more than + a single SPI. + + qcom,no-pc-write: + type: boolean + description: + Indicates that this PMU doesn't support the 0xc and 0xd events. + + secure-reg-access: + type: boolean + description: + Indicates that the ARMv7 Secure Debug Enable Register + (SDER) is accessible. This will cause the driver to do + any setup required that is only possible in ARMv7 secure + state. If not present the ARMv7 SDER will not be touched, + which means the PMU may fail to operate unless external + code (bootloader or security monitor) has performed the + appropriate initialisation. Note that this property is + not valid for non-ARMv7 CPUs or ARMv7 CPUs booting Linux + in Non-secure state. + +required: + - compatible + +... diff --git a/Bindings/arm/renesas.yaml b/Bindings/arm/renesas.yaml new file mode 100644 index 000000000000..19f379863d50 --- /dev/null +++ b/Bindings/arm/renesas.yaml @@ -0,0 +1,238 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/shmobile.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings + +maintainers: + - Geert Uytterhoeven + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Emma Mobile EV2 + items: + - enum: + - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual + - const: renesas,emev2 + + - description: RZ/A1H (R7S72100) + items: + - enum: + - renesas,genmai # Genmai (RTK772100BC00000BR) + - renesas,gr-peach # GR-Peach (X28A-M01-E/F) + - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE) + - const: renesas,r7s72100 + + - description: RZ/A2 (R7S9210) + items: + - enum: + - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE) + - const: renesas,r7s9210 + + - description: SH-Mobile AG5 (R8A73A00/SH73A0) + items: + - enum: + - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT + - const: renesas,sh73a0 + + - description: R-Mobile APE6 (R8A73A40) + items: + - enum: + - renesas,ape6evm + - const: renesas,r8a73a4 + + - description: R-Mobile A1 (R8A77400) + items: + - enum: + - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA + - const: renesas,r8a7740 + + - description: RZ/G1H (R8A77420) + items: + - const: renesas,r8a7742 + + - description: RZ/G1M (R8A77430) + items: + - enum: + # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7743 + + - items: + - enum: + # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE) + - const: renesas,r8a7743 + + - description: RZ/G1N (R8A77440) + items: + - enum: + # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7744 + + - items: + - enum: + # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - const: renesas,r8a7744 + + - description: RZ/G1E (R8A77450) + items: + - enum: + - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) + - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE) + - const: renesas,r8a7745 + + - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) + items: + - const: iwave,g22d + - const: iwave,g22m + - const: renesas,r8a7745 + + - description: RZ/G1C (R8A77470) + items: + - enum: + - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + - const: renesas,r8a77470 + + - description: RZ/G2M (R8A774A1) + items: + - const: renesas,r8a774a1 + + - description: RZ/G2E (R8A774C0) + items: + - enum: + - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874) + - const: renesas,r8a774c0 + + - items: + - enum: + - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875) + - const: si-linux,cat874 + - const: renesas,r8a774c0 + + - description: R-Car M1A (R8A77781) + items: + - enum: + - renesas,bockw + - const: renesas,r8a7778 + + - description: R-Car H1 (R8A77790) + items: + - enum: + - renesas,marzen # Marzen (R0P7779A00010S) + - const: renesas,r8a7779 + + - description: R-Car H2 (R8A77900) + items: + - enum: + - renesas,lager # Lager (RTP0RC7790SEB00010S) + - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) + - const: renesas,r8a7790 + + - description: R-Car M2-W (R8A77910) + items: + - enum: + - renesas,henninger + - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S) + - renesas,porter # Porter (M2-LCDP) + - const: renesas,r8a7791 + + - description: R-Car V2H (R8A77920) + items: + - enum: + - renesas,blanche # Blanche (RTP0RC7792SEB00010S) + - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE) + - const: renesas,r8a7792 + + - description: R-Car M2-N (R8A77930) + items: + - enum: + - renesas,gose # Gose (RTP0RC7793SEB00010S) + - const: renesas,r8a7793 + + - description: R-Car E2 (R8A77940) + items: + - enum: + - renesas,alt # Alt (RTP0RC7794SEB00010S) + - renesas,silk # SILK (RTP0RC7794LCB00011S) + - const: renesas,r8a7794 + + - description: R-Car H3 (R8A77950) + items: + - enum: + # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) + # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) + - renesas,h3ulcb + - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) + - const: renesas,r8a7795 + + - description: R-Car M3-W (R8A77960) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) + - const: renesas,r8a7796 + + - description: Kingfisher (SBEV-RCAR-KF-M03) + items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - enum: + - renesas,r8a7795 + - renesas,r8a7796 + + - description: R-Car M3-N (R8A77965) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) + - const: renesas,r8a77965 + + - description: R-Car V3M (R8A77970) + items: + - enum: + - renesas,eagle # Eagle (RTP0RC77970SEB0010S) + - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10) + - const: renesas,r8a77970 + + - description: R-Car V3H (R8A77980) + items: + - enum: + - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) + - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10) + - const: renesas,r8a77980 + + - description: R-Car E3 (R8A77990) + items: + - enum: + - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S) + - const: renesas,r8a77990 + + - description: R-Car D3 (R8A77995) + items: + - enum: + - renesas,draak # Draak (RTP0RC77995SEB0010S) + - const: renesas,r8a77995 + + - description: RZ/N1D (R9A06G032) + items: + - enum: + - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + - const: renesas,r9a06g032 + +... diff --git a/Bindings/arm/rockchip.yaml b/Bindings/arm/rockchip.yaml index b12958bda09c..061a03edf9c8 100644 --- a/Bindings/arm/rockchip.yaml +++ b/Bindings/arm/rockchip.yaml @@ -60,6 +60,11 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Elgin RV1108 R1 + items: + - const: elgin,rv1108-r1 + - const: rockchip,rv1108 + - description: Firefly Firefly-RK3288 items: - enum: @@ -87,6 +92,13 @@ properties: - const: firefly,roc-rk3399-pc - const: rockchip,rk3399 + - description: FriendlyElec NanoPi4 series boards + items: + - enum: + - friendlyarm,nanopc-t4 + - friendlyarm,nanopi-m4 + - const: rockchip,rk3399 + - description: GeekBuying GeekBox items: - const: geekbuying,geekbox @@ -317,6 +329,11 @@ properties: - const: radxa,rock - const: rockchip,rk3188 + - description: Radxa ROCK Pi 4 + items: + - const: radxa,rockpi4 + - const: rockchip,rk3399 + - description: Radxa Rock2 Square items: - const: radxa,rock2-square diff --git a/Bindings/arm/shmobile.txt b/Bindings/arm/shmobile.txt deleted file mode 100644 index 7f91c2a8b54e..000000000000 --- a/Bindings/arm/shmobile.txt +++ /dev/null @@ -1,155 +0,0 @@ -Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings --------------------------------------------------------------------- - -SoCs: - - - Emma Mobile EV2 - compatible = "renesas,emev2" - - RZ/A1H (R7S72100) - compatible = "renesas,r7s72100" - - RZ/A2 (R7S9210) - compatible = "renesas,r7s9210" - - SH-Mobile AG5 (R8A73A00/SH73A0) - compatible = "renesas,sh73a0" - - R-Mobile APE6 (R8A73A40) - compatible = "renesas,r8a73a4" - - R-Mobile A1 (R8A77400) - compatible = "renesas,r8a7740" - - RZ/G1H (R8A77420) - compatible = "renesas,r8a7742" - - RZ/G1M (R8A77430) - compatible = "renesas,r8a7743" - - RZ/G1N (R8A77440) - compatible = "renesas,r8a7744" - - RZ/G1E (R8A77450) - compatible = "renesas,r8a7745" - - RZ/G1C (R8A77470) - compatible = "renesas,r8a77470" - - RZ/G2M (R8A774A1) - compatible = "renesas,r8a774a1" - - RZ/G2E (R8A774C0) - compatible = "renesas,r8a774c0" - - R-Car M1A (R8A77781) - compatible = "renesas,r8a7778" - - R-Car H1 (R8A77790) - compatible = "renesas,r8a7779" - - R-Car H2 (R8A77900) - compatible = "renesas,r8a7790" - - R-Car M2-W (R8A77910) - compatible = "renesas,r8a7791" - - R-Car V2H (R8A77920) - compatible = "renesas,r8a7792" - - R-Car M2-N (R8A77930) - compatible = "renesas,r8a7793" - - R-Car E2 (R8A77940) - compatible = "renesas,r8a7794" - - R-Car H3 (R8A77950) - compatible = "renesas,r8a7795" - - R-Car M3-W (R8A77960) - compatible = "renesas,r8a7796" - - R-Car M3-N (R8A77965) - compatible = "renesas,r8a77965" - - R-Car V3M (R8A77970) - compatible = "renesas,r8a77970" - - R-Car V3H (R8A77980) - compatible = "renesas,r8a77980" - - R-Car E3 (R8A77990) - compatible = "renesas,r8a77990" - - R-Car D3 (R8A77995) - compatible = "renesas,r8a77995" - - RZ/N1D (R9A06G032) - compatible = "renesas,r9a06g032" - -Boards: - - - Alt (RTP0RC7794SEB00010S) - compatible = "renesas,alt", "renesas,r8a7794" - - APE6-EVM - compatible = "renesas,ape6evm", "renesas,r8a73a4" - - Atmark Techno Armadillo-800 EVA - compatible = "renesas,armadillo800eva", "renesas,r8a7740" - - Blanche (RTP0RC7792SEB00010S) - compatible = "renesas,blanche", "renesas,r8a7792" - - BOCK-W - compatible = "renesas,bockw", "renesas,r8a7778" - - Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) - compatible = "renesas,condor", "renesas,r8a77980" - - Draak (RTP0RC77995SEB0010S) - compatible = "renesas,draak", "renesas,r8a77995" - - Eagle (RTP0RC77970SEB0010S) - compatible = "renesas,eagle", "renesas,r8a77970" - - Ebisu (RTP0RC77990SEB0010S) - compatible = "renesas,ebisu", "renesas,r8a77990" - - Genmai (RTK772100BC00000BR) - compatible = "renesas,genmai", "renesas,r7s72100" - - GR-Peach (X28A-M01-E/F) - compatible = "renesas,gr-peach", "renesas,r7s72100" - - Gose (RTP0RC7793SEB00010S) - compatible = "renesas,gose", "renesas,r8a7793" - - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) - H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795" - - Henninger - compatible = "renesas,henninger", "renesas,r8a7791" - - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) - compatible = "iwave,g23s", "renesas,r8a77470" - - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) - compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745" - - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) - compatible = "iwave,g22m", "renesas,r8a7745" - - iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) - compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) - compatible = "iwave,g20m", "renesas,r8a7743" - - iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) - compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7744" - - iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) - compatible = "iwave,g20m", "renesas,r8a7744" - - Kingfisher (SBEV-RCAR-KF-M03) - compatible = "shimafuji,kingfisher" - - Koelsch (RTP0RC7791SEB00010S) - compatible = "renesas,koelsch", "renesas,r8a7791" - - Kyoto Microcomputer Co. KZM-A9-Dual - compatible = "renesas,kzm9d", "renesas,emev2" - - Kyoto Microcomputer Co. KZM-A9-GT - compatible = "renesas,kzm9g", "renesas,sh73a0" - - Lager (RTP0RC7790SEB00010S) - compatible = "renesas,lager", "renesas,r8a7790" - - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796" - - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) - compatible = "renesas,m3nulcb", "renesas,r8a77965" - - Marzen (R0P7779A00010S) - compatible = "renesas,marzen", "renesas,r8a7779" - - Porter (M2-LCDP) - compatible = "renesas,porter", "renesas,r8a7791" - - RSKRZA1 (YR0K77210C000BE) - compatible = "renesas,rskrza1", "renesas,r7s72100" - - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) - compatible = "renesas,rzn1d400-db", "renesas,r9a06g032" - - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795" - - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796" - - Salvator-X (RTP0RC7796SIPB0011S (M3-N)) - compatible = "renesas,salvator-x", "renesas,r8a77965" - - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795" - - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7796" - - Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) - compatible = "renesas,salvator-xs", "renesas,r8a77965" - - SILK (RTP0RC7794LCB00011S) - compatible = "renesas,silk", "renesas,r8a7794" - - SK-RZG1E (YR8A77450S000BE) - compatible = "renesas,sk-rzg1e", "renesas,r8a7745" - - SK-RZG1M (YR8A77430S000BE) - compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) - compatible = "renesas,stout", "renesas,r8a7790" - - V3HSK (Y-ASK-RCAR-V3H-WS10) - compatible = "renesas,v3hsk", "renesas,r8a77980" - - V3MSK (Y-ASK-RCAR-V3M-WS10) - compatible = "renesas,v3msk", "renesas,r8a77970" - - Wheat (RTP0RC7792ASKB0000JE) - compatible = "renesas,wheat", "renesas,r8a7792" diff --git a/Bindings/arm/socionext/milbeaut.yaml b/Bindings/arm/socionext/milbeaut.yaml new file mode 100644 index 000000000000..aae53fc3cb1e --- /dev/null +++ b/Bindings/arm/socionext/milbeaut.yaml @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/milbeaut.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Milbeaut platforms device tree bindings + +maintainers: + - Taichi Sugaya + - Takao Orito + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - socionext,milbeaut-m10v-evb + - const: socionext,sc2000a +... diff --git a/Bindings/arm/technologic.txt b/Bindings/arm/technologic.txt deleted file mode 100644 index f1cedc00dcab..000000000000 --- a/Bindings/arm/technologic.txt +++ /dev/null @@ -1,23 +0,0 @@ -Technologic Systems Platforms Device Tree Bindings --------------------------------------------------- - -TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx28-ts4600", "fsl,imx28" - -TS-4800 board -Required root node properties: - - compatible = "technologic,imx51-ts4800", "fsl,imx51"; - -TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl" - - compatible = "technologic,imx6q-ts4900", "fsl,imx6q" - -TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. -It can be mounted on a carrier board providing additional peripheral connectors. -Required root node properties: - - compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl" - - compatible = "technologic,imx6q-ts7970", "fsl,imx6q" diff --git a/Bindings/arm/tegra.yaml b/Bindings/arm/tegra.yaml index fbcde8a7e067..60b38eb5c61a 100644 --- a/Bindings/arm/tegra.yaml +++ b/Bindings/arm/tegra.yaml @@ -87,9 +87,11 @@ properties: - const: nvidia,tegra124 - items: - enum: + - nvidia,darcy - nvidia,p2371-0000 - nvidia,p2371-2180 - nvidia,p2571 + - nvidia,p2894-0050-a08 - const: nvidia,tegra210 - items: - enum: diff --git a/Bindings/bus/imx-weim.txt b/Bindings/bus/imx-weim.txt index 683eaf3aed79..dda7d6d66479 100644 --- a/Bindings/bus/imx-weim.txt +++ b/Bindings/bus/imx-weim.txt @@ -47,9 +47,9 @@ Optional properties: Timing property for child nodes. It is mandatory, not optional. - fsl,weim-cs-timing: The timing array, contains timing values for the - child node. We can get the CS index from the child - node's "reg" property. The number of registers depends - on the selected chip. + child node. We get the CS indexes from the address + ranges in the child node's "reg" property. + The number of registers depends on the selected chip: For i.MX1, i.MX21 ("fsl,imx1-weim") there are two registers: CSxU, CSxL. For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim") @@ -80,3 +80,29 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: 0x0000c000 0x1404a38e 0x00000000>; }; }; + +Example for an imx6q-based board, a multi-chipselect device connected to WEIM: + +In this case, both chip select 0 and 1 will be configured with the same timing +array values. + + weim: weim@21b8000 { + compatible = "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + clocks = <&clks 196>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; + fsl,weim-cs-gpr = <&gpr>; + + acme@0 { + compatible = "acme,whatever"; + reg = <0 0 0x100>, <0 0x400000 0x800>, + <1 0x400000 0x800>; + fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100 + 0x00000000 0xa0000240 0x00000000>; + }; + }; diff --git a/Bindings/clock/actions,owl-cmu.txt b/Bindings/clock/actions,owl-cmu.txt index 2ef86ae96df8..d19885b7c73f 100644 --- a/Bindings/clock/actions,owl-cmu.txt +++ b/Bindings/clock/actions,owl-cmu.txt @@ -2,13 +2,14 @@ The Actions Semi Owl Clock Management Unit generates and supplies clock to various controllers within the SoC. The clock binding described here is -applicable to S900 and S700 SoC's. +applicable to S900, S700 and S500 SoC's. Required Properties: - compatible: should be one of the following, "actions,s900-cmu" "actions,s700-cmu" + "actions,s500-cmu" - reg: physical base address of the controller and length of memory mapped region. - clocks: Reference to the parent clocks ("hosc", "losc") @@ -19,8 +20,8 @@ Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in corresponding -dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be -used in device tree sources. +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h or +actions,s500-cmu.h header and can be used in device tree sources. External clocks: diff --git a/Bindings/clock/amlogic,gxbb-aoclkc.txt b/Bindings/clock/amlogic,gxbb-aoclkc.txt index 79511d7bb321..c41f0be5d438 100644 --- a/Bindings/clock/amlogic,gxbb-aoclkc.txt +++ b/Bindings/clock/amlogic,gxbb-aoclkc.txt @@ -10,6 +10,7 @@ Required Properties: - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc" - GXM (S912) : "amlogic,meson-gxm-aoclkc" - AXG (A113D, A113X) : "amlogic,meson-axg-aoclkc" + - G12A (S905X2, S905D2, S905Y2) : "amlogic,meson-g12a-aoclkc" followed by the common "amlogic,meson-gx-aoclkc" - clocks: list of clock phandle, one for each entry clock-names. - clock-names: should contain the following: diff --git a/Bindings/clock/amlogic,gxbb-clkc.txt b/Bindings/clock/amlogic,gxbb-clkc.txt index a6871953bf04..5c8b105be4d6 100644 --- a/Bindings/clock/amlogic,gxbb-clkc.txt +++ b/Bindings/clock/amlogic,gxbb-clkc.txt @@ -9,6 +9,7 @@ Required Properties: "amlogic,gxbb-clkc" for GXBB SoC, "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. + "amlogic,g12a-clkc" for G12A SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/Bindings/clock/exynos5433-clock.txt b/Bindings/clock/exynos5433-clock.txt index 50d5897c9849..183c327a7d6b 100644 --- a/Bindings/clock/exynos5433-clock.txt +++ b/Bindings/clock/exynos5433-clock.txt @@ -50,6 +50,8 @@ Required Properties: IPs. - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1 which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs. + - "samsung,exynos5433-cmu-imem" - clock controller compatible for CMU_IMEM + which generates clocks for SSS (Security SubSystem) and SlimSSS IPs. - reg: physical base address of the controller and length of memory mapped region. @@ -168,6 +170,12 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 + Input clocks for imem clock controller: + - oscclk + - aclk_imem_sssx_266 + - aclk_imem_266 + - aclk_imem_200 + Optional properties: - power-domains: a phandle to respective power domain node as described by generic PM domain bindings (see power/power_domain.txt for more @@ -469,6 +477,21 @@ Example 2: Examples of clock controller nodes are listed below. power-domains = <&pd_cam1>; }; + cmu_imem: clock-controller@11060000 { + compatible = "samsung,exynos5433-cmu-imem"; + reg = <0x11060000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_imem_sssx_266", + "aclk_imem_266", + "aclk_imem_200"; + clocks = <&xxti>, + <&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_266>, + <&cmu_top CLK_DIV_ACLK_IMEM_200>; + }; + Example 3: UART controller node that consumes the clock generated by the clock controller. diff --git a/Bindings/clock/fixed-clock.txt b/Bindings/clock/fixed-clock.txt deleted file mode 100644 index 0641a663ad69..000000000000 --- a/Bindings/clock/fixed-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Binding for simple fixed-rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-frequency : frequency of clock in Hz. Should be a single cell. - -Optional properties: -- clock-accuracy : accuracy of clock in ppb (parts per billion). - Should be a single cell. -- clock-output-names : From common clock binding. - -Example: - clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - clock-accuracy = <100>; - }; diff --git a/Bindings/clock/fixed-clock.yaml b/Bindings/clock/fixed-clock.yaml new file mode 100644 index 000000000000..b657ecd0ef1c --- /dev/null +++ b/Bindings/clock/fixed-clock.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed-rate clock sources + +maintainers: + - Michael Turquette + - Stephen Boyd + +properties: + compatible: + const: fixed-clock + + "#clock-cells": + const: 0 + + clock-frequency: true + + clock-accuracy: + description: accuracy of clock in ppb (parts per billion). + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clock-frequency + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-accuracy = <100>; + }; +... diff --git a/Bindings/clock/fixed-factor-clock.txt b/Bindings/clock/fixed-factor-clock.txt deleted file mode 100644 index 189467a7188a..000000000000 --- a/Bindings/clock/fixed-factor-clock.txt +++ /dev/null @@ -1,28 +0,0 @@ -Binding for simple fixed factor rate clock sources. - -This binding uses the common clock binding[1]. - -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt - -Required properties: -- compatible : shall be "fixed-factor-clock". -- #clock-cells : from common clock binding; shall be set to 0. -- clock-div: fixed divider. -- clock-mult: fixed multiplier. -- clocks: parent clock. - -Optional properties: -- clock-output-names : From common clock binding. - -Some clocks that require special treatments are also handled by that -driver, with the compatibles: - - allwinner,sun4i-a10-pll3-2x-clk - -Example: - clock { - compatible = "fixed-factor-clock"; - clocks = <&parentclk>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; diff --git a/Bindings/clock/fixed-factor-clock.yaml b/Bindings/clock/fixed-factor-clock.yaml new file mode 100644 index 000000000000..b567f8092f8c --- /dev/null +++ b/Bindings/clock/fixed-factor-clock.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binding for simple fixed factor rate clock sources + +maintainers: + - Michael Turquette + - Stephen Boyd + +properties: + compatible: + enum: + - allwinner,sun4i-a10-pll3-2x-clk + - fixed-factor-clock + + "#clock-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-div: + description: Fixed divider + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 1 + + clock-mult: + description: Fixed multiplier + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + maxItems: 1 + +required: + - compatible + - clocks + - "#clock-cells" + - clock-div + - clock-mult + +additionalProperties: false + +examples: + - | + clock { + compatible = "fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; +... diff --git a/Bindings/clock/fixed-mmio-clock.txt b/Bindings/clock/fixed-mmio-clock.txt new file mode 100644 index 000000000000..c359367fd1a9 --- /dev/null +++ b/Bindings/clock/fixed-mmio-clock.txt @@ -0,0 +1,24 @@ +Binding for simple memory mapped io fixed-rate clock sources. +The driver reads a clock frequency value from a single 32-bit memory mapped +I/O register and registers it as a fixed rate clock. + +It was designed for test systems, like FPGA, not for complete, finished SoCs. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "fixed-mmio-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- reg : Address and length of the clock value register set. + +Optional properties: +- clock-output-names : From common clock binding. + +Example: +sysclock: sysclock@fd020004 { + #clock-cells = <0>; + compatible = "fixed-mmio-clock"; + reg = <0xfd020004 0x4>; +}; diff --git a/Bindings/clock/imx8mm-clock.txt b/Bindings/clock/imx8mm-clock.txt new file mode 100644 index 000000000000..8e4ab9e619a1 --- /dev/null +++ b/Bindings/clock/imx8mm-clock.txt @@ -0,0 +1,29 @@ +* Clock bindings for NXP i.MX8M Mini + +Required properties: +- compatible: Should be "fsl,imx8mm-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "osc_32k" + - "osc_24m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +clk: clock-controller@30380000 { + compatible = "fsl,imx8mm-ccm"; + reg = <0x0 0x30380000 0x0 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; +}; + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h +for the full list of i.MX8M Mini clock IDs. diff --git a/Bindings/clock/nvidia,tegra124-dfll.txt b/Bindings/clock/nvidia,tegra124-dfll.txt index dff236f524a7..958e0ad78c52 100644 --- a/Bindings/clock/nvidia,tegra124-dfll.txt +++ b/Bindings/clock/nvidia,tegra124-dfll.txt @@ -8,10 +8,11 @@ the fast CPU cluster. It consists of a free-running voltage controlled oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop control module that will automatically adjust the VDD_CPU voltage by communicating with an off-chip PMIC either via an I2C bus or via PWM signals. -Currently only the I2C mode is supported by these bindings. Required properties: -- compatible : should be "nvidia,tegra124-dfll" +- compatible : should be one of: + - "nvidia,tegra124-dfll": for Tegra124 + - "nvidia,tegra210-dfll": for Tegra210 - reg : Defines the following set of registers, in the order listed: - registers for the DFLL control logic. - registers for the I2C output logic. @@ -45,10 +46,31 @@ Required properties for the control loop parameters: Optional properties for the control loop parameters: - nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM. +Optional properties for mode selection: +- nvidia,pwm-to-pmic: Use PWM to control regulator rather then I2C. + Required properties for I2C mode: - nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode. -Example: +Required properties for PWM mode: +- nvidia,pwm-period-nanoseconds: period of PWM square wave in nanoseconds. +- nvidia,pwm-tristate-microvolts: Regulator voltage in micro volts when PWM + control is disabled and the PWM output is tristated. Note that this voltage is + configured in hardware, typically via a resistor divider. +- nvidia,pwm-min-microvolts: Regulator voltage in micro volts when PWM control + is enabled and PWM output is low. Hence, this is the minimum output voltage + that the regulator supports when PWM control is enabled. +- nvidia,pwm-voltage-step-microvolts: Voltage increase in micro volts + corresponding to a 1/33th increase in duty cycle. Eg the voltage for 2/33th + duty cycle would be: nvidia,pwm-min-microvolts + + nvidia,pwm-voltage-step-microvolts * 2. +- pinctrl-0: I/O pad configuration when PWM control is enabled. +- pinctrl-1: I/O pad configuration when PWM control is disabled. +- pinctrl-names: must include the following entries: + - dvfs_pwm_enable: I/O pad configuration when PWM control is enabled. + - dvfs_pwm_disable: I/O pad configuration when PWM control is disabled. + +Example for I2C: clock@70110000 { compatible = "nvidia,tegra124-dfll"; @@ -76,3 +98,58 @@ clock@70110000 { nvidia,i2c-fs-rate = <400000>; }; + +Example for PWM: + +clock@70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>, + <&tegra_car TEGRA210_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>;; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + + nvidia,sample-rate = <25000>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,pwm-min-microvolts = <708000>; /* 708mV */ + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; /* 19.2mV */ + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; +}; + +/* pinmux nodes added for completeness. Binding doc can be found in: + * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt + */ + +pinmux: pinmux@700008d4 { + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; +}; diff --git a/Bindings/clock/qcom,rpmcc.txt b/Bindings/clock/qcom,rpmcc.txt index 87b4949e9bc8..944719bd586f 100644 --- a/Bindings/clock/qcom,rpmcc.txt +++ b/Bindings/clock/qcom,rpmcc.txt @@ -16,6 +16,7 @@ Required properties : "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" "qcom,rpmcc-msm8996", "qcom,rpmcc" + "qcom,rpmcc-msm8998", "qcom,rpmcc" "qcom,rpmcc-qcs404", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt index b1669fbfb740..03196d5ea515 100644 --- a/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt +++ b/Bindings/cpufreq/nvidia,tegra124-cpufreq.txt @@ -9,11 +9,9 @@ Required properties: See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - cpu_g: Clock mux for the fast CPU cluster. - - cpu_lp: Clock mux for the low-power CPU cluster. - pll_x: Fast PLL clocksource. - pll_p: Auxiliary PLL used during fast PLL rate changes. - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. -- vdd-cpu-supply: Regulator for CPU voltage Optional properties: - clock-latency: Specify the possible maximum transition latency for clock, @@ -31,13 +29,11 @@ cpus { reg = <0>; clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, - <&tegra_car TEGRA124_CLK_CCLK_LP>, <&tegra_car TEGRA124_CLK_PLL_X>, <&tegra_car TEGRA124_CLK_PLL_P>, <&dfll>; - clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; clock-latency = <300000>; - vdd-cpu-supply: <&vdd_cpu>; }; <...> diff --git a/Bindings/crypto/samsung-slimsss.txt b/Bindings/crypto/samsung-slimsss.txt new file mode 100644 index 000000000000..7ec9a5a7727a --- /dev/null +++ b/Bindings/crypto/samsung-slimsss.txt @@ -0,0 +1,19 @@ +Samsung SoC SlimSSS (Slim Security SubSystem) module + +The SlimSSS module in Exynos5433 SoC supports the following: +-- Feeder (FeedCtrl) +-- Advanced Encryption Standard (AES) with ECB,CBC,CTR,XTS and (CBC/XTS)/CTS +-- SHA-1/SHA-256 and (SHA-1/SHA-256)/HMAC + +Required properties: + +- compatible : Should contain entry for slimSSS version: + - "samsung,exynos5433-slim-sss" for Exynos5433 SoC. +- reg : Offset and length of the register set for the module +- interrupts : interrupt specifiers of SlimSSS module interrupts (one feed + control interrupt). + +- clocks : list of clock phandle and specifier pairs for all clocks listed in + clock-names property. +- clock-names : list of device clock input names; should contain "pclk" and + "aclk" for slim-sss in Exynos5433. diff --git a/Bindings/display/amlogic,simple-framebuffer.txt b/Bindings/display/amlogic,simple-framebuffer.txt new file mode 100644 index 000000000000..aaa6c24c8e70 --- /dev/null +++ b/Bindings/display/amlogic,simple-framebuffer.txt @@ -0,0 +1,33 @@ +Meson specific Simple Framebuffer bindings + +This binding documents meson specific extensions to the simple-framebuffer +bindings. The meson simplefb u-boot code relies on the devicetree containing +pre-populated simplefb nodes. + +These extensions are intended so that u-boot can select the right node based +on which pipeline is being used. As such they are solely intended for +firmware / bootloader use, and the OS should ignore them. + +Required properties: +- compatible: "amlogic,simple-framebuffer", "simple-framebuffer" +- amlogic,pipeline, one of: + "vpu-cvbs" + "vpu-hdmi" + +Example: + +chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + power-domains = <&pwrc_vpu>; + }; +}; diff --git a/Bindings/display/arm,komeda.txt b/Bindings/display/arm,komeda.txt new file mode 100644 index 000000000000..02b226532ebd --- /dev/null +++ b/Bindings/display/arm,komeda.txt @@ -0,0 +1,73 @@ +Device Tree bindings for Arm Komeda display driver + +Required properties: +- compatible: Should be "arm,mali-d71" +- reg: Physical base address and length of the registers in the system +- interrupts: the interrupt line number of the device in the system +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: A list of clock names. It should contain: + - "mclk": for the main processor clock + - "pclk": for the APB interface clock +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Required properties for sub-node: pipeline@nq +Each device contains one or two pipeline sub-nodes (at least one), each +pipeline node should provide properties: +- reg: Zero-indexed identifier for the pipeline +- clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' +- clock-names: should contain: + - "pxclk": pixel clock + - "aclk": AXI interface clock + +- port: each pipeline connect to an encoder input port. The connection is + modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt + +Optional properties: + - memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer may + be located anywhere in memory. + +Example: +/ { + ... + + dp0: display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <0 168 4>; + clocks = <&dpu_mclk>, <&dpu_aclk>; + clock-names = "mclk", "pclk"; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>, <&dpu_aclk>; + clock-names = "pxclk", "aclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; + ... +}; diff --git a/Bindings/display/bridge/cdns,dsi.txt b/Bindings/display/bridge/cdns,dsi.txt index f5725bb6c61c..525a4bfd8634 100644 --- a/Bindings/display/bridge/cdns,dsi.txt +++ b/Bindings/display/bridge/cdns,dsi.txt @@ -31,28 +31,7 @@ Required subnodes: - one subnode per DSI device connected on the DSI bus. Each DSI device should contain a reg property encoding its virtual channel. -Cadence DPHY -============ - -Cadence DPHY block. - -Required properties: -- compatible: should be set to "cdns,dphy". -- reg: physical base address and length of the DPHY registers. -- clocks: DPHY reference clocks. -- clock-names: must contain "psm" and "pll_ref". -- #phy-cells: must be set to 0. - - Example: - dphy0: dphy@fd0e0000{ - compatible = "cdns,dphy"; - reg = <0x0 0xfd0e0000 0x0 0x1000>; - clocks = <&psm_clk>, <&pll_ref_clk>; - clock-names = "psm", "pll_ref"; - #phy-cells = <0>; - }; - dsi0: dsi@fd0c0000 { compatible = "cdns,dsi"; reg = <0x0 0xfd0c0000 0x0 0x1000>; diff --git a/Bindings/display/bridge/lvds-transmitter.txt b/Bindings/display/bridge/lvds-transmitter.txt index 50220190c203..60091db5dfa5 100644 --- a/Bindings/display/bridge/lvds-transmitter.txt +++ b/Bindings/display/bridge/lvds-transmitter.txt @@ -22,13 +22,11 @@ among others. Required properties: -- compatible: Must be one or more of the following - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer - - "lvds-encoder" for a generic LVDS encoder device +- compatible: Must be "lvds-encoder" - When compatible with the generic version, nodes must list the - device-specific version corresponding to the device first - followed by the generic version. + Any encoder compatible with this generic binding, but with additional + properties not listed here, must list a device specific compatible first + followed by this generic compatible. Required nodes: @@ -44,8 +42,6 @@ Example lvds-encoder { compatible = "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; diff --git a/Bindings/display/bridge/renesas,lvds.txt b/Bindings/display/bridge/renesas,lvds.txt index ba5469dd09f3..900a884ad9f5 100644 --- a/Bindings/display/bridge/renesas,lvds.txt +++ b/Bindings/display/bridge/renesas,lvds.txt @@ -8,6 +8,8 @@ Required properties: - compatible : Shall contain one of - "renesas,r8a7743-lvds" for R8A7743 (RZ/G1M) compatible LVDS encoders + - "renesas,r8a7744-lvds" for R8A7744 (RZ/G1N) compatible LVDS encoders + - "renesas,r8a774c0-lvds" for R8A774C0 (RZ/G2E) compatible LVDS encoders - "renesas,r8a7790-lvds" for R8A7790 (R-Car H2) compatible LVDS encoders - "renesas,r8a7791-lvds" for R8A7791 (R-Car M2-W) compatible LVDS encoders - "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders @@ -25,7 +27,7 @@ Required properties: - clock-names: Name of the clocks. This property is model-dependent. - The functional clock, which mandatory for all models, shall be listed first, and shall be named "fck". - - On R8A77990 and R8A77995, the LVDS encoder can use the EXTAL or + - On R8A77990, R8A77995 and R8A774C0, the LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks. Those clocks are optional. When supplied they must be named "extal" and "dclkin.x" respectively, with "x" being the DU_DOTCLKIN numerical index. diff --git a/Bindings/display/bridge/thine,thc63lvdm83d.txt b/Bindings/display/bridge/thine,thc63lvdm83d.txt index 527e236e9a2a..fee3c88e1a17 100644 --- a/Bindings/display/bridge/thine,thc63lvdm83d.txt +++ b/Bindings/display/bridge/thine,thc63lvdm83d.txt @@ -10,7 +10,7 @@ Required properties: Optional properties: -- pwdn-gpios: Power down control GPIO +- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low). Required nodes: diff --git a/Bindings/display/bridge/ti,ds90c185.txt b/Bindings/display/bridge/ti,ds90c185.txt new file mode 100644 index 000000000000..e575f996959a --- /dev/null +++ b/Bindings/display/bridge/ti,ds90c185.txt @@ -0,0 +1,55 @@ +Texas Instruments FPD-Link (LVDS) Serializer +-------------------------------------------- + +The DS90C185 and DS90C187 are low-power serializers for portable +battery-powered applications that reduces the size of the RGB +interface between the host GPU and the display. + +Required properties: + +- compatible: Should be + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer + +Optional properties: + +- powerdown-gpios: Power down control GPIO (the PDB pin, active-low) + +Required nodes: + +The devices have two video ports. Their connections are modeled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for parallel input +- Video port 1 for LVDS output + + +Example +------- + +lvds-encoder { + compatible = "ti,ds90c185", "lvds-encoder"; + + powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&lcdc_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; +}; diff --git a/Bindings/display/msm/gmu.txt b/Bindings/display/msm/gmu.txt new file mode 100644 index 000000000000..3439b38e60f2 --- /dev/null +++ b/Bindings/display/msm/gmu.txt @@ -0,0 +1,59 @@ +Qualcomm adreno/snapdragon GMU (Graphics management unit) + +The GMU is a programmable power controller for the GPU. the CPU controls the +GMU which in turn handles power controls for the GPU. + +Required properties: +- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" + for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" + Note that you need to list the less specific "qcom,adreno-gmu" + for generic matches and the more specific identifier to identify + the specific device. +- reg: Physical base address and length of the GMU registers. +- reg-names: Matching names for the register regions + * "gmu" + * "gmu_pdc" + * "gmu_pdc_seg" +- interrupts: The interrupt signals from the GMU. +- interrupt-names: Matching names for the interrupts + * "hfi" + * "gmu" +- clocks: phandles to the device clocks +- clock-names: Matching names for the clocks + * "gmu" + * "cxo" + * "axi" + * "mnoc" +- power-domains: should be <&clock_gpucc GPU_CX_GDSC> +- iommus: phandle to the adreno iommu +- operating-points-v2: phandle to the OPP operating points + +Example: + +/ { + ... + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>; + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + }; +}; diff --git a/Bindings/display/msm/gpu.txt b/Bindings/display/msm/gpu.txt index f8759145ce1a..aad1aef682f7 100644 --- a/Bindings/display/msm/gpu.txt +++ b/Bindings/display/msm/gpu.txt @@ -10,14 +10,23 @@ Required properties: If "amd,imageon" is used, there should be no top level msm device. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. -- clocks: device clocks +- clocks: device clocks (if applicable) See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required: +- clock-names: the following clocks are required by a3xx, a4xx and a5xx + cores: * "core" * "iface" * "mem_iface" + For GMU attached devices the GPU clocks are not used and are not required. The + following devices should not list clocks: + - qcom,adreno-630.2 +- iommus: optional phandle to an adreno iommu instance +- operating-points-v2: optional phandle to the OPP operating points +- qcom,gmu: For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. Applicable targets: + - qcom,adreno-630.2 -Example: +Example 3xx/4xx/a5xx: / { ... @@ -37,3 +46,30 @@ Example: <&mmcc MMSS_IMEM_AHB_CLK>; }; }; + +Example a6xx (with GMU): + +/ { + ... + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = ; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + }; +}; diff --git a/Bindings/display/panel/auo,g101evn010 b/Bindings/display/panel/auo,g101evn010.txt similarity index 100% rename from Bindings/display/panel/auo,g101evn010 rename to Bindings/display/panel/auo,g101evn010.txt diff --git a/Bindings/display/panel/innolux,ee101ia-01d.txt b/Bindings/display/panel/innolux,ee101ia-01d.txt new file mode 100644 index 000000000000..e5ca4ccd55ed --- /dev/null +++ b/Bindings/display/panel/innolux,ee101ia-01d.txt @@ -0,0 +1,7 @@ +Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel + +Required properties: +- compatible: should be "innolux,ee101ia-01d" + +This binding is compatible with the lvds-panel binding, which is specified +in panel-lvds.txt in this directory. diff --git a/Bindings/display/panel/lemaker,bl035-rgb-002.txt b/Bindings/display/panel/lemaker,bl035-rgb-002.txt new file mode 100644 index 000000000000..74ee7ea6b493 --- /dev/null +++ b/Bindings/display/panel/lemaker,bl035-rgb-002.txt @@ -0,0 +1,12 @@ +LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel + +Required properties: +- compatible: should be "lemaker,bl035-rgb-002" +- power-supply: as specified in the base binding + +Optional properties: +- backlight: as specified in the base binding +- enable-gpios: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Bindings/display/panel/pda,91-00156-a0.txt b/Bindings/display/panel/pda,91-00156-a0.txt new file mode 100644 index 000000000000..1639fb17a9f0 --- /dev/null +++ b/Bindings/display/panel/pda,91-00156-a0.txt @@ -0,0 +1,14 @@ +PDA 91-00156-A0 5.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "pda,91-00156-a0" +- power-supply: this panel requires a single power supply. A phandle to a +regulator needs to be specified here. Compatible with panel-common binding which +is specified in the panel-common.txt in this directory. +- backlight: this panel's backlight is controlled by an external backlight +controller. A phandle to this controller needs to be specified here. +Compatible with panel-common binding which is specified in the panel-common.txt +in this directory. + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Bindings/display/panel/sitronix,st7701.txt b/Bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 000000000000..ccd17597f1f6 --- /dev/null +++ b/Bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; diff --git a/Bindings/display/renesas,du.txt b/Bindings/display/renesas,du.txt index 3c855d9f2719..aedb22b4d161 100644 --- a/Bindings/display/renesas,du.txt +++ b/Bindings/display/renesas,du.txt @@ -7,6 +7,7 @@ Required Properties: - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU + - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -57,6 +58,7 @@ corresponding to each DU output. R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 - + R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - diff --git a/Bindings/display/rockchip/rockchip-vop.txt b/Bindings/display/rockchip/rockchip-vop.txt index b79e5769f0ae..4f58c5a2d195 100644 --- a/Bindings/display/rockchip/rockchip-vop.txt +++ b/Bindings/display/rockchip/rockchip-vop.txt @@ -10,6 +10,7 @@ Required properties: "rockchip,rk3126-vop"; "rockchip,px30-vop-lit"; "rockchip,px30-vop-big"; + "rockchip,rk3066-vop"; "rockchip,rk3188-vop"; "rockchip,rk3288-vop"; "rockchip,rk3368-vop"; diff --git a/Bindings/display/sitronix,st7735r.txt b/Bindings/display/sitronix,st7735r.txt index f0a5090a3326..cd5c7186890a 100644 --- a/Bindings/display/sitronix,st7735r.txt +++ b/Bindings/display/sitronix,st7735r.txt @@ -20,7 +20,7 @@ Example: backlight: backlight { compatible = "gpio-backlight"; gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - } + }; ... diff --git a/Bindings/display/ssd1307fb.txt b/Bindings/display/ssd1307fb.txt index 209d931ef16c..b67f8caa212c 100644 --- a/Bindings/display/ssd1307fb.txt +++ b/Bindings/display/ssd1307fb.txt @@ -36,7 +36,6 @@ ssd1307: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; }; ssd1306: oled@3c { @@ -44,7 +43,6 @@ ssd1306: oled@3c { reg = <0x3c>; pwms = <&pwm 4 3000>; reset-gpios = <&gpio2 7>; - reset-active-low; solomon,com-lrremap; solomon,com-invdir; solomon,com-offset = <32>; diff --git a/Bindings/display/sunxi/sun4i-drm.txt b/Bindings/display/sunxi/sun4i-drm.txt index f426bdb42f18..31ab72cba3d4 100644 --- a/Bindings/display/sunxi/sun4i-drm.txt +++ b/Bindings/display/sunxi/sun4i-drm.txt @@ -156,6 +156,7 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun7i-a20-tcon + * allwinner,sun8i-a23-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-a83t-tcon-lcd * allwinner,sun8i-a83t-tcon-tv @@ -276,6 +277,7 @@ Required properties: - compatible: value must be one of: * allwinner,sun6i-a31-drc * allwinner,sun6i-a31s-drc + * allwinner,sun8i-a23-drc * allwinner,sun8i-a33-drc * allwinner,sun9i-a80-drc - reg: base address and size of the memory-mapped region. @@ -303,6 +305,7 @@ Required properties: * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend * allwinner,sun7i-a20-display-backend + * allwinner,sun8i-a23-display-backend * allwinner,sun8i-a33-display-backend * allwinner,sun9i-a80-display-backend - reg: base address and size of the memory-mapped region. @@ -360,6 +363,7 @@ Required properties: * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend * allwinner,sun7i-a20-display-frontend + * allwinner,sun8i-a23-display-frontend * allwinner,sun8i-a33-display-frontend * allwinner,sun9i-a80-display-frontend - reg: base address and size of the memory-mapped region. @@ -419,6 +423,7 @@ Required properties: * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun7i-a20-display-engine + * allwinner,sun8i-a23-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-a83t-display-engine * allwinner,sun8i-h3-display-engine diff --git a/Bindings/display/tegra/nvidia,tegra20-host1x.txt b/Bindings/display/tegra/nvidia,tegra20-host1x.txt index 593be44a53c9..9999255ac5b6 100644 --- a/Bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -238,6 +238,9 @@ of the following host1x client modules: - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection - nvidia,edid: supplies a binary EDID blob - nvidia,panel: phandle of a display panel + - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane + of the SOR, identified by the cell's index, is mapped via the crossbar to + the pad specified by the cell's value. Optional properties when driving an eDP output: - nvidia,dpaux: phandle to a DispayPort AUX interface diff --git a/Bindings/dma/dma.txt b/Bindings/dma/dma.txt index 6312fb00ce8d..eeb4e4d1771e 100644 --- a/Bindings/dma/dma.txt +++ b/Bindings/dma/dma.txt @@ -16,6 +16,9 @@ Optional properties: - dma-channels: Number of DMA channels supported by the controller. - dma-requests: Number of DMA request signals supported by the controller. +- dma-channel-mask: Bitmask of available DMA channels in ascending order + that are not reserved by firmware and are available to + the kernel. i.e. first channel corresponds to LSB. Example: @@ -29,6 +32,7 @@ Example: #dma-cells = <1>; dma-channels = <32>; dma-requests = <127>; + dma-channel-mask = <0xfffe> }; * DMA router diff --git a/Bindings/dma/fsl-qdma.txt b/Bindings/dma/fsl-qdma.txt new file mode 100644 index 000000000000..6a0ff9059e72 --- /dev/null +++ b/Bindings/dma/fsl-qdma.txt @@ -0,0 +1,57 @@ +NXP Layerscape SoC qDMA Controller +================================== + +This device follows the generic DMA bindings defined in dma/dma.txt. + +Required properties: + +- compatible: Must be one of + "fsl,ls1021a-qdma": for LS1021A Board + "fsl,ls1043a-qdma": for ls1043A Board + "fsl,ls1046a-qdma": for ls1046A Board +- reg: Should contain the register's base address and length. +- interrupts: Should contain a reference to the interrupt used by this + device. +- interrupt-names: Should contain interrupt names: + "qdma-queue0": the block0 interrupt + "qdma-queue1": the block1 interrupt + "qdma-queue2": the block2 interrupt + "qdma-queue3": the block3 interrupt + "qdma-error": the error interrupt +- fsl,dma-queues: Should contain number of queues supported. +- dma-channels: Number of DMA channels supported +- block-number: the virtual block number +- block-offset: the offset of different virtual block +- status-sizes: status queue size of per virtual block +- queue-sizes: command queue size of per virtual block, the size number + based on queues + +Optional properties: + +- dma-channels: Number of DMA channels supported by the controller. +- big-endian: If present registers and hardware scatter/gather descriptors + of the qDMA are implemented in big endian mode, otherwise in little + mode. + +Examples: + + qdma: dma-controller@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = , + , + ; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + dma-channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/Bindings/dma/k3dma.txt b/Bindings/dma/k3dma.txt index 4945aeac4dc4..10a2f15b08a3 100644 --- a/Bindings/dma/k3dma.txt +++ b/Bindings/dma/k3dma.txt @@ -3,7 +3,9 @@ See dma.txt first Required properties: -- compatible: Should be "hisilicon,k3-dma-1.0" +- compatible: Must be one of +- "hisilicon,k3-dma-1.0" +- "hisilicon,hisi-pcm-asp-dma-1.0" - reg: Should contain DMA registers location and length. - interrupts: Should contain one interrupt shared by all channel - #dma-cells: see dma.txt, should be 1, para number diff --git a/Bindings/dma/snps-dma.txt b/Bindings/dma/snps-dma.txt index db757df7057d..0bedceed1963 100644 --- a/Bindings/dma/snps-dma.txt +++ b/Bindings/dma/snps-dma.txt @@ -23,8 +23,6 @@ Deprecated properties: Optional properties: -- is_private: The device channels should be marked as private and not for by the - general purpose DMA channel allocator. False if not passed. - multi-block: Multi block transfers supported by hardware. Array property with one cell per channel. 0: not supported, 1 (default): supported. - snps,dma-protection-control: AHB HPROT[3:1] protection setting. diff --git a/Bindings/dma/sprd-dma.txt b/Bindings/dma/sprd-dma.txt index 7a10fea2e51b..adccea9941f1 100644 --- a/Bindings/dma/sprd-dma.txt +++ b/Bindings/dma/sprd-dma.txt @@ -31,7 +31,7 @@ DMA clients connected to the Spreadtrum DMA controller must use the format described in the dma.txt file, using a two-cell specifier for each channel. The two cells in order are: 1. A phandle pointing to the DMA controller. -2. The channel id. +2. The slave id. spi0: spi@70a00000{ ... diff --git a/Bindings/dma/xilinx/xilinx_dma.txt b/Bindings/dma/xilinx/xilinx_dma.txt index 174af2c45e77..93b6d961dd4f 100644 --- a/Bindings/dma/xilinx/xilinx_dma.txt +++ b/Bindings/dma/xilinx/xilinx_dma.txt @@ -37,10 +37,11 @@ Required properties: Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. -Optional properties: -- xlnx,include-sg: Tells configured for Scatter-mode in - the hardware. Optional properties for AXI DMA: +- xlnx,sg-length-width: Should be set to the width in bits of the length + register as configured in h/w. Takes values {8...26}. If the property + is missing or invalid then the default value 23 is used. This is the + maximum value that is supported by all IP versions. - xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. diff --git a/Bindings/edac/aspeed-sdram-edac.txt b/Bindings/edac/aspeed-sdram-edac.txt new file mode 100644 index 000000000000..6a0f3d90d682 --- /dev/null +++ b/Bindings/edac/aspeed-sdram-edac.txt @@ -0,0 +1,25 @@ +Aspeed AST2500 SoC EDAC node + +The Aspeed AST2500 SoC supports DDR3 and DDR4 memory with and without ECC (error +correction check). + +The memory controller supports SECDED (single bit error correction, double bit +error detection) and single bit error auto scrubbing by reserving 8 bits for +every 64 bit word (effectively reducing available memory to 8/9). + +Note, the bootloader must configure ECC mode in the memory controller. + + +Required properties: +- compatible: should be "aspeed,ast2500-sdram-edac" +- reg: sdram controller register set should be <0x1e6e0000 0x174> +- interrupts: should be AVIC interrupt #0 + + +Example: + + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + }; diff --git a/Bindings/eeprom/at24.txt b/Bindings/eeprom/at24.txt index f9a7c984274c..0e456bbc1213 100644 --- a/Bindings/eeprom/at24.txt +++ b/Bindings/eeprom/at24.txt @@ -75,6 +75,8 @@ Optional properties: - address-width: number of address bits (one of 8, 16). + - num-addresses: total number of i2c slave addresses this device takes + Example: eeprom@52 { @@ -82,4 +84,5 @@ eeprom@52 { reg = <0x52>; pagesize = <32>; wp-gpios = <&gpio1 3 0>; + num-addresses = <8>; }; diff --git a/Bindings/extcon/extcon-ptn5150.txt b/Bindings/extcon/extcon-ptn5150.txt new file mode 100644 index 000000000000..936fbdf12815 --- /dev/null +++ b/Bindings/extcon/extcon-ptn5150.txt @@ -0,0 +1,27 @@ +* PTN5150 CC (Configuration Channel) Logic device + +PTN5150 is a small thin low power CC logic chip supporting the USB Type-C +connector application with CC control logic detection and indication functions. +It is interfaced to the host controller using an I2C interface. + +Required properties: +- compatible: should be "nxp,ptn5150" +- reg: specifies the I2C slave address of the device +- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin + connected to the PTN5150's INTB pin. +- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which + is used to control VBUS. +- pinctrl-names : a pinctrl state named "default" must be defined. +- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus + control. + +Example: + ptn5150@1d { + compatible = "nxp,ptn5150"; + reg = <0x1d>; + int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ptn5150_default>; + status = "okay"; + }; diff --git a/Bindings/firmware/nvidia,tegra186-bpmp.txt b/Bindings/firmware/nvidia,tegra186-bpmp.txt index 0c10802c8327..ff380dadb5f9 100644 --- a/Bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/Bindings/firmware/nvidia,tegra186-bpmp.txt @@ -8,7 +8,6 @@ which can create the interprocessor communication (IPC) between the CPU and BPMP. Required properties: -- name : Should be bpmp - compatible Array of strings One of: diff --git a/Bindings/firmware/nvidia,tegra210-bpmp.txt b/Bindings/firmware/nvidia,tegra210-bpmp.txt new file mode 100644 index 000000000000..68d814e8c09d --- /dev/null +++ b/Bindings/firmware/nvidia,tegra210-bpmp.txt @@ -0,0 +1,35 @@ +NVIDIA Tegra210 Boot and Power Management Processor (BPMP) + +The Boot and Power Management Processor (BPMP) is a co-processor found +in Tegra210 SoC. It is designed to handle the early stages of the boot +process as well as to assisting in entering deep low power state +(suspend to ram), and also offloading DRAM memory clock scaling on +some platforms. The binding document defines the resources that would +be used by the BPMP T210 firmware driver, which can create the +interprocessor communication (IPC) between the CPU and BPMP. + +Required properties: +- compatible + Array of strings + One of: + - "nvidia,tegra210-bpmp" +- reg: physical base address and length for HW synchornization primitives + 1) base address and length to Tegra 'atomics' hardware + 2) base address and length to Tegra 'semaphore' hardware +- interrupts: specifies the interrupt number for receiving messages ("rx") + and for triggering messages ("tx") + +Optional properties: +- #clock-cells : Should be 1 for platforms where DRAM clock control is + offloaded to bpmp. + +Example: + +bpmp@70016000 { + compatible = "nvidia,tegra210-bpmp"; + reg = <0x0 0x70016000 0x0 0x2000 + 0x0 0x60001000 0x0 0x1000>; + interrupts = , + ; + interrupt-names = "tx", "rx"; +}; diff --git a/Bindings/gnss/gnss.txt b/Bindings/gnss/gnss.txt index f1e4a2ff47c5..f547bd4549fe 100644 --- a/Bindings/gnss/gnss.txt +++ b/Bindings/gnss/gnss.txt @@ -17,6 +17,7 @@ Required properties: represents Optional properties: +- lna-supply : Separate supply for an LNA - enable-gpios : GPIO used to enable the device - timepulse-gpios : Time pulse GPIO diff --git a/Bindings/gnss/mediatek.txt b/Bindings/gnss/mediatek.txt new file mode 100644 index 000000000000..80cb802813c5 --- /dev/null +++ b/Bindings/gnss/mediatek.txt @@ -0,0 +1,35 @@ +Mediatek-based GNSS Receiver DT binding + +Mediatek chipsets are used in GNSS-receiver modules produced by several +vendors and can use a UART interface. + +Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic +properties. + +Required properties: + +- compatible : Must be + + "globaltop,pa6h" + +- vcc-supply : Main voltage regulator (pin name: VCC) + +Optional properties: + +- current-speed : Default UART baud rate +- gnss-fix-gpios : GPIO used to determine device position fix state + (pin name: FIX, 3D_FIX) +- reset-gpios : GPIO used to reset the device (pin name: RESET, NRESET) +- timepulse-gpios : Time pulse GPIO (pin name: PPS1, 1PPS) +- vbackup-supply : Backup voltage regulator (pin name: VBAT, VBACKUP) + +Example: + +serial@1234 { + compatible = "ns16550a"; + + gnss { + compatible = "globaltop,pa6h"; + vcc-supply = <&vcc_3v3>; + }; +}; diff --git a/Bindings/gnss/sirfstar.txt b/Bindings/gnss/sirfstar.txt index 648d183cdb77..f4252b6b660b 100644 --- a/Bindings/gnss/sirfstar.txt +++ b/Bindings/gnss/sirfstar.txt @@ -12,6 +12,7 @@ Required properties: "fastrax,uc430" "linx,r4" + "wi2wi,w2sg0004" "wi2wi,w2sg0008i" "wi2wi,w2sg0084i" diff --git a/Bindings/gpio/gateworks,pld-gpio.txt b/Bindings/gpio/gateworks,pld-gpio.txt new file mode 100644 index 000000000000..6e81f8b755c5 --- /dev/null +++ b/Bindings/gpio/gateworks,pld-gpio.txt @@ -0,0 +1,20 @@ +Gateworks PLD GPIO controller bindings + +The GPIO controller should be a child node on an I2C bus, +see: i2c/i2c.txt for details. + +Required properties: +- compatible: Should be "gateworks,pld-gpio" +- reg: I2C slave address +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be <2>. The first cell is the gpio number and + the second cell is used to specify optional parameters. + +Example: + +pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; +}; diff --git a/Bindings/gpio/gpio-eic-sprd.txt b/Bindings/gpio/gpio-eic-sprd.txt index 93d98d09d92b..54040a2bfe3a 100644 --- a/Bindings/gpio/gpio-eic-sprd.txt +++ b/Bindings/gpio/gpio-eic-sprd.txt @@ -33,7 +33,7 @@ Required properties: "sprd,sc9860-eic-latch", "sprd,sc9860-eic-async", "sprd,sc9860-eic-sync", - "sprd,sc27xx-eic". + "sprd,sc2731-eic". - reg: Define the base and range of the I/O address space containing the GPIO controller registers. - gpio-controller: Marks the device node as a GPIO controller. @@ -86,7 +86,7 @@ Example: }; pmic_eic: gpio@300 { - compatible = "sprd,sc27xx-eic"; + compatible = "sprd,sc2731-eic"; reg = <0x300>; interrupt-parent = <&sc2731_pmic>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Bindings/gpio/gpio-pca953x.txt b/Bindings/gpio/gpio-pca953x.txt index 4e3c550e319a..fb144e2b6522 100644 --- a/Bindings/gpio/gpio-pca953x.txt +++ b/Bindings/gpio/gpio-pca953x.txt @@ -16,6 +16,7 @@ Required properties: nxp,pca9574 nxp,pca9575 nxp,pca9698 + nxp,pcal6416 nxp,pcal6524 nxp,pcal9555a maxim,max7310 diff --git a/Bindings/gpio/gpio.txt b/Bindings/gpio/gpio.txt index f0ba154b5723..a8895d339bfe 100644 --- a/Bindings/gpio/gpio.txt +++ b/Bindings/gpio/gpio.txt @@ -67,6 +67,18 @@ Optional standard bitfield specifiers for the last cell: https://en.wikipedia.org/wiki/Open_collector - Bit 3: 0 means the output should be maintained during sleep/low-power mode 1 means the output state can be lost during sleep/low-power mode +- Bit 4: 0 means no pull-up resistor should be enabled + 1 means a pull-up resistor should be enabled + This setting only applies to hardware with a simple on/off + control for pull-up configuration. If the hardware has more + elaborate pull-up configuration, it should be represented + using a pin control binding. +- Bit 5: 0 means no pull-down resistor should be enabled + 1 means a pull-down resistor should be enabled + This setting only applies to hardware with a simple on/off + control for pull-down configuration. If the hardware has more + elaborate pull-down configuration, it should be represented + using a pin control binding. 1.1) GPIO specifier best practices ---------------------------------- diff --git a/Bindings/gpio/intel,ixp4xx-gpio.txt b/Bindings/gpio/intel,ixp4xx-gpio.txt new file mode 100644 index 000000000000..8dc41ed99685 --- /dev/null +++ b/Bindings/gpio/intel,ixp4xx-gpio.txt @@ -0,0 +1,38 @@ +Intel IXP4xx XScale Networking Processors GPIO + +This GPIO controller is found in the Intel IXP4xx processors. +It supports 16 GPIO lines. + +The interrupt portions of the GPIO controller is hierarchical: +the synchronous edge detector is part of the GPIO block, but the +actual enabling/disabling of the interrupt line is done in the +main IXP4xx interrupt controller which has a 1:1 mapping for +the first 12 GPIO lines to 12 system interrupts. + +The remaining 4 GPIO lines can not be used for receiving +interrupts. + +The interrupt parent of this GPIO controller must be the +IXP4xx interrupt controller. + +Required properties: + +- compatible : Should be + "intel,ixp4xx-gpio" +- reg : Should contain registers location and length +- gpio-controller : marks this as a GPIO controller +- #gpio-cells : Should be 2, see gpio/gpio.txt +- interrupt-controller : marks this as an interrupt controller +- #interrupt-cells : a standard two-cell interrupt, see + interrupt-controller/interrupts.txt + +Example: + +gpio0: gpio@c8004000 { + compatible = "intel,ixp4xx-gpio"; + reg = <0xc8004000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Bindings/gpu/arm,mali-utgard.txt b/Bindings/gpu/arm,mali-utgard.txt index 3f128e4f95c6..ae63f09fda7d 100644 --- a/Bindings/gpu/arm,mali-utgard.txt +++ b/Bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,8 @@ Required properties: + allwinner,sun8i-h3-mali + allwinner,sun50i-a64-mali + allwinner,sun50i-h5-mali + + amlogic,meson8-mali + + amlogic,meson8b-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + rockchip,rk3036-mali @@ -82,6 +84,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - amlogic,meson8-mali and amlogic,meson8b-mali + Required properties: + * resets: phandle to the reset line for the GPU + - Rockchip variants: Required properties: * resets: phandle to the reset line for the GPU diff --git a/Bindings/gpu/samsung-rotator.txt b/Bindings/gpu/samsung-rotator.txt index 82cd1ed0be93..3aca2578da0b 100644 --- a/Bindings/gpu/samsung-rotator.txt +++ b/Bindings/gpu/samsung-rotator.txt @@ -2,9 +2,10 @@ Required properties: - compatible : value should be one of the following: - (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 - (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 - (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 + * "samsung,s5pv210-rotator" for Rotator IP in S5PV210 + * "samsung,exynos4210-rotator" for Rotator IP in Exynos4210 + * "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412 + * "samsung,exynos5250-rotator" for Rotator IP in Exynos5250 - reg : Physical base address of the IP registers and length of memory mapped region. diff --git a/Bindings/hwmon/ad741x.txt b/Bindings/hwmon/ad741x.txt new file mode 100644 index 000000000000..9102152c8410 --- /dev/null +++ b/Bindings/hwmon/ad741x.txt @@ -0,0 +1,15 @@ +* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings + +Required properties: +- compatible: one of + "adi,ad7416" + "adi,ad7417" + "adi,ad7418" +- reg: I2C address + +Example: + +hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; +}; diff --git a/Bindings/hwmon/adc128d818.txt b/Bindings/hwmon/adc128d818.txt index 08bab0e94d25..d0ae46d7bac3 100644 --- a/Bindings/hwmon/adc128d818.txt +++ b/Bindings/hwmon/adc128d818.txt @@ -26,7 +26,7 @@ Required node properties: Optional node properties: - - ti,mode: Operation mode (see above). + - ti,mode: Operation mode (u8) (see above). Example (operation mode 2): @@ -34,5 +34,5 @@ Example (operation mode 2): adc128d818@1d { compatible = "ti,adc128d818"; reg = <0x1d>; - ti,mode = <2>; + ti,mode = /bits/ 8 <2>; }; diff --git a/Bindings/hwmon/dps650ab.txt b/Bindings/hwmon/dps650ab.txt new file mode 100644 index 000000000000..76780e795899 --- /dev/null +++ b/Bindings/hwmon/dps650ab.txt @@ -0,0 +1,11 @@ +Bindings for Delta Electronics DPS-650-AB power supply + +Required properties: +- compatible : "delta,dps650ab" +- reg : I2C address, one of 0x58, 0x59. + +Example: + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; diff --git a/Bindings/hwmon/hih6130.txt b/Bindings/hwmon/hih6130.txt new file mode 100644 index 000000000000..2c43837af4c2 --- /dev/null +++ b/Bindings/hwmon/hih6130.txt @@ -0,0 +1,12 @@ +Honeywell Humidicon HIH-6130 humidity/temperature sensor +-------------------------------------------------------- + +Requires node properties: +- compatible : "honeywell,hi6130" +- reg : the I2C address of the device. This is 0x27. + +Example: + hih6130@27 { + compatible = "honeywell,hih6130"; + reg = <0x27>; + }; diff --git a/Bindings/hwmon/ina3221.txt b/Bindings/hwmon/ina3221.txt index a7b25caa2b8e..fa63b6171407 100644 --- a/Bindings/hwmon/ina3221.txt +++ b/Bindings/hwmon/ina3221.txt @@ -6,6 +6,16 @@ Texas Instruments INA3221 Device Tree Bindings - reg: I2C address Optional properties: + - ti,single-shot: This chip has two power modes: single-shot (chip takes one + measurement and then shuts itself down) and continuous ( + chip takes continuous measurements). The continuous mode is + more reliable and suitable for hardware monitor type device, + but the single-shot mode is more power-friendly and useful + for battery-powered device which cares power consumptions + while still needs some measurements occasionally. + If this property is present, the single-shot mode will be + used, instead of the default continuous one for monitoring. + = The node contains optional child nodes for three channels = = Each child node describes the information of input source = diff --git a/Bindings/hwmon/lm75.txt b/Bindings/hwmon/lm75.txt new file mode 100644 index 000000000000..12d8cf7cf592 --- /dev/null +++ b/Bindings/hwmon/lm75.txt @@ -0,0 +1,37 @@ +*LM75 hwmon sensor. + +Required properties: +- compatible: manufacturer and chip name, one of + "adi,adt75", + "dallas,ds1775", + "dallas,ds75", + "dallas,ds7505", + "gmt,g751", + "national,lm75", + "national,lm75a", + "national,lm75b", + "maxim,max6625", + "maxim,max6626", + "maxim,max31725", + "maxim,max31726", + "maxim,mcp980x", + "st,stds75", + "st,stlm75", + "microchip,tcn75", + "ti,tmp100", + "ti,tmp101", + "ti,tmp105", + "ti,tmp112", + "ti,tmp175", + "ti,tmp275", + "ti,tmp75", + "ti,tmp75c", + +- reg: I2C bus address of the device + +Example: + +sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; +}; diff --git a/Bindings/hwmon/pwm-fan.txt b/Bindings/hwmon/pwm-fan.txt index c6d533202d3e..49ca5d83ed13 100644 --- a/Bindings/hwmon/pwm-fan.txt +++ b/Bindings/hwmon/pwm-fan.txt @@ -6,6 +6,9 @@ Required properties: - cooling-levels : PWM duty cycle values in a range from 0 to 255 which correspond to thermal cooling states +Optional properties: +- fan-supply : phandle to the regulator that provides power to the fan + Example: fan0: pwm-fan { compatible = "pwm-fan"; diff --git a/Bindings/i2c/i2c-iop3xx.txt b/Bindings/i2c/i2c-iop3xx.txt new file mode 100644 index 000000000000..dcc8390e0d24 --- /dev/null +++ b/Bindings/i2c/i2c-iop3xx.txt @@ -0,0 +1,20 @@ +i2c Controller on XScale platforms such as IOP3xx and IXP4xx + +Required properties: +- compatible : Must be one of + "intel,iop3xx-i2c" + "intel,ixp4xx-i2c"; +- reg +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example: + +i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_LOW>; +}; diff --git a/Bindings/i2c/i2c-mtk.txt b/Bindings/i2c/i2c-mt65xx.txt similarity index 95% rename from Bindings/i2c/i2c-mtk.txt rename to Bindings/i2c/i2c-mt65xx.txt index e199695b1c96..ee4c32454198 100644 --- a/Bindings/i2c/i2c-mtk.txt +++ b/Bindings/i2c/i2c-mt65xx.txt @@ -10,6 +10,7 @@ Required properties: "mediatek,mt6589-i2c": for MediaTek MT6589 "mediatek,mt7622-i2c": for MediaTek MT7622 "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 + "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 "mediatek,mt8173-i2c": for MediaTek MT8173 - reg: physical base address of the controller and dma base, length of memory mapped region. diff --git a/Bindings/i2c/i2c-st-ddci2c.txt b/Bindings/i2c/i2c-stu300.txt similarity index 100% rename from Bindings/i2c/i2c-st-ddci2c.txt rename to Bindings/i2c/i2c-stu300.txt diff --git a/Bindings/i2c/i2c-sunxi-p2wi.txt b/Bindings/i2c/i2c-sun6i-p2wi.txt similarity index 100% rename from Bindings/i2c/i2c-sunxi-p2wi.txt rename to Bindings/i2c/i2c-sun6i-p2wi.txt diff --git a/Bindings/i2c/i2c-vt8500.txt b/Bindings/i2c/i2c-wmt.txt similarity index 100% rename from Bindings/i2c/i2c-vt8500.txt rename to Bindings/i2c/i2c-wmt.txt diff --git a/Bindings/iio/accel/mma8452.txt b/Bindings/iio/accel/mma8452.txt index 2100e9af379c..e132394375a1 100644 --- a/Bindings/iio/accel/mma8452.txt +++ b/Bindings/iio/accel/mma8452.txt @@ -20,6 +20,10 @@ Optional properties: - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's interrupt line in use. + - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer. + + - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer. + Example: mma8453fc@1d { diff --git a/Bindings/iio/adc/adi,ad7606.txt b/Bindings/iio/adc/adi,ad7606.txt new file mode 100644 index 000000000000..d7b6241ca881 --- /dev/null +++ b/Bindings/iio/adc/adi,ad7606.txt @@ -0,0 +1,65 @@ +Analog Devices AD7606 Simultaneous Sampling ADC + +Required properties for the AD7606: + +- compatible: Must be one of + * "adi,ad7605-4" + * "adi,ad7606-8" + * "adi,ad7606-6" + * "adi,ad7606-4" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt +- avcc-supply: phandle to the Avcc power supply +- interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + +Optional properties: + +- reset-gpios: must be the device tree identifier of the RESET pin. If specified, + it will be asserted during driver probe. As the line is active high, + it should be marked GPIO_ACTIVE_HIGH. +- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used + to place the AD7606 into one of two power-down modes, Standby mode or + Shutdown mode. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. +- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin. + The FRSTDATA output indicates when the first channel, V1, is + being read back on either the parallel, byte or serial interface. + As the line is active high, it should be marked GPIO_ACTIVE_HIGH. +- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on + this pin determines the input range of the analog input channels. If + this pin is tied to a logic high, the analog input range is ±10V for + all channels. If this pin is tied to a logic low, the analog input range + is ±5V for all channels. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. +- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling + mode pins. As the line is active high, it should be marked + GPIO_ACTIVE_HIGH. + +Example: + + adc@0 { + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH + &gpio 23 GPIO_ACTIVE_HIGH + &gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; diff --git a/Bindings/iio/adc/adi,ad7768-1.txt b/Bindings/iio/adc/adi,ad7768-1.txt new file mode 100644 index 000000000000..9f5b88cf680d --- /dev/null +++ b/Bindings/iio/adc/adi,ad7768-1.txt @@ -0,0 +1,41 @@ +Analog Devices AD7768-1 ADC device driver + +Required properties for the AD7768-1: + +- compatible: Must be "adi,ad7768-1" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: Must be "mclk". +- interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- vref-supply: vref supply can be used as reference for conversion +- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables + synchronization of multiple devices that require simultaneous sampling. + A pulse is always required if the configuration is changed in any way, for example + if the filter decimation rate changes. As the line is active low, it should + be marked GPIO_ACTIVE_LOW. + +Optional properties: + + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + +Example: + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; diff --git a/Bindings/iio/adc/amlogic,meson-saradc.txt b/Bindings/iio/adc/amlogic,meson-saradc.txt index 325090e43ce6..75c775954102 100644 --- a/Bindings/iio/adc/amlogic,meson-saradc.txt +++ b/Bindings/iio/adc/amlogic,meson-saradc.txt @@ -23,6 +23,10 @@ Required properties: - #io-channel-cells: must be 1, see ../iio-bindings.txt Optional properties: +- amlogic,hhi-sysctrl: phandle to the syscon which contains the 5th bit + of the TSC (temperature sensor coefficient) on + Meson8b and Meson8m2 (which used to calibrate the + temperature sensor) - nvmem-cells: phandle to the temperature_calib eFuse cells - nvmem-cell-names: if present (to enable the temperature sensor calibration) this must contain "temperature_calib" diff --git a/Bindings/iio/adc/ingenic,adc.txt b/Bindings/iio/adc/ingenic,adc.txt new file mode 100644 index 000000000000..f01159f20d87 --- /dev/null +++ b/Bindings/iio/adc/ingenic,adc.txt @@ -0,0 +1,48 @@ +* Ingenic JZ47xx ADC controller IIO bindings + +Required properties: + +- compatible: Should be one of: + * ingenic,jz4725b-adc + * ingenic,jz4740-adc +- reg: ADC controller registers location and length. +- clocks: phandle to the SoC's ADC clock. +- clock-names: Must be set to "adc". +- #io-channel-cells: Must be set to <1> to indicate channels are selected + by index. + +ADC clients must use the format described in iio-bindings.txt, giving +a phandle and IIO specifier pair ("io-channels") to the ADC controller. + +Example: + +#include + +adc: adc@10070000 { + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; + + reg = <0x10070000 0x30>; + + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; + + interrupt-parent = <&intc>; + interrupts = <18>; +}; + +adc-keys { + ... + compatible = "adc-keys"; + io-channels = <&adc INGENIC_ADC_AUX>; + io-channel-names = "buttons"; + ... +}; + +battery { + ... + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + ... +}; diff --git a/Bindings/staging/iio/adc/lpc32xx-adc.txt b/Bindings/iio/adc/lpc32xx-adc.txt similarity index 100% rename from Bindings/staging/iio/adc/lpc32xx-adc.txt rename to Bindings/iio/adc/lpc32xx-adc.txt diff --git a/Bindings/iio/adc/nuvoton,npcm-adc.txt b/Bindings/iio/adc/nuvoton,npcm-adc.txt new file mode 100644 index 000000000000..eb939fe77836 --- /dev/null +++ b/Bindings/iio/adc/nuvoton,npcm-adc.txt @@ -0,0 +1,24 @@ +Nuvoton NPCM Analog to Digital Converter (ADC) + +The NPCM ADC is a 10-bit converter for eight channel inputs. + +Required properties: +- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC. +- reg: specifies physical base address and size of the registers. +- interrupts: Contain the ADC interrupt with flags for falling edge. + +Optional properties: +- clocks: phandle of ADC reference clock, in case the clock is not + added the ADC will use the default ADC sample rate. +- vref-supply: The regulator supply ADC reference voltage, in case the + vref-supply is not added the ADC will use internal voltage + reference. + +Example: + +adc: adc@f000c000 { + compatible = "nuvoton,npcm750-adc"; + reg = <0xf000c000 0x8>; + interrupts = ; + clocks = <&clk NPCM7XX_CLK_ADC>; +}; diff --git a/Bindings/iio/adc/samsung,exynos-adc.txt b/Bindings/iio/adc/samsung,exynos-adc.txt index a10c1f89037d..e1fe02f3e3e9 100644 --- a/Bindings/iio/adc/samsung,exynos-adc.txt +++ b/Bindings/iio/adc/samsung,exynos-adc.txt @@ -11,11 +11,13 @@ New driver handles the following Required properties: - compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 controllers. + for Exynos5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. Must be "samsung,exynos3250-adc" for controllers compatible with ADC of Exynos3250. + Must be "samsung,exynos4212-adc" for + controllers compatible with ADC of Exynos4212 and Exynos4412. Must be "samsung,exynos7-adc" for the ADC in Exynos7 and compatibles Must be "samsung,s3c2410-adc" for diff --git a/Bindings/iio/adc/stmpe-adc.txt b/Bindings/iio/adc/stmpe-adc.txt new file mode 100644 index 000000000000..480e66422625 --- /dev/null +++ b/Bindings/iio/adc/stmpe-adc.txt @@ -0,0 +1,21 @@ +STMPE ADC driver +---------------- + +Required properties: + - compatible: "st,stmpe-adc" + +Optional properties: +Note that the ADC is shared with the STMPE touchscreen. ADC related settings +have to be done in the mfd. +- st,norequest-mask: bitmask specifying which ADC channels should _not_ be + requestable due to different usage (e.g. touch) + +Node name must be stmpe_adc and should be child node of stmpe node to +which it belongs. + +Example: + + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ + }; diff --git a/Bindings/iio/adc/ti-ads124s08.txt b/Bindings/iio/adc/ti-ads124s08.txt new file mode 100644 index 000000000000..ecf807bb32f7 --- /dev/null +++ b/Bindings/iio/adc/ti-ads124s08.txt @@ -0,0 +1,25 @@ +* Texas Instruments' ads124s08 and ads124s06 ADC chip + +Required properties: + - compatible : + "ti,ads124s08" + "ti,ads124s06" + - reg : spi chip select number for the device + +Recommended properties: + - spi-max-frequency : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - spi-cpha : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - reset-gpios : GPIO pin used to reset the device. + +Example: +adc@0 { + compatible = "ti,ads124s08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +}; diff --git a/Bindings/iio/chemical/bme680.txt b/Bindings/iio/chemical/bme680.txt new file mode 100644 index 000000000000..7f3827cfb2ff --- /dev/null +++ b/Bindings/iio/chemical/bme680.txt @@ -0,0 +1,11 @@ +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors + +Required properties: +- compatible: must be "bosch,bme680" + +Example: + +bme680@76 { + compatible = "bosch,bme680"; + reg = <0x76>; +}; diff --git a/Bindings/iio/chemical/plantower,pms7003.txt b/Bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 000000000000..7b5f06f324c8 --- /dev/null +++ b/Bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,20 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" +- vcc-supply: phandle to the regulator that provides power to the sensor + +Optional properties: +- plantower,set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; +}; diff --git a/Bindings/iio/chemical/sensirion,sgp30.txt b/Bindings/iio/chemical/sensirion,sgp30.txt new file mode 100644 index 000000000000..5844ed58173c --- /dev/null +++ b/Bindings/iio/chemical/sensirion,sgp30.txt @@ -0,0 +1,15 @@ +* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor + +Required properties: + + - compatible: must be one of + "sensirion,sgp30" + "sensirion,sgpc3" + - reg: the I2C address of the sensor + +Example: + +gas@58 { + compatible = "sensirion,sgp30"; + reg = <0x58>; +}; diff --git a/Bindings/iio/chemical/sensirion,sps30.txt b/Bindings/iio/chemical/sensirion,sps30.txt new file mode 100644 index 000000000000..6eee2709b5b6 --- /dev/null +++ b/Bindings/iio/chemical/sensirion,sps30.txt @@ -0,0 +1,12 @@ +* Sensirion SPS30 particulate matter sensor + +Required properties: +- compatible: must be "sensirion,sps30" +- reg: the I2C address of the sensor + +Example: + +sps30@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; +}; diff --git a/Bindings/iio/dac/ti,dac7612.txt b/Bindings/iio/dac/ti,dac7612.txt new file mode 100644 index 000000000000..639c94ed83e9 --- /dev/null +++ b/Bindings/iio/dac/ti,dac7612.txt @@ -0,0 +1,28 @@ +* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter + +The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed +12-bit monotonicity performance over the industrial temperature range. +Is is programmable through an SPI interface. + +The internal DACs are loaded when the LOADDACS pin is pulled down. + +http://www.ti.com/lit/ds/sbas106/sbas106.pdf + +Required Properties: +- compatible: Should be one of: + "ti,dac7612" + "ti,dac7612u" + "ti,dac7612ub" +- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional Properties: +- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin. +- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + + dac@1 { + compatible = "ti,dac7612"; + reg = <0x1>; + ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + }; diff --git a/Bindings/iio/impedance-analyzer/ad5933.txt b/Bindings/iio/impedance-analyzer/ad5933.txt new file mode 100644 index 000000000000..5ff38728ff91 --- /dev/null +++ b/Bindings/iio/impedance-analyzer/ad5933.txt @@ -0,0 +1,26 @@ +Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer + +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf +https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf + +Required properties: + - compatible : should be one of + "adi,ad5933" + "adi,ad5934" + - reg : the I2C address. + - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they + are connected together. + +Optional properties: +- clocks : external clock reference. +- clock-names : must be "mclk" if clocks is set. + +Example for a I2C device node: + + impedance-analyzer@0d { + compatible = "adi,adxl345"; + reg = <0x0d>; + vdd-supply = <&vdd_supply>; + clocks = <&ref_clk>; + clock-names = "mclk"; + }; diff --git a/Bindings/iio/imu/bmi160.txt b/Bindings/iio/imu/bmi160.txt index 0c1c105fb503..900c169de00f 100644 --- a/Bindings/iio/imu/bmi160.txt +++ b/Bindings/iio/imu/bmi160.txt @@ -9,9 +9,11 @@ Required properties: - spi-max-frequency : set maximum clock frequency (only for SPI) Optional properties: - - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW + - interrupts : interrupt mapping for IRQ - interrupt-names : set to "INT1" if INT1 pin should be used as interrupt input, set to "INT2" if INT2 pin should be used instead + - drive-open-drain : set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. Examples: @@ -20,7 +22,7 @@ bmi160@68 { reg = <0x68>; interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; interrupt-names = "INT1"; }; diff --git a/Bindings/iio/imu/inv_mpu6050.txt b/Bindings/iio/imu/inv_mpu6050.txt index 6ab9a9d196b0..268bf7568e19 100644 --- a/Bindings/iio/imu/inv_mpu6050.txt +++ b/Bindings/iio/imu/inv_mpu6050.txt @@ -11,6 +11,7 @@ Required properties: "invensense,mpu9250" "invensense,mpu9255" "invensense,icm20608" + "invensense,icm20602" - reg : the I2C address of the sensor - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or diff --git a/Bindings/iio/light/max44009.txt b/Bindings/iio/light/max44009.txt new file mode 100644 index 000000000000..4a98848e35c0 --- /dev/null +++ b/Bindings/iio/light/max44009.txt @@ -0,0 +1,24 @@ +* MAX44009 Ambient Light Sensor + +Required properties: + +- compatible: should be "maxim,max44009" +- reg: the I2C address of the device (default is <0x4a>) + +Optional properties: + +- interrupts: interrupt mapping for GPIO IRQ. Should be configured with + IRQ_TYPE_EDGE_FALLING. + +Refer to interrupt-controller/interrupts.txt for generic interrupt client +node bindings. + +Example: + +light-sensor@4a { + compatible = "maxim,max44009"; + reg = <0x4a>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Bindings/iio/st-sensors.txt b/Bindings/iio/st-sensors.txt index ddcb95509599..52ee4baec6f0 100644 --- a/Bindings/iio/st-sensors.txt +++ b/Bindings/iio/st-sensors.txt @@ -77,3 +77,4 @@ Pressure sensors: - st,lps22hb-press - st,lps33hw - st,lps35hw +- st,lps22hh diff --git a/Bindings/input/cypress,tm2-touchkey.txt b/Bindings/input/cypress,tm2-touchkey.txt index 0c252d9306da..ef2ae729718f 100644 --- a/Bindings/input/cypress,tm2-touchkey.txt +++ b/Bindings/input/cypress,tm2-touchkey.txt @@ -1,13 +1,19 @@ Samsung tm2-touchkey Required properties: -- compatible: must be "cypress,tm2-touchkey" +- compatible: + * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board + * "cypress,midas-touchkey" - for the touchkey found on midas boards + * "cypress,aries-touchkey" - for the touchkey found on aries boards - reg: I2C address of the chip. - interrupts: interrupt to which the chip is connected (see interrupt binding[0]). - vcc-supply : internal regulator output. 1.8V - vdd-supply : power supply for IC 3.3V +Optional properties: +- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK + [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -21,5 +27,6 @@ Example: interrupts = <2 IRQ_TYPE_EDGE_FALLING>; vcc-supply=<&ldo32_reg>; vdd-supply=<&ldo33_reg>; + linux,keycodes = ; }; }; diff --git a/Bindings/input/ilitek,ili2xxx.txt b/Bindings/input/ilitek,ili2xxx.txt new file mode 100644 index 000000000000..b2a76301e632 --- /dev/null +++ b/Bindings/input/ilitek,ili2xxx.txt @@ -0,0 +1,25 @@ +Ilitek ILI210x/ILI251x touchscreen controller + +Required properties: +- compatible: + ilitek,ili210x for ILI210x + ilitek,ili251x for ILI251x + +- reg: The I2C address of the device + +- interrupts: The sink for the touchscreen's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) + +Example: + + touchscreen@41 { + compatible = "ilitek,ili251x"; + reg = <0x41>; + interrupt-parent = <&gpio4>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; diff --git a/Bindings/input/msm-vibrator.txt b/Bindings/input/msm-vibrator.txt new file mode 100644 index 000000000000..8dcf014ef2e5 --- /dev/null +++ b/Bindings/input/msm-vibrator.txt @@ -0,0 +1,36 @@ +* Device tree bindings for the Qualcomm MSM vibrator + +Required properties: + + - compatible: Should be one of + "qcom,msm8226-vibrator" + "qcom,msm8974-vibrator" + - reg: the base address and length of the IO memory for the registers. + - pinctrl-names: set to default. + - pinctrl-0: phandles pointing to pin configuration nodes. See + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + - clock-names: set to pwm + - clocks: phandle of the clock. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + - enable-gpios: GPIO that enables the vibrator. + +Optional properties: + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example from a LG Nexus 5 (hammerhead) phone: + +vibrator@fd8c3450 { + reg = <0xfd8c3450 0x400>; + compatible = "qcom,msm8974-vibrator"; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; +}; diff --git a/Bindings/input/st,stpmic1-onkey.txt b/Bindings/input/st,stpmic1-onkey.txt new file mode 100644 index 000000000000..4494613ae7ad --- /dev/null +++ b/Bindings/input/st,stpmic1-onkey.txt @@ -0,0 +1,28 @@ +STMicroelectronics STPMIC1 Onkey + +Required properties: + +- compatible = "st,stpmic1-onkey"; +- interrupts: interrupt line to use +- interrupt-names = "onkey-falling", "onkey-rising" + onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic + onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic + +Optional properties: + +- st,onkey-clear-cc-flag: onkey is able power on after an + over-current shutdown event. +- st,onkey-pu-inactive: onkey pull up is not active +- power-off-time-sec: Duration in seconds which the key should be kept + pressed for device to power off automatically (from 1 to 16 seconds). + see See Documentation/devicetree/bindings/input/keys.txt + +Example: + +onkey { + compatible = "st,stpmic1-onkey"; + interrupt-parent = <&pmic>; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; +}; diff --git a/Bindings/input/touchscreen/edt-ft5x06.txt b/Bindings/input/touchscreen/edt-ft5x06.txt index da2dc5d6c98b..870b8c5cce9b 100644 --- a/Bindings/input/touchscreen/edt-ft5x06.txt +++ b/Bindings/input/touchscreen/edt-ft5x06.txt @@ -1,11 +1,12 @@ FocalTech EDT-FT5x06 Polytouch driver ===================================== -There are 3 variants of the chip for various touch panel sizes +There are 5 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" FT5506EEG 7" .. 8.9" +FT5726NEI 5.7” .. 11.6" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -19,6 +20,7 @@ Required properties: or: "edt,edt-ft5306" or: "edt,edt-ft5406" or: "edt,edt-ft5506" + or: "evervision,ev-ft5726" or: "focaltech,ft6236" - reg: I2C slave address of the chip (0x38) @@ -42,6 +44,15 @@ Optional properties: - offset: allows setting the edge compensation in the range from 0 to 31. + + - offset-x: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + + - offset-y: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 + devices. + - touchscreen-size-x : See touchscreen.txt - touchscreen-size-y : See touchscreen.txt - touchscreen-fuzz-x : See touchscreen.txt diff --git a/Bindings/input/touchscreen/goodix.txt b/Bindings/input/touchscreen/goodix.txt index f7e95c52f3c7..8cf0b4d38a7e 100644 --- a/Bindings/input/touchscreen/goodix.txt +++ b/Bindings/input/touchscreen/goodix.txt @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - compatible : Should be "goodix,gt1151" + or "goodix,gt5688" or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" @@ -18,11 +19,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) +The touchscreen-* properties are documented in touchscreen.txt in this +directory. Example: diff --git a/Bindings/input/touchscreen/sitronix-st1232.txt b/Bindings/input/touchscreen/sitronix-st1232.txt index 64ad48b824a2..019373253b28 100644 --- a/Bindings/input/touchscreen/sitronix-st1232.txt +++ b/Bindings/input/touchscreen/sitronix-st1232.txt @@ -1,13 +1,17 @@ -* Sitronix st1232 touchscreen controller +* Sitronix st1232 or st1633 touchscreen controller Required properties: -- compatible: must be "sitronix,st1232" +- compatible: must contain one of + * "sitronix,st1232" + * "sitronix,st1633" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected Optional properties: - gpios: a phandle to the reset GPIO +For additional optional properties see: touchscreen.txt + Example: i2c@00000000 { diff --git a/Bindings/input/touchscreen/stmpe.txt b/Bindings/input/touchscreen/stmpe.txt index 127baa31a77a..c549924603d2 100644 --- a/Bindings/input/touchscreen/stmpe.txt +++ b/Bindings/input/touchscreen/stmpe.txt @@ -5,39 +5,105 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 -> - 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6 - -> 144 clocks), recommended is 4. -- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) -- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external - reference) -- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) -- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 - samples, 3 -> 8 samples) -- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 -> - 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended - is 3 -- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 - -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2 -- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of - the fractional part) recommended is 7 -- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35 - mA max, 1 -> 50 mA typical 80 mA max) +- st,ave-ctrl : Sample average control + 0 -> 1 sample + 1 -> 2 samples + 2 -> 4 samples + 3 -> 8 samples +- st,touch-det-delay : Touch detect interrupt delay (recommended is 3) + 0 -> 10 us + 1 -> 50 us + 2 -> 100 us + 3 -> 500 us + 4 -> 1 ms + 5 -> 5 ms + 6 -> 10 ms + 7 -> 50 ms +- st,settling : Panel driver settling time (recommended is 2) + 0 -> 10 us + 1 -> 100 us + 2 -> 500 us + 3 -> 1 ms + 4 -> 5 ms + 5 -> 10 ms + 6 -> 50 ms + 7 -> 100 ms +- st,fraction-z : Length of the fractional part in z (recommended is 7) + (fraction-z ([0..7]) = Count of the fractional part) +- st,i-drive : current limit value of the touchscreen drivers + 0 -> 20 mA (typical 35mA max) + 1 -> 50 mA (typical 80 mA max) + +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; diff --git a/Bindings/input/touchscreen/sx8654.txt b/Bindings/input/touchscreen/sx8654.txt index 4886c4aa2906..0ebe6dd043c7 100644 --- a/Bindings/input/touchscreen/sx8654.txt +++ b/Bindings/input/touchscreen/sx8654.txt @@ -1,10 +1,17 @@ * Semtech SX8654 I2C Touchscreen Controller Required properties: -- compatible: must be "semtech,sx8654" +- compatible: must be one of the following, depending on the model: + "semtech,sx8650" + "semtech,sx8654" + "semtech,sx8655" + "semtech,sx8656" - reg: i2c slave address - interrupts: touch controller interrupt +Optional properties: + - reset-gpios: GPIO specification for the NRST input + Example: sx8654@48 { @@ -12,4 +19,5 @@ Example: reg = <0x48>; interrupt-parent = <&gpio6>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; }; diff --git a/Bindings/input/touchscreen/ti-tsc-adc.txt b/Bindings/input/touchscreen/ti-tsc-adc.txt index b1163bf97146..aad5e34965eb 100644 --- a/Bindings/input/touchscreen/ti-tsc-adc.txt +++ b/Bindings/input/touchscreen/ti-tsc-adc.txt @@ -2,7 +2,12 @@ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Required properties: +- mfd + compatible: Should be + "ti,am3359-tscadc" for AM335x/AM437x SoCs + "ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs - child "tsc" + compatible: Should be "ti,am3359-tsc". ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen support on the platform. ti,x-plate-resistance: X plate resistance @@ -25,6 +30,9 @@ Required properties: AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3. - child "adc" + compatible: Should be + "ti,am3359-adc" for AM335x/AM437x SoCs + "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs ti,adc-channels: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7. diff --git a/Bindings/interconnect/interconnect.txt b/Bindings/interconnect/interconnect.txt new file mode 100644 index 000000000000..5a3c575b387a --- /dev/null +++ b/Bindings/interconnect/interconnect.txt @@ -0,0 +1,60 @@ +Interconnect Provider Device Tree Bindings +========================================= + +The purpose of this document is to define a common set of generic interconnect +providers/consumers properties. + + += interconnect providers = + +The interconnect provider binding is intended to represent the interconnect +controllers in the system. Each provider registers a set of interconnect +nodes, which expose the interconnect related capabilities of the interconnect +to consumer drivers. These capabilities can be throughput, latency, priority +etc. The consumer drivers set constraints on interconnect path (or endpoints) +depending on the use case. Interconnect providers can also be interconnect +consumers, such as in the case where two network-on-chip fabrics interface +directly. + +Required properties: +- compatible : contains the interconnect provider compatible string +- #interconnect-cells : number of cells in a interconnect specifier needed to + encode the interconnect node id + +Example: + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + #interconnect-cells = <1>; + reg = <0x580000 0x14000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + += interconnect consumers = + +The interconnect consumers are device nodes which dynamically express their +bandwidth requirements along interconnect paths they are connected to. There +can be multiple interconnect providers on a SoC and the consumer may consume +multiple paths from different providers depending on use case and the +components it has to interact with. + +Required properties: +interconnects : Pairs of phandles and interconnect provider specifier to denote + the edge source and destination ports of the interconnect path. + +Optional properties: +interconnect-names : List of interconnect path name strings sorted in the same + order as the interconnects property. Consumers drivers will use + interconnect-names to match interconnect paths with interconnect + specifier pairs. + +Example: + + sdhci@7864000 { + ... + interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "sdhc-mem"; + }; diff --git a/Bindings/interconnect/qcom,sdm845.txt b/Bindings/interconnect/qcom,sdm845.txt new file mode 100644 index 000000000000..5c4f1d911630 --- /dev/null +++ b/Bindings/interconnect/qcom,sdm845.txt @@ -0,0 +1,24 @@ +Qualcomm SDM845 Network-On-Chip interconnect driver binding +----------------------------------------------------------- + +SDM845 interconnect providers support system bandwidth requirements through +RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is +able to communicate with the BCM through the Resource State Coordinator (RSC) +associated with each execution environment. Provider nodes must reside within +an RPMh device node pertaining to their RSC and each provider maps to a single +RPMh resource. + +Required properties : +- compatible : shall contain only one of the following: + "qcom,sdm845-rsc-hlos" +- #interconnect-cells : should contain 1 + +Examples: + +apps_rsc: rsc { + rsc_hlos: interconnect { + compatible = "qcom,sdm845-rsc-hlos"; + #interconnect-cells = <1>; + }; +}; + diff --git a/Bindings/interrupt-controller/arm,gic-v3.txt b/Bindings/interrupt-controller/arm,gic-v3.txt deleted file mode 100644 index a3be5298a5eb..000000000000 --- a/Bindings/interrupt-controller/arm,gic-v3.txt +++ /dev/null @@ -1,175 +0,0 @@ -* ARM Generic Interrupt Controller, version 3 - -AArch64 SMP cores are often associated with a GICv3, providing Private -Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), -Software Generated Interrupts (SGI), and Locality-specific Peripheral -Interrupts (LPI). - -Main node required properties: - -- compatible : should at least contain "arm,gic-v3" or either - "qcom,msm8996-gic-v3", "arm,gic-v3" for msm8996 SoCs - to address SoC specific bugs/quirks -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. Must be a single cell with a value of at least 3. - If the system requires describing PPI affinity, then the value must - be at least 4. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. Other values are reserved for future use. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = edge triggered - 4 = level triggered - - The 4th cell is a phandle to a node describing a set of CPUs this - interrupt is affine to. The interrupt must be a PPI, and the node - pointed must be a subnode of the "ppi-partitions" subnode. For - interrupt types other than PPI or PPIs that are not partitionned, - this cell must be zero. See the "ppi-partitions" node description - below. - - Cells 5 and beyond are reserved for future use and must have a value - of 0 if present. - -- reg : Specifies base physical address(s) and size of the GIC - registers, in the following order: - - GIC Distributor interface (GICD) - - GIC Redistributors (GICR), one range per redistributor region - - GIC CPU interface (GICC) - - GIC Hypervisor interface (GICH) - - GIC Virtual CPU interface (GICV) - - GICC, GICH and GICV are optional. - -- interrupts : Interrupt source of the VGIC maintenance interrupt. - -Optional - -- redistributor-stride : If using padding pages, specifies the stride - of consecutive redistributors. Must be a multiple of 64kB. - -- #redistributor-regions: The number of independent contiguous regions - occupied by the redistributors. Required if more than one such - region is present. - -- msi-controller: Boolean property. Identifies the node as an MSI - controller. Only present if the Message Based Interrupt - functionnality is being exposed by the HW, and the mbi-ranges - property present. - -- mbi-ranges: A list of pairs , where "intid" is the first - SPI of a range that can be used an MBI, and "span" the size of that - range. Multiple ranges can be provided. Requires "msi-controller" to - be set. - -- mbi-alias: Address property. Base address of an alias of the GICD - region containing only the {SET,CLR}SPI registers to be used if - isolation is required, and if supported by the HW. - -Sub-nodes: - -PPI affinity can be expressed as a single "ppi-partitions" node, -containing a set of sub-nodes, each with the following property: -- affinity: Should be a list of phandles to CPU nodes (as described in - Documentation/devicetree/bindings/arm/cpus.yaml). - -GICv3 has one or more Interrupt Translation Services (ITS) that are -used to route Message Signalled Interrupts (MSI) to the CPUs. - -These nodes must have the following properties: -- compatible : Should at least contain "arm,gic-v3-its". -- msi-controller : Boolean property. Identifies the node as an MSI controller -- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device - which will generate the MSI. -- reg: Specifies the base physical address and size of the ITS - registers. - -Optional: -- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated - address and size of the pre-ITS window. - -The main GIC node must contain the appropriate #address-cells, -#size-cells and ranges properties for the reg property of all ITS -nodes. - -Examples: - - gic: interrupt-controller@2cf00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - reg = <0x0 0x2f000000 0 0x10000>, // GICD - <0x0 0x2f100000 0 0x200000>, // GICR - <0x0 0x2c000000 0 0x2000>, // GICC - <0x0 0x2c010000 0 0x2000>, // GICH - <0x0 0x2c020000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - msi-controller; - mbi-ranges = <256 128>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x20000>; - }; - }; - - gic: interrupt-controller@2c010000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - redistributor-stride = <0x0 0x40000>; // 256kB stride - #redistributor-regions = <2>; - reg = <0x0 0x2c010000 0 0x10000>, // GICD - <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 - <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 - <0x0 0x2c040000 0 0x2000>, // GICC - <0x0 0x2c060000 0 0x2000>, // GICH - <0x0 0x2c080000 0 0x2000>; // GICV - interrupts = <1 9 4>; - - gic-its@2c200000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x20000>; - }; - - gic-its@2c400000 { - compatible = "arm,gic-v3-its"; - msi-controller; - #msi-cells = <1>; - reg = <0x0 0x2c400000 0 0x20000>; - }; - - ppi-partitions { - part0: interrupt-partition-0 { - affinity = <&cpu0 &cpu2>; - }; - - part1: interrupt-partition-1 { - affinity = <&cpu1 &cpu3>; - }; - }; - }; - - - device@0 { - reg = <0 0 0 4>; - interrupts = <1 1 4 &part0>; - }; diff --git a/Bindings/interrupt-controller/arm,gic-v3.yaml b/Bindings/interrupt-controller/arm,gic-v3.yaml new file mode 100644 index 000000000000..c34df35a25fc --- /dev/null +++ b/Bindings/interrupt-controller/arm,gic-v3.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller, version 3 + +maintainers: + - Marc Zyngier + +description: | + AArch64 SMP cores are often associated with a GICv3, providing Private + Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), + Software Generated Interrupts (SGI), and Locality-specific Peripheral + Interrupts (LPI). + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,msm8996-gic-v3 + - const: arm,gic-v3 + - const: arm,gic-v3 + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1, 2 ] + "#size-cells": + enum: [ 1, 2 ] + + ranges: true + + "#interrupt-cells": + description: | + Specifies the number of cells needed to encode an interrupt source. + Must be a single cell with a value of at least 3. + If the system requires describing PPI affinity, then the value must + be at least 4. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + The 4th cell is a phandle to a node describing a set of CPUs this + interrupt is affine to. The interrupt must be a PPI, and the node + pointed must be a subnode of the "ppi-partitions" subnode. For + interrupt types other than PPI or PPIs that are not partitionned, + this cell must be zero. See the "ppi-partitions" node description + below. + + Cells 5 and beyond are reserved for future use and must have a value + of 0 if present. + enum: [ 3, 4 ] + + reg: + description: | + Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + minItems: 2 + maxItems: 4096 # Should be enough? + + interrupts: + description: + Interrupt source of the VGIC maintenance interrupt. + maxItems: 1 + + redistributor-stride: + description: + If using padding pages, specifies the stride of consecutive + redistributors. Must be a multiple of 64kB. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint64 + - multipleOf: 0x10000 + exclusiveMinimum: 0 + + "#redistributor-regions": + description: + The number of independent contiguous regions occupied by the + redistributors. Required if more than one such region is present. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 4096 # Should be enough? + + msi-controller: + description: + Only present if the Message Based Interrupt functionnality is + being exposed by the HW, and the mbi-ranges property present. + + mbi-ranges: + description: + A list of pairs , where "intid" is the first SPI of a range + that can be used an MBI, and "span" the size of that range. Multiple + ranges can be provided. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-matrix + - items: + minItems: 2 + maxItems: 2 + + mbi-alias: + description: + Address property. Base address of an alias of the GICD region containing + only the {SET,CLR}SPI registers to be used if isolation is required, + and if supported by the HW. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 1 + maxItems: 2 + + ppi-partitions: + type: object + description: + PPI affinity can be expressed as a single "ppi-partitions" node, + containing a set of sub-nodes. + patternProperties: + "^interrupt-partition-[0-9]+$": + properties: + affinity: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be a list of phandles to CPU nodes (as described in + Documentation/devicetree/bindings/arm/cpus.yaml). + + required: + - affinity + +dependencies: + mbi-ranges: [ msi-controller ] + msi-controller: [ mbi-ranges ] + +required: + - compatible + - interrupts + - reg + +patternProperties: + "^gic-its@": false + "^interrupt-controller@[0-9a-f]+$": false + # msi-controller is preferred, but allow other names + "^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$": + type: object + description: + GICv3 has one or more Interrupt Translation Services (ITS) that are + used to route Message Signalled Interrupts (MSI) to the CPUs. + properties: + compatible: + const: arm,gic-v3-its + + msi-controller: true + + "#msi-cells": + description: + The single msi-cell is the DeviceID of the device which will generate + the MSI. + const: 1 + + reg: + description: + Specifies the base physical address and size of the ITS registers. + maxItems: 1 + + socionext,synquacer-pre-its: + description: + (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minItems: 2 + maxItems: 2 + + required: + - compatible + - msi-controller + - "#msi-cells" + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x2f000000 0x10000>, // GICD + <0x2f100000 0x200000>, // GICR + <0x2c000000 0x2000>, // GICC + <0x2c010000 0x2000>, // GICH + <0x2c020000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller; + mbi-ranges = <256 128>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + }; + + interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x2c010000 0x10000>, // GICD + <0x2d000000 0x800000>, // GICR 1: CPUs 0-31 + <0x2e000000 0x800000>, // GICR 2: CPUs 32-63 + <0x2c040000 0x2000>, // GICC + <0x2c060000 0x2000>, // GICH + <0x2c080000 0x2000>; // GICV + interrupts = <1 9 4>; + + msi-controller@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c200000 0x20000>; + }; + + msi-controller@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x2c400000 0x20000>; + }; + + ppi-partitions { + part0: interrupt-partition-0 { + affinity = <&cpu0 &cpu2>; + }; + + part1: interrupt-partition-1 { + affinity = <&cpu1 &cpu3>; + }; + }; + }; + + + device@0 { + reg = <0 4>; + interrupts = <1 1 4 &part0>; + }; + +... diff --git a/Bindings/interrupt-controller/arm,gic.txt b/Bindings/interrupt-controller/arm,gic.txt deleted file mode 100644 index 2f3244648646..000000000000 --- a/Bindings/interrupt-controller/arm,gic.txt +++ /dev/null @@ -1,171 +0,0 @@ -* ARM Generic Interrupt Controller - -ARM SMP cores are often associated with a GIC, providing per processor -interrupts (PPI), shared processor interrupts (SPI) and software -generated interrupts (SGI). - -Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. -Secondary GICs are cascaded into the upward interrupt controller and do not -have PPIs or SGIs. - -Main node required properties: - -- compatible : should be one of: - "arm,arm1176jzf-devchip-gic" - "arm,arm11mp-gic" - "arm,cortex-a15-gic" - "arm,cortex-a7-gic" - "arm,cortex-a9-gic" - "arm,eb11mp-gic" - "arm,gic-400" - "arm,pl390" - "arm,tc11mp-gic" - "brcm,brahma-b15-gic" - "nvidia,tegra210-agic" - "qcom,msm-8660-qgic" - "qcom,msm-qgic2" -- interrupt-controller : Identifies the node as an interrupt controller -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The type shall be a and the value shall be 3. - - The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI - interrupts. - - The 2nd cell contains the interrupt number for the interrupt type. - SPI interrupts are in the range [0-987]. PPI interrupts are in the - range [0-15]. - - The 3rd cell is the flags, encoded as follows: - bits[3:0] trigger type and level flags. - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered (invalid for SPIs) - 4 = active high level-sensitive - 8 = active low level-sensitive (invalid for SPIs). - bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of - the 8 possible cpus attached to the GIC. A bit set to '1' indicated - the interrupt is wired to that CPU. Only valid for PPI interrupts. - Also note that the configurability of PPI interrupts is IMPLEMENTATION - DEFINED and as such not guaranteed to be present (most SoC available - in 2014 seem to ignore the setting of this flag and use the hardware - default value). - -- reg : Specifies base physical address(s) and size of the GIC registers. The - first region is the GIC distributor register base and size. The 2nd region is - the GIC cpu interface register base and size. - -Optional -- interrupts : Interrupt source of the parent interrupt controller on - secondary GICs, or VGIC maintenance interrupt on primary GIC (see - below). - -- cpu-offset : per-cpu offset within the distributor and cpu interface - regions, used when the GIC doesn't have banked registers. The offset is - cpu-offset * cpu-nr. - -- clocks : List of phandle and clock-specific pairs, one for each entry - in clock-names. -- clock-names : List of names for the GIC clock input(s). Valid clock names - depend on the GIC variant: - "ic_clk" (for "arm,arm11mp-gic") - "PERIPHCLKEN" (for "arm,cortex-a15-gic") - "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic") - "clk" (for "arm,gic-400" and "nvidia,tegra210") - "gclk" (for "arm,pl390") - -- power-domains : A phandle and PM domain specifier as defined by bindings of - the power controller specified by phandle, used when the GIC - is part of a Power or Clock Domain. - - -Example: - - intc: interrupt-controller@fff11000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xfff11000 0x1000>, - <0xfff10100 0x100>; - }; - - -* GIC virtualization extensions (VGIC) - -For ARM cores that support the virtualization extensions, additional -properties must be described (they only exist if the GIC is the -primary interrupt controller). - -Required properties: - -- reg : Additional regions specifying the base physical address and - size of the VGIC registers. The first additional region is the GIC - virtual interface control register base and size. The 2nd additional - region is the GIC virtual cpu interface register base and size. - -- interrupts : VGIC maintenance interrupt. - -Example: - - interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x2000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - -* GICv2m extension for MSI/MSI-x support (Optional) - -Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). -This is enabled by specifying v2m sub-node(s). - -Required properties: - -- compatible : The value here should contain "arm,gic-v2m-frame". - -- msi-controller : Identifies the node as an MSI controller. - -- reg : GICv2m MSI interface register base and size - -Optional properties: - -- arm,msi-base-spi : When the MSI_TYPER register contains an incorrect - value, this property should contain the SPI base of - the MSI frame, overriding the HW value. - -- arm,msi-num-spis : When the MSI_TYPER register contains an incorrect - value, this property should contain the number of - SPIs assigned to the frame, overriding the HW value. - -Example: - - interrupt-controller@e1101000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - interrupt-controller; - interrupts = <1 8 0xf04>; - ranges = <0 0 0 0xe1100000 0 0x100000>; - reg = <0x0 0xe1110000 0 0x01000>, - <0x0 0xe112f000 0 0x02000>, - <0x0 0xe1140000 0 0x10000>, - <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@8000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x80000 0 0x1000>; - }; - - .... - - v2mN: v2m@9000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x0 0x90000 0 0x1000>; - }; - }; diff --git a/Bindings/interrupt-controller/arm,gic.yaml b/Bindings/interrupt-controller/arm,gic.yaml new file mode 100644 index 000000000000..758fbd7128e7 --- /dev/null +++ b/Bindings/interrupt-controller/arm,gic.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller v1 and v2 + +maintainers: + - Marc Zyngier + +description: |+ + ARM SMP cores are often associated with a GIC, providing per processor + interrupts (PPI), shared processor interrupts (SPI) and software + generated interrupts (SGI). + + Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. + Secondary GICs are cascaded into the upward interrupt controller and do not + have PPIs or SGIs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,arm11mp-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic + - arm,cortex-a5-gic + - arm,cortex-a9-gic + - arm,eb11mp-gic + - arm,gic-400 + - arm,pl390 + - arm,tc11mp-gic + - nvidia,tegra210-agic + - qcom,msm-8660-qgic + - qcom,msm-qgic2 + + - items: + - const: arm,arm1176jzf-devchip-gic + - const: arm,arm11mp-gic + + - items: + - const: brcm,brahma-b15-gic + - const: arm,cortex-a15-gic + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1 ] + "#size-cells": + const: 1 + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered (invalid for SPIs) + 4 = active high level-sensitive + 8 = active low level-sensitive (invalid for SPIs). + bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of + the 8 possible cpus attached to the GIC. A bit set to '1' indicated + the interrupt is wired to that CPU. Only valid for PPI interrupts. + Also note that the configurability of PPI interrupts is IMPLEMENTATION + DEFINED and as such not guaranteed to be present (most SoC available + in 2014 seem to ignore the setting of this flag and use the hardware + default value). + + reg: + description: | + Specifies base physical address(s) and size of the GIC registers. The + first region is the GIC distributor register base and size. The 2nd region + is the GIC cpu interface register base and size. + + For GICv2 with virtualization extensions, additional regions are + required for specifying the base physical address and size of the VGIC + registers. The first additional region is the GIC virtual interface + control register base and size. The 2nd additional region is the GIC + virtual cpu interface register base and size. + minItems: 2 + maxItems: 4 + + interrupts: + description: Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintenance interrupt on primary GIC (see + below). + maxItems: 1 + + cpu-offset: + description: per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset + is cpu-offset * cpu-nr. + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + description: List of names for the GIC clock input(s). Valid clock names + depend on the GIC variant. + oneOf: + - const: ic_clk # for "arm,arm11mp-gic" + - const: PERIPHCLKEN # for "arm,cortex-a15-gic" + - items: # for "arm,cortex-a9-gic" + - const: PERIPHCLK + - const: PERIPHCLKEN + - const: clk # for "arm,gic-400" and "nvidia,tegra210" + - const: gclk #for "arm,pl390" + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^v2m@[0-9a-f]+$": + description: | + * GICv2m extension for MSI/MSI-x support (Optional) + + Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). + This is enabled by specifying v2m sub-node(s). + + properties: + compatible: + const: arm,gic-v2m-frame + + msi-controller: true + + reg: + maxItems: 1 + description: GICv2m MSI interface register base and size + + arm,msi-base-spi: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the SPI base of the MSI frame, overriding + the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + arm,msi-num-spis: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the number of SPIs assigned to the + frame, overriding the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - msi-controller + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + // GICv1 + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + - | + // GICv2 + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x2000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + - | + // GICv2m extension for MSI/MSI-x support + interrupt-controller@e1101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + interrupts = <1 8 0xf04>; + ranges = <0 0 0 0xe1100000 0 0x100000>; + reg = <0x0 0xe1110000 0 0x01000>, + <0x0 0xe112f000 0 0x02000>, + <0x0 0xe1140000 0 0x10000>, + <0x0 0xe1160000 0 0x10000>; + + v2m0: v2m@8000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x80000 0 0x1000>; + }; + + //... + + v2mN: v2m@9000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x90000 0 0x1000>; + }; + }; +... diff --git a/Bindings/interrupt-controller/fsl,irqsteer.txt b/Bindings/interrupt-controller/fsl,irqsteer.txt index 45790ce6f5b9..582991c426ee 100644 --- a/Bindings/interrupt-controller/fsl,irqsteer.txt +++ b/Bindings/interrupt-controller/fsl,irqsteer.txt @@ -6,8 +6,9 @@ Required properties: - "fsl,imx8m-irqsteer" - "fsl,imx-irqsteer" - reg: Physical base address and size of registers. -- interrupts: Should contain the parent interrupt line used to multiplex the - input interrupts. +- interrupts: Should contain the up to 8 parent interrupt lines used to + multiplex the input interrupts. They should be specified sequentially + from output 0 to 7. - clocks: Should contain one clock for entry in clock-names see Documentation/devicetree/bindings/clock/clock-bindings.txt - clock-names: @@ -16,8 +17,8 @@ Required properties: - #interrupt-cells: Specifies the number of cells needed to encode an interrupt source. The value must be 1. - fsl,channel: The output channel that all input IRQs should be steered into. -- fsl,irq-groups: Number of IRQ groups managed by this controller instance. - Each group manages 64 input interrupts. +- fsl,num-irqs: Number of input interrupts of this channel. + Should be multiple of 32 input interrupts and up to 512 interrupts. Example: @@ -28,7 +29,7 @@ Example: clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; clock-names = "ipg"; fsl,channel = <0>; - fsl,irq-groups = <1>; + fsl,num-irqs = <64>; interrupt-controller; #interrupt-cells = <1>; }; diff --git a/Bindings/interrupt-controller/loongson,ls1x-intc.txt b/Bindings/interrupt-controller/loongson,ls1x-intc.txt new file mode 100644 index 000000000000..a63ed9fcb535 --- /dev/null +++ b/Bindings/interrupt-controller/loongson,ls1x-intc.txt @@ -0,0 +1,24 @@ +Loongson ls1x Interrupt Controller + +Required properties: + +- compatible : should be "loongson,ls1x-intc". Valid strings are: + +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + +intc: interrupt-controller@1fd01040 { + compatible = "loongson,ls1x-intc"; + reg = <0x1fd01040 0x18>; + + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; +}; diff --git a/Bindings/interrupt-controller/mediatek,sysirq.txt b/Bindings/interrupt-controller/mediatek,sysirq.txt index 33a98eb44949..c5d589108a94 100644 --- a/Bindings/interrupt-controller/mediatek,sysirq.txt +++ b/Bindings/interrupt-controller/mediatek,sysirq.txt @@ -9,6 +9,7 @@ Required properties: "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135 "mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127 "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622 + "mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623 "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795 "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797 "mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765 diff --git a/Bindings/interrupt-controller/renesas,irqc.txt b/Bindings/interrupt-controller/renesas,irqc.txt index 8de96a4fb2d5..f977ea7617f6 100644 --- a/Bindings/interrupt-controller/renesas,irqc.txt +++ b/Bindings/interrupt-controller/renesas,irqc.txt @@ -16,6 +16,7 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a774a1" (RZ/G2M) + - "renesas,intc-ex-r8a774c0" (RZ/G2E) - "renesas,intc-ex-r8a7795" (R-Car H3) - "renesas,intc-ex-r8a7796" (R-Car M3-W) - "renesas,intc-ex-r8a77965" (R-Car M3-N) diff --git a/Bindings/iommu/nvidia,tegra20-gart.txt b/Bindings/iommu/nvidia,tegra20-gart.txt deleted file mode 100644 index 099d9362ebc1..000000000000 --- a/Bindings/iommu/nvidia,tegra20-gart.txt +++ /dev/null @@ -1,14 +0,0 @@ -NVIDIA Tegra 20 GART - -Required properties: -- compatible: "nvidia,tegra20-gart" -- reg: Two pairs of cells specifying the physical address and size of - the memory controller registers and the GART aperture respectively. - -Example: - - gart { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ - }; diff --git a/Bindings/leds/common.txt b/Bindings/leds/common.txt index aa1399814a2a..70876ac11367 100644 --- a/Bindings/leds/common.txt +++ b/Bindings/leds/common.txt @@ -37,6 +37,18 @@ Optional properties for child nodes: "ide-disk" - LED indicates IDE disk activity (deprecated), in new implementations use "disk-activity" "timer" - LED flashes at a fixed, configurable rate + "pattern" - LED alters the brightness for the specified duration with one + software timer (requires "led-pattern" property) + +- led-pattern : Array of integers with default pattern for certain triggers. + Each trigger may parse this property differently: + - one-shot : two numbers specifying delay on and delay off (in ms), + - timer : two numbers specifying delay on and delay off (in ms), + - pattern : the pattern is given by a series of tuples, of + brightness and duration (in ms). The exact format is + described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + - led-max-microamp : Maximum LED supply current in microamperes. This property can be made mandatory for the board configurations diff --git a/Bindings/leds/leds-trigger-pattern.txt b/Bindings/leds/leds-trigger-pattern.txt new file mode 100644 index 000000000000..d3696680bfc8 --- /dev/null +++ b/Bindings/leds/leds-trigger-pattern.txt @@ -0,0 +1,49 @@ +* Pattern format for LED pattern trigger + +The pattern is given by a series of tuples, of brightness and duration (ms). +The LED is expected to traverse the series and each brightness value for the +specified duration. Duration of 0 means brightness should immediately change to +new value, and writing malformed pattern deactivates any active one. + +1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So +the tuple with duration less than dimming interval (50ms) is treated as a step +change of brightness, i.e. the subsequent brightness will be applied without +adding intervening dimming intervals. + +The gradual dimming format of the software pattern values should be: +"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...". +For example (using sysfs interface): + +echo 0 1000 255 2000 > pattern + +It will make the LED go gradually from zero-intensity to max (255) intensity in +1000 milliseconds, then back to zero intensity in 2000 milliseconds: + +LED brightness + ^ +255-| / \ / \ / + | / \ / \ / + | / \ / \ / + | / \ / \ / + 0-| / \/ \/ + +---0----1----2----3----4----5----6------------> time (s) + +2. To make the LED go instantly from one brightness value to another, we should +use zero-time lengths (the brightness must be same as the previous tuple's). So +the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2 +duration_2 brightness_2 0 ...". +For example (using sysfs interface): + +echo 0 1000 0 0 255 2000 255 0 > pattern + +It will make the LED stay off for one second, then stay at max brightness for +two seconds: + +LED brightness + ^ +255-| +---------+ +---------+ + | | | | | + | | | | | + | | | | | + 0-| -----+ +----+ +---- + +---0----1----2----3----4----5----6------------> time (s) diff --git a/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt new file mode 100644 index 000000000000..4438432bfe9b --- /dev/null +++ b/Bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -0,0 +1,127 @@ +Xilinx IPI Mailbox Controller +======================================== + +The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage +messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI +agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ +ATF | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | +Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + + +Controller Device Node: +=========================== +Required properties: +-------------------- +IPI agent node: +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" +- interrupt-parent: Phandle for the interrupt controller +- interrupts: Interrupt information corresponding to the + interrupt-names property. +- xlnx,ipi-id: local Xilinx IPI agent ID +- #address-cells: number of address cells of internal IPI mailbox nodes +- #size-cells: number of size cells of internal IPI mailbox nodes + +Internal IPI mailbox node: +- reg: IPI buffers address ranges +- reg-names: Names of the reg resources. It should have: + * local_request_region + - IPI request msg buffer written by local and read + by remote + * local_response_region + - IPI response msg buffer written by local and read + by remote + * remote_request_region + - IPI request msg buffer written by remote and read + by local + * remote_response_region + - IPI response msg buffer written by remote and read + by local +- #mbox-cells: Shall be 1. It contains: + * tx(0) or rx(1) channel +- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is + connected to. + +Optional properties: +-------------------- +- method: The method of accessing the IPI agent registers. + Permitted values are: "smc" and "hvc". Default is + "smc". + +Client Device Node: +=========================== +Required properties: +-------------------- +- mboxes: Standard property to specify a mailbox + (See ./mailbox.txt) +- mbox-names: List of identifier strings for each mailbox + channel. + +Example: +=========================== + zynqmp_ipi { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff90400 { + reg = <0xff990400 0x20>, + <0xff990420 0x20>, + <0xff990080 0x20>, + <0xff9900a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + /* APU<->RPU1 IPI mailbox controller */ + ipi_mailbox_rpu1: mailbox@ff990440 { + reg = <0xff990440 0x20>, + <0xff990460 0x20>, + <0xff990280 0x20>, + <0xff9902a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <2>; + }; + }; + rpu0 { + ... + mboxes = <&ipi_mailbox_rpu0 0>, + <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + rpu1 { + ... + mboxes = <&ipi_mailbox_rpu1 0>, + <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; diff --git a/Bindings/media/i2c/adv748x.txt b/Bindings/media/i2c/adv748x.txt index 5dddc95f9cc4..4f91686e54a6 100644 --- a/Bindings/media/i2c/adv748x.txt +++ b/Bindings/media/i2c/adv748x.txt @@ -48,7 +48,16 @@ are numbered as follows. TXA source 10 TXB source 11 -The digital output port nodes must contain at least one endpoint. +The digital output port nodes, when present, shall contain at least one +endpoint. Each of those endpoints shall contain the data-lanes property as +described in video-interfaces.txt. + +Required source endpoint properties: + - data-lanes: an array of physical data lane indexes + The accepted value(s) for this property depends on which of the two + sources are described. For TXA 1, 2 or 4 data lanes can be described + while for TXB only 1 data lane is valid. See video-interfaces.txt + for detailed description. Ports are optional if they are not connected to anything at the hardware level. diff --git a/Bindings/media/i2c/melexis,mlx90640.txt b/Bindings/media/i2c/melexis,mlx90640.txt new file mode 100644 index 000000000000..060d2b7a5893 --- /dev/null +++ b/Bindings/media/i2c/melexis,mlx90640.txt @@ -0,0 +1,20 @@ +* Melexis MLX90640 FIR Sensor + +Melexis MLX90640 FIR sensor support which allows recording of thermal data +with 32x24 resolution excluding 2 lines of coefficient data that is used by +userspace to render processed frames. + +Required Properties: + - compatible : Must be "melexis,mlx90640" + - reg : i2c address of the device + +Example: + + i2c0@1c22000 { + ... + mlx90640@33 { + compatible = "melexis,mlx90640"; + reg = <0x33>; + }; + ... + }; diff --git a/Bindings/media/i2c/mt9m001.txt b/Bindings/media/i2c/mt9m001.txt new file mode 100644 index 000000000000..c920552b03ef --- /dev/null +++ b/Bindings/media/i2c/mt9m001.txt @@ -0,0 +1,38 @@ +MT9M001: 1/2-Inch Megapixel Digital Image Sensor + +The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital +image sensor. It is programmable through I2C interface. + +Required Properties: + +- compatible: shall be "onnn,mt9m001". +- clocks: reference to the master clock into sensor + +Optional Properties: + +- reset-gpios: GPIO handle which is connected to the reset pin of the chip. + Active low. +- standby-gpios: GPIO handle which is connected to the standby pin of the chip. + Active high. + +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + &i2c1 { + camera-sensor@5d { + compatible = "onnn,mt9m001"; + reg = <0x5d>; + reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + clocks = <&camera_clk>; + port { + mt9m001_out: endpoint { + remote-endpoint = <&vcap_in>; + }; + }; + }; + }; diff --git a/Bindings/media/i2c/ov5645.txt b/Bindings/media/i2c/ov5645.txt index fd7aec9f8e24..72ad992f77be 100644 --- a/Bindings/media/i2c/ov5645.txt +++ b/Bindings/media/i2c/ov5645.txt @@ -26,9 +26,9 @@ Example: &i2c1 { ... - ov5645: ov5645@78 { + ov5645: ov5645@3c { compatible = "ovti,ov5645"; - reg = <0x78>; + reg = <0x3c>; enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; @@ -37,7 +37,7 @@ Example: clocks = <&clks 200>; clock-names = "xclk"; - clock-frequency = <23880000>; + clock-frequency = <24000000>; vdddo-supply = <&camera_dovdd_1v8>; vdda-supply = <&camera_avdd_2v8>; diff --git a/Bindings/media/imx7-csi.txt b/Bindings/media/imx7-csi.txt new file mode 100644 index 000000000000..3c07bc676bc3 --- /dev/null +++ b/Bindings/media/imx7-csi.txt @@ -0,0 +1,45 @@ +Freescale i.MX7 CMOS Sensor Interface +===================================== + +csi node +-------- + +This is device node for the CMOS Sensor Interface (CSI) which enables the chip +to connect directly to external CMOS image sensors. + +Required properties: + +- compatible : "fsl,imx7-csi"; +- reg : base address and length of the register set for the device; +- interrupts : should contain CSI interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "axi", "mclk" and "dcic" entries, matching + entries in the clock property; + +The device node shall contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt. + +In the following example a remote endpoint is a video multiplexer. + +example: + + csi: csi@30710000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-csi"; + reg = <0x30710000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CSI_MCLK_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "axi", "mclk", "dcic"; + + port { + csi_from_csi_mux: endpoint { + remote-endpoint = <&csi_mux_to_csi>; + }; + }; + }; diff --git a/Bindings/media/imx7-mipi-csi2.txt b/Bindings/media/imx7-mipi-csi2.txt new file mode 100644 index 000000000000..71fd74ed3ec8 --- /dev/null +++ b/Bindings/media/imx7-mipi-csi2.txt @@ -0,0 +1,90 @@ +Freescale i.MX7 Mipi CSI2 +========================= + +mipi_csi2 node +-------------- + +This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is +compatible with previous version of Samsung D-phy. + +Required properties: + +- compatible : "fsl,imx7-mipi-csi2"; +- reg : base address and length of the register set for the device; +- interrupts : should contain MIPI CSIS interrupt; +- clocks : list of clock specifiers, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details; +- clock-names : must contain "pclk", "wrap" and "phy" entries, matching + entries in the clock property; +- power-domains : a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. +- reset-names : should include following entry "mrst"; +- resets : a list of phandle, should contain reset entry of + reset-names; +- phy-supply : from the generic phy bindings, a phandle to a regulator that + provides power to MIPI CSIS core; + +Optional properties: + +- clock-frequency : The IP's main (system bus) clock frequency in Hz, default + value when this property is not specified is 166 MHz; +- fsl,csis-hs-settle : differential receiver (HS-RX) settle time; + +The device node should contain two 'port' child nodes with one child 'endpoint' +node, according to the bindings defined in: + Documentation/devicetree/bindings/ media/video-interfaces.txt. + The following are properties specific to those nodes. + +port node +--------- + +- reg : (required) can take the values 0 or 1, where 0 shall be + related to the sink port and port 1 shall be the source + one; + +endpoint node +------------- + +- data-lanes : (required) an array specifying active physical MIPI-CSI2 + data input lanes and their mapping to logical lanes; this + shall only be applied to port 0 (sink port), the array's + content is unused only its length is meaningful, + in this case the maximum length supported is 2; + +example: + + mipi_csi: mipi-csi@30750000 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "fsl,imx7-mipi-csi2"; + reg = <0x30750000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "pclk", "wrap", "phy"; + clock-frequency = <166000000>; + power-domains = <&pgc_mipi_phy>; + phy-supply = <®_1p0d>; + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; + reset-names = "mrst"; + fsl,csis-hs-settle = <3>; + + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + + port@1 { + reg = <1>; + + mipi_vc0_to_csi_mux: endpoint { + remote-endpoint = <&csi_mux_from_mipi_vc0>; + }; + }; + }; diff --git a/Bindings/media/mediatek-vcodec.txt b/Bindings/media/mediatek-vcodec.txt index 2a615d84a682..b6b5dde6abd8 100644 --- a/Bindings/media/mediatek-vcodec.txt +++ b/Bindings/media/mediatek-vcodec.txt @@ -66,6 +66,15 @@ vcodec_dec: vcodec@16000000 { "vencpll", "venc_lt_sel", "vdec_bus_clk_src"; + assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_VCODECPLL>; + assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>; }; vcodec_enc: vcodec@18002000 { @@ -105,4 +114,8 @@ vcodec_dec: vcodec@16000000 { "venc_sel", "venc_lt_sel_src", "venc_lt_sel"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, + <&topckgen CLK_TOP_UNIVPLL1_D2>; }; diff --git a/Bindings/media/rcar_vin.txt b/Bindings/media/rcar_vin.txt index 0dd84a183ca7..224a4615b418 100644 --- a/Bindings/media/rcar_vin.txt +++ b/Bindings/media/rcar_vin.txt @@ -7,12 +7,13 @@ family of devices. Each VIN instance has a single parallel input that supports RGB and YUV video, with both external synchronization and BT.656 synchronization for the latter. Depending on the instance the VIN input is connected to external SoC pins, or -on Gen3 platforms to a CSI-2 receiver. +on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - compatible: Must be one or more of the following - "renesas,vin-r8a7743" for the R8A7743 device - "renesas,vin-r8a7744" for the R8A7744 device - "renesas,vin-r8a7745" for the R8A7745 device + - "renesas,vin-r8a774c0" for the R8A774C0 device - "renesas,vin-r8a7778" for the R8A7778 device - "renesas,vin-r8a7779" for the R8A7779 device - "renesas,vin-r8a7790" for the R8A7790 device @@ -61,10 +62,10 @@ The per-board settings Gen2 platforms: - data-enable-active: polarity of CLKENB signal, see [1] for description. Default is active high. -The per-board settings Gen3 platforms: +The per-board settings Gen3 and RZ/G2 platforms: -Gen3 platforms can support both a single connected parallel input source -from external SoC pins (port@0) and/or multiple parallel input sources +Gen3 and RZ/G2 platforms can support both a single connected parallel input +source from external SoC pins (port@0) and/or multiple parallel input sources from local SoC CSI-2 receivers (port@1) depending on SoC. - renesas,id - ID number of the VIN, VINx in the documentation. diff --git a/Bindings/media/renesas,fcp.txt b/Bindings/media/renesas,fcp.txt index 3ec91803ba58..79c37395b396 100644 --- a/Bindings/media/renesas,fcp.txt +++ b/Bindings/media/renesas,fcp.txt @@ -2,8 +2,9 @@ Renesas R-Car Frame Compression Processor (FCP) ----------------------------------------------- The FCP is a companion module of video processing modules in the Renesas R-Car -Gen3 SoCs. It provides data compression and decompression, data caching, and -conversion of AXI transactions in order to reduce the memory bandwidth. +Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data +caching, and conversion of AXI transactions in order to reduce the memory +bandwidth. There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP for FDP (FCPF). Their configuration and behaviour depend on the module they diff --git a/Bindings/media/renesas,rcar-csi2.txt b/Bindings/media/renesas,rcar-csi2.txt index 541d936b62e8..d63275e17afd 100644 --- a/Bindings/media/renesas,rcar-csi2.txt +++ b/Bindings/media/renesas,rcar-csi2.txt @@ -2,12 +2,13 @@ Renesas R-Car MIPI CSI-2 ------------------------ The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the -Renesas R-Car family of devices. It is used in conjunction with the +Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the R-Car VIN module, which provides the video capture capabilities. Mandatory properties -------------------- - compatible: Must be one or more of the following + - "renesas,r8a774c0-csi2" for the R8A774C0 device. - "renesas,r8a7795-csi2" for the R8A7795 device. - "renesas,r8a7796-csi2" for the R8A7796 device. - "renesas,r8a77965-csi2" for the R8A77965 device. diff --git a/Bindings/media/renesas,vsp1.txt b/Bindings/media/renesas,vsp1.txt index 16427017cb45..cd5a955b2ea0 100644 --- a/Bindings/media/renesas,vsp1.txt +++ b/Bindings/media/renesas,vsp1.txt @@ -2,13 +2,13 @@ The VSP is a video processing engine that supports up-/down-scaling, alpha blending, color space conversion and various other image processing features. -It can be found in the Renesas R-Car second generation SoCs. +It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. Required properties: - compatible: Must contain one of the following values - - "renesas,vsp1" for the R-Car Gen2 VSP1 - - "renesas,vsp2" for the R-Car Gen3 VSP2 + - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1 + - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2 - reg: Base address and length of the registers block for the VSP. - interrupts: VSP interrupt specifier. diff --git a/Bindings/media/si470x.txt b/Bindings/media/si470x.txt new file mode 100644 index 000000000000..a9403558362e --- /dev/null +++ b/Bindings/media/si470x.txt @@ -0,0 +1,26 @@ +* Silicon Labs FM Radio receiver + +The Silicon Labs Si470x is family of FM radio receivers with receive power scan +supporting 76-108 MHz, programmable through an I2C interface. +Some of them includes an RDS encoder. + +Required Properties: +- compatible: Should contain "silabs,si470x" +- reg: the I2C address of the device + +Optional Properties: +- interrupts : The interrupt number +- reset-gpios: GPIO specifier for the chips reset line + +Example: + +&i2c2 { + si470x@63 { + compatible = "silabs,si470x"; + reg = <0x63>; + + interrupt-parent = <&gpj2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Bindings/media/sun6i-csi.txt b/Bindings/media/sun6i-csi.txt index d4ab34f2240c..0dd540bb03db 100644 --- a/Bindings/media/sun6i-csi.txt +++ b/Bindings/media/sun6i-csi.txt @@ -6,8 +6,9 @@ Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. Required properties: - compatible: value must be one of: * "allwinner,sun6i-a31-csi" - * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi" * "allwinner,sun8i-v3s-csi" + * "allwinner,sun50i-a64-csi" - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the CSI diff --git a/Bindings/memory-controllers/nvidia,tegra20-mc.txt b/Bindings/memory-controllers/nvidia,tegra20-mc.txt index 7d60a50a4fa1..e55328237df4 100644 --- a/Bindings/memory-controllers/nvidia,tegra20-mc.txt +++ b/Bindings/memory-controllers/nvidia,tegra20-mc.txt @@ -1,26 +1,37 @@ NVIDIA Tegra20 MC(Memory Controller) Required properties: -- compatible : "nvidia,tegra20-mc" -- reg : Should contain 2 register ranges(address and length); see the - example below. Note that the MC registers are interleaved with the - GART registers, and hence must be represented as multiple ranges. +- compatible : "nvidia,tegra20-mc-gart" +- reg : Should contain 2 register ranges: physical base address and length of + the controller's registers and the GART aperture respectively. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mc: the module's clock input - interrupts : Should contain MC General interrupt. - #reset-cells : Should be 1. This cell represents memory client module ID. The assignments may be found in header file or in the TRM documentation. +- #iommu-cells: Should be 0. This cell represents the number of cells in an + IOMMU specifier needed to encode an address. GART supports only a single + address space that is shared by all devices, therefore no additional + information needed for the address encoding. Example: mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; + interrupts = ; #reset-cells = <1>; + #iommu-cells = <0>; }; video-codec@6001a000 { compatible = "nvidia,tegra20-vde"; ... resets = <&mc TEGRA20_MC_RESET_VDE>; + iommus = <&mc>; }; diff --git a/Bindings/mfd/aspeed-lpc.txt b/Bindings/mfd/aspeed-lpc.txt index 34dd89087cff..86446074e206 100644 --- a/Bindings/mfd/aspeed-lpc.txt +++ b/Bindings/mfd/aspeed-lpc.txt @@ -135,6 +135,8 @@ Required properties: - clocks: contains a phandle to the syscon node describing the clocks. There should then be one cell representing the clock to use +Optional properties: + - memory-region: A phandle to a reserved_memory region to be used for the LPC to AHB mapping diff --git a/Bindings/mfd/cirrus,lochnagar.txt b/Bindings/mfd/cirrus,lochnagar.txt new file mode 100644 index 000000000000..004b0158cf4d --- /dev/null +++ b/Bindings/mfd/cirrus,lochnagar.txt @@ -0,0 +1,68 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + +And these for relevant defines: + [2] include/dt-bindings/pinctrl/lochnagar.h + [3] include/dt-bindings/clock/lochnagar.h + +And these documents for the required sub-node binding details: + [4] Clock: ../clock/cirrus,lochnagar.txt + [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt + [6] Regulator: ../regulator/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar1" + "cirrus,lochnagar2" + + - reg : I2C slave address + + - reset-gpios : Reset line to the Lochnagar, see [1]. + +Required sub-nodes: + + - lochnagar-clk : Binding for the clocking components, see [4]. + + - lochnagar-pinctrl : Binding for the pin control components, see [5]. + +Optional sub-nodes: + + - Bindings for the regulator components, see [6]. Only available on + Lochnagar 2. + +Optional properties: + + - present-gpios : Host present line, indicating the presence of a + host system, see [1]. This can be omitted if the present line is + tied in hardware. + +Example: + +lochnagar: lochnagar@22 { + compatible = "cirrus,lochnagar2"; + reg = <0x22>; + + reset-gpios = <&gpio0 55 0>; + present-gpios = <&gpio0 60 0>; + + lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + ... + }; + + lochnagar-pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + ... + }; +}; diff --git a/Bindings/mfd/rohm,bd71837-pmic.txt b/Bindings/mfd/rohm,bd71837-pmic.txt index a4b056761eaa..d5f68ac78d15 100644 --- a/Bindings/mfd/rohm,bd71837-pmic.txt +++ b/Bindings/mfd/rohm,bd71837-pmic.txt @@ -23,6 +23,20 @@ Required properties: Optional properties: - clock-output-names : Should contain name for output clock. +- rohm,reset-snvs-powered : Transfer BD718x7 to SNVS state at reset. + +The BD718x7 supports two different HW states as reset target states. States +are called as SNVS and READY. At READY state all the PMIC power outputs go +down and OTP is reload. At the SNVS state all other logic and external +devices apart from the SNVS power domain are shut off. Please refer to NXP +i.MX8 documentation for further information regarding SNVS state. When a +reset is done via SNVS state the PMIC OTP data is not reload. This causes +power outputs that have been under SW control to stay down when reset has +switched power state to SNVS. If reset is done via READY state the power +outputs will be returned to HW control by OTP loading. Thus the reset +target state is set to READY by default. If SNVS state is used the boot +crucial regulators must have the regulator-always-on and regulator-boot-on +properties set in regulator node. Example: @@ -43,6 +57,7 @@ Example: #clock-cells = <0>; clocks = <&osc 0>; clock-output-names = "bd71837-32k-out"; + rohm,reset-snvs-powered; regulators { buck1: BUCK1 { @@ -50,8 +65,10 @@ Example: regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; }; + // [...] }; }; diff --git a/Bindings/mfd/st,stpmic1.txt b/Bindings/mfd/st,stpmic1.txt new file mode 100644 index 000000000000..afd45c089585 --- /dev/null +++ b/Bindings/mfd/st,stpmic1.txt @@ -0,0 +1,61 @@ +* STMicroelectronics STPMIC1 Power Management IC + +Required properties: +- compatible: : "st,stpmic1" +- reg: : The I2C slave address for the STPMIC1 chip. +- interrupts: : The interrupt line the device is connected to. +- #interrupt-cells: : Should be 1. +- interrupt-controller: : Marks the device node as an interrupt controller. + Interrupt numbers are defined at + dt-bindings/mfd/st,stpmic1.h. + +STPMIC1 consists in a varied group of sub-devices. +Each sub-device binding is be described in own documentation file. + +Device Description +------ ------------ +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt + +Example: + +#include + +pmic: pmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupt-parent = <&gpioa>; + interrupts = <0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = ,; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + }; + + regulators { + compatible = "st,stpmic1-regulators"; + + vdd_core: buck1 { + regulator-name = "vdd_core"; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1200000>; + }; + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-pull-down; + }; + }; diff --git a/Bindings/mfd/stmpe.txt b/Bindings/mfd/stmpe.txt index c797c05cd3c2..d4408a417193 100644 --- a/Bindings/mfd/stmpe.txt +++ b/Bindings/mfd/stmpe.txt @@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio, keypad, touchscreen, adc, pwm, rotator. Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device + - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" + - reg : I2C/SPI address of the device Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ + - interrupts : The interrupt outputs from the controller + - interrupt-controller : Marks the device node as an interrupt controller + - wakeup-source : Marks the input device as wakable + - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 + - irq-gpio : If present, which GPIO to use for event IRQ + +Optional properties for devices with touch and ADC (STMPE811|STMPE610): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks 4 -> 80 clocks (recommended) + 1 -> 44 clocks 5 -> 96 clocks + 2 -> 56 clocks 6 -> 124 clocks + 3 -> 64 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz + 1 -> 3.25 MHz Example: diff --git a/Bindings/mips/lantiq/rcu-gphy.txt b/Bindings/mips/lantiq/rcu-gphy.txt deleted file mode 100644 index a0c19bd1ce66..000000000000 --- a/Bindings/mips/lantiq/rcu-gphy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Lantiq XWAY SoC GPHY binding -============================ - -This binding describes a software-defined ethernet PHY, provided by the RCU -module on newer Lantiq XWAY SoCs (xRX200 and newer). - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,xrx200a1x-gphy" - "lantiq,xrx200a2x-gphy" - "lantiq,xrx300-gphy" - "lantiq,xrx330-gphy" -- reg : Addrress of the GPHY FW load address register -- resets : Must reference the RCU GPHY reset bit -- reset-names : One entry, value must be "gphy" or optional "gphy2" -- clocks : A reference to the (PMU) GPHY clock gate - -Optional properties: -- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in - - - -------------------------------------------------------------------------------- -Example for the GPHys on the xRX200 SoCs: - -#include - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; - lantiq,gphy-mode = ; - }; diff --git a/Bindings/mips/lantiq/rcu.txt b/Bindings/mips/lantiq/rcu.txt index 7f0822b4beae..58d51f480c9e 100644 --- a/Bindings/mips/lantiq/rcu.txt +++ b/Bindings/mips/lantiq/rcu.txt @@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC: ranges = <0x0 0x203000 0x100>; big-endian; - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = ; - }; - - gphy1: gphy@68 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x68 0x4>; - - resets = <&reset0 29 28>, <&reset1 6 6>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = ; - }; - reset0: reset-controller@10 { compatible = "lantiq,xrx200-reset"; reg = <0x10 4>, <0x14 4>; diff --git a/Bindings/misc/qcom,fastrpc.txt b/Bindings/misc/qcom,fastrpc.txt new file mode 100644 index 000000000000..2a1827ab50d2 --- /dev/null +++ b/Bindings/misc/qcom,fastrpc.txt @@ -0,0 +1,78 @@ +Qualcomm Technologies, Inc. FastRPC Driver + +The FastRPC implements an IPC (Inter-Processor Communication) +mechanism that allows for clients to transparently make remote method +invocations across DSP and APPS boundaries. This enables developers +to offload tasks to the DSP and free up the application processor for +other tasks. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,fastrpc" + +- label + Usage: required + Value type: + Definition: should specify the dsp domain name this fastrpc + corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp" + +- #address-cells + Usage: required + Value type: + Definition: Must be 1 + +- #size-cells + Usage: required + Value type: + Definition: Must be 0 + += COMPUTE BANKS +Each subnode of the Fastrpc represents compute context banks available +on the dsp. +- All Compute context banks MUST contain the following properties: + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,fastrpc-compute-cb" + +- reg + Usage: required + Value type: + Definition: Context Bank ID. + +- qcom,nsessions: + Usage: Optional + Value type: + Defination: A value indicating how many sessions can share this + context bank. Defaults to 1 when this property + is not specified. + +Example: + +adsp-pil { + compatible = "qcom,msm8996-adsp-pil"; + ... + smd-edge { + label = "lpass"; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,smd-channels = "fastrpcsmd-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + }; + + cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + }; + ... + }; + }; +}; diff --git a/Bindings/mmc/fsl-imx-esdhc.txt b/Bindings/mmc/fsl-imx-esdhc.txt index 9201a7d8d7b0..540c65ed9cba 100644 --- a/Bindings/mmc/fsl-imx-esdhc.txt +++ b/Bindings/mmc/fsl-imx-esdhc.txt @@ -15,6 +15,7 @@ Required properties: "fsl,imx6q-usdhc" "fsl,imx6sl-usdhc" "fsl,imx6sx-usdhc" + "fsl,imx6ull-usdhc" "fsl,imx7d-usdhc" "fsl,imx8qxp-usdhc" diff --git a/Bindings/mmc/mmc.txt b/Bindings/mmc/mmc.txt index f5a0923b34ca..cdbcfd3a4ff2 100644 --- a/Bindings/mmc/mmc.txt +++ b/Bindings/mmc/mmc.txt @@ -62,6 +62,8 @@ Optional properties: be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. +- supports-cqe : The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/Bindings/mmc/nvidia,tegra20-sdhci.txt b/Bindings/mmc/nvidia,tegra20-sdhci.txt index 32b4b4e41923..2cecdc71d94c 100644 --- a/Bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Bindings/mmc/nvidia,tegra20-sdhci.txt @@ -39,12 +39,16 @@ sdhci@c8000200 { bus-width = <8>; }; -Optional properties for Tegra210 and Tegra186: +Optional properties for Tegra210, Tegra186 and Tegra194: - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8" for controllers supporting multiple voltage levels. The order of names should correspond to the pin configuration states in pinctrl-0 and pinctrl-1. +- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for + Tegra210 where pad config registers are in the pinmux register domain + for pull-up-strength and pull-down-strength values configuration when + using pads at 3V3 and 1V8 levels. - nvidia,only-1-8-v : The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - nvidia,pad-autocal-pull-up-offset-3v3, diff --git a/Bindings/mmc/ti-omap.txt b/Bindings/mmc/ti-omap.txt index 8de579969763..02fd31cf361d 100644 --- a/Bindings/mmc/ti-omap.txt +++ b/Bindings/mmc/ti-omap.txt @@ -24,31 +24,3 @@ Examples: dmas = <&sdma 61 &sdma 62>; dma-names = "tx", "rx"; }; - -* TI MMC host controller for OMAP1 and 2420 - -The MMC Host Controller on TI OMAP1 and 2420 family provides -an interface for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the omap mmc driver. - -Note that this driver will not work with omap2430 or later omaps, -please see the omap hsmmc driver for the current omaps. - -Required properties: -- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers -- ti,hwmods: For 2420, must be "msdi", where n is controller - instance starting 1 - -Examples: - - msdi1: mmc@4809c000 { - compatible = "ti,omap2420-mmc"; - ti,hwmods = "msdi1"; - reg = <0x4809c000 0x80>; - interrupts = <83>; - dmas = <&sdma 61 &sdma 62>; - dma-names = "tx", "rx"; - }; - diff --git a/Bindings/mtd/amlogic,meson-nand.txt b/Bindings/mtd/amlogic,meson-nand.txt new file mode 100644 index 000000000000..3983c11e062c --- /dev/null +++ b/Bindings/mtd/amlogic,meson-nand.txt @@ -0,0 +1,60 @@ +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs + +This file documents the properties in addition to those available in +the MTD NAND bindings. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gxl-nfc" + - "amlogic,meson-axg-nfc" +- clocks : + A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. + +- clock-names: Should contain the following: + "core" - NFC module gate clock + "device" - device clock from eMMC sub clock controller + "rx" - rx clock phase + "tx" - tx clock phase + +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC + controller port C + +Optional children nodes: +Children nodes represent the available nand chips. + +Other properties: +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example demonstrate on AXG SoC: + + sd_emmc_c_clkc: mmc@7000 { + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x800>; + }; + + nand-controller@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + + clocks = <&clkc CLKID_SD_EMMC_C>, + <&sd_emmc_c_clkc CLKID_MMC_DIV>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>, + <&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>; + clock-names = "core", "device", "rx", "tx"; + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; + + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + }; + }; diff --git a/Bindings/mtd/cadence-quadspi.txt b/Bindings/mtd/cadence-quadspi.txt index bb2075df9b38..4345c3a6f530 100644 --- a/Bindings/mtd/cadence-quadspi.txt +++ b/Bindings/mtd/cadence-quadspi.txt @@ -4,6 +4,7 @@ Required properties: - compatible : should be one of the following: Generic default - "cdns,qspi-nor". For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the diff --git a/Bindings/mtd/mtk-quadspi.txt b/Bindings/mtd/mtk-quadspi.txt index 56d3668e2c50..a12e3b5c495d 100644 --- a/Bindings/mtd/mtk-quadspi.txt +++ b/Bindings/mtd/mtk-quadspi.txt @@ -1,4 +1,4 @@ -* Serial NOR flash controller for MTK MT81xx (and similar) +* Serial NOR flash controller for MediaTek SoCs Required properties: - compatible: For mt8173, compatible should be "mediatek,mt8173-nor", @@ -10,6 +10,7 @@ Required properties: "mediatek,mt2712-nor", "mediatek,mt8173-nor" "mediatek,mt7622-nor", "mediatek,mt8173-nor" "mediatek,mt7623-nor", "mediatek,mt8173-nor" + "mediatek,mt7629-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller diff --git a/Bindings/mtd/stm32-fmc2-nand.txt b/Bindings/mtd/stm32-fmc2-nand.txt new file mode 100644 index 000000000000..ad2bef826582 --- /dev/null +++ b/Bindings/mtd/stm32-fmc2-nand.txt @@ -0,0 +1,61 @@ +STMicroelectronics Flexible Memory Controller 2 (FMC2) +NAND Interface + +Required properties: +- compatible: Should be one of: + * st,stm32mp15-fmc2 +- reg: NAND flash controller memory areas. + First region contains the register location. + Regions 2 to 4 respectively contain the data, command, + and address space for CS0. + Regions 5 to 7 contain the same areas for CS1. +- interrupts: The interrupt number +- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt) +- clocks: The clock needed by the NAND flash controller + +Optional properties: +- resets: Reference to a reset controller asserting the FMC controller +- dmas: DMA specifiers (see: dma/stm32-mdma.txt) +- dma-names: Must be "tx", "rx" and "ecc" + +* NAND device bindings: + +Required properties: +- reg: describes the CS lines assigned to the NAND device. + +Optional properties: +- nand-on-flash-bbt: see nand.txt +- nand-ecc-strength: see nand.txt +- nand-ecc-step-size: see nand.txt + +The following ECC strength and step size are currently supported: + - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming) + - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) + - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default) + +Example: + + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = ; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + pinctrl-names = "default"; + pinctrl-0 = <&fmc_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; diff --git a/Bindings/net/btusb.txt b/Bindings/net/btusb.txt index 37d67926dd6d..b1ad6ee68e90 100644 --- a/Bindings/net/btusb.txt +++ b/Bindings/net/btusb.txt @@ -9,6 +9,9 @@ Required properties: (more may be added later) are: "usb1286,204e" (Marvell 8997) + "usbcf3,e300" (Qualcomm QCA6174A) + "usb4ca,301a" (Qualcomm QCA6174A (Lite-On)) + Also, vendors that use btusb may have device additional properties, e.g: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt diff --git a/Bindings/net/cpsw-phy-sel.txt b/Bindings/net/cpsw-phy-sel.txt index 764c0c79b43d..5d76f991c027 100644 --- a/Bindings/net/cpsw-phy-sel.txt +++ b/Bindings/net/cpsw-phy-sel.txt @@ -1,4 +1,4 @@ -TI CPSW Phy mode Selection Device Tree Bindings +TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED) ----------------------------------------------- Required properties: diff --git a/Bindings/net/davinci_emac.txt b/Bindings/net/davinci_emac.txt index 24c5cdaba8d2..ca83dcc84fb8 100644 --- a/Bindings/net/davinci_emac.txt +++ b/Bindings/net/davinci_emac.txt @@ -20,6 +20,8 @@ Required properties: Optional properties: - phy-handle: See ethernet.txt file in the same directory. If absent, davinci_emac driver defaults to 100/FULL. +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used - ti,davinci-rmii-en: 1 byte, 1 means use RMII - ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM? diff --git a/Bindings/net/dsa/dsa.txt b/Bindings/net/dsa/dsa.txt index 35694c0c376b..d66a5292b9d3 100644 --- a/Bindings/net/dsa/dsa.txt +++ b/Bindings/net/dsa/dsa.txt @@ -71,6 +71,10 @@ properties, described in binding documents: Documentation/devicetree/bindings/net/fixed-link.txt for details. +- local-mac-address : See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + Example The following example shows three switches on three MDIO busses, @@ -97,6 +101,7 @@ linked into one DSA cluster. port@1 { reg = <1>; label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; }; port@2 { diff --git a/Bindings/net/dsa/ksz.txt b/Bindings/net/dsa/ksz.txt index 0f407fb371ce..e7db7268fd0f 100644 --- a/Bindings/net/dsa/ksz.txt +++ b/Bindings/net/dsa/ksz.txt @@ -7,6 +7,11 @@ Required properties: of the following: - "microchip,ksz9477" - "microchip,ksz9897" + - "microchip,ksz9896" + - "microchip,ksz9567" + - "microchip,ksz8565" + - "microchip,ksz9893" + - "microchip,ksz9563" Optional properties: @@ -19,58 +24,96 @@ Examples: Ethernet switch connected via SPI to the host, CPU port wired to eth0: - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; + eth0: ethernet@10001000 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; + spi1: spi@f8008000 { + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; + ksz9477: ksz9477@0 { + compatible = "microchip,ksz9477"; + reg = <0>; - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + ksz8565: ksz8565@0 { + compatible = "microchip,ksz8565"; + reg = <0>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Bindings/net/dsa/mt7530.txt b/Bindings/net/dsa/mt7530.txt index aa3527f71fdc..47aa205ee0bd 100644 --- a/Bindings/net/dsa/mt7530.txt +++ b/Bindings/net/dsa/mt7530.txt @@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch Required properties: -- compatible: Must be compatible = "mediatek,mt7530"; +- compatible: may be compatible = "mediatek,mt7530" + or compatible = "mediatek,mt7621" - #address-cells: Must be 1. - #size-cells: Must be 0. - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part on multi-chip module belong to MT7623A has or the remotely standalone chip as the function MT7623N reference board provided for. + +If compatible mediatek,mt7530 is set then the following properties are required + - core-supply: Phandle to the regulator node necessary for the core power. - io-supply: Phandle to the regulator node necessary for the I/O power. See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/Bindings/net/dsa/qca8k.txt b/Bindings/net/dsa/qca8k.txt index bbcb255c3150..93a7469e70d4 100644 --- a/Bindings/net/dsa/qca8k.txt +++ b/Bindings/net/dsa/qca8k.txt @@ -12,10 +12,15 @@ Required properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of -port and PHY id, each subnode describing a port needs to have a valid phandle -referencing the internal PHY connected to it. The CPU port of this switch is -always port 0. +described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +mdio-bus each subnode describing a port needs to have a valid phandle +referencing the internal PHY it is connected to. This is because there's no +N:N mapping of port and PHY id. + +Don't use mixed external and internal mdio-bus configurations, as this is +not supported by the hardware. + +The CPU port of this switch is always port 0. A CPU port node has the following optional node: @@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties: - 'full-duplex' (boolean, optional), to indicate that full duplex is used. When absent, half duplex is assumed. -Example: +Examples: +for the external mdio-bus configuration: &mdio0 { phy_port1: phy@0 { @@ -55,12 +61,12 @@ Example: reg = <4>; }; - switch0@0 { + switch@10 { compatible = "qca,qca8337"; #address-cells = <1>; #size-cells = <0>; - reg = <0>; + reg = <0x10>; ports { #address-cells = <1>; @@ -108,3 +114,56 @@ Example: }; }; }; + +for the internal master mdio-bus configuration: + + &mdio0 { + switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + fixed-link { + speed = 1000; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "wan"; + }; + }; + }; + }; diff --git a/Bindings/net/ethernet.txt b/Bindings/net/ethernet.txt index cfc376bc977a..a68621580584 100644 --- a/Bindings/net/ethernet.txt +++ b/Bindings/net/ethernet.txt @@ -10,15 +10,14 @@ Documentation/devicetree/bindings/phy/phy-bindings.txt. the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the "local-mac-address" property; -- nvmem-cells: phandle, reference to an nvmem node for the MAC address; -- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used; - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in the Devicetree Specification). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: - * "internal" + * "internal" (Internal means there is not a standard bus between the MAC and + the PHY, something proprietary is being used to embed the PHY in the MAC.) * "mii" * "gmii" * "sgmii" diff --git a/Bindings/net/fsl-enetc.txt b/Bindings/net/fsl-enetc.txt new file mode 100644 index 000000000000..c812e25ae90f --- /dev/null +++ b/Bindings/net/fsl-enetc.txt @@ -0,0 +1,69 @@ +* ENETC ethernet device tree bindings + +Depending on board design and ENETC port type (internal or +external) there are two supported link modes specified by +below device tree bindings. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc". + +1) The ENETC external port is connected to a MDIO configurable phy: + +In this case, the ENETC node should include a "mdio" sub-node +that in turn should contain the "ethernet-phy" node describing the +external phy. Below properties are required, their bindings +already defined in ethernet.txt or phy.txt, under +Documentation/devicetree/bindings/net/*. + +Required: + +- phy-handle : Phandle to a PHY on the MDIO bus. + Defined in ethernet.txt. + +- phy-connection-type : Defined in ethernet.txt. + +- mdio : "mdio" node, defined in mdio.txt. + +- ethernet-phy : "ethernet-phy" node, defined in phy.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + }; + +2) The ENETC port is an internal port or has a fixed-link external +connection: + +In this case, the ENETC port node defines a fixed link connection, +as specified by "fixed-link.txt", under +Documentation/devicetree/bindings/net/*. + +Required: + +- fixed-link : "fixed-link" node, defined in "fixed-link.txt". + +Example: + ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/Bindings/net/macb.txt b/Bindings/net/macb.txt index 3e17ac1d5d58..8b80515729d7 100644 --- a/Bindings/net/macb.txt +++ b/Bindings/net/macb.txt @@ -3,8 +3,8 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP - available on sama5d3 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. + Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on @@ -26,6 +26,10 @@ Required properties: Optional elements: 'tsu_clk' - clocks: Phandles to input clocks. +Optional properties: +- nvmem-cells: phandle, reference to an nvmem node for the MAC address +- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used + Optional properties for PHY child node: - reset-gpios : Should specify the gpio for phy reset - magic-packet : If present, indicates that the hardware supports waking diff --git a/Bindings/net/marvell-armada-370-neta.txt b/Bindings/net/marvell-armada-370-neta.txt index bedcfd5a52cd..691f886cfc4a 100644 --- a/Bindings/net/marvell-armada-370-neta.txt +++ b/Bindings/net/marvell-armada-370-neta.txt @@ -19,7 +19,7 @@ Optional properties: "marvell,armada-370-neta" and 9800B for others. - clock-names: List of names corresponding to clocks property; shall be "core" for core clock and "bus" for the optional bus clock. - +- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt Optional properties (valid only for Armada XP/38x): diff --git a/Bindings/net/mdio-mux-multiplexer.txt b/Bindings/net/mdio-mux-multiplexer.txt new file mode 100644 index 000000000000..534e38058fe0 --- /dev/null +++ b/Bindings/net/mdio-mux-multiplexer.txt @@ -0,0 +1,82 @@ +Properties for an MDIO bus multiplexer consumer device + +This is a special case of MDIO mux when MDIO mux is defined as a consumer +of a mux producer device. The mux producer can be of any type like mmio mux +producer, gpio mux producer or generic register based mux producer. + +Required properties in addition to the MDIO Bus multiplexer properties: + +- compatible : should be "mmio-mux-multiplexer" +- mux-controls : mux controller node to use for operating the mux +- mdio-parent-bus : phandle to the parent MDIO bus. + +each child node of mdio bus multiplexer consumer device represent a mdio +bus. + +for more information please refer +Documentation/devicetree/bindings/mux/mux-controller.txt +and Documentation/devicetree/bindings/net/mdio-mux.txt + +Example: +In below example the Mux producer and consumer are separate nodes. + +&i2c0 { + fpga@66 { // fpga connected to i2c + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { // Mux Producer + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + }; +}; + +mdio-mux-1 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +mdio-mux-2 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; diff --git a/Bindings/net/mediatek-bluetooth.txt b/Bindings/net/mediatek-bluetooth.txt index 14ceb2a5b4e8..41a7dcc80f5b 100644 --- a/Bindings/net/mediatek-bluetooth.txt +++ b/Bindings/net/mediatek-bluetooth.txt @@ -33,3 +33,67 @@ Example: clock-names = "ref"; }; }; + +MediaTek UART based Bluetooth Devices +================================== + +This device is a serial attached device to UART device and thus it must be a +child node of the serial node with UART. + +Please refer to the following documents for generic properties: + + Documentation/devicetree/bindings/serial/slave-device.txt + +Required properties: + +- compatible: Must be + "mediatek,mt7663u-bluetooth": for MT7663U device + "mediatek,mt7668u-bluetooth": for MT7668U device +- vcc-supply: Main voltage regulator +- pinctrl-names: Should be "default", "runtime" +- pinctrl-0: Should contain UART RXD low when the device is powered up to + enter proper bootstrap mode. +- pinctrl-1: Should contain UART mode pin ctrl + +Optional properties: + +- reset-gpios: GPIO used to reset the device whose initial state keeps low, + if the GPIO is missing, then board-level design should be + guaranteed. +- current-speed: Current baud rate of the device whose defaults to 921600 + +Example: + + uart1_pins_boot: uart1-default { + pins-dat { + pinmux = ; + output-low; + }; + }; + + uart1_pins_runtime: uart1-runtime { + pins-dat { + pinmux = , + ; + }; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = ; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; + + bluetooth { + compatible = "mediatek,mt7663u-bluetooth"; + vcc-supply = <®_5v>; + reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "runtime"; + pinctrl-0 = <&uart1_pins_boot>; + pinctrl-1 = <&uart1_pins_runtime>; + current-speed = <921600>; + }; + }; diff --git a/Bindings/net/nixge.txt b/Bindings/net/nixge.txt index e55af7f0881a..85d7240a9b20 100644 --- a/Bindings/net/nixge.txt +++ b/Bindings/net/nixge.txt @@ -1,16 +1,52 @@ * NI XGE Ethernet controller Required properties: -- compatible: Should be "ni,xge-enet-2.00" -- reg: Address and length of the register set for the device +- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for + older device trees with DMA engines co-located in the address map, + with the one reg entry to describe the whole device. +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names. +- reg-names: Should contain the reg names + "dma": DMA engine control and status region + "ctrl": MDIO and PHY control and status region - interrupts: Should contain tx and rx interrupt - interrupt-names: Should be "rx" and "tx" - phy-mode: See ethernet.txt file in the same directory. -- phy-handle: See ethernet.txt file in the same directory. - nvmem-cells: Phandle of nvmem cell containing the MAC address - nvmem-cell-names: Should be "address" +Optional properties: +- mdio subnode to indicate presence of MDIO controller +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. +- phy-handle: See ethernet.txt file in the same directory. + Examples (10G generic PHY): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-3.00"; + reg = <0x40000000 0x4000 + 0x41002000 0x2000>; + reg-names = "dma", "ctrl"; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + phy-handle = <ðernet_phy1>; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + }; + +Examples (10G generic PHY, no MDIO): nixge0: ethernet@40000000 { compatible = "ni,xge-enet-2.00"; reg = <0x40000000 0x6000>; @@ -24,9 +60,33 @@ Examples (10G generic PHY): phy-mode = "xgmii"; phy-handle = <ðernet_phy1>; - - ethernet_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; - }; + }; + +Examples (1G generic fixed-link + MDIO): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-2.00"; + reg = <0x40000000 0x6000>; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + + fixed-link { + speed = <1000>; + pause; + link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>; + }; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; + }; diff --git a/Bindings/net/qcom,ethqos.txt b/Bindings/net/qcom,ethqos.txt new file mode 100644 index 000000000000..fcf5035810b5 --- /dev/null +++ b/Bindings/net/qcom,ethqos.txt @@ -0,0 +1,64 @@ +Qualcomm Ethernet ETHQOS device + +This documents dwmmac based ethernet device which supports Gigabit +ethernet for version v2.3.0 onwards. + +This device has following properties: + +Required properties: + +- compatible: Should be qcom,qcs404-ethqos" + +- reg: Address and length of the register set for the device + +- reg-names: Should contain register names "stmmaceth", "rgmii" + +- clocks: Should contain phandle to clocks + +- clock-names: Should contain clock names "stmmaceth", "pclk", + "ptp_ref", "rgmii" + +- interrupts: Should contain phandle to interrupts + +- interrupt-names: Should contain interrupt names "macirq", "eth_lpi" + +Rest of the properties are defined in stmmac.txt file in same directory + + +Example: + +ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + + snps,txpbl = <8>; + snps,rxpbl = <2>; + snps,aal; + snps,tso; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; + +}; diff --git a/Bindings/net/stm32-dwmac.txt b/Bindings/net/stm32-dwmac.txt index 1341012722aa..a90eef11dc46 100644 --- a/Bindings/net/stm32-dwmac.txt +++ b/Bindings/net/stm32-dwmac.txt @@ -14,8 +14,7 @@ Required properties: - clock-names: Should be "stmmaceth" for the host clock. Should be "mac-clk-tx" for the MAC TX clock. Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock and, - "syscfg-clk" for SYSCFG clock. + For MPU family need to add also "ethstp" for power mode clock - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. Should be "macirq" for the main MAC IRQ @@ -24,9 +23,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. +- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. Example: diff --git a/Bindings/net/wireless/mediatek,mt76.txt b/Bindings/net/wireless/mediatek,mt76.txt index 0c17a0ec9b7b..7b9a776230c0 100644 --- a/Bindings/net/wireless/mediatek,mt76.txt +++ b/Bindings/net/wireless/mediatek,mt76.txt @@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. +Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. +For SoC, use the compatible string "mediatek,mt7628-wmac" and the following +properties: + +- reg: Address and length of the register set for the device. +- interrupts: Main device interrupt + Optional properties: - mac-address: See ethernet.txt in the parent directory @@ -30,3 +37,15 @@ Optional nodes: }; }; }; + +MT7628 example: + +wmac: wmac@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + mediatek,mtd-eeprom = <&factory 0x0000>; +}; diff --git a/Bindings/nvmem/imx-ocotp.txt b/Bindings/nvmem/imx-ocotp.txt index 792bc5fafeb9..7a999a135e56 100644 --- a/Bindings/nvmem/imx-ocotp.txt +++ b/Bindings/nvmem/imx-ocotp.txt @@ -1,7 +1,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings This binding represents the on-chip eFuse OTP controller found on -i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs. +i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs. Required properties: - compatible: should be one of @@ -9,8 +9,10 @@ Required properties: "fsl,imx6sl-ocotp" (i.MX6SL), or "fsl,imx6sx-ocotp" (i.MX6SX), "fsl,imx6ul-ocotp" (i.MX6UL), + "fsl,imx6ull-ocotp" (i.MX6ULL/ULZ), "fsl,imx7d-ocotp" (i.MX7D/S), "fsl,imx6sll-ocotp" (i.MX6SLL), + "fsl,imx7ulp-ocotp" (i.MX7ULP), followed by "syscon". - #address-cells : Should be 1 - #size-cells : Should be 1 diff --git a/Bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Bindings/nvmem/xlnx,zynqmp-nvmem.txt new file mode 100644 index 000000000000..4881561b3a02 --- /dev/null +++ b/Bindings/nvmem/xlnx,zynqmp-nvmem.txt @@ -0,0 +1,46 @@ +-------------------------------------------------------------------------- += Zynq UltraScale+ MPSoC nvmem firmware driver binding = +-------------------------------------------------------------------------- +The nvmem_firmware node provides access to the hardware related data +like soc revision, IDCODE... etc, By using the firmware interface. + +Required properties: +- compatible: should be "xlnx,zynqmp-nvmem-fw" + += Data cells = +Are child nodes of silicon id, bindings of which as described in +bindings/nvmem/nvmem.txt + +------- + Example +------- +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + soc_revision: soc_revision { + reg = <0x0 0x4>; + }; + }; + }; +}; + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + pcap { + ... + + nvmem-cells = <&soc_revision>; + nvmem-cell-names = "soc_revision"; + + ... + }; diff --git a/Bindings/opp/opp.txt b/Bindings/opp/opp.txt index c396c4c0af92..76b6c79604a5 100644 --- a/Bindings/opp/opp.txt +++ b/Bindings/opp/opp.txt @@ -129,6 +129,9 @@ Optional properties: - opp-microamp-: Named opp-microamp property. Similar to opp-microvolt- property, but for microamp instead. +- opp-level: A value representing the performance level of the device, + expressed as a 32-bit integer. + - clock-latency-ns: Specifies the maximum possible transition latency (in nanoseconds) for switching to this OPP from any other OPP. diff --git a/Bindings/pci/altera-pcie.txt b/Bindings/pci/altera-pcie.txt index 6c396f17c91a..816b244a221e 100644 --- a/Bindings/pci/altera-pcie.txt +++ b/Bindings/pci/altera-pcie.txt @@ -1,11 +1,13 @@ * Altera PCIe controller Required properties: -- compatible : should contain "altr,pcie-root-port-1.0" +- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0" - reg: a list of physical base address and length for TXS and CRA. + For "altr,pcie-root-port-2.0", additional HIP base address and length. - reg-names: must include the following entries: "Txs": TX slave port region "Cra": Control register access region + "Hip": Hard IP region (if "altr,pcie-root-port-2.0") - interrupts: specifies the interrupt source of the parent interrupt controller. The format of the interrupt specifier depends on the parent interrupt controller. diff --git a/Bindings/pci/fsl,imx6q-pcie.txt b/Bindings/pci/fsl,imx6q-pcie.txt index d514c1f2365f..a7f5f5afa0e6 100644 --- a/Bindings/pci/fsl,imx6q-pcie.txt +++ b/Bindings/pci/fsl,imx6q-pcie.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx6sx-pcie", - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" + - "fsl,imx8mq-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: PCIE_PHY power domains - power-domain-names: Must be "pcie", "pcie_phy" -Additional required properties for imx7d-pcie: +Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block @@ -53,6 +54,11 @@ Additional required properties for imx7d-pcie: - "pciephy" - "apps" - "turnoff" +- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node. + +Additional required properties for imx8mq-pcie: +- clock-names: Must include the following additional entries: + - "pcie_aux" Example: @@ -79,3 +85,13 @@ Example: clocks = <&clks 144>, <&clks 206>, <&clks 189>; clock-names = "pcie", "pcie_bus", "pcie_phy"; }; + +* Freescale i.MX7d PCIe PHY + +This is the PHY associated with the IMX7d PCIe controller. It's used by the +PCI-e controller via the fsl,imx7d-pcie-phy phandle. + +Required properties: +- compatible: + - "fsl,imx7d-pcie-phy" +- reg: base address and length of the PCIe PHY controller diff --git a/Bindings/pci/layerscape-pci.txt b/Bindings/pci/layerscape-pci.txt index 9b2b8d66d1f4..e20ceaab9b38 100644 --- a/Bindings/pci/layerscape-pci.txt +++ b/Bindings/pci/layerscape-pci.txt @@ -13,6 +13,7 @@ information. Required properties: - compatible: should contain the platform identifier such as: + RC mode: "fsl,ls1021a-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" "fsl,ls2088a-pcie" @@ -20,6 +21,8 @@ Required properties: "fsl,ls1046a-pcie" "fsl,ls1043a-pcie" "fsl,ls1012a-pcie" + EP mode: + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Bindings/pci/rcar-pci.txt b/Bindings/pci/rcar-pci.txt index 976ef7bfff93..6904882a0e94 100644 --- a/Bindings/pci/rcar-pci.txt +++ b/Bindings/pci/rcar-pci.txt @@ -3,6 +3,7 @@ Required properties: compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a7744" for the R8A7744 SoC; + "renesas,pcie-r8a774c0" for the R8A774C0 SoC; "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7790" for the R8A7790 SoC; "renesas,pcie-r8a7791" for the R8A7791 SoC; @@ -13,7 +14,8 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC; "renesas,pcie-r8a77990" for the R8A77990 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or RZ/G1 compatible device. - "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. + "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 or + RZ/G2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Bindings/pci/ti-pci.txt b/Bindings/pci/ti-pci.txt index 452fe48c4fdd..d5cbfe6b0d89 100644 --- a/Bindings/pci/ti-pci.txt +++ b/Bindings/pci/ti-pci.txt @@ -1,14 +1,21 @@ TI PCI Controllers PCIe DesignWare Controller - - compatible: Should be "ti,dra7-pcie" for RC - Should be "ti,dra7-pcie-ep" for EP + - compatible: Should be "ti,dra7-pcie" for RC (deprecated) + Should be "ti,dra7-pcie-ep" for EP (deprecated) + Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode + Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode + Should be "ti,dra726-pcie-rc" for dra72x in RC mode + Should be "ti,dra726-pcie-ep" for dra72x in EP mode - phys : list of PHY specifiers (used by generic PHY framework) - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the number of PHYs as specified in *phys* property. - ti,hwmods : Name of the hwmod associated to the pcie, "pcie", where is the instance number of the pcie from the HW spec. - num-lanes as specified in ../designware-pcie.txt + - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control + module and the register offset to specify lane + selection. HOST MODE ========= diff --git a/Bindings/phy/cdns,dphy.txt b/Bindings/phy/cdns,dphy.txt new file mode 100644 index 000000000000..1095bc4e72d9 --- /dev/null +++ b/Bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + }; diff --git a/Bindings/phy/phy-armada38x-comphy.txt b/Bindings/phy/phy-armada38x-comphy.txt new file mode 100644 index 000000000000..ad49e5c01334 --- /dev/null +++ b/Bindings/phy/phy-armada38x-comphy.txt @@ -0,0 +1,40 @@ +mvebu armada 38x comphy driver +------------------------------ + +This comphy controller can be found on Marvell Armada 38x. It provides a +number of shared PHYs used by various interfaces (network, sata, usb, +PCIe...). + +Required properties: + +- compatible: should be "marvell,armada-380-comphy" +- reg: should contain the comphy register location and length. +- #address-cells: should be 1. +- #size-cells: should be 0. + +A sub-node is required for each comphy lane provided by the comphy. + +Required properties (child nodes): + +- reg: comphy lane number. +- #phy-cells : from the generic phy bindings, must be 1. Defines the + input port to use for a given comphy lane. + +Example: + + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + }; diff --git a/Bindings/phy/phy-mvebu-comphy.txt b/Bindings/phy/phy-mvebu-comphy.txt index bfcf80341657..cf2cd86db267 100644 --- a/Bindings/phy/phy-mvebu-comphy.txt +++ b/Bindings/phy/phy-mvebu-comphy.txt @@ -1,16 +1,27 @@ -mvebu comphy driver -------------------- +MVEBU comphy drivers +-------------------- -A comphy controller can be found on Marvell Armada 7k/8k on the CP110. It -provides a number of shared PHYs used by various interfaces (network, sata, -usb, PCIe...). +COMPHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 7k/8k (on the CP110) +* Armada 3700 +It provides a number of shared PHYs used by various interfaces (network, SATA, +USB, PCIe...). Required properties: -- compatible: should be "marvell,comphy-cp110" -- reg: should contain the comphy register location and length. -- marvell,system-controller: should contain a phandle to the - system controller node. +- compatible: should be one of: + * "marvell,comphy-cp110" for Armada 7k/8k + * "marvell,comphy-a3700" for Armada 3700 +- reg: should contain the COMPHY register(s) location(s) and length(s). + * 1 entry for Armada 7k/8k + * 4 entries for Armada 3700 along with the corresponding reg-names + properties, memory areas are: + * Generic COMPHY registers + * Lane 1 (PCIe/GbE) + * Lane 0 (USB3/GbE) + * Lane 2 (SATA/USB3) +- marvell,system-controller: should contain a phandle to the system + controller node (only for Armada 7k/8k) - #address-cells: should be 1. - #size-cells: should be 0. @@ -18,11 +29,11 @@ A sub-node is required for each comphy lane provided by the comphy. Required properties (child nodes): -- reg: comphy lane number. -- #phy-cells : from the generic phy bindings, must be 1. Defines the +- reg: COMPHY lane number. +- #phy-cells : from the generic PHY bindings, must be 1. Defines the input port to use for a given comphy lane. -Example: +Examples: cpm_comphy: phy@120000 { compatible = "marvell,comphy-cp110"; @@ -41,3 +52,33 @@ Example: #phy-cells = <1>; }; }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; diff --git a/Bindings/phy/phy-mvebu-utmi.txt b/Bindings/phy/phy-mvebu-utmi.txt new file mode 100644 index 000000000000..aa99ceec73b0 --- /dev/null +++ b/Bindings/phy/phy-mvebu-utmi.txt @@ -0,0 +1,38 @@ +MVEBU A3700 UTMI PHY +-------------------- + +USB2 UTMI+ PHY controllers can be found on the following Marvell MVEBU SoCs: +* Armada 3700 + +On Armada 3700, there are two USB controllers, one is compatible with the USB2 +and USB3 specifications and supports OTG. The other one is USB2 compliant and +only supports host mode. Both of these controllers come with a slightly +different UTMI PHY. + +Required Properties: + +- compatible: Should be one of: + * "marvell,a3700-utmi-host-phy" for the PHY connected to + the USB2 host-only controller. + * "marvell,a3700-utmi-otg-phy" for the PHY connected to + the USB3 and USB2 OTG capable controller. +- reg: PHY IP register range. +- marvell,usb-misc-reg: handle on the "USB miscellaneous registers" shared + region covering registers related to both the host + controller and the PHY. +- #phy-cells: Standard property (Documentation: phy-bindings.txt) Should be 0. + + +Example: + + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,armada-3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", "syscon"; + reg = <0x5f800 0x800>; + }; diff --git a/Bindings/phy/phy-rockchip-inno-usb2.txt b/Bindings/phy/phy-rockchip-inno-usb2.txt index 074a7b3b0425..00639baae74a 100644 --- a/Bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Bindings/phy/phy-rockchip-inno-usb2.txt @@ -23,6 +23,8 @@ Optional properties: register files". When set driver will request its phandle as one companion-grf for some special SoCs (e.g RV1108). + - extcon : phandle to the extcon device providing the cable state for + the otg phy. Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify host or otg port, diff --git a/Bindings/phy/qcom-qmp-phy.txt b/Bindings/phy/qcom-qmp-phy.txt index 41a1074228ba..5d181fc3cc18 100644 --- a/Bindings/phy/qcom-qmp-phy.txt +++ b/Bindings/phy/qcom-qmp-phy.txt @@ -9,6 +9,8 @@ Required properties: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, + "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998, + "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998, "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845, "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845, "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845. @@ -42,6 +44,10 @@ Required properties: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,msm8998-qmp-usb3-phy" must contain: + "aux", "cfg_ahb", "ref". + For "qcom,msm8998-qmp-ufs-phy" must contain: + "ref", "ref_aux". For "qcom,sdm845-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref", "com_aux". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: @@ -61,6 +67,9 @@ Required properties: "phy", "common", "cfg". For "qcom,msm8996-qmp-usb3-phy" must contain "phy", "common". + For "qcom,msm8998-qmp-usb3-phy" must contain + "phy", "common". + For "qcom,msm8998-qmp-ufs-phy": no resets are listed. For "qcom,sdm845-qmp-usb3-phy" must contain: "phy", "common". For "qcom,sdm845-qmp-usb3-uni-phy" must contain: diff --git a/Bindings/phy/qcom-qusb2-phy.txt b/Bindings/phy/qcom-qusb2-phy.txt index 03025d97998b..fe29f9e0af6d 100644 --- a/Bindings/phy/qcom-qusb2-phy.txt +++ b/Bindings/phy/qcom-qusb2-phy.txt @@ -6,6 +6,7 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - compatible: compatible list, contains "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, + "qcom,msm8998-qusb2-phy" for 10nm PHY on msm8998, "qcom,sdm845-qusb2-phy" for 10nm PHY on sdm845. - reg: offset and length of the PHY register set. diff --git a/Bindings/phy/rcar-gen3-phy-usb2.txt b/Bindings/phy/rcar-gen3-phy-usb2.txt index de7b5393c163..ad9c290d8f15 100644 --- a/Bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Bindings/phy/rcar-gen3-phy-usb2.txt @@ -5,6 +5,8 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 + SoC. + "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0 SoC. "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 SoC. diff --git a/Bindings/phy/ti-phy.txt b/Bindings/phy/ti-phy.txt index 57dfda8a7a1d..8f93c3b694a7 100644 --- a/Bindings/phy/ti-phy.txt +++ b/Bindings/phy/ti-phy.txt @@ -35,6 +35,7 @@ Required properties: DRA7x Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY in DRA7x + Should be "ti,am654-usb2" for the USB2 PHYs on AM654. - reg : Address and length of the register set for the device. - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. diff --git a/Bindings/pinctrl/atmel,at91-pinctrl.txt b/Bindings/pinctrl/atmel,at91-pinctrl.txt index 3e23fece99da..eb39f5051159 100644 --- a/Bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Bindings/pinctrl/atmel,at91-pinctrl.txt @@ -19,7 +19,7 @@ such as pull-up, multi drive, etc. Required properties for iomux controller: - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl" - or "atmel,sama5d3-pinctrl" + or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl" - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be configured in this periph mode. All the periph and bank need to be describe. @@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 11 - High OUTPUT (1 << 7): indicate this pin need to be configured as an output. OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) +SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. @@ -116,6 +117,19 @@ Some requirements for using atmel,at91rm9200-pinctrl binding: configurations by referring to the phandle of that pin configuration node. 4. The gpio controller must be describe in the pinctrl simple-bus. +For each bank the required properties are: +- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or + "microchip,sam9x60-gpio" +- reg: physical base address and length of the controller's registers +- interrupts: interrupt outputs from the controller +- interrupt-controller: marks the device node as an interrupt controller +- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt + for more details. +- gpio-controller +- #gpio-cells: should be 2; the first cell is the GPIO number and the second + cell specifies GPIO flags as defined in . +- clocks: bank clock + Examples: pinctrl@fffff400 { @@ -125,6 +139,17 @@ pinctrl@fffff400 { compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; reg = <0xfffff400 0x600>; + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; + }; + atmel,mux-mask = < /* A B */ 0xffffffff 0xffc00c3b /* pioA */ diff --git a/Bindings/pinctrl/fsl,imx50-pinctrl.txt b/Bindings/pinctrl/fsl,imx50-pinctrl.txt new file mode 100644 index 000000000000..6da01d619d33 --- /dev/null +++ b/Bindings/pinctrl/fsl,imx50-pinctrl.txt @@ -0,0 +1,32 @@ +* Freescale IMX50 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx50-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = , PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx50 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_HVE (1 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE (1 << 3) +PAD_CTL_DSE_LOW (0 << 1) +PAD_CTL_DSE_MED (1 << 1) +PAD_CTL_DSE_HIGH (2 << 1) +PAD_CTL_DSE_MAX (3 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx50-pinfunc.h in device tree source folder for all available +imx50 PIN_FUNC_ID. diff --git a/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt new file mode 100644 index 000000000000..524a16fca666 --- /dev/null +++ b/Bindings/pinctrl/fsl,imx8mm-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale IMX8MM IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory +for common binding part and usage. + +Required properties: +- compatible: "fsl,imx8mm-iomuxc" +- reg: should contain the base physical address and size of the iomuxc + registers. + +Required properties in sub-nodes: +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers are specified using a PIN_FUNC_ID macro, which can be found in + . The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX8M Mini + Reference Manual for detailed CONFIG settings. + +Examples: + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mm-iomuxc"; + reg = <0x0 0x30330000 0x0 0x10000>; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + >; + }; +}; diff --git a/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index c7c088d2dd50..38dc56a57760 100644 --- a/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -58,11 +58,11 @@ group pwm3 - functions pwm, gpio group pmic1 - - pin 17 + - pin 7 - functions pmic, gpio group pmic0 - - pin 16 + - pin 6 - functions pmic, gpio group i2c2 @@ -112,19 +112,31 @@ group usb2_drvvbus1 - functions drvbus, gpio group sdio_sb - - pins 60-64 + - pins 60-65 - functions sdio, gpio group rgmii - - pins 42-55 + - pins 42-53 - functions mii, gpio group pcie1 - - pins 39-40 + - pins 39 - functions pcie, gpio +group pcie1_clkreq + - pins 40 + - functions pcie, gpio + +group pcie1_wakeup + - pins 41 + - functions pcie, gpio + +group smi + - pins 54-55 + - functions smi, gpio + group ptp - - pins 56-58 + - pins 56 - functions ptp, gpio group ptp_clk diff --git a/Bindings/pinctrl/meson,pinctrl.txt b/Bindings/pinctrl/meson,pinctrl.txt index 82ead40311f6..a47dd990a8d3 100644 --- a/Bindings/pinctrl/meson,pinctrl.txt +++ b/Bindings/pinctrl/meson,pinctrl.txt @@ -23,11 +23,11 @@ The GPIO bank for the controller is represented as a sub-node and it acts as a GPIO controller. Required properties for sub-nodes are: - - reg: should contain address and size for mux, pull-enable, pull and - gpio register sets - - reg-names: an array of strings describing the "reg" entries. Must - contain "mux", "pull" and "gpio". "pull-enable" is optional and - when it is missing the "pull" registers are used instead + - reg: should contain a list of address and size, one tuple for each entry + in reg-names. + - reg-names: an array of strings describing the "reg" entries. + Must contain "mux" and "gpio". + May contain "pull", "pull-enable" and "ds" when appropriate. - gpio-controller: identifies the node as a gpio controller - #gpio-cells: must be 2 diff --git a/Bindings/pinctrl/qcom,pmic-gpio.txt b/Bindings/pinctrl/qcom,pmic-gpio.txt index 759aa1732e48..7f64a7e92c28 100644 --- a/Bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Bindings/pinctrl/qcom,pmic-gpio.txt @@ -19,6 +19,7 @@ PMIC's from Qualcomm. "qcom,pm8998-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" + "qcom,pmi8998-gpio" "qcom,pms405-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" diff --git a/Bindings/power/fsl,imx-gpcv2.txt b/Bindings/power/fsl,imx-gpcv2.txt index 7c947a996df1..7c7e972aaa42 100644 --- a/Bindings/power/fsl,imx-gpcv2.txt +++ b/Bindings/power/fsl,imx-gpcv2.txt @@ -32,6 +32,9 @@ Required properties: Optional properties: - power-supply: Power supply used to power the domain +- clocks: a number of phandles to clocks that need to be enabled during + domain power-up sequencing to ensure reset propagation into devices + located inside this power domain Example: diff --git a/Bindings/power/qcom,rpmpd.txt b/Bindings/power/qcom,rpmpd.txt new file mode 100644 index 000000000000..980e5413d18f --- /dev/null +++ b/Bindings/power/qcom,rpmpd.txt @@ -0,0 +1,145 @@ +Qualcomm RPM/RPMh Power domains + +For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh +which then translates it into a corresponding voltage on a rail + +Required Properties: + - compatible: Should be one of the following + * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC + * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC + - #power-domain-cells: number of cells in Power domain specifier + must be 1. + - operating-points-v2: Phandle to the OPP table for the Power domain. + Refer to Documentation/devicetree/bindings/power/power_domain.txt + and Documentation/devicetree/bindings/opp/opp.txt for more details + +Refer to for the level values for +various OPPs for different platforms as well as Power domain indexes + +Example: rpmh power domain controller and OPP table + +#include + +opp-level values specified in the OPP tables for RPMh power domains +should use the RPMH_REGULATOR_LEVEL_* constants from + + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + +Example: rpm power domain controller and OPP table + + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_low: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_ret: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_normal: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_high: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + +Example: Client/Consumer device using OPP table + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&rpmhpd SDM845_MX>; + operating-points-v2 = <&leaky_opp_table>; + }; + + + leaky_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp1 { + opp-hz = /bits/ 64 <144000>; + required-opps = <&rpmhpd_opp_low>; + }; + + opp2 { + opp-hz = /bits/ 64 <400000>; + required-opps = <&rpmhpd_opp_ret>; + }; + + opp3 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp4 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_normal>; + }; + }; diff --git a/Bindings/power/reset/xlnx,zynqmp-power.txt b/Bindings/power/reset/xlnx,zynqmp-power.txt new file mode 100644 index 000000000000..d366f1eb623a --- /dev/null +++ b/Bindings/power/reset/xlnx,zynqmp-power.txt @@ -0,0 +1,25 @@ +-------------------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management +-------------------------------------------------------------------- +The zynqmp-power node describes the power management configurations. +It will control remote suspend/shutdown interfaces. + +Required properties: + - compatible: Must contain: "xlnx,zynqmp-power" + - interrupts: Interrupt specifier + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; +}; diff --git a/Bindings/power/supply/battery.txt b/Bindings/power/supply/battery.txt index 89871ab8c704..5c913d4cf36c 100644 --- a/Bindings/power/supply/battery.txt +++ b/Bindings/power/supply/battery.txt @@ -16,6 +16,7 @@ Required Properties: Optional Properties: - voltage-min-design-microvolt: drained battery voltage + - voltage-max-design-microvolt: fully charged battery voltage - energy-full-design-microwatt-hours: battery design energy - charge-full-design-microamp-hours: battery design capacity - precharge-current-microamp: current for pre-charge phase @@ -48,6 +49,7 @@ Example: bat: battery { compatible = "simple-battery"; voltage-min-design-microvolt = <3200000>; + voltage-max-design-microvolt = <4200000>; energy-full-design-microwatt-hours = <5290000>; charge-full-design-microamp-hours = <1430000>; precharge-current-microamp = <256000>; diff --git a/Bindings/power/supply/sc27xx-fg.txt b/Bindings/power/supply/sc27xx-fg.txt index fc35ac577401..0a5705b8b592 100644 --- a/Bindings/power/supply/sc27xx-fg.txt +++ b/Bindings/power/supply/sc27xx-fg.txt @@ -9,8 +9,8 @@ Required properties: "sprd,sc2731-fgu". - reg: The address offset of fuel gauge unit. - battery-detect-gpios: GPIO for battery detection. -- io-channels: Specify the IIO ADC channel to get temperature. -- io-channel-names: Should be "bat-temp". +- io-channels: Specify the IIO ADC channels to get temperature and charge voltage. +- io-channel-names: Should be "bat-temp" or "charge-vol". - nvmem-cells: A phandle to the calibration cells provided by eFuse device. - nvmem-cell-names: Should be "fgu_calib". - monitored-battery: Phandle of battery characteristics devicetree node. @@ -47,8 +47,8 @@ Example: compatible = "sprd,sc2731-fgu"; reg = <0xa00>; battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; - io-channels = <&pmic_adc 5>; - io-channel-names = "bat-temp"; + io-channels = <&pmic_adc 5>, <&pmic_adc 14>; + io-channel-names = "bat-temp", "charge-vol"; nvmem-cells = <&fgu_calib>; nvmem-cell-names = "fgu_calib"; monitored-battery = <&bat>; diff --git a/Bindings/power/xlnx,zynqmp-genpd.txt b/Bindings/power/xlnx,zynqmp-genpd.txt new file mode 100644 index 000000000000..8d1b8200ebd0 --- /dev/null +++ b/Bindings/power/xlnx,zynqmp-genpd.txt @@ -0,0 +1,34 @@ +----------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC PM domains +----------------------------------------------------------- +The binding for zynqmp-power-controller follow the common +generic PM domain binding[1]. + +[1] Documentation/devicetree/bindings/power/power_domain.txt + +== Zynq MPSoC Generic PM Domain Node == + +Required property: + - Below property should be in zynqmp-firmware node. + - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1. + +Power domain ID indexes are mentioned in +include/dt-bindings/power/xlnx-zynqmp-power.h. + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + ... + #power-domain-cells = <1>; + ... + }; +}; + +sata { + ... + power-domains = <&zynqmp_firmware 28>; + ... +}; diff --git a/Bindings/property-units.txt b/Bindings/property-units.txt index 45ce054d844d..bfd33734faca 100644 --- a/Bindings/property-units.txt +++ b/Bindings/property-units.txt @@ -31,6 +31,7 @@ Electricity -microwatt-hours: micro Watt-hours -microvolt : micro volts -picofarads : picofarads +-femtofarads : femtofarads Temperature ---------------------------------------- diff --git a/Bindings/ptp/ptp-qoriq.txt b/Bindings/ptp/ptp-qoriq.txt index c5d0e7998e2b..454c937076a2 100644 --- a/Bindings/ptp/ptp-qoriq.txt +++ b/Bindings/ptp/ptp-qoriq.txt @@ -17,6 +17,11 @@ Clock Properties: - fsl,tmr-fiper1 Fixed interval period pulse generator. - fsl,tmr-fiper2 Fixed interval period pulse generator. - fsl,max-adj Maximum frequency adjustment in parts per billion. + - fsl,extts-fifo The presence of this property indicates hardware + support for the external trigger stamp FIFO. + - little-endian The presence of this property indicates the 1588 timer + IP block is little-endian mode. The default endian mode + is big-endian. These properties set the operational parameters for the PTP clock. You must choose these carefully for the clock to work right. diff --git a/Bindings/pwm/atmel-pwm.txt b/Bindings/pwm/atmel-pwm.txt index c8c831d7b0d1..591ecdd39c7b 100644 --- a/Bindings/pwm/atmel-pwm.txt +++ b/Bindings/pwm/atmel-pwm.txt @@ -5,6 +5,7 @@ Required properties: - "atmel,at91sam9rl-pwm" - "atmel,sama5d3-pwm" - "atmel,sama5d2-pwm" + - "microchip,sam9x60-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/Bindings/pwm/pwm-hibvt.txt b/Bindings/pwm/pwm-hibvt.txt index fa7849d67836..daedfef09bb6 100644 --- a/Bindings/pwm/pwm-hibvt.txt +++ b/Bindings/pwm/pwm-hibvt.txt @@ -5,6 +5,8 @@ Required properties: The SoC specific strings supported including: "hisilicon,hi3516cv300-pwm" "hisilicon,hi3519v100-pwm" + "hisilicon,hi3559v100-shub-pwm" + "hisilicon,hi3559v100-pwm - reg: physical base address and length of the controller's registers. - clocks: phandle and clock specifier of the PWM reference clock. - resets: phandle and reset specifier for the PWM controller reset. diff --git a/Bindings/regulator/fan53555.txt b/Bindings/regulator/fan53555.txt index 54a3f2c80e3a..e7fc045281d1 100644 --- a/Bindings/regulator/fan53555.txt +++ b/Bindings/regulator/fan53555.txt @@ -1,7 +1,8 @@ Binding for Fairchild FAN53555 regulators Required properties: - - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828" + - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or + "silergy,syr828" - reg: I2C address Optional properties: diff --git a/Bindings/regulator/fixed-regulator.txt b/Bindings/regulator/fixed-regulator.txt deleted file mode 100644 index 0c2a6c8a1536..000000000000 --- a/Bindings/regulator/fixed-regulator.txt +++ /dev/null @@ -1,35 +0,0 @@ -Fixed Voltage regulators - -Required properties: -- compatible: Must be "regulator-fixed"; -- regulator-name: Defined in regulator.txt as optional, but required here. - -Optional properties: -- gpio: gpio to use for enable control -- startup-delay-us: startup time in microseconds -- enable-active-high: Polarity of GPIO is Active high -If this property is missing, the default assumed is Active low. -- gpio-open-drain: GPIO is open drain type. - If this property is missing then default assumption is false. --vin-supply: Input supply name. - -Any property defined as part of the core regulator -binding, defined in regulator.txt, can also be used. -However a fixed voltage regulator is expected to have the -regulator-min-microvolt and regulator-max-microvolt -to be the same. - -Example: - - abc: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 16 0>; - startup-delay-us = <70000>; - enable-active-high; - regulator-boot-on; - gpio-open-drain; - vin-supply = <&parent_reg>; - }; diff --git a/Bindings/regulator/fixed-regulator.yaml b/Bindings/regulator/fixed-regulator.yaml new file mode 100644 index 000000000000..d289c2f7455a --- /dev/null +++ b/Bindings/regulator/fixed-regulator.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fixed Voltage regulators + +maintainers: + - Liam Girdwood + - Mark Brown + +description: + Any property defined as part of the core regulator binding, defined in + regulator.txt, can also be used. However a fixed voltage regulator is + expected to have the regulator-min-microvolt and regulator-max-microvolt + to be the same. + +properties: + compatible: + const: regulator-fixed + + regulator-name: true + + gpio: + description: gpio to use for enable control + maxItems: 1 + + startup-delay-us: + description: startup time in microseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + enable-active-high: + description: + Polarity of GPIO is Active high. If this property is missing, + the default assumed is Active low. + type: boolean + + gpio-open-drain: + description: + GPIO is open drain type. If this property is missing then default + assumption is false. + type: boolean + + vin-supply: + description: Input supply phandle. + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - regulator-name + +examples: + - | + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 0>; + startup-delay-us = <70000>; + enable-active-high; + regulator-boot-on; + gpio-open-drain; + vin-supply = <&parent_reg>; + }; +... diff --git a/Bindings/regulator/max77650-regulator.txt b/Bindings/regulator/max77650-regulator.txt new file mode 100644 index 000000000000..f1cbe813c30f --- /dev/null +++ b/Bindings/regulator/max77650-regulator.txt @@ -0,0 +1,41 @@ +Regulator driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The regulator controller is represented as a sub-node of the PMIC node +on the device tree. + +The device has a single LDO regulator and a SIMO buck-boost regulator with +three independent power rails. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-regulator" + +Each rail must be instantiated under the regulators subnode of the top PMIC +node. Up to four regulators can be defined. For standard regulator properties +refer to Documentation/devicetree/bindings/regulator/regulator.txt. + +Available regulator compatible strings are: "ldo", "sbb0", "sbb1", "sbb2". + +Example: +-------- + + regulators { + compatible = "maxim,max77650-regulator"; + + max77650_ldo: regulator@0 { + regulator-compatible = "ldo"; + regulator-name = "max77650-ldo"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <2937500>; + }; + + max77650_sbb0: regulator@1 { + regulator-compatible = "sbb0"; + regulator-name = "max77650-sbb0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1587500>; + }; + }; diff --git a/Bindings/regulator/pfuze100.txt b/Bindings/regulator/pfuze100.txt index f9be1acf891c..4d3b12b92cb3 100644 --- a/Bindings/regulator/pfuze100.txt +++ b/Bindings/regulator/pfuze100.txt @@ -8,7 +8,7 @@ Optional properties: - fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch regulators to save power consumption. Attention, ensure that all important regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" - property. If not present, the switched regualtors are always on and can't be + property. If not present, the switched regulators are always on and can't be disabled. This binding is a workaround to keep backward compatibility with old dtb's which rely on the fact that the switched regulators are always on and don't mark them explicit as "regulator-always-on". diff --git a/Bindings/regulator/rohm,bd70528-regulator.txt b/Bindings/regulator/rohm,bd70528-regulator.txt new file mode 100644 index 000000000000..698cfc3bc3dd --- /dev/null +++ b/Bindings/regulator/rohm,bd70528-regulator.txt @@ -0,0 +1,68 @@ +ROHM BD70528 Power Management Integrated Circuit regulator bindings + +Required properties: + - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3", + "led_ldo1", "led_ldo2" + +List of regulators provided by this controller. BD70528 regulators node +should be sub node of the BD70528 MFD node. See BD70528 MFD bindings at +Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt + +The valid names for BD70528 regulator nodes are: +BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: +regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <125>; + }; + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-ramp-delay = <250>; + }; + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + led_ldo1: LED_LDO1 { + regulator-name = "led_ldo1"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; + led_ldo2: LED_LDO2 { + regulator-name = "led_ldo2"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <300000>; + }; +}; diff --git a/Bindings/regulator/rohm,bd71837-regulator.txt b/Bindings/regulator/rohm,bd71837-regulator.txt index 4b98ca26e61a..cbce62c22b60 100644 --- a/Bindings/regulator/rohm,bd71837-regulator.txt +++ b/Bindings/regulator/rohm,bd71837-regulator.txt @@ -27,8 +27,38 @@ BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6 LDO1, LDO2, LDO3, LDO4, LDO5, LDO6 Optional properties: +- rohm,dvs-run-voltage : PMIC default "RUN" state voltage in uV. + See below table for bucks which support this. +- rohm,dvs-idle-voltage : PMIC default "IDLE" state voltage in uV. + See below table for bucks which support this. +- rohm,dvs-suspend-voltage : PMIC default "SUSPEND" state voltage in uV. + See below table for bucks which support this. - Any optional property defined in bindings/regulator/regulator.txt +Supported default DVS states: + +BD71837: +buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage +----------------------------------------------------------------------------- +1 | supported | supported | supported +---------------------------------------------------------------------------- +2 | supported | supported | not supported +---------------------------------------------------------------------------- +3 | supported | not supported | not supported +---------------------------------------------------------------------------- +4 | supported | not supported | not supported +---------------------------------------------------------------------------- +rest | not supported | not supported | not supported + +BD71847: +buck | dvs-run-voltage | dvs-idle-voltage | dvs-suspend-voltage +----------------------------------------------------------------------------- +1 | supported | supported | supported +---------------------------------------------------------------------------- +2 | supported | supported | not supported +---------------------------------------------------------------------------- +rest | not supported | not supported | not supported + Example: regulators { buck1: BUCK1 { @@ -36,7 +66,11 @@ regulators { regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; }; buck2: BUCK2 { regulator-name = "buck2"; @@ -45,18 +79,22 @@ regulators { regulator-boot-on; regulator-always-on; regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; }; buck3: BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; }; buck4: BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; }; buck5: BUCK5 { regulator-name = "buck5"; diff --git a/Bindings/regulator/st,stpmic1-regulator.txt b/Bindings/regulator/st,stpmic1-regulator.txt index a3f476240565..6189df71ea98 100644 --- a/Bindings/regulator/st,stpmic1-regulator.txt +++ b/Bindings/regulator/st,stpmic1-regulator.txt @@ -23,16 +23,14 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator, if not set, the driver only sends an over-current event. -- interrupt-parent: phandle to the parent interrupt controller - interrupts: index of current limit detection interrupt - -supply: phandle to the parent supply/regulator node each regulator supply can be described except vref_ddr. +- regulator-active-discharge: can be used on pwr_sw1 and pwr_sw2. Example: regulators { @@ -43,7 +41,6 @@ regulators { vdd_core: buck1 { regulator-name = "vdd_core"; interrupts = ; - interrupt-parent = <&pmic>; st,mask-reset; regulator-pull-down; regulator-min-microvolt = <700000>; @@ -53,7 +50,6 @@ regulators { v3v3: buck4 { regulator-name = "v3v3"; interrupts = ; - interrupt-parent = <&mypmic>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/Bindings/regulator/tps65218.txt b/Bindings/regulator/tps65218.txt index 02f0e9bbfbf8..54aded3b78e2 100644 --- a/Bindings/regulator/tps65218.txt +++ b/Bindings/regulator/tps65218.txt @@ -71,8 +71,13 @@ tps65218: tps65218@24 { regulator-always-on; }; + ls2: regulator-ls2 { + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; + }; + ls3: regulator-ls3 { - regulator-min-microvolt = <100000>; - regulator-max-microvolt = <1000000>; + regulator-min-microamp = <100000>; + regulator-max-microamp = <1000000>; }; }; diff --git a/Bindings/remoteproc/qcom,adsp-pil.txt b/Bindings/remoteproc/qcom,adsp-pil.txt index a842a782b557..66af2c30944f 100644 --- a/Bindings/remoteproc/qcom,adsp-pil.txt +++ b/Bindings/remoteproc/qcom,adsp-pil.txt @@ -35,7 +35,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core. Value type: Definition: List of clock input name strings sorted in the same order as the clocks property. Definition must have - "xo", "sway_cbcr", "lpass_aon", "lpass_ahbs_aon_cbcr", + "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep" and "qdsp6ss_core". @@ -100,13 +100,12 @@ ADSP, as it is found on SDM845 boards. clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_LPASS_SWAY_CLK>, - <&lpasscc LPASS_AUDIO_WRAPPER_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>, <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>, <&lpasscc LPASS_QDSP6SS_XO_CLK>, <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>, <&lpasscc LPASS_QDSP6SS_CORE_CLK>; - clock-names = "xo", "sway_cbcr", "lpass_aon", + clock-names = "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr", "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core"; diff --git a/Bindings/remoteproc/qcom,adsp.txt b/Bindings/remoteproc/qcom,adsp.txt index 9c0cff3a5ed8..292dfda9770d 100644 --- a/Bindings/remoteproc/qcom,adsp.txt +++ b/Bindings/remoteproc/qcom,adsp.txt @@ -19,13 +19,30 @@ on the Qualcomm ADSP Hexagon core. - interrupts-extended: Usage: required Value type: - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the compatible + string: + qcom,msm8974-adsp-pil: + qcom,msm8996-adsp-pil: + qcom,msm8996-slpi-pil: + qcom,qcs404-adsp-pas: + qcom,qcs404-cdsp-pas: + qcom,sdm845-adsp-pas: + qcom,sdm845-cdsp-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,qcs404-wcss-pas: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: + Definition: must list the relative firmware image path for the + Hexagon Core. - clocks: Usage: required diff --git a/Bindings/remoteproc/qcom,q6v5.txt b/Bindings/remoteproc/qcom,q6v5.txt index 9ff5b0309417..41ca5df5be5a 100644 --- a/Bindings/remoteproc/qcom,q6v5.txt +++ b/Bindings/remoteproc/qcom,q6v5.txt @@ -28,24 +28,51 @@ on the Qualcomm Hexagon core. - interrupts-extended: Usage: required Value type: - Definition: must list the watchdog, fatal IRQs ready, handover and - stop-ack IRQs + Definition: reference to the interrupts that match interrupt-names - interrupt-names: Usage: required Value type: - Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + Definition: The interrupts needed depends on the the compatible + string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack" + qcom,msm8996-mss-pil: + qcom,sdm845-mss-pil: + must be "wdog", "fatal", "ready", "handover", "stop-ack", + "shutdown-ack" + +- firmware-name: + Usage: optional + Value type: + Definition: must list the relative firmware image paths for mba and + modem. They are used for booting and authenticating the + Hexagon core. - clocks: Usage: required Value type: - Definition: reference to the iface, bus and mem clocks to be held on - behalf of the booting of the Hexagon core + Definition: reference to the clocks that match clock-names - clock-names: Usage: required Value type: - Definition: must be "iface", "bus", "mem" + Definition: The clocks needed depend on the compatible string: + qcom,ipq8074-wcss-pil: + no clock names required + qcom,q6v5-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + must be "iface", "bus", "mem", "xo" + qcom,msm8996-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss" + qcom,sdm845-mss-pil: + must be "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng" - resets: Usage: required @@ -65,6 +92,19 @@ on the Qualcomm Hexagon core. must be "mss_restart", "pdc_reset" for the modem sub-system on SDM845 SoCs +For the compatible strings below the following supplies are required: + "qcom,q6v5-pil" + "qcom,msm8916-mss-pil", +- cx-supply: +- mx-supply: +- pll-supply: + Usage: required + Value type: + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: + "qcom,msm8974-mss-pil" - cx-supply: - mss-supply: - mx-supply: @@ -74,6 +114,33 @@ on the Qualcomm Hexagon core. Definition: reference to the regulators to be held on behalf of the booting of the Hexagon core +For the compatible string below the following supplies are required: + "qcom,msm8996-mss-pil" +- pll-supply: + Usage: required + Value type: + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +- power-domains: + Usage: required + Value type: + Definition: reference to power-domains that match power-domain-names + +- power-domain-names: + Usage: required + Value type: + Definition: The power-domains needed depend on the compatible string: + qcom,q6v5-pil: + qcom,ipq8074-wcss-pil: + qcom,msm8916-mss-pil: + qcom,msm8974-mss-pil: + no power-domain names required + qcom,msm8996-mss-pil: + must be "cx", "mx" + qcom,sdm845-mss-pil: + must be "cx", "mx", "mss", "load_state" + - qcom,smem-states: Usage: required Value type: diff --git a/Bindings/reset/brcm,brcmstb-reset.txt b/Bindings/reset/brcm,brcmstb-reset.txt new file mode 100644 index 000000000000..6e5341b4f891 --- /dev/null +++ b/Bindings/reset/brcm,brcmstb-reset.txt @@ -0,0 +1,27 @@ +Broadcom STB SW_INIT-style reset controller +=========================================== + +Broadcom STB SoCs have a SW_INIT-style reset controller with separate +SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit +reset lines. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: should be brcm,brcmstb-reset +- reg: register base and length +- #reset-cells: must be set to 1 + +Example: + + reset: reset-controller@8404318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x8404318 0x30>; + #reset-cells = <1>; + }; + + ðernet_switch { + resets = <&reset>; + reset-names = "switch"; + }; diff --git a/Bindings/reset/fsl,imx7-src.txt b/Bindings/reset/fsl,imx7-src.txt index 1ab1d109318e..2ecf33815d18 100644 --- a/Bindings/reset/fsl,imx7-src.txt +++ b/Bindings/reset/fsl,imx7-src.txt @@ -5,7 +5,9 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "fsl,imx7d-src", "syscon" +- compatible: + - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" + - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -44,4 +46,5 @@ Example: For list of all valid reset indicies see - + for i.MX7 and + for i.MX8MQ diff --git a/Bindings/reset/xlnx,zynqmp-reset.txt b/Bindings/reset/xlnx,zynqmp-reset.txt new file mode 100644 index 000000000000..27a45fe5ecf1 --- /dev/null +++ b/Bindings/reset/xlnx,zynqmp-reset.txt @@ -0,0 +1,52 @@ +-------------------------------------------------------------------------- + = Zynq UltraScale+ MPSoC reset driver binding = +-------------------------------------------------------------------------- +The Zynq UltraScale+ MPSoC has several different resets. + +See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information +about zynqmp resets. + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: "xlnx,zynqmp-reset" +- #reset-cells: Specifies the number of cells needed to encode reset + line, should be 1 + +------- +Example +------- + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_reset: reset-controller { + compatible = "xlnx,zynqmp-reset"; + #reset-cells = <1>; + }; + }; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see + + +Example: + +serdes: zynqmp_phy@fd400000 { + ... + + resets = <&zynqmp_reset ZYNQMP_RESET_SATA>; + reset-names = "sata_rst"; + + ... +}; diff --git a/Bindings/rtc/abracon,abx80x.txt b/Bindings/rtc/abracon,abx80x.txt index 18b892d010d8..2405e35a1bc0 100644 --- a/Bindings/rtc/abracon,abx80x.txt +++ b/Bindings/rtc/abracon,abx80x.txt @@ -16,6 +16,7 @@ Required properties: "abracon,ab1803" "abracon,ab1804" "abracon,ab1805" + "microcrystal,rv1805" Using "abracon,abx80x" will enable chip autodetection. - "reg": I2C bus address of the device diff --git a/Bindings/rtc/cdns,rtc.txt b/Bindings/rtc/cdns,rtc.txt new file mode 100644 index 000000000000..14a04487b432 --- /dev/null +++ b/Bindings/rtc/cdns,rtc.txt @@ -0,0 +1,25 @@ +Cadence Real Time Clock + +The Cadence RTC controller with date, time and alarm capabilities. +The alarm may wake the system from low-power state. + +Required properties: +- compatible: Should be "cdns,rtc-r109v3" +- reg: Specifies base physical address and size of the register area. +- interrupts: A single interrupt specifier. +- clocks: Must contain two entries: + - pclk: APB registers clock + - ref_clk: reference 1Hz or 100Hz clock, depending on IP configuration + See ../clocks/clock-bindings.txt for details. + +Example: + rtc0: rtc@fd080000 { + compatible = "cdns,rtc-r109v3"; + reg = <0xfd080000 0x1000>; + + clock-names = "pclk", "ref_clk"; + clocks = <&sysclock>, <&refclock>; + + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Bindings/rtc/isil,isl1208.txt b/Bindings/rtc/isil,isl1208.txt new file mode 100644 index 000000000000..51f003006f04 --- /dev/null +++ b/Bindings/rtc/isil,isl1208.txt @@ -0,0 +1,38 @@ +Intersil ISL1209/19 I2C RTC/Alarm chip with event in + +ISL12X9 have additional pins EVIN and #EVDET for tamper detection, while the +ISL1208 and ISL1218 do not. They are all use the same driver with the bindings +described here, with chip specific properties as noted. + +Required properties supported by the device: + - "compatible": Should be one of the following: + - "isil,isl1208" + - "isil,isl1209" + - "isil,isl1218" + - "isil,isl1219" + - "reg": I2C bus address of the device + +Optional properties: + - "interrupt-names": list which may contains "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "interrupts": list of interrupts for "irq" and "evdet" + evdet applies to isl1209 and isl1219 only + - "isil,ev-evienb": Enable or disable internal pull on EVIN pin + Applies to isl1209 and isl1219 only + Possible values are 0 and 1 + Value 0 enables internal pull-up on evin pin, 1 disables it. + Default will leave the non-volatile configuration of the pullup + as is. + +Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 and #EVDET pin +connected to SoC gpio2 pin 24 and internal pull-up enabled in EVIN pin. + + isl1219: rtc@68 { + compatible = "isil,isl1219"; + reg = <0x68>; + interrupt-names = "irq", "evdet"; + interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, + <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; + isil,ev-evienb = <1>; + }; + diff --git a/Bindings/rtc/isil,isl1219.txt b/Bindings/rtc/isil,isl1219.txt deleted file mode 100644 index c3efd48e91c2..000000000000 --- a/Bindings/rtc/isil,isl1219.txt +++ /dev/null @@ -1,29 +0,0 @@ -Intersil ISL1219 I2C RTC/Alarm chip with event in - -ISL1219 has additional pins EVIN and #EVDET for tamper detection. - -Required properties supported by the device: - - - "compatible": must be "isil,isl1219" - - "reg": I2C bus address of the device - -Optional properties: - - - "interrupt-names": list which may contains "irq" and "evdet" - - "interrupts": list of interrupts for "irq" and "evdet" - - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified - value for proper operation. - - -Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12 - and #EVDET pin connected to SoC gpio2 pin 24: - - isl1219: rtc@68 { - compatible = "isil,isl1219"; - reg = <0x68>; - interrupt-names = "irq", "evdet"; - interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 24 IRQ_TYPE_EDGE_FALLING>; - isil,ev-evienb = <1>; - }; - diff --git a/Bindings/rtc/nxp,pcf85063.txt b/Bindings/rtc/nxp,pcf85063.txt new file mode 100644 index 000000000000..d3e380ad712d --- /dev/null +++ b/Bindings/rtc/nxp,pcf85063.txt @@ -0,0 +1,18 @@ +* NXP PCF85063 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf85063". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 7000fF. + +Example: + +pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; +}; diff --git a/Bindings/rtc/nxp,pcf8523.txt b/Bindings/rtc/nxp,pcf8523.txt new file mode 100644 index 000000000000..0b1080c60f63 --- /dev/null +++ b/Bindings/rtc/nxp,pcf8523.txt @@ -0,0 +1,18 @@ +* NXP PCF8523 Real Time Clock + +Required properties: +- compatible: Should contain "nxp,pcf8523". +- reg: I2C address for chip. + +Optional property: +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). Valid values are 7000 and 12500. + Default value (if no value is specified) is 12500fF. + +Example: + +pcf8523: rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + quartz-load-femtofarads = <7000>; +}; diff --git a/Bindings/rtc/rtc-meson.txt b/Bindings/rtc/rtc-meson.txt new file mode 100644 index 000000000000..e921fe66a362 --- /dev/null +++ b/Bindings/rtc/rtc-meson.txt @@ -0,0 +1,35 @@ +* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC + +Required properties: +- compatible: should be one of the following describing the hardware: + * "amlogic,meson6-rtc" + * "amlogic,meson8-rtc" + * "amlogic,meson8b-rtc" + * "amlogic,meson8m2-rtc" + +- reg: physical register space for the controller's memory mapped registers. +- interrupts: the interrupt line of the RTC block. +- clocks: reference to the external 32.768kHz crystal oscillator. +- vdd-supply: reference to the power supply of the RTC block. +- resets: reset controller reference to allow reset of the controller + +Optional properties for the battery-backed non-volatile memory: +- #address-cells: should be 1 to address the battery-backed non-volatile memory +- #size-cells: should be 1 to reference the battery-backed non-volatile memory + +Optional child nodes: +- see ../nvmem/nvmem.txt + +Example: + + rtc: rtc@740 { + compatible = "amlogic,meson6-rtc"; + reg = <0x740 0x14>; + interrupts = ; + clocks = <&rtc32k_xtal>; + vdd-supply = <&rtc_vdd>; + resets = <&reset RESET_RTC>; + + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/Bindings/rtc/rtc.txt b/Bindings/rtc/rtc.txt index 7c8da6926095..f4687c68c08c 100644 --- a/Bindings/rtc/rtc.txt +++ b/Bindings/rtc/rtc.txt @@ -21,12 +21,16 @@ Optional properties The following properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given - if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode Should be - given if internal trickle charger diode should be - disabled -- wakeup-source : Enables wake up of host system on alarm +- trickle-resistor-ohms : Selected resistor for trickle charger. Should be given + if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode Should be + given if internal trickle charger diode should be + disabled +- wakeup-source : Enables wake up of host system on alarm +- quartz-load-femtofarads : The capacitive load of the quartz(x-tal), + expressed in femto Farad (fF). + The default value shall be listed (if optional), + and likewise all valid values. Trivial RTCs ------------ @@ -39,21 +43,23 @@ possibly an interrupt line. Compatible Vendor / Chip ========== ============= abracon,abb5zes3 AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface +abracon,abeoz9 AB-RTCMC-32.768kHz-EOZ9: Real Time Clock/Calendar Module with I2C Interface dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +epson,rx8571 I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE emmicro,em3027 EM Microelectronic EM3027 Real-time Clock isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM isil,isl12022 Intersil ISL12022 Real-time Clock +microcrystal,rv3028 Real Time Clock Module with I2C-Bus microcrystal,rv3029 Real Time Clock Module with I2C-Bus +microcrystal,rv8523 Real Time Clock nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock -nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar -nxp,pcf85063 Tiny Real-Time Clock pericom,pt7c4338 Real-time Clock Module ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC @@ -62,3 +68,4 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC sii,s35390a 2-wire CMOS real-time clock +whwave,sd3078 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC diff --git a/Bindings/serial/8250.txt b/Bindings/serial/8250.txt index da50321da34d..3cba12f855b7 100644 --- a/Bindings/serial/8250.txt +++ b/Bindings/serial/8250.txt @@ -21,6 +21,7 @@ Required properties: - "altr,16550-FIFO128" - "fsl,16550-FIFO64" - "fsl,ns16550" + - "intel,xscale-uart" - "ti,da830-uart" - "aspeed,ast2400-vuart" - "aspeed,ast2500-vuart" diff --git a/Bindings/serial/ingenic,uart.txt b/Bindings/serial/ingenic,uart.txt index c3c6406d5cfe..24ed8769f4af 100644 --- a/Bindings/serial/ingenic,uart.txt +++ b/Bindings/serial/ingenic,uart.txt @@ -6,7 +6,8 @@ Required properties: - "ingenic,jz4760-uart", - "ingenic,jz4770-uart", - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart". + - "ingenic,jz4780-uart", + - "ingenic,x1000-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. diff --git a/Bindings/serial/milbeaut-uart.txt b/Bindings/serial/milbeaut-uart.txt new file mode 100644 index 000000000000..3d2fb1a7ba94 --- /dev/null +++ b/Bindings/serial/milbeaut-uart.txt @@ -0,0 +1,21 @@ +Socionext Milbeaut UART controller + +Required properties: +- compatible: should be "socionext,milbeaut-usio-uart". +- reg: offset and length of the register set for the device. +- interrupts: two interrupts specifier. +- interrupt-names: should be "rx", "tx". +- clocks: phandle to the input clock. + +Optional properties: +- auto-flow-control: flow control enable. + +Example: + usio1: usio_uart@1e700010 { + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + clocks = <&clk 2>; + auto-flow-control; + }; diff --git a/Bindings/serial/mtk-uart.txt b/Bindings/serial/mtk-uart.txt index 742cb470595b..bcfb13194f16 100644 --- a/Bindings/serial/mtk-uart.txt +++ b/Bindings/serial/mtk-uart.txt @@ -16,6 +16,7 @@ Required properties: * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS + * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS * "mediatek,mt6577-uart" for MT6577 and all of the above - reg: The base address of the UART register bank. diff --git a/Bindings/serial/nvidia,tegra194-tcu.txt b/Bindings/serial/nvidia,tegra194-tcu.txt new file mode 100644 index 000000000000..085a8591accd --- /dev/null +++ b/Bindings/serial/nvidia,tegra194-tcu.txt @@ -0,0 +1,35 @@ +NVIDIA Tegra Combined UART (TCU) + +The TCU is a system for sharing a hardware UART instance among multiple +systems within the Tegra SoC. It is implemented through a mailbox- +based protocol where each "virtual UART" has a pair of mailboxes, one +for transmitting and one for receiving, that is used to communicate +with the hardware implementing the TCU. + +Required properties: +- name : Should be tcu +- compatible + Array of strings + One of: + - "nvidia,tegra194-tcu" +- mbox-names: + "rx" - Mailbox for receiving data from hardware UART + "tx" - Mailbox for transmitting data to hardware UART +- mboxes: Mailboxes corresponding to the mbox-names. + +This node is a mailbox consumer. See the following files for details of +the mailbox subsystem, and the specifiers implemented by the relevant +provider(s): + +- .../mailbox/mailbox.txt +- .../mailbox/nvidia,tegra186-hsp.txt + +Example bindings: +----------------- + +tcu: tcu { + compatible = "nvidia,tegra194-tcu"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>, + <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>; + mbox-names = "rx", "tx"; +}; diff --git a/Bindings/serial/omap_serial.txt b/Bindings/serial/omap_serial.txt index c35d5ece1156..0a9b5444f4e6 100644 --- a/Bindings/serial/omap_serial.txt +++ b/Bindings/serial/omap_serial.txt @@ -22,6 +22,8 @@ Optional properties: - dma-names : "rx" for receive channel, "tx" for transmit channel. - rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - rs485-rts-active-high: drive RTS high when sending (default is low). +- clocks: phandle to the functional clock as per + Documentation/devicetree/bindings/clock/clock-bindings.txt Example: diff --git a/Bindings/serial/pl011.txt b/Bindings/serial/pl011.txt deleted file mode 100644 index 77863aefe9ef..000000000000 --- a/Bindings/serial/pl011.txt +++ /dev/null @@ -1,51 +0,0 @@ -* ARM AMBA Primecell PL011 serial UART - -Required properties: -- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart" -- reg: exactly one register range with length 0x1000 -- interrupts: exactly one interrupt specifier - -Optional properties: -- pinctrl: - When present, must have one state named "default", - and may contain a second name named "sleep". The former - state sets up pins for ordinary operation whereas - the latter state will put the associated pins to sleep - when the UART is unused -- clocks: - When present, the first clock listed must correspond to - the clock named UARTCLK on the IP block, i.e. the clock - to the external serial line, whereas the second clock - must correspond to the PCLK clocking the internal logic - of the block. Just listing one clock (the first one) is - deprecated. -- clock-names: - When present, the first clock listed must be named - "uartclk" and the second clock listed must be named - "apb_pclk" -- dmas: - When present, may have one or two dma channels. - The first one must be named "rx", the second one - must be named "tx". -- auto-poll: - Enables polling when using RX DMA. -- poll-rate-ms: - Rate at which poll occurs when auto-poll is set, - default 100ms. -- poll-timeout-ms: - Poll timeout when auto-poll is set, default - 3000ms. - -See also bindings/arm/primecell.txt - -Example: - -uart@80120000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80120000 0x1000>; - interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>; - dma-names = "rx", "tx"; - clocks = <&foo_clk>, <&bar_clk>; - clock-names = "uartclk", "apb_pclk"; -}; diff --git a/Bindings/serial/pl011.yaml b/Bindings/serial/pl011.yaml new file mode 100644 index 000000000000..1a64d59152aa --- /dev/null +++ b/Bindings/serial/pl011.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/pl011.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM AMBA Primecell PL011 serial UART + +maintainers: + - Rob Herring + +allOf: + - $ref: /schemas/serial.yaml# + +# Need a custom select here or 'arm,primecell' will match on lots of nodes +select: + properties: + compatible: + contains: + enum: + - arm,pl011 + - zte,zx296702-uart + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - const: arm,pl011 + - const: arm,primecell + - items: + - const: zte,zx296702-uart + - const: arm,primecell + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + description: + When present, must have one state named "default", + and may contain a second name named "sleep". The former + state sets up pins for ordinary operation whereas + the latter state will put the associated pins to sleep + when the UART is unused + minItems: 1 + items: + - const: default + - const: sleep + + clocks: + description: + When present, the first clock listed must correspond to + the clock named UARTCLK on the IP block, i.e. the clock + to the external serial line, whereas the second clock + must correspond to the PCLK clocking the internal logic + of the block. Just listing one clock (the first one) is + deprecated. + maxItems: 2 + + clock-names: + items: + - const: uartclk + - const: apb_pclk + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: rx + - const: tx + + auto-poll: + description: + Enables polling when using RX DMA. + type: boolean + + poll-rate-ms: + description: + Rate at which poll occurs when auto-poll is set. + default 100ms. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 100 + + poll-timeout-ms: + description: + Poll timeout when auto-poll is set, default + 3000ms. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 3000 + +required: + - compatible + - reg + - interrupts + +dependencies: + poll-rate-ms: [ auto-poll ] + poll-timeout-ms: [ auto-poll ] + +additionalProperties: false + +examples: + - | + serial@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 4>; + dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>; + dma-names = "rx", "tx"; + clocks = <&foo_clk>, <&bar_clk>; + clock-names = "uartclk", "apb_pclk"; + }; + +... diff --git a/Bindings/serial/renesas,rzn1-uart.txt b/Bindings/serial/renesas,rzn1-uart.txt deleted file mode 100644 index 8b9e0d4dc2e4..000000000000 --- a/Bindings/serial/renesas,rzn1-uart.txt +++ /dev/null @@ -1,10 +0,0 @@ -Renesas RZ/N1 UART - -This controller is based on the Synopsys DesignWare ABP UART and inherits all -properties defined in snps-dw-apb-uart.txt except for the compatible property. - -Required properties: -- compatible : The device specific string followed by the generic RZ/N1 string. - Therefore it must be one of: - "renesas,r9a06g032-uart", "renesas,rzn1-uart" - "renesas,r9a06g033-uart", "renesas,rzn1-uart" diff --git a/Bindings/serial/renesas,sci-serial.txt b/Bindings/serial/renesas,sci-serial.txt index 20232ad05d89..dd63151dc8b6 100644 --- a/Bindings/serial/renesas,sci-serial.txt +++ b/Bindings/serial/renesas,sci-serial.txt @@ -29,7 +29,9 @@ Required properties: - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART. - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. + - "renesas,hscif-r8a7778" for R8A7778 (R-Car M1) HSCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. + - "renesas,hscif-r8a7779" for R8A7779 (R-Car H1) HSCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART. - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART. diff --git a/Bindings/serial/snps-dw-apb-uart.txt b/Bindings/serial/snps-dw-apb-uart.txt deleted file mode 100644 index 12bbe9f22560..000000000000 --- a/Bindings/serial/snps-dw-apb-uart.txt +++ /dev/null @@ -1,76 +0,0 @@ -* Synopsys DesignWare ABP UART - -Required properties: -- compatible : "snps,dw-apb-uart" -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. - -Clock handling: -The clock rate of the input clock needs to be supplied by one of -- clock-frequency : the input clock frequency for the UART. -- clocks : phandle to the input clock - -The supplying peripheral clock can also be handled, needing a second property -- clock-names: tuple listing input clock names. - Required elements: "baudclk", "apb_pclk" - -Optional properties: -- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE - configuration parameter. Define this if your UART does not implement the busy - functionality. -- resets : phandle to the parent reset controller. -- reg-shift : quantity to shift the register offsets by. If this property is - not present then the register offsets are not shifted. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. If this property is not present then single byte - accesses are used. -- dcd-override : Override the DCD modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- dsr-override : Override the DTS modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- cts-override : Override the CTS modem status signal. This signal will always - be reported as active instead of being obtained from the modem status - register. Define this if your serial port does not use this pin. -- ri-override : Override the RI modem status signal. This signal will always be - reported as inactive instead of being obtained from the modem status register. - Define this if your serial port does not use this pin. - -Example: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - dcd-override; - dsr-override; - cts-override; - ri-override; - }; - -Example with one clock: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clocks = <&baudclk>; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - }; - -Example with two clocks: - - uart@80230000 { - compatible = "snps,dw-apb-uart"; - reg = <0x80230000 0x100>; - clocks = <&baudclk>, <&apb_pclk>; - clock-names = "baudclk", "apb_pclk"; - interrupts = <10>; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/Bindings/serial/snps-dw-apb-uart.yaml b/Bindings/serial/snps-dw-apb-uart.yaml new file mode 100644 index 000000000000..b42002542690 --- /dev/null +++ b/Bindings/serial/snps-dw-apb-uart.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare ABP UART + +maintainers: + - Rob Herring + +allOf: + - $ref: /schemas/serial.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a06g032-uart + - renesas,r9a06g033-uart + - const: renesas,rzn1-uart + - items: + - enum: + - rockchip,px30-uart + - rockchip,rk3036-uart + - rockchip,rk3066-uart + - rockchip,rk3188-uart + - rockchip,rk3288-uart + - rockchip,rk3328-uart + - rockchip,rk3368-uart + - rockchip,rk3399-uart + - rockchip,rv1108-uart + - const: snps,dw-apb-uart + - items: + - enum: + - brcm,bcm11351-dw-apb-uart + - brcm,bcm21664-dw-apb-uart + - const: snps,dw-apb-uart + - const: snps,dw-apb-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-frequency: true + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: baudclk + - const: apb_pclk + + snps,uart-16550-compatible: + description: reflects the value of UART_16550_COMPATIBLE configuration + parameter. Define this if your UART does not implement the busy functionality. + type: boolean + + resets: + maxItems: 1 + + reg-shift: true + + reg-io-width: true + + dcd-override: + description: Override the DCD modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + dsr-override: + description: Override the DTS modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + cts-override: + description: Override the CTS modem status signal. This signal will + always be reported as active instead of being obtained from the modem + status register. Define this if your serial port does not use this + pin. + type: boolean + + ri-override: + description: Override the RI modem status signal. This signal will always + be reported as inactive instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. + type: boolean + +required: + - compatible + - reg + - interrupts + +examples: + - | + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + dcd-override; + dsr-override; + cts-override; + ri-override; + }; + + - | + // Example with one clock: + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + - | + // Example with two clocks: + serial@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>, <&apb_pclk>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; +... diff --git a/Bindings/soc/amlogic/clk-measure.txt b/Bindings/soc/amlogic/clk-measure.txt index 205a54bcd7c7..6bf6b43f8dd8 100644 --- a/Bindings/soc/amlogic/clk-measure.txt +++ b/Bindings/soc/amlogic/clk-measure.txt @@ -9,6 +9,8 @@ Required properties: "amlogic,meson-gx-clk-measure" for GX SoCs "amlogic,meson8-clk-measure" for Meson8 SoCs "amlogic,meson8b-clk-measure" for Meson8b SoCs + "amlogic,meson-axg-clk-measure" for AXG SoCs + "amlogic,meson-g12a-clk-measure" for G12a SoCs - reg: base address and size of the Clock Measurer register space. Example: diff --git a/Bindings/soc/bcm/brcm,bcm2835-pm.txt b/Bindings/soc/bcm/brcm,bcm2835-pm.txt new file mode 100644 index 000000000000..3b7d32956391 --- /dev/null +++ b/Bindings/soc/bcm/brcm,bcm2835-pm.txt @@ -0,0 +1,46 @@ +BCM2835 PM (Power domains, watchdog) + +The PM block controls power domains and some reset lines, and includes +a watchdog timer. This binding supersedes the brcm,bcm2835-pm-wdt +binding which covered some of PM's register range and functionality. + +Required properties: + +- compatible: Should be "brcm,bcm2835-pm" +- reg: Specifies base physical address and size of the two + register ranges ("PM" and "ASYNC_BRIDGE" in that + order) +- clocks: a) v3d: The V3D clock from CPRMAN + b) peri_image: The PERI_IMAGE clock from CPRMAN + c) h264: The H264 clock from CPRMAN + d) isp: The ISP clock from CPRMAN +- #reset-cells: Should be 1. This property follows the reset controller + bindings[1]. +- #power-domain-cells: Should be 1. This property follows the power domain + bindings[2]. + +Optional properties: + +- timeout-sec: Contains the watchdog timeout in seconds +- system-power-controller: Whether the watchdog is controlling the + system power. This node follows the power controller bindings[3]. + +[1] Documentation/devicetree/bindings/reset/reset.txt +[2] Documentation/devicetree/bindings/power/power_domain.txt +[3] Documentation/devicetree/bindings/power/power-controller.txt + +Example: + +pm { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; +}; diff --git a/Bindings/soc/qcom/qcom,smd-rpm.txt b/Bindings/soc/qcom/qcom,smd-rpm.txt index ec95705ba692..f3fa313963d5 100644 --- a/Bindings/soc/qcom/qcom,smd-rpm.txt +++ b/Bindings/soc/qcom/qcom,smd-rpm.txt @@ -23,6 +23,7 @@ resources. "qcom,rpm-msm8916" "qcom,rpm-msm8974" "qcom,rpm-msm8998" + "qcom,rpm-sdm660" "qcom,rpm-qcs404" - qcom,smd-channels: diff --git a/Bindings/sound/adi,adau1977.txt b/Bindings/sound/adi,adau1977.txt index e79aeef73f28..9225472c80b4 100644 --- a/Bindings/sound/adi,adau1977.txt +++ b/Bindings/sound/adi,adau1977.txt @@ -17,12 +17,18 @@ Required properties: Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: - - reset-gpio: the reset pin for the chip, for more details consult + - reset-gpios: the reset pin for the chip, for more details consult Documentation/devicetree/bindings/gpio/gpio.txt - DVDD-supply: supply voltage for the digital core, please consult Documentation/devicetree/bindings/regulator/regulator.txt +- adi,micbias: configures the voltage setting for the MICBIAS pin. + Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage + 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V + If not specified the default value will be "7" meaning 8.5 Volts. + This property is only valid for the ADAU1977 + For required properties on SPI, please consult Documentation/devicetree/bindings/spi/spi-bus.txt @@ -40,7 +46,8 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + adi,micbias = <3>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; adau1977_i2c: adau1977@11 { @@ -50,5 +57,5 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; diff --git a/Bindings/sound/ak4458.txt b/Bindings/sound/ak4458.txt index 7839be78448d..e5820235e0d5 100644 --- a/Bindings/sound/ak4458.txt +++ b/Bindings/sound/ak4458.txt @@ -4,7 +4,7 @@ This device supports I2C mode. Required properties: -- compatible : "asahi-kasei,ak4458" +- compatible : "asahi-kasei,ak4458" or "asahi-kasei,ak4497" - reg : The I2C address of the device for I2C Optional properties: diff --git a/Bindings/sound/audio-graph-scu-card.txt b/Bindings/sound/audio-graph-scu-card.txt deleted file mode 100644 index 62d42768a00b..000000000000 --- a/Bindings/sound/audio-graph-scu-card.txt +++ /dev/null @@ -1,123 +0,0 @@ -Audio-Graph-SCU-Card: - -Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM". - -It is based on common bindings for device graphs. -see ${LINUX}/Documentation/devicetree/bindings/graph.txt - -Basically, Audio-Graph-SCU-Card property is same as -Simple-Card / Simple-SCU-Card / Audio-Graph-Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt - -Below are same as Simple-Card / Audio-Graph-Card. - -- label -- dai-format -- frame-master -- bitclock-master -- bitclock-inversion -- frame-inversion -- dai-tdm-slot-num -- dai-tdm-slot-width -- clocks / system-clock-frequency - -Below are same as Simple-SCU-Card. - -- convert-rate -- convert-channels -- prefix -- routing - -Required properties: - -- compatible : "audio-graph-scu-card"; -- dais : list of CPU DAI port{s} - -Example 1. Sampling Rate Conversion - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - prefix = "codec"; - routing = "codec Playback", "DAI0 Playback", - "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - -Example 2. 2 CPU 1 Codec (Mixing) - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", - "DAI0 Capture", "codec Capture"; - - dais = <&cpu_port0 - &cpu_port1>; - }; - - audio-codec { - ... - - audio-graph-card,prefix = "codec"; - audio-graph-card,convert-rate = <48000>; - port { - codec_endpoint0: endpoint { - remote-endpoint = <&cpu_endpoint0>; - }; - codec_endpoint1: endpoint { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - dai-controller { - ... - ports { - cpu_port0: port { - cpu_endpoint0: endpoint { - remote-endpoint = <&codec_endpoint0>; - - dai-format = "left_j"; - ... - }; - }; - cpu_port1: port { - cpu_endpoint1: endpoint { - remote-endpoint = <&codec_endpoint1>; - - dai-format = "left_j"; - ... - }; - }; - }; - }; diff --git a/Bindings/sound/cs35l36.txt b/Bindings/sound/cs35l36.txt new file mode 100644 index 000000000000..912bd162b477 --- /dev/null +++ b/Bindings/sound/cs35l36.txt @@ -0,0 +1,168 @@ +CS35L36 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l36" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from 2550mV to 12000mV with + increments of 50mV. + (Default) VP + + - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA. + Configures the peak current by monitoring the current through the boost FET. + Range starts at 1600mA and goes to a maximum of 4500mA with increments of + 50mA. + (Default) 4.50 Amps + + - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value. + Seeds the digital boost converter's inductor estimation block with the initial + inductance value to reference. + + 1000 = 1uH (Default) + 1200 = 1.2uH + +Optional properties: + - cirrus,multi-amp-mode : Boolean to determine if there are more than + one amplifier in the system. If more than one it is best to Hi-Z the ASP + port to prevent bus contention on the output signal + + - cirrus,boost-ctl-select : Boost conerter control source selection. + Selects the source of the BST_CTL target VBST voltage for the boost + converter to generate. + 0x00 - Control Port Value + 0x01 - Class H Tracking (Default) + 0x10 - MultiDevice Sync Value + + - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming + PCM data + + - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound IMON feedback data + + - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound VMON feedback data + + - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable. + This enables the digital boost converter to operate in a low power + (Discontinuous Conduction) mode during low loading conditions. + + - cirrus,weak-fet-disable : Boolean : The strength of the output drivers is + reduced when operating in a Weak-FET Drive Mode and must not be used to drive + a large load. + + - cirrus,classh-wk-fet-delay : Weak-FET entry delay. Controls the delay + (in ms) before the Class H algorithm switches to the weak-FET voltage + (after the audio falls and remains below the value specified in WKFET_AMP_THLD). + + 0 = 0ms + 1 = 5ms + 2 = 10ms + 3 = 50ms + 4 = 100ms (Default) + 5 = 200ms + 6 = 500ms + 7 = 1000ms + + - cirrus,classh-weak-fet-thld-millivolt : Weak-FET amplifier drive threshold. + Configures the signal threshold at which the PWM output stage enters + weak-FET operation. The range is 50mV to 700mV in 50mV increments. + + - cirrus,temp-warn-threshold : Amplifier overtemperature warning threshold. + Configures the threshold at which the overtemperature warning condition occurs. + When the threshold is met, the overtemperature warning attenuation is applied + and the TEMP_WARN_EINT interrupt status bit is set. + If TEMP_WARN_MASK = 0, INTb is asserted. + + 0 = 105C + 1 = 115C + 2 = 125C (Default) + 3 = 135C + + - cirrus,irq-drive-select : Selects the driver type of the selected interrupt + output. + + 0 = Open-drain + 1 = Push-pull (Default) + + - cirrus,irq-gpio-select : Selects the pin to serve as the programmable + interrupt output. + + 0 = PDM_DATA / SWIRE_SD / INT (Default) + 1 = GPIO + +Optional properties for the "cirrus,vpbr-config" Sub-node + + - cirrus,vpbr-en : VBST brownout prevention enable. Configures whether the + VBST brownout prevention algorithm is enabled or disabled. + + 0 = VBST brownout prevention disabled (default) + 1 = VBST brownout prevention enabled + + See Section 7.31.1 VPBR Config for configuration options & further details + + - cirrus,vpbr-thld : Initial VPBR threshold. Configures the VP brownout + threshold voltage + + - cirrus,cirrus,vpbr-atk-rate : Attenuation attack step rate. Configures the + amount delay between consecutive volume attenuation steps when a brownout + condition is present and the VP brownout condition is in an attacking state. + + - cirrus,vpbr-atk-vol : VP brownout prevention step size. Configures the VP + brownout prevention attacking attenuation step size when operating in either + digital volume or analog gain modes. + + - cirrus,vpbr-max-attn : Maximum attenuation that the VP brownout prevention + can apply to the audio signal. + + - cirrus,vpbr-wait : Configures the delay time between a brownout condition + no longer being present and the VP brownout prevention entering an attenuation + release state. + + - cirrus,vpbr-rel-rate : Attenuation release step rate. Configures the delay + between consecutive volume attenuation release steps when a brownout condition + is not longer present and the VP brownout is in an attenuation release state. + + - cirrus,vpbr-mute-en : During the attack state, if the vpbr-max-attn value + is reached, the error condition still remains, and this bit is set, the audio + is muted. + +Example: + +cs35l36: cs35l36@40 { + compatible = "cirrus,cs35l36"; + reg = <0x40>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio0 54 0>; + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-ctl-millivolt = <10000>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ctl-select = <0x00>; + cirrus,weak-fet-delay = <0x04>; + cirrus,weak-fet-thld = <0x01>; + cirrus,temp-warn-threshold = <0x01>; + cirrus,multi-amp-mode; + cirrus,irq-drive-select = <0x01>; + cirrus,irq-gpio-select = <0x01>; + + cirrus,vpbr-config { + cirrus,vpbr-en = <0x00>; + cirrus,vpbr-thld = <0x05>; + cirrus,vpbr-atk-rate = <0x02>; + cirrus,vpbr-atk-vol = <0x01>; + cirrus,vpbr-max-attn = <0x09>; + cirrus,vpbr-wait = <0x01>; + cirrus,vpbr-rel-rate = <0x05>; + cirrus,vpbr-mute-en = <0x00>; + }; +}; diff --git a/Bindings/sound/cs4341.txt b/Bindings/sound/cs4341.txt new file mode 100644 index 000000000000..12b4aa8ef0db --- /dev/null +++ b/Bindings/sound/cs4341.txt @@ -0,0 +1,22 @@ +Cirrus Logic CS4341 audio DAC + +This device supports both I2C and SPI (configured with pin strapping +on the board). + +Required properties: + - compatible: "cirrus,cs4341a" + - reg : the I2C address of the device for I2C, the chip select + number for SPI. + +For required properties on I2C-bus, please consult +Documentation/devicetree/bindings/i2c/i2c.txt +For required properties on SPI-bus, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + codec: cs4341@0 { + #sound-dai-cells = <0>; + compatible = "cirrus,cs4341a"; + reg = <0>; + spi-max-frequency = <6000000>; + }; diff --git a/Bindings/sound/davinci-mcasp-audio.txt b/Bindings/sound/davinci-mcasp-audio.txt index b279b6072bd5..a58f79f5345c 100644 --- a/Bindings/sound/davinci-mcasp-audio.txt +++ b/Bindings/sound/davinci-mcasp-audio.txt @@ -45,6 +45,23 @@ Optional properties: - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +Optional GPIO support: +If any McASP pin need to be used as GPIO then the McASP node must have: +... + gpio-controller + #gpio-cells = <2>; +... + +When requesting a GPIO, the first parameter is the PIN index in McASP_P* +registers. +For example to request the AXR2 pin of mcasp8: +function-gpios = <&mcasp8 2 0>; + +Or to request the ACLKR pin of mcasp8: +function-gpios = <&mcasp8 29 0>; + +For generic gpio information, please refer to bindings/gpio/gpio.txt + Example: mcasp0: mcasp0@1d00000 { diff --git a/Bindings/sound/fsl,micfil.txt b/Bindings/sound/fsl,micfil.txt new file mode 100644 index 000000000000..53e227b15277 --- /dev/null +++ b/Bindings/sound/fsl,micfil.txt @@ -0,0 +1,32 @@ +NXP MICFIL Digital Audio Interface (MICFIL). + +The MICFIL digital interface provides a 16-bit audio signal from a PDM +microphone bitstream in a configurable output sampling rate. + +Required properties: + + - compatible : Compatible list, contains "fsl,imx8mm-micfil" + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the micfil interrupts. + + - clocks : Must contain an entry for each entry in clock-names. + + - clock-names : Must include the "ipg_clk" for register access and + "ipg_clk_app" for internal micfil clock. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + +Example: +micfil: micfil@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x0 0x30080000 0x0 0x10000>; + interrupts = , + ; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>; + clock-names = "ipg_clk", "ipg_clk_app"; + dmas = <&sdma2 24 26 0x80000000>; +}; diff --git a/Bindings/sound/google,cros-ec-codec.txt b/Bindings/sound/google,cros-ec-codec.txt new file mode 100644 index 000000000000..1084f7f22eea --- /dev/null +++ b/Bindings/sound/google,cros-ec-codec.txt @@ -0,0 +1,26 @@ +* Audio codec controlled by ChromeOS EC + +Google's ChromeOS EC codec is a digital mic codec provided by the +Embedded Controller (EC) and is controlled via a host-command interface. + +An EC codec node should only be found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt). + +Required properties: +- compatible: Must contain "google,cros-ec-codec" +- #sound-dai-cells: Should be 1. The cell specifies number of DAIs. +- max-dmic-gain: A number for maximum gain in dB on digital microphone. + +Example: + +cros-ec@0 { + compatible = "google,cros-ec-spi"; + + ... + + cros_ec_codec: ec-codec { + compatible = "google,cros-ec-codec"; + #sound-dai-cells = <1>; + max-dmic-gain = <43>; + }; +}; diff --git a/Bindings/sound/ingenic,jz4725b-codec.txt b/Bindings/sound/ingenic,jz4725b-codec.txt new file mode 100644 index 000000000000..05adc0d47b13 --- /dev/null +++ b/Bindings/sound/ingenic,jz4725b-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4725B codec controller + +Required properties: +- compatible : "ingenic,jz4725b-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@100200a4 { + compatible = "ingenic,jz4725b-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/Bindings/sound/ingenic,jz4740-codec.txt b/Bindings/sound/ingenic,jz4740-codec.txt new file mode 100644 index 000000000000..1ffcade87e7b --- /dev/null +++ b/Bindings/sound/ingenic,jz4740-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4740 codec controller + +Required properties: +- compatible : "ingenic,jz4740-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@10020080 { + compatible = "ingenic,jz4740-codec"; + reg = <0x10020080 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4740_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/Bindings/sound/mt6358.txt b/Bindings/sound/mt6358.txt new file mode 100644 index 000000000000..5465730013a1 --- /dev/null +++ b/Bindings/sound/mt6358.txt @@ -0,0 +1,18 @@ +Mediatek MT6358 Audio Codec + +The communication between MT6358 and SoC is through Mediatek PMIC wrapper. +For more detail, please visit Mediatek PMIC wrapper documentation. + +Must be a child node of PMIC wrapper. + +Required properties: + +- compatible : "mediatek,mt6358-sound". +- Avdd-supply : power source of AVDD + +Example: + +mt6358_snd { + compatible = "mediatek,mt6358-sound"; + Avdd-supply = <&mt6358_vaud28_reg>; +}; diff --git a/Bindings/sound/mt8183-afe-pcm.txt b/Bindings/sound/mt8183-afe-pcm.txt new file mode 100644 index 000000000000..396ba38619f6 --- /dev/null +++ b/Bindings/sound/mt8183-afe-pcm.txt @@ -0,0 +1,36 @@ +Mediatek AFE PCM controller for mt8183 + +Required properties: +- compatible = "mediatek,mt68183-audio"; +- reg: register location and size +- interrupts: should contain AFE interrupt +- power-domains: should define the power domain +- clocks: Must contain an entry for each entry in clock-names +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll3_d4", + "top_clk26m_clk"; + +Example: + + afe: mt8183-afe-pcm@11220000 { + compatible = "mediatek,mt8183-audio"; + reg = <0 0x11220000 0 0x1000>; + interrupts = ; + power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&infrasys CLK_INFRA_AUDIO>, + <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL_D2_D4>, + <&clk26m>; + clock-names = "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll_d2_d4", + "top_clk26m_clk"; + }; diff --git a/Bindings/sound/mtk-btcvsd-snd.txt b/Bindings/sound/mtk-btcvsd-snd.txt new file mode 100644 index 000000000000..679e44839b48 --- /dev/null +++ b/Bindings/sound/mtk-btcvsd-snd.txt @@ -0,0 +1,24 @@ +Mediatek ALSA BT SCO CVSD/MSBC Driver + +Required properties: +- compatible = "mediatek,mtk-btcvsd-snd"; +- reg: register location and size of PKV and SRAM_BANK2 +- interrupts: should contain BTSCO interrupt +- mediatek,infracfg: the phandles of INFRASYS +- mediatek,offset: Array contains of register offset and mask + infra_misc_offset, + infra_conn_bt_cvsd_mask, + cvsd_mcu_read_offset, + cvsd_mcu_write_offset, + cvsd_packet_indicator_offset + +Example: + + mtk-btcvsd-snd@18000000 { + compatible = "mediatek,mtk-btcvsd-snd"; + reg=<0 0x18000000 0 0x1000>, + <0 0x18080000 0 0x8000>; + interrupts = ; + mediatek,infracfg = <&infrasys>; + mediatek,offset = <0xf00 0x800 0xfd0 0xfd4 0xfd8>; + }; diff --git a/Bindings/sound/nvidia,tegra30-hda.txt b/Bindings/sound/nvidia,tegra30-hda.txt index 44d27456e8a4..21cd310963b1 100644 --- a/Bindings/sound/nvidia,tegra30-hda.txt +++ b/Bindings/sound/nvidia,tegra30-hda.txt @@ -13,6 +13,10 @@ Required properties: See ../reset/reset.txt for details. - reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x +Optional properties: +- nvidia,model : The user-visible name of this sound complex. Since the property + is optional, legacy boards can use default name provided in hda driver. + Example: hda@70030000 { @@ -27,4 +31,5 @@ hda@70030000 { <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + nvidia,model = "jetson-tk1-hda"; }; diff --git a/Bindings/sound/qcom,msm8916-wcd-analog.txt b/Bindings/sound/qcom,msm8916-wcd-analog.txt index fdcea3d12ee5..e7d17dda55db 100644 --- a/Bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/Bindings/sound/qcom,msm8916-wcd-analog.txt @@ -30,6 +30,7 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + Optional Properties: - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons detection on headset when the mbhc is powered up @@ -92,9 +93,9 @@ spmi_bus { "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - VDD-CDC-IO-supply = <&pm8916_l5>; - VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; - VDD-MICBIAS-supply = <&pm8916_l13>; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; }; }; diff --git a/Bindings/sound/qcom,wcd9335.txt b/Bindings/sound/qcom,wcd9335.txt index 1d8d49e30af7..5d6ea66a863f 100644 --- a/Bindings/sound/qcom,wcd9335.txt +++ b/Bindings/sound/qcom,wcd9335.txt @@ -34,12 +34,12 @@ Required properties with SLIMbus Interface: Definition: Interrupt names of WCD INTR1 and INTR2 Should be: "intr1", "intr2" -- reset-gpio: +- reset-gpios: Usage: required Value type: Definition: Reset gpio line -- qcom,ifd: +- slim-ifc-dev: Usage: required Value type: Definition: SLIM interface device @@ -104,13 +104,13 @@ Required properties with SLIMbus Interface: Value type: Definition: Must be 1 -codec@1{ +audio-codec@1{ compatible = "slim217,1a0"; reg = <1 0>; interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr2" - reset-gpio = <&msmgpio 64 0>; - qcom,ifd = <&wc9335_ifd>; + reset-gpios = <&msmgpio 64 0>; + slim-ifc-dev = <&wc9335_ifd>; clock-names = "mclk", "native"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>, <&rpmcc RPM_SMD_BB_CLK1>; diff --git a/Bindings/sound/rockchip,rk3328-codec.txt b/Bindings/sound/rockchip,rk3328-codec.txt new file mode 100644 index 000000000000..2469588c7ccb --- /dev/null +++ b/Bindings/sound/rockchip,rk3328-codec.txt @@ -0,0 +1,23 @@ +* Rockchip Rk3328 internal codec + +Required properties: + +- compatible: "rockchip,rk3328-codec" +- reg: physical base address of the controller and length of memory mapped + region. +- rockchip,grf: the phandle of the syscon node for GRF register. +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should be "pclk". +- spk-depop-time-ms: speak depop time msec. + +Example for rk3328 internal codec: + +codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0x0 0xff410000 0x0 0x1000>; + rockchip,grf = <&grf>; + clocks = <&cru PCLK_ACODEC>; + clock-names = "pclk"; + spk-depop-time-ms = 100; + status = "disabled"; +}; diff --git a/Bindings/sound/sgtl5000.txt b/Bindings/sound/sgtl5000.txt index 9c58f724396a..9d9ff5184939 100644 --- a/Bindings/sound/sgtl5000.txt +++ b/Bindings/sound/sgtl5000.txt @@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA +- sclk-strength: the SCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example: sgtl5000: codec@a { diff --git a/Bindings/sound/simple-scu-card.txt b/Bindings/sound/simple-scu-card.txt deleted file mode 100644 index 3a2f71616cda..000000000000 --- a/Bindings/sound/simple-scu-card.txt +++ /dev/null @@ -1,94 +0,0 @@ -ASoC Simple SCU Sound Card - -Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM". -For example, you can use this driver if you want to exchange sampling rate convert, -Mixing, etc... - -Required properties: - -- compatible : "simple-scu-audio-card" - "renesas,rsrc-card" -Optional properties: - -- simple-audio-card,name : see simple-audio-card.txt -- simple-audio-card,cpu : see simple-audio-card.txt -- simple-audio-card,codec : see simple-audio-card.txt - -Optional subnode properties: - -- simple-audio-card,format : see simple-audio-card.txt -- simple-audio-card,frame-master : see simple-audio-card.txt -- simple-audio-card,bitclock-master : see simple-audio-card.txt -- simple-audio-card,bitclock-inversion : see simple-audio-card.txt -- simple-audio-card,frame-inversion : see simple-audio-card.txt -- simple-audio-card,convert-rate : platform specified sampling rate convert -- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) -- simple-audio-card,prefix : see routing -- simple-audio-card,widgets : Please refer to widgets.txt. -- simple-audio-card,routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources. - use audio-prefix if some components is using same sink/sources naming. - it can be used if compatible was "renesas,rsrc-card"; - -Required CPU/CODEC subnodes properties: - -- sound-dai : see simple-audio-card.txt - -Optional CPU/CODEC subnodes properties: - -- clocks / system-clock-frequency : see simple-audio-card.txt - -Example 1. Sampling Rate Conversion - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - simple-audio-card,convert-rate = <48000>; - - simple-audio-card,prefix = "ak4642"; - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4642 Capture"; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; - }; -}; - -Example 2. 2 CPU 1 Codec (Mixing) - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&dpcmcpu>; - simple-audio-card,frame-master = <&dpcmcpu>; - - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "ak4642 Playback", "DAI1 Playback"; - - dpcmcpu: cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - - cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - - codec { - prefix = "ak4642"; - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; -}; diff --git a/Bindings/sound/sprd-pcm.txt b/Bindings/sound/sprd-pcm.txt new file mode 100644 index 000000000000..4b23e84b2e57 --- /dev/null +++ b/Bindings/sound/sprd-pcm.txt @@ -0,0 +1,23 @@ +* Spreadtrum DMA platfrom bindings + +Required properties: +- compatible: Should be "sprd,pcm-platform". +- dmas: Specify the list of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + +Example: + + audio_platform:platform@0 { + compatible = "sprd,pcm-platform"; + dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>, + <&agcp_dma 3 3>, <&agcp_dma 4 4>, + <&agcp_dma 5 5>, <&agcp_dma 6 6>, + <&agcp_dma 7 7>, <&agcp_dma 8 8>, + <&agcp_dma 9 9>, <&agcp_dma 10 10>; + dma-names = "normal_p_l", "normal_p_r", + "normal_c_l", "normal_c_r", + "voice_c", "fast_p", + "loop_c", "loop_p", + "voip_c", "voip_p"; + }; diff --git a/Bindings/sound/xlnx,audio-formatter.txt b/Bindings/sound/xlnx,audio-formatter.txt new file mode 100644 index 000000000000..cbc93c8f4963 --- /dev/null +++ b/Bindings/sound/xlnx,audio-formatter.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for Xilinx PL audio formatter + +The IP core supports DMA, data formatting(AES<->PCM conversion) +of audio samples. + +Required properties: + - compatible: "xlnx,audio-formatter-1.0" + - interrupt-names: Names specified to list of interrupts in same + order mentioned under "interrupts". + List of supported interrupt names are: + "irq_mm2s" : interrupt from MM2S block + "irq_s2mm" : interrupt from S2MM block + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - reg: Base address and size of the IP core instance. + - clock-names: List of input clocks. + Required elements: "s_axi_lite_aclk", "aud_mclk" + - clocks: Input clock specifier. Refer to common clock bindings. + +Example: + audio_ss_0_audio_formatter_0: audio_formatter@80010000 { + compatible = "xlnx,audio-formatter-1.0"; + interrupt-names = "irq_mm2s", "irq_s2mm"; + interrupt-parent = <&gic>; + interrupts = <0 104 4>, <0 105 4>; + reg = <0x0 0x80010000 0x0 0x1000>; + clock-names = "s_axi_lite_aclk", "aud_mclk"; + clocks = <&clk 71>, <&clk_wiz_1 0>; + }; diff --git a/Bindings/sound/xlnx,spdif.txt b/Bindings/sound/xlnx,spdif.txt new file mode 100644 index 000000000000..15c2d64d247c --- /dev/null +++ b/Bindings/sound/xlnx,spdif.txt @@ -0,0 +1,28 @@ +Device-Tree bindings for Xilinx SPDIF IP + +The IP supports playback and capture of SPDIF audio + +Required properties: + - compatible: "xlnx,spdif-2.0" + - clock-names: List of input clocks. + Required elements: "s_axi_aclk", "aud_clk_i" + - clocks: Input clock specifier. Refer to common clock bindings. + - reg: Base address and address length of the IP core instance. + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - xlnx,spdif-mode: 0 :- receiver mode + 1 :- transmitter mode + - xlnx,aud_clk_i: input audio clock value. + +Example: + spdif_0: spdif@80010000 { + clock-names = "aud_clk_i", "s_axi_aclk"; + clocks = <&misc_clk_0>, <&clk 71>; + compatible = "xlnx,spdif-2.0"; + interrupt-names = "spdif_interrupt"; + interrupt-parent = <&gic>; + interrupts = <0 91 4>; + reg = <0x0 0x80010000 0x0 0x10000>; + xlnx,spdif-mode = <1>; + xlnx,aud_clk_i = <49152913>; + }; diff --git a/Bindings/spi/atmel-quadspi.txt b/Bindings/spi/atmel-quadspi.txt index b93c1e2f25dd..7c40ea694352 100644 --- a/Bindings/spi/atmel-quadspi.txt +++ b/Bindings/spi/atmel-quadspi.txt @@ -1,14 +1,19 @@ * Atmel Quad Serial Peripheral Interface (QSPI) Required properties: -- compatible: Should be "atmel,sama5d2-qspi". +- compatible: Should be one of the following: + - "atmel,sama5d2-qspi" + - "microchip,sam9x60-qspi" - reg: Should contain the locations and lengths of the base registers and the mapped memory. - reg-names: Should contain the resource reg names: - qspi_base: configuration register address space - qspi_mmap: memory mapped address space - interrupts: Should contain the interrupt for the device. -- clocks: The phandle of the clock needed by the QSPI controller. +- clocks: Should reference the peripheral clock and the QSPI system + clock if available. +- clock-names: Should contain "pclk" for the peripheral clock and "qspick" + for the system clock when available. - #address-cells: Should be <1>. - #size-cells: Should be <0>. @@ -19,7 +24,8 @@ spi@f0020000 { reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; reg-names = "qspi_base", "qspi_mmap"; interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&spi0_clk>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; + clock-names = "pclk"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; diff --git a/Bindings/spi/fsl-imx-cspi.txt b/Bindings/spi/fsl-imx-cspi.txt index e3c48b20b1a6..2d3264140cc5 100644 --- a/Bindings/spi/fsl-imx-cspi.txt +++ b/Bindings/spi/fsl-imx-cspi.txt @@ -10,6 +10,7 @@ Required properties: - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc + - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8M - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - clocks : Clock specifiers for both ipg and per clocks. diff --git a/Bindings/mtd/fsl-quadspi.txt b/Bindings/spi/spi-fsl-qspi.txt similarity index 73% rename from Bindings/mtd/fsl-quadspi.txt rename to Bindings/spi/spi-fsl-qspi.txt index 483e9cfac1b1..e8f1d627d288 100644 --- a/Bindings/mtd/fsl-quadspi.txt +++ b/Bindings/spi/spi-fsl-qspi.txt @@ -14,15 +14,13 @@ Required properties: - clocks : The clocks needed by the QuadSPI controller - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi". -Optional properties: - - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B. - Each bus can be connected with two NOR flashes. - Most of the time, each bus only has one NOR flash - connected, this is the default case. - But if there are two NOR flashes connected to the - bus, you should enable this property. - (Please check the board's schematic.) - - big-endian : That means the IP register is big endian +Required SPI slave node properties: + - reg: There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + <0>: Bus A, CS 0 + <1>: Bus A, CS 1 + <2>: Bus B, CS 0 + <3>: Bus B, CS 1 Example: @@ -40,7 +38,7 @@ qspi0: quadspi@40044000 { }; }; -Example showing the usage of two SPI NOR devices: +Example showing the usage of two SPI NOR devices on bus A: &qspi2 { pinctrl-names = "default"; diff --git a/Bindings/spi/spi-nxp-fspi.txt b/Bindings/spi/spi-nxp-fspi.txt new file mode 100644 index 000000000000..2cd67eb727d4 --- /dev/null +++ b/Bindings/spi/spi-nxp-fspi.txt @@ -0,0 +1,39 @@ +* NXP Flex Serial Peripheral Interface (FSPI) + +Required properties: + - compatible : Should be "nxp,lx2160a-fspi" + - reg : First contains the register location and length, + Second contains the memory mapping address and length + - reg-names : Should contain the resource reg names: + - fspi_base: configuration register address space + - fspi_mmap: memory mapped address space + - interrupts : Should contain the interrupt for the device + +Required SPI slave node properties: + - reg : There are two buses (A and B) with two chip selects each. + This encodes to which bus and CS the flash is connected: + - <0>: Bus A, CS 0 + - <1>: Bus A, CS 1 + - <2>: Bus B, CS 0 + - <3>: Bus B, CS 1 + +Example showing the usage of two SPI NOR slave devices on bus A: + +fspi0: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + + mt35xu512aba0: flash@0 { + reg = <0>; + .... + }; + + mt35xu512aba1: flash@1 { + reg = <1>; + .... + }; +}; diff --git a/Bindings/spi/spi-sifive.txt b/Bindings/spi/spi-sifive.txt new file mode 100644 index 000000000000..3f5c6e438972 --- /dev/null +++ b/Bindings/spi/spi-sifive.txt @@ -0,0 +1,37 @@ +SiFive SPI controller Device Tree Bindings +------------------------------------------ + +Required properties: +- compatible : Should be "sifive,-spi" and "sifive,spi". + Supported compatible strings are: + "sifive,fu540-c000-spi" for the SiFive SPI v0 as integrated + onto the SiFive FU540 chip, and "sifive,spi0" for the SiFive + SPI v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details +- reg : Physical base address and size of SPI registers map + A second (optional) range can indicate memory mapped flash +- interrupts : Must contain one entry +- interrupt-parent : Must be core interrupt controller +- clocks : Must reference the frequency given to the controller +- #address-cells : Must be '1', indicating which CS to use +- #size-cells : Must be '0' + +Optional properties: +- sifive,fifo-depth : Depth of hardware queues; defaults to 8 +- sifive,max-bits-per-word : Maximum bits per word; defaults to 8 + +SPI RTL that corresponds to the IP block version numbers can be found here: +https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/spi + +Example: + spi: spi@10040000 { + compatible = "sifive,fu540-c000-spi", "sifive,spi0"; + reg = <0x0 0x10040000 0x0 0x1000 0x0 0x20000000 0x0 0x10000000>; + interrupt-parent = <&plic>; + interrupts = <51>; + clocks = <&tlclk>; + #address-cells = <1>; + #size-cells = <0>; + sifive,fifo-depth = <8>; + sifive,max-bits-per-word = <8>; + }; diff --git a/Bindings/spi/spi-sprd.txt b/Bindings/spi/spi-sprd.txt index bad211a19da4..3c7eacce0ee3 100644 --- a/Bindings/spi/spi-sprd.txt +++ b/Bindings/spi/spi-sprd.txt @@ -14,6 +14,11 @@ Required properties: address on the SPI bus. Should be set to 1. - #size-cells: Should be set to 0. +Optional properties: +dma-names: Should contain names of the SPI used DMA channel. +dmas: Should contain DMA channels and DMA slave ids which the SPI used + sorted in the same order as the dma-names property. + Example: spi0: spi@70a00000{ compatible = "sprd,sc9860-spi"; @@ -21,6 +26,8 @@ spi0: spi@70a00000{ interrupts = ; clock-names = "spi", "source","enable"; clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>; + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11 11>, <&apdma 12 12>; #address-cells = <1>; #size-cells = <0>; }; diff --git a/Bindings/spi/spi-stm32.txt b/Bindings/spi/spi-stm32.txt index 1b3fa2c119d5..d82755c63eaf 100644 --- a/Bindings/spi/spi-stm32.txt +++ b/Bindings/spi/spi-stm32.txt @@ -7,7 +7,9 @@ from 4 to 32-bit data size. Although it can be configured as master or slave, only master is supported by the driver. Required properties: -- compatible: Must be "st,stm32h7-spi". +- compatible: Should be one of: + "st,stm32h7-spi" + "st,stm32f4-spi" - reg: Offset and length of the device's register set. - interrupts: Must contain the interrupt id. - clocks: Must contain an entry for spiclk (which feeds the internal clock @@ -30,8 +32,9 @@ Child nodes represent devices on the SPI bus See ../spi/spi-bus.txt Optional properties: -- st,spi-midi-ns: (Master Inter-Data Idleness) minimum time delay in - nanoseconds inserted between two consecutive data frames. +- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time + delay in nanoseconds inserted between two consecutive data + frames. Example: diff --git a/Bindings/sram/milbeaut-smp-sram.txt b/Bindings/sram/milbeaut-smp-sram.txt new file mode 100644 index 000000000000..194f6a3c1c1e --- /dev/null +++ b/Bindings/sram/milbeaut-smp-sram.txt @@ -0,0 +1,24 @@ +Milbeaut SRAM for smp bringup + +Milbeaut SoCs use a part of the sram for the bringup of the secondary cores. +Once they get powered up in the bootloader, they stay at the specific part +of the sram. +Therefore the part needs to be added as the sub-node of mmio-sram. + +Required sub-node properties: +- compatible : should be "socionext,milbeaut-smp-sram" + +Example: + + sram: sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + }; diff --git a/Bindings/sram/sunxi-sram.txt b/Bindings/sram/sunxi-sram.txt index ab5a70bb9a64..380246a805f2 100644 --- a/Bindings/sram/sunxi-sram.txt +++ b/Bindings/sram/sunxi-sram.txt @@ -63,6 +63,7 @@ The valid sections compatible for H5 are: The valid sections compatible for H6 are: - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c + - allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1 The valid sections compatible for F1C100s are: - allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d diff --git a/Bindings/thermal/brcm,sr-thermal.txt b/Bindings/thermal/brcm,sr-thermal.txt new file mode 100644 index 000000000000..3ab330219d45 --- /dev/null +++ b/Bindings/thermal/brcm,sr-thermal.txt @@ -0,0 +1,105 @@ +* Broadcom Stingray Thermal + +This binding describes thermal sensors that is part of Stingray SoCs. + +Required properties: +- compatible : Must be "brcm,sr-thermal" +- reg : Memory where tmon data will be available. +- brcm,tmon-mask: A one cell bit mask of valid TMON sources. + Each bit represents single TMON source. +- #thermal-sensor-cells : Thermal sensor phandler +- polling-delay: Max number of milliseconds to wait between polls. +- thermal-sensors: A list of thermal sensor phandles and specifier. + specifier value is tmon ID and it should be + in correspond with brcm,tmon-mask. +- temperature: trip temperature threshold in millicelsius. + +Example: + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: tmon@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; diff --git a/Bindings/thermal/mediatek-thermal.txt b/Bindings/thermal/mediatek-thermal.txt index 41d6a443ad66..f8d7831f3974 100644 --- a/Bindings/thermal/mediatek-thermal.txt +++ b/Bindings/thermal/mediatek-thermal.txt @@ -13,6 +13,7 @@ Required properties: - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - "mediatek,mt2712-thermal" : For MT2712 family of SoCs - "mediatek,mt7622-thermal" : For MT7622 SoC + - "mediatek,mt8183-thermal" : For MT8183 family of SoCs - reg: Address range of the thermal controller - interrupts: IRQ for the thermal controller - clocks, clock-names: Clocks needed for the thermal controller. required diff --git a/Bindings/timer/fsl,imxgpt.txt b/Bindings/timer/fsl,imxgpt.txt index 9809b11f7180..5d8fd5b52598 100644 --- a/Bindings/timer/fsl,imxgpt.txt +++ b/Bindings/timer/fsl,imxgpt.txt @@ -2,17 +2,44 @@ Freescale i.MX General Purpose Timer (GPT) Required properties: -- compatible : should be "fsl,-gpt" -- reg : Specifies base physical address and size of the registers. -- interrupts : A list of 4 interrupts; one per timer channel. -- clocks : The clocks provided by the SoC to drive the timer. +- compatible : should be one of following: + for i.MX1: + - "fsl,imx1-gpt"; + for i.MX21: + - "fsl,imx21-gpt"; + for i.MX27: + - "fsl,imx27-gpt", "fsl,imx21-gpt"; + for i.MX31: + - "fsl,imx31-gpt"; + for i.MX25: + - "fsl,imx25-gpt", "fsl,imx31-gpt"; + for i.MX50: + - "fsl,imx50-gpt", "fsl,imx31-gpt"; + for i.MX51: + - "fsl,imx51-gpt", "fsl,imx31-gpt"; + for i.MX53: + - "fsl,imx53-gpt", "fsl,imx31-gpt"; + for i.MX6Q: + - "fsl,imx6q-gpt", "fsl,imx31-gpt"; + for i.MX6DL: + - "fsl,imx6dl-gpt"; + for i.MX6SL: + - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt"; + for i.MX6SX: + - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; +- reg : specifies base physical address and size of the registers. +- interrupts : should be the gpt interrupt. +- clocks : the clocks provided by the SoC to drive the timer, must contain + an entry for each entry in clock-names. +- clock-names : must include "ipg" entry first, then "per" entry. Example: gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; diff --git a/Bindings/timer/mediatek,mtk-timer.txt b/Bindings/timer/mediatek,mtk-timer.txt index 18d4d0166c76..ff7c567a7972 100644 --- a/Bindings/timer/mediatek,mtk-timer.txt +++ b/Bindings/timer/mediatek,mtk-timer.txt @@ -1,7 +1,7 @@ -Mediatek Timers +MediaTek Timers --------------- -Mediatek SoCs have two different timers on different platforms, +MediaTek SoCs have two different timers on different platforms, - GPT (General Purpose Timer) - SYST (System Timer) @@ -9,6 +9,7 @@ The proper timer will be selected automatically by driver. Required properties: - compatible should contain: + For those SoCs that use GPT * "mediatek,mt2701-timer" for MT2701 compatible timers (GPT) * "mediatek,mt6580-timer" for MT6580 compatible timers (GPT) * "mediatek,mt6589-timer" for MT6589 compatible timers (GPT) @@ -17,7 +18,11 @@ Required properties: * "mediatek,mt8135-timer" for MT8135 compatible timers (GPT) * "mediatek,mt8173-timer" for MT8173 compatible timers (GPT) * "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT) - * "mediatek,mt6765-timer" for MT6765 compatible timers (SYST) + + For those SoCs that use SYST + * "mediatek,mt7629-timer" for MT7629 compatible timers (SYST) + * "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST) + - reg: Should contain location and length for timer register. - clocks: Should contain system clock. diff --git a/Bindings/timer/nvidia,tegra210-timer.txt b/Bindings/timer/nvidia,tegra210-timer.txt new file mode 100644 index 000000000000..032cda96fe0d --- /dev/null +++ b/Bindings/timer/nvidia,tegra210-timer.txt @@ -0,0 +1,36 @@ +NVIDIA Tegra210 timer + +The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived +from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, +or watchdog interrupts. + +Required properties: +- compatible : "nvidia,tegra210-timer". +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 14 interrupts; one per each timer channels 0 through + 13. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +timer@60005000 { + compatible = "nvidia,tegra210-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&tegra_car TEGRA210_CLK_TIMER>; + clock-names = "timer"; +}; diff --git a/Bindings/timer/renesas,cmt.txt b/Bindings/timer/renesas,cmt.txt index 862a80f0380a..c0594450e9ef 100644 --- a/Bindings/timer/renesas,cmt.txt +++ b/Bindings/timer/renesas,cmt.txt @@ -32,6 +32,8 @@ Required Properties: - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470. - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1. - "renesas,r8a774a1-cmt1" for the 48-bit CMT1 device included in r8a774a1. + - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0. + - "renesas,r8a774c0-cmt1" for the 48-bit CMT1 device included in r8a774c0. - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. diff --git a/Bindings/timer/renesas,tmu.txt b/Bindings/timer/renesas,tmu.txt index 4ddff85837da..13ad07416bdd 100644 --- a/Bindings/timer/renesas,tmu.txt +++ b/Bindings/timer/renesas,tmu.txt @@ -10,6 +10,7 @@ Required Properties: - compatible: must contain one or more of the following: - "renesas,tmu-r8a7740" for the r8a7740 TMU + - "renesas,tmu-r8a774c0" for the r8a774C0 TMU - "renesas,tmu-r8a7778" for the r8a7778 TMU - "renesas,tmu-r8a7779" for the r8a7779 TMU - "renesas,tmu-r8a77970" for the r8a77970 TMU diff --git a/Bindings/timer/socionext,milbeaut-timer.txt b/Bindings/timer/socionext,milbeaut-timer.txt new file mode 100644 index 000000000000..ac44c4b67530 --- /dev/null +++ b/Bindings/timer/socionext,milbeaut-timer.txt @@ -0,0 +1,17 @@ +Milbeaut SoCs Timer Controller + +Required properties: + +- compatible : should be "socionext,milbeaut-timer". +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupt of the first timer. +- clocks: phandle to the input clk. + +Example: + +timer { + compatible = "socionext,milbeaut-timer"; + reg = <0x1e000050 0x20> + interrupts = <0 91 4>; + clocks = <&clk 4>; +}; diff --git a/Bindings/trivial-devices.yaml b/Bindings/trivial-devices.yaml index cc64ec63a6ad..d79fb22bde39 100644 --- a/Bindings/trivial-devices.yaml +++ b/Bindings/trivial-devices.yaml @@ -322,6 +322,8 @@ properties: - ti,ads7830 # Temperature Monitoring and Fan Control - ti,amc6821 + # Temperature sensor with integrated fan control + - ti,lm96000 # I2C Touch-Screen Controller - ti,tsc2003 # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Bindings/ufs/ufs-hisi.txt b/Bindings/ufs/ufs-hisi.txt index a48c44817367..0b83df1a5418 100644 --- a/Bindings/ufs/ufs-hisi.txt +++ b/Bindings/ufs/ufs-hisi.txt @@ -6,9 +6,10 @@ Each UFS Host Controller should have its own node. Required properties: - compatible : compatible list, contains one of the following - "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs - host controller present on Hi36xx chipset. + host controller present on Hi3660 chipset. + "hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs + host controller present on Hi3670 chipset. - reg : should contain UFS register address space & UFS SYS CTRL register address, -- interrupt-parent : interrupt device - interrupts : interrupt number - clocks : List of phandle and clock specifier pairs - clock-names : List of clock input name strings sorted in the same diff --git a/Bindings/ufs/ufshcd-pltfrm.txt b/Bindings/ufs/ufshcd-pltfrm.txt index 8cf59452c675..5111e9130bc3 100644 --- a/Bindings/ufs/ufshcd-pltfrm.txt +++ b/Bindings/ufs/ufshcd-pltfrm.txt @@ -4,11 +4,14 @@ UFSHC nodes are defined to describe on-chip UFS host controllers. Each UFS controller instance should have its own node. Required properties: -- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may - also list one or more of the following: - "qcom,msm8994-ufshc" - "qcom,msm8996-ufshc" - "qcom,ufshc" +- compatible : must contain "jedec,ufs-1.1" or "jedec,ufs-2.0" + + For Qualcomm SoCs must contain, as below, an + SoC-specific compatible along with "qcom,ufshc" and + the appropriate jedec string: + "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0" + "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0" - interrupts : - reg : diff --git a/Bindings/usb/ci-hdrc-usb2.txt b/Bindings/usb/ci-hdrc-usb2.txt index adae82385dd6..a254386a91ad 100644 --- a/Bindings/usb/ci-hdrc-usb2.txt +++ b/Bindings/usb/ci-hdrc-usb2.txt @@ -93,6 +93,7 @@ i.mx specific properties - over-current-active-low: over current signal polarity is active low. - over-current-active-high: over current signal polarity is active high. It's recommended to specify the over current polarity. +- power-active-high: power signal polarity is active high - external-vbus-divider: enables off-chip resistor divider for Vbus Example: diff --git a/Bindings/usb/ingenic,jz4740-musb.txt b/Bindings/usb/ingenic,jz4740-musb.txt new file mode 100644 index 000000000000..620355cee63f --- /dev/null +++ b/Bindings/usb/ingenic,jz4740-musb.txt @@ -0,0 +1,24 @@ +Ingenic JZ4740 MUSB driver + +Required properties: + +- compatible: Must be "ingenic,jz4740-musb" +- reg: Address range of the UDC register set +- interrupts: IRQ number related to the UDC hardware +- interrupt-names: must be "mc" +- clocks: phandle to the "udc" clock +- clock-names: must be "udc" + +Example: + +udc: usb@13040000 { + compatible = "ingenic,jz4740-musb"; + reg = <0x13040000 0x10000>; + + interrupt-parent = <&intc>; + interrupts = <24>; + interrupt-names = "mc"; + + clocks = <&cgu JZ4740_CLK_UDC>; + clock-names = "udc"; +}; diff --git a/Bindings/usb/keystone-usb.txt b/Bindings/usb/keystone-usb.txt index f96e09f784cc..77df82e36138 100644 --- a/Bindings/usb/keystone-usb.txt +++ b/Bindings/usb/keystone-usb.txt @@ -3,7 +3,9 @@ TI Keystone Soc USB Controller DWC3 GLUE Required properties: - - compatible: should be "ti,keystone-dwc3". + - compatible: should be + "ti,keystone-dwc3" for Keystone 2 SoCs + "ti,am654-dwc3" for AM654 SoC - #address-cells, #size-cells : should be '1' if the device has sub-nodes with 'reg' property. - reg : Address and length of the register set for the USB subsystem on @@ -21,7 +23,7 @@ SoCs only: - clock-names: Must be "usb". -The following are mandatory properties for Keystone 2 66AK2G SoCs only: +The following are mandatory properties for 66AK2G and AM654: - power-domains: Should contain a phandle to a PM domain provider node and an args specifier containing the USB device id diff --git a/Bindings/usb/qcom,dwc3.txt b/Bindings/usb/qcom,dwc3.txt index 95afdcf3c337..cb695aa3fba4 100644 --- a/Bindings/usb/qcom,dwc3.txt +++ b/Bindings/usb/qcom,dwc3.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Compatible list, contains "qcom,dwc3" "qcom,msm8996-dwc3" for msm8996 SOC. + "qcom,msm8998-dwc3" for msm8998 SOC. "qcom,sdm845-dwc3" for sdm845 SOC. - reg: Offset and length of register set for QSCRATCH wrapper - power-domains: specifies a phandle to PM domain provider node diff --git a/Bindings/usb/renesas_usb3.txt b/Bindings/usb/renesas_usb3.txt index d366555166d0..35039e720515 100644 --- a/Bindings/usb/renesas_usb3.txt +++ b/Bindings/usb/renesas_usb3.txt @@ -3,6 +3,7 @@ Renesas Electronics USB3.0 Peripheral driver Required properties: - compatible: Must contain one of the following: - "renesas,r8a774a1-usb3-peri" + - "renesas,r8a774c0-usb3-peri" - "renesas,r8a7795-usb3-peri" - "renesas,r8a7796-usb3-peri" - "renesas,r8a77965-usb3-peri" diff --git a/Bindings/usb/renesas_usbhs.txt b/Bindings/usb/renesas_usbhs.txt index 90719f501852..d93b6a1504f2 100644 --- a/Bindings/usb/renesas_usbhs.txt +++ b/Bindings/usb/renesas_usbhs.txt @@ -7,6 +7,7 @@ Required properties: - "renesas,usbhs-r8a7744" for r8a7744 (RZ/G1N) compatible device - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - "renesas,usbhs-r8a774a1" for r8a774a1 (RZ/G2M) compatible device + - "renesas,usbhs-r8a774c0" for r8a774c0 (RZ/G2E) compatible device - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device diff --git a/Bindings/usb/usb251xb.txt b/Bindings/usb/usb251xb.txt index 168ff819e827..17915f64b8ee 100644 --- a/Bindings/usb/usb251xb.txt +++ b/Bindings/usb/usb251xb.txt @@ -64,6 +64,8 @@ Optional properties : - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). + - swap-dx-lanes : Specifies the ports which will swap the differential-pair + (D+/D-), default is not-swapped. Examples: usb2512b@2c { @@ -81,4 +83,6 @@ Examples: manufacturer = "Foo"; product = "Foo-Bar"; serial = "1234567890A"; + /* correct misplaced usb connectors on port 1,2 */ + swap-dx-lanes = <1 2>; }; diff --git a/Bindings/vendor-prefixes.txt b/Bindings/vendor-prefixes.txt index 389508584f48..8162b0eb4b50 100644 --- a/Bindings/vendor-prefixes.txt +++ b/Bindings/vendor-prefixes.txt @@ -24,6 +24,7 @@ amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amediatech Shenzhen Amediatech Technology Co., Ltd amlogic Amlogic, Inc. ampire Ampire Co., Ltd. ams AMS AG @@ -65,6 +66,7 @@ bticino Bticino International calxeda Calxeda capella Capella Microsystems, Inc cascoda Cascoda, Ltd. +catalyst Catalyst Semiconductor, Inc. cavium Cavium, Inc. cdns Cadence Design Systems Inc. cdtech CDTech(H.K.) Electronics Limited @@ -108,11 +110,13 @@ dongwoon Dongwoon Anatech dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB +ebs-systart EBS-SYSTART GmbH ebv EBV Elektronik eckelmann Eckelmann AG edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. +elgin Elgin S/A. embest Shenzhen Embest Technology Co., Ltd. emlid Emlid, Ltd. emmicro EM Microelectronic @@ -136,11 +140,13 @@ fairphone Fairphone B.V. faraday Faraday Technology Corporation fastrax Fastrax Oy fcs Fairchild Semiconductor +feiyang Shenzhen Fly Young Technology Co.,LTD. firefly Firefly focaltech FocalTech Systems Co.,Ltd friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd fsl Freescale Semiconductor fujitsu Fujitsu Ltd. +gateworks Gateworks Corporation gcw Game Consoles Worldwide ge General Electric Company geekbuying GeekBuying @@ -150,6 +156,7 @@ geniatech Geniatech, Inc. giantec Giantec Semiconductor, Inc. giantplus Giantplus Technology Co., Ltd. globalscale Globalscale Technologies, Inc. +globaltop GlobalTop Technology, Inc. gmt Global Mixed-mode Technology, Inc. goodix Shenzhen Huiding Technology Co., Ltd. google Google, Inc. @@ -211,6 +218,7 @@ laird Laird PLC lantiq Lantiq Semiconductor lattice Lattice Semiconductor lego LEGO Systems A/S +lemaker Shenzhen LeMaker Technology Co., Ltd. lenovo Lenovo Group Ltd. lg LG Corporation libretech Shenzhen Libre Technology Co., Ltd @@ -273,6 +281,7 @@ nintendo Nintendo nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor +novtech NovTech, Inc. nutsboard NutsBoard nuvoton Nuvoton Technology Corporation nvd New Vision Display @@ -297,6 +306,7 @@ ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. panasonic Panasonic Corporation parade Parade Technologies Inc. +pda Precision Design Associates, Inc. pericom Pericom Technology Inc. pervasive Pervasive Displays, Inc. phicomm PHICOMM Co., Ltd. @@ -304,6 +314,7 @@ phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd +plantower Plantower Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA plx Broadcom Corporation (formerly PLX Technology) @@ -390,6 +401,7 @@ tcl Toby Churchill Ltd. technexion TechNexion technologic Technologic Systems tempo Tempo Semiconductor +techstar Shenzhen Techstar Electronics Co., Ltd. terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments @@ -430,6 +442,7 @@ vot Vision Optical Technology Co., Ltd. wd Western Digital Corp. wetek WeTek Electronics, limited. wexler Wexler +whwave Shenzhen whwave Electronics, Inc. wi2wi Wi2Wi, Inc. winbond Winbond Electronics corp. winstar Winstar Display Corp. diff --git a/Bindings/watchdog/renesas-wdt.txt b/Bindings/watchdog/renesas-wdt.txt index ef2b97b72e08..9f365c1a3399 100644 --- a/Bindings/watchdog/renesas-wdt.txt +++ b/Bindings/watchdog/renesas-wdt.txt @@ -8,6 +8,7 @@ Required properties: - "renesas,r8a7743-wdt" (RZ/G1M) - "renesas,r8a7744-wdt" (RZ/G1N) - "renesas,r8a7745-wdt" (RZ/G1E) + - "renesas,r8a77470-wdt" (RZ/G1C) - "renesas,r8a774a1-wdt" (RZ/G2M) - "renesas,r8a774c0-wdt" (RZ/G2E) - "renesas,r8a7790-wdt" (R-Car H2) diff --git a/Bindings/watchdog/st,stpmic1-wdt.txt b/Bindings/watchdog/st,stpmic1-wdt.txt new file mode 100644 index 000000000000..7cc1407f15cb --- /dev/null +++ b/Bindings/watchdog/st,stpmic1-wdt.txt @@ -0,0 +1,11 @@ +STMicroelectronics STPMIC1 Watchdog + +Required properties: + +- compatible : should be "st,stpmic1-wdt" + +Example: + +watchdog { + compatible = "st,stpmic1-wdt"; +}; diff --git a/include/dt-bindings/clk/lochnagar.h b/include/dt-bindings/clk/lochnagar.h new file mode 100644 index 000000000000..8fa20551ff17 --- /dev/null +++ b/include/dt-bindings/clk/lochnagar.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Device Tree defines for Lochnagar clocking + * + * Copyright (c) 2017-2018 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + * + * Author: Charles Keepax + */ + +#ifndef DT_BINDINGS_CLK_LOCHNAGAR_H +#define DT_BINDINGS_CLK_LOCHNAGAR_H + +#define LOCHNAGAR_CDC_MCLK1 0 +#define LOCHNAGAR_CDC_MCLK2 1 +#define LOCHNAGAR_DSP_CLKIN 2 +#define LOCHNAGAR_GF_CLKOUT1 3 +#define LOCHNAGAR_GF_CLKOUT2 4 +#define LOCHNAGAR_PSIA1_MCLK 5 +#define LOCHNAGAR_PSIA2_MCLK 6 +#define LOCHNAGAR_SPDIF_MCLK 7 +#define LOCHNAGAR_ADAT_MCLK 8 +#define LOCHNAGAR_SOUNDCARD_MCLK 9 +#define LOCHNAGAR_SPDIF_CLKOUT 10 + +#endif diff --git a/include/dt-bindings/clock/actions,s500-cmu.h b/include/dt-bindings/clock/actions,s500-cmu.h new file mode 100644 index 000000000000..030981cd2d56 --- /dev/null +++ b/include/dt-bindings/clock/actions,s500-cmu.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Device Tree binding constants for Actions Semi S500 Clock Management Unit + * + * Copyright (c) 2014 Actions Semi Inc. + * Copyright (c) 2018 LSI-TEC - Caninos Loucos + */ + +#ifndef __DT_BINDINGS_CLOCK_S500_CMU_H +#define __DT_BINDINGS_CLOCK_S500_CMU_H + +#define CLK_NONE 0 + +/* fixed rate clocks */ +#define CLK_LOSC 1 +#define CLK_HOSC 2 + +/* pll clocks */ +#define CLK_CORE_PLL 3 +#define CLK_DEV_PLL 4 +#define CLK_DDR_PLL 5 +#define CLK_NAND_PLL 6 +#define CLK_DISPLAY_PLL 7 +#define CLK_ETHERNET_PLL 8 +#define CLK_AUDIO_PLL 9 + +/* system clock */ +#define CLK_DEV 10 +#define CLK_H 11 +#define CLK_AHBPREDIV 12 +#define CLK_AHB 13 +#define CLK_DE 14 +#define CLK_BISP 15 +#define CLK_VCE 16 +#define CLK_VDE 17 + +/* peripheral device clock */ +#define CLK_TIMER 18 +#define CLK_I2C0 19 +#define CLK_I2C1 20 +#define CLK_I2C2 21 +#define CLK_I2C3 22 +#define CLK_PWM0 23 +#define CLK_PWM1 24 +#define CLK_PWM2 25 +#define CLK_PWM3 26 +#define CLK_PWM4 27 +#define CLK_PWM5 28 +#define CLK_SD0 29 +#define CLK_SD1 30 +#define CLK_SD2 31 +#define CLK_SENSOR0 32 +#define CLK_SENSOR1 33 +#define CLK_SPI0 34 +#define CLK_SPI1 35 +#define CLK_SPI2 36 +#define CLK_SPI3 37 +#define CLK_UART0 38 +#define CLK_UART1 39 +#define CLK_UART2 40 +#define CLK_UART3 41 +#define CLK_UART4 42 +#define CLK_UART5 43 +#define CLK_UART6 44 +#define CLK_DE1 45 +#define CLK_DE2 46 +#define CLK_I2SRX 47 +#define CLK_I2STX 48 +#define CLK_HDMI_AUDIO 49 +#define CLK_HDMI 50 +#define CLK_SPDIF 51 +#define CLK_NAND 52 +#define CLK_ECC 53 +#define CLK_RMII_REF 54 + +#define CLK_NR_CLKS (CLK_RMII_REF + 1) + +#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */ diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h index 27359ad83904..dcc679a7ad85 100644 --- a/include/dt-bindings/clock/ath79-clk.h +++ b/include/dt-bindings/clock/ath79-clk.h @@ -13,7 +13,9 @@ #define ATH79_CLK_CPU 0 #define ATH79_CLK_DDR 1 #define ATH79_CLK_AHB 2 +#define ATH79_CLK_REF 3 +#define ATH79_CLK_MDIO 4 -#define ATH79_CLK_END 3 +#define ATH79_CLK_END 5 #endif /* __DT_BINDINGS_ATH79_CLK_H */ diff --git a/include/dt-bindings/clock/axg-aoclkc.h b/include/dt-bindings/clock/axg-aoclkc.h index 61955016a55b..8ec4a269c7a6 100644 --- a/include/dt-bindings/clock/axg-aoclkc.h +++ b/include/dt-bindings/clock/axg-aoclkc.h @@ -21,6 +21,11 @@ #define CLKID_AO_SAR_ADC_SEL 8 #define CLKID_AO_SAR_ADC_DIV 9 #define CLKID_AO_SAR_ADC_CLK 10 -#define CLKID_AO_ALT_XTAL 11 +#define CLKID_AO_CTS_OSCIN 11 +#define CLKID_AO_32K_PRE 12 +#define CLKID_AO_32K_DIV 13 +#define CLKID_AO_32K_SEL 14 +#define CLKID_AO_32K 15 +#define CLKID_AO_CTS_RTC_OSCIN 16 #endif diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h index 98bd85ce1e45..25ffa53573a5 100644 --- a/include/dt-bindings/clock/exynos5433.h +++ b/include/dt-bindings/clock/exynos5433.h @@ -156,7 +156,7 @@ #define CLK_ACLK_G2D_266 220 #define CLK_ACLK_G2D_400 221 #define CLK_ACLK_G3D_400 222 -#define CLK_ACLK_IMEM_SSX_266 223 +#define CLK_ACLK_IMEM_SSSX_266 223 #define CLK_ACLK_BUS0_400 224 #define CLK_ACLK_BUS1_400 225 #define CLK_ACLK_IMEM_200 226 @@ -1406,4 +1406,10 @@ #define CAM1_NR_CLK 113 +/* CMU_IMEM */ +#define CLK_ACLK_SLIMSSS 2 +#define CLK_PCLK_SLIMSSS 35 + +#define IMEM_NR_CLK 36 + #endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */ diff --git a/include/dt-bindings/clock/g12a-aoclkc.h b/include/dt-bindings/clock/g12a-aoclkc.h new file mode 100644 index 000000000000..8db01ffbeb06 --- /dev/null +++ b/include/dt-bindings/clock/g12a-aoclkc.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong + * + * Copyright (c) 2018 Amlogic, inc. + * Author: Qiufang Dai + */ + +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK + +#define CLKID_AO_AHB 0 +#define CLKID_AO_IR_IN 1 +#define CLKID_AO_I2C_M0 2 +#define CLKID_AO_I2C_S0 3 +#define CLKID_AO_UART 4 +#define CLKID_AO_PROD_I2C 5 +#define CLKID_AO_UART2 6 +#define CLKID_AO_IR_OUT 7 +#define CLKID_AO_SAR_ADC 8 +#define CLKID_AO_MAILBOX 9 +#define CLKID_AO_M3 10 +#define CLKID_AO_AHB_SRAM 11 +#define CLKID_AO_RTI 12 +#define CLKID_AO_M4_FCLK 13 +#define CLKID_AO_M4_HCLK 14 +#define CLKID_AO_CLK81 15 +#define CLKID_AO_SAR_ADC_CLK 18 +#define CLKID_AO_32K 23 +#define CLKID_AO_CEC 27 +#define CLKID_AO_CTS_RTC_OSCIN 28 + +#endif diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h new file mode 100644 index 000000000000..83b657038d1e --- /dev/null +++ b/include/dt-bindings/clock/g12a-clkc.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */ +/* + * Meson-G12A clock tree IDs + * + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#ifndef __G12A_CLKC_H +#define __G12A_CLKC_H + +#define CLKID_SYS_PLL 0 +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 2 +#define CLKID_FCLK_DIV3 3 +#define CLKID_FCLK_DIV4 4 +#define CLKID_FCLK_DIV5 5 +#define CLKID_FCLK_DIV7 6 +#define CLKID_GP0_PLL 7 +#define CLKID_CLK81 10 +#define CLKID_MPLL0 11 +#define CLKID_MPLL1 12 +#define CLKID_MPLL2 13 +#define CLKID_MPLL3 14 +#define CLKID_DDR 15 +#define CLKID_DOS 16 +#define CLKID_AUDIO_LOCKER 17 +#define CLKID_MIPI_DSI_HOST 18 +#define CLKID_ETH_PHY 19 +#define CLKID_ISA 20 +#define CLKID_PL301 21 +#define CLKID_PERIPHS 22 +#define CLKID_SPICC0 23 +#define CLKID_I2C 24 +#define CLKID_SANA 25 +#define CLKID_SD 26 +#define CLKID_RNG0 27 +#define CLKID_UART0 28 +#define CLKID_SPICC1 29 +#define CLKID_HIU_IFACE 30 +#define CLKID_MIPI_DSI_PHY 31 +#define CLKID_ASSIST_MISC 32 +#define CLKID_SD_EMMC_A 33 +#define CLKID_SD_EMMC_B 34 +#define CLKID_SD_EMMC_C 35 +#define CLKID_AUDIO_CODEC 36 +#define CLKID_AUDIO 37 +#define CLKID_ETH 38 +#define CLKID_DEMUX 39 +#define CLKID_AUDIO_IFIFO 40 +#define CLKID_ADC 41 +#define CLKID_UART1 42 +#define CLKID_G2D 43 +#define CLKID_RESET 44 +#define CLKID_PCIE_COMB 45 +#define CLKID_PARSER 46 +#define CLKID_USB 47 +#define CLKID_PCIE_PHY 48 +#define CLKID_AHB_ARB0 49 +#define CLKID_AHB_DATA_BUS 50 +#define CLKID_AHB_CTRL_BUS 51 +#define CLKID_HTX_HDCP22 52 +#define CLKID_HTX_PCLK 53 +#define CLKID_BT656 54 +#define CLKID_USB1_DDR_BRIDGE 55 +#define CLKID_MMC_PCLK 56 +#define CLKID_UART2 57 +#define CLKID_VPU_INTR 58 +#define CLKID_GIC 59 +#define CLKID_SD_EMMC_A_CLK0 60 +#define CLKID_SD_EMMC_B_CLK0 61 +#define CLKID_SD_EMMC_C_CLK0 62 +#define CLKID_HIFI_PLL 74 +#define CLKID_VCLK2_VENCI0 80 +#define CLKID_VCLK2_VENCI1 81 +#define CLKID_VCLK2_VENCP0 82 +#define CLKID_VCLK2_VENCP1 83 +#define CLKID_VCLK2_VENCT0 84 +#define CLKID_VCLK2_VENCT1 85 +#define CLKID_VCLK2_OTHER 86 +#define CLKID_VCLK2_ENCI 87 +#define CLKID_VCLK2_ENCP 88 +#define CLKID_DAC_CLK 89 +#define CLKID_AOCLK 90 +#define CLKID_IEC958 91 +#define CLKID_ENC480P 92 +#define CLKID_RNG1 93 +#define CLKID_VCLK2_ENCT 94 +#define CLKID_VCLK2_ENCL 95 +#define CLKID_VCLK2_VENCLMMC 96 +#define CLKID_VCLK2_VENCL 97 +#define CLKID_VCLK2_OTHER1 98 +#define CLKID_FCLK_DIV2P5 99 +#define CLKID_DMA 105 +#define CLKID_EFUSE 106 +#define CLKID_ROM_BOOT 107 +#define CLKID_RESET_SEC 108 +#define CLKID_SEC_AHB_APB3 109 +#define CLKID_VPU_0_SEL 110 +#define CLKID_VPU_0 112 +#define CLKID_VPU_1_SEL 113 +#define CLKID_VPU_1 115 +#define CLKID_VPU 116 +#define CLKID_VAPB_0_SEL 117 +#define CLKID_VAPB_0 119 +#define CLKID_VAPB_1_SEL 120 +#define CLKID_VAPB_1 122 +#define CLKID_VAPB_SEL 123 +#define CLKID_VAPB 124 +#define CLKID_HDMI_PLL 128 +#define CLKID_VID_PLL 129 +#define CLKID_VCLK 138 +#define CLKID_VCLK2 139 +#define CLKID_VCLK_DIV1 148 +#define CLKID_VCLK_DIV2 149 +#define CLKID_VCLK_DIV4 150 +#define CLKID_VCLK_DIV6 151 +#define CLKID_VCLK_DIV12 152 +#define CLKID_VCLK2_DIV1 153 +#define CLKID_VCLK2_DIV2 154 +#define CLKID_VCLK2_DIV4 155 +#define CLKID_VCLK2_DIV6 156 +#define CLKID_VCLK2_DIV12 157 +#define CLKID_CTS_ENCI 162 +#define CLKID_CTS_ENCP 163 +#define CLKID_CTS_VDAC 164 +#define CLKID_HDMI_TX 165 +#define CLKID_HDMI 168 +#define CLKID_MALI_0_SEL 169 +#define CLKID_MALI_0 171 +#define CLKID_MALI_1_SEL 172 +#define CLKID_MALI_1 174 +#define CLKID_MALI 175 +#define CLKID_MPLL_5OM 177 + +#endif /* __G12A_CLKC_H */ diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h index 9d15e2221fdb..ec3b26319fc4 100644 --- a/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -63,5 +63,12 @@ #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 #define CLKID_AO_CEC_32K 6 +#define CLKID_AO_CTS_OSCIN 7 +#define CLKID_AO_32K_PRE 8 +#define CLKID_AO_32K_DIV 9 +#define CLKID_AO_32K_SEL 10 +#define CLKID_AO_32K 11 +#define CLKID_AO_CTS_RTC_OSCIN 12 +#define CLKID_AO_CLK81 13 #endif diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h index d382fc71aa83..a81be5be6700 100644 --- a/include/dt-bindings/clock/imx5-clock.h +++ b/include/dt-bindings/clock/imx5-clock.h @@ -214,6 +214,7 @@ #define IMX5_CLK_IEEE1588_SEL 202 #define IMX5_CLK_IEEE1588_PODF 203 #define IMX5_CLK_IEEE1588_GATE 204 -#define IMX5_CLK_END 205 +#define IMX5_CLK_SCC2_IPG_GATE 205 +#define IMX5_CLK_END 206 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */ diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h new file mode 100644 index 000000000000..1b4353e7b486 --- /dev/null +++ b/include/dt-bindings/clock/imx8mm-clock.h @@ -0,0 +1,244 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2017-2018 NXP + */ + +#ifndef __DT_BINDINGS_CLOCK_IMX8MM_H +#define __DT_BINDINGS_CLOCK_IMX8MM_H + +#define IMX8MM_CLK_DUMMY 0 +#define IMX8MM_CLK_32K 1 +#define IMX8MM_CLK_24M 2 +#define IMX8MM_OSC_HDMI_CLK 3 +#define IMX8MM_CLK_EXT1 4 +#define IMX8MM_CLK_EXT2 5 +#define IMX8MM_CLK_EXT3 6 +#define IMX8MM_CLK_EXT4 7 +#define IMX8MM_AUDIO_PLL1_REF_SEL 8 +#define IMX8MM_AUDIO_PLL2_REF_SEL 9 +#define IMX8MM_VIDEO_PLL1_REF_SEL 10 +#define IMX8MM_DRAM_PLL_REF_SEL 11 +#define IMX8MM_GPU_PLL_REF_SEL 12 +#define IMX8MM_VPU_PLL_REF_SEL 13 +#define IMX8MM_ARM_PLL_REF_SEL 14 +#define IMX8MM_SYS_PLL1_REF_SEL 15 +#define IMX8MM_SYS_PLL2_REF_SEL 16 +#define IMX8MM_SYS_PLL3_REF_SEL 17 +#define IMX8MM_AUDIO_PLL1 18 +#define IMX8MM_AUDIO_PLL2 19 +#define IMX8MM_VIDEO_PLL1 20 +#define IMX8MM_DRAM_PLL 21 +#define IMX8MM_GPU_PLL 22 +#define IMX8MM_VPU_PLL 23 +#define IMX8MM_ARM_PLL 24 +#define IMX8MM_SYS_PLL1 25 +#define IMX8MM_SYS_PLL2 26 +#define IMX8MM_SYS_PLL3 27 +#define IMX8MM_AUDIO_PLL1_BYPASS 28 +#define IMX8MM_AUDIO_PLL2_BYPASS 29 +#define IMX8MM_VIDEO_PLL1_BYPASS 30 +#define IMX8MM_DRAM_PLL_BYPASS 31 +#define IMX8MM_GPU_PLL_BYPASS 32 +#define IMX8MM_VPU_PLL_BYPASS 33 +#define IMX8MM_ARM_PLL_BYPASS 34 +#define IMX8MM_SYS_PLL1_BYPASS 35 +#define IMX8MM_SYS_PLL2_BYPASS 36 +#define IMX8MM_SYS_PLL3_BYPASS 37 +#define IMX8MM_AUDIO_PLL1_OUT 38 +#define IMX8MM_AUDIO_PLL2_OUT 39 +#define IMX8MM_VIDEO_PLL1_OUT 40 +#define IMX8MM_DRAM_PLL_OUT 41 +#define IMX8MM_GPU_PLL_OUT 42 +#define IMX8MM_VPU_PLL_OUT 43 +#define IMX8MM_ARM_PLL_OUT 44 +#define IMX8MM_SYS_PLL1_OUT 45 +#define IMX8MM_SYS_PLL2_OUT 46 +#define IMX8MM_SYS_PLL3_OUT 47 +#define IMX8MM_SYS_PLL1_40M 48 +#define IMX8MM_SYS_PLL1_80M 49 +#define IMX8MM_SYS_PLL1_100M 50 +#define IMX8MM_SYS_PLL1_133M 51 +#define IMX8MM_SYS_PLL1_160M 52 +#define IMX8MM_SYS_PLL1_200M 53 +#define IMX8MM_SYS_PLL1_266M 54 +#define IMX8MM_SYS_PLL1_400M 55 +#define IMX8MM_SYS_PLL1_800M 56 +#define IMX8MM_SYS_PLL2_50M 57 +#define IMX8MM_SYS_PLL2_100M 58 +#define IMX8MM_SYS_PLL2_125M 59 +#define IMX8MM_SYS_PLL2_166M 60 +#define IMX8MM_SYS_PLL2_200M 61 +#define IMX8MM_SYS_PLL2_250M 62 +#define IMX8MM_SYS_PLL2_333M 63 +#define IMX8MM_SYS_PLL2_500M 64 +#define IMX8MM_SYS_PLL2_1000M 65 + +/* core */ +#define IMX8MM_CLK_A53_SRC 66 +#define IMX8MM_CLK_M4_SRC 67 +#define IMX8MM_CLK_VPU_SRC 68 +#define IMX8MM_CLK_GPU3D_SRC 69 +#define IMX8MM_CLK_GPU2D_SRC 70 +#define IMX8MM_CLK_A53_CG 71 +#define IMX8MM_CLK_M4_CG 72 +#define IMX8MM_CLK_VPU_CG 73 +#define IMX8MM_CLK_GPU3D_CG 74 +#define IMX8MM_CLK_GPU2D_CG 75 +#define IMX8MM_CLK_A53_DIV 76 +#define IMX8MM_CLK_M4_DIV 77 +#define IMX8MM_CLK_VPU_DIV 78 +#define IMX8MM_CLK_GPU3D_DIV 79 +#define IMX8MM_CLK_GPU2D_DIV 80 + +/* bus */ +#define IMX8MM_CLK_MAIN_AXI 81 +#define IMX8MM_CLK_ENET_AXI 82 +#define IMX8MM_CLK_NAND_USDHC_BUS 83 +#define IMX8MM_CLK_VPU_BUS 84 +#define IMX8MM_CLK_DISP_AXI 85 +#define IMX8MM_CLK_DISP_APB 86 +#define IMX8MM_CLK_DISP_RTRM 87 +#define IMX8MM_CLK_USB_BUS 88 +#define IMX8MM_CLK_GPU_AXI 89 +#define IMX8MM_CLK_GPU_AHB 90 +#define IMX8MM_CLK_NOC 91 +#define IMX8MM_CLK_NOC_APB 92 + +#define IMX8MM_CLK_AHB 93 +#define IMX8MM_CLK_AUDIO_AHB 94 +#define IMX8MM_CLK_IPG_ROOT 95 +#define IMX8MM_CLK_IPG_AUDIO_ROOT 96 + +#define IMX8MM_CLK_DRAM_ALT 97 +#define IMX8MM_CLK_DRAM_APB 98 +#define IMX8MM_CLK_VPU_G1 99 +#define IMX8MM_CLK_VPU_G2 100 +#define IMX8MM_CLK_DISP_DTRC 101 +#define IMX8MM_CLK_DISP_DC8000 102 +#define IMX8MM_CLK_PCIE1_CTRL 103 +#define IMX8MM_CLK_PCIE1_PHY 104 +#define IMX8MM_CLK_PCIE1_AUX 105 +#define IMX8MM_CLK_DC_PIXEL 106 +#define IMX8MM_CLK_LCDIF_PIXEL 107 +#define IMX8MM_CLK_SAI1 108 +#define IMX8MM_CLK_SAI2 109 +#define IMX8MM_CLK_SAI3 110 +#define IMX8MM_CLK_SAI4 111 +#define IMX8MM_CLK_SAI5 112 +#define IMX8MM_CLK_SAI6 113 +#define IMX8MM_CLK_SPDIF1 114 +#define IMX8MM_CLK_SPDIF2 115 +#define IMX8MM_CLK_ENET_REF 116 +#define IMX8MM_CLK_ENET_TIMER 117 +#define IMX8MM_CLK_ENET_PHY_REF 118 +#define IMX8MM_CLK_NAND 119 +#define IMX8MM_CLK_QSPI 120 +#define IMX8MM_CLK_USDHC1 121 +#define IMX8MM_CLK_USDHC2 122 +#define IMX8MM_CLK_I2C1 123 +#define IMX8MM_CLK_I2C2 124 +#define IMX8MM_CLK_I2C3 125 +#define IMX8MM_CLK_I2C4 126 +#define IMX8MM_CLK_UART1 127 +#define IMX8MM_CLK_UART2 128 +#define IMX8MM_CLK_UART3 129 +#define IMX8MM_CLK_UART4 130 +#define IMX8MM_CLK_USB_CORE_REF 131 +#define IMX8MM_CLK_USB_PHY_REF 132 +#define IMX8MM_CLK_ECSPI1 133 +#define IMX8MM_CLK_ECSPI2 134 +#define IMX8MM_CLK_PWM1 135 +#define IMX8MM_CLK_PWM2 136 +#define IMX8MM_CLK_PWM3 137 +#define IMX8MM_CLK_PWM4 138 +#define IMX8MM_CLK_GPT1 139 +#define IMX8MM_CLK_WDOG 140 +#define IMX8MM_CLK_WRCLK 141 +#define IMX8MM_CLK_DSI_CORE 142 +#define IMX8MM_CLK_DSI_PHY_REF 143 +#define IMX8MM_CLK_DSI_DBI 144 +#define IMX8MM_CLK_USDHC3 145 +#define IMX8MM_CLK_CSI1_CORE 146 +#define IMX8MM_CLK_CSI1_PHY_REF 147 +#define IMX8MM_CLK_CSI1_ESC 148 +#define IMX8MM_CLK_CSI2_CORE 149 +#define IMX8MM_CLK_CSI2_PHY_REF 150 +#define IMX8MM_CLK_CSI2_ESC 151 +#define IMX8MM_CLK_PCIE2_CTRL 152 +#define IMX8MM_CLK_PCIE2_PHY 153 +#define IMX8MM_CLK_PCIE2_AUX 154 +#define IMX8MM_CLK_ECSPI3 155 +#define IMX8MM_CLK_PDM 156 +#define IMX8MM_CLK_VPU_H1 157 +#define IMX8MM_CLK_CLKO1 158 + +#define IMX8MM_CLK_ECSPI1_ROOT 159 +#define IMX8MM_CLK_ECSPI2_ROOT 160 +#define IMX8MM_CLK_ECSPI3_ROOT 161 +#define IMX8MM_CLK_ENET1_ROOT 162 +#define IMX8MM_CLK_GPT1_ROOT 163 +#define IMX8MM_CLK_I2C1_ROOT 164 +#define IMX8MM_CLK_I2C2_ROOT 165 +#define IMX8MM_CLK_I2C3_ROOT 166 +#define IMX8MM_CLK_I2C4_ROOT 167 +#define IMX8MM_CLK_OCOTP_ROOT 168 +#define IMX8MM_CLK_PCIE1_ROOT 169 +#define IMX8MM_CLK_PWM1_ROOT 170 +#define IMX8MM_CLK_PWM2_ROOT 171 +#define IMX8MM_CLK_PWM3_ROOT 172 +#define IMX8MM_CLK_PWM4_ROOT 173 +#define IMX8MM_CLK_QSPI_ROOT 174 +#define IMX8MM_CLK_NAND_ROOT 175 +#define IMX8MM_CLK_SAI1_ROOT 176 +#define IMX8MM_CLK_SAI1_IPG 177 +#define IMX8MM_CLK_SAI2_ROOT 178 +#define IMX8MM_CLK_SAI2_IPG 179 +#define IMX8MM_CLK_SAI3_ROOT 180 +#define IMX8MM_CLK_SAI3_IPG 181 +#define IMX8MM_CLK_SAI4_ROOT 182 +#define IMX8MM_CLK_SAI4_IPG 183 +#define IMX8MM_CLK_SAI5_ROOT 184 +#define IMX8MM_CLK_SAI5_IPG 185 +#define IMX8MM_CLK_SAI6_ROOT 186 +#define IMX8MM_CLK_SAI6_IPG 187 +#define IMX8MM_CLK_UART1_ROOT 188 +#define IMX8MM_CLK_UART2_ROOT 189 +#define IMX8MM_CLK_UART3_ROOT 190 +#define IMX8MM_CLK_UART4_ROOT 191 +#define IMX8MM_CLK_USB1_CTRL_ROOT 192 +#define IMX8MM_CLK_GPU3D_ROOT 193 +#define IMX8MM_CLK_USDHC1_ROOT 194 +#define IMX8MM_CLK_USDHC2_ROOT 195 +#define IMX8MM_CLK_WDOG1_ROOT 196 +#define IMX8MM_CLK_WDOG2_ROOT 197 +#define IMX8MM_CLK_WDOG3_ROOT 198 +#define IMX8MM_CLK_VPU_G1_ROOT 199 +#define IMX8MM_CLK_GPU_BUS_ROOT 200 +#define IMX8MM_CLK_VPU_H1_ROOT 201 +#define IMX8MM_CLK_VPU_G2_ROOT 202 +#define IMX8MM_CLK_PDM_ROOT 203 +#define IMX8MM_CLK_DISP_ROOT 204 +#define IMX8MM_CLK_DISP_AXI_ROOT 205 +#define IMX8MM_CLK_DISP_APB_ROOT 206 +#define IMX8MM_CLK_DISP_RTRM_ROOT 207 +#define IMX8MM_CLK_USDHC3_ROOT 208 +#define IMX8MM_CLK_TMU_ROOT 209 +#define IMX8MM_CLK_VPU_DEC_ROOT 210 +#define IMX8MM_CLK_SDMA1_ROOT 211 +#define IMX8MM_CLK_SDMA2_ROOT 212 +#define IMX8MM_CLK_SDMA3_ROOT 213 +#define IMX8MM_CLK_GPT_3M 214 +#define IMX8MM_CLK_ARM 215 +#define IMX8MM_CLK_PDM_IPG 216 +#define IMX8MM_CLK_GPU2D_ROOT 217 +#define IMX8MM_CLK_MU_ROOT 218 +#define IMX8MM_CLK_CSI1_ROOT 219 + +#define IMX8MM_CLK_DRAM_CORE 220 +#define IMX8MM_CLK_DRAM_ALT_ROOT 221 + +#define IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK 222 + +#define IMX8MM_CLK_END 223 + +#endif diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h index 04f7ac345984..6677e920dc2d 100644 --- a/include/dt-bindings/clock/imx8mq-clock.h +++ b/include/dt-bindings/clock/imx8mq-clock.h @@ -245,151 +245,160 @@ /* USB_CORE_REF */ #define IMX8MQ_CLK_USB_CORE_REF 152 /* USB_PHY_REF */ -#define IMX8MQ_CLK_USB_PHY_REF 163 +#define IMX8MQ_CLK_USB_PHY_REF 153 /* ECSPI1 */ -#define IMX8MQ_CLK_ECSPI1 164 +#define IMX8MQ_CLK_ECSPI1 154 /* ECSPI2 */ -#define IMX8MQ_CLK_ECSPI2 165 +#define IMX8MQ_CLK_ECSPI2 155 /* PWM1 */ -#define IMX8MQ_CLK_PWM1 166 +#define IMX8MQ_CLK_PWM1 156 /* PWM2 */ -#define IMX8MQ_CLK_PWM2 167 +#define IMX8MQ_CLK_PWM2 157 /* PWM3 */ -#define IMX8MQ_CLK_PWM3 168 +#define IMX8MQ_CLK_PWM3 158 /* PWM4 */ -#define IMX8MQ_CLK_PWM4 169 +#define IMX8MQ_CLK_PWM4 159 /* GPT1 */ -#define IMX8MQ_CLK_GPT1 170 +#define IMX8MQ_CLK_GPT1 160 /* WDOG */ -#define IMX8MQ_CLK_WDOG 171 +#define IMX8MQ_CLK_WDOG 161 /* WRCLK */ -#define IMX8MQ_CLK_WRCLK 172 +#define IMX8MQ_CLK_WRCLK 162 /* DSI_CORE */ -#define IMX8MQ_CLK_DSI_CORE 173 +#define IMX8MQ_CLK_DSI_CORE 163 /* DSI_PHY */ -#define IMX8MQ_CLK_DSI_PHY_REF 174 +#define IMX8MQ_CLK_DSI_PHY_REF 164 /* DSI_DBI */ -#define IMX8MQ_CLK_DSI_DBI 175 +#define IMX8MQ_CLK_DSI_DBI 165 /*DSI_ESC */ -#define IMX8MQ_CLK_DSI_ESC 176 +#define IMX8MQ_CLK_DSI_ESC 166 /* CSI1_CORE */ -#define IMX8MQ_CLK_CSI1_CORE 177 +#define IMX8MQ_CLK_CSI1_CORE 167 /* CSI1_PHY */ -#define IMX8MQ_CLK_CSI1_PHY_REF 178 +#define IMX8MQ_CLK_CSI1_PHY_REF 168 /* CSI_ESC */ -#define IMX8MQ_CLK_CSI1_ESC 179 +#define IMX8MQ_CLK_CSI1_ESC 169 /* CSI2_CORE */ #define IMX8MQ_CLK_CSI2_CORE 170 /* CSI2_PHY */ -#define IMX8MQ_CLK_CSI2_PHY_REF 181 +#define IMX8MQ_CLK_CSI2_PHY_REF 171 /* CSI2_ESC */ -#define IMX8MQ_CLK_CSI2_ESC 182 +#define IMX8MQ_CLK_CSI2_ESC 172 /* PCIE2_CTRL */ -#define IMX8MQ_CLK_PCIE2_CTRL 183 +#define IMX8MQ_CLK_PCIE2_CTRL 173 /* PCIE2_PHY */ -#define IMX8MQ_CLK_PCIE2_PHY 184 +#define IMX8MQ_CLK_PCIE2_PHY 174 /* PCIE2_AUX */ -#define IMX8MQ_CLK_PCIE2_AUX 185 +#define IMX8MQ_CLK_PCIE2_AUX 175 /* ECSPI3 */ -#define IMX8MQ_CLK_ECSPI3 186 +#define IMX8MQ_CLK_ECSPI3 176 /* CCGR clocks */ -#define IMX8MQ_CLK_A53_ROOT 187 -#define IMX8MQ_CLK_DRAM_ROOT 188 -#define IMX8MQ_CLK_ECSPI1_ROOT 189 +#define IMX8MQ_CLK_A53_ROOT 177 +#define IMX8MQ_CLK_DRAM_ROOT 178 +#define IMX8MQ_CLK_ECSPI1_ROOT 179 #define IMX8MQ_CLK_ECSPI2_ROOT 180 #define IMX8MQ_CLK_ECSPI3_ROOT 181 #define IMX8MQ_CLK_ENET1_ROOT 182 -#define IMX8MQ_CLK_GPT1_ROOT 193 -#define IMX8MQ_CLK_I2C1_ROOT 194 -#define IMX8MQ_CLK_I2C2_ROOT 195 -#define IMX8MQ_CLK_I2C3_ROOT 196 -#define IMX8MQ_CLK_I2C4_ROOT 197 -#define IMX8MQ_CLK_M4_ROOT 198 -#define IMX8MQ_CLK_PCIE1_ROOT 199 -#define IMX8MQ_CLK_PCIE2_ROOT 200 -#define IMX8MQ_CLK_PWM1_ROOT 201 -#define IMX8MQ_CLK_PWM2_ROOT 202 -#define IMX8MQ_CLK_PWM3_ROOT 203 -#define IMX8MQ_CLK_PWM4_ROOT 204 -#define IMX8MQ_CLK_QSPI_ROOT 205 -#define IMX8MQ_CLK_SAI1_ROOT 206 -#define IMX8MQ_CLK_SAI2_ROOT 207 -#define IMX8MQ_CLK_SAI3_ROOT 208 -#define IMX8MQ_CLK_SAI4_ROOT 209 -#define IMX8MQ_CLK_SAI5_ROOT 210 -#define IMX8MQ_CLK_SAI6_ROOT 212 -#define IMX8MQ_CLK_UART1_ROOT 213 -#define IMX8MQ_CLK_UART2_ROOT 214 -#define IMX8MQ_CLK_UART3_ROOT 215 -#define IMX8MQ_CLK_UART4_ROOT 216 -#define IMX8MQ_CLK_USB1_CTRL_ROOT 217 -#define IMX8MQ_CLK_USB2_CTRL_ROOT 218 -#define IMX8MQ_CLK_USB1_PHY_ROOT 219 -#define IMX8MQ_CLK_USB2_PHY_ROOT 220 -#define IMX8MQ_CLK_USDHC1_ROOT 221 -#define IMX8MQ_CLK_USDHC2_ROOT 222 -#define IMX8MQ_CLK_WDOG1_ROOT 223 -#define IMX8MQ_CLK_WDOG2_ROOT 224 -#define IMX8MQ_CLK_WDOG3_ROOT 225 -#define IMX8MQ_CLK_GPU_ROOT 226 -#define IMX8MQ_CLK_HEVC_ROOT 227 -#define IMX8MQ_CLK_AVC_ROOT 228 -#define IMX8MQ_CLK_VP9_ROOT 229 -#define IMX8MQ_CLK_HEVC_INTER_ROOT 230 -#define IMX8MQ_CLK_DISP_ROOT 231 -#define IMX8MQ_CLK_HDMI_ROOT 232 -#define IMX8MQ_CLK_HDMI_PHY_ROOT 233 -#define IMX8MQ_CLK_VPU_DEC_ROOT 234 -#define IMX8MQ_CLK_CSI1_ROOT 235 -#define IMX8MQ_CLK_CSI2_ROOT 236 -#define IMX8MQ_CLK_RAWNAND_ROOT 237 -#define IMX8MQ_CLK_SDMA1_ROOT 238 -#define IMX8MQ_CLK_SDMA2_ROOT 239 -#define IMX8MQ_CLK_VPU_G1_ROOT 240 -#define IMX8MQ_CLK_VPU_G2_ROOT 241 +#define IMX8MQ_CLK_GPT1_ROOT 183 +#define IMX8MQ_CLK_I2C1_ROOT 184 +#define IMX8MQ_CLK_I2C2_ROOT 185 +#define IMX8MQ_CLK_I2C3_ROOT 186 +#define IMX8MQ_CLK_I2C4_ROOT 187 +#define IMX8MQ_CLK_M4_ROOT 188 +#define IMX8MQ_CLK_PCIE1_ROOT 189 +#define IMX8MQ_CLK_PCIE2_ROOT 190 +#define IMX8MQ_CLK_PWM1_ROOT 191 +#define IMX8MQ_CLK_PWM2_ROOT 192 +#define IMX8MQ_CLK_PWM3_ROOT 193 +#define IMX8MQ_CLK_PWM4_ROOT 194 +#define IMX8MQ_CLK_QSPI_ROOT 195 +#define IMX8MQ_CLK_SAI1_ROOT 196 +#define IMX8MQ_CLK_SAI2_ROOT 197 +#define IMX8MQ_CLK_SAI3_ROOT 198 +#define IMX8MQ_CLK_SAI4_ROOT 199 +#define IMX8MQ_CLK_SAI5_ROOT 200 +#define IMX8MQ_CLK_SAI6_ROOT 201 +#define IMX8MQ_CLK_UART1_ROOT 202 +#define IMX8MQ_CLK_UART2_ROOT 203 +#define IMX8MQ_CLK_UART3_ROOT 204 +#define IMX8MQ_CLK_UART4_ROOT 205 +#define IMX8MQ_CLK_USB1_CTRL_ROOT 206 +#define IMX8MQ_CLK_USB2_CTRL_ROOT 207 +#define IMX8MQ_CLK_USB1_PHY_ROOT 208 +#define IMX8MQ_CLK_USB2_PHY_ROOT 209 +#define IMX8MQ_CLK_USDHC1_ROOT 210 +#define IMX8MQ_CLK_USDHC2_ROOT 211 +#define IMX8MQ_CLK_WDOG1_ROOT 212 +#define IMX8MQ_CLK_WDOG2_ROOT 213 +#define IMX8MQ_CLK_WDOG3_ROOT 214 +#define IMX8MQ_CLK_GPU_ROOT 215 +#define IMX8MQ_CLK_HEVC_ROOT 216 +#define IMX8MQ_CLK_AVC_ROOT 217 +#define IMX8MQ_CLK_VP9_ROOT 218 +#define IMX8MQ_CLK_HEVC_INTER_ROOT 219 +#define IMX8MQ_CLK_DISP_ROOT 220 +#define IMX8MQ_CLK_HDMI_ROOT 221 +#define IMX8MQ_CLK_HDMI_PHY_ROOT 222 +#define IMX8MQ_CLK_VPU_DEC_ROOT 223 +#define IMX8MQ_CLK_CSI1_ROOT 224 +#define IMX8MQ_CLK_CSI2_ROOT 225 +#define IMX8MQ_CLK_RAWNAND_ROOT 226 +#define IMX8MQ_CLK_SDMA1_ROOT 227 +#define IMX8MQ_CLK_SDMA2_ROOT 228 +#define IMX8MQ_CLK_VPU_G1_ROOT 229 +#define IMX8MQ_CLK_VPU_G2_ROOT 230 /* SCCG PLL GATE */ -#define IMX8MQ_SYS1_PLL_OUT 242 -#define IMX8MQ_SYS2_PLL_OUT 243 -#define IMX8MQ_SYS3_PLL_OUT 244 -#define IMX8MQ_DRAM_PLL_OUT 245 +#define IMX8MQ_SYS1_PLL_OUT 231 +#define IMX8MQ_SYS2_PLL_OUT 232 +#define IMX8MQ_SYS3_PLL_OUT 233 +#define IMX8MQ_DRAM_PLL_OUT 234 -#define IMX8MQ_GPT_3M_CLK 246 +#define IMX8MQ_GPT_3M_CLK 235 -#define IMX8MQ_CLK_IPG_ROOT 247 -#define IMX8MQ_CLK_IPG_AUDIO_ROOT 248 -#define IMX8MQ_CLK_SAI1_IPG 249 -#define IMX8MQ_CLK_SAI2_IPG 250 -#define IMX8MQ_CLK_SAI3_IPG 251 -#define IMX8MQ_CLK_SAI4_IPG 252 -#define IMX8MQ_CLK_SAI5_IPG 253 -#define IMX8MQ_CLK_SAI6_IPG 254 +#define IMX8MQ_CLK_IPG_ROOT 236 +#define IMX8MQ_CLK_IPG_AUDIO_ROOT 237 +#define IMX8MQ_CLK_SAI1_IPG 238 +#define IMX8MQ_CLK_SAI2_IPG 239 +#define IMX8MQ_CLK_SAI3_IPG 240 +#define IMX8MQ_CLK_SAI4_IPG 241 +#define IMX8MQ_CLK_SAI5_IPG 242 +#define IMX8MQ_CLK_SAI6_IPG 243 /* DSI AHB/IPG clocks */ /* rxesc clock */ -#define IMX8MQ_CLK_DSI_AHB 255 +#define IMX8MQ_CLK_DSI_AHB 244 /* txesc clock */ -#define IMX8MQ_CLK_DSI_IPG_DIV 256 +#define IMX8MQ_CLK_DSI_IPG_DIV 245 -#define IMX8MQ_CLK_TMU_ROOT 257 +#define IMX8MQ_CLK_TMU_ROOT 246 /* Display root clocks */ -#define IMX8MQ_CLK_DISP_AXI_ROOT 258 -#define IMX8MQ_CLK_DISP_APB_ROOT 259 -#define IMX8MQ_CLK_DISP_RTRM_ROOT 260 +#define IMX8MQ_CLK_DISP_AXI_ROOT 247 +#define IMX8MQ_CLK_DISP_APB_ROOT 248 +#define IMX8MQ_CLK_DISP_RTRM_ROOT 249 -#define IMX8MQ_CLK_OCOTP_ROOT 261 +#define IMX8MQ_CLK_OCOTP_ROOT 250 -#define IMX8MQ_CLK_DRAM_ALT_ROOT 262 -#define IMX8MQ_CLK_DRAM_CORE 263 +#define IMX8MQ_CLK_DRAM_ALT_ROOT 251 +#define IMX8MQ_CLK_DRAM_CORE 252 -#define IMX8MQ_CLK_MU_ROOT 264 -#define IMX8MQ_VIDEO2_PLL_OUT 265 +#define IMX8MQ_CLK_MU_ROOT 253 +#define IMX8MQ_VIDEO2_PLL_OUT 254 -#define IMX8MQ_CLK_CLKO2 266 +#define IMX8MQ_CLK_CLKO2 255 -#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 267 +#define IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK 256 -#define IMX8MQ_CLK_END 268 +#define IMX8MQ_CLK_CLKO1 257 +#define IMX8MQ_CLK_ARM 258 + +#define IMX8MQ_CLK_GPIO1_ROOT 259 +#define IMX8MQ_CLK_GPIO2_ROOT 260 +#define IMX8MQ_CLK_GPIO3_ROOT 261 +#define IMX8MQ_CLK_GPIO4_ROOT 262 +#define IMX8MQ_CLK_GPIO5_ROOT 263 + +#define IMX8MQ_CLK_END 264 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */ diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h index 228a5e234af0..e785c6eb3561 100644 --- a/include/dt-bindings/clock/marvell,mmp2.h +++ b/include/dt-bindings/clock/marvell,mmp2.h @@ -71,6 +71,7 @@ #define MMP2_CLK_CCIC1_MIX 117 #define MMP2_CLK_CCIC1_PHY 118 #define MMP2_CLK_CCIC1_SPHY 119 +#define MMP2_CLK_DISP0_LCDC 120 #define MMP2_NR_CLKS 200 #endif diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h index 5fe2923382d0..8067077a62ca 100644 --- a/include/dt-bindings/clock/meson8b-clkc.h +++ b/include/dt-bindings/clock/meson8b-clkc.h @@ -104,6 +104,7 @@ #define CLKID_MPLL2 95 #define CLKID_NAND_CLK 112 #define CLKID_ABP 124 +#define CLKID_APB 124 #define CLKID_PERIPH 126 #define CLKID_AXI 128 #define CLKID_L2_DRAM 130 diff --git a/include/dt-bindings/clock/mt2712-clk.h b/include/dt-bindings/clock/mt2712-clk.h index 76265836a1e1..c3b29dff9c0e 100644 --- a/include/dt-bindings/clock/mt2712-clk.h +++ b/include/dt-bindings/clock/mt2712-clk.h @@ -228,7 +228,8 @@ #define CLK_TOP_NFI2X_EN 189 #define CLK_TOP_NFIECC_EN 190 #define CLK_TOP_NFI1X_CK_EN 191 -#define CLK_TOP_NR_CLK 192 +#define CLK_TOP_APLL2_D3 192 +#define CLK_TOP_NR_CLK 193 /* INFRACFG */ diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h index 8aea623dd518..76e4e5b65353 100644 --- a/include/dt-bindings/clock/mt8173-clk.h +++ b/include/dt-bindings/clock/mt8173-clk.h @@ -194,7 +194,8 @@ #define CLK_INFRA_PMICWRAP 11 #define CLK_INFRA_CLK_13M 12 #define CLK_INFRA_CA53SEL 13 -#define CLK_INFRA_CA57SEL 14 +#define CLK_INFRA_CA57SEL 14 /* Deprecated. Don't use it. */ +#define CLK_INFRA_CA72SEL 14 #define CLK_INFRA_NR_CLK 15 /* PERI_SYS */ diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h index 3658b0c14966..ede93a0ca156 100644 --- a/include/dt-bindings/clock/qcom,rpmcc.h +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -127,5 +127,15 @@ #define RPM_SMD_BIMC_GPU_A_CLK 77 #define RPM_SMD_QPIC_CLK 78 #define RPM_SMD_QPIC_CLK_A 79 +#define RPM_SMD_LN_BB_CLK1 80 +#define RPM_SMD_LN_BB_CLK1_A 81 +#define RPM_SMD_LN_BB_CLK2 82 +#define RPM_SMD_LN_BB_CLK2_A 83 +#define RPM_SMD_LN_BB_CLK3_PIN 84 +#define RPM_SMD_LN_BB_CLK3_A_PIN 85 +#define RPM_SMD_RF_CLK3 86 +#define RPM_SMD_RF_CLK3_A 87 +#define RPM_SMD_RF_CLK3_PIN 88 +#define RPM_SMD_RF_CLK3_A_PIN 89 #endif diff --git a/include/dt-bindings/clock/qcom,rpmh.h b/include/dt-bindings/clock/qcom,rpmh.h index f48fbd6f2095..edcab3f7b7d3 100644 --- a/include/dt-bindings/clock/qcom,rpmh.h +++ b/include/dt-bindings/clock/qcom,rpmh.h @@ -18,5 +18,6 @@ #define RPMH_RF_CLK2_A 9 #define RPMH_RF_CLK3 10 #define RPMH_RF_CLK3_A 11 +#define RPMH_IPA_CLK 12 #endif diff --git a/include/dt-bindings/clock/r8a774a1-cpg-mssr.h b/include/dt-bindings/clock/r8a774a1-cpg-mssr.h index 9bc5d45ff4b5..e355363f40c2 100644 --- a/include/dt-bindings/clock/r8a774a1-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a774a1-cpg-mssr.h @@ -54,5 +54,6 @@ #define R8A774A1_CLK_CPEX 43 #define R8A774A1_CLK_R 44 #define R8A774A1_CLK_OSC 45 +#define R8A774A1_CLK_CANFD 46 #endif /* __DT_BINDINGS_CLOCK_R8A774A1_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/r8a774c0-cpg-mssr.h b/include/dt-bindings/clock/r8a774c0-cpg-mssr.h index 8fe51b6aca28..8ad9cd6be8e9 100644 --- a/include/dt-bindings/clock/r8a774c0-cpg-mssr.h +++ b/include/dt-bindings/clock/r8a774c0-cpg-mssr.h @@ -56,5 +56,6 @@ #define R8A774C0_CLK_CSI0 45 #define R8A774C0_CLK_CP 46 #define R8A774C0_CLK_CPEX 47 +#define R8A774C0_CLK_CANFD 48 #endif /* __DT_BINDINGS_CLOCK_R8A774C0_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/r8a7778-clock.h b/include/dt-bindings/clock/r8a7778-clock.h index f6b07c5399de..d0bff9ec5c66 100644 --- a/include/dt-bindings/clock/r8a7778-clock.h +++ b/include/dt-bindings/clock/r8a7778-clock.h @@ -30,6 +30,8 @@ #define R8A7778_CLK_SCIF3 23 #define R8A7778_CLK_SCIF4 22 #define R8A7778_CLK_SCIF5 21 +#define R8A7778_CLK_HSCIF0 19 +#define R8A7778_CLK_HSCIF1 18 #define R8A7778_CLK_TMU0 16 #define R8A7778_CLK_TMU1 15 #define R8A7778_CLK_TMU2 14 diff --git a/include/dt-bindings/clock/sifive-fu540-prci.h b/include/dt-bindings/clock/sifive-fu540-prci.h new file mode 100644 index 000000000000..6a0b70a37d78 --- /dev/null +++ b/include/dt-bindings/clock/sifive-fu540-prci.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018-2019 SiFive, Inc. + * Wesley Terpstra + * Paul Walmsley + */ + +#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU540_PRCI_H +#define __DT_BINDINGS_CLOCK_SIFIVE_FU540_PRCI_H + +/* Clock indexes for use by Device Tree data and the PRCI driver */ + +#define PRCI_CLK_COREPLL 0 +#define PRCI_CLK_DDRPLL 1 +#define PRCI_CLK_GEMGXLPLL 2 +#define PRCI_CLK_TLCLK 3 + +#endif diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h index 90ec780bfc68..4cdaf135829c 100644 --- a/include/dt-bindings/clock/stm32mp1-clks.h +++ b/include/dt-bindings/clock/stm32mp1-clks.h @@ -248,7 +248,4 @@ #define STM32MP1_LAST_CLK 232 -#define LTDC_K LTDC_PX -#define ETHMAC_K ETHCK_K - #endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */ diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h index 2cc10ae4bbb7..c029467e828b 100644 --- a/include/dt-bindings/gpio/gpio.h +++ b/include/dt-bindings/gpio/gpio.h @@ -33,4 +33,10 @@ #define GPIO_PERSISTENT 0 #define GPIO_TRANSITORY 8 +/* Bit 4 express pull up */ +#define GPIO_PULL_UP 16 + +/* Bit 5 express pull down */ +#define GPIO_PULL_DOWN 32 + #endif diff --git a/include/dt-bindings/iio/adc/ingenic,adc.h b/include/dt-bindings/iio/adc/ingenic,adc.h new file mode 100644 index 000000000000..82706b2706ac --- /dev/null +++ b/include/dt-bindings/iio/adc/ingenic,adc.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H +#define _DT_BINDINGS_IIO_ADC_INGENIC_ADC_H + +/* ADC channel idx. */ +#define INGENIC_ADC_AUX 0 +#define INGENIC_ADC_BATTERY 1 + +#endif diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h index 7f14d4a66c28..64cee116928e 100644 --- a/include/dt-bindings/input/linux-event-codes.h +++ b/include/dt-bindings/input/linux-event-codes.h @@ -439,10 +439,12 @@ #define KEY_TITLE 0x171 #define KEY_SUBTITLE 0x172 #define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 +#define KEY_FULL_SCREEN 0x174 /* AC View Toggle */ +#define KEY_ZOOM KEY_FULL_SCREEN #define KEY_MODE 0x175 #define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 +#define KEY_ASPECT_RATIO 0x177 /* HUTRR37: Aspect */ +#define KEY_SCREEN KEY_ASPECT_RATIO #define KEY_PC 0x178 /* Media Select Computer */ #define KEY_TV 0x179 /* Media Select TV */ #define KEY_TV2 0x17a /* Media Select Cable */ diff --git a/include/dt-bindings/interconnect/qcom,sdm845.h b/include/dt-bindings/interconnect/qcom,sdm845.h new file mode 100644 index 000000000000..7b2393be7361 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,sdm845.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Qualcomm SDM845 interconnect IDs + * + * Copyright (c) 2018, Linaro Ltd. + * Author: Georgi Djakov + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SDM845_H + +#define MASTER_A1NOC_CFG 0 +#define MASTER_BLSP_1 1 +#define MASTER_TSIF 2 +#define MASTER_SDCC_2 3 +#define MASTER_SDCC_4 4 +#define MASTER_UFS_CARD 5 +#define MASTER_UFS_MEM 6 +#define MASTER_PCIE_0 7 +#define MASTER_A2NOC_CFG 8 +#define MASTER_QDSS_BAM 9 +#define MASTER_BLSP_2 10 +#define MASTER_CNOC_A2NOC 11 +#define MASTER_CRYPTO 12 +#define MASTER_IPA 13 +#define MASTER_PCIE_1 14 +#define MASTER_QDSS_ETR 15 +#define MASTER_USB3_0 16 +#define MASTER_USB3_1 17 +#define MASTER_CAMNOC_HF0_UNCOMP 18 +#define MASTER_CAMNOC_HF1_UNCOMP 19 +#define MASTER_CAMNOC_SF_UNCOMP 20 +#define MASTER_SPDM 21 +#define MASTER_TIC 22 +#define MASTER_SNOC_CNOC 23 +#define MASTER_QDSS_DAP 24 +#define MASTER_CNOC_DC_NOC 25 +#define MASTER_APPSS_PROC 26 +#define MASTER_GNOC_CFG 27 +#define MASTER_LLCC 28 +#define MASTER_TCU_0 29 +#define MASTER_MEM_NOC_CFG 30 +#define MASTER_GNOC_MEM_NOC 31 +#define MASTER_MNOC_HF_MEM_NOC 32 +#define MASTER_MNOC_SF_MEM_NOC 33 +#define MASTER_SNOC_GC_MEM_NOC 34 +#define MASTER_SNOC_SF_MEM_NOC 35 +#define MASTER_GFX3D 36 +#define MASTER_CNOC_MNOC_CFG 37 +#define MASTER_CAMNOC_HF0 38 +#define MASTER_CAMNOC_HF1 39 +#define MASTER_CAMNOC_SF 40 +#define MASTER_MDP0 41 +#define MASTER_MDP1 42 +#define MASTER_ROTATOR 43 +#define MASTER_VIDEO_P0 44 +#define MASTER_VIDEO_P1 45 +#define MASTER_VIDEO_PROC 46 +#define MASTER_SNOC_CFG 47 +#define MASTER_A1NOC_SNOC 48 +#define MASTER_A2NOC_SNOC 49 +#define MASTER_GNOC_SNOC 50 +#define MASTER_MEM_NOC_SNOC 51 +#define MASTER_ANOC_PCIE_SNOC 52 +#define MASTER_PIMEM 53 +#define MASTER_GIC 54 +#define SLAVE_A1NOC_SNOC 55 +#define SLAVE_SERVICE_A1NOC 56 +#define SLAVE_ANOC_PCIE_A1NOC_SNOC 57 +#define SLAVE_A2NOC_SNOC 58 +#define SLAVE_ANOC_PCIE_SNOC 59 +#define SLAVE_SERVICE_A2NOC 60 +#define SLAVE_CAMNOC_UNCOMP 61 +#define SLAVE_A1NOC_CFG 62 +#define SLAVE_A2NOC_CFG 63 +#define SLAVE_AOP 64 +#define SLAVE_AOSS 65 +#define SLAVE_CAMERA_CFG 66 +#define SLAVE_CLK_CTL 67 +#define SLAVE_CDSP_CFG 68 +#define SLAVE_RBCPR_CX_CFG 69 +#define SLAVE_CRYPTO_0_CFG 70 +#define SLAVE_DCC_CFG 71 +#define SLAVE_CNOC_DDRSS 72 +#define SLAVE_DISPLAY_CFG 73 +#define SLAVE_GLM 74 +#define SLAVE_GFX3D_CFG 75 +#define SLAVE_IMEM_CFG 76 +#define SLAVE_IPA_CFG 77 +#define SLAVE_CNOC_MNOC_CFG 78 +#define SLAVE_PCIE_0_CFG 79 +#define SLAVE_PCIE_1_CFG 80 +#define SLAVE_PDM 81 +#define SLAVE_SOUTH_PHY_CFG 82 +#define SLAVE_PIMEM_CFG 83 +#define SLAVE_PRNG 84 +#define SLAVE_QDSS_CFG 85 +#define SLAVE_BLSP_2 86 +#define SLAVE_BLSP_1 87 +#define SLAVE_SDCC_2 88 +#define SLAVE_SDCC_4 89 +#define SLAVE_SNOC_CFG 90 +#define SLAVE_SPDM_WRAPPER 91 +#define SLAVE_SPSS_CFG 92 +#define SLAVE_TCSR 93 +#define SLAVE_TLMM_NORTH 94 +#define SLAVE_TLMM_SOUTH 95 +#define SLAVE_TSIF 96 +#define SLAVE_UFS_CARD_CFG 97 +#define SLAVE_UFS_MEM_CFG 98 +#define SLAVE_USB3_0 99 +#define SLAVE_USB3_1 100 +#define SLAVE_VENUS_CFG 101 +#define SLAVE_VSENSE_CTRL_CFG 102 +#define SLAVE_CNOC_A2NOC 103 +#define SLAVE_SERVICE_CNOC 104 +#define SLAVE_LLCC_CFG 105 +#define SLAVE_MEM_NOC_CFG 106 +#define SLAVE_GNOC_SNOC 107 +#define SLAVE_GNOC_MEM_NOC 108 +#define SLAVE_SERVICE_GNOC 109 +#define SLAVE_EBI1 110 +#define SLAVE_MSS_PROC_MS_MPU_CFG 111 +#define SLAVE_MEM_NOC_GNOC 112 +#define SLAVE_LLCC 113 +#define SLAVE_MEM_NOC_SNOC 114 +#define SLAVE_SERVICE_MEM_NOC 115 +#define SLAVE_MNOC_SF_MEM_NOC 116 +#define SLAVE_MNOC_HF_MEM_NOC 117 +#define SLAVE_SERVICE_MNOC 118 +#define SLAVE_APPSS 119 +#define SLAVE_SNOC_CNOC 120 +#define SLAVE_SNOC_MEM_NOC_GC 121 +#define SLAVE_SNOC_MEM_NOC_SF 122 +#define SLAVE_IMEM 123 +#define SLAVE_PCIE_0 124 +#define SLAVE_PCIE_1 125 +#define SLAVE_PIMEM 126 +#define SLAVE_SERVICE_SNOC 127 +#define SLAVE_QDSS_STM 128 +#define SLAVE_TCU 129 + +#endif diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h new file mode 100644 index 000000000000..321cd08797d9 --- /dev/null +++ b/include/dt-bindings/mfd/st,stpmic1.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard , + * Pascal Paillet for STMicroelectronics. + */ + +#ifndef __DT_BINDINGS_STPMIC1_H__ +#define __DT_BINDINGS_STPMIC1_H__ + +/* IRQ definitions */ +#define IT_PONKEY_F 0 +#define IT_PONKEY_R 1 +#define IT_WAKEUP_F 2 +#define IT_WAKEUP_R 3 +#define IT_VBUS_OTG_F 4 +#define IT_VBUS_OTG_R 5 +#define IT_SWOUT_F 6 +#define IT_SWOUT_R 7 + +#define IT_CURLIM_BUCK1 8 +#define IT_CURLIM_BUCK2 9 +#define IT_CURLIM_BUCK3 10 +#define IT_CURLIM_BUCK4 11 +#define IT_OCP_OTG 12 +#define IT_OCP_SWOUT 13 +#define IT_OCP_BOOST 14 +#define IT_OVP_BOOST 15 + +#define IT_CURLIM_LDO1 16 +#define IT_CURLIM_LDO2 17 +#define IT_CURLIM_LDO3 18 +#define IT_CURLIM_LDO4 19 +#define IT_CURLIM_LDO5 20 +#define IT_CURLIM_LDO6 21 +#define IT_SHORT_SWOTG 22 +#define IT_SHORT_SWOUT 23 + +#define IT_TWARN_F 24 +#define IT_TWARN_R 25 +#define IT_VINLOW_F 26 +#define IT_VINLOW_R 27 +#define IT_SWIN_F 30 +#define IT_SWIN_R 31 + +/* BUCK MODES definitions */ +#define STPMIC1_BUCK_MODE_NORMAL 0 +#define STPMIC1_BUCK_MODE_LP 2 + +#endif /* __DT_BINDINGS_STPMIC1_H__ */ diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index eb81867eac77..8dc10e00c627 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -17,6 +17,7 @@ #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) #define AT91_PINCTRL_OUTPUT (1 << 7) #define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) +#define AT91_PINCTRL_SLEWRATE (1 << 9) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) @@ -27,6 +28,9 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) +#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 diff --git a/include/dt-bindings/pinctrl/lochnagar.h b/include/dt-bindings/pinctrl/lochnagar.h new file mode 100644 index 000000000000..644760bf5725 --- /dev/null +++ b/include/dt-bindings/pinctrl/lochnagar.h @@ -0,0 +1,132 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Device Tree defines for Lochnagar pinctrl + * + * Copyright (c) 2018 Cirrus Logic, Inc. and + * Cirrus Logic International Semiconductor Ltd. + * + * Author: Charles Keepax + */ + +#ifndef DT_BINDINGS_PINCTRL_LOCHNAGAR_H +#define DT_BINDINGS_PINCTRL_LOCHNAGAR_H + +#define LOCHNAGAR1_PIN_CDC_RESET 0 +#define LOCHNAGAR1_PIN_DSP_RESET 1 +#define LOCHNAGAR1_PIN_CDC_CIF1MODE 2 +#define LOCHNAGAR1_PIN_NUM_GPIOS 3 + +#define LOCHNAGAR2_PIN_CDC_RESET 0 +#define LOCHNAGAR2_PIN_DSP_RESET 1 +#define LOCHNAGAR2_PIN_CDC_CIF1MODE 2 +#define LOCHNAGAR2_PIN_CDC_LDOENA 3 +#define LOCHNAGAR2_PIN_SPDIF_HWMODE 4 +#define LOCHNAGAR2_PIN_SPDIF_RESET 5 +#define LOCHNAGAR2_PIN_FPGA_GPIO1 6 +#define LOCHNAGAR2_PIN_FPGA_GPIO2 7 +#define LOCHNAGAR2_PIN_FPGA_GPIO3 8 +#define LOCHNAGAR2_PIN_FPGA_GPIO4 9 +#define LOCHNAGAR2_PIN_FPGA_GPIO5 10 +#define LOCHNAGAR2_PIN_FPGA_GPIO6 11 +#define LOCHNAGAR2_PIN_CDC_GPIO1 12 +#define LOCHNAGAR2_PIN_CDC_GPIO2 13 +#define LOCHNAGAR2_PIN_CDC_GPIO3 14 +#define LOCHNAGAR2_PIN_CDC_GPIO4 15 +#define LOCHNAGAR2_PIN_CDC_GPIO5 16 +#define LOCHNAGAR2_PIN_CDC_GPIO6 17 +#define LOCHNAGAR2_PIN_CDC_GPIO7 18 +#define LOCHNAGAR2_PIN_CDC_GPIO8 19 +#define LOCHNAGAR2_PIN_DSP_GPIO1 20 +#define LOCHNAGAR2_PIN_DSP_GPIO2 21 +#define LOCHNAGAR2_PIN_DSP_GPIO3 22 +#define LOCHNAGAR2_PIN_DSP_GPIO4 23 +#define LOCHNAGAR2_PIN_DSP_GPIO5 24 +#define LOCHNAGAR2_PIN_DSP_GPIO6 25 +#define LOCHNAGAR2_PIN_GF_GPIO2 26 +#define LOCHNAGAR2_PIN_GF_GPIO3 27 +#define LOCHNAGAR2_PIN_GF_GPIO7 28 +#define LOCHNAGAR2_PIN_CDC_AIF1_BCLK 29 +#define LOCHNAGAR2_PIN_CDC_AIF1_RXDAT 30 +#define LOCHNAGAR2_PIN_CDC_AIF1_LRCLK 31 +#define LOCHNAGAR2_PIN_CDC_AIF1_TXDAT 32 +#define LOCHNAGAR2_PIN_CDC_AIF2_BCLK 33 +#define LOCHNAGAR2_PIN_CDC_AIF2_RXDAT 34 +#define LOCHNAGAR2_PIN_CDC_AIF2_LRCLK 35 +#define LOCHNAGAR2_PIN_CDC_AIF2_TXDAT 36 +#define LOCHNAGAR2_PIN_CDC_AIF3_BCLK 37 +#define LOCHNAGAR2_PIN_CDC_AIF3_RXDAT 38 +#define LOCHNAGAR2_PIN_CDC_AIF3_LRCLK 39 +#define LOCHNAGAR2_PIN_CDC_AIF3_TXDAT 40 +#define LOCHNAGAR2_PIN_DSP_AIF1_BCLK 41 +#define LOCHNAGAR2_PIN_DSP_AIF1_RXDAT 42 +#define LOCHNAGAR2_PIN_DSP_AIF1_LRCLK 43 +#define LOCHNAGAR2_PIN_DSP_AIF1_TXDAT 44 +#define LOCHNAGAR2_PIN_DSP_AIF2_BCLK 45 +#define LOCHNAGAR2_PIN_DSP_AIF2_RXDAT 46 +#define LOCHNAGAR2_PIN_DSP_AIF2_LRCLK 47 +#define LOCHNAGAR2_PIN_DSP_AIF2_TXDAT 48 +#define LOCHNAGAR2_PIN_PSIA1_BCLK 49 +#define LOCHNAGAR2_PIN_PSIA1_RXDAT 50 +#define LOCHNAGAR2_PIN_PSIA1_LRCLK 51 +#define LOCHNAGAR2_PIN_PSIA1_TXDAT 52 +#define LOCHNAGAR2_PIN_PSIA2_BCLK 53 +#define LOCHNAGAR2_PIN_PSIA2_RXDAT 54 +#define LOCHNAGAR2_PIN_PSIA2_LRCLK 55 +#define LOCHNAGAR2_PIN_PSIA2_TXDAT 56 +#define LOCHNAGAR2_PIN_GF_AIF3_BCLK 57 +#define LOCHNAGAR2_PIN_GF_AIF3_RXDAT 58 +#define LOCHNAGAR2_PIN_GF_AIF3_LRCLK 59 +#define LOCHNAGAR2_PIN_GF_AIF3_TXDAT 60 +#define LOCHNAGAR2_PIN_GF_AIF4_BCLK 61 +#define LOCHNAGAR2_PIN_GF_AIF4_RXDAT 62 +#define LOCHNAGAR2_PIN_GF_AIF4_LRCLK 63 +#define LOCHNAGAR2_PIN_GF_AIF4_TXDAT 64 +#define LOCHNAGAR2_PIN_GF_AIF1_BCLK 65 +#define LOCHNAGAR2_PIN_GF_AIF1_RXDAT 66 +#define LOCHNAGAR2_PIN_GF_AIF1_LRCLK 67 +#define LOCHNAGAR2_PIN_GF_AIF1_TXDAT 68 +#define LOCHNAGAR2_PIN_GF_AIF2_BCLK 69 +#define LOCHNAGAR2_PIN_GF_AIF2_RXDAT 70 +#define LOCHNAGAR2_PIN_GF_AIF2_LRCLK 71 +#define LOCHNAGAR2_PIN_GF_AIF2_TXDAT 72 +#define LOCHNAGAR2_PIN_DSP_UART1_RX 73 +#define LOCHNAGAR2_PIN_DSP_UART1_TX 74 +#define LOCHNAGAR2_PIN_DSP_UART2_RX 75 +#define LOCHNAGAR2_PIN_DSP_UART2_TX 76 +#define LOCHNAGAR2_PIN_GF_UART2_RX 77 +#define LOCHNAGAR2_PIN_GF_UART2_TX 78 +#define LOCHNAGAR2_PIN_USB_UART_RX 79 +#define LOCHNAGAR2_PIN_CDC_PDMCLK1 80 +#define LOCHNAGAR2_PIN_CDC_PDMDAT1 81 +#define LOCHNAGAR2_PIN_CDC_PDMCLK2 82 +#define LOCHNAGAR2_PIN_CDC_PDMDAT2 83 +#define LOCHNAGAR2_PIN_CDC_DMICCLK1 84 +#define LOCHNAGAR2_PIN_CDC_DMICDAT1 85 +#define LOCHNAGAR2_PIN_CDC_DMICCLK2 86 +#define LOCHNAGAR2_PIN_CDC_DMICDAT2 87 +#define LOCHNAGAR2_PIN_CDC_DMICCLK3 88 +#define LOCHNAGAR2_PIN_CDC_DMICDAT3 89 +#define LOCHNAGAR2_PIN_CDC_DMICCLK4 90 +#define LOCHNAGAR2_PIN_CDC_DMICDAT4 91 +#define LOCHNAGAR2_PIN_DSP_DMICCLK1 92 +#define LOCHNAGAR2_PIN_DSP_DMICDAT1 93 +#define LOCHNAGAR2_PIN_DSP_DMICCLK2 94 +#define LOCHNAGAR2_PIN_DSP_DMICDAT2 95 +#define LOCHNAGAR2_PIN_I2C2_SCL 96 +#define LOCHNAGAR2_PIN_I2C2_SDA 97 +#define LOCHNAGAR2_PIN_I2C3_SCL 98 +#define LOCHNAGAR2_PIN_I2C3_SDA 99 +#define LOCHNAGAR2_PIN_I2C4_SCL 100 +#define LOCHNAGAR2_PIN_I2C4_SDA 101 +#define LOCHNAGAR2_PIN_DSP_STANDBY 102 +#define LOCHNAGAR2_PIN_CDC_MCLK1 103 +#define LOCHNAGAR2_PIN_CDC_MCLK2 104 +#define LOCHNAGAR2_PIN_DSP_CLKIN 105 +#define LOCHNAGAR2_PIN_PSIA1_MCLK 106 +#define LOCHNAGAR2_PIN_PSIA2_MCLK 107 +#define LOCHNAGAR2_PIN_GF_GPIO1 108 +#define LOCHNAGAR2_PIN_GF_GPIO5 109 +#define LOCHNAGAR2_PIN_DSP_GPIO20 110 +#define LOCHNAGAR2_PIN_NUM_GPIOS 111 + +#endif diff --git a/include/dt-bindings/power/mt8173-power.h b/include/dt-bindings/power/mt8173-power.h index 15d531aa6e78..ef4a7f944848 100644 --- a/include/dt-bindings/power/mt8173-power.h +++ b/include/dt-bindings/power/mt8173-power.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H -#define _DT_BINDINGS_POWER_MT8183_POWER_H +#ifndef _DT_BINDINGS_POWER_MT8173_POWER_H +#define _DT_BINDINGS_POWER_MT8173_POWER_H #define MT8173_POWER_DOMAIN_VDEC 0 #define MT8173_POWER_DOMAIN_VENC 1 @@ -13,4 +13,4 @@ #define MT8173_POWER_DOMAIN_MFG_2D 8 #define MT8173_POWER_DOMAIN_MFG 9 -#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */ +#endif /* _DT_BINDINGS_POWER_MT8173_POWER_H */ diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h new file mode 100644 index 000000000000..87d9c6611682 --- /dev/null +++ b/include/dt-bindings/power/qcom-rpmpd.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */ + +#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H +#define _DT_BINDINGS_POWER_QCOM_RPMPD_H + +/* SDM845 Power Domain Indexes */ +#define SDM845_EBI 0 +#define SDM845_MX 1 +#define SDM845_MX_AO 2 +#define SDM845_CX 3 +#define SDM845_CX_AO 4 +#define SDM845_LMX 5 +#define SDM845_LCX 6 +#define SDM845_GFX 7 +#define SDM845_MSS 8 + +/* SDM845 Power Domain performance levels */ +#define RPMH_REGULATOR_LEVEL_RETENTION 16 +#define RPMH_REGULATOR_LEVEL_MIN_SVS 48 +#define RPMH_REGULATOR_LEVEL_LOW_SVS 64 +#define RPMH_REGULATOR_LEVEL_SVS 128 +#define RPMH_REGULATOR_LEVEL_SVS_L1 192 +#define RPMH_REGULATOR_LEVEL_NOM 256 +#define RPMH_REGULATOR_LEVEL_NOM_L1 320 +#define RPMH_REGULATOR_LEVEL_NOM_L2 336 +#define RPMH_REGULATOR_LEVEL_TURBO 384 +#define RPMH_REGULATOR_LEVEL_TURBO_L1 416 + +/* MSM8996 Power Domain Indexes */ +#define MSM8996_VDDCX 0 +#define MSM8996_VDDCX_AO 1 +#define MSM8996_VDDCX_VFC 2 +#define MSM8996_VDDMX 3 +#define MSM8996_VDDMX_AO 4 +#define MSM8996_VDDSSCX 5 +#define MSM8996_VDDSSCX_VFC 6 + +#endif diff --git a/include/dt-bindings/power/xlnx-zynqmp-power.h b/include/dt-bindings/power/xlnx-zynqmp-power.h new file mode 100644 index 000000000000..0d9a412fd5e0 --- /dev/null +++ b/include/dt-bindings/power/xlnx-zynqmp-power.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_POWER_H +#define _DT_BINDINGS_ZYNQMP_POWER_H + +#define PD_USB_0 22 +#define PD_USB_1 23 +#define PD_TTC_0 24 +#define PD_TTC_1 25 +#define PD_TTC_2 26 +#define PD_TTC_3 27 +#define PD_SATA 28 +#define PD_ETH_0 29 +#define PD_ETH_1 30 +#define PD_ETH_2 31 +#define PD_ETH_3 32 +#define PD_UART_0 33 +#define PD_UART_1 34 +#define PD_SPI_0 35 +#define PD_SPI_1 36 +#define PD_I2C_0 37 +#define PD_I2C_1 38 +#define PD_SD_0 39 +#define PD_SD_1 40 +#define PD_DP 41 +#define PD_GDMA 42 +#define PD_ADMA 43 +#define PD_NAND 44 +#define PD_QSPI 45 +#define PD_GPIO 46 +#define PD_CAN_0 47 +#define PD_CAN_1 48 +#define PD_GPU 58 +#define PD_PCIE 59 + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h new file mode 100644 index 000000000000..6d487c5eba2c --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h @@ -0,0 +1,137 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Jerome Brunet + * + */ + +#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS 2 +/* 3-4 */ +#define RESET_VIU 5 +#define RESET_AFIFO 6 +#define RESET_VID_PLL_DIV 7 +/* 8-9 */ +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_PCIE_CTRL_A 12 +#define RESET_VCBUS 13 +#define RESET_PCIE_PHY 14 +#define RESET_PCIE_APB 15 +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +/* 18 */ +#define RESET_HDMITX_CAPB3 19 +#define RESET_DVALIN_CAPB3 20 +#define RESET_DOS_CAPB3 21 +/* 22 */ +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +/* 27-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB 34 +#define RESET_DDR 35 +/* 36 */ +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +/* 41 */ +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +/* 47 */ +#define RESET_USB_PHY20 48 +#define RESET_USB_PHY21 49 +/* 50-60 */ +#define RESET_AUDIO_CODEC 61 +/* 62-63 */ +/* RESET2 */ +/* 64 */ +#define RESET_AUDIO 65 +#define RESET_HDMITX_PHY 66 +/* 67 */ +#define RESET_MIPI_DSI_HOST 68 +#define RESET_ALOCKER 69 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75-77 */ +#define RESET_DVALIN 78 +#define RESET_HDMITX 79 +/* 80-95 */ +/* RESET3 */ +/* 96-95 */ +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES_PL 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_0 109 +#define RESET_DEMUX_1 110 +#define RESET_DEMUX_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128-129 */ +#define RESET_MIPI_DSI_PHY 130 +/* 131-132 */ +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +/* 138-139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_M1 142 +#define RESET_I2C_M2 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_GEN 192 +#define RESET_SPICC0 193 +#define RESET_SC 194 +#define RESET_SANA_3 195 +#define RESET_I2C_M0 196 +#define RESET_TS_PLL 197 +#define RESET_SPICC1 198 +#define RESET_STREAM 199 +#define RESET_TS_CPU 200 +#define RESET_UART0 201 +#define RESET_UART1_2 202 +#define RESET_ASYNC0 203 +#define RESET_ASYNC1 204 +#define RESET_SPIFC0 205 +#define RESET_I2C_M3 206 +/* 207-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +#define RESET_TS_GPU 228 +#define RESET_DEVICE_MMC_ARB 229 +#define RESET_DVALIN_DMC_PIPL 230 +#define RESET_VID_LOCK 231 +#define RESET_NIC_DMC_PIPL 232 +#define RESET_DMC_VPU_PIPL 233 +#define RESET_GE2D_DMC_PIPL 234 +#define RESET_HCODEC_DMC_PIPL 235 +#define RESET_WAVE420_DMC_PIPL 236 +#define RESET_HEVCF_DMC_PIPL 237 +/* 238-255 */ + +#endif diff --git a/include/dt-bindings/reset/g12a-aoclkc.h b/include/dt-bindings/reset/g12a-aoclkc.h new file mode 100644 index 000000000000..bd2e2337135c --- /dev/null +++ b/include/dt-bindings/reset/g12a-aoclkc.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * Copyright (c) 2016 BayLibre, SAS + * Author: Neil Armstrong + */ + +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK +#define DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK + +#define RESET_AO_IR_IN 0 +#define RESET_AO_UART 1 +#define RESET_AO_I2C_M 2 +#define RESET_AO_I2C_S 3 +#define RESET_AO_SAR_ADC 4 +#define RESET_AO_UART2 5 +#define RESET_AO_IR_OUT 6 + +#endif diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h new file mode 100644 index 000000000000..57c592498aa0 --- /dev/null +++ b/include/dt-bindings/reset/imx8mq-reset.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + * + * Author: Andrey Smirnov + */ + +#ifndef DT_BINDING_RESET_IMX8MQ_H +#define DT_BINDING_RESET_IMX8MQ_H + +#define IMX8MQ_RESET_A53_CORE_POR_RESET0 0 +#define IMX8MQ_RESET_A53_CORE_POR_RESET1 1 +#define IMX8MQ_RESET_A53_CORE_POR_RESET2 2 +#define IMX8MQ_RESET_A53_CORE_POR_RESET3 3 +#define IMX8MQ_RESET_A53_CORE_RESET0 4 +#define IMX8MQ_RESET_A53_CORE_RESET1 5 +#define IMX8MQ_RESET_A53_CORE_RESET2 6 +#define IMX8MQ_RESET_A53_CORE_RESET3 7 +#define IMX8MQ_RESET_A53_DBG_RESET0 8 +#define IMX8MQ_RESET_A53_DBG_RESET1 9 +#define IMX8MQ_RESET_A53_DBG_RESET2 10 +#define IMX8MQ_RESET_A53_DBG_RESET3 11 +#define IMX8MQ_RESET_A53_ETM_RESET0 12 +#define IMX8MQ_RESET_A53_ETM_RESET1 13 +#define IMX8MQ_RESET_A53_ETM_RESET2 14 +#define IMX8MQ_RESET_A53_ETM_RESET3 15 +#define IMX8MQ_RESET_A53_SOC_DBG_RESET 16 +#define IMX8MQ_RESET_A53_L2RESET 17 +#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST 18 +#define IMX8MQ_RESET_OTG1_PHY_RESET 19 +#define IMX8MQ_RESET_OTG2_PHY_RESET 20 +#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21 +#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22 +#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23 +#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24 +#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25 +#define IMX8MQ_RESET_PCIEPHY 26 +#define IMX8MQ_RESET_PCIEPHY_PERST 27 +#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28 +#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29 +#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 +#define IMX8MQ_RESET_DISP_RESET 31 +#define IMX8MQ_RESET_GPU_RESET 32 +#define IMX8MQ_RESET_VPU_RESET 33 +#define IMX8MQ_RESET_PCIEPHY2 34 +#define IMX8MQ_RESET_PCIEPHY2_PERST 35 +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 +#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 +#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 +#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 +#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 +#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 +#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 +#define IMX8MQ_RESET_DDRC1_PRST 44 +#define IMX8MQ_RESET_DDRC1_CORE_RESET 45 +#define IMX8MQ_RESET_DDRC1_PHY_RESET 46 +#define IMX8MQ_RESET_DDRC2_PRST 47 +#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 +#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 + +#define IMX8MQ_RESET_NUM 50 + +#endif diff --git a/include/dt-bindings/reset/xlnx-zynqmp-resets.h b/include/dt-bindings/reset/xlnx-zynqmp-resets.h new file mode 100644 index 000000000000..d44525b9f8db --- /dev/null +++ b/include/dt-bindings/reset/xlnx-zynqmp-resets.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_ZYNQMP_RESETS_H +#define _DT_BINDINGS_ZYNQMP_RESETS_H + +#define ZYNQMP_RESET_PCIE_CFG 0 +#define ZYNQMP_RESET_PCIE_BRIDGE 1 +#define ZYNQMP_RESET_PCIE_CTRL 2 +#define ZYNQMP_RESET_DP 3 +#define ZYNQMP_RESET_SWDT_CRF 4 +#define ZYNQMP_RESET_AFI_FM5 5 +#define ZYNQMP_RESET_AFI_FM4 6 +#define ZYNQMP_RESET_AFI_FM3 7 +#define ZYNQMP_RESET_AFI_FM2 8 +#define ZYNQMP_RESET_AFI_FM1 9 +#define ZYNQMP_RESET_AFI_FM0 10 +#define ZYNQMP_RESET_GDMA 11 +#define ZYNQMP_RESET_GPU_PP1 12 +#define ZYNQMP_RESET_GPU_PP0 13 +#define ZYNQMP_RESET_GPU 14 +#define ZYNQMP_RESET_GT 15 +#define ZYNQMP_RESET_SATA 16 +#define ZYNQMP_RESET_ACPU3_PWRON 17 +#define ZYNQMP_RESET_ACPU2_PWRON 18 +#define ZYNQMP_RESET_ACPU1_PWRON 19 +#define ZYNQMP_RESET_ACPU0_PWRON 20 +#define ZYNQMP_RESET_APU_L2 21 +#define ZYNQMP_RESET_ACPU3 22 +#define ZYNQMP_RESET_ACPU2 23 +#define ZYNQMP_RESET_ACPU1 24 +#define ZYNQMP_RESET_ACPU0 25 +#define ZYNQMP_RESET_DDR 26 +#define ZYNQMP_RESET_APM_FPD 27 +#define ZYNQMP_RESET_SOFT 28 +#define ZYNQMP_RESET_GEM0 29 +#define ZYNQMP_RESET_GEM1 30 +#define ZYNQMP_RESET_GEM2 31 +#define ZYNQMP_RESET_GEM3 32 +#define ZYNQMP_RESET_QSPI 33 +#define ZYNQMP_RESET_UART0 34 +#define ZYNQMP_RESET_UART1 35 +#define ZYNQMP_RESET_SPI0 36 +#define ZYNQMP_RESET_SPI1 37 +#define ZYNQMP_RESET_SDIO0 38 +#define ZYNQMP_RESET_SDIO1 39 +#define ZYNQMP_RESET_CAN0 40 +#define ZYNQMP_RESET_CAN1 41 +#define ZYNQMP_RESET_I2C0 42 +#define ZYNQMP_RESET_I2C1 43 +#define ZYNQMP_RESET_TTC0 44 +#define ZYNQMP_RESET_TTC1 45 +#define ZYNQMP_RESET_TTC2 46 +#define ZYNQMP_RESET_TTC3 47 +#define ZYNQMP_RESET_SWDT_CRL 48 +#define ZYNQMP_RESET_NAND 49 +#define ZYNQMP_RESET_ADMA 50 +#define ZYNQMP_RESET_GPIO 51 +#define ZYNQMP_RESET_IOU_CC 52 +#define ZYNQMP_RESET_TIMESTAMP 53 +#define ZYNQMP_RESET_RPU_R50 54 +#define ZYNQMP_RESET_RPU_R51 55 +#define ZYNQMP_RESET_RPU_AMBA 56 +#define ZYNQMP_RESET_OCM 57 +#define ZYNQMP_RESET_RPU_PGE 58 +#define ZYNQMP_RESET_USB0_CORERESET 59 +#define ZYNQMP_RESET_USB1_CORERESET 60 +#define ZYNQMP_RESET_USB0_HIBERRESET 61 +#define ZYNQMP_RESET_USB1_HIBERRESET 62 +#define ZYNQMP_RESET_USB0_APB 63 +#define ZYNQMP_RESET_USB1_APB 64 +#define ZYNQMP_RESET_IPI 65 +#define ZYNQMP_RESET_APM_LPD 66 +#define ZYNQMP_RESET_RTC 67 +#define ZYNQMP_RESET_SYSMON 68 +#define ZYNQMP_RESET_AFI_FM6 69 +#define ZYNQMP_RESET_LPD_SWDT 70 +#define ZYNQMP_RESET_FPD 71 +#define ZYNQMP_RESET_RPU_DBG1 72 +#define ZYNQMP_RESET_RPU_DBG0 73 +#define ZYNQMP_RESET_DBG_LPD 74 +#define ZYNQMP_RESET_DBG_FPD 75 +#define ZYNQMP_RESET_APLL 76 +#define ZYNQMP_RESET_DPLL 77 +#define ZYNQMP_RESET_VPLL 78 +#define ZYNQMP_RESET_IOPLL 79 +#define ZYNQMP_RESET_RPLL 80 +#define ZYNQMP_RESET_GPO3_PL_0 81 +#define ZYNQMP_RESET_GPO3_PL_1 82 +#define ZYNQMP_RESET_GPO3_PL_2 83 +#define ZYNQMP_RESET_GPO3_PL_3 84 +#define ZYNQMP_RESET_GPO3_PL_4 85 +#define ZYNQMP_RESET_GPO3_PL_5 86 +#define ZYNQMP_RESET_GPO3_PL_6 87 +#define ZYNQMP_RESET_GPO3_PL_7 88 +#define ZYNQMP_RESET_GPO3_PL_8 89 +#define ZYNQMP_RESET_GPO3_PL_9 90 +#define ZYNQMP_RESET_GPO3_PL_10 91 +#define ZYNQMP_RESET_GPO3_PL_11 92 +#define ZYNQMP_RESET_GPO3_PL_12 93 +#define ZYNQMP_RESET_GPO3_PL_13 94 +#define ZYNQMP_RESET_GPO3_PL_14 95 +#define ZYNQMP_RESET_GPO3_PL_15 96 +#define ZYNQMP_RESET_GPO3_PL_16 97 +#define ZYNQMP_RESET_GPO3_PL_17 98 +#define ZYNQMP_RESET_GPO3_PL_18 99 +#define ZYNQMP_RESET_GPO3_PL_19 100 +#define ZYNQMP_RESET_GPO3_PL_20 101 +#define ZYNQMP_RESET_GPO3_PL_21 102 +#define ZYNQMP_RESET_GPO3_PL_22 103 +#define ZYNQMP_RESET_GPO3_PL_23 104 +#define ZYNQMP_RESET_GPO3_PL_24 105 +#define ZYNQMP_RESET_GPO3_PL_25 106 +#define ZYNQMP_RESET_GPO3_PL_26 107 +#define ZYNQMP_RESET_GPO3_PL_27 108 +#define ZYNQMP_RESET_GPO3_PL_28 109 +#define ZYNQMP_RESET_GPO3_PL_29 110 +#define ZYNQMP_RESET_GPO3_PL_30 111 +#define ZYNQMP_RESET_GPO3_PL_31 112 +#define ZYNQMP_RESET_RPU_LS 113 +#define ZYNQMP_RESET_PS_ONLY 114 +#define ZYNQMP_RESET_PL 115 +#define ZYNQMP_RESET_PS_PL0 116 +#define ZYNQMP_RESET_PS_PL1 117 +#define ZYNQMP_RESET_PS_PL2 118 +#define ZYNQMP_RESET_PS_PL3 119 + +#endif diff --git a/include/dt-bindings/soc/bcm2835-pm.h b/include/dt-bindings/soc/bcm2835-pm.h new file mode 100644 index 000000000000..153d75b8d99f --- /dev/null +++ b/include/dt-bindings/soc/bcm2835-pm.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +#ifndef _DT_BINDINGS_ARM_BCM2835_PM_H +#define _DT_BINDINGS_ARM_BCM2835_PM_H + +#define BCM2835_POWER_DOMAIN_GRAFX 0 +#define BCM2835_POWER_DOMAIN_GRAFX_V3D 1 +#define BCM2835_POWER_DOMAIN_IMAGE 2 +#define BCM2835_POWER_DOMAIN_IMAGE_PERI 3 +#define BCM2835_POWER_DOMAIN_IMAGE_ISP 4 +#define BCM2835_POWER_DOMAIN_IMAGE_H264 5 +#define BCM2835_POWER_DOMAIN_USB 6 +#define BCM2835_POWER_DOMAIN_DSI0 7 +#define BCM2835_POWER_DOMAIN_DSI1 8 +#define BCM2835_POWER_DOMAIN_CAM0 9 +#define BCM2835_POWER_DOMAIN_CAM1 10 +#define BCM2835_POWER_DOMAIN_CCP2TX 11 +#define BCM2835_POWER_DOMAIN_HDMI 12 + +#define BCM2835_POWER_DOMAIN_COUNT 13 + +#define BCM2835_RESET_V3D 0 +#define BCM2835_RESET_ISP 1 +#define BCM2835_RESET_H264 2 + +#define BCM2835_RESET_COUNT 3 + +#endif /* _DT_BINDINGS_ARM_BCM2835_PM_H */ diff --git a/src/arc/abilis_tb100.dtsi b/src/arc/abilis_tb100.dtsi index 02410b211433..c0bcd97522bb 100644 --- a/src/arc/abilis_tb100.dtsi +++ b/src/arc/abilis_tb100.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -162,182 +162,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/src/arc/abilis_tb100_dvk.dts b/src/arc/abilis_tb100_dvk.dts index 3acf04db8030..c968e677db46 100644 --- a/src/arc/abilis_tb100_dvk.dts +++ b/src/arc/abilis_tb100_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/src/arc/abilis_tb101.dtsi b/src/arc/abilis_tb101.dtsi index f9e7686044eb..6a1615f58f05 100644 --- a/src/arc/abilis_tb101.dtsi +++ b/src/arc/abilis_tb101.dtsi @@ -38,7 +38,7 @@ clock-div = <6>; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { /* Port 1 */ pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ abilis,function = "mis0"; @@ -171,182 +171,182 @@ }; }; - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF140000 0x1000>; + reg = <0xff140000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioa"; }; - gpiob: gpio@FF141000 { + gpiob: gpio@ff141000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF141000 0x1000>; + reg = <0xff141000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiob"; }; - gpioc: gpio@FF142000 { + gpioc: gpio@ff142000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF142000 0x1000>; + reg = <0xff142000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioc"; }; - gpiod: gpio@FF143000 { + gpiod: gpio@ff143000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF143000 0x1000>; + reg = <0xff143000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiod"; }; - gpioe: gpio@FF144000 { + gpioe: gpio@ff144000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF144000 0x1000>; + reg = <0xff144000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioe"; }; - gpiof: gpio@FF145000 { + gpiof: gpio@ff145000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF145000 0x1000>; + reg = <0xff145000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiof"; }; - gpiog: gpio@FF146000 { + gpiog: gpio@ff146000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF146000 0x1000>; + reg = <0xff146000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <3>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiog"; }; - gpioh: gpio@FF147000 { + gpioh: gpio@ff147000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF147000 0x1000>; + reg = <0xff147000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <2>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioh"; }; - gpioi: gpio@FF148000 { + gpioi: gpio@ff148000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF148000 0x1000>; + reg = <0xff148000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <12>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioi"; }; - gpioj: gpio@FF149000 { + gpioj: gpio@ff149000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF149000 0x1000>; + reg = <0xff149000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <32>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpioj"; }; - gpiok: gpio@FF14a000 { + gpiok: gpio@ff14a000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14A000 0x1000>; + reg = <0xff14a000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <22>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiok"; }; - gpiol: gpio@FF14b000 { + gpiol: gpio@ff14b000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14B000 0x1000>; + reg = <0xff14b000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiol"; }; - gpiom: gpio@FF14c000 { + gpiom: gpio@ff14c000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14C000 0x1000>; + reg = <0xff14c000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <4>; gpio-ranges = <&iomux 0 0 0>; gpio-ranges-group-names = "gpiom"; }; - gpion: gpio@FF14d000 { + gpion: gpio@ff14d000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&tb10x_ictl>; interrupts = <27 2>; - reg = <0xFF14D000 0x1000>; + reg = <0xff14d000 0x1000>; gpio-controller; #gpio-cells = <2>; abilis,ngpio = <5>; diff --git a/src/arc/abilis_tb101_dvk.dts b/src/arc/abilis_tb101_dvk.dts index 37d88c5dd181..05143ce9c120 100644 --- a/src/arc/abilis_tb101_dvk.dts +++ b/src/arc/abilis_tb101_dvk.dts @@ -37,27 +37,27 @@ }; soc100 { - uart@FF100000 { + uart@ff100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; - ethernet@FE100000 { + ethernet@fe100000 { phy-mode = "rgmii"; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { i2c-sda-hold-time-ns = <432>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { i2c-sda-hold-time-ns = <432>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { i2c-sda-hold-time-ns = <432>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { i2c-sda-hold-time-ns = <432>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { i2c-sda-hold-time-ns = <432>; }; diff --git a/src/arc/abilis_tb10x.dtsi b/src/arc/abilis_tb10x.dtsi index 3121536b25a3..2fbf1bdfe6de 100644 --- a/src/arc/abilis_tb10x.dtsi +++ b/src/arc/abilis_tb10x.dtsi @@ -54,7 +54,7 @@ #size-cells = <1>; device_type = "soc"; ranges = <0xfe000000 0xfe000000 0x02000000 - 0x000F0000 0x000F0000 0x00010000>; + 0x000f0000 0x000f0000 0x00010000>; compatible = "abilis,tb10x", "simple-bus"; pll0: oscillator { @@ -75,10 +75,10 @@ clock-output-names = "ahb_clk"; }; - iomux: iomux@FF10601c { + iomux: iomux@ff10601c { compatible = "abilis,tb10x-iomux"; #gpio-range-cells = <3>; - reg = <0xFF10601c 0x4>; + reg = <0xff10601c 0x4>; }; intc: interrupt-controller { @@ -88,7 +88,7 @@ }; tb10x_ictl: pic@fe002000 { compatible = "abilis,tb10x-ictl"; - reg = <0xFE002000 0x20>; + reg = <0xfe002000 0x20>; interrupt-controller; #interrupt-cells = <2>; interrupt-parent = <&intc>; @@ -96,27 +96,27 @@ 20 21 22 23 24 25 26 27 28 29 30 31>; }; - uart@FF100000 { + uart@ff100000 { compatible = "snps,dw-apb-uart"; - reg = <0xFF100000 0x100>; + reg = <0xff100000 0x100>; clock-frequency = <166666666>; interrupts = <25 8>; reg-shift = <2>; reg-io-width = <4>; interrupt-parent = <&tb10x_ictl>; }; - ethernet@FE100000 { + ethernet@fe100000 { compatible = "snps,dwmac-3.70a","snps,dwmac"; - reg = <0xFE100000 0x1058>; + reg = <0xfe100000 0x1058>; interrupt-parent = <&tb10x_ictl>; interrupts = <6 8>; interrupt-names = "macirq"; clocks = <&ahb_clk>; clock-names = "stmmaceth"; }; - dma@FE000000 { + dma@fe000000 { compatible = "snps,dma-spear1340"; - reg = <0xFE000000 0x400>; + reg = <0xfe000000 0x400>; interrupt-parent = <&tb10x_ictl>; interrupts = <14 8>; dma-channels = <6>; @@ -132,70 +132,70 @@ multi-block = <1 1 1 1 1 1>; }; - i2c0: i2c@FF120000 { + i2c0: i2c@ff120000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF120000 0x1000>; + reg = <0xff120000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c1: i2c@FF121000 { + i2c1: i2c@ff121000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF121000 0x1000>; + reg = <0xff121000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c2: i2c@FF122000 { + i2c2: i2c@ff122000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF122000 0x1000>; + reg = <0xff122000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c3: i2c@FF123000 { + i2c3: i2c@ff123000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF123000 0x1000>; + reg = <0xff123000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - i2c4: i2c@FF124000 { + i2c4: i2c@ff124000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,designware-i2c"; - reg = <0xFF124000 0x1000>; + reg = <0xff124000 0x1000>; interrupt-parent = <&tb10x_ictl>; interrupts = <12 8>; clocks = <&ahb_clk>; }; - spi0: spi@0xFE010000 { + spi0: spi@fe010000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "abilis,tb100-spi"; num-cs = <1>; - reg = <0xFE010000 0x20>; + reg = <0xfe010000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <26 8>; clocks = <&ahb_clk>; }; - spi1: spi@0xFE011000 { + spi1: spi@fe011000 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "abilis,tb100-spi"; num-cs = <2>; - reg = <0xFE011000 0x20>; + reg = <0xfe011000 0x20>; interrupt-parent = <&tb10x_ictl>; interrupts = <10 8>; clocks = <&ahb_clk>; @@ -226,23 +226,23 @@ interrupts = <20 2>, <19 2>; interrupt-names = "cmd_irq", "event_irq"; }; - tb10x_mdsc0: tb10x-mdscr@FF300000 { + tb10x_mdsc0: tb10x-mdscr@ff300000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF300000 0x7000>; + reg = <0xff300000 0x7000>; tb100-mdscr-manage-tsin; }; - tb10x_mscr0: tb10x-mdscr@FF307000 { + tb10x_mscr0: tb10x-mdscr@ff307000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF307000 0x7000>; + reg = <0xff307000 0x7000>; }; tb10x_scr0: tb10x-mdscr@ff30e000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF30e000 0x4000>; + reg = <0xff30e000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_scr1: tb10x-mdscr@ff312000 { compatible = "abilis,tb100-mdscr"; - reg = <0xFF312000 0x4000>; + reg = <0xff312000 0x4000>; tb100-mdscr-manage-tsin; }; tb10x_wfb: tb10x-wfb@ff319000 { diff --git a/src/arc/axc001.dtsi b/src/arc/axc001.dtsi index fdc266504ada..37be3bf03ad6 100644 --- a/src/arc/axc001.dtsi +++ b/src/arc/axc001.dtsi @@ -41,7 +41,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -60,7 +60,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -88,7 +88,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; diff --git a/src/arc/axc003.dtsi b/src/arc/axc003.dtsi index d75d65ddf8e3..effa37536d7a 100644 --- a/src/arc/axc003.dtsi +++ b/src/arc/axc003.dtsi @@ -55,7 +55,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -74,7 +74,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -102,19 +102,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -132,7 +132,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -153,7 +153,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/src/arc/axc003_idu.dtsi b/src/arc/axc003_idu.dtsi index a05bb737ea63..e401e59f6180 100644 --- a/src/arc/axc003_idu.dtsi +++ b/src/arc/axc003_idu.dtsi @@ -62,7 +62,7 @@ * this GPIO block ORs all interrupts on CPU card (creg,..) * to uplink only 1 IRQ to ARC core intc */ - dw-apb-gpio@0x2000 { + dw-apb-gpio@2000 { compatible = "snps,dw-apb-gpio"; reg = < 0x2000 0x80 >; #address-cells = <1>; @@ -81,7 +81,7 @@ }; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <33333000>; @@ -109,19 +109,19 @@ * external DMA buffer located outside of IOC aperture. */ axs10x_mb { - ethernet@0x18000 { + ethernet@18000 { dma-coherent; }; - ehci@0x40000 { + ehci@40000 { dma-coherent; }; - ohci@0x60000 { + ohci@60000 { dma-coherent; }; - mmc@0x15000 { + mmc@15000 { dma-coherent; }; }; @@ -138,7 +138,7 @@ * avoid duplicating the MB dtsi file given that IRQ from * this intc to cpu intc are different for axs101 and axs103 */ - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0x0 0xe0012000 0x0 0x200 >; @@ -159,7 +159,7 @@ #size-cells = <2>; ranges; /* - * Move frame buffer out of IOC aperture (0x8z-0xAz). + * Move frame buffer out of IOC aperture (0x8z-0xaz). */ frame_buffer: frame_buffer@be000000 { compatible = "shared-dma-pool"; diff --git a/src/arc/axs10x_mb.dtsi b/src/arc/axs10x_mb.dtsi index 37bafd44e36d..4ead6dc9af2f 100644 --- a/src/arc/axs10x_mb.dtsi +++ b/src/arc/axs10x_mb.dtsi @@ -72,7 +72,7 @@ }; }; - gmac: ethernet@0x18000 { + gmac: ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -88,13 +88,13 @@ mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - ohci@0x60000 { + ohci@60000 { compatible = "generic-ohci"; reg = < 0x60000 0x100 >; interrupts = < 8 >; @@ -118,7 +118,7 @@ * dw_mci_pltfm_prepare_command() is used in generic platform * code. */ - mmc@0x15000 { + mmc@15000 { compatible = "altr,socfpga-dw-mshc"; reg = < 0x15000 0x400 >; fifo-depth = < 16 >; @@ -129,7 +129,7 @@ bus-width = < 4 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <33333333>; @@ -139,7 +139,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <33333333>; @@ -150,7 +150,7 @@ }; /* UART muxed with USB data port (ttyS3) */ - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <33333333>; @@ -160,7 +160,7 @@ reg-io-width = <4>; }; - i2c@0x1d000 { + i2c@1d000 { compatible = "snps,designware-i2c"; reg = <0x1d000 0x100>; clock-frequency = <400000>; @@ -177,7 +177,7 @@ #sound-dai-cells = <0>; }; - i2c@0x1f000 { + i2c@1f000 { compatible = "snps,designware-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -218,13 +218,13 @@ }; }; - eeprom@0x54{ + eeprom@54{ compatible = "atmel,24c01"; reg = <0x54>; pagesize = <0x8>; }; - eeprom@0x57{ + eeprom@57{ compatible = "atmel,24c04"; reg = <0x57>; pagesize = <0x8>; diff --git a/src/arc/hsdk.dts b/src/arc/hsdk.dts index 43f17b51ee89..7425bb0f2d1b 100644 --- a/src/arc/hsdk.dts +++ b/src/arc/hsdk.dts @@ -18,8 +18,8 @@ model = "snps,hsdk"; compatible = "snps,hsdk"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; @@ -105,17 +105,17 @@ #size-cells = <1>; interrupt-parent = <&idu_intc>; - ranges = <0x00000000 0xf0000000 0x10000000>; + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; cgu_rst: reset-controller@8a0 { compatible = "snps,hsdk-reset"; #reset-cells = <1>; - reg = <0x8A0 0x4>, <0xFF0 0x4>; + reg = <0x8a0 0x4>, <0xff0 0x4>; }; core_clk: core-clk@0 { compatible = "snps,hsdk-core-pll-clock"; - reg = <0x00 0x10>, <0x14B8 0x4>; + reg = <0x00 0x10>, <0x14b8 0x4>; #clock-cells = <0>; clocks = <&input_clk>; @@ -167,6 +167,18 @@ #clock-cells = <0>; }; + dmac_core_clk: dmac-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_cfg_clk: dmac-gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + gmac: ethernet@8000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; @@ -200,6 +212,7 @@ compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; reg = <0x60000 0x100>; interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; dma-coherent; }; @@ -207,6 +220,7 @@ compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; reg = <0x40000 0x100>; interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; dma-coherent; }; @@ -237,12 +251,28 @@ reg = <0>; }; }; + + dmac: dmac@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + interrupts = <27>; + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; + clock-names = "core-clk", "cfgr-clk"; + + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; }; memory@80000000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GiB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ }; }; diff --git a/src/arc/vdk_axc003.dtsi b/src/arc/vdk_axc003.dtsi index 0fd6ba985b16..84e8766c8ca2 100644 --- a/src/arc/vdk_axc003.dtsi +++ b/src/arc/vdk_axc003.dtsi @@ -36,7 +36,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -49,7 +49,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/src/arc/vdk_axc003_idu.dtsi b/src/arc/vdk_axc003_idu.dtsi index 28956f9a9f3d..eb7e705e8a27 100644 --- a/src/arc/vdk_axc003_idu.dtsi +++ b/src/arc/vdk_axc003_idu.dtsi @@ -44,7 +44,7 @@ #interrupt-cells = <1>; }; - debug_uart: dw-apb-uart@0x5000 { + debug_uart: dw-apb-uart@5000 { compatible = "snps,dw-apb-uart"; reg = <0x5000 0x100>; clock-frequency = <2403200>; @@ -57,7 +57,7 @@ }; - mb_intc: dw-apb-ictl@0xe0012000 { + mb_intc: dw-apb-ictl@e0012000 { #interrupt-cells = <1>; compatible = "snps,dw-apb-ictl"; reg = < 0xe0012000 0x200 >; diff --git a/src/arc/vdk_axs10x_mb.dtsi b/src/arc/vdk_axs10x_mb.dtsi index 48bb4b4cd234..925d5cc95dbb 100644 --- a/src/arc/vdk_axs10x_mb.dtsi +++ b/src/arc/vdk_axs10x_mb.dtsi @@ -36,7 +36,7 @@ }; }; - ethernet@0x18000 { + ethernet@18000 { #interrupt-cells = <1>; compatible = "snps,dwmac"; reg = < 0x18000 0x2000 >; @@ -49,13 +49,13 @@ clock-names = "stmmaceth"; }; - ehci@0x40000 { + ehci@40000 { compatible = "generic-ehci"; reg = < 0x40000 0x100 >; interrupts = < 8 >; }; - uart@0x20000 { + uart@20000 { compatible = "snps,dw-apb-uart"; reg = <0x20000 0x100>; clock-frequency = <2403200>; @@ -65,7 +65,7 @@ reg-io-width = <4>; }; - uart@0x21000 { + uart@21000 { compatible = "snps,dw-apb-uart"; reg = <0x21000 0x100>; clock-frequency = <2403200>; @@ -75,7 +75,7 @@ reg-io-width = <4>; }; - uart@0x22000 { + uart@22000 { compatible = "snps,dw-apb-uart"; reg = <0x22000 0x100>; clock-frequency = <2403200>; @@ -101,7 +101,7 @@ interrupt-names = "arc_ps2_irq"; }; - mmc@0x15000 { + mmc@15000 { compatible = "snps,dw-mshc"; reg = <0x15000 0x400>; fifo-depth = <1024>; @@ -117,11 +117,11 @@ * Embedded Vision subsystem UIO mappings; only relevant for EV VDK * * This node is intentionally put outside of MB above becase - * it maps areas outside of MB's 0xEz-0xFz. + * it maps areas outside of MB's 0xez-0xfz. */ - uio_ev: uio@0xD0000000 { + uio_ev: uio@d0000000 { compatible = "generic-uio"; - reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; interrupt-parent = <&mb_intc>; interrupts = <23>; diff --git a/src/arm/alphascale-asm9260.dtsi b/src/arm/alphascale-asm9260.dtsi index 907fc7bfc418..2ce6038536fd 100644 --- a/src/arm/alphascale-asm9260.dtsi +++ b/src/arm/alphascale-asm9260.dtsi @@ -4,10 +4,11 @@ * Licensed under the X11 license or the GPL v2 (or later) */ -#include "skeleton.dtsi" #include / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&icoll>; memory { diff --git a/src/arm/alpine.dtsi b/src/arm/alpine.dtsi index 731df7a8c4e6..d3036ea823d1 100644 --- a/src/arm/alpine.dtsi +++ b/src/arm/alpine.dtsi @@ -25,12 +25,18 @@ */ #include -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; /* SOC compatibility */ compatible = "al,alpine"; + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + /* CPU Configuration */ cpus { #address-cells = <1>; diff --git a/src/arm/am335x-baltos-ir2110.dts b/src/arm/am335x-baltos-ir2110.dts index 75de1e723303..50dcf1290ac6 100644 --- a/src/arm/am335x-baltos-ir2110.dts +++ b/src/arm/am335x-baltos-ir2110.dts @@ -72,7 +72,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/src/arm/am335x-baltos-ir3220.dts b/src/arm/am335x-baltos-ir3220.dts index 1b215c425c57..f3f1abd26470 100644 --- a/src/arm/am335x-baltos-ir3220.dts +++ b/src/arm/am335x-baltos-ir3220.dts @@ -114,7 +114,3 @@ dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; - -&phy_sel { - rmii-clock-ext = <1>; -}; diff --git a/src/arm/am335x-baltos-ir5221.dts b/src/arm/am335x-baltos-ir5221.dts index 832ead864dc5..42f473f0ed77 100644 --- a/src/arm/am335x-baltos-ir5221.dts +++ b/src/arm/am335x-baltos-ir5221.dts @@ -133,10 +133,6 @@ phy-handle = <&phy1>; }; -&phy_sel { - rmii-clock-ext = <1>; -}; - &dcan1 { pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins>; diff --git a/src/arm/am335x-chiliboard.dts b/src/arm/am335x-chiliboard.dts index 9c2a947aacf5..bffa5dce54ec 100644 --- a/src/arm/am335x-chiliboard.dts +++ b/src/arm/am335x-chiliboard.dts @@ -14,6 +14,10 @@ compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -151,10 +155,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - /* USB */ &usb { status = "okay"; diff --git a/src/arm/am335x-evm.dts b/src/arm/am335x-evm.dts index dce5be5df97b..edcff79879e7 100644 --- a/src/arm/am335x-evm.dts +++ b/src/arm/am335x-evm.dts @@ -57,6 +57,24 @@ enable-active-high; }; + /* TPS79501 */ + v1_8d_reg: fixedregulator-v1_8d { + compatible = "regulator-fixed"; + regulator-name = "v1_8d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* TPS79501 */ + v3_3d_reg: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "v3_3d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + matrix_keypad: matrix_keypad0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; @@ -499,10 +517,10 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&vaux2_reg>; - IOVDD-supply = <&vaux2_reg>; - DRVDD-supply = <&vaux2_reg>; - DVDD-supply = <&vbat>; + AVDD-supply = <&v3_3d_reg>; + IOVDD-supply = <&v3_3d_reg>; + DRVDD-supply = <&v3_3d_reg>; + DVDD-supply = <&v1_8d_reg>; }; }; diff --git a/src/arm/am335x-evmsk.dts b/src/arm/am335x-evmsk.dts index b128998097ce..2c2d8b5b8cf5 100644 --- a/src/arm/am335x-evmsk.dts +++ b/src/arm/am335x-evmsk.dts @@ -73,6 +73,24 @@ enable-active-high; }; + /* TPS79518 */ + v1_8d_reg: fixedregulator-v1_8d { + compatible = "regulator-fixed"; + regulator-name = "v1_8d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* TPS78633 */ + v3_3d_reg: fixedregulator-v3_3d { + compatible = "regulator-fixed"; + regulator-name = "v3_3d"; + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -501,10 +519,10 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&vaux2_reg>; - IOVDD-supply = <&vaux2_reg>; - DRVDD-supply = <&vaux2_reg>; - DVDD-supply = <&vbat>; + AVDD-supply = <&v3_3d_reg>; + IOVDD-supply = <&v3_3d_reg>; + DRVDD-supply = <&v3_3d_reg>; + DVDD-supply = <&v1_8d_reg>; }; }; diff --git a/src/arm/am335x-guardian.dts b/src/arm/am335x-guardian.dts new file mode 100644 index 000000000000..c9611ea4b884 --- /dev/null +++ b/src/arm/am335x-guardian.dts @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Robert Bosch Power Tools GmbH + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include +#include + +/ { + model = "Bosch AM335x Guardian"; + compatible = "bosch,am335x-guardian", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer2; + }; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + button21 { + label = "guardian-power-button"; + linux,code = ; + gpios = <&gpio2 21 0>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led1 { + label = "green:heartbeat"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:mmc0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>; + pinctrl-1 = <&lcd_pins_sleep>; + + display-timings { + 320x240 { + hactive = <320>; + vactive = <240>; + hback-porch = <68>; + hfront-porch = <20>; + hsync-len = <1>; + vback-porch = <18>; + vfront-porch = <4>; + vsync-len = <1>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <24>; + bus-width = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + }; + + pwm7: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer7>; + pinctrl-names = "default"; + pinctrl-0 = <&dmtimer7_pins>; + }; + + vmmcsd_fixed: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cppi41dma { + status = "okay"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */ + status = "okay"; + + nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-ecc-opt = "bch16"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + /* + * MTD partition table + * + * All SPL-* partitions are sized to minimal length which can + * be independently programmable. For NAND flash this is equal + * to size of erase-block. + */ + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0x40000>; + }; + + partition@1 { + label = "SPL.backup1"; + reg = <0x40000 0x40000>; + }; + + partition@2 { + label = "SPL.backup2"; + reg = <0x80000 0x40000>; + }; + + partition@3 { + label = "SPL.backup3"; + reg = <0xc0000 0x40000>; + }; + + partition@4 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + + partition@5 { + label = "u-boot.backup1"; + reg = <0x200000 0x100000>; + }; + + partition@6 { + label = "u-boot-env"; + reg = <0x300000 0x40000>; + }; + + partition@7 { + label = "u-boot-env.backup1"; + reg = <0x340000 0x40000>; + }; + + partition@8 { + label = "UBI"; + reg = <0x380000 0x1fc80000>; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + tps: tps@24 { + reg = <0x24>; + }; +}; + +&lcdc { + blue-and-red-wiring = "crossed"; + status = "okay"; +}; + +&mmc1 { + bus-width = <0x4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; + status = "okay"; +}; + +&rtc { + clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; + clock-names = "ext-clk", "int-clk"; + system-power-controller; +}; + +&spi0 { + ti,pindir-d0-out-d1-in; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + interrupt-parent = <&intc>; + interrupts = <7>; /* NMI */ + + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <100>; + }; + + regulators { + dcdc1_reg: regulator@0 { + regulator-name = "vdds_dpr"; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1351500>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-name = "vio,vrtc,vdds"; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-name = "vdd_3v3aux"; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-name = "vdd_3v3a"; + regulator-always-on; + }; + }; +}; + +&tscadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&clkout2_pin &gpio_pins>; + + clkout2_pin: pinmux_clkout2_pin { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; + + dmtimer7_pins: pinmux_dmtimer7_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + >; + }; + + gpio_keys_pins: pinmux_gpio_keys_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + >; + }; + + gpio_pins: pinmux_gpio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + lcd_disen_pins: pinmux_lcd_disen_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + lcd_pins_default: pinmux_lcd_pins_default { + pinctrl-single,pins = < + AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + >; + }; + + lcd_pins_sleep: pinmux_lcd_pins_sleep { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + >; + }; + + spi0_pins: pinmux_spi0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + >; + }; + + nandflash_pins: pinmux_nandflash_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) + >; + }; +}; diff --git a/src/arm/am335x-icev2.dts b/src/arm/am335x-icev2.dts index f2005ecca74f..9ac775c71072 100644 --- a/src/arm/am335x-icev2.dts +++ b/src/arm/am335x-icev2.dts @@ -484,10 +484,6 @@ dual_emac; }; -&phy_sel { - rmii-clock-ext; -}; - &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; diff --git a/src/arm/am335x-igep0033.dtsi b/src/arm/am335x-igep0033.dtsi index 55b4c94cfafb..cbd22f25de95 100644 --- a/src/arm/am335x-igep0033.dtsi +++ b/src/arm/am335x-igep0033.dtsi @@ -123,10 +123,6 @@ phy-mode = "rmii"; }; -&phy_sel { - rmii-clock-ext; -}; - &elm { status = "okay"; }; diff --git a/src/arm/am335x-lxm.dts b/src/arm/am335x-lxm.dts index 481edcfaf121..d0e8e720a4d6 100644 --- a/src/arm/am335x-lxm.dts +++ b/src/arm/am335x-lxm.dts @@ -328,10 +328,6 @@ dual_emac_res_vlan = <3>; }; -&phy_sel { - rmii-clock-ext; -}; - &mac { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; diff --git a/src/arm/am335x-moxa-uc-2100-common.dtsi b/src/arm/am335x-moxa-uc-2100-common.dtsi index 14f781953475..cb5913a69837 100644 --- a/src/arm/am335x-moxa-uc-2100-common.dtsi +++ b/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -159,11 +159,6 @@ status = "okay"; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/src/arm/am335x-moxa-uc-8100-me-t.dts b/src/arm/am335x-moxa-uc-8100-me-t.dts index 5a58efc0c874..e562ce40f290 100644 --- a/src/arm/am335x-moxa-uc-8100-me-t.dts +++ b/src/arm/am335x-moxa-uc-8100-me-t.dts @@ -446,11 +446,6 @@ dual_emac_res_vlan = <2>; }; -&phy_sel { - reg= <0x44e10650 0xf5>; - rmii-clock-ext; -}; - &sham { status = "okay"; }; diff --git a/src/arm/am335x-phycore-som.dtsi b/src/arm/am335x-phycore-som.dtsi index 428a25e952b0..015adb626b03 100644 --- a/src/arm/am335x-phycore-som.dtsi +++ b/src/arm/am335x-phycore-som.dtsi @@ -100,10 +100,6 @@ status = "okay"; }; -&phy_sel { - rmii-clock-ext; -}; - /* I2C Busses */ &am33xx_pinmux { i2c0_pins: pinmux_i2c0 { diff --git a/src/arm/am335x-shc.dts b/src/arm/am335x-shc.dts index 5b250060f6dd..bfbe27a80006 100644 --- a/src/arm/am335x-shc.dts +++ b/src/arm/am335x-shc.dts @@ -1,11 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * support for the bosch am335x based shc c3 board * * Copyright, C) 2015 Heiko Schocher * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ /dts-v1/; diff --git a/src/arm/am33xx-l4.dtsi b/src/arm/am33xx-l4.dtsi index 7b818d9d2eab..ca6d9f02a800 100644 --- a/src/arm/am33xx-l4.dtsi +++ b/src/arm/am33xx-l4.dtsi @@ -279,17 +279,9 @@ #pinctrl-cells = <1>; ranges = <0 0 0x2000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am33xx_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x238>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; @@ -302,6 +294,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am3352-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -717,7 +715,6 @@ interrupts = <40 41 42 43>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -733,11 +730,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; }; }; }; @@ -1763,7 +1762,7 @@ reg = <0xcc000 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>; + clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; @@ -1786,7 +1785,7 @@ reg = <0xd0000 0x4>; reg-names = "rev"; /* Domains (P, C): per_pwrdm, l4ls_clkdm */ - clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>; + clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; diff --git a/src/arm/am3874-iceboard.dts b/src/arm/am3874-iceboard.dts new file mode 100644 index 000000000000..883fb85135d4 --- /dev/null +++ b/src/arm/am3874-iceboard.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for Winterland IceBoard + * + * http://mcgillcosmology.com + * http://threespeedlogic.com + * + * This is an ARM + FPGA instrumentation board used at telescopes in + * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO + * observatory in British Columbia (CHIME). + * + * Copyright (c) 2019 Three-Speed Logic, Inc. + */ + +/dts-v1/; + +#include "dm814x.dtsi" +#include + +/ { + model = "Winterland IceBoard"; + compatible = "ti,dm8148", "ti,dm814"; + + chosen { + stdout-path = "serial1:115200n8"; + bootargs = "earlycon"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vmmcsd_fixed: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +/* The MAC provides internal delay for the transmit path ONLY, which is enabled + * provided no -id/-txid/-rxid suffix is provided to "phy-mode". + * + * The receive path is delayed at the PHY. The recommended register settings + * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the + * conversion code in the kernel lies: the PHY's registers are 120 ps per tap, + * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to + * obtain the correct register settings. + */ +&mac { dual_emac = <1>; }; +&cpsw_emac0 { + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; +&cpsw_emac1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0x2>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0x1>; + + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + + rxd3-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd0-skew-ps = <0>; + + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc1 { status = "disabled"; }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; +&mmc3 { status = "disabled"; }; + +&i2c1 { + /* Most I2C activity happens through this port, with the sole exception + * of the backplane. Since there are multiply assigned addresses, the + * "i2c-mux-idle-disconnect" is important. + */ + + pca9548@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + /* FMC A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + i2c-mux-idle-disconnect; + }; + + i2c@1 { + /* FMC B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + i2c-mux-idle-disconnect; + }; + + i2c@2 { + /* QSFP A */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + i2c-mux-idle-disconnect; + }; + + i2c@3 { + /* QSFP B */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + i2c-mux-idle-disconnect; + }; + + i2c@4 { + /* SFP */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + i2c-mux-idle-disconnect; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + i2c-mux-idle-disconnect; + + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; + ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; + ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; }; + + ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; }; + ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; }; + ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; }; + + ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; }; + ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; }; + ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; }; + ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; }; + ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; }; + ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; }; + ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; }; + ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; }; + ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; }; + }; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + i2c-mux-idle-disconnect; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + i2c-mux-idle-disconnect; + + u41: pca9575@20 { + compatible = "nxp,pca9575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C", + "FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS", + "FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C", + "FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u42: pca9575@21 { + compatible = "nxp,pca9575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL", + "QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL", + "SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1", + "QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u48: pca9575@22 { + compatible = "nxp,pca9575"; + reg=<0x22>; + gpio-controller; + #gpio-cells = <2>; + + sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>, + <&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>; + led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>, + <&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>; + + gpio-line-names = + "GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4", + "GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8", + "GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5", + "GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + u59: pca9575@23 { + compatible = "nxp,pca9575"; + reg=<0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12", + "GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault", + "BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3", + "BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17"; + reset_gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; + }; + + tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; }; + tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; }; + tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; }; + tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; }; + + /* EEPROM bank and serial number are treated as separate devices */ + at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; }; + at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; }; + }; + }; +}; + +&i2c2 { + pca9548@71 { + compatible = "nxp,pca9548"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@6 { + /* Backplane */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + multi-master; + + /* All backplanes should have this -- it's how we know they're there. */ + at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; }; + at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; }; + + /* 16 slot backplane */ + tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; }; + tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; }; + ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; }; + amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; }; + + /* Single slot backplane */ + }; + }; +}; + +&pincntl { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */ + DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */ + DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */ + DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */ + DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */ + DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */ + DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40) /* SD1_POW */ + DM814X_IOPAD(0x0928, PIN_INPUT | 0x40) /* SD1_SDWP */ + DM814X_IOPAD(0x093C, PIN_INPUT | 0x2) /* SD1_SDCD */ + >; + }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ + >; + }; + + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80) /* PROGRAM_B */ + DM814X_IOPAD(0x0820, PIN_INPUT | 0x80) /* INIT_B */ + DM814X_IOPAD(0x0824, PIN_INPUT | 0x80) /* DONE */ + + DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */ + DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */ + DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */ + DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */ + DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */ + + DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */ + DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */ + DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */ + DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */ + DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */ + + DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */ + DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */ + DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */ + DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */ + >; + }; + + gpio2_pins: pinmux_gpio2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */ + DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */ + DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */ + DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */ + + //DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */ + //DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */ + DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */ + >; + }; + + gpio4_pins: pinmux_gpio4_pins { + pinctrl-single,pins = < + /* The PLL doesn't react well to the SPI controller reset, so + * we force the CS lines to pull up as GPIOs until we're ready. + * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3 + */ + DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */ + DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */ + DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */ + DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */ + DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */ + DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */ + >; + }; + + spi2_pins: pinmux_spi2_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */ + DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */ + >; + }; + + spi4_pins: pinmux_spi4_pins { + pinctrl-single,pins = < + DM814X_IOPAD(0x0a7c, 0x20) + DM814X_IOPAD(0x0b74, 0x20) + DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20) + DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20) + DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20) + >; + }; +}; + +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; + gpio-line-names = + "", "PROGRAM_B", "INIT_B", "DONE", /* 0-3 */ + "", "", "", "", /* 4-7 */ + "FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI", /* 8-11 */ + "", "", "", "FMCA_TRST", /* 12-15 */ + "FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI", /* 16-19 */ + "FMCB_TRST", "", "", "", /* 20-23 */ + "FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI", /* 24-27 */ + "", "", "", ""; /* 28-31 */ +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_pins>; + gpio-line-names = + "PHYA_IRQ_N", "PHYA_RESET_N", "", "", /* 0-3 */ + "", "", "", "PHYB_IRQ_N", /* 4-7 */ + "PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", ""; /* 8-11 */ +}; + +&gpio3 { + pinctrl-names = "default"; + /*pinctrl-0 = <&gpio3_pins>;*/ + gpio-line-names = + "", "", "ARMClkSel0", "", /* 0-3 */ + "EnFPGARef", "", "", "ARMClkSel1"; /* 4-7 */ +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio4_pins>; + gpio-line-names = + "BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3", + "BP_ARM_GPIO4", "BP_ARM_GPIO5"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; +}; + +&mcspi1 { + s25fl256@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + fsbl@0 { + /* 256 kB */ + label = "U-Boot-min"; + reg = <0 0x40000>; + }; + ssbl@1 { + /* 512 kB */ + label = "U-Boot"; + reg = <0x40000 0x80000>; + }; + bootenv@2 { + /* 256 kB */ + label = "U-Boot Env"; + reg = <0xc0000 0x40000>; + }; + kernel@3 { + /* 4 MB */ + label = "Kernel"; + reg = <0x100000 0x400000>; + }; + ipmi@4 { + label = "IPMI FRU"; + reg = <0x500000 0x40000>; + }; + fs@5 { + label = "File System"; + reg = <0x540000 0x1ac0000>; + }; + }; +}; + +&mcspi3 { + /* DMA event numbers stolen from MCASP */ + dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17 + &edma_xbar 10 0 18 &edma_xbar 11 0 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + + /* DMA event numbers stolen from MCASP, MCBSP */ + dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>; + dma-names = "tx0", "rx0"; +}; diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts index f4a20cade808..4c6ee37ea573 100644 --- a/src/arm/am437x-gp-evm.dts +++ b/src/arm/am437x-gp-evm.dts @@ -71,7 +71,7 @@ pinctrl-0 = <&matrix_keypad_default>; pinctrl-1 = <&matrix_keypad_sleep>; - linux,wakeup; + wakeup-source; row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ diff --git a/src/arm/am437x-l4.dtsi b/src/arm/am437x-l4.dtsi index ca0896f80248..85c6f4ff1824 100644 --- a/src/arm/am437x-l4.dtsi +++ b/src/arm/am437x-l4.dtsi @@ -280,12 +280,6 @@ #size-cells = <1>; ranges = <0 0 0x4000>; - phy_sel: cpsw-phy-sel@650 { - compatible = "ti,am43xx-cpsw-phy-sel"; - reg= <0x650 0x4>; - reg-names = "gmii-sel"; - }; - am43xx_pinmux: pinmux@800 { compatible = "ti,am437-padconf", "pinctrl-single"; @@ -300,11 +294,17 @@ }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,am43xx-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <2>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -555,7 +555,6 @@ cpts_clock_shift = <29>; ranges = <0 0 0x8000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; davinci_mdio: mdio@1000 { compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; @@ -572,11 +571,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 0>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 0>; }; }; }; diff --git a/src/arm/am43x-epos-evm.dts b/src/arm/am43x-epos-evm.dts index 4ea753b3ee43..9dfd80e3b76e 100644 --- a/src/arm/am43x-epos-evm.dts +++ b/src/arm/am43x-epos-evm.dts @@ -584,10 +584,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; phy-mode = "rmii"; -}; - -&phy_sel { - rmii-clock-ext; + phys = <&phy_gmii_sel 1 1>; }; &i2c0 { diff --git a/src/arm/arm-realview-eb.dtsi b/src/arm/arm-realview-eb.dtsi index 0e4c7c4c8c09..610506723ea5 100644 --- a/src/arm/arm-realview-eb.dtsi +++ b/src/arm/arm-realview-eb.dtsi @@ -22,9 +22,10 @@ #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-eb"; chosen { }; @@ -38,6 +39,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/arm-realview-pb1176.dts b/src/arm/arm-realview-pb1176.dts index 83e0fbc4a1a1..cbbb8878daa3 100644 --- a/src/arm/arm-realview-pb1176.dts +++ b/src/arm/arm-realview-pb1176.dts @@ -23,9 +23,10 @@ /dts-v1/; #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB1176"; compatible = "arm,realview-pb1176"; @@ -40,6 +41,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/arm-realview-pb11mp.dts b/src/arm/arm-realview-pb11mp.dts index 2f6aa24a0b67..2015619ca22c 100644 --- a/src/arm/arm-realview-pb11mp.dts +++ b/src/arm/arm-realview-pb11mp.dts @@ -23,9 +23,10 @@ /dts-v1/; #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "ARM RealView PB11MPcore"; compatible = "arm,realview-pb11mp"; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* * The PB11MPCore has 512 MiB memory @ 0x70000000 * and the first 256 are also remapped @ 0x00000000 diff --git a/src/arm/arm-realview-pbx.dtsi b/src/arm/arm-realview-pbx.dtsi index 916a97734f84..a81e9c282432 100644 --- a/src/arm/arm-realview-pbx.dtsi +++ b/src/arm/arm-realview-pbx.dtsi @@ -22,9 +22,10 @@ #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "arm,realview-pbx"; chosen { }; @@ -39,6 +40,7 @@ }; memory { + device_type = "memory"; /* 128 MiB memory @ 0x0 */ reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/armada-370-rd.dts b/src/arm/armada-370-rd.dts index 2bfb3108b5b2..c910d157a686 100644 --- a/src/arm/armada-370-rd.dts +++ b/src/arm/armada-370-rd.dts @@ -114,48 +114,6 @@ }; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan3"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/src/arm/armada-388-clearfog.dts b/src/arm/armada-388-clearfog.dts index 89a354b43978..20f8d4667753 100644 --- a/src/arm/armada-388-clearfog.dts +++ b/src/arm/armada-388-clearfog.dts @@ -30,64 +30,6 @@ }; }; - dsa@0 { - status = "disabled"; - - compatible = "marvell,dsa"; - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; - pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <0>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4 0>; - - port@0 { - reg = <0>; - label = "lan5"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&rear_button_pins>; diff --git a/src/arm/armada-388-clearfog.dtsi b/src/arm/armada-388-clearfog.dtsi index 1b0d0680c8b6..0d81600ca247 100644 --- a/src/arm/armada-388-clearfog.dtsi +++ b/src/arm/armada-388-clearfog.dtsi @@ -93,6 +93,7 @@ bm,pool-long = <2>; bm,pool-short = <1>; buffer-manager = <&bm>; + phys = <&comphy1 1>; phy-mode = "sgmii"; status = "okay"; }; @@ -103,6 +104,7 @@ bm,pool-short = <1>; buffer-manager = <&bm>; managed = "in-band-status"; + phys = <&comphy5 2>; phy-mode = "sgmii"; sfp = <&sfp>; status = "okay"; diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi index 929459c42760..96c18703e471 100644 --- a/src/arm/armada-38x.dtsi +++ b/src/arm/armada-38x.dtsi @@ -9,13 +9,15 @@ * Thomas Petazzoni */ -#include "skeleton.dtsi" #include #include #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 38x family SoC"; compatible = "marvell,armada380"; @@ -335,6 +337,43 @@ #clock-cells = <1>; }; + comphy: phy@18300 { + compatible = "marvell,armada-380-comphy"; + reg = <0x18300 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + coreclk: mvebu-sar@18600 { compatible = "marvell,armada-380-core-clock"; reg = <0x18600 0x04>; diff --git a/src/arm/armada-39x.dtsi b/src/arm/armada-39x.dtsi index f0c949831efb..b1b86934c688 100644 --- a/src/arm/armada-39x.dtsi +++ b/src/arm/armada-39x.dtsi @@ -7,13 +7,14 @@ * Thomas Petazzoni */ -#include "skeleton.dtsi" #include #include #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Armada 39x family SoC"; compatible = "marvell,armada390"; diff --git a/src/arm/armada-xp-linksys-mamba.dts b/src/arm/armada-xp-linksys-mamba.dts index 7a2606c3b62e..8480a16919a0 100644 --- a/src/arm/armada-xp-linksys-mamba.dts +++ b/src/arm/armada-xp-linksys-mamba.dts @@ -210,53 +210,6 @@ compatible = "pwm-fan"; pwms = <&gpio0 24 4000>; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pciec { diff --git a/src/arm/artpec6.dtsi b/src/arm/artpec6.dtsi index 3e4115c2cd75..037157e6c5ee 100644 --- a/src/arm/artpec6.dtsi +++ b/src/arm/artpec6.dtsi @@ -43,9 +43,10 @@ #include #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "axis,artpec6"; interrupt-parent = <&intc>; diff --git a/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts b/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts index bdfd8c9f3a7c..521afbea2c5b 100644 --- a/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts +++ b/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -173,6 +173,16 @@ }; }; }; + + dps650ab@58 { + compatible = "delta,dps650ab"; + reg = <0x58>; + }; + + dps650ab@59 { + compatible = "delta,dps650ab"; + reg = <0x59>; + }; }; &i2c9 { diff --git a/src/arm/aspeed-bmc-facebook-tiogapass.dts b/src/arm/aspeed-bmc-facebook-tiogapass.dts index f8e7b71af7e6..4c2dcac738e8 100644 --- a/src/arm/aspeed-bmc-facebook-tiogapass.dts +++ b/src/arm/aspeed-bmc-facebook-tiogapass.dts @@ -21,6 +21,17 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; }; &fmc { @@ -43,6 +54,16 @@ }; }; +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + // Enable lpc clock + status = "okay"; +}; + &uart1 { // Host Console status = "okay"; @@ -51,11 +72,33 @@ &pinctrl_rxd1_default>; }; +&uart2 { + // SoL Host Console + status = "okay"; +}; + +&uart3 { + // SoL BMC Console + status = "okay"; +}; + &uart5 { // BMC Console status = "okay"; }; +&kcs2 { + // BMC KCS channel 2 + status = "okay"; + kcs_addr = <0xca8>; +}; + +&kcs3 { + // BMC KCS channel 3 + status = "okay"; + kcs_addr = <0xca2>; +}; + &mac0 { status = "okay"; @@ -64,6 +107,10 @@ use-ncsi; }; +&adc { + status = "okay"; +}; + &i2c0 { status = "okay"; //Airmax Conn B, CPU0 PIROM, CPU1 PIROM @@ -122,6 +169,10 @@ &i2c8 { status = "okay"; + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; //Mezz Sensor SMBus }; @@ -140,7 +191,7 @@ }; fan@1 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; }; }; diff --git a/src/arm/aspeed-bmc-inspur-on5263m5.dts b/src/arm/aspeed-bmc-inspur-on5263m5.dts new file mode 100644 index 000000000000..2337ee23f5c4 --- /dev/null +++ b/src/arm/aspeed-bmc-inspur-on5263m5.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Inspur Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include + +/ { + model = "ON5263M5 BMC"; + compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + bmc_alive { + label = "bmc_alive"; + gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c6 { + status = "okay"; + + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + + adm1278@11 { + compatible = "adi,adm1278"; + reg = <0x11>; + }; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; +}; + +&adc { + status = "okay"; +}; diff --git a/src/arm/aspeed-bmc-opp-palmetto.dts b/src/arm/aspeed-bmc-opp-palmetto.dts index 9aa1d4467453..b854ac0bae9a 100644 --- a/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/src/arm/aspeed-bmc-opp-palmetto.dts @@ -169,6 +169,11 @@ &i2c3 { status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; }; &i2c4 { diff --git a/src/arm/aspeed-bmc-quanta-q71l.dts b/src/arm/aspeed-bmc-quanta-q71l.dts index 385c0f4b69ee..0d7c6339da46 100644 --- a/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/src/arm/aspeed-bmc-quanta-q71l.dts @@ -116,6 +116,10 @@ status = "okay"; }; +&lpc_ctrl { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -134,6 +138,10 @@ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; }; +&uart1 { + status = "okay"; +}; + &uart5 { status = "okay"; }; diff --git a/src/arm/aspeed-g4.dtsi b/src/arm/aspeed-g4.dtsi index 69f6b9d2e7e7..9549f867aa1e 100644 --- a/src/arm/aspeed-g4.dtsi +++ b/src/arm/aspeed-g4.dtsi @@ -197,6 +197,7 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; }; timer: timer@1e782000 { diff --git a/src/arm/aspeed-g5.dtsi b/src/arm/aspeed-g5.dtsi index d107459fc0f8..85ed9dbec196 100644 --- a/src/arm/aspeed-g5.dtsi +++ b/src/arm/aspeed-g5.dtsi @@ -47,6 +47,13 @@ reg = <0x80000000 0>; }; + edac: sdram@1e6e0000 { + compatible = "aspeed,ast2500-sdram-edac"; + reg = <0x1e6e0000 0x174>; + interrupts = <0>; + status = "disabled"; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -250,6 +257,7 @@ gpio-ranges = <&pinctrl 0 0 220>; clocks = <&syscon ASPEED_CLK_APB>; interrupt-controller; + #interrupt-cells = <2>; }; timer: timer@1e782000 { @@ -330,8 +338,32 @@ ranges = <0x0 0x1e789000 0x1000>; lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc"; + compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; reg = <0x0 0x80>; + reg-io-width = <4>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80>; + + kcs1: kcs1@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <1>; + status = "disabled"; + }; + kcs2: kcs2@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <2>; + status = "disabled"; + }; + kcs3: kcs3@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <3>; + status = "disabled"; + }; }; lpc_host: lpc-host@80 { @@ -343,6 +375,13 @@ #size-cells = <1>; ranges = <0x0 0x80 0x1e0>; + kcs4: kcs4@0 { + compatible = "aspeed,ast2500-kcs-bmc"; + interrupts = <8>; + kcs_chan = <4>; + status = "disabled"; + }; + lpc_ctrl: lpc-ctrl@0 { compatible = "aspeed,ast2500-lpc-ctrl"; reg = <0x0 0x80>; diff --git a/src/arm/at91-nattis-2-natte-2.dts b/src/arm/at91-nattis-2-natte-2.dts index 0f6d335125e2..f245944bd5d7 100644 --- a/src/arm/at91-nattis-2-natte-2.dts +++ b/src/arm/at91-nattis-2-natte-2.dts @@ -22,7 +22,7 @@ wakeup { label = "Wakeup"; linux,code = <10>; - gpio-key,wakeup; + wakeup-source; gpios = <&pioB 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/src/arm/at91-sama5d27_som1.dtsi b/src/arm/at91-sama5d27_som1.dtsi index cf0087b4c9e1..33a159c0163f 100644 --- a/src/arm/at91-sama5d27_som1.dtsi +++ b/src/arm/at91-sama5d27_som1.dtsi @@ -62,6 +62,20 @@ ahb { apb { + qspi1: spi@f0024000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + }; + }; + macb0: ethernet@f8008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_default>; @@ -78,6 +92,22 @@ pinctrl@fc038000 { + pinctrl_qspi1_default: qspi1_default { + sck_cs { + pinmux = , + ; + bias-disable; + }; + + data { + pinmux = , + , + , + ; + bias-pull-up; + }; + }; + pinctrl_macb0_default: macb0_default { pinmux = , , diff --git a/src/arm/at91-sama5d27_som1_ek.dts b/src/arm/at91-sama5d27_som1_ek.dts index 4a258867ddf1..a48180555ef5 100644 --- a/src/arm/at91-sama5d27_som1_ek.dts +++ b/src/arm/at91-sama5d27_som1_ek.dts @@ -109,6 +109,10 @@ status = "okay"; }; + qspi1: spi@f0024000 { + status = "okay"; + }; + spi0: spi@f8000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0_default>; diff --git a/src/arm/at91-wb45n.dts b/src/arm/at91-wb45n.dts index 5b9512a6c89c..54d130c92185 100644 --- a/src/arm/at91-wb45n.dts +++ b/src/arm/at91-wb45n.dts @@ -22,7 +22,7 @@ label = "IRQBTN"; linux,code = <99>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; }; diff --git a/src/arm/at91-wb50n.dts b/src/arm/at91-wb50n.dts index 8cecc7051a86..a5e45bb95c04 100644 --- a/src/arm/at91-wb50n.dts +++ b/src/arm/at91-wb50n.dts @@ -23,7 +23,7 @@ label = "BTNESC"; linux,code = <1>; /* ESC button */ gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; irqbtn@31 { @@ -31,7 +31,7 @@ label = "IRQBTN"; linux,code = <99>; /* SysReq button */ gpios = <&pioE 31 GPIO_ACTIVE_LOW>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/src/arm/at91rm9200.dtsi b/src/arm/at91rm9200.dtsi index 2ad69a7fbc00..5a882a053816 100644 --- a/src/arm/at91rm9200.dtsi +++ b/src/arm/at91rm9200.dtsi @@ -10,13 +10,14 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91RM9200 family SoC"; compatible = "atmel,at91rm9200"; interrupt-parent = <&aic>; @@ -49,6 +50,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/src/arm/at91sam9260.dtsi b/src/arm/at91sam9260.dtsi index 7cd9c3bc4dfb..3b58b94b53c9 100644 --- a/src/arm/at91sam9260.dtsi +++ b/src/arm/at91sam9260.dtsi @@ -8,13 +8,14 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9260 family SoC"; compatible = "atmel,at91sam9260"; interrupt-parent = <&aic>; @@ -46,6 +47,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/src/arm/at91sam9261.dtsi b/src/arm/at91sam9261.dtsi index 01d700b63b45..a907a1fdd24c 100644 --- a/src/arm/at91sam9261.dtsi +++ b/src/arm/at91sam9261.dtsi @@ -6,13 +6,14 @@ * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9261 family SoC"; compatible = "atmel,at91sam9261"; interrupt-parent = <&aic>; @@ -43,6 +44,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/src/arm/at91sam9263.dtsi b/src/arm/at91sam9263.dtsi index c5766da4e54e..3fb63d81f18e 100644 --- a/src/arm/at91sam9263.dtsi +++ b/src/arm/at91sam9263.dtsi @@ -6,13 +6,14 @@ * Licensed under GPLv2 only. */ -#include "skeleton.dtsi" #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9263 family SoC"; compatible = "atmel,at91sam9263"; interrupt-parent = <&aic>; @@ -45,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x08000000>; }; diff --git a/src/arm/at91sam9g45.dtsi b/src/arm/at91sam9g45.dtsi index d16db1fa7e15..f36819607131 100644 --- a/src/arm/at91sam9g45.dtsi +++ b/src/arm/at91sam9g45.dtsi @@ -9,7 +9,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include @@ -17,6 +16,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9G45 family SoC"; compatible = "atmel,at91sam9g45"; interrupt-parent = <&aic>; @@ -51,6 +52,7 @@ }; memory { + device_type = "memory"; reg = <0x70000000 0x10000000>; }; diff --git a/src/arm/at91sam9n12.dtsi b/src/arm/at91sam9n12.dtsi index 37cb81f457b5..f71d65e6e510 100644 --- a/src/arm/at91sam9n12.dtsi +++ b/src/arm/at91sam9n12.dtsi @@ -7,7 +7,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include @@ -15,6 +14,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9N12 SoC"; compatible = "atmel,at91sam9n12"; interrupt-parent = <&aic>; @@ -47,6 +48,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/src/arm/at91sam9rl.dtsi b/src/arm/at91sam9rl.dtsi index 3862ff2f26e0..6b5777f3c20b 100644 --- a/src/arm/at91sam9rl.dtsi +++ b/src/arm/at91sam9rl.dtsi @@ -7,7 +7,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include @@ -15,6 +14,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9RL family SoC"; compatible = "atmel,at91sam9rl", "atmel,at91sam9"; interrupt-parent = <&aic>; @@ -48,6 +49,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x04000000>; }; diff --git a/src/arm/at91sam9x5.dtsi b/src/arm/at91sam9x5.dtsi index 07443a387a8f..79c4956d3902 100644 --- a/src/arm/at91sam9x5.dtsi +++ b/src/arm/at91sam9x5.dtsi @@ -9,7 +9,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include @@ -17,6 +16,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel AT91SAM9x5 family SoC"; compatible = "atmel,at91sam9x5"; interrupt-parent = <&aic>; @@ -49,6 +50,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x10000000>; }; diff --git a/src/arm/atlas6-evb.dts b/src/arm/atlas6-evb.dts index ab042ca8dea1..40882419309d 100644 --- a/src/arm/atlas6-evb.dts +++ b/src/arm/atlas6-evb.dts @@ -15,6 +15,7 @@ compatible = "sirf,atlas6-cb", "sirf,atlas6"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/src/arm/atlas6.dtsi b/src/arm/atlas6.dtsi index 29598667420b..5587b98032a3 100644 --- a/src/arm/atlas6.dtsi +++ b/src/arm/atlas6.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas6"; #address-cells = <1>; diff --git a/src/arm/atlas7.dtsi b/src/arm/atlas7.dtsi index 83449b33de6b..f3de9af35b4d 100644 --- a/src/arm/atlas7.dtsi +++ b/src/arm/atlas7.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,atlas7"; #address-cells = <1>; diff --git a/src/arm/axm55xx.dtsi b/src/arm/axm55xx.dtsi index 47799f59faa5..2a93d3ee3b66 100644 --- a/src/arm/axm55xx.dtsi +++ b/src/arm/axm55xx.dtsi @@ -12,9 +12,9 @@ #include #include -#include "skeleton64.dtsi" - / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; aliases { diff --git a/src/arm/bcm-cygnus.dtsi b/src/arm/bcm-cygnus.dtsi index 253df7170a4e..5f7b46503a51 100644 --- a/src/arm/bcm-cygnus.dtsi +++ b/src/arm/bcm-cygnus.dtsi @@ -34,9 +34,9 @@ #include #include -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,cygnus"; model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; @@ -45,6 +45,11 @@ ethernet0 = ð0; }; + memory { + device_type = "memory"; + reg = <0 0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/src/arm/bcm-nsp.dtsi b/src/arm/bcm-nsp.dtsi index 0d2538b46139..6925b30c2253 100644 --- a/src/arm/bcm-nsp.dtsi +++ b/src/arm/bcm-nsp.dtsi @@ -34,9 +34,9 @@ #include #include -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,nsp"; model = "Broadcom Northstar Plus SoC"; interrupt-parent = <&gic>; diff --git a/src/arm/bcm11351.dtsi b/src/arm/bcm11351.dtsi index db7cded1b7ad..b99c2e579622 100644 --- a/src/arm/bcm11351.dtsi +++ b/src/arm/bcm11351.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm281xx.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM11351 SoC"; compatible = "brcm,bcm11351"; interrupt-parent = <&gic>; diff --git a/src/arm/bcm21664-garnet.dts b/src/arm/bcm21664-garnet.dts index e87cb26ddf84..8b045cfab64b 100644 --- a/src/arm/bcm21664-garnet.dts +++ b/src/arm/bcm21664-garnet.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi index 266f2611dc22..758daa334148 100644 --- a/src/arm/bcm21664.dtsi +++ b/src/arm/bcm21664.dtsi @@ -16,9 +16,9 @@ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM21664 SoC"; compatible = "brcm,bcm21664"; interrupt-parent = <&gic>; diff --git a/src/arm/bcm23550-sparrow.dts b/src/arm/bcm23550-sparrow.dts index 4d525ccb48c8..1c66b15f3013 100644 --- a/src/arm/bcm23550-sparrow.dts +++ b/src/arm/bcm23550-sparrow.dts @@ -46,6 +46,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; }; diff --git a/src/arm/bcm23550.dtsi b/src/arm/bcm23550.dtsi index a7a643f38385..701198f5f498 100644 --- a/src/arm/bcm23550.dtsi +++ b/src/arm/bcm23550.dtsi @@ -36,9 +36,9 @@ /* BCM23550 and BCM21664 have almost identical clocks */ #include "dt-bindings/clock/bcm21664.h" -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; model = "BCM23550 SoC"; compatible = "brcm,bcm23550"; interrupt-parent = <&gic>; diff --git a/src/arm/bcm28155-ap.dts b/src/arm/bcm28155-ap.dts index 9ce91dd60cb6..fbfca83bd28f 100644 --- a/src/arm/bcm28155-ap.dts +++ b/src/arm/bcm28155-ap.dts @@ -22,6 +22,7 @@ compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/src/arm/bcm2835-rpi-a-plus.dts b/src/arm/bcm2835-rpi-a-plus.dts index 2cd9c5e4f892..db8a6017f220 100644 --- a/src/arm/bcm2835-rpi-a-plus.dts +++ b/src/arm/bcm2835-rpi-a-plus.dts @@ -31,8 +31,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/src/arm/bcm2835-rpi-b-plus.dts b/src/arm/bcm2835-rpi-b-plus.dts index cfbdaacbaeba..1e40d672b055 100644 --- a/src/arm/bcm2835-rpi-b-plus.dts +++ b/src/arm/bcm2835-rpi-b-plus.dts @@ -33,8 +33,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/src/arm/bcm2835-rpi-b-rev2.dts b/src/arm/bcm2835-rpi-b-rev2.dts index 5641d162dfdb..28e7513ce617 100644 --- a/src/arm/bcm2835-rpi-b-rev2.dts +++ b/src/arm/bcm2835-rpi-b-rev2.dts @@ -93,7 +93,7 @@ }; &hdmi { - hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; }; &pwm { diff --git a/src/arm/bcm2835-rpi-zero-w.dts b/src/arm/bcm2835-rpi-zero-w.dts index 644d907bafbb..ba0167df6c5f 100644 --- a/src/arm/bcm2835-rpi-zero-w.dts +++ b/src/arm/bcm2835-rpi-zero-w.dts @@ -25,8 +25,6 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wl_on>; reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; }; }; @@ -40,8 +38,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "GPIO0", - "GPIO1", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", @@ -98,11 +96,6 @@ "SD_DATA3_R"; pinctrl-0 = <&gpioout &alt0>; - - wl_on: wl-on { - brcm,pins = <41>; - brcm,function = ; - }; }; &hdmi { diff --git a/src/arm/bcm2835-rpi-zero.dts b/src/arm/bcm2835-rpi-zero.dts index 00323ba8f7de..3b35a8a4a55f 100644 --- a/src/arm/bcm2835-rpi-zero.dts +++ b/src/arm/bcm2835-rpi-zero.dts @@ -28,8 +28,8 @@ * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ - gpio-line-names = "SDA0", - "SCL0", + gpio-line-names = "ID_SDA", + "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", diff --git a/src/arm/bcm2835-rpi.dtsi b/src/arm/bcm2835-rpi.dtsi index 29f970f864dc..715d50c64529 100644 --- a/src/arm/bcm2835-rpi.dtsi +++ b/src/arm/bcm2835-rpi.dtsi @@ -1,7 +1,7 @@ #include / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x10000000>; }; @@ -19,8 +19,6 @@ soc { firmware: firmware { compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; - #address-cells = <0>; - #size-cells = <0>; mboxes = <&mailbox>; }; @@ -87,10 +85,6 @@ power-domains = <&power RPI_POWER_DOMAIN_USB>; }; -&v3d { - power-domains = <&power RPI_POWER_DOMAIN_V3D>; -}; - &hdmi { power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; diff --git a/src/arm/bcm2836-rpi-2-b.dts b/src/arm/bcm2836-rpi-2-b.dts index ac4408b34b58..7b4e651bafdd 100644 --- a/src/arm/bcm2836-rpi-2-b.dts +++ b/src/arm/bcm2836-rpi-2-b.dts @@ -9,7 +9,7 @@ compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; model = "Raspberry Pi 2 Model B"; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -28,6 +28,72 @@ }; &gpio { + /* + * Taken from rpi_SCH_2b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "", /* GPIO30 */ + "LAN_RUN", + "CAM_GPIO1", + "", /* GPIO33 */ + "", /* GPIO34 */ + "PWR_LOW_N", + "", /* GPIO36 */ + "", /* GPIO37 */ + "USB_LIMIT", + "", /* GPIO39 */ + "PWM0_OUT", + "CAM_GPIO0", + "SMPS_SCL", + "SMPS_SDA", + "ETHCLK", + "PWM1_OUT", + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/src/arm/bcm2837-rpi-3-a-plus.dts b/src/arm/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 000000000000..7f4437a8eedb --- /dev/null +++ b/src/arm/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2836-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837"; + model = "Raspberry Pi 3 Model A+"; + + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + + memory@0 { + reg = <0 0x20000000>; + }; + + leds { + act { + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "PWR"; + gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", + "BT_WL_ON", + "STATUS_LED_R", + "", + "", + "CAM_GPIO0", + "CAM_GPIO1", + ""; + status = "okay"; + }; +}; + +&gpio { + /* + * This is mostly based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "", /* GPIO42 */ + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + +&hdmi { + hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; + status = "okay"; +}; + +/* + * SDHCI is used to control the SDIO for wireless + * + * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven + * by a single GPIO. We can't give GPIO control to one of the drivers, + * otherwise the other part would get unexpectedly disturbed. + */ +&sdhci { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; + +/* uart0 communicates with the BT module */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <2000000>; + }; +}; + +/* uart1 is mapped to the pin header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_gpio14>; + status = "okay"; +}; diff --git a/src/arm/bcm2837-rpi-3-b-plus.dts b/src/arm/bcm2837-rpi-3-b-plus.dts index 42bb09044cc7..c6fa34c24100 100644 --- a/src/arm/bcm2837-rpi-3-b-plus.dts +++ b/src/arm/bcm2837-rpi-3-b-plus.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -42,7 +42,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED", + "STATUS_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -52,6 +52,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "HDMI_HPD_N", + "STATUS_LED_G", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &hdmi { hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>; }; diff --git a/src/arm/bcm2837-rpi-3-b.dts b/src/arm/bcm2837-rpi-3-b.dts index 0c155dd4f396..ce71f578c51a 100644 --- a/src/arm/bcm2837-rpi-3-b.dts +++ b/src/arm/bcm2837-rpi-3-b.dts @@ -14,7 +14,7 @@ stdout-path = "serial1:115200n8"; }; - memory { + memory@0 { reg = <0 0x40000000>; }; @@ -39,7 +39,7 @@ "WL_ON", "STATUS_LED", "LAN_RUN", - "HPD_N", + "HDMI_HPD_N", "CAM_GPIO0", "CAM_GPIO1", "PWR_LOW_N"; @@ -47,6 +47,76 @@ }; }; +&gpio { + /* + * Taken from rpi_SCH_3b_1p2_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "", /* GPIO 28 */ + "LAN_RUN_BOOT", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + "PWM0_OUT", + "PWM1_OUT", + "ETHCLK", + "WIFI_CLK", + "SDA0", + "SCL0", + "SMPS_SCL", + "SMPS_SDA", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; diff --git a/src/arm/bcm2837-rpi-cm3.dtsi b/src/arm/bcm2837-rpi-cm3.dtsi index 4a89a1885a3d..81399b2c5af9 100644 --- a/src/arm/bcm2837-rpi-cm3.dtsi +++ b/src/arm/bcm2837-rpi-cm3.dtsi @@ -4,7 +4,7 @@ #include "bcm2836-rpi.dtsi" / { - memory { + memory@0 { reg = <0 0x40000000>; }; diff --git a/src/arm/bcm283x.dtsi b/src/arm/bcm283x.dtsi index 31b29646b14c..9777644c6c2b 100644 --- a/src/arm/bcm283x.dtsi +++ b/src/arm/bcm283x.dtsi @@ -3,6 +3,7 @@ #include #include #include +#include /* firmware-provided startup stubs live here, where the secondary CPUs are * spinning. @@ -120,9 +121,18 @@ #interrupt-cells = <2>; }; - watchdog@7e100000 { - compatible = "brcm,bcm2835-pm-wdt"; - reg = <0x7e100000 0x28>; + pm: watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; }; clocks: cprman@7e101000 { @@ -629,6 +639,7 @@ compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; interrupts = <1 10>; + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; }; vc4: gpu { diff --git a/src/arm/bcm47081-asus-rt-n18u.dts b/src/arm/bcm47081-asus-rt-n18u.dts index 76a2bab3bc6f..fe842f2f1ca7 100644 --- a/src/arm/bcm47081-asus-rt-n18u.dts +++ b/src/arm/bcm47081-asus-rt-n18u.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/src/arm/bcm47081-buffalo-wzr-600dhp2.dts index 69e3570e03dd..6fcbb0509ba0 100644 --- a/src/arm/bcm47081-buffalo-wzr-600dhp2.dts +++ b/src/arm/bcm47081-buffalo-wzr-600dhp2.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/src/arm/bcm47081-buffalo-wzr-900dhp.dts index 0f6f0fe13bfb..b3e8cc90b13f 100644 --- a/src/arm/bcm47081-buffalo-wzr-900dhp.dts +++ b/src/arm/bcm47081-buffalo-wzr-900dhp.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47081-luxul-xap-1410.dts b/src/arm/bcm47081-luxul-xap-1410.dts index f77089744996..fdeaa895512f 100644 --- a/src/arm/bcm47081-luxul-xap-1410.dts +++ b/src/arm/bcm47081-luxul-xap-1410.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47081-luxul-xwr-1200.dts b/src/arm/bcm47081-luxul-xwr-1200.dts index 4d427863756f..0d510cb15ec3 100644 --- a/src/arm/bcm47081-luxul-xwr-1200.dts +++ b/src/arm/bcm47081-luxul-xwr-1200.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47081-tplink-archer-c5-v2.dts b/src/arm/bcm47081-tplink-archer-c5-v2.dts index 189cc3dcd6ef..962e89edba11 100644 --- a/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47094-dlink-dir-885l.dts b/src/arm/bcm47094-dlink-dir-885l.dts index 03c1ab188576..658a56ff8a5c 100644 --- a/src/arm/bcm47094-dlink-dir-885l.dts +++ b/src/arm/bcm47094-dlink-dir-885l.dts @@ -20,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47094-linksys-panamera.dts b/src/arm/bcm47094-linksys-panamera.dts index 36efe410dcd7..5fd47eec4407 100644 --- a/src/arm/bcm47094-linksys-panamera.dts +++ b/src/arm/bcm47094-linksys-panamera.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47094-luxul-abr-4500.dts b/src/arm/bcm47094-luxul-abr-4500.dts index 3e5e9972cd97..6604be6ff0a0 100644 --- a/src/arm/bcm47094-luxul-abr-4500.dts +++ b/src/arm/bcm47094-luxul-abr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/src/arm/bcm47094-luxul-xap-1610.dts b/src/arm/bcm47094-luxul-xap-1610.dts index 7fd85475893d..567ebbd5a0e9 100644 --- a/src/arm/bcm47094-luxul-xap-1610.dts +++ b/src/arm/bcm47094-luxul-xap-1610.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47094-luxul-xbr-4500.dts b/src/arm/bcm47094-luxul-xbr-4500.dts index 7acbecd42950..ac2d136ed334 100644 --- a/src/arm/bcm47094-luxul-xbr-4500.dts +++ b/src/arm/bcm47094-luxul-xbr-4500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/src/arm/bcm47094-luxul-xwr-3100.dts b/src/arm/bcm47094-luxul-xwr-3100.dts index f4558d9d2769..74371e821b1a 100644 --- a/src/arm/bcm47094-luxul-xwr-3100.dts +++ b/src/arm/bcm47094-luxul-xwr-3100.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; }; diff --git a/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/src/arm/bcm47094-luxul-xwr-3150-v1.dts index bdad7267255a..b44af63ee310 100644 --- a/src/arm/bcm47094-luxul-xwr-3150-v1.dts +++ b/src/arm/bcm47094-luxul-xwr-3150-v1.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/src/arm/bcm47094-netgear-r8500.dts b/src/arm/bcm47094-netgear-r8500.dts index 30719380b6c0..eebc0d43e220 100644 --- a/src/arm/bcm47094-netgear-r8500.dts +++ b/src/arm/bcm47094-netgear-r8500.dts @@ -17,6 +17,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; }; diff --git a/src/arm/bcm47094-phicomm-k3.dts b/src/arm/bcm47094-phicomm-k3.dts new file mode 100644 index 000000000000..ec09c0426d16 --- /dev/null +++ b/src/arm/bcm47094-phicomm-k3.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2017 Hamster Tian + * Copyright (C) 2019 Hao Dong + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; + model = "Phicomm K3"; + + memory { + reg = <0x00000000 0x08000000 + 0x88000000 0x18000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0000000 0x0080000>; + read-only; + }; + + partition@80000 { + label = "nvram"; + reg = <0x0080000 0x0100000>; + }; + + partition@180000{ + label = "phicomm"; + reg = <0x0180000 0x0280000>; + read-only; + }; + + partition@400000 { + label = "firmware"; + reg = <0x0400000 0x7C00000>; + compatible = "brcm,trx"; + }; + }; +}; diff --git a/src/arm/bcm47189-luxul-xap-1440.dts b/src/arm/bcm47189-luxul-xap-1440.dts index 74c83b0ca54e..eb59508578e4 100644 --- a/src/arm/bcm47189-luxul-xap-1440.dts +++ b/src/arm/bcm47189-luxul-xap-1440.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47189-luxul-xap-810.dts b/src/arm/bcm47189-luxul-xap-810.dts index 214df18f3a75..4c71f5e95e00 100644 --- a/src/arm/bcm47189-luxul-xap-810.dts +++ b/src/arm/bcm47189-luxul-xap-810.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2017 Luxul Inc. - * - * Licensed under the ISC license. */ /dts-v1/; @@ -17,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm47189-tenda-ac9.dts b/src/arm/bcm47189-tenda-ac9.dts index e15e2a1e9d8c..5ad53ea52d0a 100644 --- a/src/arm/bcm47189-tenda-ac9.dts +++ b/src/arm/bcm47189-tenda-ac9.dts @@ -16,6 +16,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi index fd7af943fb0b..ac5266ee8d4c 100644 --- a/src/arm/bcm5301x.dtsi +++ b/src/arm/bcm5301x.dtsi @@ -13,9 +13,10 @@ #include #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; chipcommonA { diff --git a/src/arm/bcm53340-ubnt-unifi-switch8.dts b/src/arm/bcm53340-ubnt-unifi-switch8.dts index 431cda514230..2e7fda9b998c 100644 --- a/src/arm/bcm53340-ubnt-unifi-switch8.dts +++ b/src/arm/bcm53340-ubnt-unifi-switch8.dts @@ -20,6 +20,7 @@ }; memory@0 { + device_type = "memory"; reg = <0x00000000 0x08000000>, <0x68000000 0x08000000>; }; diff --git a/src/arm/bcm53573.dtsi b/src/arm/bcm53573.dtsi index 5054fa9eb0d0..b29695bd4855 100644 --- a/src/arm/bcm53573.dtsi +++ b/src/arm/bcm53573.dtsi @@ -7,9 +7,10 @@ #include #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; aliases { diff --git a/src/arm/bcm63138.dtsi b/src/arm/bcm63138.dtsi index f59764008b9c..e6a41e1b27fd 100644 --- a/src/arm/bcm63138.dtsi +++ b/src/arm/bcm63138.dtsi @@ -6,9 +6,9 @@ #include #include -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "brcm,bcm63138"; model = "Broadcom BCM63138 DSL SoC"; interrupt-parent = <&gic>; diff --git a/src/arm/bcm7445.dtsi b/src/arm/bcm7445.dtsi index c859aa6f358c..504a63236a5e 100644 --- a/src/arm/bcm7445.dtsi +++ b/src/arm/bcm7445.dtsi @@ -1,8 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include -#include "skeleton.dtsi" - / { #address-cells = <2>; #size-cells = <2>; diff --git a/src/arm/bcm947189acdbmr.dts b/src/arm/bcm947189acdbmr.dts index ef263412fea5..4991700ae6b0 100644 --- a/src/arm/bcm947189acdbmr.dts +++ b/src/arm/bcm947189acdbmr.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/bcm953012er.dts b/src/arm/bcm953012er.dts index 17f63c7a0437..250a1d6f2d05 100644 --- a/src/arm/bcm953012er.dts +++ b/src/arm/bcm953012er.dts @@ -40,6 +40,7 @@ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; }; diff --git a/src/arm/bcm953012hr.dts b/src/arm/bcm953012hr.dts index 11b0f5ed99e6..9140be7ec053 100644 --- a/src/arm/bcm953012hr.dts +++ b/src/arm/bcm953012hr.dts @@ -46,6 +46,7 @@ }; memory@80000000 { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/src/arm/bcm953012k.dts b/src/arm/bcm953012k.dts index e798055d6989..52c4c6c9d3f1 100644 --- a/src/arm/bcm953012k.dts +++ b/src/arm/bcm953012k.dts @@ -44,6 +44,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x10000000>; }; }; diff --git a/src/arm/cx92755.dtsi b/src/arm/cx92755.dtsi index a5a23c376418..d2e8f36f8c60 100644 --- a/src/arm/cx92755.dtsi +++ b/src/arm/cx92755.dtsi @@ -44,9 +44,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "cnxt,cx92755"; interrupt-parent = <&intc>; diff --git a/src/arm/da850-lcdk.dts b/src/arm/da850-lcdk.dts index 3a2fa6e035a3..26f453dc8370 100644 --- a/src/arm/da850-lcdk.dts +++ b/src/arm/da850-lcdk.dts @@ -74,12 +74,16 @@ simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", - "Line", "Line Out"; + "Line", "Line Out", + "Microphone", "Mic Jack"; simple-audio-card,routing = "LINE1L", "Line In", "LINE1R", "Line In", "Line Out", "LLOUT", - "Line Out", "RLOUT"; + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&link0_codec>; simple-audio-card,frame-master = <&link0_codec>; @@ -250,6 +254,8 @@ #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x18>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ status = "okay"; /* Regulators */ diff --git a/src/arm/dm814x.dtsi b/src/arm/dm814x.dtsi index 601c57afd4fe..95de9f214c14 100644 --- a/src/arm/dm814x.dtsi +++ b/src/arm/dm814x.dtsi @@ -222,6 +222,30 @@ #interrupt-cells = <2>; }; + gpio3: gpio@1ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + reg = <0x1ac000 0x2000>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@1ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + reg = <0x1ae000 0x2000>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + i2c2: i2c@2a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; @@ -240,10 +264,48 @@ ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; dmas = <&edma 16 0 &edma 17 0 - &edma 18 0 &edma 19 0>; + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; + + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@1a0000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <125>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi2"; + dmas = <&edma 42 0 &edma 43 0 + &edma 44 0 &edma 45 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; }; + /* Board must configure dmas with edma_xbar for EDMA */ + mcspi3: spi@1a2000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a2000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <126>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi3"; + }; + + mcspi4: spi@1a4000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <127>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi4"; + }; + timer1: timer@2e000 { compatible = "ti,dm814-timer"; reg = <0x2e000 0x2000>; @@ -343,6 +405,12 @@ #size-cells = <1>; ranges = <0 0 0x800>; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dm814-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <1>; + }; + scm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; @@ -549,17 +617,14 @@ cpsw_emac0: slave@4a100200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; cpsw_emac1: slave@4a100300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; - }; - - phy_sel: cpsw-phy-sel@48140650 { - compatible = "ti,am3352-cpsw-phy-sel"; - reg= <0x48140650 0x4>; - reg-names = "gmii-sel"; + phys = <&phy_gmii_sel 2>; }; }; diff --git a/src/arm/dove.dtsi b/src/arm/dove.dtsi index 250ad0535e8c..2e8a3977219f 100644 --- a/src/arm/dove.dtsi +++ b/src/arm/dove.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" - #include #include #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; interrupt-parent = <&intc>; diff --git a/src/arm/dra7-l4.dtsi b/src/arm/dra7-l4.dtsi index bb45cb7fc3b6..414f1cd68733 100644 --- a/src/arm/dra7-l4.dtsi +++ b/src/arm/dra7-l4.dtsi @@ -77,18 +77,18 @@ }; }; + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dra7xx-phy-gmii-sel"; + reg = <0x554 0x4>; + #phy-cells = <1>; + }; + scm_conf_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; }; - phy_sel: cpsw-phy-sel@554 { - compatible = "ti,dra7xx-cpsw-phy-sel"; - reg= <0x554 0x4>; - reg-names = "gmii-sel"; - }; - dra7_pmx_core: pinmux@1400 { compatible = "ti,dra7-padconf", "pinctrl-single"; @@ -3099,7 +3099,6 @@ ; ranges = <0 0 0x4000>; syscon = <&scm_conf>; - cpsw-phy-sel = <&phy_sel>; status = "disabled"; davinci_mdio: mdio@1000 { @@ -3114,11 +3113,13 @@ cpsw_emac0: slave@200 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; }; cpsw_emac1: slave@300 { /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; }; }; }; diff --git a/src/arm/ep7209.dtsi b/src/arm/ep7209.dtsi index aaf1261d2ee4..0e74222a5eae 100644 --- a/src/arm/ep7209.dtsi +++ b/src/arm/ep7209.dtsi @@ -6,11 +6,11 @@ /dts-v1/; -#include "skeleton.dtsi" - #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Cirrus Logic EP7209"; compatible = "cirrus,ep7209"; diff --git a/src/arm/ep7211-edb7211.dts b/src/arm/ep7211-edb7211.dts index bc9d5b697452..3475c7777cbc 100644 --- a/src/arm/ep7211-edb7211.dts +++ b/src/arm/ep7211-edb7211.dts @@ -12,6 +12,7 @@ compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; memory { + device_type = "memory"; reg = <0xc0000000 0x02000000>; }; diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi index 608d17454179..5892a9f7622f 100644 --- a/src/arm/exynos3250.dtsi +++ b/src/arm/exynos3250.dtsi @@ -168,6 +168,9 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + clock-names = "clkout8"; + clocks = <&cmu CLK_FIN_PLL>; + #clock-cells = <1>; }; mipi_phy: video-phy { diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi index 3a9eb1e91c45..08d3a0a7b4eb 100644 --- a/src/arm/exynos4412-odroid-common.dtsi +++ b/src/arm/exynos4412-odroid-common.dtsi @@ -49,7 +49,7 @@ }; emmc_pwrseq: pwrseq { - pinctrl-0 = <&sd1_cd>; + pinctrl-0 = <&emmc_rstn>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; @@ -165,12 +165,6 @@ cpu0-supply = <&buck2_reg>; }; -/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = ; - samsung,pin-drv = ; -}; - &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; @@ -188,6 +182,11 @@ samsung,pins = "gpx3-7"; samsung,pin-pud = ; }; + + emmc_rstn: emmc-rstn { + samsung,pins = "gpk1-2"; + samsung,pin-pud = ; + }; }; &ehci { @@ -390,7 +389,6 @@ regulator-name = "LDO20_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-boot-on; }; ldo21_reg: LDO21 { diff --git a/src/arm/exynos4412-odroidx.dts b/src/arm/exynos4412-odroidx.dts index 348556fcdd9d..a2251581f6b6 100644 --- a/src/arm/exynos4412-odroidx.dts +++ b/src/arm/exynos4412-odroidx.dts @@ -53,7 +53,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; diff --git a/src/arm/exynos5250-arndale.dts b/src/arm/exynos5250-arndale.dts index 2ca9319f48f2..dc6fa6fe83f1 100644 --- a/src/arm/exynos5250-arndale.dts +++ b/src/arm/exynos5250-arndale.dts @@ -23,7 +23,7 @@ }; chosen { - bootargs = "console=ttySAC2,115200"; + stdout-path = "serial2:115200n8"; }; gpio_keys { @@ -100,7 +100,7 @@ regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_LOW>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/src/arm/exynos5422-odroid-core.dtsi b/src/arm/exynos5422-odroid-core.dtsi index bf09eab90f8a..25d95de15c9b 100644 --- a/src/arm/exynos5422-odroid-core.dtsi +++ b/src/arm/exynos5422-odroid-core.dtsi @@ -36,6 +36,11 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + &bus_wcore { devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; @@ -468,7 +473,7 @@ buck8_reg: BUCK8 { regulator-name = "vdd_1.8v_ldo"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; regulator-always-on; regulator-boot-on; }; diff --git a/src/arm/exynos5422-odroidxu3-audio.dtsi b/src/arm/exynos5422-odroidxu3-audio.dtsi index e84544b220b9..51a843bd65ed 100644 --- a/src/arm/exynos5422-odroidxu3-audio.dtsi +++ b/src/arm/exynos5422-odroidxu3-audio.dtsi @@ -24,7 +24,9 @@ "Headphone Jack", "MICBIAS", "IN1", "Headphone Jack", "Speakers", "SPKL", - "Speakers", "SPKR"; + "Speakers", "SPKR", + "I2S Playback", "Mixer DAI TX", + "HiFi Playback", "Mixer DAI TX"; assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, @@ -51,7 +53,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { sound-dai = <&hdmi>, <&max98090>; diff --git a/src/arm/exynos5422-odroidxu3-common.dtsi b/src/arm/exynos5422-odroidxu3-common.dtsi index b299e541cac0..5f195ad7e467 100644 --- a/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/src/arm/exynos5422-odroidxu3-common.dtsi @@ -362,11 +362,6 @@ }; }; -&adc { - vdd-supply = <&ldo4_reg>; - status = "okay"; -}; - &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/src/arm/exynos5422-odroidxu3-lite.dts b/src/arm/exynos5422-odroidxu3-lite.dts index 0db935f2b836..c19b5a51ca44 100644 --- a/src/arm/exynos5422-odroidxu3-lite.dts +++ b/src/arm/exynos5422-odroidxu3-lite.dts @@ -18,6 +18,14 @@ compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; }; +&arm_a7_pmu { + status = "disabled"; +}; + +&arm_a15_pmu { + status = "disabled"; +}; + &pwm { /* * PWM 0 -- fan diff --git a/src/arm/exynos5422-odroidxu4.dts b/src/arm/exynos5422-odroidxu4.dts index 122174ea9e0a..892d389d6d09 100644 --- a/src/arm/exynos5422-odroidxu4.dts +++ b/src/arm/exynos5422-odroidxu4.dts @@ -33,6 +33,8 @@ compatible = "samsung,odroid-xu3-audio"; model = "Odroid-XU4"; + samsung,audio-routing = "I2S Playback", "Mixer DAI TX"; + assigned-clocks = <&clock CLK_MOUT_EPLL>, <&clock CLK_MOUT_MAU_EPLL>, <&clock CLK_MOUT_USER_MAU_EPLL>, @@ -58,7 +60,7 @@ <196608000>; cpu { - sound-dai = <&i2s0 0>; + sound-dai = <&i2s0 0>, <&i2s0 1>; }; codec { diff --git a/src/arm/imx27.dtsi b/src/arm/imx27.dtsi index 26ff5d419bfc..3652f5556b29 100644 --- a/src/arm/imx27.dtsi +++ b/src/arm/imx27.dtsi @@ -40,7 +40,7 @@ spi2 = &cspi3; }; - aitc: aitc-interrupt-controller@e0000000 { + aitc: aitc-interrupt-controller@10040000 { compatible = "fsl,imx27-aitc", "fsl,avic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/src/arm/imx28-cfa10036.dts b/src/arm/imx28-cfa10036.dts index d3e3622979c5..de48b5808ef6 100644 --- a/src/arm/imx28-cfa10036.dts +++ b/src/arm/imx28-cfa10036.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "imx28.dtsi" +#include / { model = "Crystalfontz CFA-10036 Board"; @@ -96,7 +97,7 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd1306_cfa10036>; reg = <0x3c>; - reset-gpios = <&gpio2 7 0>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; diff --git a/src/arm/imx51-digi-connectcore-jsk.dts b/src/arm/imx51-digi-connectcore-jsk.dts index 2967a748d859..a2eea58510dc 100644 --- a/src/arm/imx51-digi-connectcore-jsk.dts +++ b/src/arm/imx51-digi-connectcore-jsk.dts @@ -21,12 +21,28 @@ }; }; +&esdhc1 { + status = "okay"; +}; + &owire { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_owire>; status = "okay"; }; +&pmic { + fsl,mc13xxx-uses-rtc; + + regulators { + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/src/arm/imx51-digi-connectcore-som.dtsi b/src/arm/imx51-digi-connectcore-som.dtsi index 82d8df097ef1..d90ba5fe4f1b 100644 --- a/src/arm/imx51-digi-connectcore-som.dtsi +++ b/src/arm/imx51-digi-connectcore-som.dtsi @@ -37,7 +37,6 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1 { @@ -142,16 +141,17 @@ pwgt2spi_reg: pwgt2spi { regulator-always-on; }; - - vcoincell_reg: vcoincell { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; }; }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + max-frequency = <50000000>; + bus-width = <1>; +}; + &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; @@ -174,9 +174,12 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; clock-frequency = <400000>; + scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; status = "okay"; mma7455l@1d { @@ -241,6 +244,14 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CLK__SD1_CLK 0x400021d5 + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x400020d5 + >; + }; + pinctrl_esdhc2: esdhc2grp { fsl,pins = < MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 @@ -282,6 +293,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX51_PAD_GPIO1_2__GPIO1_2 0x400001ed + MX51_PAD_GPIO1_3__GPIO1_3 0x400001ed + >; + }; + pinctrl_nfc: nfcgrp { fsl,pins = < MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 diff --git a/src/arm/imx6-logicpd-baseboard.dtsi b/src/arm/imx6-logicpd-baseboard.dtsi new file mode 100644 index 000000000000..fb01fa6e4224 --- /dev/null +++ b/src/arm/imx6-logicpd-baseboard.dtsi @@ -0,0 +1,555 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/ { + keyboard { + compatible = "gpio-keys"; + + btn0 { + gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>; + label = "btn0"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + btn1 { + gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>; + label = "btn1"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + btn2 { + gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>; + label = "btn2"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + btn3 { + gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>; + label = "btn3"; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + }; + + leds { + compatible = "gpio-leds"; + + gen-led0 { + label = "led0"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led0>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + gen-led1 { + label = "led1"; + gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>; + }; + + gen-led2 { + label = "led2"; + gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + gen-led3 { + label = "led3"; + gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + reg_usb_otg_vbus: regulator-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3v3: regulator-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_3v3>; + compatible = "regulator-fixed"; + regulator-name = "reg_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet: regulator-ethernet { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_enet>; + compatible = "regulator-fixed"; + regulator-name = "ethernet-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&sw4_reg>; + }; + + reg_audio: regulator-audio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_audio>; + compatible = "regulator-fixed"; + regulator-name = "3v3_aud"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_hdmi: regulator-hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_hdmi>; + compatible = "regulator-fixed"; + regulator-name = "hdmi-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3>; + }; + + reg_uart3: regulator-uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_uart3>; + compatible = "regulator-fixed"; + regulator-name = "uart3-supply"; + gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_1v8: regulator-1v8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_1v8>; + compatible = "regulator-fixed"; + regulator-name = "1v8-supply"; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_pcie>; + regulator-name = "mpcie_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mipi: regulator-mipi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_mipi>; + regulator-name = "mipi_pwr_en"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&wm8962>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + phy-supply = <®_enet>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + wm8962: audio-codec@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 3:Default */ + 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 5:Default */ + >; + }; +}; + +&i2c3 { + ov5640: camera@10 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x10>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_mipi>; + AVDD-supply = <®_mipi>; + DVDD-supply = <®_mipi>; + reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + pcf8575: gpio@20 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcf8574>; + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + lines-initial-states = <0x0710>; + wakeup-source; + }; +}; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&ssi2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_3v3>; + no-1-8-v; + keep-power-in-suspend; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* ENET_INT */ + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1b0b0 /* ETHR_nRST */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_led0: led0grp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b1 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b1 + >; + }; + + pinctrl_pcf8574: pcf8575grp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_1v8: reg1v8grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + + pinctrl_reg_3v3: reg3v3grp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 + >; + }; + + pinctrl_reg_audio: reg-audiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_reg_enet: reg-enetgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + >; + }; + + pinctrl_reg_hdmi: reg-hdmigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + >; + }; + + pinctrl_reg_mipi: reg-mipigrp { + fsl,pins = ; + }; + + pinctrl_reg_pcie: reg-pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_reg_uart3: reguart3grp { + fsl,pins = < + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + >; + }; + + pinctrl_reg_usb_h1_vbus: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_reg_usb_otg: reg-usb-otggrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0xd17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10069 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17069 + >; + }; + + pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + +}; diff --git a/src/arm/imx6-logicpd-som.dtsi b/src/arm/imx6-logicpd-som.dtsi new file mode 100644 index 000000000000..7ceae3573248 --- /dev/null +++ b/src/arm/imx6-logicpd-som.dtsi @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; + + reg_wl18xx_vmmc: regulator-wl18xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1837"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddcore"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vddsoc"; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_3v3"; + regulator-boot-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3a_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-name = "sw3b_vddr"; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "gen_rgmii"; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-name = "gen_5v0"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "gen_vsns"; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "gen_1v5"; + }; + + vgen2_reg: vgen2 { + regulator-name = "vgen2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-name = "gen_vadj_0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-name = "gen_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-name = "gen_vadj_1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-name = "gen_2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + coin_reg: coin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp102"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x52>; + }; +}; + +/* Reroute power feeding the CPU to come from the external PMIC */ +®_arm +{ + vin-supply = <&sw1a_reg>; +}; + +®_soc +{ + vin-supply = <&sw1c_reg>; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_gpmi_nand: gpmi-nandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < /* Enable ARM Debugger */ + MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */ + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */ + >; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wl18xx_vmmc>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; diff --git a/src/arm/imx6dl-colibri-eval-v3.dts b/src/arm/imx6dl-colibri-eval-v3.dts index d5f7a1703aae..9a5d6c94cca4 100644 --- a/src/arm/imx6dl-colibri-eval-v3.dts +++ b/src/arm/imx6dl-colibri-eval-v3.dts @@ -228,10 +228,11 @@ &weim { status = "okay"; - /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + /* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */ ranges = <0 0 0x08000000 0x02000000 1 0 0x0a000000 0x02000000 - 2 0 0x0c000000 0x02000000>; + 2 0 0x0c000000 0x02000000 + 3 0 0x0e000000 0x02000000>; /* SRAM on Colibri nEXT_CS0 */ sram@0,0 { diff --git a/src/arm/imx6dl-yapp4-common.dtsi b/src/arm/imx6dl-yapp4-common.dtsi new file mode 100644 index 000000000000..e8d800fec637 --- /dev/null +++ b/src/arm/imx6dl-yapp4-common.dtsi @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +#include +#include +#include + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "okay"; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-reset-duration = <20>; + phy-supply = <&sw2_reg>; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: phy@1 { + reg = <1>; + }; + + phy_port3: phy@2 { + reg = <2>; + }; + + switch@10 { + compatible = "qca,qca8334"; + reg = <10>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@2 { + reg = <2>; + label = "eth2"; + phy-handle = <&phy_port2>; + }; + + port@3 { + reg = <3>; + label = "eth1"; + phy-handle = <&phy_port3>; + }; + }; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_cec>; + ddc-i2c-bus = <&i2c2>; + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + status = "disabled"; + + chan0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "W"; + led-cur = /bits/ 8 <0x0>; + max-cur = /bits/ 8 <0x0>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + status = "okay"; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_hdmi_cec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 + >; + }; + + pinctrl_pcie_reg: pciereggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "disabled"; +}; + +&pwm1 { + #pwm-cells = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <&sw2_reg>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/src/arm/imx6dl-yapp4-draco.dts b/src/arm/imx6dl-yapp4-draco.dts new file mode 100644 index 000000000000..a38c407fd837 --- /dev/null +++ b/src/arm/imx6dl-yapp4-draco.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Draco i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/src/arm/imx6dl-yapp4-hydra.dts b/src/arm/imx6dl-yapp4-hydra.dts new file mode 100644 index 000000000000..f97927064750 --- /dev/null +++ b/src/arm/imx6dl-yapp4-hydra.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Hydra i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x80000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +®_pcie { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/src/arm/imx6dl-yapp4-ursa.dts b/src/arm/imx6dl-yapp4-ursa.dts new file mode 100644 index 000000000000..0d594e4bd559 --- /dev/null +++ b/src/arm/imx6dl-yapp4-ursa.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2015-2018 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp4-common.dtsi" + +/ { + model = "Y Soft IOTA Ursa i.MX6Solo board"; + compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&touchscreen { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/src/arm/imx6q-logicpd.dts b/src/arm/imx6q-logicpd.dts new file mode 100644 index 000000000000..45eb0b7f75f8 --- /dev/null +++ b/src/arm/imx6q-logicpd.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2019 Logic PD, Inc. + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6-logicpd-som.dtsi" +#include "imx6-logicpd-baseboard.dtsi" + +/ { + model = "Logic PD i.MX6QD SOM-M3"; + compatible = "fsl,imx6q"; + + backlight: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 20000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_lcd>; + }; + + panel-lvds0 { + compatible = "okaya,rs800480t-7x0gp"; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_lcd: regulator-lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reg>; + compatible = "regulator-fixed"; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_3v3>; + startup-delay-us = <500000>; + }; + + reg_lcd_reset: regulator-lcd-reset { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_reset>; + compatible = "regulator-fixed"; + regulator-name = "nLCD_RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <®_lcd>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + +}; + +&pwm3 { + status = "okay"; +}; + +®_hdmi { + regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */ +}; + +&iomuxc { + pinctrl_lcd_reg: lcdreg { + fsl,pins = < + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */ + >; + }; + + pinctrl_lcd_reset: lcdreset { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */ + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */ + >; + }; +}; diff --git a/src/arm/imx6q-tbs2910.dts b/src/arm/imx6q-tbs2910.dts index 279b15e9ae2e..2ce8399a10ba 100644 --- a/src/arm/imx6q-tbs2910.dts +++ b/src/arm/imx6q-tbs2910.dts @@ -1,49 +1,6 @@ -/* - * Copyright 2014 Soeren Moch - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2014 Soeren Moch /dts-v1/; diff --git a/src/arm/imx6qdl-apalis.dtsi b/src/arm/imx6qdl-apalis.dtsi index 8380f1b26826..7c4ad541c3f5 100644 --- a/src/arm/imx6qdl-apalis.dtsi +++ b/src/arm/imx6qdl-apalis.dtsi @@ -332,11 +332,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -346,17 +352,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -369,8 +375,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/src/arm/imx6qdl-colibri.dtsi b/src/arm/imx6qdl-colibri.dtsi index 87e15e7cb32b..1beac22266ed 100644 --- a/src/arm/imx6qdl-colibri.dtsi +++ b/src/arm/imx6qdl-colibri.dtsi @@ -262,11 +262,17 @@ id = <0>; blocks = <0x5>; irq-trigger = <0x1>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; stmpe_touchscreen { compatible = "st,stmpe-ts"; - /* 3.25 MHz ADC clock speed */ - st,adc-freq = <1>; /* 8 sample average control */ st,ave-ctrl = <3>; /* 7 length fractional part in z */ @@ -276,17 +282,17 @@ * current limit value */ st,i-drive = <1>; - /* 12-bit ADC */ - st,mod-12b = <1>; - /* internal ADC reference */ - st,ref-sel = <0>; - /* ADC converstion time: 80 clocks */ - st,sample-time = <4>; /* 1 ms panel driver settling time */ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; }; }; @@ -298,8 +304,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/src/arm/imx6qdl-icore-rqs.dtsi b/src/arm/imx6qdl-icore-rqs.dtsi index 1d1b4bd0670f..a4217f564a53 100644 --- a/src/arm/imx6qdl-icore-rqs.dtsi +++ b/src/arm/imx6qdl-icore-rqs.dtsi @@ -264,7 +264,7 @@ pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vmcc-supply = <®_sd3_vmmc>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - bus-witdh = <4>; + bus-width = <4>; no-1-8-v; status = "okay"; }; @@ -275,7 +275,7 @@ pinctrl-1 = <&pinctrl_usdhc4_100mhz>; pinctrl-2 = <&pinctrl_usdhc4_200mhz>; vmcc-supply = <®_sd4_vmmc>; - bus-witdh = <8>; + bus-width = <8>; no-1-8-v; non-removable; status = "okay"; diff --git a/src/arm/imx6qdl-phytec-pfla02.dtsi b/src/arm/imx6qdl-phytec-pfla02.dtsi index 1b50b01e9bac..027df06c5dc7 100644 --- a/src/arm/imx6qdl-phytec-pfla02.dtsi +++ b/src/arm/imx6qdl-phytec-pfla02.dtsi @@ -89,10 +89,24 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + phy-handle = <ðphy>; phy-mode = "rgmii"; + phy-reset-duration = <10>; /* in msecs */ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; phy-supply = <&vdd_eth_io_reg>; status = "disabled"; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + txc-skew-ps = <1680>; + rxc-skew-ps = <1860>; + }; + }; }; &gpmi { @@ -117,6 +131,7 @@ reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + interrupt-controller; regulators { vddcore_reg: bcore1 { diff --git a/src/arm/imx6qdl-sabresd.dtsi b/src/arm/imx6qdl-sabresd.dtsi index 8930aec6464c..a0705066ccba 100644 --- a/src/arm/imx6qdl-sabresd.dtsi +++ b/src/arm/imx6qdl-sabresd.dtsi @@ -64,7 +64,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; }; gpio-keys { @@ -250,6 +249,8 @@ pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; ov5642: camera@3c { @@ -440,6 +441,8 @@ pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <®_sensors>; + vddio-supply = <®_sensors>; }; light-sensor@44 { @@ -449,6 +452,7 @@ pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; interrupt-parent = <&gpio3>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <®_sensors>; }; }; diff --git a/src/arm/imx6sl.dtsi b/src/arm/imx6sl.dtsi index e7524e73efb4..4b4813f176cd 100644 --- a/src/arm/imx6sl.dtsi +++ b/src/arm/imx6sl.dtsi @@ -338,7 +338,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM1>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM1>; clock-names = "ipg", "per"; }; @@ -348,7 +348,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM2>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM2>; clock-names = "ipg", "per"; }; @@ -358,7 +358,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM3>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM3>; clock-names = "ipg", "per"; }; @@ -368,7 +368,7 @@ compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_PWM4>, + clocks = <&clks IMX6SL_CLK_PERCLK>, <&clks IMX6SL_CLK_PWM4>; clock-names = "ipg", "per"; }; diff --git a/src/arm/imx6sx.dtsi b/src/arm/imx6sx.dtsi index d1375d3650fd..5b16e65f7696 100644 --- a/src/arm/imx6sx.dtsi +++ b/src/arm/imx6sx.dtsi @@ -785,6 +785,18 @@ clocks = <&clks IMX6SX_CLK_GPU>; }; + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_VADC>; + }; + pd_pci: power-domain@3 { reg = <3>; #power-domain-cells = <0>; @@ -1205,6 +1217,7 @@ interrupts = ; clocks = <&clks IMX6SX_CLK_PXP_AXI>; clock-names = "axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1226,6 +1239,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1237,6 +1251,7 @@ <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; + power-domains = <&pd_disp>; status = "disabled"; }; @@ -1246,6 +1261,7 @@ clocks = <&clks IMX6SX_CLK_VADC>, <&clks IMX6SX_CLK_CSI>; clock-names = "vadc", "csi"; + power-domains = <&pd_disp>; status = "disabled"; }; }; @@ -1370,7 +1386,8 @@ <&clks IMX6SX_CLK_PCIE_REF_125M>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi"; - power-domains = <&pd_pci>; + power-domains = <&pd_disp>, <&pd_pci>; + power-domain-names = "pcie", "pcie_phy"; status = "disabled"; }; }; diff --git a/src/arm/imx6ul-phytec-pcl063.dtsi b/src/arm/imx6ul-phytec-pcl063.dtsi new file mode 100644 index 000000000000..fc2997449b49 --- /dev/null +++ b/src/arm/imx6ul-phytec-pcl063.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp + */ + +#include +#include +#include +#include "imx6ul.dtsi" + +/ { + model = "Phytec phyCORE i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + /* + * Set the minimum memory size here and + * let the bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + gpio_leds_som: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds_som>; + compatible = "gpio-leds"; + + led_green { + label = "phycore:green"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + eeprom@52 { + compatible = "catalyst,24c32", "atmel,24c32"; + reg = <0x52>; + }; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 + >; + }; + + pinctrl_gpioleds_som: gpioledssomgrp { + fsl,pins = ; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2cgrp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + +}; diff --git a/src/arm/imx6ul-phytec-peb-eval-01.dtsi b/src/arm/imx6ul-phytec-peb-eval-01.dtsi new file mode 100644 index 000000000000..e2f38f39a6ad --- /dev/null +++ b/src/arm/imx6ul-phytec-peb-eval-01.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik + * Author: Christian Hemp + */ + +#include + +/ { + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + power { + label = "Power Button"; + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + user_leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>; + status = "disabled"; + + led_yellow { + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led_red { + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x79 + >; + }; + + pinctrl_user_leds: user_ledsgrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x79 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 + >; + }; +}; diff --git a/src/arm/imx6ul-phytec-phyboard-segin-full.dts b/src/arm/imx6ul-phytec-phyboard-segin-full.dts new file mode 100644 index 000000000000..b6a1407a9d44 --- /dev/null +++ b/src/arm/imx6ul-phytec-phyboard-segin-full.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp + */ + +/dts-v1/; +#include "imx6ul-phytec-pcl063.dtsi" +#include "imx6ul-phytec-phyboard-segin.dtsi" +#include "imx6ul-phytec-peb-eval-01.dtsi" + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured"; + compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; +}; + +&adc1 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&tlv320 { + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec2 { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; + +®_can1_en { + status = "okay"; +}; + +®_sound_1v8 { + status = "okay"; +}; + +®_sound_3v3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sound { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usbotg2 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; +}; diff --git a/src/arm/imx6ul-phytec-phyboard-segin.dtsi b/src/arm/imx6ul-phytec-phyboard-segin.dtsi new file mode 100644 index 000000000000..7bf439a77d2c --- /dev/null +++ b/src/arm/imx6ul-phytec-phyboard-segin.dtsi @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * Author: Christian Hemp + */ + +/ { + model = "Phytec phyBOARD-Segin i.MX6 UltraLite"; + compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + status = "disabled"; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; + + reg_can1_en: regulator-can1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&princtrl_flexcan1_en>; + regulator-name = "Can"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&tlv320>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; + +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_adc1_vref_3v3>; + /* + * driver can not separate a specific channel so we request 4 channels + * here - we need only the fourth channel + */ + num-channels = <4>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_en>; + status = "disabled"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <786432000>; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "disabled"; +}; + +&i2c1 { + tlv320: codec@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; + reg = <0x18>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + status = "disabled"; + }; + + stmpe: touchscreen@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe>; + status = "disabled"; + + touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + touchscreen-inverted-x = <1>; + touchscreen-inverted-y = <1>; + }; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + }; +}; + +&mdio { + ethphy1: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <19200000>; + fsl,sai-mclk-direction-output; + status = "disabled"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "disabled"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "disabled"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "disabled"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + >; + }; + + pinctrl_flexcan1: flexcan1 { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + princtrl_flexcan1_en: flexcan1engrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; +}; diff --git a/src/arm/imx6ull-colibri.dtsi b/src/arm/imx6ull-colibri.dtsi index 6c63a7384611..9ad1da159768 100644 --- a/src/arm/imx6ull-colibri.dtsi +++ b/src/arm/imx6ull-colibri.dtsi @@ -94,16 +94,16 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ad7879@2c { diff --git a/src/arm/imx6ull-pinfunc-snvs.h b/src/arm/imx6ull-pinfunc-snvs.h index f6fb6783c193..54cfe72295aa 100644 --- a/src/arm/imx6ull-pinfunc-snvs.h +++ b/src/arm/imx6ull-pinfunc-snvs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2016 Freescale Semiconductor, Inc. * Copyright (C) 2017 NXP diff --git a/src/arm/imx6ull.dtsi b/src/arm/imx6ull.dtsi index f3668fe69eac..22e4a307fa59 100644 --- a/src/arm/imx6ull.dtsi +++ b/src/arm/imx6ull.dtsi @@ -30,6 +30,18 @@ >; }; +&ocotp { + compatible = "fsl,imx6ull-ocotp", "syscon"; +}; + +&usdhc1 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + +&usdhc2 { + compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/src/arm/imx7d.dtsi b/src/arm/imx7d.dtsi index 6b298e388f4b..6eb98e7c568d 100644 --- a/src/arm/imx7d.dtsi +++ b/src/arm/imx7d.dtsi @@ -96,6 +96,14 @@ }; }; +&aips2 { + pcie_phy: pcie-phy@306d0000 { + compatible = "fsl,imx7d-pcie-phy"; + reg = <0x306d0000 0x10000>; + status = "disabled"; + }; +}; + &aips3 { usbotg2: usb@30b20000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; @@ -173,6 +181,7 @@ <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "pciephy", "apps", "turnoff"; + fsl,imx7d-pcie-phy = <&pcie_phy>; status = "disabled"; }; }; diff --git a/src/arm/imx7ulp.dtsi b/src/arm/imx7ulp.dtsi index 931b2754b099..fca6e50f37c8 100644 --- a/src/arm/imx7ulp.dtsi +++ b/src/arm/imx7ulp.dtsi @@ -199,9 +199,13 @@ assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; }; - smc1: smc1@40410000 { + smc1: clock-controller@40410000 { compatible = "fsl,imx7ulp-smc1"; reg = <0x40410000 0x1000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; + clock-names = "divcore", "hsrun_divcore"; }; pcc3: clock-controller@40b30000 { @@ -343,4 +347,17 @@ gpio-ranges = <&iomuxc1 0 96 32>; }; }; + + m4aips1: bus@41080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x41080000 0x80000>; + ranges; + + sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; + }; }; diff --git a/src/arm/integrator.dtsi b/src/arm/integrator.dtsi index 4d58638d104b..1612a869a4f7 100644 --- a/src/arm/integrator.dtsi +++ b/src/arm/integrator.dtsi @@ -3,9 +3,15 @@ * SoC core Device Tree for the ARM Integrator platforms */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + core-module@10000000 { compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; diff --git a/src/arm/integratorcp.dts b/src/arm/integratorcp.dts index a185ab8759fa..01fa229e1bd0 100644 --- a/src/arm/integratorcp.dts +++ b/src/arm/integratorcp.dts @@ -192,6 +192,43 @@ interrupts = <27>; }; + bridge { + compatible = "ti,ths8134a", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + fpga { /* * These PrimeCells are at the same location and using @@ -254,39 +291,27 @@ interrupts = <22>; clocks = <&auxosc>, <&pclk>; clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; - port { - /* - * The VGA connected is implemented with a - * THS8134A triple DAC that can be run in 24bit - * or 16bit RGB mode. - */ - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - }; - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - /* Standard 640x480 VGA timings */ - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <48>; - hfront-porch = <16>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <33>; - vfront-porch = <10>; - vsync-len = <2>; + /* + * This port is routed through a PLD (Programmable + * Logic Device) that routes the output from the CLCD + * (after transformations) to the VGA DAC and also an + * external panel connector. The PLD is essential for + * supporting RGB565/BGR565. + * + * The signals from the port thus reaches two endpoints. + * The PLD is managed through a few special bits in the + * FPGA "sysreg". + * + * This arrangement can be clearly seen in + * ARM DUI 0225D, page 3-41, figure 3-19. + */ + port@0 { + clcd_pads_vga_dac: endpoint { + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; }; diff --git a/src/arm/kirkwood-dir665.dts b/src/arm/kirkwood-dir665.dts index 31ceacd841de..b3ad3f607d31 100644 --- a/src/arm/kirkwood-dir665.dts +++ b/src/arm/kirkwood-dir665.dts @@ -190,53 +190,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan4"; - }; - - port@1 { - reg = <1>; - label = "lan3"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@6 { - reg = <6>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/src/arm/kirkwood-linksys-viper.dts b/src/arm/kirkwood-linksys-viper.dts index a7d659b7145a..2f9660f3b457 100644 --- a/src/arm/kirkwood-linksys-viper.dts +++ b/src/arm/kirkwood-linksys-viper.dts @@ -66,53 +66,6 @@ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@16,0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <16 0>; /* MDIO address 16, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "ethernet1"; - }; - - port@1 { - reg = <1>; - label = "ethernet2"; - }; - - port@2 { - reg = <2>; - label = "ethernet3"; - }; - - port@3 { - reg = <3>; - label = "ethernet4"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &pinctrl { diff --git a/src/arm/kirkwood-mv88f6281gtw-ge.dts b/src/arm/kirkwood-mv88f6281gtw-ge.dts index 86d532916d56..2e1a75348908 100644 --- a/src/arm/kirkwood-mv88f6281gtw-ge.dts +++ b/src/arm/kirkwood-mv88f6281gtw-ge.dts @@ -107,53 +107,6 @@ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <1>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; - }; }; &mdio { diff --git a/src/arm/kirkwood-rd88f6281-z0.dts b/src/arm/kirkwood-rd88f6281-z0.dts index a9fee2c2bcaf..9d88301daf0e 100644 --- a/src/arm/kirkwood-rd88f6281-z0.dts +++ b/src/arm/kirkwood-rd88f6281-z0.dts @@ -16,15 +16,6 @@ model = "Marvell RD88f6281 Reference design, with Z0 SoC"; compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood"; - dsa { - switch@0 { - reg = <0 0>; /* MDIO address 0, switch 0 in tree */ - port@4 { - reg = <4>; - label = "wan"; - }; - }; - }; }; ð1 { diff --git a/src/arm/kirkwood-rd88f6281.dtsi b/src/arm/kirkwood-rd88f6281.dtsi index 0f22f0e6f56b..f1f8eee132e8 100644 --- a/src/arm/kirkwood-rd88f6281.dtsi +++ b/src/arm/kirkwood-rd88f6281.dtsi @@ -48,47 +48,6 @@ cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; /* No WP GPIO */ }; - }; - - dsa { - status = "disabled"; - - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - - dsa,ethernet = <ð0port>; - dsa,mii-bus = <&mdio>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - }; }; }; diff --git a/src/arm/kirkwood.dtsi b/src/arm/kirkwood.dtsi index 81c7eda2c442..2161e23bd98e 100644 --- a/src/arm/kirkwood.dtsi +++ b/src/arm/kirkwood.dtsi @@ -1,11 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -/include/ "skeleton.dtsi" #include #include #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; diff --git a/src/arm/lpc3250-ea3250.dts b/src/arm/lpc3250-ea3250.dts index 58ea0a4e7afa..f46a11827ef6 100644 --- a/src/arm/lpc3250-ea3250.dts +++ b/src/arm/lpc3250-ea3250.dts @@ -17,64 +17,70 @@ / { model = "Embedded Artists LPC3250 board based on NXP LPC3250"; compatible = "ea,ea3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@21 { + + button { label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { label = "KEY1"; linux,code = <1>; gpios = <&pca9532 0 0>; }; + key2 { label = "KEY2"; linux,code = <2>; gpios = <&pca9532 1 0>; }; + key3 { label = "KEY3"; linux,code = <3>; gpios = <&pca9532 2 0>; }; + key4 { label = "KEY4"; linux,code = <4>; gpios = <&pca9532 3 0>; }; + joy0 { label = "Joystick Key 0"; linux,code = <10>; gpios = <&gpio 2 0 0>; /* P2.0 */ }; + joy1 { label = "Joystick Key 1"; linux,code = <11>; gpios = <&gpio 2 1 0>; /* P2.1 */ }; + joy2 { label = "Joystick Key 2"; linux,code = <12>; gpios = <&gpio 2 2 0>; /* P2.2 */ }; + joy3 { label = "Joystick Key 3"; linux,code = <13>; gpios = <&gpio 2 3 0>; /* P2.3 */ }; + joy4 { label = "Joystick Key 4"; linux,code = <14>; diff --git a/src/arm/lpc3250-phy3250.dts b/src/arm/lpc3250-phy3250.dts index 1e1c2f517a82..ebd19258e22b 100644 --- a/src/arm/lpc3250-phy3250.dts +++ b/src/arm/lpc3250-phy3250.dts @@ -1,6 +1,7 @@ /* * PHYTEC phyCORE-LPC3250 board * + * Copyright (C) 2015-2019 Vladimir Zapolskiy * Copyright 2012 Roland Stigge * * The code contained herein is licensed under the GNU General Public @@ -17,45 +18,12 @@ / { model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250"; compatible = "phytec,phy3250", "nxp,lpc3250"; - #address-cells = <1>; - #size-cells = <1>; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x4000000>; }; - regulators { - backlight_reg: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "backlight_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 4 0>; - enable-active-high; - regulator-boot-on; - }; - - lcd_reg: regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "lcd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 0 0>; - enable-active-high; - regulator-boot-on; - }; - - sd_reg: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio 5 5 0>; - enable-active-high; - }; - }; - leds { compatible = "gpio-leds"; @@ -69,10 +37,59 @@ linux,default-trigger = "heartbeat"; }; }; + + panel: panel { + compatible = "sharp,lq035q7db03"; + power-supply = <®_lcd>; + + port { + panel_input: endpoint { + remote-endpoint = <&cldc_output>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 4 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio 5 0 0>; + enable-active-high; + regulator-boot-on; + }; + + reg_sd: regulator-sd { + compatible = "regulator-fixed"; + regulator-name = "sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 5 5 0>; + enable-active-high; + regulator-boot-on; + }; }; &clcd { + max-memory-bandwidth = <18710000>; status = "okay"; + + port { + cldc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; }; &i2c1 { @@ -130,7 +147,7 @@ cd-gpios = <&gpio 3 1 0>; cd-inverted; bus-width = <4>; - vmmc-supply = <&sd_reg>; + vmmc-supply = <®_sd>; status = "okay"; }; diff --git a/src/arm/lpc32xx.dtsi b/src/arm/lpc32xx.dtsi index b7303a4e4236..20b38f4ade37 100644 --- a/src/arm/lpc32xx.dtsi +++ b/src/arm/lpc32xx.dtsi @@ -11,12 +11,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" - #include #include / { + #address-cells = <1>; + #size-cells = <1>; compatible = "nxp,lpc3220"; interrupt-parent = <&mic>; @@ -139,11 +139,11 @@ }; clcd: clcd@31040000 { - compatible = "arm,pl110", "arm,primecell"; + compatible = "arm,pl111", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk LPC32XX_CLK_LCD>; - clock-names = "apb_pclk"; + clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>; + clock-names = "clcdclk", "apb_pclk"; status = "disabled"; }; @@ -230,7 +230,7 @@ status = "disabled"; }; - i2s1: i2s@2009C000 { + i2s1: i2s@2009c000 { compatible = "nxp,lpc3220-i2s"; reg = <0x2009C000 0x1000>; }; @@ -273,7 +273,7 @@ status = "disabled"; }; - i2c1: i2c@400A0000 { + i2c1: i2c@400a0000 { compatible = "nxp,pnx-i2c"; reg = <0x400A0000 0x100>; interrupt-parent = <&sic1>; @@ -284,7 +284,7 @@ clocks = <&clk LPC32XX_CLK_I2C1>; }; - i2c2: i2c@400A8000 { + i2c2: i2c@400a8000 { compatible = "nxp,pnx-i2c"; reg = <0x400A8000 0x100>; interrupt-parent = <&sic1>; @@ -295,7 +295,7 @@ clocks = <&clk LPC32XX_CLK_I2C2>; }; - mpwm: mpwm@400E8000 { + mpwm: mpwm@400e8000 { compatible = "nxp,lpc3220-motor-pwm"; reg = <0x400E8000 0x78>; status = "disabled"; @@ -394,7 +394,7 @@ #gpio-cells = <3>; /* bank, pin, flags */ }; - timer4: timer@4002C000 { + timer4: timer@4002c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4002C000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -412,7 +412,7 @@ status = "disabled"; }; - watchdog: watchdog@4003C000 { + watchdog: watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; clocks = <&clk LPC32XX_CLK_WDOG>; @@ -451,7 +451,7 @@ status = "disabled"; }; - timer1: timer@4004C000 { + timer1: timer@4004c000 { compatible = "nxp,lpc3220-timer"; reg = <0x4004C000 0x1000>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; @@ -462,7 +462,9 @@ key: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -475,7 +477,7 @@ status = "disabled"; }; - pwm1: pwm@4005C000 { + pwm1: pwm@4005c000 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; @@ -484,7 +486,7 @@ status = "disabled"; }; - pwm2: pwm@4005C004 { + pwm2: pwm@4005c004 { compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; diff --git a/src/arm/lpc4350-hitex-eval.dts b/src/arm/lpc4350-hitex-eval.dts index 8b973f537d3a..93d0c2e99e7c 100644 --- a/src/arm/lpc4350-hitex-eval.dts +++ b/src/arm/lpc4350-hitex-eval.dts @@ -40,8 +40,6 @@ pca_buttons { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/src/arm/lpc4357-ea4357-devkit.dts b/src/arm/lpc4357-ea4357-devkit.dts index 02b23fa29d75..224f80a4a31d 100644 --- a/src/arm/lpc4357-ea4357-devkit.dts +++ b/src/arm/lpc4357-ea4357-devkit.dts @@ -57,8 +57,6 @@ compatible = "gpio-keys-polled"; pinctrl-names = "default"; pinctrl-0 = <&gpio_joystick_pins>; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; autorepeat; diff --git a/src/arm/lpc4357-myd-lpc4357.dts b/src/arm/lpc4357-myd-lpc4357.dts new file mode 100644 index 000000000000..1f84654df50c --- /dev/null +++ b/src/arm/lpc4357-myd-lpc4357.dts @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel + * + * Copyright (C) 2016-2018 Vladimir Zapolskiy + */ + +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +#include + +/ { + model = "MYIR Tech LPC4357 Development Board"; + compatible = "myir,myd-lpc4357", "nxp,lpc4357"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + memory@28000000 { + device_type = "memory"; + reg = <0x28000000 0x2000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led4 { + gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led5 { + gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led6 { + gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + panel: panel { + compatible = "innolux,at070tn92"; + + port { + panel_input: endpoint { + remote-endpoint = <&lcdc_output>; + }; + }; + }; + + vcc: vcc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vcc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vmmc: vmmc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&pinctrl { + can0_pins: can0-pins { + can_rd_cfg { + pins = "p3_1"; + function = "can0"; + input-enable; + }; + + can_td_cfg { + pins = "p3_2"; + function = "can0"; + }; + }; + + can1_pins: can1-pins { + can_rd_cfg { + pins = "pe_1"; + function = "can1"; + input-enable; + }; + + can_td_cfg { + pins = "pe_0"; + function = "can1"; + }; + }; + + emc_pins: emc-pins { + emc_addr0_22_cfg { + pins = "p2_9", "p2_10", "p2_11", "p2_12", + "p2_13", "p1_0", "p1_1", "p1_2", + "p2_8", "p2_7", "p2_6", "p2_2", + "p2_1", "p2_0", "p6_8", "p6_7", + "pd_16", "pd_15", "pe_0", "pe_1", + "pe_2", "pe_3", "pe_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_data0_15_cfg { + pins = "p1_7", "p1_8", "p1_9", "p1_10", + "p1_11", "p1_12", "p1_13", "p1_14", + "p5_4", "p5_5", "p5_6", "p5_7", + "p5_0", "p5_1", "p5_2", "p5_3"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + emc_we_oe_cfg { + pins = "p1_6", "p1_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_cs0_cfg { + pins = "p1_5"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dqm0_1_cfg { + pins = "p6_12", "p6_10"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_ras_cas_cfg { + pins = "p6_5", "p6_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_dycs0_cfg { + pins = "p6_9"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_cke_cfg { + pins = "p6_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + }; + + emc_sdram_clock_cfg { + pins = "clk0"; + function = "emc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + }; + + enet_rmii_pins: enet-rmii-pins { + enet_rmii_rxd_cfg { + pins = "p1_15", "p0_0"; + function = "enet"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_txd_cfg { + pins = "p1_18", "p1_20"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_rx_dv_cfg { + pins = "p1_16"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + enet_mdc_cfg { + pins = "pc_1"; + function = "enet"; + slew-rate = <1>; + bias-disable; + }; + + enet_rmii_tx_en_cfg { + pins = "p0_1"; + function = "enet"; + bias-disable; + }; + + enet_ref_clk_cfg { + pins = "p1_19"; + function = "enet"; + slew-rate = <1>; + input-enable; + input-schmitt-disable; + bias-disable; + }; + }; + + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + i2c1_pins_cfg { + pins = "pe_15", "pe_13"; + function = "i2c1"; + input-enable; + }; + }; + + lcd_pins: lcd-pins { + lcd_vd0_23_cfg { + pins = "p4_1", "p4_4", "p4_3", "p4_2", + "p8_7", "p8_6", "p8_5", "p8_4", + "p7_5", "p4_8", "p4_10", "p4_9", + "p8_3", "pb_6", "pb_5", "pb_4", + "p7_4", "p7_3", "p7_2", "p7_1", + "pb_3", "pb_2", "pb_1", "pb_0"; + function = "lcd"; + }; + + lcd_vsync_en_dclk_lp_pwr_cfg { + pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7"; + function = "lcd"; + }; + }; + + led_pins: led-pins { + led_1_6_cfg { + pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0"; + function = "gpio"; + bias-pull-down; + }; + }; + + sdmmc_pins: sdmmc-pins { + sdmmc_clk_cfg { + pins = "pc_0"; + function = "sdmmc"; + slew-rate = <1>; + bias-pull-down; + }; + + sdmmc_cmd_dat0_3_cfg { + pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10"; + function = "sdmmc"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + sdmmc_cd_cfg { + pins = "pc_8"; + function = "sdmmc"; + input-enable; + bias-pull-down; + }; + }; + + spifi_pins: spifi-pins { + spifi_sck_cfg { + pins = "p3_3"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_mosi_miso_sio2_sio3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + + ssp1_pins: ssp1-pins { + ssp1_sck_cfg { + pins = "pf_4"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_miso_cfg { + pins = "pf_6"; + function = "ssp1"; + input-enable; + input-schmitt-disable; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_mosi_cfg { + pins = "pf_7"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + }; + + ssp1_ssel_cfg { + pins = "pf_5"; + function = "gpio"; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + uart0_rxd_cfg { + pins = "pf_11"; + function = "uart0"; + input-enable; + input-schmitt-disable; + bias-disable; + }; + + uart0_clk_dir_txd_cfg { + pins = "pf_8", "pf_9", "pf_10"; + function = "uart0"; + bias-pull-down; + }; + }; + + uart1_pins: uart1-pins { + uart1_rxd_cfg { + pins = "pc_14"; + function = "uart1"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart1_dtr_txd_cfg { + pins = "pc_12", "pc_13"; + function = "uart1"; + bias-pull-down; + }; + }; + + uart2_pins: uart2-pins { + uart2_rxd_cfg { + pins = "pa_2"; + function = "uart2"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart2_txd_cfg { + pins = "pa_1"; + function = "uart2"; + bias-pull-down; + }; + }; + + uart3_pins: uart3-pins { + uart3_rx_cfg { + pins = "p2_4"; + function = "uart3"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + uart3_tx_cfg { + pins = "p2_3"; + function = "uart3"; + bias-pull-down; + }; + }; + + usb0_pins: usb0-pins { + usb0_pwr_enable_cfg { + pins = "p6_3"; + function = "usb0"; + }; + + usb0_pwr_fault_cfg { + pins = "p8_0"; + function = "usb0"; + bias-disable; + input-enable; + }; + }; +}; + +&adc1 { + status = "okay"; + vref-supply = <&vcc>; +}; + +&can0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins>; +}; + +/* Pin conflict with EMC, muxed by JP5 and JP6 */ +&can1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins>; +}; + +&emc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emc_pins>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-access-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + /* SST/Microchip SST39VF1601 */ + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + }; + }; +}; + +&enet_tx_clk { + clock-frequency = <50000000>; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + sensor@49 { + compatible = "lm75"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; +}; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + max-memory-bandwidth = <92240000>; + + port { + lcdc_output: endpoint { + remote-endpoint = <&panel_input>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; +}; + +&mac { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_rmii_pins>; + phy-handle = <&phy1>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&mmcsd { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pins>; + bus-width = <4>; + vmmc-supply = <&vmmc>; +}; + +/* Pin conflict with SSP0, the latter is routed to J17 pin header */ +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + /* Atmel AT25DF321A */ + flash { + compatible = "jedec,spi-nor"; + spi-max-frequency = <51000000>; + spi-cpol; + spi-cpha; + }; +}; + +&ssp1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_pins>; + num-cs = <1>; + cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>; +}; + +/* Routed to J17 pin header */ +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +/* RS485 */ +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +/* Routed to J17 pin header */ +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; +}; diff --git a/src/arm/ls1021a-moxa-uc-8410a.dts b/src/arm/ls1021a-moxa-uc-8410a.dts index 6a83f30029ea..ba1ddd93b8f8 100644 --- a/src/arm/ls1021a-moxa-uc-8410a.dts +++ b/src/arm/ls1021a-moxa-uc-8410a.dts @@ -18,6 +18,7 @@ / { model = "Moxa UC-8410A"; + compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy0; diff --git a/src/arm/ls1021a-qds.dts b/src/arm/ls1021a-qds.dts index 923a25760516..ca60730dda40 100644 --- a/src/arm/ls1021a-qds.dts +++ b/src/arm/ls1021a-qds.dts @@ -51,6 +51,7 @@ / { model = "LS1021A QDS Board"; + compatible = "fsl,ls1021a-qds", "fsl,ls1021a"; aliases { enet0_rgmii_phy = &rgmii_phy1; diff --git a/src/arm/ls1021a-twr.dts b/src/arm/ls1021a-twr.dts index 8b48c3c7cd21..97e1fb7ea932 100644 --- a/src/arm/ls1021a-twr.dts +++ b/src/arm/ls1021a-twr.dts @@ -51,6 +51,7 @@ / { model = "LS1021A TWR Board"; + compatible = "fsl,ls1021a-twr", "fsl,ls1021a"; aliases { enet2_rgmii_phy = &rgmii_phy1; diff --git a/src/arm/ls1021a.dtsi b/src/arm/ls1021a.dtsi index ed0941292172..b4f2723ecd86 100644 --- a/src/arm/ls1021a.dtsi +++ b/src/arm/ls1021a.dtsi @@ -45,11 +45,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" #include #include / { + #address-cells = <2>; + #size-cells = <2>; compatible = "fsl,ls1021a"; interrupt-parent = <&gic>; @@ -88,6 +89,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -125,6 +131,13 @@ interrupt-parent = <&gic>; ranges; + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = ; + big-endian; + }; + gic: interrupt-controller@1400000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; @@ -706,6 +719,7 @@ fsl,tmr-fiper1 = <999999995>; fsl,tmr-fiper2 = <99990>; fsl,max-adj = <499999999>; + fsl,extts-fifo; }; enet0: ethernet@2d10000 { @@ -811,6 +825,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; pcie@3400000 { @@ -824,6 +839,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -848,6 +864,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/src/arm/meson.dtsi b/src/arm/meson.dtsi index 2ab74860d962..6f54a8897574 100644 --- a/src/arm/meson.dtsi +++ b/src/arm/meson.dtsi @@ -47,9 +47,10 @@ #include #include -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; L2: l2-cache-controller@c4200000 { @@ -72,6 +73,13 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + hhi: system-controller@4000 { + compatible = "amlogic,meson-hhi-sysctrl", + "simple-mfd", + "syscon"; + reg = <0x4000 0x400>; + }; + assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; diff --git a/src/arm/meson6-atv1200.dts b/src/arm/meson6-atv1200.dts index fc48cff71ddf..997e69c5963e 100644 --- a/src/arm/meson6-atv1200.dts +++ b/src/arm/meson6-atv1200.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; }; diff --git a/src/arm/meson6.dtsi b/src/arm/meson6.dtsi index ca978ab952cd..65585255910a 100644 --- a/src/arm/meson6.dtsi +++ b/src/arm/meson6.dtsi @@ -70,6 +70,14 @@ }; }; + apb2: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x40000>; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/src/arm/meson8-minix-neo-x8.dts b/src/arm/meson8-minix-neo-x8.dts index 55fb090a40ef..8686abd5de7f 100644 --- a/src/arm/meson8-minix-neo-x8.dts +++ b/src/arm/meson8-minix-neo-x8.dts @@ -57,6 +57,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; diff --git a/src/arm/meson8.dtsi b/src/arm/meson8.dtsi index e5cd325d7ea8..a9781243453e 100644 --- a/src/arm/meson8.dtsi +++ b/src/arm/meson8.dtsi @@ -166,6 +166,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-182150000 { + opp-hz = /bits/ 64 <182150000>; + opp-microvolt = <1150000>; + }; + opp-318750000 { + opp-hz = /bits/ 64 <318750000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = , @@ -201,6 +227,46 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2", "pp4", "ppmmu4", + "pp5", "ppmmu5", "pp6", "ppmmu6"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + switch-delay = <0xffff>; + }; + }; }; /* end of / */ &aobus { @@ -261,13 +327,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -390,6 +449,11 @@ compatible = "amlogic,meson8-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -402,6 +466,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -469,6 +541,9 @@ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/src/arm/meson8b-ec100.dts b/src/arm/meson8b-ec100.dts index d50fc2f60fa3..3ca9638fad09 100644 --- a/src/arm/meson8b-ec100.dts +++ b/src/arm/meson8b-ec100.dts @@ -23,6 +23,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -64,6 +65,11 @@ timeout-ms = <20000>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + leds { compatible = "gpio-leds"; @@ -83,6 +89,9 @@ }; usb_vbus: regulator-usb-vbus { + /* + * Silergy SY6288CCAC-GP 2A Power Distribution Switch. + */ compatible = "regulator-fixed"; regulator-name = "USB_VBUS"; @@ -90,11 +99,20 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* + * signal name from the schematics: USB_PWR_EN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; }; vcc_5v: regulator-vcc5v { + /* + * supplied by the main power input which called PWR_5V_STB + * in the schematics + */ compatible = "regulator-fixed"; regulator-name = "VCC5V"; @@ -102,6 +120,9 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from the schematics: 3V3_5V_EN + */ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; regulator-boot-on; @@ -109,12 +130,18 @@ }; vcck: regulator-vcck { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. + */ compatible = "pwm-regulator"; regulator-name = "VCCK"; regulator-min-microvolt = <860000>; regulator-max-microvolt = <1140000>; + vin-supply = <&vcc_5v>; + pwms = <&pwm_cd 0 1148 0>; pwm-dutycycle-range = <100 0>; @@ -123,19 +150,66 @@ }; vcc_1v8: regulator-vcc1v8 { + /* + * ABLIC S-1339D18-M5001-GP + */ compatible = "regulator-fixed"; regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; }; vcc_3v3: regulator-vcc3v3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * VDDIO_AO3.3V in the schematics. + */ compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_ddr3: regulator-vcc-ddr3 { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called + * DDR3_1.5V in the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&vcc_5v>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_rtc: regulator-vcc-rtc { + /* + * Global Mixed-mode Technology Inc. G918T12U-GP + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + /* + * When the board is powered then the input is VCC3V3, + * otherwise power is taken from the coin cell battery. + */ + vin-supply = <&vcc_3v3>; }; }; @@ -164,6 +238,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; }; @@ -211,6 +289,56 @@ }; }; +&gpio_ao { + gpio-line-names = "Linux_TX", "Linux_RX", + "SLP_S5_N", "USB2_OC_FLAG#", + "HUB_RST", "USB_PWR_EN", + "I2S_IN", "SLP_S1_N", + "TCK", "TMS", "TDI", "TDO", + "HDMI_CEC", "5640_IRQ", + "MUTE", "S805_TEST#"; +}; + +&gpio { + gpio-line-names = /* Bank GPIOX */ + "WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2", + "WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN", + "BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK", + "WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN", + "UART_B_TX", "UART_B_RX", "UART_B_CTS_N", + "UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST", + /* Bank GPIOY */ + "", "", "", "", "", "", "", "", "", "", + "", "", + /* Bank GPIODV */ + "VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A", + "I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D", + "VDDEE_PWM 3V3_5V_EN", + /* Bank GPIOH */ + "HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL", + "RMII_IRQ", "RMII_RST#", "RMII_TXD1", + "RMII_TXD0", "AV_select_1", "AV_select_2", + "MCU_Control_S", + /* Bank CARD */ + "SD_D1_B", "SD_D0_B", "SD_CLK_8726MX", + "SD_CMD_8726MX", "SD_D3_B", "SD_D2_B", + "CARD_EN_DET (CARD_DET)", + /* Bank BOOT */ + "NAND_D0 (EMMC)", "NAND_D1 (EMMC)", + "NAND_D2 (EMMC)", "NAND_D3 (EMMC)", + "NAND_D4 (EMMC)", "NAND_D5 (EMMC)", + "NAND_D6 (EMMC)", "NAND_D7 (EMMC)", + "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)", + "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)", + "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)", + "nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS", + /* Bank DIF */ + "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV", + "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5", + "RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC", + "RMII_MDIO"; +}; + &pwm_cd { status = "okay"; pinctrl-0 = <&pwm_c1_pins>; diff --git a/src/arm/meson8b-mxq.dts b/src/arm/meson8b-mxq.dts index 5c9b76af8d42..08ddd7fb0bf8 100644 --- a/src/arm/meson8b-mxq.dts +++ b/src/arm/meson8b-mxq.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; }; diff --git a/src/arm/meson8b-odroidc1.dts b/src/arm/meson8b-odroidc1.dts index 0f0a46ddf3ff..3b0e0f8fbc23 100644 --- a/src/arm/meson8b-odroidc1.dts +++ b/src/arm/meson8b-odroidc1.dts @@ -62,6 +62,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x40000000>; }; @@ -118,6 +119,11 @@ 1800000 1>; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + vcc_1v8: regulator-vcc-1v8 { /* * RICHTEK RT9179 configured for a fixed output voltage of diff --git a/src/arm/meson8b.dtsi b/src/arm/meson8b.dtsi index 22d775460767..fe84a8c3ce81 100644 --- a/src/arm/meson8b.dtsi +++ b/src/arm/meson8b.dtsi @@ -158,6 +158,32 @@ }; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-255000000 { + opp-hz = /bits/ 64 <255000000>; + opp-microvolt = <1150000>; + }; + opp-364300000 { + opp-hz = /bits/ 64 <364300000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; + }; + }; + pmu { compatible = "arm,cortex-a5-pmu"; interrupts = , @@ -178,6 +204,34 @@ no-map; }; }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8b-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + switch-delay = <0xffff>; + }; + }; }; /* end of / */ &aobus { @@ -222,13 +276,6 @@ }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -270,9 +317,7 @@ groups = "eth_tx_clk", "eth_tx_en", "eth_txd1_0", - "eth_txd1_1", "eth_txd0_0", - "eth_txd0_1", "eth_rx_clk", "eth_rx_dv", "eth_rxd1", @@ -281,7 +326,9 @@ "eth_mdc", "eth_ref_clk", "eth_txd2", - "eth_txd3"; + "eth_txd3", + "eth_rxd3", + "eth_rxd2"; function = "ethernet"; bias-disable; }; @@ -360,6 +407,11 @@ compatible = "amlogic,meson8b-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -383,6 +435,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -450,6 +510,9 @@ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { diff --git a/src/arm/meson8m2-mxiii-plus.dts b/src/arm/meson8m2-mxiii-plus.dts index 6ac02beb5fa7..29d830ae4bf4 100644 --- a/src/arm/meson8m2-mxiii-plus.dts +++ b/src/arm/meson8m2-mxiii-plus.dts @@ -28,6 +28,7 @@ }; memory { + device_type = "memory"; reg = <0x40000000 0x80000000>; }; @@ -44,6 +45,11 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/src/arm/meson8m2.dtsi b/src/arm/meson8m2.dtsi index d1a28c2adac5..bb87b251e16d 100644 --- a/src/arm/meson8m2.dtsi +++ b/src/arm/meson8m2.dtsi @@ -50,6 +50,10 @@ }; }; +&saradc { + compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; +}; + &wdt { compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt"; }; diff --git a/src/arm/milbeaut-m10v-evb.dts b/src/arm/milbeaut-m10v-evb.dts new file mode 100644 index 000000000000..614f60c6b0a2 --- /dev/null +++ b/src/arm/milbeaut-m10v-evb.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Socionext Milbeaut M10V Evaluation Board */ +/dts-v1/; +#include "milbeaut-m10v.dtsi" + +/ { + model = "Socionext M10V EVB"; + compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a"; + + aliases { + serial0 = &uart1; + }; + + chosen { + bootargs = "rootwait earlycon"; + stdout-path = "serial0:115200n8"; + }; + + clocks { + uclk40xi: uclk40xi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + +}; diff --git a/src/arm/milbeaut-m10v.dtsi b/src/arm/milbeaut-m10v.dtsi new file mode 100644 index 000000000000..aa7c6caeb750 --- /dev/null +++ b/src/arm/milbeaut-m10v.dtsi @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include + +/ { + compatible = "socionext,sc2000a"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,milbeaut-m10v-smp"; + cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + }; + cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + }; + cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + }; + }; + + timer { /* The Generic Timer */ + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <40000000>; + always-on; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&gic>; + + gic: interrupt-controller@1d000000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1d001000 0x1000>, + <0x1d002000 0x1000>; /* CPU I/f base and size */ + }; + + timer@1e000050 { /* 32-bit Reload Timers */ + compatible = "socionext,milbeaut-timer"; + reg = <0x1e000050 0x20>; + interrupts = <0 91 4>; + }; + + uart1: serial@1e700010 { /* PE4, PE5 */ + /* Enable this as ttyUSI0 */ + compatible = "socionext,milbeaut-usio-uart"; + reg = <0x1e700010 0x10>; + interrupts = <0 141 0x4>, <0 149 0x4>; + interrupt-names = "rx", "tx"; + }; + + }; + + sram@0 { + compatible = "mmio-sram"; + reg = <0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x10000>; + smp-sram@f100 { + compatible = "socionext,milbeaut-smp-sram"; + reg = <0xf100 0x20>; + }; + }; +}; diff --git a/src/arm/mmp2-brownstone.dts b/src/arm/mmp2-brownstone.dts index 350208c5e1ed..3da038ba5733 100644 --- a/src/arm/mmp2-brownstone.dts +++ b/src/arm/mmp2-brownstone.dts @@ -19,6 +19,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x08000000>; }; diff --git a/src/arm/mmp2.dtsi b/src/arm/mmp2.dtsi index ee03e0846740..f02fb97f515c 100644 --- a/src/arm/mmp2.dtsi +++ b/src/arm/mmp2.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/src/arm/moxart.dtsi b/src/arm/moxart.dtsi index da7b3237bfe9..cbf17656bcc7 100644 --- a/src/arm/moxart.dtsi +++ b/src/arm/moxart.dtsi @@ -5,10 +5,11 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" #include / { + #address-cells = <1>; + #size-cells = <1>; compatible = "moxa,moxart"; model = "MOXART"; interrupt-parent = <&intc>; diff --git a/src/arm/mps2.dtsi b/src/arm/mps2.dtsi index 23467390558d..96fb5a5cf4d3 100644 --- a/src/arm/mps2.dtsi +++ b/src/arm/mps2.dtsi @@ -171,7 +171,7 @@ uart0: serial@4000 { compatible = "arm,mps2-uart"; reg = <0x4000 0x1000>; - interrupts = <0 1 12>; + interrupts = <0>, <1>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -179,7 +179,7 @@ uart1: serial@5000 { compatible = "arm,mps2-uart"; reg = <0x5000 0x1000>; - interrupts = <2 3 12>; + interrupts = <2>, <3>, <12>; clocks = <&sysclk>; status = "disabled"; }; @@ -187,7 +187,7 @@ uart2: serial@6000 { compatible = "arm,mps2-uart"; reg = <0x6000 0x1000>; - interrupts = <4 5 12>; + interrupts = <4>, <5>, <12>; clocks = <&sysclk>; status = "disabled"; }; diff --git a/src/arm/mt2701-evb.dts b/src/arm/mt2701-evb.dts index be0edb3dae6c..88f8fd22302a 100644 --- a/src/arm/mt2701-evb.dts +++ b/src/arm/mt2701-evb.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt2701-evb", "mediatek,mt2701"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; diff --git a/src/arm/mt2701.dtsi b/src/arm/mt2701.dtsi index 180377e56ef4..51e1305c6471 100644 --- a/src/arm/mt2701.dtsi +++ b/src/arm/mt2701.dtsi @@ -12,10 +12,11 @@ #include #include #include -#include "skeleton64.dtsi" #include "mt2701-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt2701"; interrupt-parent = <&cirq>; diff --git a/src/arm/mt6580-evbp1.dts b/src/arm/mt6580-evbp1.dts index ca137897ed60..755a0774a8ee 100644 --- a/src/arm/mt6580-evbp1.dts +++ b/src/arm/mt6580-evbp1.dts @@ -22,6 +22,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x20000000>; }; }; diff --git a/src/arm/mt6580.dtsi b/src/arm/mt6580.dtsi index 2bdc5ed12fca..9e17698c0609 100644 --- a/src/arm/mt6580.dtsi +++ b/src/arm/mt6580.dtsi @@ -7,7 +7,6 @@ #include #include -#include "skeleton.dtsi" / { compatible = "mediatek,mt6580"; diff --git a/src/arm/mt6589-aquaris5.dts b/src/arm/mt6589-aquaris5.dts index 7bbaa1279a26..1e7079a3b449 100644 --- a/src/arm/mt6589-aquaris5.dts +++ b/src/arm/mt6589-aquaris5.dts @@ -18,6 +18,7 @@ }; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; diff --git a/src/arm/mt6589.dtsi b/src/arm/mt6589.dtsi index 28df8495686a..f3ccb70c0779 100644 --- a/src/arm/mt6589.dtsi +++ b/src/arm/mt6589.dtsi @@ -7,9 +7,10 @@ #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6589"; interrupt-parent = <&sysirq>; diff --git a/src/arm/mt6592-evb.dts b/src/arm/mt6592-evb.dts index 02849f6548e3..5e00c1cca2d1 100644 --- a/src/arm/mt6592-evb.dts +++ b/src/arm/mt6592-evb.dts @@ -13,7 +13,7 @@ compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; memory { + device_type = "memory"; reg = <0x80000000 0x40000000>; }; }; - diff --git a/src/arm/mt6592.dtsi b/src/arm/mt6592.dtsi index 8696ac891d60..3716f8db951c 100644 --- a/src/arm/mt6592.dtsi +++ b/src/arm/mt6592.dtsi @@ -7,9 +7,10 @@ #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "mediatek,mt6592"; interrupt-parent = <&sysirq>; diff --git a/src/arm/mt7623.dtsi b/src/arm/mt7623.dtsi index 98f115966391..a79f0b6c3429 100644 --- a/src/arm/mt7623.dtsi +++ b/src/arm/mt7623.dtsi @@ -187,17 +187,26 @@ cooling-maps { map0 { trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_active>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/src/arm/mt8127-moose.dts b/src/arm/mt8127-moose.dts index 308829b2da86..560687af87dc 100644 --- a/src/arm/mt8127-moose.dts +++ b/src/arm/mt8127-moose.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/src/arm/mt8127.dtsi b/src/arm/mt8127.dtsi index 3adfc6f7859c..aced173c2a52 100644 --- a/src/arm/mt8127.dtsi +++ b/src/arm/mt8127.dtsi @@ -7,9 +7,10 @@ #include #include -#include "skeleton64.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8127"; interrupt-parent = <&sysirq>; diff --git a/src/arm/mt8135-evbp1.dts b/src/arm/mt8135-evbp1.dts index 0ace7a40a60d..f6147fe62f41 100644 --- a/src/arm/mt8135-evbp1.dts +++ b/src/arm/mt8135-evbp1.dts @@ -13,6 +13,7 @@ compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135"; memory { + device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; }; diff --git a/src/arm/mt8135.dtsi b/src/arm/mt8135.dtsi index 688069dc1533..0e4e835026db 100644 --- a/src/arm/mt8135.dtsi +++ b/src/arm/mt8135.dtsi @@ -9,10 +9,11 @@ #include #include #include -#include "skeleton64.dtsi" #include "mt8135-pinfunc.h" / { + #address-cells = <2>; + #size-cells = <2>; compatible = "mediatek,mt8135"; interrupt-parent = <&sysirq>; diff --git a/src/arm/nspire.dtsi b/src/arm/nspire.dtsi index 1a5ae4cd107f..5a3c1f9d1832 100644 --- a/src/arm/nspire.dtsi +++ b/src/arm/nspire.dtsi @@ -9,9 +9,9 @@ * */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&intc>; cpus { diff --git a/src/arm/omap3-evm-common.dtsi b/src/arm/omap3-evm-common.dtsi index 4c1227d1e79b..17c89df6ce6b 100644 --- a/src/arm/omap3-evm-common.dtsi +++ b/src/arm/omap3-evm-common.dtsi @@ -122,6 +122,7 @@ }; &mmc2 { + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; vmmc-supply = <&wl12xx_vmmc>; non-removable; bus-width = <4>; @@ -132,8 +133,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio5>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */ + /* gpio_149 with uart1_rts pad as wakeirq */ + interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, + <&omap3_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/src/arm/omap3-evm-processor-common.dtsi b/src/arm/omap3-evm-processor-common.dtsi index ce7f42f9448c..b4109f48ec18 100644 --- a/src/arm/omap3-evm-processor-common.dtsi +++ b/src/arm/omap3-evm-processor-common.dtsi @@ -86,6 +86,10 @@ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dir_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dir_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dir_cmd */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ >; }; @@ -127,9 +131,13 @@ >; }; + /* + * Note that gpio_150 pulled high with internal pull to prevent wlcore + * reset on return from off mode in idle. + */ wl12xx_gpio: pinmux_wl12xx_gpio { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_cts.gpio_150 */ OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ >; }; diff --git a/src/arm/omap3-gta04.dtsi b/src/arm/omap3-gta04.dtsi index 93b420934e8e..04f2b53d4d3d 100644 --- a/src/arm/omap3-gta04.dtsi +++ b/src/arm/omap3-gta04.dtsi @@ -32,6 +32,14 @@ display1 = &tv0; }; + ldo_3v3: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "ldo_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + /* fixed 26MHz oscillator */ hfclk_26m: oscillator { #clock-cells = <0>; @@ -116,6 +124,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint { @@ -125,7 +134,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight"; @@ -224,6 +233,15 @@ }; }; +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ + >; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -312,6 +330,12 @@ >; }; + gps_pins: pinmux_gps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ + >; + }; + hdq_pins: hdq_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ @@ -636,6 +660,11 @@ status = "disabled"; }; +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -644,6 +673,14 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + gnss: gnss { + compatible = "wi2wi,w2sg0004"; + pinctrl-names = "default"; + pinctrl-0 = <&gps_pins>; + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + lna-supply = <&vsim>; + vcc-supply = <&ldo_3v3>; + }; }; &uart3 { diff --git a/src/arm/omap3-gta04a5.dts b/src/arm/omap3-gta04a5.dts index bd232b1b24cb..223b47ac596e 100644 --- a/src/arm/omap3-gta04a5.dts +++ b/src/arm/omap3-gta04a5.dts @@ -82,7 +82,7 @@ /* * for WL183x module see - * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt */ &wifi_pwrseq { diff --git a/src/arm/omap4-droid4-xt894.dts b/src/arm/omap4-droid4-xt894.dts index 67d77eee9433..e21ec929f096 100644 --- a/src/arm/omap4-droid4-xt894.dts +++ b/src/arm/omap4-droid4-xt894.dts @@ -359,20 +359,24 @@ &mmc3 { vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0xde>; - + interrupt-names = "irq", "wakeup"; non-removable; bus-width = <4>; cap-power-off-card; + keep-power-in-suspend; #address-cells = <1>; #size-cells = <0>; wlcore: wlcore@2 { compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; - interrupt-parent = <&gpio4>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */ + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/src/arm/omap4-panda-common.dtsi b/src/arm/omap4-panda-common.dtsi index 27895c1604b9..926f018823a4 100644 --- a/src/arm/omap4-panda-common.dtsi +++ b/src/arm/omap4-panda-common.dtsi @@ -485,8 +485,10 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio2>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + /* gpio_53 with gpmc_ncs3 pad as wakeup */ + interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + <&omap4_pmx_core 0x3a>; + interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; }; }; diff --git a/src/arm/omap4-sdp.dts b/src/arm/omap4-sdp.dts index 9dc7ec7655cb..c88817bdcc56 100644 --- a/src/arm/omap4-sdp.dts +++ b/src/arm/omap4-sdp.dts @@ -26,6 +26,9 @@ }; vdd_eth: fixedregulator-vdd-eth { + pinctrl-names = "default"; + pinctrl-0 = <&enet_enable_gpio>; + compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -352,6 +355,29 @@ OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; + + /* gpio_48 for ENET_ENABLE */ + enet_enable_gpio: pinmux_enet_enable_gpio { + pinctrl-single,pins = < + OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ + >; + }; + + ks8851_pins: pinmux_ks8851_pins { + pinctrl-single,pins = < + /* ENET_INT */ + OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ + /* + * Misterious pin which makes the ethernet working + * The legacy board file requested this pin on boot + * (ETH_KS8851_QUART) and set it to high, similarly to + * the ENET_ENABLE pin. + * We could use gpio-hog to keep it high, but let's use + * it as a reset GPIO for ks8851. + */ + OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ + >; + }; }; &i2c1 { @@ -452,12 +478,16 @@ pinctrl-0 = <&mcspi1_pins>; eth@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_pins>; + compatible = "ks8851"; spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ vdd-supply = <&vdd_eth>; + reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; }; }; diff --git a/src/arm/orion5x-lacie-d2-network.dts b/src/arm/orion5x-lacie-d2-network.dts index 8c2449da6f00..422958d13d42 100644 --- a/src/arm/orion5x-lacie-d2-network.dts +++ b/src/arm/orion5x-lacie-d2-network.dts @@ -19,6 +19,7 @@ compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts index b545d0f228a5..0043e0040153 100644 --- a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -25,6 +25,7 @@ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/src/arm/orion5x-lswsgl.dts b/src/arm/orion5x-lswsgl.dts index 0d97ded66257..2fbc17d6dfa4 100644 --- a/src/arm/orion5x-lswsgl.dts +++ b/src/arm/orion5x-lswsgl.dts @@ -55,6 +55,7 @@ compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x8000000>; /* 128 MB */ }; diff --git a/src/arm/orion5x-maxtor-shared-storage-2.dts b/src/arm/orion5x-maxtor-shared-storage-2.dts index 0324cb54939d..0ca6208a267d 100644 --- a/src/arm/orion5x-maxtor-shared-storage-2.dts +++ b/src/arm/orion5x-maxtor-shared-storage-2.dts @@ -19,6 +19,7 @@ compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/src/arm/orion5x-netgear-wnr854t.dts b/src/arm/orion5x-netgear-wnr854t.dts index 9f6ae4e1de06..ea081afa469d 100644 --- a/src/arm/orion5x-netgear-wnr854t.dts +++ b/src/arm/orion5x-netgear-wnr854t.dts @@ -21,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; /* 32 MB */ }; diff --git a/src/arm/orion5x-rd88f5182-nas.dts b/src/arm/orion5x-rd88f5182-nas.dts index d1817af53e0b..487324f7c54e 100644 --- a/src/arm/orion5x-rd88f5182-nas.dts +++ b/src/arm/orion5x-rd88f5182-nas.dts @@ -16,6 +16,7 @@ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; memory { + device_type = "memory"; reg = <0x00000000 0x4000000>; /* 64 MB */ }; diff --git a/src/arm/orion5x.dtsi b/src/arm/orion5x.dtsi index fbccfbbab223..61e631b3fd8b 100644 --- a/src/arm/orion5x.dtsi +++ b/src/arm/orion5x.dtsi @@ -6,11 +6,11 @@ * warranty of any kind, whether express or implied. */ -#include "skeleton.dtsi" - #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell Orion5x SoC"; compatible = "marvell,orion5x"; interrupt-parent = <&intc>; diff --git a/src/arm/ox810se.dtsi b/src/arm/ox810se.dtsi index c2b48a1838eb..3a26650de4eb 100644 --- a/src/arm/ox810se.dtsi +++ b/src/arm/ox810se.dtsi @@ -6,11 +6,12 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include #include / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox810se"; cpus { @@ -25,6 +26,7 @@ }; memory { + device_type = "memory"; /* Max 256MB @ 0x48000000 */ reg = <0x48000000 0x10000000>; }; diff --git a/src/arm/ox820.dtsi b/src/arm/ox820.dtsi index 085bbd33eadc..f3239586f38d 100644 --- a/src/arm/ox820.dtsi +++ b/src/arm/ox820.dtsi @@ -6,12 +6,13 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; compatible = "oxsemi,ox820"; cpus { @@ -35,6 +36,7 @@ }; memory { + device_type = "memory"; /* Max 512MB @ 0x60000000 */ reg = <0x60000000 0x20000000>; }; diff --git a/src/arm/picoxcell-pc3x2.dtsi b/src/arm/picoxcell-pc3x2.dtsi index a1266cf8776c..291a28f34762 100644 --- a/src/arm/picoxcell-pc3x2.dtsi +++ b/src/arm/picoxcell-pc3x2.dtsi @@ -10,7 +10,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X2"; compatible = "picochip,pc3x2"; diff --git a/src/arm/picoxcell-pc3x3.dtsi b/src/arm/picoxcell-pc3x3.dtsi index d78cd207eca1..bf9a39ea76b0 100644 --- a/src/arm/picoxcell-pc3x3.dtsi +++ b/src/arm/picoxcell-pc3x3.dtsi @@ -10,7 +10,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { model = "Picochip picoXcell PC3X3"; compatible = "picochip,pc3x3"; diff --git a/src/arm/prima2-evb.dts b/src/arm/prima2-evb.dts index 57286b4e7b87..55594b3bbc99 100644 --- a/src/arm/prima2-evb.dts +++ b/src/arm/prima2-evb.dts @@ -15,6 +15,7 @@ compatible = "sirf,prima2", "sirf,prima2-cb"; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/src/arm/prima2.dtsi b/src/arm/prima2.dtsi index 1ca1a9aa953f..54d4f8850e22 100644 --- a/src/arm/prima2.dtsi +++ b/src/arm/prima2.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" / { compatible = "sirf,prima2"; #address-cells = <1>; diff --git a/src/arm/pxa168.dtsi b/src/arm/pxa168.dtsi index b899e25cbb1b..7137f3550183 100644 --- a/src/arm/pxa168.dtsi +++ b/src/arm/pxa168.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/src/arm/pxa2xx.dtsi b/src/arm/pxa2xx.dtsi index e83879d97aea..bd6bf6d9300f 100644 --- a/src/arm/pxa2xx.dtsi +++ b/src/arm/pxa2xx.dtsi @@ -6,7 +6,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" #define PMGROUP(pin) #pin @@ -29,6 +28,8 @@ } / { + #address-cells = <1>; + #size-cells = <1>; model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; interrupt-parent = <&pxairq>; diff --git a/src/arm/pxa910.dtsi b/src/arm/pxa910.dtsi index 0868f6729be1..c88553a8ee29 100644 --- a/src/arm/pxa910.dtsi +++ b/src/arm/pxa910.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; diff --git a/src/arm/qcom-apq8060-dragonboard.dts b/src/arm/qcom-apq8060-dragonboard.dts index 497bb065eb9d..4e6c50d45cb2 100644 --- a/src/arm/qcom-apq8060-dragonboard.dts +++ b/src/arm/qcom-apq8060-dragonboard.dts @@ -93,9 +93,8 @@ vdd-supply = <&pm8058_l14>; // 2.85V aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>; capella,aset-resistance-ohms = <100000>; - /* GPIO34 has interrupt 225 on the PM8058 */ /* Trig on both edges - getting close or far away */ - interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ io-channels = <&xoadc 0x00 0x05>; io-channel-names = "aout"; @@ -515,9 +514,8 @@ ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <224 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <33 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; vid-supply = <&pm8058_lvs0>; // 1.8V @@ -526,9 +524,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058>; - interrupts = <207 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&pm8058_gpio>; + interrupts = <16 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&dragon_bmp085_gpios>; @@ -539,12 +536,11 @@ compatible = "invensense,mpu3050"; reg = <0x68>; /* - * GPIO17 has interrupt 208 on the - * PM8058, it is pulled high by a 10k + * GPIO17 is pulled high by a 10k * resistor to VLOGIC so needs to be * active low/falling edge. */ - interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_mpu3050_gpios>; vlogic-supply = <&pm8058_lvs0>; // 1.8V @@ -589,11 +585,10 @@ compatible = "smsc,lan9221", "smsc,lan9115"; reg = <2 0x0 0x100>; /* - * GPIO7 has interrupt 198 on the PM8058 * The second interrupt is the PME interrupt * for network wakeup, connected to the TLMM. */ - interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>, + interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>, <&tlmm 29 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; vdd33a-supply = <&dragon_veth>; diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi index 48c3cf427610..bd6907db615b 100644 --- a/src/arm/qcom-apq8064.dtsi +++ b/src/arm/qcom-apq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include #include #include @@ -10,6 +9,8 @@ #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; interrupt-parent = <&intc>; @@ -94,6 +95,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -705,50 +711,8 @@ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi index 899f28533ed7..0a0fb147ebb9 100644 --- a/src/arm/qcom-apq8084.dtsi +++ b/src/arm/qcom-apq8084.dtsi @@ -1,12 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" - #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm APQ 8084"; compatible = "qcom,apq8084"; interrupt-parent = <&intc>; @@ -87,6 +87,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + firmware { scm { compatible = "qcom,scm"; diff --git a/src/arm/qcom-ipq4019.dtsi b/src/arm/qcom-ipq4019.dtsi index 2d56008d8d6b..9e75f97770ce 100644 --- a/src/arm/qcom-ipq4019.dtsi +++ b/src/arm/qcom-ipq4019.dtsi @@ -13,12 +13,14 @@ /dts-v1/; -#include "skeleton.dtsi" #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; + model = "Qualcomm Technologies, Inc. IPQ4019"; compatible = "qcom,ipq4019"; interrupt-parent = <&intc>; @@ -133,6 +135,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + pmu { compatible = "arm,cortex-a7-pmu"; interrupts = ; - interrupts = ; + interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/src/arm/qcom-ipq8064.dtsi b/src/arm/qcom-ipq8064.dtsi index f793cd1ad6d0..16c0da97932c 100644 --- a/src/arm/qcom-ipq8064.dtsi +++ b/src/arm/qcom-ipq8064.dtsi @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -#include "skeleton.dtsi" #include #include #include @@ -11,6 +10,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm IPQ8064"; compatible = "qcom,ipq8064"; interrupt-parent = <&intc>; @@ -45,6 +46,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = ; }; }; diff --git a/src/arm/qcom-mdm9615.dtsi b/src/arm/qcom-mdm9615.dtsi index c852b69229c9..02afc6a42005 100644 --- a/src/arm/qcom-mdm9615.dtsi +++ b/src/arm/qcom-mdm9615.dtsi @@ -45,8 +45,6 @@ /dts-v1/; -/include/ "skeleton.dtsi" - #include #include #include @@ -54,6 +52,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MDM9615"; compatible = "qcom,mdm9615"; interrupt-parent = <&intc>; @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi index 70698941f64c..65a994f0e09b 100644 --- a/src/arm/qcom-msm8660.dtsi +++ b/src/arm/qcom-msm8660.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8660"; compatible = "qcom,msm8660"; interrupt-parent = <&intc>; @@ -39,6 +39,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,scorpion-mp-pmu"; interrupts = <1 9 0x304>; @@ -133,6 +138,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -140,7 +146,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16540000 0x1000>, <0x16500000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -149,7 +155,7 @@ gsbi6_i2c: i2c@16580000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16580000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -167,6 +173,7 @@ #address-cells = <1>; #size-cells = <1>; ranges; + status = "disabled"; syscon-tcsr = <&tcsr>; @@ -174,7 +181,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -183,7 +190,7 @@ gsbi7_i2c: i2c@16680000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16680000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -207,7 +214,7 @@ gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19880000 0x1000>; - interrupts = ; + interrupts = ; clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -232,7 +239,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 IRQ_TYPE_NONE>; + interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -241,7 +248,7 @@ gsbi12_i2c: i2c@19c80000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x19c80000 0x1000>; - interrupts = <0 196 IRQ_TYPE_NONE>; + interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -285,51 +292,8 @@ compatible = "qcom,pm8058-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupt-parent = <&pm8058>; - interrupts = <192 IRQ_TYPE_NONE>, - <193 IRQ_TYPE_NONE>, - <194 IRQ_TYPE_NONE>, - <195 IRQ_TYPE_NONE>, - <196 IRQ_TYPE_NONE>, - <197 IRQ_TYPE_NONE>, - <198 IRQ_TYPE_NONE>, - <199 IRQ_TYPE_NONE>, - <200 IRQ_TYPE_NONE>, - <201 IRQ_TYPE_NONE>, - <202 IRQ_TYPE_NONE>, - <203 IRQ_TYPE_NONE>, - <204 IRQ_TYPE_NONE>, - <205 IRQ_TYPE_NONE>, - <206 IRQ_TYPE_NONE>, - <207 IRQ_TYPE_NONE>, - <208 IRQ_TYPE_NONE>, - <209 IRQ_TYPE_NONE>, - <210 IRQ_TYPE_NONE>, - <211 IRQ_TYPE_NONE>, - <212 IRQ_TYPE_NONE>, - <213 IRQ_TYPE_NONE>, - <214 IRQ_TYPE_NONE>, - <215 IRQ_TYPE_NONE>, - <216 IRQ_TYPE_NONE>, - <217 IRQ_TYPE_NONE>, - <218 IRQ_TYPE_NONE>, - <219 IRQ_TYPE_NONE>, - <220 IRQ_TYPE_NONE>, - <221 IRQ_TYPE_NONE>, - <222 IRQ_TYPE_NONE>, - <223 IRQ_TYPE_NONE>, - <224 IRQ_TYPE_NONE>, - <225 IRQ_TYPE_NONE>, - <226 IRQ_TYPE_NONE>, - <227 IRQ_TYPE_NONE>, - <228 IRQ_TYPE_NONE>, - <229 IRQ_TYPE_NONE>, - <230 IRQ_TYPE_NONE>, - <231 IRQ_TYPE_NONE>, - <232 IRQ_TYPE_NONE>, - <233 IRQ_TYPE_NONE>, - <234 IRQ_TYPE_NONE>, - <235 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi index 1733d8f40ab1..f2aeaccdc1ad 100644 --- a/src/arm/qcom-msm8960.dtsi +++ b/src/arm/qcom-msm8960.dtsi @@ -1,14 +1,14 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" - #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8960"; compatible = "qcom,msm8960"; interrupt-parent = <&intc>; @@ -44,6 +44,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 10 0x304>; diff --git a/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index 51444c53fc72..b3b04736a159 100644 --- a/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -220,6 +220,20 @@ }; }; }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; }; &soc { @@ -242,6 +256,30 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -283,6 +321,32 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -342,6 +406,24 @@ }; }; + i2c@f9923000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -359,6 +441,31 @@ amstaos,proximity-diodes = <0>; }; }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; }; &spmi_bus { @@ -371,6 +478,29 @@ bias-pull-up; power-source = ; }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = ; + }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; }; }; }; diff --git a/src/arm/qcom-msm8974.dtsi b/src/arm/qcom-msm8974.dtsi index ca266a5f021d..45b5c8ef0374 100644 --- a/src/arm/qcom-msm8974.dtsi +++ b/src/arm/qcom-msm8974.dtsi @@ -6,9 +6,10 @@ #include #include #include -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; model = "Qualcomm MSM8974"; compatible = "qcom,msm8974"; interrupt-parent = <&intc>; @@ -130,6 +131,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + thermal-zones { cpu-thermal0 { polling-delay-passive = <250>; @@ -706,6 +712,17 @@ interrupts = ; }; + i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; diff --git a/src/arm/qcom-pm8941.dtsi b/src/arm/qcom-pm8941.dtsi index 2515c5c217ac..f198480c8ef4 100644 --- a/src/arm/qcom-pm8941.dtsi +++ b/src/arm/qcom-pm8941.dtsi @@ -63,43 +63,10 @@ compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8941_gpios 0 0 36>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>, - <0 0xda 0 IRQ_TYPE_NONE>, - <0 0xdb 0 IRQ_TYPE_NONE>, - <0 0xdc 0 IRQ_TYPE_NONE>, - <0 0xdd 0 IRQ_TYPE_NONE>, - <0 0xde 0 IRQ_TYPE_NONE>, - <0 0xdf 0 IRQ_TYPE_NONE>, - <0 0xe0 0 IRQ_TYPE_NONE>, - <0 0xe1 0 IRQ_TYPE_NONE>, - <0 0xe2 0 IRQ_TYPE_NONE>, - <0 0xe3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; boost_bypass_n_pin: boost-bypass { pins = "gpio21"; diff --git a/src/arm/qcom-pma8084.dtsi b/src/arm/qcom-pma8084.dtsi index aac7e73b6872..8f5ea7add20f 100644 --- a/src/arm/qcom-pma8084.dtsi +++ b/src/arm/qcom-pma8084.dtsi @@ -32,28 +32,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pma8084_mpps: mpps@a000 { diff --git a/src/arm/r7s9210-rza2mevb.dts b/src/arm/r7s9210-rza2mevb.dts new file mode 100644 index 000000000000..991e09de1219 --- /dev/null +++ b/src/arm/r7s9210-rza2mevb.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZA2MEVB board + * + * Copyright (C) 2018 Renesas Electronics + * + */ + +/dts-v1/; +#include "r7s9210.dtsi" +#include +#include + +/ { + model = "RZA2MEVB"; + compatible = "renesas,rza2mevb", "renesas,r7s9210"; + + aliases { + serial0 = &scif4; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; + }; + green { + gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* EXTAL */ +&extal_clk { + clock-frequency = <24000000>; /* 24MHz */ +}; + +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; +}; + +&pinctrl { + /* Serial Console */ + scif4_pins: serial4 { + pinmux = , /* TxD4 */ + ; /* RxD4 */ + }; +}; + +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; +}; + +/* Serial Console */ +&scif4 { + pinctrl-names = "default"; + pinctrl-0 = <&scif4_pins>; + + status = "okay"; +}; diff --git a/src/arm/r7s9210.dtsi b/src/arm/r7s9210.dtsi new file mode 100644 index 000000000000..22baa96f5974 --- /dev/null +++ b/src/arm/r7s9210.dtsi @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R7S9210 SoC + * + * Copyright (C) 2018 Renesas Electronics Corporation + * + */ + +#include +#include + +/ { + compatible = "renesas,r7s9210"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* Value must be set by board */ + clock-frequency = <0>; + }; + + rtc_x1_clk: rtc_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (32678) must be set by board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + clock-frequency = <528000000>; + next-level-cache = <&L2>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: cache-controller@1f003000 { + compatible = "arm,pl310-cache"; + reg = <0x1f003000 0x1000>; + interrupts = ; + arm,early-bresp-disable; + arm,full-line-zero-disable; + cache-unified; + cache-level = <2>; + }; + + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007000 0x18>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 47>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8007800 0x18>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 46>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008000 0x18>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 45>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8008800 0x18>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 44>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s9210"; + reg = <0xe8009000 0x18>; + interrupts = , + , + , + , + , + ; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD 43>; + clock-names = "fck"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@e803b000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803b000 0x30>; + interrupts = ; + clocks = <&cpg CPG_MOD 36>; + clock-names = "ostm0"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@e803c000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803c000 0x30>; + interrupts = ; + clocks = <&cpg CPG_MOD 35>; + clock-names = "ostm1"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@e803d000 { + compatible = "renesas,r7s9210-ostm", "renesas,ostm"; + reg = <0xe803d000 0x30>; + interrupts = ; + clocks = <&cpg CPG_MOD 34>; + clock-names = "ostm2"; + power-domains = <&cpg>; + status = "disabled"; + }; + + gic: interrupt-controller@e8221000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8221000 0x1000>, + <0xe8222000 0x1000>; + }; + + cpg: clock-controller@fcfe0010 { + compatible = "renesas,r7s9210-cpg-mssr"; + reg = <0xfcfe0010 0x455>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + wdt: watchdog@fcfe7000 { + compatible = "renesas,r7s9210-wdt", "renesas,rza-wdt"; + reg = <0xfcfe7000 0x26>; + interrupts = ; + clocks = <&cpg CPG_CORE R7S9210_CLK_P0>; + }; + + bsid: chipid@fcfe8004 { + compatible = "renesas,bsid"; + reg = <0xfcfe8004 4>; + }; + + pinctrl: pin-controller@fcffe000 { + compatible = "renesas,r7s9210-pinctrl"; + reg = <0xfcffe000 0x1000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 176>; + }; + }; +}; diff --git a/src/arm/r8a7743.dtsi b/src/arm/r8a7743.dtsi index 3adc158a40bb..de981d629bdd 100644 --- a/src/arm/r8a7743.dtsi +++ b/src/arm/r8a7743.dtsi @@ -15,25 +15,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &iic0; - i2c7 = &iic1; - i2c8 = &iic3; - spi0 = &qspi; - spi1 = &msiof0; - spi2 = &msiof1; - spi3 = &msiof2; - vin0 = &vin0; - vin1 = &vin1; - vin2 = &vin2; - }; - /* * The external audio clocks are configured as 0 Hz fixed frequency * clocks by default. @@ -154,6 +135,16 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7743-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7743", "renesas,rcar-gen2-gpio"; @@ -310,16 +301,6 @@ reg = <0 0xe6160000 0 0x100>; }; - rwdt: watchdog@e6020000 { - compatible = "renesas,r8a7743-wdt", - "renesas,rcar-gen2-wdt"; - reg = <0 0xe6020000 0 0x0c>; - clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; - resets = <&cpg 402>; - status = "disabled"; - }; - sysc: system-controller@e6180000 { compatible = "renesas,r8a7743-sysc"; reg = <0 0xe6180000 0 0x200>; @@ -564,9 +545,7 @@ /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,iic-r8a7743", - "renesas,rcar-gen2-iic", - "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7743"; reg = <0 0xe60b0000 0 0x425>; interrupts = ; clocks = <&cpg CPG_MOD 926>; diff --git a/src/arm/r8a7744.dtsi b/src/arm/r8a7744.dtsi index 04148d608fc4..fa74a262107b 100644 --- a/src/arm/r8a7744.dtsi +++ b/src/arm/r8a7744.dtsi @@ -998,6 +998,54 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 000>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 000>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 208>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7744", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&cpg 205>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a7744", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1068,54 +1116,6 @@ status = "disabled"; }; - msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e20000 0 0x0064>; - interrupts = ; - clocks = <&cpg CPG_MOD 000>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>, - <&dmac1 0x51>, <&dmac1 0x52>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 000>; - status = "disabled"; - }; - - msiof1: spi@e6e10000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e10000 0 0x0064>; - interrupts = ; - clocks = <&cpg CPG_MOD 208>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>, - <&dmac1 0x55>, <&dmac1 0x56>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 208>; - status = "disabled"; - }; - - msiof2: spi@e6e00000 { - compatible = "renesas,msiof-r8a7744", - "renesas,rcar-gen2-msiof"; - reg = <0 0xe6e00000 0 0x0064>; - interrupts = ; - clocks = <&cpg CPG_MOD 205>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>, - <&dmac1 0x41>, <&dmac1 0x42>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - #address-cells = <1>; - #size-cells = <0>; - resets = <&cpg 205>; - status = "disabled"; - }; - can0: can@e6e80000 { compatible = "renesas,can-r8a7744", "renesas,rcar-gen2-can"; @@ -1589,33 +1589,6 @@ resets = <&cpg 408>; }; - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = ; - clocks = <&cpg CPG_MOD 131>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 131>; - }; - - vsp@fe930000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe930000 0 0x8000>; - interrupts = ; - clocks = <&cpg CPG_MOD 128>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 128>; - }; - - vsp@fe938000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe938000 0 0x8000>; - interrupts = ; - clocks = <&cpg CPG_MOD 127>; - power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; - resets = <&cpg 127>; - }; - pciec: pcie@fe000000 { compatible = "renesas,pcie-r8a7744", "renesas,pcie-rcar-gen2"; @@ -1644,9 +1617,42 @@ status = "disabled"; }; + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe928000 0 0x8000>; + interrupts = ; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + vsp@fe930000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe930000 0 0x8000>; + interrupts = ; + clocks = <&cpg CPG_MOD 128>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 128>; + }; + + vsp@fe938000 { + compatible = "renesas,vsp1"; + reg = <0 0xfe938000 0 0x8000>; + interrupts = ; + clocks = <&cpg CPG_MOD 127>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 127>; + }; + du: display@feb00000 { - reg = <0 0xfeb00000 0 0x40000>, - <0 0xfeb90000 0 0x1c>; + compatible = "renesas,du-r8a7744"; + reg = <0 0xfeb00000 0 0x40000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + status = "disabled"; ports { #address-cells = <1>; @@ -1660,10 +1666,36 @@ port@1 { reg = <1>; du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a7744-lvds"; + reg = <0 0xfeb90000 0 0x1c>; + clocks = <&cpg CPG_MOD 726>; + power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { }; }; }; - /* placeholder */ }; prr: chipid@ff000044 { diff --git a/src/arm/r8a77470-iwg23s-sbc.dts b/src/arm/r8a77470-iwg23s-sbc.dts index 40b7f98d6013..77d18242ef59 100644 --- a/src/arm/r8a77470-iwg23s-sbc.dts +++ b/src/arm/r8a77470-iwg23s-sbc.dts @@ -84,12 +84,30 @@ clock-frequency = <20000000>; }; +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii_tx_rx"; function = "avb"; }; + i2c3_pins: i2c3 { + groups = "i2c3_c"; + function = "i2c3"; + }; + mmc_pins_uhs: mmc_uhs { groups = "mmc_data8", "mmc_ctrl"; function = "mmc"; diff --git a/src/arm/r8a7778.dtsi b/src/arm/r8a7778.dtsi index 05db0ccad7a6..10d996d2941f 100644 --- a/src/arm/r8a7778.dtsi +++ b/src/arm/r8a7778.dtsi @@ -367,6 +367,30 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF0>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7778", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7778_CLK_HSCIF1>, + <&cpg_clocks R8A7778_CLK_S>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + mmcif: mmc@ffe4e000 { compatible = "renesas,mmcif-r8a7778", "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; @@ -535,6 +559,8 @@ <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, + <&cpg_clocks R8A7778_CLK_S>, + <&cpg_clocks R8A7778_CLK_S>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, <&cpg_clocks R8A7778_CLK_P>, @@ -551,6 +577,7 @@ R8A7778_CLK_SCIF0 R8A7778_CLK_SCIF1 R8A7778_CLK_SCIF2 R8A7778_CLK_SCIF3 R8A7778_CLK_SCIF4 R8A7778_CLK_SCIF5 + R8A7778_CLK_HSCIF0 R8A7778_CLK_HSCIF1 R8A7778_CLK_TMU0 R8A7778_CLK_TMU1 R8A7778_CLK_TMU2 R8A7778_CLK_SSI0 R8A7778_CLK_SSI1 R8A7778_CLK_SSI2 @@ -560,6 +587,7 @@ clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", + "hscif0", "hscif1", "tmu0", "tmu1", "tmu2", "ssi0", "ssi1", "ssi2", "ssi3", "sru", "hspi"; }; diff --git a/src/arm/r8a7779.dtsi b/src/arm/r8a7779.dtsi index 3bc133d9489c..3ff259207527 100644 --- a/src/arm/r8a7779.dtsi +++ b/src/arm/r8a7779.dtsi @@ -287,6 +287,32 @@ status = "disabled"; }; + hscif0: serial@ffe48000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe48000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF0>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + hscif1: serial@ffe49000 { + compatible = "renesas,hscif-r8a7779", + "renesas,rcar-gen1-hscif", "renesas,hscif"; + reg = <0xffe49000 96>; + interrupts = ; + clocks = <&mstp0_clks R8A7779_CLK_HSCIF1>, + <&cpg_clocks R8A7779_CLK_S>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + pfc: pin-controller@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; diff --git a/src/arm/r8a7790-stout.dts b/src/arm/r8a7790-stout.dts index 629da4cee1b9..7a7d3b84d1a6 100644 --- a/src/arm/r8a7790-stout.dts +++ b/src/arm/r8a7790-stout.dts @@ -94,9 +94,8 @@ status = "okay"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>, <&osc1_clk>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1", "dclkin.0"; + clock-names = "du.0", "du.1", "du.2", "dclkin.0"; ports { port@0 { @@ -104,11 +103,21 @@ remote-endpoint = <&adv7511_in>; }; }; + }; +}; + +&lvds0 { + ports { port@1 { lvds_connector0: endpoint { }; }; - port@2 { + }; +}; + +&lvds1 { + ports { + port@1 { lvds_connector1: endpoint { }; }; diff --git a/src/arm/rk3036-kylin.dts b/src/arm/rk3036-kylin.dts index 0fd19f9723df..0173eb11ec28 100644 --- a/src/arm/rk3036-kylin.dts +++ b/src/arm/rk3036-kylin.dts @@ -310,7 +310,6 @@ }; &i2s { - #sound-dai-cells = <0>; status = "okay"; }; diff --git a/src/arm/rk3036.dtsi b/src/arm/rk3036.dtsi index d560fc4051c5..59c90863b0e7 100644 --- a/src/arm/rk3036.dtsi +++ b/src/arm/rk3036.dtsi @@ -289,6 +289,7 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; status = "disabled"; }; diff --git a/src/arm/rk3066a-bqcurie2.dts b/src/arm/rk3066a-bqcurie2.dts index 1c925f20dba0..0a56a2f1bc4d 100644 --- a/src/arm/rk3066a-bqcurie2.dts +++ b/src/arm/rk3066a-bqcurie2.dts @@ -171,7 +171,6 @@ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; bus-width = <4>; - disable-wp; }; &pwm3 { diff --git a/src/arm/rk3066a-mk808.dts b/src/arm/rk3066a-mk808.dts index b6a8a82d219e..9d2216d71f70 100644 --- a/src/arm/rk3066a-mk808.dts +++ b/src/arm/rk3066a-mk808.dts @@ -101,7 +101,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; pinctrl-names = "default"; diff --git a/src/arm/rk3066a-rayeager.dts b/src/arm/rk3066a-rayeager.dts index cd126b927ba8..949fa800582d 100644 --- a/src/arm/rk3066a-rayeager.dts +++ b/src/arm/rk3066a-rayeager.dts @@ -147,7 +147,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; @@ -309,7 +308,6 @@ &mmc1 { bus-width = <4>; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; diff --git a/src/arm/rk3066a.dtsi b/src/arm/rk3066a.dtsi index 30dc8af0bdcb..653127a377fa 100644 --- a/src/arm/rk3066a.dtsi +++ b/src/arm/rk3066a.dtsi @@ -44,6 +44,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; @@ -57,6 +62,48 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010c000 0x19c>; + interrupts = ; + clocks = <&cru ACLK_LCDC0>, + <&cru DCLK_LCDC0>, + <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC0_AXI>, + <&cru SRST_LCDC0_AHB>, + <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3066-vop"; + reg = <0x1010e000 0x19c>; + interrupts = ; + clocks = <&cru ACLK_LCDC1>, + <&cru DCLK_LCDC1>, + <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3066_PD_VIO>; + resets = <&cru SRST_LCDC1_AXI>, + <&cru SRST_LCDC1_AHB>, + <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2s0: i2s@10118000 { compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; @@ -669,6 +716,7 @@ <&cru SCLK_CIF0>, <&cru ACLK_CIF0>, <&cru HCLK_CIF0>, + <&cru HCLK_HDMI>, <&cru ACLK_IPP>, <&cru HCLK_IPP>, <&cru ACLK_RGA>, diff --git a/src/arm/rk3188-bqedison2qc.dts b/src/arm/rk3188-bqedison2qc.dts index a7477a09fbe8..c8b62bbd6a4a 100644 --- a/src/arm/rk3188-bqedison2qc.dts +++ b/src/arm/rk3188-bqedison2qc.dts @@ -227,7 +227,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd>; @@ -408,6 +407,21 @@ &i2c2 { clock-frequency = <400000>; status = "okay"; + + ft5606: touchscreen@3e { + compatible = "edt,edt-ft5506"; + reg = <0x3e>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int &tp_rst>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + /* hw ts resolution does not match display */ + touchscreen-size-y = <1024>; + touchscreen-size-x = <768>; + touchscreen-swapped-x-y; + }; }; &i2c3 { @@ -446,7 +460,6 @@ &mmc1 { bus-width = <4>; cap-sd-highspeed; - cap-mmc-highspeed; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; @@ -526,7 +539,7 @@ }; cif1_pdn: cif1-pdn { - rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; cif_avdd_en: cif-avdd-en { diff --git a/src/arm/rk3188-px3-evb.dts b/src/arm/rk3188-px3-evb.dts index 9ae65c767c90..c0eaa9c5490b 100644 --- a/src/arm/rk3188-px3-evb.dts +++ b/src/arm/rk3188-px3-evb.dts @@ -62,7 +62,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; diff --git a/src/arm/rk3229-evb.dts b/src/arm/rk3229-evb.dts index 4df7accc3ad7..350497a3ca86 100644 --- a/src/arm/rk3229-evb.dts +++ b/src/arm/rk3229-evb.dts @@ -137,7 +137,6 @@ &emmc { cap-mmc-highspeed; - disable-wp; non-removable; status = "okay"; }; diff --git a/src/arm/rk3288-fennec.dts b/src/arm/rk3288-fennec.dts index b1b56dfdfdba..29af26e6d442 100644 --- a/src/arm/rk3288-fennec.dts +++ b/src/arm/rk3288-fennec.dts @@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/src/arm/rk3288-firefly-reload.dts b/src/arm/rk3288-firefly-reload.dts index 58ea8bed040a..3a646c5f4fcf 100644 --- a/src/arm/rk3288-firefly-reload.dts +++ b/src/arm/rk3288-firefly-reload.dts @@ -254,7 +254,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/src/arm/rk3288-miqi.dts b/src/arm/rk3288-miqi.dts index 504ab1177aa7..fb7365b604bb 100644 --- a/src/arm/rk3288-miqi.dts +++ b/src/arm/rk3288-miqi.dts @@ -87,7 +87,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; diff --git a/src/arm/rk3288-popmetal.dts b/src/arm/rk3288-popmetal.dts index 596435e03132..6a51940398b5 100644 --- a/src/arm/rk3288-popmetal.dts +++ b/src/arm/rk3288-popmetal.dts @@ -109,7 +109,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; diff --git a/src/arm/rk3288-rock2-square.dts b/src/arm/rk3288-rock2-square.dts index 6a30cadad88a..5b7e1c9e92e1 100644 --- a/src/arm/rk3288-rock2-square.dts +++ b/src/arm/rk3288-rock2-square.dts @@ -133,7 +133,6 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - disable-wp; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/src/arm/rk3288-tinker-s.dts b/src/arm/rk3288-tinker-s.dts index 37093922b482..d97da89bcd51 100644 --- a/src/arm/rk3288-tinker-s.dts +++ b/src/arm/rk3288-tinker-s.dts @@ -15,7 +15,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/src/arm/rk3288-tinker.dtsi b/src/arm/rk3288-tinker.dtsi index aa107ee41b8b..ef653c3209bc 100644 --- a/src/arm/rk3288-tinker.dtsi +++ b/src/arm/rk3288-tinker.dtsi @@ -254,6 +254,7 @@ }; vccio_sd: LDO_REG5 { + regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; @@ -430,7 +431,7 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - card-detect-delay = <200>; + broken-cd; disable-wp; /* wp not hooked up */ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; diff --git a/src/arm/rk3288-veyron.dtsi b/src/arm/rk3288-veyron.dtsi index d8bf939a3aff..192dbc089ade 100644 --- a/src/arm/rk3288-veyron.dtsi +++ b/src/arm/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + chosen { + stdout-path = "serial2:115200n8"; + }; + /* * The default coreboot on veyron devices ignores memory@0 nodes * and would instead create another memory node. @@ -21,8 +25,6 @@ gpio_keys: gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; diff --git a/src/arm/rk3288-vyasa.dts b/src/arm/rk3288-vyasa.dts index 4856a9fc0aea..40b232eb5011 100644 --- a/src/arm/rk3288-vyasa.dts +++ b/src/arm/rk3288-vyasa.dts @@ -121,7 +121,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi index ca7d52daa8fb..a024d1e7e74c 100644 --- a/src/arm/rk3288.dtsi +++ b/src/arm/rk3288.dtsi @@ -70,7 +70,7 @@ compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -80,7 +80,7 @@ compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -90,7 +90,7 @@ compatible = "arm,cortex-a12"; reg = <0x503>; resets = <&cru SRST_CORE3>; - operating-points = <&cpu_opp_table>; + operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; /* min followed by max */ clock-latency = <40000>; clocks = <&cru ARMCLK>; @@ -1119,8 +1119,6 @@ clock-names = "ref", "pclk"; power-domains = <&power RK3288_PD_VIO>; rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; ports { @@ -1282,27 +1280,27 @@ gpu_opp_table: gpu-opp-table { compatible = "operating-points-v2"; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <950000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <950000>; }; - opp@300000000 { + opp-300000000 { opp-hz = /bits/ 64 <300000000>; opp-microvolt = <1000000>; }; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <1200000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; }; diff --git a/src/arm/rv1108-elgin-r1.dts b/src/arm/rv1108-elgin-r1.dts new file mode 100644 index 000000000000..1c4507b66fdd --- /dev/null +++ b/src/arm/rv1108-elgin-r1.dts @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright (C) 2018 O.S. Systems Software LTDA. + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Elgin RV1108 R1 board"; + compatible = "elgin,rv1108-r1", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + no-sd; + no-sdio; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <275>; + i2c-scl-falling-time-ns = <16>; + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = ; + rockchip,system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vdd_buck2>; + vcc6-supply = <&vdd_buck2>; + + regulators { + vdd_core: DCDC_REG1 { + regulator-name= "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_buck2: DCDC_REG2 { + regulator-name= "vdd_buck2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name= "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name= "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG1 { + regulator-name= "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG2 { + regulator-name= "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd10_pmu: LDO_REG3 { + regulator-name= "vdd10_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; + status = "okay"; + + dh2228fv: dac@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; diff --git a/src/arm/rv1108-evb.dts b/src/arm/rv1108-evb.dts index 203d83e3bbf5..30f3d0470ad9 100644 --- a/src/arm/rv1108-evb.dts +++ b/src/arm/rv1108-evb.dts @@ -97,8 +97,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <900000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -107,7 +107,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <2000000>; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -116,7 +116,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; + regulator-on-in-suspend; }; }; @@ -127,8 +127,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <3300000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; }; }; @@ -139,7 +139,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -150,7 +150,7 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-disabled; + regulator-off-in-suspend; }; }; @@ -161,8 +161,8 @@ regulator-always-on; regulator-boot-on; regulator-state-mem { - regulator-state-enabled; - regulator-state-uv = <1000000>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; }; }; }; diff --git a/src/arm/rv1108.dtsi b/src/arm/rv1108.dtsi index d31370ff28f4..f47ac86d2852 100644 --- a/src/arm/rv1108.dtsi +++ b/src/arm/rv1108.dtsi @@ -207,6 +207,7 @@ clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; @@ -833,6 +834,42 @@ }; }; + spim0 { + spim0_clk: spim0-clk { + rockchip,pins = <1 RK_PD0 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_cs0: spim0-cs0 { + rockchip,pins = <1 RK_PD1 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_tx: spim0-tx { + rockchip,pins = <1 RK_PD3 RK_FUNC_2 &pcfg_pull_up>; + }; + + spim0_rx: spim0-rx { + rockchip,pins = <1 RK_PD2 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + spim1 { + spim1_clk: spim1-clk { + rockchip,pins = <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_cs0: spim1-cs0 { + rockchip,pins = <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_rx: spim1-rx { + rockchip,pins = <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + }; + + spim1_tx: spim1-tx { + rockchip,pins = <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + tsadc { otp_out: otp-out { rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>; diff --git a/src/arm/s3c2416-smdk2416.dts b/src/arm/s3c2416-smdk2416.dts index 5164386aff3a..cb371bf72f64 100644 --- a/src/arm/s3c2416-smdk2416.dts +++ b/src/arm/s3c2416-smdk2416.dts @@ -19,9 +19,12 @@ clocks { compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - xti: xti { + xti: xti@0 { compatible = "fixed-clock"; + reg = <0>; clock-frequency = <12000000>; clock-output-names = "xti"; #clock-cells = <0>; diff --git a/src/arm/s5pv210-aries.dtsi b/src/arm/s5pv210-aries.dtsi index 575094ea7024..8ff70b856334 100644 --- a/src/arm/s5pv210-aries.dtsi +++ b/src/arm/s5pv210-aries.dtsi @@ -23,6 +23,31 @@ 0x50000000 0x08000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x2000000>; + }; + + mfc_right: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x2000000>; + }; + }; + + vibrator_pwr: regulator-fixed-0 { + compatible = "regulator-fixed"; + regulator-name = "vibrator-en"; + enable-active-high; + gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; @@ -296,6 +321,22 @@ reg = <0x36>; }; }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm 1 44642 0>; + pwm-names = "enable"; + vcc-supply = <&vibrator_pwr>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; + }; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_syscon>; + offset = <0x681c>; /* PS_HOLD_CONTROL */ + value = <0x5200>; + }; }; &fimd { @@ -329,6 +370,27 @@ status = "okay"; }; +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>; + reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; + &pinctrl0 { wlan_bt_en: wlan-bt-en { samsung,pins = "gpb-5"; @@ -350,6 +412,13 @@ samsung,pin-drv = ; }; + bt_host_wake: bt-host-wake { + samsung,pins = "gph2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + tf_detect: tf-detect { samsung,pins = "gph3-4"; samsung,pin-function = ; @@ -362,6 +431,17 @@ samsung,pin-function = ; samsung,pin-pud = ; }; + + ts_irq: ts-irq { + samsung,pins = "gpj0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; +}; + +&pwm { + samsung,pwm-outputs = <1>; }; &sdhci1 { @@ -399,6 +479,16 @@ &uart0 { status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <115200>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>; + shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>; + }; }; &uart1 { diff --git a/src/arm/s5pv210-fascinate4g.dts b/src/arm/s5pv210-fascinate4g.dts index ccf761b1babf..07a8d9bbe5b8 100644 --- a/src/arm/s5pv210-fascinate4g.dts +++ b/src/arm/s5pv210-fascinate4g.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; }; gpio-keys { diff --git a/src/arm/s5pv210-galaxys.dts b/src/arm/s5pv210-galaxys.dts index 842276749717..cf161bbfbacf 100644 --- a/src/arm/s5pv210-galaxys.dts +++ b/src/arm/s5pv210-galaxys.dts @@ -11,13 +11,6 @@ chosen { stdout-path = &uart2; - /* - * It's hard to change those parameters in stock bootloader, - * since it requires special hardware/cable. - * Let's hardocde bootargs for now, till u-boot port is finished, - * with which it should be easier. - */ - bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk"; }; nand_pwrseq: nand-pwrseq { diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi index 12eac8930eac..a44d5eb56bed 100644 --- a/src/arm/s5pv210.dtsi +++ b/src/arm/s5pv210.dtsi @@ -25,6 +25,8 @@ aliases { csis0 = &csis0; + dmc0 = &dmc0; + dmc1 = &dmc1; fimc0 = &fimc0; fimc1 = &fimc1; fimc2 = &fimc2; @@ -78,7 +80,7 @@ }; }; - onenand: onenand@b0000000 { + onenand: onenand@b0600000 { compatible = "samsung,s5pv210-onenand"; reg = <0xb0600000 0x2000>, <0xb0000000 0x20000>, @@ -511,7 +513,7 @@ }; fimd: fimd@f8000000 { - compatible = "samsung,exynos4210-fimd"; + compatible = "samsung,s5pv210-fimd"; interrupt-parent = <&vic2>; reg = <0xf8000000 0x20000>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -521,6 +523,16 @@ status = "disabled"; }; + dmc0: dmc@f0000000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf0000000 0x1000>; + }; + + dmc1: dmc@f1400000 { + compatible = "samsung,s5pv210-dmc"; + reg = <0xf1400000 0x1000>; + }; + g2d: g2d@fa000000 { compatible = "samsung,s5pv210-g2d"; reg = <0xfa000000 0x1000>; @@ -542,6 +554,15 @@ #dma-requests = <1>; }; + rotator: rotator@fa300000 { + compatible = "samsung,s5pv210-rotator"; + reg = <0xfa300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <4>; + clocks = <&clocks CLK_ROTATOR>; + clock-names = "rotator"; + }; + i2c1: i2c@fab00000 { compatible = "samsung,s3c2440-i2c"; reg = <0xfab00000 0x1000>; diff --git a/src/arm/sama5d2-pinfunc.h b/src/arm/sama5d2-pinfunc.h index 1c01a6f843d8..28a2e45752fe 100644 --- a/src/arm/sama5d2-pinfunc.h +++ b/src/arm/sama5d2-pinfunc.h @@ -518,7 +518,7 @@ #define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) #define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3) #define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1) -#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 3, 1) #define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2) #define PIN_PC10 74 #define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) diff --git a/src/arm/sama5d2.dtsi b/src/arm/sama5d2.dtsi index dc2280d9127f..d159ee42ef29 100644 --- a/src/arm/sama5d2.dtsi +++ b/src/arm/sama5d2.dtsi @@ -43,13 +43,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D2 family SoC"; compatible = "atmel,sama5d2"; interrupt-parent = <&aic>; @@ -113,6 +114,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; diff --git a/src/arm/sama5d3.dtsi b/src/arm/sama5d3.dtsi index 1408fa4a62e4..02198772eb81 100644 --- a/src/arm/sama5d3.dtsi +++ b/src/arm/sama5d3.dtsi @@ -8,7 +8,6 @@ * Licensed under GPLv2 or later. */ -#include "skeleton.dtsi" #include #include #include @@ -16,6 +15,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D3 family SoC"; compatible = "atmel,sama5d3", "atmel,sama5"; interrupt-parent = <&aic>; @@ -56,6 +57,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x8000000>; }; diff --git a/src/arm/sama5d4.dtsi b/src/arm/sama5d4.dtsi index 2604fd07dd53..6c1e41f94549 100644 --- a/src/arm/sama5d4.dtsi +++ b/src/arm/sama5d4.dtsi @@ -43,7 +43,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include #include #include @@ -51,6 +50,8 @@ #include / { + #address-cells = <1>; + #size-cells = <1>; model = "Atmel SAMA5D4 family SoC"; compatible = "atmel,sama5d4"; interrupt-parent = <&aic>; @@ -90,6 +91,7 @@ }; memory { + device_type = "memory"; reg = <0x20000000 0x20000000>; }; diff --git a/src/arm/skeleton.dtsi b/src/arm/skeleton.dtsi deleted file mode 100644 index 34eda68d9ea2..000000000000 --- a/src/arm/skeleton.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * This file is deprecated, and will be removed once existing users have been - * updated. New dts{,i} files should *not* include skeleton.dtsi, and should - * instead explicitly provide the below nodes only as required. - * - * Skeleton device tree; the bare minimum needed to boot; just include and - * add a compatible value. The bootloader will typically populate the memory - * node. - */ - -/ { - #address-cells = <1>; - #size-cells = <1>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0>; }; -}; diff --git a/src/arm/skeleton64.dtsi b/src/arm/skeleton64.dtsi deleted file mode 100644 index 54e637752b9d..000000000000 --- a/src/arm/skeleton64.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Skeleton device tree in the 64 bits version; the bare minimum - * needed to boot; just include and add a compatible value. The - * bootloader will typically populate the memory node. - */ - -/ { - #address-cells = <2>; - #size-cells = <2>; - chosen { }; - aliases { }; - memory { device_type = "memory"; reg = <0 0 0 0>; }; -}; diff --git a/src/arm/socfpga.dtsi b/src/arm/socfpga.dtsi index dcb8fba3d709..ec1966480f2f 100644 --- a/src/arm/socfpga.dtsi +++ b/src/arm/socfpga.dtsi @@ -84,6 +84,7 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>; }; }; @@ -100,6 +101,7 @@ reg = <0xffc00000 0x1000>; interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; clocks = <&can0_clk>; + resets = <&rst CAN0_RESET>; status = "disabled"; }; @@ -108,6 +110,7 @@ reg = <0xffc01000 0x1000>; interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; clocks = <&can1_clk>; + resets = <&rst CAN1_RESET>; status = "disabled"; }; @@ -585,6 +588,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff708000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -605,6 +609,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff709000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -625,6 +630,7 @@ compatible = "snps,dw-apb-gpio"; reg = <0xff70a000 0x1000>; clocks = <&l4_mp_clk>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -735,6 +741,7 @@ #size-cells = <0>; clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -748,6 +755,7 @@ interrupts = <0x0 0x90 0x4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -767,6 +775,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -785,6 +794,7 @@ sdr: sdr@ffc25000 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffc25000 0x1000>; + resets = <&rst SDR_RESET>; }; sdramedac { @@ -801,6 +811,7 @@ interrupts = <0 154 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -812,6 +823,7 @@ interrupts = <0 155 4>; num-cs = <4>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -878,6 +890,7 @@ dmas = <&pdma 28>, <&pdma 29>; dma-names = "tx", "rx"; + resets = <&rst UART0_RESET>; }; uart1: serial1@ffc03000 { @@ -890,6 +903,7 @@ dmas = <&pdma 30>, <&pdma 31>; dma-names = "tx", "rx"; + resets = <&rst UART1_RESET>; }; usbphy0: usbphy { @@ -929,6 +943,7 @@ reg = <0xffd02000 0x1000>; interrupts = <0 171 4>; clocks = <&osc1>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -937,6 +952,7 @@ reg = <0xffd03000 0x1000>; interrupts = <0 172 4>; clocks = <&osc1>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/src/arm/socfpga_arria10.dtsi b/src/arm/socfpga_arria10.dtsi index e41fa23481c3..ae24599d5829 100644 --- a/src/arm/socfpga_arria10.dtsi +++ b/src/arm/socfpga_arria10.dtsi @@ -470,6 +470,7 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; + resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; @@ -480,6 +481,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02900 0x100>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -499,6 +501,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02a00 0x100>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -518,6 +521,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc02b00 0x100>; + resets = <&rst GPIO2_RESET>; status = "disabled"; portc: gpio-controller@0 { @@ -548,6 +552,7 @@ reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C0_RESET>; status = "disabled"; }; @@ -558,6 +563,7 @@ reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C1_RESET>; status = "disabled"; }; @@ -568,6 +574,7 @@ reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C2_RESET>; status = "disabled"; }; @@ -578,6 +585,7 @@ reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C3_RESET>; status = "disabled"; }; @@ -588,6 +596,7 @@ reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sp_clk>; + resets = <&rst I2C4_RESET>; status = "disabled"; }; @@ -600,6 +609,7 @@ num-cs = <4>; /*32bit_access;*/ clocks = <&spi_m_clk>; + resets = <&rst SPIM0_RESET>; status = "disabled"; }; @@ -614,6 +624,7 @@ tx-dma-channel = <&pdma 16>; rx-dma-channel = <&pdma 17>; clocks = <&spi_m_clk>; + resets = <&rst SPIM1_RESET>; status = "disabled"; }; @@ -642,6 +653,7 @@ fifo-depth = <0x400>; clocks = <&l4_mp_clk>, <&sdmmc_clk>; clock-names = "biu", "ciu"; + resets = <&rst SDMMC_RESET>; status = "disabled"; }; @@ -655,6 +667,7 @@ interrupts = <0 99 4>; clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>; status = "disabled"; }; @@ -739,6 +752,7 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; + resets = <&rst QSPI_RESET>; status = "disabled"; }; @@ -815,6 +829,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART0_RESET>; status = "disabled"; }; @@ -825,6 +840,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&l4_sp_clk>; + resets = <&rst UART1_RESET>; status = "disabled"; }; @@ -865,6 +881,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD0_RESET>; status = "disabled"; }; @@ -873,6 +890,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&l4_sys_free_clk>; + resets = <&rst L4WD1_RESET>; status = "disabled"; }; }; diff --git a/src/arm/socfpga_cyclone5_chameleon96.dts b/src/arm/socfpga_cyclone5_chameleon96.dts new file mode 100644 index 000000000000..f6561766d83f --- /dev/null +++ b/src/arm/socfpga_cyclone5_chameleon96.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for the Chameleon96 + * + * Copyright (c) 2018 Manivannan Sadhasivam + */ + +#include + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Novetech Chameleon96"; + compatible = "novtech,chameleon96", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x20000000>; /* 512MB */ + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "green:user1"; + gpios = <&porta 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + gpios = <&porta 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "green:user3"; + gpios = <&porta 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + user_led4 { + label = "green:user4"; + gpios = <&portb 3 GPIO_ACTIVE_LOW>; + panic-indicator; + linux,default-trigger = "none"; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&spi0 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&spi1 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&uart0 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&uart1 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/src/arm/spear13xx.dtsi b/src/arm/spear13xx.dtsi index 086b4b333249..390df643a174 100644 --- a/src/arm/spear13xx.dtsi +++ b/src/arm/spear13xx.dtsi @@ -11,9 +11,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; cpus { diff --git a/src/arm/spear3xx.dtsi b/src/arm/spear3xx.dtsi index 118135d75899..c47380763cae 100644 --- a/src/arm/spear3xx.dtsi +++ b/src/arm/spear3xx.dtsi @@ -11,9 +11,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&vic>; cpus { diff --git a/src/arm/spear600.dtsi b/src/arm/spear600.dtsi index 00166eb9be86..0a634fb07452 100644 --- a/src/arm/spear600.dtsi +++ b/src/arm/spear600.dtsi @@ -9,9 +9,9 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "st,spear600"; cpus { diff --git a/src/arm/ste-nomadik-nhk15.dts b/src/arm/ste-nomadik-nhk15.dts index 12afdc7467e7..04066f9cb8a3 100644 --- a/src/arm/ste-nomadik-nhk15.dts +++ b/src/arm/ste-nomadik-nhk15.dts @@ -1,7 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree for the ST-Ericsson Nomadik S8815 board - * Produced by Calao Systems + * Device Tree for the ST Microelectronics Nomadik NHK8815 board */ /dts-v1/; @@ -182,43 +181,12 @@ pinctrl-names = "default"; pinctrl-0 = <&clcd_24bit_mux>; port { - nomadik_clcd_pads: endpoint { + nomadik_clcd: endpoint { remote-endpoint = <&nomadik_clcd_panel>; arm,pl11x,tft-r0g0b0-pads = <16 8 0>; }; }; - /* - * WVGA connector 21 - * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB - * with TPO touch screen. - */ - panel { - compatible = "tpo,tpg110", "panel-dpi"; - grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; - scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; - backlight = <&bl>; - - port { - nomadik_clcd_panel: endpoint { - remote-endpoint = <&nomadik_clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <33200000>; - hactive = <800>; - hback-porch = <216>; - hfront-porch = <40>; - hsync-len = <1>; - vactive = <480>; - vback-porch = <35>; - vfront-porch = <10>; - vsync-len = <1>; - }; - }; }; /* Activate RX/TX and CTS/RTS on UART 0 */ @@ -233,6 +201,55 @@ }; }; + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * As we're dealing with 3wire SPI, we only define SCK + * and MOSI (in the spec MOSI is called "SDA"). + */ + gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + /* + * It's not actually active high, but the frameworks assume + * the polarity of the passed-in GPIO is "normal" (active + * high) then actively drives the line low to select the + * chip. + */ + cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + /* + * WVGA connector 21 + * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB + * with TPO touch screen. + */ + panel: display@0 { + /* + * The TPO display driver is connected to a + * 5.7" OSD OSD057VA01CT TFT display. + */ + compatible = "tpo,tpg110"; + reg = <0>; + spi-3wire; + /* 320 ns min period ~= 3 MHz */ + spi-max-frequency = <3000000>; + /* Width and height from the OSD data sheet */ + width-mm = <116>; + height-mm = <87>; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd>; + }; + }; + }; + }; + bl: backlight { compatible = "pwm-backlight"; pwms = <&stmpe0_pwm 0 500000>; diff --git a/src/arm/ste-nomadik-stn8815.dtsi b/src/arm/ste-nomadik-stn8815.dtsi index fca76a696d9d..f78b4eabd68c 100644 --- a/src/arm/ste-nomadik-stn8815.dtsi +++ b/src/arm/ste-nomadik-stn8815.dtsi @@ -4,13 +4,13 @@ */ #include -#include "skeleton.dtsi" / { #address-cells = <1>; #size-cells = <1>; memory { + device_type = "memory"; reg = <0x00000000 0x04000000>, <0x08000000 0x04000000>; }; diff --git a/src/arm/ste-u300.dts b/src/arm/ste-u300.dts index 1bd1aba3322f..f4e7660fead7 100644 --- a/src/arm/ste-u300.dts +++ b/src/arm/ste-u300.dts @@ -4,7 +4,6 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ST-Ericsson U300"; @@ -22,6 +21,7 @@ }; memory { + device_type = "memory"; reg = <0x48000000 0x03c00000>; }; diff --git a/src/arm/stm32429i-eval.dts b/src/arm/stm32429i-eval.dts index ed7d7f46465e..73ea84df7bf4 100644 --- a/src/arm/stm32429i-eval.dts +++ b/src/arm/stm32429i-eval.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x2000000>; }; diff --git a/src/arm/stm32746g-eval.dts b/src/arm/stm32746g-eval.dts index 8c081eaf20fe..d90b0d1e18c7 100644 --- a/src/arm/stm32746g-eval.dts +++ b/src/arm/stm32746g-eval.dts @@ -55,6 +55,7 @@ }; memory { + device_type = "memory"; reg = <0xc0000000 0x2000000>; }; diff --git a/src/arm/stm32f429-disco.dts b/src/arm/stm32f429-disco.dts index 5ceb2cf3777f..e19d0fe7dbda 100644 --- a/src/arm/stm32f429-disco.dts +++ b/src/arm/stm32f429-disco.dts @@ -60,6 +60,7 @@ }; memory { + device_type = "memory"; reg = <0x90000000 0x800000>; }; diff --git a/src/arm/stm32f429.dtsi b/src/arm/stm32f429.dtsi index 8d6f028ae285..588b6ef94e93 100644 --- a/src/arm/stm32f429.dtsi +++ b/src/arm/stm32f429.dtsi @@ -45,12 +45,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include #include / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -314,6 +316,26 @@ status = "disabled"; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI2)>; + status = "disabled"; + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(SPI3)>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; @@ -523,6 +545,26 @@ status = "disabled"; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI1)>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI4)>; + status = "disabled"; + }; + syscfg: system-config@40013800 { compatible = "syscon"; reg = <0x40013800 0x400>; @@ -587,6 +629,26 @@ }; }; + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; + status = "disabled"; + }; + + spi6: spi@40015400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f4-spi"; + reg = <0x40015400 0x400>; + interrupts = <86>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI6)>; + status = "disabled"; + }; + pwrcfg: power-config@40007000 { compatible = "syscon"; reg = <0x40007000 0x400>; diff --git a/src/arm/stm32f469-disco.dts b/src/arm/stm32f469-disco.dts index 7937b43d7788..a3ff04940aec 100644 --- a/src/arm/stm32f469-disco.dts +++ b/src/arm/stm32f469-disco.dts @@ -61,6 +61,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x1000000>; }; diff --git a/src/arm/stm32f746-disco.dts b/src/arm/stm32f746-disco.dts index e3a7bd338d61..0ba9c5b08ab9 100644 --- a/src/arm/stm32f746-disco.dts +++ b/src/arm/stm32f746-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x800000>; }; diff --git a/src/arm/stm32f746.dtsi b/src/arm/stm32f746.dtsi index f48d06a80d1d..a25b7000a3a1 100644 --- a/src/arm/stm32f746.dtsi +++ b/src/arm/stm32f746.dtsi @@ -40,12 +40,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include #include / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; diff --git a/src/arm/stm32f769-disco.dts b/src/arm/stm32f769-disco.dts index 483d896e2bc1..3c7216844a9b 100644 --- a/src/arm/stm32f769-disco.dts +++ b/src/arm/stm32f769-disco.dts @@ -56,6 +56,7 @@ }; memory { + device_type = "memory"; reg = <0xC0000000 0x1000000>; }; diff --git a/src/arm/stm32h743-pinctrl.dtsi b/src/arm/stm32h743-pinctrl.dtsi index 24be8e63dec8..980b2769caf9 100644 --- a/src/arm/stm32h743-pinctrl.dtsi +++ b/src/arm/stm32h743-pinctrl.dtsi @@ -173,6 +173,21 @@ }; }; + ethernet_rmii: rmii@0 { + pins { + pinmux = , + , + , + , + , + , + , + , + ; + slew-rate = <2>; + }; + }; + usart1_pins: usart1@0 { pins1 { pinmux = ; /* USART1_TX */ diff --git a/src/arm/stm32h743.dtsi b/src/arm/stm32h743.dtsi index cbdd69ca9e7a..5cac79ebebb1 100644 --- a/src/arm/stm32h743.dtsi +++ b/src/arm/stm32h743.dtsi @@ -40,13 +40,15 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include #include #include / { + #address-cells = <1>; + #size-cells = <1>; + clocks { clk_hse: clk-hse { #clock-cells = <0>; @@ -511,6 +513,19 @@ status = "disabled"; }; }; + + mac: ethernet@40028000 { + compatible = "st,stm32-dwmac", "snps,dwmac-4.10a"; + reg = <0x40028000 0x8000>; + reg-names = "stmmaceth"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; + clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>; + st,syscon = <&syscfg 0x4>; + snps,pbl = <8>; + status = "disabled"; + }; }; }; diff --git a/src/arm/stm32h743i-disco.dts b/src/arm/stm32h743i-disco.dts index 45e088c55741..dd06c8f3d09a 100644 --- a/src/arm/stm32h743i-disco.dts +++ b/src/arm/stm32h743i-disco.dts @@ -54,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -66,6 +67,23 @@ clock-frequency = <25000000>; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &usart2 { pinctrl-0 = <&usart2_pins>; pinctrl-names = "default"; diff --git a/src/arm/stm32h743i-eval.dts b/src/arm/stm32h743i-eval.dts index 3f8e0c4a998d..ebc3f0933f5c 100644 --- a/src/arm/stm32h743i-eval.dts +++ b/src/arm/stm32h743i-eval.dts @@ -54,6 +54,7 @@ }; memory { + device_type = "memory"; reg = <0xd0000000 0x2000000>; }; @@ -104,6 +105,23 @@ status = "okay"; }; +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins>; pinctrl-names = "default"; diff --git a/src/arm/stm32mp157-pinctrl.dtsi b/src/arm/stm32mp157-pinctrl.dtsi index c4851271e810..9ec4694e93a7 100644 --- a/src/arm/stm32mp157-pinctrl.dtsi +++ b/src/arm/stm32mp157-pinctrl.dtsi @@ -246,6 +246,13 @@ }; }; + m_can1_sleep_pins_a: m_can1-sleep@0 { + pins { + pinmux = , /* CAN1_TX */ + ; /* CAN1_RX */ + }; + }; + pwm2_pins_a: pwm2-0 { pins { pinmux = ; /* TIM2_CH4 */ diff --git a/src/arm/stm32mp157c-ed1.dts b/src/arm/stm32mp157c-ed1.dts index f77bea49c079..d66edb0c66cd 100644 --- a/src/arm/stm32mp157c-ed1.dts +++ b/src/arm/stm32mp157c-ed1.dts @@ -17,6 +17,7 @@ }; memory@c0000000 { + device_type = "memory"; reg = <0xC0000000 0x40000000>; }; @@ -49,6 +50,10 @@ }; }; +&dts { + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; @@ -72,6 +77,9 @@ &timers6 { status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; timer@5 { status = "okay"; }; diff --git a/src/arm/stm32mp157c-ev1.dts b/src/arm/stm32mp157c-ev1.dts index 063ee8ac5dcb..b6aca40b9b90 100644 --- a/src/arm/stm32mp157c-ev1.dts +++ b/src/arm/stm32mp157c-ev1.dts @@ -124,8 +124,9 @@ }; &m_can1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; status = "okay"; }; @@ -161,6 +162,9 @@ }; &timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm2_pins_a>; @@ -173,6 +177,8 @@ }; &timers8 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm8_pins_a>; @@ -185,6 +191,8 @@ }; &timers12 { + /delete-property/dmas; + /delete-property/dma-names; status = "disabled"; pwm { pinctrl-0 = <&pwm12_pins_a>; diff --git a/src/arm/stm32mp157c.dtsi b/src/arm/stm32mp157c.dtsi index 8bf1c17f8cef..f8bbfff5950b 100644 --- a/src/arm/stm32mp157c.dtsi +++ b/src/arm/stm32mp157c.dtsi @@ -84,6 +84,31 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&dts>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <85000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu-crit { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -98,6 +123,12 @@ reg = <0x40000000 0x400>; clocks = <&rcc TIM2_K>; clock-names = "int"; + dmas = <&dmamux1 18 0x400 0x1>, + <&dmamux1 19 0x400 0x1>, + <&dmamux1 20 0x400 0x1>, + <&dmamux1 21 0x400 0x1>, + <&dmamux1 22 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up"; status = "disabled"; pwm { @@ -119,6 +150,13 @@ reg = <0x40001000 0x400>; clocks = <&rcc TIM3_K>; clock-names = "int"; + dmas = <&dmamux1 23 0x400 0x1>, + <&dmamux1 24 0x400 0x1>, + <&dmamux1 25 0x400 0x1>, + <&dmamux1 26 0x400 0x1>, + <&dmamux1 27 0x400 0x1>, + <&dmamux1 28 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -140,6 +178,11 @@ reg = <0x40002000 0x400>; clocks = <&rcc TIM4_K>; clock-names = "int"; + dmas = <&dmamux1 29 0x400 0x1>, + <&dmamux1 30 0x400 0x1>, + <&dmamux1 31 0x400 0x1>, + <&dmamux1 32 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4"; status = "disabled"; pwm { @@ -161,6 +204,13 @@ reg = <0x40003000 0x400>; clocks = <&rcc TIM5_K>; clock-names = "int"; + dmas = <&dmamux1 55 0x400 0x1>, + <&dmamux1 56 0x400 0x1>, + <&dmamux1 57 0x400 0x1>, + <&dmamux1 58 0x400 0x1>, + <&dmamux1 59 0x400 0x1>, + <&dmamux1 60 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig"; status = "disabled"; pwm { @@ -182,6 +232,8 @@ reg = <0x40004000 0x400>; clocks = <&rcc TIM6_K>; clock-names = "int"; + dmas = <&dmamux1 69 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@5 { @@ -198,6 +250,8 @@ reg = <0x40005000 0x400>; clocks = <&rcc TIM7_K>; clock-names = "int"; + dmas = <&dmamux1 70 0x400 0x1>; + dma-names = "up"; status = "disabled"; timer@6 { @@ -465,6 +519,15 @@ reg = <0x44000000 0x400>; clocks = <&rcc TIM1_K>; clock-names = "int"; + dmas = <&dmamux1 11 0x400 0x1>, + <&dmamux1 12 0x400 0x1>, + <&dmamux1 13 0x400 0x1>, + <&dmamux1 14 0x400 0x1>, + <&dmamux1 15 0x400 0x1>, + <&dmamux1 16 0x400 0x1>, + <&dmamux1 17 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -486,6 +549,15 @@ reg = <0x44001000 0x400>; clocks = <&rcc TIM8_K>; clock-names = "int"; + dmas = <&dmamux1 47 0x400 0x1>, + <&dmamux1 48 0x400 0x1>, + <&dmamux1 49 0x400 0x1>, + <&dmamux1 50 0x400 0x1>, + <&dmamux1 51 0x400 0x1>, + <&dmamux1 52 0x400 0x1>, + <&dmamux1 53 0x400 0x1>; + dma-names = "ch1", "ch2", "ch3", "ch4", + "up", "trig", "com"; status = "disabled"; pwm { @@ -543,6 +615,11 @@ reg = <0x44006000 0x400>; clocks = <&rcc TIM15_K>; clock-names = "int"; + dmas = <&dmamux1 105 0x400 0x1>, + <&dmamux1 106 0x400 0x1>, + <&dmamux1 107 0x400 0x1>, + <&dmamux1 108 0x400 0x1>; + dma-names = "ch1", "up", "trig", "com"; status = "disabled"; pwm { @@ -564,6 +641,9 @@ reg = <0x44007000 0x400>; clocks = <&rcc TIM16_K>; clock-names = "int"; + dmas = <&dmamux1 109 0x400 0x1>, + <&dmamux1 110 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -584,6 +664,9 @@ reg = <0x44008000 0x400>; clocks = <&rcc TIM17_K>; clock-names = "int"; + dmas = <&dmamux1 111 0x400 0x1>, + <&dmamux1 112 0x400 0x1>; + dma-names = "ch1", "up"; status = "disabled"; pwm { @@ -684,14 +767,14 @@ m_can1: can@4400e000 { compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x2800>; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; reg-names = "m_can", "message_ram"; interrupts = , ; interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; status = "disabled"; }; @@ -908,6 +991,16 @@ status = "disabled"; }; + dts: thermal@50028000 { + compatible = "st,stm32-thermal"; + reg = <0x50028000 0x100>; + interrupts = ; + clocks = <&rcc TMPSENS>; + clock-names = "pclk"; + #thermal-sensor-cells = <0>; + status = "disabled"; + }; + cryp1: cryp@54001000 { compatible = "st,stm32mp1-cryp"; reg = <0x54001000 0x400>; diff --git a/src/arm/sun4i-a10.dtsi b/src/arm/sun4i-a10.dtsi index 5d46bb0139fa..73c3ac42095f 100644 --- a/src/arm/sun4i-a10.dtsi +++ b/src/arm/sun4i-a10.dtsi @@ -184,6 +184,26 @@ status = "disabled"; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -224,6 +244,19 @@ status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; dma: dma-controller@1c02000 { @@ -394,6 +427,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun4i-a10-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun4i-a10-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/src/arm/sun5i-a13-q8-tablet.dts b/src/arm/sun5i-a13-q8-tablet.dts index a89f29fa3e40..7257f39b31ce 100644 --- a/src/arm/sun5i-a13-q8-tablet.dts +++ b/src/arm/sun5i-a13-q8-tablet.dts @@ -49,14 +49,15 @@ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; panel: panel { - compatible = "urt,umsh-8596md-t", "simple-panel"; + compatible = "bananapi,s070wv20-ct16", "simple-panel"; + power-supply = <®_vcc3v3>; + enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ + backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - /* TODO: lcd panel uses axp gpio0 as enable pin */ - backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; diff --git a/src/arm/sun5i-reference-design-tablet.dtsi b/src/arm/sun5i-reference-design-tablet.dtsi index 6202aabedbfe..5b1f0e198eb6 100644 --- a/src/arm/sun5i-reference-design-tablet.dtsi +++ b/src/arm/sun5i-reference-design-tablet.dtsi @@ -54,7 +54,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ + enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ }; chosen { diff --git a/src/arm/sun7i-a20-bananapi.dts b/src/arm/sun7i-a20-bananapi.dts index 556b1b591c5d..81bc85d398c1 100644 --- a/src/arm/sun7i-a20-bananapi.dts +++ b/src/arm/sun7i-a20-bananapi.dts @@ -191,6 +191,11 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; gpio-line-names = /* PA */ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", diff --git a/src/arm/sun8i-a23-a33.dtsi b/src/arm/sun8i-a23-a33.dtsi index a9c123de5d2c..43fe215e83ea 100644 --- a/src/arm/sun8i-a23-a33.dtsi +++ b/src/arm/sun8i-a23-a33.dtsi @@ -68,6 +68,12 @@ }; }; + de: display-engine { + /* compatible gets set in SoC specific dtsi file */ + allwinner,pipelines = <&fe0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = , @@ -155,6 +161,55 @@ #dma-cells = <1>; }; + nfc: nand@1c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + tcon0: lcd-controller@1c0c000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c0c000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_LCD>, + <&ccu CLK_LCD_CH0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + resets = <&ccu RST_BUS_LCD>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -214,21 +269,6 @@ #size-cells = <0>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - resets = <&ccu RST_BUS_NAND>; - reset-names = "ahb"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - usb_otg: usb@1c19000 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c19000 0x0400>; @@ -572,6 +612,111 @@ interrupts = ; }; + fe0: display-frontend@1e00000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, + <&ccu CLK_DRAM_DE_FE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_FE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_BUS_DE_BE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01e70000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, + <&ccu CLK_DRAM_DRC>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_DRC>; + + assigned-clocks = <&ccu CLK_DRC>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@1f00000 { compatible = "allwinner,sun8i-a23-rtc"; reg = <0x01f00000 0x400>; diff --git a/src/arm/sun8i-a23-ippo-q8h-v1.2.dts b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts index b6958e8f2f01..d4dab7c28398 100644 --- a/src/arm/sun8i-a23-ippo-q8h-v1.2.dts +++ b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts index b6958e8f2f01..d4dab7c28398 100644 --- a/src/arm/sun8i-a23-ippo-q8h-v5.dts +++ b/src/arm/sun8i-a23-ippo-q8h-v5.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/src/arm/sun8i-a23-q8-tablet.dts b/src/arm/sun8i-a23-q8-tablet.dts index b6958e8f2f01..d4dab7c28398 100644 --- a/src/arm/sun8i-a23-q8-tablet.dts +++ b/src/arm/sun8i-a23-q8-tablet.dts @@ -61,3 +61,7 @@ "Headset Mic", "HBIAS"; status = "okay"; }; + +&panel { + compatible = "bananapi,s070wv20-ct16", "simple-panel"; +}; diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi index d00055e9eef5..a5e884a8b2ae 100644 --- a/src/arm/sun8i-a23.dtsi +++ b/src/arm/sun8i-a23.dtsi @@ -62,10 +62,26 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a23-display-backend"; +}; + &ccu { compatible = "allwinner,sun8i-a23-ccu"; }; +&de { + compatible = "allwinner,sun8i-a23-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a23-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a23-display-frontend"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = , @@ -73,6 +89,10 @@ ; }; +&tcon0 { + compatible = "allwinner,sun8i-a23-tcon"; +}; + &usb_otg { compatible = "allwinner,sun6i-a31-musb"; }; diff --git a/src/arm/sun8i-a33.dtsi b/src/arm/sun8i-a33.dtsi index 626152c30f50..1111a6498102 100644 --- a/src/arm/sun8i-a33.dtsi +++ b/src/arm/sun8i-a33.dtsi @@ -159,12 +159,6 @@ }; }; - de: display-engine { - compatible = "allwinner,sun8i-a33-display-engine"; - allwinner,pipelines = <&fe0>; - status = "disabled"; - }; - iio-hwmon { compatible = "iio-hwmon"; io-channels = <&ths>; @@ -209,47 +203,6 @@ }; soc { - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun8i-a33-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_LCD>, - <&ccu CLK_LCD_CH0>; - clock-names = "ahb", - "tcon-ch0"; - clock-output-names = "tcon-pixel-clock"; - resets = <&ccu RST_BUS_LCD>; - reset-names = "lcd"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_dsi: endpoint@1 { - reg = <1>; - remote-endpoint = <&dsi_in_tcon0>; - }; - }; - }; - }; - video-codec@1c0e000 { compatible = "allwinner,sun8i-a33-video-engine"; reg = <0x01c0e000 0x1000>; @@ -339,115 +292,6 @@ status = "disabled"; #phy-cells = <0>; }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun8i-a33-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>, - <&ccu CLK_DRAM_DE_FE>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_BUS_DE_FE>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun8i-a33-display-backend"; - reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; - reg-names = "be", "sat"; - interrupts = ; - clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, - <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; - clock-names = "ahb", "mod", - "ram", "sat"; - resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; - reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_drc0: endpoint@0 { - reg = <0>; - remote-endpoint = <&drc0_in_be0>; - }; - }; - }; - }; - - drc0: drc@1e70000 { - compatible = "allwinner,sun8i-a33-drc"; - reg = <0x01e70000 0x10000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>, - <&ccu CLK_DRAM_DRC>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_BUS_DRC>; - - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - drc0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_drc0>; - }; - }; - - drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - drc0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_drc0>; - }; - }; - }; - }; }; thermal-zones { @@ -524,10 +368,37 @@ }; }; +&be0 { + compatible = "allwinner,sun8i-a33-display-backend"; + /* A33 has an extra "SAT" module packed inside the display backend */ + reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>; + reg-names = "be", "sat"; + clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>; + clock-names = "ahb", "mod", + "ram", "sat"; + resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; + reset-names = "be", "sat"; + assigned-clocks = <&ccu CLK_DE_BE>; + assigned-clock-rates = <300000000>; +}; + &ccu { compatible = "allwinner,sun8i-a33-ccu"; }; +&de { + compatible = "allwinner,sun8i-a33-display-engine"; +}; + +&drc0 { + compatible = "allwinner,sun8i-a33-drc"; +}; + +&fe0 { + compatible = "allwinner,sun8i-a33-display-frontend"; +}; + &mali { operating-points-v2 = <&mali_opp_table>; }; @@ -544,6 +415,17 @@ }; +&tcon0 { + compatible = "allwinner,sun8i-a33-tcon"; +}; + +&tcon0_out { + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + }; +}; + &usb_otg { compatible = "allwinner,sun8i-a33-musb"; }; diff --git a/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts b/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts index 1c012a4def16..9c006fc18821 100644 --- a/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/src/arm/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -154,6 +154,10 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/src/arm/sun8i-a83t-bananapi-m3.dts b/src/arm/sun8i-a83t-bananapi-m3.dts index 7d30d3e530fb..838be7b3715f 100644 --- a/src/arm/sun8i-a83t-bananapi-m3.dts +++ b/src/arm/sun8i-a83t-bananapi-m3.dts @@ -237,6 +237,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/src/arm/sun8i-a83t-cubietruck-plus.dts b/src/arm/sun8i-a83t-cubietruck-plus.dts index a5a9f5a0603e..fcbec3d7ccd7 100644 --- a/src/arm/sun8i-a83t-cubietruck-plus.dts +++ b/src/arm/sun8i-a83t-cubietruck-plus.dts @@ -247,6 +247,14 @@ #include "axp81x.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/src/arm/sun8i-h3-nanopi-m1-plus.dts b/src/arm/sun8i-h3-nanopi-m1-plus.dts index 65cba1050802..4ec94d72f021 100644 --- a/src/arm/sun8i-h3-nanopi-m1-plus.dts +++ b/src/arm/sun8i-h3-nanopi-m1-plus.dts @@ -67,6 +67,21 @@ pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; }; &ehci1 { @@ -94,6 +109,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/src/arm/sun8i-q8-common.dtsi b/src/arm/sun8i-q8-common.dtsi index 719ad769b837..53104f4ccacc 100644 --- a/src/arm/sun8i-q8-common.dtsi +++ b/src/arm/sun8i-q8-common.dtsi @@ -49,6 +49,26 @@ ethernet0 = &sdio_wifi; }; + panel: panel { + /* Tablet dts should provide panel compatible */ + backlight = <&backlight>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_dc1sw>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; /* @@ -64,6 +84,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -90,6 +114,19 @@ }; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/src/arm/sun8i-r40-bananapi-m2-ultra.dts index 438b7b44dab3..c488aaacbd68 100644 --- a/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -102,6 +102,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; @@ -196,6 +198,11 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <2500000>; @@ -250,12 +257,27 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + ®_dldo4 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; @@ -278,6 +300,25 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; usb2_vbus-supply = <®_vcc5v0>; diff --git a/src/arm/sun8i-r40.dtsi b/src/arm/sun8i-r40.dtsi index 89762dbefe42..06b685869f52 100644 --- a/src/arm/sun8i-r40.dtsi +++ b/src/arm/sun8i-r40.dtsi @@ -342,6 +342,11 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + clk_out_a_pin: clk-out-a-pin { + pins = "PI12"; + function = "clk_out_a"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -389,6 +394,16 @@ pins = "PB22", "PB23"; function = "uart0"; }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { + pins = "PG8", "PG9"; + function = "uart3"; + }; }; wdt: watchdog@1c20c90 { diff --git a/src/arm/sun9i-a80-cubieboard4.dts b/src/arm/sun9i-a80-cubieboard4.dts index 85da85faf869..28c034928d67 100644 --- a/src/arm/sun9i-a80-cubieboard4.dts +++ b/src/arm/sun9i-a80-cubieboard4.dts @@ -133,6 +133,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; @@ -183,10 +196,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dc1sw>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -217,6 +246,10 @@ /* unused */ }; + reg_dc1sw: dc1sw { + regulator-name = "vcc-pd"; + }; + reg_dc5ldo: dc5ldo { regulator-always-on; regulator-min-microvolt = <800000>; @@ -271,7 +304,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -290,14 +322,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -385,6 +415,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/src/arm/sun9i-a80-optimus.dts b/src/arm/sun9i-a80-optimus.dts index 58a199b0e494..864715ec3cb0 100644 --- a/src/arm/sun9i-a80-optimus.dts +++ b/src/arm/sun9i-a80-optimus.dts @@ -120,6 +120,19 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_cldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -172,10 +185,26 @@ clocks = <&ac100_rtc 0>; }; +&pio { + vcc-pa-supply = <®_ldo_io1>; + vcc-pb-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo2>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_ldo_io0>; + vcc-ph-supply = <®_dcdc1>; +}; + &r_ir { status = "okay"; }; +&r_pio { + vcc-pl-supply = <®_dldo2>; + vcc-pm-supply = <®_eldo3>; +}; + &r_rsb { status = "okay"; @@ -213,6 +242,10 @@ regulator-name = "vdd-cpus-09-usbh"; }; + dc1sw { + /* unused */ + }; + reg_dcdc1: dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -260,7 +293,6 @@ }; reg_dldo2: dldo2 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pl"; @@ -279,14 +311,12 @@ }; reg_eldo3: eldo3 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pm-codec-io1"; }; reg_ldo_io0: ldo_io0 { - regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pg"; @@ -374,6 +404,14 @@ */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * The PHY requires 20ms after all voltages + * are applied until core logic is ready and + * 30ms after the reset pin is de-asserted. + * Set a 100ms delay to account for PMIC + * ramp time and board traces. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-gmac-phy"; }; diff --git a/src/arm/sun9i-a80.dtsi b/src/arm/sun9i-a80.dtsi index d9532fb1ef65..6fb292e0b662 100644 --- a/src/arm/sun9i-a80.dtsi +++ b/src/arm/sun9i-a80.dtsi @@ -56,6 +56,10 @@ #size-cells = <2>; interrupt-parent = <&gic>; + aliases { + ethernet0 = &gmac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,37 @@ clock-output-names = "osc32k"; }; + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: mii_phy_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: gmac_int_tx_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@800030 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x00800030 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; @@ -283,6 +318,23 @@ }; }; + gmac: ethernet@830000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x00830000 0x1054>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_GMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_BUS_GMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; @@ -948,6 +1000,19 @@ #size-cells = <0>; #gpio-cells = <3>; + gmac_rgmii_pins: gmac-rgmii-pins { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA7", "PA8", + "PA9", "PA10", "PA12", "PA13", + "PA15", "PA16", "PA17"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + i2c3_pins: i2c3-pins { pins = "PG10", "PG11"; function = "i2c3"; diff --git a/src/arm/sunxi-bananapi-m2-plus.dtsi b/src/arm/sunxi-bananapi-m2-plus.dtsi index b3283aeb5b7d..3bed375b9c03 100644 --- a/src/arm/sunxi-bananapi-m2-plus.dtsi +++ b/src/arm/sunxi-bananapi-m2-plus.dtsi @@ -103,6 +103,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -215,7 +217,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; }; &usb_otg { diff --git a/src/arm/sunxi-h3-h5.dtsi b/src/arm/sunxi-h3-h5.dtsi index a4c757c0b741..d74a6cbbfdf4 100644 --- a/src/arm/sunxi-h3-h5.dtsi +++ b/src/arm/sunxi-h3-h5.dtsi @@ -740,8 +740,7 @@ }; csi: camera@1cb0000 { - compatible = "allwinner,sun8i-h3-csi", - "allwinner,sun6i-a31-csi"; + compatible = "allwinner,sun8i-h3-csi"; reg = <0x01cb0000 0x1000>; interrupts = ; clocks = <&ccu CLK_BUS_CSI>, diff --git a/src/arm/tegra114-dalmore.dts b/src/arm/tegra114-dalmore.dts index 1788556b4977..97a5c3504bbe 100644 --- a/src/arm/tegra114-dalmore.dts +++ b/src/arm/tegra114-dalmore.dts @@ -1087,7 +1087,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts index 9151b3ebb839..33bbb1c5285d 100644 --- a/src/arm/tegra124-jetson-tk1.dts +++ b/src/arm/tegra124-jetson-tk1.dts @@ -1656,7 +1656,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/src/arm/tegra124-nyan.dtsi b/src/arm/tegra124-nyan.dtsi index bc85b6a166c7..a1acd872bcf2 100644 --- a/src/arm/tegra124-nyan.dtsi +++ b/src/arm/tegra124-nyan.dtsi @@ -370,7 +370,7 @@ spi-max-frequency = <25000000>; flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <0>; }; diff --git a/src/arm/tegra124-venice2.dts b/src/arm/tegra124-venice2.dts index 82d139648ef1..4882b61fb680 100644 --- a/src/arm/tegra124-venice2.dts +++ b/src/arm/tegra124-venice2.dts @@ -879,7 +879,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { - compatible = "winbond,w25q32dw"; + compatible = "winbond,w25q32dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/src/arm/tegra20-trimslice.dts b/src/arm/tegra20-trimslice.dts index 9eb26dc15f6b..3e5ac096d85e 100644 --- a/src/arm/tegra20-trimslice.dts +++ b/src/arm/tegra20-trimslice.dts @@ -287,7 +287,7 @@ status = "okay"; spi-max-frequency = <48000000>; spi-flash@0 { - compatible = "winbond,w25q80bl"; + compatible = "winbond,w25q80bl", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <48000000>; }; diff --git a/src/arm/tegra20.dtsi b/src/arm/tegra20.dtsi index dcad6d6128cf..8c942e60703e 100644 --- a/src/arm/tegra20.dtsi +++ b/src/arm/tegra20.dtsi @@ -616,17 +616,14 @@ }; mc: memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; + compatible = "nvidia,tegra20-mc-gart"; + reg = <0x7000f000 0x400 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + clocks = <&tegra_car TEGRA20_CLK_MC>; + clock-names = "mc"; interrupts = ; #reset-cells = <1>; - }; - - iommu@7000f024 { - compatible = "nvidia,tegra20-gart"; - reg = <0x7000f024 0x00000018 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ + #iommu-cells = <0>; }; memory-controller@7000f400 { diff --git a/src/arm/tegra30-beaver.dts b/src/arm/tegra30-beaver.dts index b0d40ac8ac6e..a3b0f3555cd2 100644 --- a/src/arm/tegra30-beaver.dts +++ b/src/arm/tegra30-beaver.dts @@ -1886,7 +1886,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/src/arm/tegra30-cardhu.dtsi b/src/arm/tegra30-cardhu.dtsi index fb9222b479d2..7ce61edd52f5 100644 --- a/src/arm/tegra30-cardhu.dtsi +++ b/src/arm/tegra30-cardhu.dtsi @@ -360,7 +360,7 @@ status = "okay"; spi-max-frequency = <25000000>; spi-flash@1 { - compatible = "winbond,w25q32"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <20000000>; }; diff --git a/src/arm/versatile-ab.dts b/src/arm/versatile-ab.dts index 6f4f60ba5429..269e6bf99ccb 100644 --- a/src/arm/versatile-ab.dts +++ b/src/arm/versatile-ab.dts @@ -1,6 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; -/include/ "skeleton.dtsi" / { model = "ARM Versatile AB"; @@ -21,6 +20,7 @@ }; memory { + device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/src/arm/vexpress-v2m-rs1.dtsi b/src/arm/vexpress-v2m-rs1.dtsi index a9569d15de41..d3963e9eaf48 100644 --- a/src/arm/vexpress-v2m-rs1.dtsi +++ b/src/arm/vexpress-v2m-rs1.dtsi @@ -133,7 +133,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/src/arm/vexpress-v2m.dtsi b/src/arm/vexpress-v2m.dtsi index fd42e1194179..798c97aff7fa 100644 --- a/src/arm/vexpress-v2m.dtsi +++ b/src/arm/vexpress-v2m.dtsi @@ -133,7 +133,7 @@ mmci@5000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/src/arm/vexpress-v2p-ca15_a7.dts b/src/arm/vexpress-v2p-ca15_a7.dts index a2ccacd07f4f..00cd9f5bef2e 100644 --- a/src/arm/vexpress-v2p-ca15_a7.dts +++ b/src/arm/vexpress-v2p-ca15_a7.dts @@ -42,6 +42,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu1: cpu@1 { @@ -51,6 +52,7 @@ cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <990>; }; cpu2: cpu@2 { @@ -60,6 +62,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu3: cpu@3 { @@ -69,6 +72,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; cpu4: cpu@4 { @@ -78,6 +82,7 @@ cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; capacity-dmips-mhz = <516>; + dynamic-power-coefficient = <133>; }; idle-states { diff --git a/src/arm/vf610-bk4.dts b/src/arm/vf610-bk4.dts index b08d561d6748..3fa0cbe456db 100644 --- a/src/arm/vf610-bk4.dts +++ b/src/arm/vf610-bk4.dts @@ -60,6 +60,29 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + spi-gpio { + compatible = "spi-gpio"; + pinctrl-0 = <&pinctrl_gpio_spi>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + /* PTD12 ->RPIO[91] */ + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + /* PTD10 ->RPIO[89] */ + miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + gpio@0 { + compatible = "pisosr-gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + /* PTB18 -> RGPIO[40] */ + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + spi-max-frequency = <100000>; + }; + }; }; &adc0 { @@ -431,6 +454,14 @@ >; }; + pinctrl_gpio_spi: pinctrl-gpio-spi { + fsl,pins = < + VF610_PAD_PTB18__GPIO_40 0x1183 + VF610_PAD_PTD10__GPIO_89 0x1183 + VF610_PAD_PTD12__GPIO_91 0x1183 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < VF610_PAD_PTA22__I2C2_SCL 0x34df diff --git a/src/arm/vf610-zii-cfu1.dts b/src/arm/vf610-zii-cfu1.dts index 7cdcc5fe8282..445c7dc306b2 100644 --- a/src/arm/vf610-zii-cfu1.dts +++ b/src/arm/vf610-zii-cfu1.dts @@ -207,7 +207,7 @@ }; &i2c0 { - clock-frequency = <100000>; + clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; status = "okay"; diff --git a/src/arm/vf610-zii-ssmb-dtu.dts b/src/arm/vf610-zii-ssmb-dtu.dts new file mode 100644 index 000000000000..2b10672fadbd --- /dev/null +++ b/src/arm/vf610-zii-ssmb-dtu.dts @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB DTU board + * + * SSMB - SPU3 Switch Management Board + * DTU - Digital Tapping Unit + * + * Copyright (C) 2015-2019 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB DTU Board"; + compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_100_3"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_5"; + }; + + port@8 { + reg = <8>; + label = "eth_cu_1000_1"; + }; + + port@9 { + reg = <9>; + label = "eth_cu_1000_2"; + phy-handle = <&phy9>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + + mdio1 { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy9: phy9@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + pinctrl-0 = <&pinctrl_gpio_phy9>; + pinctrl-names = "default"; + interrupt-parent = <&gpio2>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* On SSMB */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* On DSB */ + temperature-sensor@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_phy9: pinctrl-gpio-phy9 { + fsl,pins = < + VF610_PAD_PTB24__GPIO_94 0x219d + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/src/arm/vf610-zii-ssmb-spu3.dts b/src/arm/vf610-zii-ssmb-spu3.dts index 757af56e8ee7..0d9fe5ac83a3 100644 --- a/src/arm/vf610-zii-ssmb-spu3.dts +++ b/src/arm/vf610-zii-ssmb-spu3.dts @@ -99,6 +99,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -106,6 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; diff --git a/src/arm/vt8500.dtsi b/src/arm/vt8500.dtsi index 1929ad390d88..8b5af039b072 100644 --- a/src/arm/vt8500.dtsi +++ b/src/arm/vt8500.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "via,vt8500"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/src/arm/wm8505.dtsi b/src/arm/wm8505.dtsi index e9ef539e13d3..cca6747304c4 100644 --- a/src/arm/wm8505.dtsi +++ b/src/arm/wm8505.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8505"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/src/arm/wm8650.dtsi b/src/arm/wm8650.dtsi index e12213d16693..00d01769a68f 100644 --- a/src/arm/wm8650.dtsi +++ b/src/arm/wm8650.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8650"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/src/arm/wm8750.dtsi b/src/arm/wm8750.dtsi index 46d076d7302b..54d8f7d9bb33 100644 --- a/src/arm/wm8750.dtsi +++ b/src/arm/wm8750.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8750"; cpus { @@ -21,6 +21,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/src/arm/wm8850.dtsi b/src/arm/wm8850.dtsi index 8fbccfbe75f3..c572d777077f 100644 --- a/src/arm/wm8850.dtsi +++ b/src/arm/wm8850.dtsi @@ -6,9 +6,9 @@ * Licensed under GPLv2 or later */ -/include/ "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; compatible = "wm,wm8850"; cpus { @@ -22,6 +22,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + aliases { serial0 = &uart0; serial1 = &uart1; diff --git a/src/arm/zx296702-ad1.dts b/src/arm/zx296702-ad1.dts index eedd3fcbc002..bd9400840023 100644 --- a/src/arm/zx296702-ad1.dts +++ b/src/arm/zx296702-ad1.dts @@ -14,6 +14,7 @@ }; memory { + device_type = "memory"; reg = <0x50000000 0x20000000>; }; }; diff --git a/src/arm/zx296702.dtsi b/src/arm/zx296702.dtsi index 240e7a23d81f..afd98de029be 100644 --- a/src/arm/zx296702.dtsi +++ b/src/arm/zx296702.dtsi @@ -1,10 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "skeleton.dtsi" #include #include / { + #address-cells = <1>; + #size-cells = <1>; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/src/arm/zynq-zturn.dts b/src/arm/zynq-zturn.dts index b38704657960..5ec616ebca08 100644 --- a/src/arm/zynq-zturn.dts +++ b/src/arm/zynq-zturn.dts @@ -54,7 +54,7 @@ label = "K1"; gpios = <&gpio0 0x32 0x1>; linux,code = <0x66>; - gpio-key,wakeup; + wakeup-source; autorepeat; }; }; diff --git a/src/arm64/actions/s700-cubieboard7.dts b/src/arm64/actions/s700-cubieboard7.dts index 28f3f4a0f7f0..63e375cd9eb4 100644 --- a/src/arm64/actions/s700-cubieboard7.dts +++ b/src/arm64/actions/s700-cubieboard7.dts @@ -30,6 +30,59 @@ }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_default>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_default>; +}; + +&i2c2 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_default>; +}; + +&pinctrl { + i2c0_default: i2c0_default { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_default: i2c1_default { + pinmux { + groups = "i2c1_dummy"; + function = "i2c1"; + }; + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_default: i2c2_default { + pinmux { + groups = "i2c2_dummy"; + function = "i2c2"; + }; + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; +}; + &timer { clocks = <&hosc>; }; diff --git a/src/arm64/actions/s700.dtsi b/src/arm64/actions/s700.dtsi index 192c7b39c8c1..2006ad5424fa 100644 --- a/src/arm64/actions/s700.dtsi +++ b/src/arm64/actions/s700.dtsi @@ -5,6 +5,7 @@ #include #include +#include / { compatible = "actions,s700"; @@ -18,28 +19,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; @@ -172,6 +173,47 @@ reg = <0x0 0xe0168000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0174000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0178000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e017c000 { + compatible = "actions,s700-i2c"; + reg = <0 0xe017c000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; sps: power-controller@e01b0100 { @@ -186,5 +228,21 @@ interrupts = ; interrupt-names = "timer1"; }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + ; + }; }; }; diff --git a/src/arm64/actions/s900.dtsi b/src/arm64/actions/s900.dtsi index 491ddccc9038..df3a68a3ac97 100644 --- a/src/arm64/actions/s900.dtsi +++ b/src/arm64/actions/s900.dtsi @@ -5,6 +5,7 @@ #include #include +#include / { compatible = "actions,s900"; @@ -18,28 +19,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; @@ -184,6 +185,7 @@ reg = <0x0 0xe0160000 0x0 0x1000>; clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; }; i2c0: i2c@e0170000 { @@ -253,6 +255,14 @@ gpio-controller; gpio-ranges = <&pinctrl 0 0 146>; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + ; }; timer: timer@e0228000 { diff --git a/src/arm64/al/alpine-v2.dtsi b/src/arm64/al/alpine-v2.dtsi index 5b7bef684256..d5e7e2bb4e6c 100644 --- a/src/arm64/al/alpine-v2.dtsi +++ b/src/arm64/al/alpine-v2.dtsi @@ -47,28 +47,28 @@ #size-cells = <0>; cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; diff --git a/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 9d0afd7d50ec..7793ebb5d2b8 100644 --- a/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -222,6 +222,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { /* * This regulator also drives the PE pingroup GPIOs, diff --git a/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index 31884dbc8838..f4e78531f639 100644 --- a/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -186,6 +186,10 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/src/arm64/allwinner/sun50i-a64-olinuxino.dts index f7a4bccaa5d4..01a9a52edae4 100644 --- a/src/arm64/allwinner/sun50i-a64-olinuxino.dts +++ b/src/arm64/allwinner/sun50i-a64-olinuxino.dts @@ -177,6 +177,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; diff --git a/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 8974b5a1d3b1..510f661229dc 100644 --- a/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -194,6 +194,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; diff --git a/src/arm64/allwinner/sun50i-a64-pine64.dts b/src/arm64/allwinner/sun50i-a64-pine64.dts index 216f2f5db5ef..c0b9cc7a6b3a 100644 --- a/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -169,6 +169,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; diff --git a/src/arm64/allwinner/sun50i-a64-teres-i.dts b/src/arm64/allwinner/sun50i-a64-teres-i.dts index c455b24dd079..7b7b14ba58e6 100644 --- a/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -145,6 +145,14 @@ #include "axp803.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-always-on; regulator-min-microvolt = <2800000>; @@ -239,7 +247,7 @@ }; /* - * The A64 chip cannot work without this regulator off, although + * The A64 chip cannot work with this regulator off, although * it seems to be only driving the AR100 core. * Maybe we don't still know well about CPUs domain. */ diff --git a/src/arm64/allwinner/sun50i-a64.dtsi b/src/arm64/allwinner/sun50i-a64.dtsi index 2abb335145a6..e628d063931b 100644 --- a/src/arm64/allwinner/sun50i-a64.dtsi +++ b/src/arm64/allwinner/sun50i-a64.dtsi @@ -84,7 +84,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; @@ -92,7 +92,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; @@ -100,7 +100,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; @@ -108,7 +108,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; @@ -142,6 +142,15 @@ clock-output-names = "ext-osc32k"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -191,6 +200,7 @@ timer { compatible = "arm,armv8-timer"; + allwinner,erratum-unknown1; interrupts = , ; + csi_pins: csi-pins { + pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", + "PE7", "PE8", "PE9", "PE10", "PE11"; + function = "csi"; + }; + i2c0_pins: i2c0_pins { pins = "PH0", "PH1"; function = "i2c0"; @@ -916,6 +932,20 @@ status = "disabled"; }; + csi: csi@1cb0000 { + compatible = "allwinner,sun50i-a64-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_pins>; + status = "disabled"; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; diff --git a/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts index 95e113ce8699..d68bdfea2271 100644 --- a/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -12,3 +12,7 @@ model = "Libre Computer Board ALL-H3-CC H5"; compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; }; + +&mmc2 { + mmc-ddr-3_3v; +}; diff --git a/src/arm64/allwinner/sun50i-h5.dtsi b/src/arm64/allwinner/sun50i-h5.dtsi index c22621b4b8e9..96acafd3a852 100644 --- a/src/arm64/allwinner/sun50i-h5.dtsi +++ b/src/arm64/allwinner/sun50i-h5.dtsi @@ -48,28 +48,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; diff --git a/src/arm64/allwinner/sun50i-h6.dtsi b/src/arm64/allwinner/sun50i-h6.dtsi index d93a7add67e7..c9e861a50a63 100644 --- a/src/arm64/allwinner/sun50i-h6.dtsi +++ b/src/arm64/allwinner/sun50i-h6.dtsi @@ -22,28 +22,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; @@ -167,6 +167,20 @@ reg = <0x0000 0x1e000>; }; }; + + sram_c1: sram@1a00000 { + compatible = "mmio-sram"; + reg = <0x01a00000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01a00000 0x200000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x200000>; + }; + }; }; ccu: clock@3001000 { @@ -178,17 +192,6 @@ #reset-cells = <1>; }; - gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - }; - pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -239,6 +242,17 @@ }; }; + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc"; diff --git a/src/arm64/altera/socfpga_stratix10.dtsi b/src/arm64/altera/socfpga_stratix10.dtsi index b2c9bb664595..cd7c76e58b09 100644 --- a/src/arm64/altera/socfpga_stratix10.dtsi +++ b/src/arm64/altera/socfpga_stratix10.dtsi @@ -42,28 +42,28 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x0>; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x1>; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x2>; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x3>; @@ -161,6 +161,8 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 1>; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; status = "disabled"; }; @@ -177,6 +179,8 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 2>; + altr,sysmgr-syscon = <&sysmgr 0x48 0>; status = "disabled"; }; @@ -193,6 +197,8 @@ tx-fifo-depth = <16384>; rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; + iommus = <&smmu 3>; + altr,sysmgr-syscon = <&sysmgr 0x4c 0>; status = "disabled"; }; @@ -303,6 +309,7 @@ clocks = <&clkmgr STRATIX10_L4_MP_CLK>, <&clkmgr STRATIX10_SDMMC_CLK>; clock-names = "biu", "ciu"; + iommus = <&smmu 5>; status = "disabled"; }; @@ -336,6 +343,29 @@ reg = <0xffd11000 0x1000>; }; + smmu: iommu@fa000000 { + compatible = "arm,mmu-500", "arm,smmu-v2"; + reg = <0xfa000000 0x40000>; + #global-interrupts = <2>; + #iommu-cells = <1>; + clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; + clock-names = "iommu"; + interrupt-parent = <&intc>; + interrupts = <0 128 4>, /* Global Secure Fault */ + <0 129 4>, /* Global Non-secure Fault */ + /* Non-secure Context Interrupts (32) */ + <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, + <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, + <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; + stream-match-mask = <0x7ff0>; + status = "disabled"; + }; + spi0: spi@ffda4000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -445,6 +475,7 @@ resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + iommus = <&smmu 6>; status = "disabled"; }; @@ -457,6 +488,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + iommus = <&smmu 7>; status = "disabled"; }; diff --git a/src/arm64/amlogic/meson-axg-s400.dts b/src/arm64/amlogic/meson-axg-s400.dts index 824eba98db2c..75fe1a2c49d0 100644 --- a/src/arm64/amlogic/meson-axg-s400.dts +++ b/src/arm64/amlogic/meson-axg-s400.dts @@ -95,6 +95,13 @@ sound-name-prefix = "MIC"; }; + spdif_dir: audio-codec-4 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + status = "okay"; + sound-name-prefix = "DIR"; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -249,6 +256,9 @@ "TODDR_A IN 2", "TDMIN_C OUT", "TODDR_B IN 2", "TDMIN_C OUT", "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 3", "SPDIFIN Capture", + "TODDR_B IN 3", "SPDIFIN Capture", + "TODDR_C IN 3", "SPDIFIN Capture", "TODDR_A IN 4", "PDM Capture", "TODDR_B IN 4", "PDM Capture", "TODDR_C IN 4", "PDM Capture", @@ -326,6 +336,14 @@ }; dai-link-8 { + sound-dai = <&spdifin>; + + codec { + sound-dai = <&spdif_dir>; + }; + }; + + dai-link-9 { sound-dai = <&pdm>; codec { @@ -446,7 +464,8 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr104; + max-frequency = <200000000>; non-removable; disable-wp; @@ -469,9 +488,8 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; - max-frequency = <180000000>; + max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; @@ -483,6 +501,12 @@ vqmmc-supply = <&vddio_boot>; }; +&spdifin { + pinctrl-0 = <&spdif_in_a19_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &spdifout { pinctrl-0 = <&spdif_out_a20_pins>; pinctrl-names = "default"; diff --git a/src/arm64/amlogic/meson-axg.dtsi b/src/arm64/amlogic/meson-axg.dtsi index fffd55787981..34704fecf756 100644 --- a/src/arm64/amlogic/meson-axg.dtsi +++ b/src/arm64/amlogic/meson-axg.dtsi @@ -68,7 +68,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -77,7 +77,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -86,7 +86,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -95,7 +95,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -111,6 +111,14 @@ compatible = "amlogic,meson-gxbb-sm"; }; + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1260,6 +1268,18 @@ status = "disabled"; }; + spdifin: audio-controller@400 { + compatible = "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + spdifout: audio-controller@480 { compatible = "amlogic,axg-spdifout"; reg = <0x0 0x480 0x0 0x50>; @@ -1590,6 +1610,11 @@ status = "disabled"; }; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-axg-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; reg = <0x0 0x1c000 0x0 0x20>; diff --git a/src/arm64/amlogic/meson-g12a-x96-max.dts b/src/arm64/amlogic/meson-g12a-x96-max.dts new file mode 100644 index 000000000000..c62d3d5706ff --- /dev/null +++ b/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +}; diff --git a/src/arm64/amlogic/meson-g12a.dtsi b/src/arm64/amlogic/meson-g12a.dtsi index 3b82a975c663..17c6217f8a84 100644 --- a/src/arm64/amlogic/meson-g12a.dtsi +++ b/src/arm64/amlogic/meson-g12a.dtsi @@ -20,7 +20,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -28,7 +28,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -36,7 +36,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -44,7 +44,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -78,20 +78,41 @@ #size-cells = <2>; ranges; - periphs: periphs@ff634000 { + apb: bus@ff600000 { compatible = "simple-bus"; - reg = <0x0 0xff634000 0x0 0x2000>; + reg = <0x0 0xff600000 0x0 0x200000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - }; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + }; + }; }; aobus: bus@ff800000 { @@ -102,7 +123,8 @@ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -111,7 +133,8 @@ }; uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = ; clocks = <&xtal>, <&xtal>, <&xtal>; @@ -135,18 +158,15 @@ cbus: bus@ffd00000 { compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; + reg = <0x0 0xffd00000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - }; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - apb: apb@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; }; }; diff --git a/src/arm64/amlogic/meson-gx.dtsi b/src/arm64/amlogic/meson-gx.dtsi index 44c5c51ff1fa..6772709b9e19 100644 --- a/src/arm64/amlogic/meson-gx.dtsi +++ b/src/arm64/amlogic/meson-gx.dtsi @@ -50,13 +50,35 @@ }; }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + power-domains = <&pwrc_vpu>; + status = "disabled"; + }; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; @@ -65,7 +87,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; @@ -74,7 +96,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; @@ -83,7 +105,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; @@ -510,6 +532,7 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + amlogic,canvas = <&canvas>; /* CVBS VDAC output port */ cvbs_vdac_port: port@0 { diff --git a/src/arm64/amlogic/meson-gxbb.dtsi b/src/arm64/amlogic/meson-gxbb.dtsi index a7b883ced0a8..a60d3652beee 100644 --- a/src/arm64/amlogic/meson-gxbb.dtsi +++ b/src/arm64/amlogic/meson-gxbb.dtsi @@ -784,6 +784,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; diff --git a/src/arm64/amlogic/meson-gxl.dtsi b/src/arm64/amlogic/meson-gxl.dtsi index d5c3d78aafeb..3093ae421b17 100644 --- a/src/arm64/amlogic/meson-gxl.dtsi +++ b/src/arm64/amlogic/meson-gxl.dtsi @@ -787,6 +787,12 @@ resets = <&reset RESET_SD_EMMC_C>; }; +&simplefb_hdmi { + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; +}; + &spicc { clocks = <&clkc CLKID_SPICC>; clock-names = "core"; diff --git a/src/arm64/amlogic/meson-gxm.dtsi b/src/arm64/amlogic/meson-gxm.dtsi index 247888d68a3a..ed3a3d5adf31 100644 --- a/src/arm64/amlogic/meson-gxm.dtsi +++ b/src/arm64/amlogic/meson-gxm.dtsi @@ -44,7 +44,7 @@ cpu4: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; @@ -53,7 +53,7 @@ cpu5: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; @@ -62,7 +62,7 @@ cpu6: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; @@ -71,7 +71,7 @@ cpu7: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; diff --git a/src/arm64/apm/apm-shadowcat.dtsi b/src/arm64/apm/apm-shadowcat.dtsi index d8ecd1661461..7faea28a37b0 100644 --- a/src/arm64/apm/apm-shadowcat.dtsi +++ b/src/arm64/apm/apm-shadowcat.dtsi @@ -21,7 +21,7 @@ cpu@0 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -31,7 +31,7 @@ }; cpu@1 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -41,7 +41,7 @@ }; cpu@100 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -51,7 +51,7 @@ }; cpu@101 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -61,7 +61,7 @@ }; cpu@200 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -71,7 +71,7 @@ }; cpu@201 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -81,7 +81,7 @@ }; cpu@300 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -91,7 +91,7 @@ }; cpu@301 { device_type = "cpu"; - compatible = "apm,strega", "arm,armv8"; + compatible = "apm,strega"; reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; diff --git a/src/arm64/apm/apm-storm.dtsi b/src/arm64/apm/apm-storm.dtsi index 00e82b8e9a19..94d637d17262 100644 --- a/src/arm64/apm/apm-storm.dtsi +++ b/src/arm64/apm/apm-storm.dtsi @@ -21,7 +21,7 @@ cpu@0 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x000>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -29,7 +29,7 @@ }; cpu@1 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x001>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -37,7 +37,7 @@ }; cpu@100 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x100>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -45,7 +45,7 @@ }; cpu@101 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x101>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -53,7 +53,7 @@ }; cpu@200 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x200>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -61,7 +61,7 @@ }; cpu@201 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x201>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -69,7 +69,7 @@ }; cpu@300 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x300>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; @@ -77,7 +77,7 @@ }; cpu@301 { device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; + compatible = "apm,potenza"; reg = <0x0 0x301>; enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; diff --git a/src/arm64/arm/foundation-v8-gicv2.dtsi b/src/arm64/arm/foundation-v8-gicv2.dtsi index 851abf34fc80..15fe81738e94 100644 --- a/src/arm64/arm/foundation-v8-gicv2.dtsi +++ b/src/arm64/arm/foundation-v8-gicv2.dtsi @@ -14,6 +14,6 @@ <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = ; }; }; diff --git a/src/arm64/arm/foundation-v8-gicv3.dtsi b/src/arm64/arm/foundation-v8-gicv3.dtsi index 91fc5c60d88b..f2c75c756039 100644 --- a/src/arm64/arm/foundation-v8-gicv3.dtsi +++ b/src/arm64/arm/foundation-v8-gicv3.dtsi @@ -17,7 +17,7 @@ <0x0 0x2c000000 0x0 0x2000>, <0x0 0x2c010000 0x0 0x2000>, <0x0 0x2c02f000 0x0 0x2000>; - interrupts = <1 9 4>; + interrupts = ; its: its@2f020000 { compatible = "arm,gic-v3-its"; diff --git a/src/arm64/arm/foundation-v8.dtsi b/src/arm64/arm/foundation-v8.dtsi index e080277d27ae..3f78373f708a 100644 --- a/src/arm64/arm/foundation-v8.dtsi +++ b/src/arm64/arm/foundation-v8.dtsi @@ -7,6 +7,8 @@ /dts-v1/; +#include + /memreserve/ 0x80000000 0x00010000; / { @@ -67,26 +69,26 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = , + , + , + ; clock-frequency = <100000000>; }; pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; + interrupts = , + , + , + ; }; watchdog@2a440000 { compatible = "arm,sbsa-gwdt"; reg = <0x0 0x2a440000 0 0x1000>, <0x0 0x2a450000 0 0x1000>; - interrupts = <0 27 4>; + interrupts = ; timeout-sec = <30>; }; @@ -105,49 +107,49 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 0 0 4>, - <0 0 1 &gic 0 0 0 1 4>, - <0 0 2 &gic 0 0 0 2 4>, - <0 0 3 &gic 0 0 0 3 4>, - <0 0 4 &gic 0 0 0 4 4>, - <0 0 5 &gic 0 0 0 5 4>, - <0 0 6 &gic 0 0 0 6 4>, - <0 0 7 &gic 0 0 0 7 4>, - <0 0 8 &gic 0 0 0 8 4>, - <0 0 9 &gic 0 0 0 9 4>, - <0 0 10 &gic 0 0 0 10 4>, - <0 0 11 &gic 0 0 0 11 4>, - <0 0 12 &gic 0 0 0 12 4>, - <0 0 13 &gic 0 0 0 13 4>, - <0 0 14 &gic 0 0 0 14 4>, - <0 0 15 &gic 0 0 0 15 4>, - <0 0 16 &gic 0 0 0 16 4>, - <0 0 17 &gic 0 0 0 17 4>, - <0 0 18 &gic 0 0 0 18 4>, - <0 0 19 &gic 0 0 0 19 4>, - <0 0 20 &gic 0 0 0 20 4>, - <0 0 21 &gic 0 0 0 21 4>, - <0 0 22 &gic 0 0 0 22 4>, - <0 0 23 &gic 0 0 0 23 4>, - <0 0 24 &gic 0 0 0 24 4>, - <0 0 25 &gic 0 0 0 25 4>, - <0 0 26 &gic 0 0 0 26 4>, - <0 0 27 &gic 0 0 0 27 4>, - <0 0 28 &gic 0 0 0 28 4>, - <0 0 29 &gic 0 0 0 29 4>, - <0 0 30 &gic 0 0 0 30 4>, - <0 0 31 &gic 0 0 0 31 4>, - <0 0 32 &gic 0 0 0 32 4>, - <0 0 33 &gic 0 0 0 33 4>, - <0 0 34 &gic 0 0 0 34 4>, - <0 0 35 &gic 0 0 0 35 4>, - <0 0 36 &gic 0 0 0 36 4>, - <0 0 37 &gic 0 0 0 37 4>, - <0 0 38 &gic 0 0 0 38 4>, - <0 0 39 &gic 0 0 0 39 4>, - <0 0 40 &gic 0 0 0 40 4>, - <0 0 41 &gic 0 0 0 41 4>, - <0 0 42 &gic 0 0 0 42 4>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ethernet@2,02000000 { compatible = "smsc,lan91c111"; diff --git a/src/arm64/arm/fvp-base-revc.dts b/src/arm64/arm/fvp-base-revc.dts new file mode 100644 index 000000000000..687707020ec1 --- /dev/null +++ b/src/arm64/arm/fvp-base-revc.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Ltd. Fast Models + * + * Architecture Envelope Model (AEM) ARMv8-A + * ARMAEMv8AMPCT + * + * FVP Base RevC + */ + +/dts-v1/; + +#include + +/memreserve/ 0x80000000 0x00010000; + +#include "rtsm_ve-motherboard.dtsi" +#include "rtsm_ve-motherboard-rs2.dtsi" + +/ { + model = "FVP Base RevC"; + compatible = "arm,fvp-base-revc", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "psci"; + }; + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + }; + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10000>; + enable-method = "psci"; + }; + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10100>; + enable-method = "psci"; + }; + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10200>; + enable-method = "psci"; + }; + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x10300>; + enable-method = "psci"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Chipselect 2,00000000 is physically at 0x18000000 */ + vram: vram@18000000 { + /* 8 MB of designated video RAM */ + compatible = "shared-dma-pool"; + reg = <0x00000000 0x18000000 0 0x00800000>; + no-map; + }; + }; + + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0 0x10000>, // GICD + <0x0 0x2f100000 0 0x200000>, // GICR + <0x0 0x2c000000 0 0x2000>, // GICC + <0x0 0x2c010000 0 0x2000>, // GICH + <0x0 0x2c02f000 0 0x2000>; // GICV + interrupts = ; + + its: its@2f020000 { + #msi-cells = <1>; + compatible = "arm,gic-v3-its"; + reg = <0x0 0x2f020000 0x0 0x20000>; // GITS + msi-controller; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = ; + }; + + pci: pci@40000000 { + #address-cells = <0x3>; + #size-cells = <0x2>; + #interrupt-cells = <0x1>; + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + bus-range = <0x0 0x1>; + reg = <0x0 0x40000000 0x0 0x10000000>; + ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + msi-map = <0x0 &its 0x0 0x10000>; + iommu-map = <0x0 &smmu 0x0 0x10000>; + + dma-coherent; + }; + + smmu: smmu@2b400000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x2b400000 0x0 0x100000>; + interrupts = , + , + , + ; + interrupt-names = "eventq", "priq", "cmdq-sync", "gerror"; + dma-coherent; + #iommu-cells = <1>; + msi-parent = <&its 0x10000>; + }; + + panel { + compatible = "arm,rtsm-display", "panel-dpi"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; + + smb@8000000 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + + motherboard { + iofpga@3,00000000 { + clcd@1f0000 { + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + }; + }; + }; + }; +}; diff --git a/src/arm64/arm/juno-base.dtsi b/src/arm64/arm/juno-base.dtsi index ed774ee8f659..7446e0dc154d 100644 --- a/src/arm64/arm/juno-base.dtsi +++ b/src/arm64/arm/juno-base.dtsi @@ -18,7 +18,7 @@ status = "disabled"; frame@2a830000 { frame-number = <1>; - interrupts = <0 60 4>; + interrupts = ; reg = <0x0 0x2a830000 0x0 0x10000>; }; }; @@ -220,6 +220,41 @@ }; }; + replicator@20120000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + in-ports { + port { + replicator_in_port0: endpoint { + }; + }; + }; + }; + cpu_debug0: cpu-debug@22010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x22010000 0x0 0x1000>; @@ -452,41 +487,6 @@ }; }; - replicator@20120000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x20120000 0 0x1000>; - - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - power-domains = <&scpi_devpd 0>; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - }; - in-ports { - port { - replicator_in_port0: endpoint { - }; - }; - }; - }; - sram: sram@2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>; @@ -520,10 +520,10 @@ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, - <0 0 0 2 &gic 0 0 0 137 4>, - <0 0 0 3 &gic 0 0 0 138 4>, - <0 0 0 4 &gic 0 0 0 139 4>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; msi-parent = <&v2m_0>; status = "disabled"; iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ @@ -787,19 +787,19 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 &gic 0 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; }; site2: tlx@60000000 { @@ -809,6 +809,6 @@ ranges = <0 0 0x60000000 0x10000000>; #interrupt-cells = <1>; interrupt-map-mask = <0 0>; - interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/src/arm64/arm/juno-r1.dts b/src/arm64/arm/juno-r1.dts index b2b7ced633cf..5f290090b0cf 100644 --- a/src/arm64/arm/juno-r1.dts +++ b/src/arm64/arm/juno-r1.dts @@ -85,7 +85,7 @@ }; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -102,7 +102,7 @@ }; A57_1: cpu@1 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -119,7 +119,7 @@ }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -136,7 +136,7 @@ }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -153,7 +153,7 @@ }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -170,7 +170,7 @@ }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; diff --git a/src/arm64/arm/juno-r2.dts b/src/arm64/arm/juno-r2.dts index ab77adb4f3c2..305300dd521c 100644 --- a/src/arm64/arm/juno-r2.dts +++ b/src/arm64/arm/juno-r2.dts @@ -85,7 +85,7 @@ }; A72_0: cpu@0 { - compatible = "arm,cortex-a72","arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -99,10 +99,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; }; A72_1: cpu@1 { - compatible = "arm,cortex-a72","arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -116,10 +117,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <450>; }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -133,10 +135,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -150,10 +153,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -167,10 +171,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; @@ -184,6 +189,7 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <485>; + dynamic-power-coefficient = <140>; }; A72_L2: l2-cache0 { diff --git a/src/arm64/arm/juno.dts b/src/arm64/arm/juno.dts index 08d4ba1716c3..f00cffbd032c 100644 --- a/src/arm64/arm/juno.dts +++ b/src/arm64/arm/juno.dts @@ -84,7 +84,7 @@ }; A57_0: cpu@0 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; @@ -98,10 +98,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <530>; }; A57_1: cpu@1 { - compatible = "arm,cortex-a57","arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; @@ -115,10 +116,11 @@ clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <530>; }; A53_0: cpu@100 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; @@ -132,10 +134,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_1: cpu@101 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; @@ -149,10 +152,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_2: cpu@102 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; @@ -166,10 +170,11 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A53_3: cpu@103 { - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; @@ -183,6 +188,7 @@ clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <578>; + dynamic-power-coefficient = <140>; }; A57_L2: l2-cache0 { diff --git a/src/arm64/arm/rtsm_ve-aemv8a.dts b/src/arm64/arm/rtsm_ve-aemv8a.dts index fe4fda473c0a..6e685d883303 100644 --- a/src/arm64/arm/rtsm_ve-aemv8a.dts +++ b/src/arm64/arm/rtsm_ve-aemv8a.dts @@ -10,6 +10,8 @@ /dts-v1/; +#include + /memreserve/ 0x80000000 0x00010000; #include "rtsm_ve-motherboard.dtsi" @@ -101,24 +103,24 @@ <0x0 0x2c002000 0 0x2000>, <0x0 0x2c004000 0 0x2000>, <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = ; }; timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = , + , + , + ; clock-frequency = <100000000>; }; pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; + interrupts = , + , + , + ; }; panel { @@ -144,48 +146,48 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; + interrupt-map = <0 0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi b/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi new file mode 100644 index 000000000000..57b0b9d7f3fa --- /dev/null +++ b/src/arm64/arm/rtsm_ve-motherboard-rs2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Ltd. Fast Models + * + * "rs2" extension for the v2m motherboard + */ +/ { + smb@8000000 { + motherboard { + arm,v2m-memory-map = "rs2"; + + iofpga@3,00000000 { + virtio-p9@140000 { + compatible = "virtio,mmio"; + reg = <0x140000 0x200>; + interrupts = <43>; + }; + + virtio-net@150000 { + compatible = "virtio,mmio"; + reg = <0x150000 0x200>; + interrupts = <44>; + }; + }; + }; + }; +}; diff --git a/src/arm64/arm/rtsm_ve-motherboard.dtsi b/src/arm64/arm/rtsm_ve-motherboard.dtsi index b25f3cbd3da8..454cf6c44c49 100644 --- a/src/arm64/arm/rtsm_ve-motherboard.dtsi +++ b/src/arm64/arm/rtsm_ve-motherboard.dtsi @@ -86,7 +86,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_sysreg 0 0>; wp-gpios = <&v2m_sysreg 1 0>; max-frequency = <12000000>; @@ -167,6 +167,12 @@ clock-names = "timclken1", "timclken2", "apb_pclk"; }; + virtio-block@130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + rtc@170000 { compatible = "arm,pl031", "arm,primecell"; reg = <0x170000 0x1000>; @@ -193,12 +199,6 @@ }; }; }; - - virtio-block@130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; }; v2m_fixed_3v3: v2m-3v3 { diff --git a/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts index 8981c3d2ff18..22383c26bb03 100644 --- a/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -43,14 +43,14 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0>; next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 1>; next-level-cache = <&L2_0>; }; diff --git a/src/arm64/arm/vexpress-v2m-rs1.dtsi b/src/arm64/arm/vexpress-v2m-rs1.dtsi index a9569d15de41..d3963e9eaf48 100644 --- a/src/arm64/arm/vexpress-v2m-rs1.dtsi +++ b/src/arm64/arm/vexpress-v2m-rs1.dtsi @@ -133,7 +133,7 @@ mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; - interrupts = <9 10>; + interrupts = <9>, <10>; cd-gpios = <&v2m_mmc_gpios 0 0>; wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; diff --git a/src/arm64/bitmain/bm1880-sophon-edge.dts b/src/arm64/bitmain/bm1880-sophon-edge.dts new file mode 100644 index 000000000000..6a3255597138 --- /dev/null +++ b/src/arm64/bitmain/bm1880-sophon-edge.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Linaro Ltd. + * Author: Manivannan Sadhasivam + */ + +/dts-v1/; + +#include "bm1880.dtsi" + +/ { + compatible = "bitmain,sophon-edge", "bitmain,bm1880"; + model = "Sophon Edge"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + serial2 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB + }; + + uart_clk: uart-clk { + compatible = "fixed-clock"; + clock-frequency = <500000000>; + #clock-cells = <0>; + }; +}; + +&uart0 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart1 { + status = "okay"; + clocks = <&uart_clk>; +}; + +&uart2 { + status = "okay"; + clocks = <&uart_clk>; +}; diff --git a/src/arm64/bitmain/bm1880.dtsi b/src/arm64/bitmain/bm1880.dtsi new file mode 100644 index 000000000000..55a4769e0de2 --- /dev/null +++ b/src/arm64/bitmain/bm1880.dtsi @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Linaro Ltd. + * Author: Manivannan Sadhasivam + */ + +#include + +/ { + compatible = "bitmain,bm1880"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@100000000 { + reg = <0x1 0x00000000 0x0 0x20000>; + no-map; + }; + + jpu@130000000 { + reg = <0x1 0x30000000 0x0 0x08000000>; // 128M + no-map; + }; + + vpu@138000000 { + reg = <0x1 0x38000000 0x0 0x08000000>; // 128M + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@50001000 { + compatible = "arm,gic-400"; + reg = <0x0 0x50001000 0x0 0x1000>, + <0x0 0x50002000 0x0 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@58018000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x58018000 0x0 0x2000>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@5801A000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801a000 0x0 0x2000>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@5801C000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801c000 0x0 0x2000>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@5801E000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x5801e000 0x0 0x2000>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; +}; diff --git a/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts b/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts new file mode 100644 index 000000000000..f0ec56a1c4d7 --- /dev/null +++ b/src/arm64/broadcom/bcm2837-rpi-3-a-plus.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-3-a-plus.dts" diff --git a/src/arm64/broadcom/northstar2/ns2.dtsi b/src/arm64/broadcom/northstar2/ns2.dtsi index ea854f689fda..15f7b0ed3836 100644 --- a/src/arm64/broadcom/northstar2/ns2.dtsi +++ b/src/arm64/broadcom/northstar2/ns2.dtsi @@ -47,7 +47,7 @@ A57_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 0>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -55,7 +55,7 @@ A57_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -63,7 +63,7 @@ A57_2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 2>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -71,7 +71,7 @@ A57_3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0 3>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; diff --git a/src/arm64/broadcom/stingray/stingray.dtsi b/src/arm64/broadcom/stingray/stingray.dtsi index cfeaa855bd05..35c4670c00d1 100644 --- a/src/arm64/broadcom/stingray/stingray.dtsi +++ b/src/arm64/broadcom/stingray/stingray.dtsi @@ -44,7 +44,7 @@ cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -52,7 +52,7 @@ cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&CLUSTER0_L2>; @@ -60,7 +60,7 @@ cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; @@ -68,7 +68,7 @@ cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&CLUSTER1_L2>; @@ -76,7 +76,7 @@ cpu@200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&CLUSTER2_L2>; @@ -84,7 +84,7 @@ cpu@201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x201>; enable-method = "psci"; next-level-cache = <&CLUSTER2_L2>; @@ -92,7 +92,7 @@ cpu@300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&CLUSTER3_L2>; @@ -100,7 +100,7 @@ cpu@301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x301>; enable-method = "psci"; next-level-cache = <&CLUSTER3_L2>; diff --git a/src/arm64/cavium/thunder-88xx.dtsi b/src/arm64/cavium/thunder-88xx.dtsi index 1a9103b269cb..e0a71795261b 100644 --- a/src/arm64/cavium/thunder-88xx.dtsi +++ b/src/arm64/cavium/thunder-88xx.dtsi @@ -64,289 +64,289 @@ cpu@0 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x000>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x001>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x002>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x003>; enable-method = "psci"; }; cpu@4 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x004>; enable-method = "psci"; }; cpu@5 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x005>; enable-method = "psci"; }; cpu@6 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x006>; enable-method = "psci"; }; cpu@7 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x007>; enable-method = "psci"; }; cpu@8 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x008>; enable-method = "psci"; }; cpu@9 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x009>; enable-method = "psci"; }; cpu@a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00a>; enable-method = "psci"; }; cpu@b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00b>; enable-method = "psci"; }; cpu@c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00c>; enable-method = "psci"; }; cpu@d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00d>; enable-method = "psci"; }; cpu@e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00e>; enable-method = "psci"; }; cpu@f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x00f>; enable-method = "psci"; }; cpu@100 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x100>; enable-method = "psci"; }; cpu@101 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x101>; enable-method = "psci"; }; cpu@102 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x102>; enable-method = "psci"; }; cpu@103 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x103>; enable-method = "psci"; }; cpu@104 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x104>; enable-method = "psci"; }; cpu@105 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x105>; enable-method = "psci"; }; cpu@106 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x106>; enable-method = "psci"; }; cpu@107 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x107>; enable-method = "psci"; }; cpu@108 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x108>; enable-method = "psci"; }; cpu@109 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x109>; enable-method = "psci"; }; cpu@10a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10a>; enable-method = "psci"; }; cpu@10b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10b>; enable-method = "psci"; }; cpu@10c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10c>; enable-method = "psci"; }; cpu@10d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10d>; enable-method = "psci"; }; cpu@10e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10e>; enable-method = "psci"; }; cpu@10f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x10f>; enable-method = "psci"; }; cpu@200 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x200>; enable-method = "psci"; }; cpu@201 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x201>; enable-method = "psci"; }; cpu@202 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x202>; enable-method = "psci"; }; cpu@203 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x203>; enable-method = "psci"; }; cpu@204 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x204>; enable-method = "psci"; }; cpu@205 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x205>; enable-method = "psci"; }; cpu@206 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x206>; enable-method = "psci"; }; cpu@207 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x207>; enable-method = "psci"; }; cpu@208 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x208>; enable-method = "psci"; }; cpu@209 { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x209>; enable-method = "psci"; }; cpu@20a { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20a>; enable-method = "psci"; }; cpu@20b { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20b>; enable-method = "psci"; }; cpu@20c { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20c>; enable-method = "psci"; }; cpu@20d { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20d>; enable-method = "psci"; }; cpu@20e { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20e>; enable-method = "psci"; }; cpu@20f { device_type = "cpu"; - compatible = "cavium,thunder", "arm,armv8"; + compatible = "cavium,thunder"; reg = <0x0 0x20f>; enable-method = "psci"; }; diff --git a/src/arm64/cavium/thunder2-99xx.dtsi b/src/arm64/cavium/thunder2-99xx.dtsi index ff5c4c47b22b..0b7c935a4778 100644 --- a/src/arm64/cavium/thunder2-99xx.dtsi +++ b/src/arm64/cavium/thunder2-99xx.dtsi @@ -27,28 +27,28 @@ cpu@0 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan"; reg = <0x0 0x3>; enable-method = "psci"; }; diff --git a/src/arm64/exynos/exynos5433.dtsi b/src/arm64/exynos/exynos5433.dtsi index e7cd3b67d818..a04e80327b6e 100644 --- a/src/arm64/exynos/exynos5433.dtsi +++ b/src/arm64/exynos/exynos5433.dtsi @@ -29,7 +29,7 @@ cpu0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x100>; clock-frequency = <1300000000>; @@ -41,7 +41,7 @@ cpu1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x101>; clock-frequency = <1300000000>; @@ -51,7 +51,7 @@ cpu2: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x102>; clock-frequency = <1300000000>; @@ -61,7 +61,7 @@ cpu3: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x103>; clock-frequency = <1300000000>; @@ -71,7 +71,7 @@ cpu4: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x0>; clock-frequency = <1900000000>; @@ -83,7 +83,7 @@ cpu5: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x1>; clock-frequency = <1900000000>; @@ -93,7 +93,7 @@ cpu6: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x2>; clock-frequency = <1900000000>; @@ -103,7 +103,7 @@ cpu7: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; enable-method = "psci"; reg = <0x3>; clock-frequency = <1900000000>; diff --git a/src/arm64/exynos/exynos7.dtsi b/src/arm64/exynos/exynos7.dtsi index 75ad724c487e..967558a93d82 100644 --- a/src/arm64/exynos/exynos7.dtsi +++ b/src/arm64/exynos/exynos7.dtsi @@ -34,28 +34,28 @@ cpu_atlas0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; enable-method = "psci"; }; cpu_atlas1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; enable-method = "psci"; }; cpu_atlas2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x2>; enable-method = "psci"; }; cpu_atlas3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x3>; enable-method = "psci"; }; diff --git a/src/arm64/freescale/fsl-ls1012a-oxalis.dts b/src/arm64/freescale/fsl-ls1012a-oxalis.dts new file mode 100644 index 000000000000..7c726267ec8f --- /dev/null +++ b/src/arm64/freescale/fsl-ls1012a-oxalis.dts @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Oxalis + * + * Copyright (c) 2019 Manivannan Sadhasivam + * + */ + +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "Oxalis"; + compatible = "ebs-systart,oxalis", "fsl,ls1012a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: audio-codec@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/src/arm64/freescale/fsl-ls1012a.dtsi b/src/arm64/freescale/fsl-ls1012a.dtsi index 816f3a4537e3..1ce0042b2a14 100644 --- a/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/src/arm64/freescale/fsl-ls1012a.dtsi @@ -446,6 +446,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -486,6 +487,7 @@ #size-cells = <2>; device_type = "pci"; num-lanes = <4>; + num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/src/arm64/freescale/fsl-ls1028a-rdb.dts b/src/arm64/freescale/fsl-ls1028a-rdb.dts index fdeb4176fc33..f86b054a74ae 100644 --- a/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -71,3 +71,20 @@ &duart1 { status = "okay"; }; + +&enetc_port0 { + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; +}; + +&enetc_port1 { + status = "disabled"; +}; diff --git a/src/arm64/freescale/fsl-ls1028a.dtsi b/src/arm64/freescale/fsl-ls1028a.dtsi index a8cf92af05fb..2896bbcfa3bb 100644 --- a/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/src/arm64/freescale/fsl-ls1028a.dtsi @@ -335,5 +335,40 @@ , , , ; }; + + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ + compatible = "pci-host-ecam-generic"; + reg = <0x01 0xf0000000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + msi-parent = <&its>; + device_type = "pci"; + bus-range = <0x0 0x0>; + dma-coherent; + msi-map = <0 &its 0x17 0xe>; + iommu-map = <0 &smmu 0x17 0xe>; + /* PF0-6 BAR0 - non-prefetchable memory */ + ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 + /* PF0-6 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 + /* PF0: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 + /* PF0: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 + /* PF1: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 + /* PF1: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000>; + + enetc_port0: ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + }; + enetc_port1: ethernet@0,1 { + compatible = "fsl,enetc"; + reg = <0x000100 0 0 0 0>; + }; + }; }; }; diff --git a/src/arm64/freescale/fsl-ls1043a-qds.dts b/src/arm64/freescale/fsl-ls1043a-qds.dts index 8a500940f124..1aac81da7e37 100644 --- a/src/arm64/freescale/fsl-ls1043a-qds.dts +++ b/src/arm64/freescale/fsl-ls1043a-qds.dts @@ -137,7 +137,7 @@ &qspi { status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/src/arm64/freescale/fsl-ls1043a.dtsi b/src/arm64/freescale/fsl-ls1043a.dtsi index 70057b4e46e8..6fd6116509cc 100644 --- a/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/src/arm64/freescale/fsl-ls1043a.dtsi @@ -611,6 +611,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb3@3000000 { @@ -620,6 +621,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb2: usb3@3100000 { @@ -629,6 +631,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -675,6 +678,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -701,6 +705,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -727,6 +732,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ diff --git a/src/arm64/freescale/fsl-ls1046a-qds.dts b/src/arm64/freescale/fsl-ls1046a-qds.dts index 2f220ec4947b..eec62c63dafe 100644 --- a/src/arm64/freescale/fsl-ls1046a-qds.dts +++ b/src/arm64/freescale/fsl-ls1046a-qds.dts @@ -165,7 +165,7 @@ &qspi { status = "okay"; - qflash0: s25fl128s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/src/arm64/freescale/fsl-ls1046a-rdb.dts b/src/arm64/freescale/fsl-ls1046a-rdb.dts index 07c665c6e0dc..6a6514d0e5a9 100644 --- a/src/arm64/freescale/fsl-ls1046a-rdb.dts +++ b/src/arm64/freescale/fsl-ls1046a-rdb.dts @@ -101,7 +101,7 @@ &qspi { status = "okay"; - qflash0: s25fs512s@0 { + qflash0: flash@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; @@ -111,7 +111,7 @@ reg = <0>; }; - qflash1: s25fs512s@1 { + qflash1: flash@1 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; diff --git a/src/arm64/freescale/fsl-ls1046a.dtsi b/src/arm64/freescale/fsl-ls1046a.dtsi index 9a2106e60e19..cb7185014d3a 100644 --- a/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/src/arm64/freescale/fsl-ls1046a.dtsi @@ -202,6 +202,7 @@ compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = ; + status = "disabled"; }; qspi: spi@1550000 { @@ -424,6 +425,7 @@ reg = <0x00 0x21c0500 0x0 0x100>; interrupts = ; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart1: serial@21c0600 { @@ -431,6 +433,7 @@ reg = <0x00 0x21c0600 0x0 0x100>; interrupts = ; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart2: serial@21d0500 { @@ -438,6 +441,7 @@ reg = <0x0 0x21d0500 0x0 0x100>; interrupts = ; clocks = <&clockgen 4 1>; + status = "disabled"; }; duart3: serial@21d0600 { @@ -445,6 +449,7 @@ reg = <0x0 0x21d0600 0x0 0x100>; interrupts = ; clocks = <&clockgen 4 1>; + status = "disabled"; }; gpio0: gpio@2300000 { @@ -572,6 +577,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb@3000000 { @@ -581,6 +587,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb2: usb@3100000 { @@ -590,6 +597,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -644,6 +652,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -657,6 +666,17 @@ status = "disabled"; }; + pcie_ep@3400000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x40 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + pcie@3500000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ @@ -670,6 +690,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -683,6 +704,17 @@ status = "disabled"; }; + pcie_ep@3500000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x48 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + pcie@3600000 { compatible = "fsl,ls1046a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ @@ -696,6 +728,7 @@ device_type = "pci"; dma-coherent; num-lanes = <2>; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -709,6 +742,17 @@ status = "disabled"; }; + pcie_ep@3600000 { + compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x50 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + qdma: dma-controller@8380000 { compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ @@ -729,7 +773,6 @@ queue-sizes = <64 64>; big-endian; }; - }; reserved-memory { diff --git a/src/arm64/freescale/fsl-ls1088a.dtsi b/src/arm64/freescale/fsl-ls1088a.dtsi index de93b42b1f51..661137ffa319 100644 --- a/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/src/arm64/freescale/fsl-ls1088a.dtsi @@ -377,6 +377,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -452,6 +453,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <256>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -477,6 +479,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -502,6 +505,7 @@ device_type = "pci"; dma-coherent; num-lanes = <8>; + num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ @@ -515,6 +519,96 @@ status = "disabled"; }; + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + #global-interrupts = <12>; + // global secure fault + interrupts = , + // combined secure + , + // global non-secure fault + , + // combined non-secure + , + // performance counter interrupts 0-7 + , + , + , + , + , + , + , + , + // per context interrupt, 64 interrupts + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -576,6 +670,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -649,5 +745,4 @@ method = "smc"; }; }; - }; diff --git a/src/arm64/freescale/fsl-ls208xa.dtsi b/src/arm64/freescale/fsl-ls208xa.dtsi index 6d6ca166f86b..d7e78dcd153d 100644 --- a/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/src/arm64/freescale/fsl-ls208xa.dtsi @@ -627,6 +627,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -648,6 +649,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -669,6 +671,7 @@ device_type = "pci"; dma-coherent; num-lanes = <8>; + num-viewport = <256>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -690,6 +693,7 @@ device_type = "pci"; dma-coherent; num-lanes = <4>; + num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; #interrupt-cells = <1>; @@ -727,6 +731,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; usb1: usb3@3110000 { @@ -737,6 +742,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; ccn@4000000 { diff --git a/src/arm64/freescale/fsl-lx2160a-rdb.dts b/src/arm64/freescale/fsl-lx2160a-rdb.dts index 6481e5f20e69..9df37b159415 100644 --- a/src/arm64/freescale/fsl-lx2160a-rdb.dts +++ b/src/arm64/freescale/fsl-lx2160a-rdb.dts @@ -50,6 +50,32 @@ status = "okay"; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + &i2c0 { status = "okay"; diff --git a/src/arm64/freescale/fsl-lx2160a.dtsi b/src/arm64/freescale/fsl-lx2160a.dtsi index a79f5c1ea56d..fe87204850b5 100644 --- a/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/src/arm64/freescale/fsl-lx2160a.dtsi @@ -398,6 +398,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; @@ -542,6 +543,19 @@ status = "disabled"; }; + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = ; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; + esdhc0: esdhc@2140000 { compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; @@ -658,6 +672,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -668,6 +683,7 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; @@ -762,5 +778,122 @@ ; dma-coherent; }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, + <0x00000000 0x08340000 0 0x40000>; + msi-parent = <&its>; + /* iommu-map property is fixed up by u-boot */ + iommu-map = <0 &smmu 0 0>; + dma-coherent; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + + dpmac17: dpmac@11 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x11>; + }; + + dpmac18: dpmac@12 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x12>; + }; + }; + }; }; }; diff --git a/src/arm64/freescale/imx8mm-pinfunc.h b/src/arm64/freescale/imx8mm-pinfunc.h new file mode 100644 index 000000000000..e25f7fcd7997 --- /dev/null +++ b/src/arm64/freescale/imx8mm-pinfunc.h @@ -0,0 +1,629 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2017-2018 NXP + */ + +#ifndef __DTS_IMX8MM_PINFUNC_H +#define __DTS_IMX8MM_PINFUNC_H + +/* + * The pin function ID is a tuple of + * + */ + +#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B 0x030 0x298 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE 0x034 0x29C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG 0x038 0x2A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG 0x03C 0x2A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG 0x040 0x2A8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG 0x044 0x2AC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG 0x048 0x2B0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG 0x04C 0x2B4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x050 0x2B8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS 0x054 0x2BC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0 0x058 0x2C0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1 0x05C 0x2C4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR 0x060 0x2C8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2 0x060 0x2C8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x064 0x2CC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB 0x064 0x2CC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x31 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0 0x0D4 0x33C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1 0x0D8 0x340 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2 0x0DC 0x344 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3 0x0E0 0x348 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4 0x0E4 0x34C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK 0x0F0 0x358 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0 0x0F4 0x35C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1 0x0F8 0x360 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2 0x0FC 0x364 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3 0x100 0x368 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0 0x104 0x36C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1 0x108 0x370 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2 0x10C 0x374 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3 0x110 0x378 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4 0x114 0x37C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5 0x118 0x380 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6 0x11C 0x384 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7 0x120 0x388 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8 0x124 0x38C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9 0x128 0x390 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10 0x12C 0x394 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11 0x130 0x398 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12 0x134 0x39C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x000 0x12 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13 0x138 0x3A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x000 0x2 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14 0x13C 0x3A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0 0x140 0x3A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1 0x144 0x3AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2 0x148 0x3B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0 0x148 0x3B0 0x534 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3 0x14C 0x3B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC 0x14C 0x3B4 0x4CC 0x2 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1 0x14C 0x3B4 0x538 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1 +#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53c 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC 0x154 0x3BC 0x4CC 0x2 0x2 +#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3 0x154 0x3BC 0x540 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x52C 0x0 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK 0x158 0x3C0 0x4C8 0x1 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK 0x158 0x3C0 0x000 0x2 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK 0x158 0x3C0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC 0x15C 0x3C4 0x4C4 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC 0x15C 0x3C4 0x4E4 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK 0x15C 0x3C4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x15C 0x3C4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15 0x15C 0x3C4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK 0x160 0x3C8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK 0x160 0x3C8 0x4D0 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL 0x160 0x3C8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x160 0x3C8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16 0x160 0x3C8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0 0x164 0x3CC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0 0x164 0x3CC 0x4D4 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0 0x164 0x3CC 0x534 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0 0x164 0x3CC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x164 0x3CC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0 0x164 0x3CC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17 0x164 0x3CC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1 0x168 0x3D0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1 0x168 0x3D0 0x4D8 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1 0x168 0x3D0 0x538 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1 0x168 0x3D0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x168 0x3D0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1 0x168 0x3D0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18 0x168 0x3D0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2 0x16C 0x3D4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2 0x16C 0x3D4 0x4DC 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2 0x16C 0x3D4 0x53C 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2 0x16C 0x3D4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x16C 0x3D4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2 0x16C 0x3D4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19 0x16C 0x3D4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3 0x170 0x3D8 0x4E0 0x0 0x1 +#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3 0x170 0x3D8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3 0x170 0x3D8 0x540 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3 0x170 0x3D8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x170 0x3D8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3 0x170 0x3D8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20 0x170 0x3D8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4 0x174 0x3DC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x174 0x3DC 0x51C 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK 0x174 0x3DC 0x510 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4 0x174 0x3DC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x174 0x3DC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4 0x174 0x3DC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21 0x174 0x3DC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5 0x178 0x3E0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x178 0x3E0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0x178 0x3E0 0x514 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC 0x178 0x3E0 0x4C4 0x3 0x1 +#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5 0x178 0x3E0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x178 0x3E0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5 0x178 0x3E0 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22 0x178 0x3E0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6 0x17C 0x3E4 0x520 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x17C 0x3E4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0x17C 0x3E4 0x518 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6 0x17C 0x3E4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x17C 0x3E4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6 0x17C 0x3E4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23 0x17C 0x3E4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7 0x180 0x3E8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK 0x180 0x3E8 0x530 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC 0x180 0x3E8 0x4CC 0x2 0x4 +#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4 0x180 0x3E8 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7 0x180 0x3E8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x180 0x3E8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7 0x180 0x3E8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24 0x180 0x3E8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC 0x184 0x3EC 0x4CC 0x0 0x3 +#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC 0x184 0x3EC 0x4EC 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO 0x184 0x3EC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x184 0x3EC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25 0x184 0x3EC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK 0x188 0x3F0 0x4C8 0x0 0x1 +#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK 0x188 0x3F0 0x4E8 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI 0x188 0x3F0 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x188 0x3F0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26 0x188 0x3F0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0 0x18C 0x3F4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0 0x18C 0x3F4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8 0x18C 0x3F4 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x18C 0x3F4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8 0x18C 0x3F4 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27 0x18C 0x3F4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1 0x190 0x3F8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1 0x190 0x3F8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9 0x190 0x3F8 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x190 0x3F8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9 0x190 0x3F8 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28 0x190 0x3F8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2 0x194 0x3FC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2 0x194 0x3FC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10 0x194 0x3FC 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x194 0x3FC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10 0x194 0x3FC 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29 0x194 0x3FC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3 0x198 0x400 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3 0x198 0x400 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11 0x198 0x400 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x198 0x400 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11 0x198 0x400 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30 0x198 0x400 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4 0x19C 0x404 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0x19C 0x404 0x510 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK 0x19C 0x404 0x51C 0x2 0x1 +#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12 0x19C 0x404 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19C 0x404 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12 0x19C 0x404 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31 0x19C 0x404 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5 0x1A0 0x408 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x1A0 0x408 0x514 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0x1A0 0x408 0x000 0x2 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13 0x1A0 0x408 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x1A0 0x408 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13 0x1A0 0x408 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0 0x1A0 0x408 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6 0x1A4 0x40C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC 0x1A4 0x40C 0x518 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC 0x1A4 0x40C 0x520 0x2 0x1 +#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14 0x1A4 0x40C 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1A4 0x40C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14 0x1A4 0x40C 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1 0x1A4 0x40C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7 0x1A8 0x410 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK 0x1A8 0x410 0x530 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK 0x1A8 0x410 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15 0x1A8 0x410 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1A8 0x410 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15 0x1A8 0x410 0x000 0x6 0x0 +#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2 0x1A8 0x410 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK 0x1AC 0x414 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK 0x1AC 0x414 0x52C 0x1 0x1 +#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK 0x1AC 0x414 0x4C8 0x2 0x2 +#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK 0x1AC 0x414 0x000 0x3 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1AC 0x414 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT 0x1C0 0x428 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK 0x1C4 0x42C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x52C 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR 0x1C8 0x430 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3 0x1E0 0x448 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x52C 0x2 0x3 +#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4 0x1E4 0x44C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5 0x1E8 0x450 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6 0x1EC 0x454 0x000 0x7 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x000 0x0 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7 0x1F0 0x458 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8 0x1F4 0x45C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9 0x1F8 0x460 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10 0x1FC 0x464 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11 0x200 0x468 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12 0x204 0x46C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13 0x208 0x470 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14 0x20C 0x474 0x000 0x7 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x000 0x0 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15 0x210 0x478 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16 0x214 0x47C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17 0x218 0x480 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18 0x21C 0x484 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19 0x220 0x488 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20 0x224 0x48C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21 0x228 0x490 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x22C 0x494 0x524 0x12 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22 0x22C 0x494 0x000 0x7 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x000 0x0 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x230 0x498 0x528 0x2 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23 0x230 0x498 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24 0x234 0x49C 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x0 +#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25 0x238 0x4A0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26 0x23C 0x4A4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27 0x240 0x4A8 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28 0x244 0x4AC 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29 0x248 0x4B0 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x24C 0x4B4 0x524 0x2 0x1 +#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30 0x24C 0x4B4 0x000 0x7 0x0 +#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x250 0x4B8 0x528 0x2 0x1 +#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 +#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31 0x250 0x4B8 0x000 0x7 0x0 + +#endif /* __DTS_IMX8MM_PINFUNC_H */ diff --git a/src/arm64/freescale/imx8mq-evk.dts b/src/arm64/freescale/imx8mq-evk.dts index f74b13aa5aa5..54737bf1772f 100644 --- a/src/arm64/freescale/imx8mq-evk.dts +++ b/src/arm64/freescale/imx8mq-evk.dts @@ -37,7 +37,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; }; &i2c1 { @@ -137,6 +149,29 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -195,6 +230,18 @@ >; }; + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + pinctrl_reg_usdhc2: regusdhc2grpgpio { fsl,pins = < MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 diff --git a/src/arm64/freescale/imx8mq.dtsi b/src/arm64/freescale/imx8mq.dtsi index b6d31499fb43..9155bd4784eb 100644 --- a/src/arm64/freescale/imx8mq.dtsi +++ b/src/arm64/freescale/imx8mq.dtsi @@ -5,13 +5,13 @@ */ #include +#include #include #include #include "imx8mq-pinfunc.h" / { - /* This should really be the GPC, but we need a driver for this first */ - interrupt-parent = <&gic>; + interrupt-parent = <&gpc>; #address-cells = <2>; #size-cells = <2>; @@ -25,6 +25,9 @@ serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; }; ckil: clock-ckil { @@ -117,6 +120,13 @@ }; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + interrupt-parent = <&gic>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -137,6 +147,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; + dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; bus@30000000 { /* AIPS1 */ compatible = "fsl,imx8mq-aips-bus", "simple-bus"; @@ -199,36 +210,6 @@ #interrupt-cells = <2>; }; - iomuxc: iomuxc@30330000 { - compatible = "fsl,imx8mq-iomuxc"; - reg = <0x30330000 0x10000>; - }; - - iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; - reg = <0x30340000 0x10000>; - }; - - anatop: syscon@30360000 { - compatible = "fsl,imx8mq-anatop", "syscon"; - reg = <0x30360000 0x10000>; - interrupts = ; - }; - - clk: clock-controller@30380000 { - compatible = "fsl,imx8mq-ccm"; - reg = <0x30380000 0x10000>; - interrupts = , - ; - #clock-cells = <1>; - clocks = <&ckil>, <&osc_25m>, <&osc_27m>, - <&clk_ext1>, <&clk_ext2>, - <&clk_ext3>, <&clk_ext4>; - clock-names = "ckil", "osc_25m", "osc_27m", - "clk_ext1", "clk_ext2", - "clk_ext3", "clk_ext4"; - }; - wdog1: watchdog@30280000 { compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -252,6 +233,122 @@ clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; status = "disabled"; }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx8mq-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + iomuxc_gpr: syscon@30340000 { + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + anatop: syscon@30360000 { + compatible = "fsl,imx8mq-anatop", "syscon"; + reg = <0x30360000 0x10000>; + interrupts = ; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp{ + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap =<&snvs>; + offset = <0x34>; + interrupts = , + ; + }; + + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mq-ccm"; + reg = <0x30380000 0x10000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc_25m>, <&osc_27m>, + <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "ckil", "osc_25m", "osc_27m", + "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mq-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi: power-domain@0 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_pcie1: power-domain@1 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_ddr1: power-domain@4 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_gpu: power-domain@5 { + #power-domain-cells = <0>; + reg = ; + clocks = <&clk IMX8MQ_CLK_GPU_ROOT>, + <&clk IMX8MQ_CLK_GPU_SHADER_DIV>, + <&clk IMX8MQ_CLK_GPU_AXI>, + <&clk IMX8MQ_CLK_GPU_AHB>; + }; + + pgc_vpu: power-domain@6 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_disp: power-domain@7 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_mipi_csi1: power-domain@8 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_mipi_csi2: power-domain@9 { + #power-domain-cells = <0>; + reg = ; + }; + + pgc_pcie2: power-domain@a { + #power-domain-cells = <0>; + reg = ; + }; + }; + }; }; bus@30400000 { /* AIPS2 */ @@ -259,13 +356,94 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>, + <&clk IMX8MQ_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, + <&clk IMX8MQ_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>, + <&clk IMX8MQ_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>, + <&clk IMX8MQ_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; }; bus@30800000 { /* AIPS3 */ compatible = "fsl,imx8mq-aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x30800000 0x30800000 0x400000>; + ranges = <0x30800000 0x30800000 0x400000>, + <0x08000000 0x08000000 0x10000000>; + + ecspi1: spi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>, + <&clk IMX8MQ_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>, + <&clk IMX8MQ_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>, + <&clk IMX8MQ_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; uart1: serial@30860000 { compatible = "fsl,imx8mq-uart", @@ -383,6 +561,20 @@ status = "disabled"; }; + qspi0: spi@30bb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi"; + reg = <0x30bb0000 0x10000>, + <0x08000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>, + <&clk IMX8MQ_CLK_QSPI_ROOT>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + fec1: ethernet@30be0000 { compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; @@ -402,6 +594,70 @@ }; }; + usb_dwc3_0: usb@38100000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = ; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg1>; + usb3-resume-missing-cas; + status = "disabled"; + }; + + usb3_phy0: usb-phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_dwc3_1: usb@38200000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38200000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = ; + phys = <&usb3_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg2>; + usb3-resume-missing-cas; + status = "disabled"; + }; + + usb3_phy1: usb-phy@382f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x382f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/src/arm64/freescale/imx8qxp-mek.dts b/src/arm64/freescale/imx8qxp-mek.dts new file mode 100644 index 000000000000..03aad66545c5 --- /dev/null +++ b/src/arm64/freescale/imx8qxp-mek.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017~2018 NXP + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Freescale i.MX8QXP MEK"; + compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +}; diff --git a/src/arm64/freescale/imx8qxp.dtsi b/src/arm64/freescale/imx8qxp.dtsi new file mode 100644 index 000000000000..4c3dd95ed488 --- /dev/null +++ b/src/arm64/freescale/imx8qxp.dtsi @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng + */ + +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &adma_lpuart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters with 4 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", "tx1", "tx2", "tx3", + "rx0", "rx1", "rx2", "rx3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 0 1 + &lsio_mu1 0 2 + &lsio_mu1 0 3 + &lsio_mu1 1 0 + &lsio_mu1 1 1 + &lsio_mu1 1 2 + &lsio_mu1 1 3>; + + clk: clock-controller { + compatible = "fsl,imx8qxp-clk"; + #clock-cells = <1>; + clocks = <&xtal32k &xtal24m>; + clock-names = "xtal_32KHz", "xtal_24Mhz"; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + }; + + pd: imx8qx-pd { + compatible = "fsl,imx8qxp-scu-pd"; + #power-domain-cells = <1>; + }; + + rtc: rtc { + compatible = "fsl,imx8qxp-sc-rtc"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , /* Physical Secure */ + , /* Physical Non-Secure */ + , /* Virtual */ + ; /* Hypervisor */ + }; + + xtal32k: clock-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32KHz"; + }; + + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + + adma_subsys: bus@59000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x59000000 0x0 0x59000000 0x2000000>; + + adma_lpcg: clock-controller@59000000 { + compatible = "fsl,imx8qxp-lpcg-adma"; + reg = <0x59000000 0x2000000>; + #clock-cells = <1>; + }; + + adma_lpuart0: serial@5a060000 { + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x5a060000 0x1000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; + clock-names = "ipg"; + power-domains = <&pd IMX_SC_R_UART_0>; + status = "disabled"; + }; + + adma_i2c0: i2c@5a800000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a800000 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_0>; + status = "disabled"; + }; + + adma_i2c1: i2c@5a810000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a810000 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_1>; + status = "disabled"; + }; + + adma_i2c2: i2c@5a820000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a820000 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_2>; + status = "disabled"; + }; + + adma_i2c3: i2c@5a830000 { + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x5a830000 0x4000>; + interrupts = ; + interrupt-parent = <&gic>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; + clock-names = "per"; + assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd IMX_SC_R_I2C_3>; + status = "disabled"; + }; + }; + + conn_subsys: bus@5b000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; + + conn_lpcg: clock-controller@5b200000 { + compatible = "fsl,imx8qxp-lpcg-conn"; + reg = <0x5b200000 0xb0000>; + #clock-cells = <1>; + }; + + usdhc1: mmc@5b010000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = ; + reg = <0x5b010000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_0>; + status = "disabled"; + }; + + usdhc2: mmc@5b020000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = ; + reg = <0x5b020000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_1>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@5b030000 { + compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + interrupt-parent = <&gic>; + interrupts = ; + reg = <0x5b030000 0x10000>; + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, + <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; + clock-names = "ipg", "per", "ahb"; + assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; + assigned-clock-rates = <200000000>; + power-domains = <&pd IMX_SC_R_SDHC_2>; + status = "disabled"; + }; + + fec1: ethernet@5b040000 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + reg = <0x5b040000 0x10000>; + interrupts = , + , + , + ; + clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_0>; + status = "disabled"; + }; + + fec2: ethernet@5b050000 { + compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; + reg = <0x5b050000 0x10000>; + interrupts = , + , + , + ; + clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, + <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + power-domains = <&pd IMX_SC_R_ENET_1>; + status = "disabled"; + }; + }; + + lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; + + lsio_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg-lsio"; + reg = <0x5d400000 0x400000>; + #clock-cells = <1>; + }; + + lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = ; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1c0000 0x10000>; + interrupts = ; + #mbox-cells = <2>; + }; + + lsio_mu3: mailbox@5d1e0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1e0000 0x10000>; + interrupts = ; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1f0000 0x10000>; + interrupts = ; + #mbox-cells = <0>; + status = "disabled"; + }; + + lsio_gpio0: gpio@5d080000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d080000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_0>; + }; + + lsio_gpio1: gpio@5d090000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d090000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_1>; + }; + + lsio_gpio2: gpio@5d0a0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0a0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_2>; + }; + + lsio_gpio3: gpio@5d0b0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0b0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_3>; + }; + + lsio_gpio4: gpio@5d0c0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0c0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_4>; + }; + + lsio_gpio5: gpio@5d0d0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0d0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_5>; + }; + + lsio_gpio6: gpio@5d0e0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0e0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_6>; + }; + + lsio_gpio7: gpio@5d0f0000 { + compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; + reg = <0x5d0f0000 0x10000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + power-domains = <&pd IMX_SC_R_GPIO_7>; + }; + }; +}; diff --git a/src/arm64/hisilicon/hi3660-hikey960.dts b/src/arm64/hisilicon/hi3660-hikey960.dts index 46435466f1ab..e035cf195b19 100644 --- a/src/arm64/hisilicon/hi3660-hikey960.dts +++ b/src/arm64/hisilicon/hi3660-hikey960.dts @@ -581,8 +581,7 @@ sd-uhs-sdr50; sd-uhs-sdr104; disable-wp; - cd-inverted; - cd-gpios = <&gpio25 3 0>; + cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func diff --git a/src/arm64/hisilicon/hi3660.dtsi b/src/arm64/hisilicon/hi3660.dtsi index 20ae40df61d5..2f19e0e5b7cf 100644 --- a/src/arm64/hisilicon/hi3660.dtsi +++ b/src/arm64/hisilicon/hi3660.dtsi @@ -56,7 +56,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; @@ -70,7 +70,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; @@ -83,7 +83,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; @@ -96,7 +96,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; @@ -109,7 +109,7 @@ }; cpu4: cpu@100 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; @@ -123,7 +123,7 @@ }; cpu5: cpu@101 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; @@ -136,7 +136,7 @@ }; cpu6: cpu@102 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; @@ -149,7 +149,7 @@ }; cpu7: cpu@103 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; diff --git a/src/arm64/hisilicon/hi3670.dtsi b/src/arm64/hisilicon/hi3670.dtsi index a5bd6d80b226..2ed06e4588b8 100644 --- a/src/arm64/hisilicon/hi3670.dtsi +++ b/src/arm64/hisilicon/hi3670.dtsi @@ -56,56 +56,56 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; }; cpu4: cpu@100 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; }; cpu5: cpu@101 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; }; cpu6: cpu@102 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; }; cpu7: cpu@103 { - compatible = "arm,cortex-a73", "arm,armv8"; + compatible = "arm,cortex-a73"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; diff --git a/src/arm64/hisilicon/hi3798cv200-poplar.dts b/src/arm64/hisilicon/hi3798cv200-poplar.dts index 32716c96b457..c563d3eb2d98 100644 --- a/src/arm64/hisilicon/hi3798cv200-poplar.dts +++ b/src/arm64/hisilicon/hi3798cv200-poplar.dts @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * DTS File for HiSilicon Poplar Development Board * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. - * - * Released under the GPLv2 only. - * SPDX-License-Identifier: GPL-2.0 */ /dts-v1/; diff --git a/src/arm64/hisilicon/hi3798cv200.dtsi b/src/arm64/hisilicon/hi3798cv200.dtsi index 7c0fddd7c8cf..13821a0ff524 100644 --- a/src/arm64/hisilicon/hi3798cv200.dtsi +++ b/src/arm64/hisilicon/hi3798cv200.dtsi @@ -1,10 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * DTS File for HiSilicon Hi3798cv200 SoC. * * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. - * - * Released under the GPLv2 only. - * SPDX-License-Identifier: GPL-2.0 */ #include diff --git a/src/arm64/hisilicon/hi6220-hikey.dts b/src/arm64/hisilicon/hi6220-hikey.dts index 610235028cc7..c14205cd6bf5 100644 --- a/src/arm64/hisilicon/hi6220-hikey.dts +++ b/src/arm64/hisilicon/hi6220-hikey.dts @@ -118,6 +118,7 @@ reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; clocks = <&pmic>; clock-names = "ext_clock"; + post-power-on-delay-ms = <10>; power-off-delay-us = <10>; }; @@ -300,7 +301,6 @@ dwmmc_0: dwmmc0@f723d000 { cap-mmc-highspeed; - mmc-hs200-1_8v; non-removable; bus-width = <0x8>; vmmc-supply = <&ldo19>; diff --git a/src/arm64/hisilicon/hi6220.dtsi b/src/arm64/hisilicon/hi6220.dtsi index aec9e371c2a7..108e2a4227f6 100644 --- a/src/arm64/hisilicon/hi6220.dtsi +++ b/src/arm64/hisilicon/hi6220.dtsi @@ -81,7 +81,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; @@ -94,7 +94,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; @@ -107,7 +107,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; @@ -120,7 +120,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; @@ -133,7 +133,7 @@ }; cpu4: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; @@ -146,7 +146,7 @@ }; cpu5: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; @@ -159,7 +159,7 @@ }; cpu6: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; @@ -172,7 +172,7 @@ }; cpu7: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; @@ -319,6 +319,8 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; + dmas = <&dma0 8 &dma0 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/src/arm64/hisilicon/hip05.dtsi b/src/arm64/hisilicon/hip05.dtsi index 4b472a302cd8..d321edc09c3f 100644 --- a/src/arm64/hisilicon/hip05.dtsi +++ b/src/arm64/hisilicon/hip05.dtsi @@ -87,7 +87,7 @@ cpu0: cpu@20000 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -95,7 +95,7 @@ cpu1: cpu@20001 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -103,7 +103,7 @@ cpu2: cpu@20002 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -111,7 +111,7 @@ cpu3: cpu@20003 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -119,7 +119,7 @@ cpu4: cpu@20100 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -127,7 +127,7 @@ cpu5: cpu@20101 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -135,7 +135,7 @@ cpu6: cpu@20102 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -143,7 +143,7 @@ cpu7: cpu@20103 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -151,7 +151,7 @@ cpu8: cpu@20200 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -159,7 +159,7 @@ cpu9: cpu@20201 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -167,7 +167,7 @@ cpu10: cpu@20202 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -175,7 +175,7 @@ cpu11: cpu@20203 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -183,7 +183,7 @@ cpu12: cpu@20300 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -191,7 +191,7 @@ cpu13: cpu@20301 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -199,7 +199,7 @@ cpu14: cpu@20302 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -207,7 +207,7 @@ cpu15: cpu@20303 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x20303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; diff --git a/src/arm64/hisilicon/hip06.dtsi b/src/arm64/hisilicon/hip06.dtsi index d78a6a755d03..56625587b6de 100644 --- a/src/arm64/hisilicon/hip06.dtsi +++ b/src/arm64/hisilicon/hip06.dtsi @@ -87,7 +87,7 @@ cpu0: cpu@10000 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -95,7 +95,7 @@ cpu1: cpu@10001 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -103,7 +103,7 @@ cpu2: cpu@10002 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -111,7 +111,7 @@ cpu3: cpu@10003 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -119,7 +119,7 @@ cpu4: cpu@10100 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -127,7 +127,7 @@ cpu5: cpu@10101 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -135,7 +135,7 @@ cpu6: cpu@10102 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -143,7 +143,7 @@ cpu7: cpu@10103 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -151,7 +151,7 @@ cpu8: cpu@10200 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -159,7 +159,7 @@ cpu9: cpu@10201 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -167,7 +167,7 @@ cpu10: cpu@10202 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -175,7 +175,7 @@ cpu11: cpu@10203 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -183,7 +183,7 @@ cpu12: cpu@10300 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -191,7 +191,7 @@ cpu13: cpu@10301 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -199,7 +199,7 @@ cpu14: cpu@10302 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -207,7 +207,7 @@ cpu15: cpu@10303 { device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x10303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; diff --git a/src/arm64/hisilicon/hip07.dtsi b/src/arm64/hisilicon/hip07.dtsi index c33adefc3061..28bd4389441f 100644 --- a/src/arm64/hisilicon/hip07.dtsi +++ b/src/arm64/hisilicon/hip07.dtsi @@ -270,7 +270,7 @@ cpu0: cpu@10000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10000>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -279,7 +279,7 @@ cpu1: cpu@10001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10001>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -288,7 +288,7 @@ cpu2: cpu@10002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10002>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -297,7 +297,7 @@ cpu3: cpu@10003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10003>; enable-method = "psci"; next-level-cache = <&cluster0_l2>; @@ -306,7 +306,7 @@ cpu4: cpu@10100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10100>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -315,7 +315,7 @@ cpu5: cpu@10101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10101>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -324,7 +324,7 @@ cpu6: cpu@10102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10102>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -333,7 +333,7 @@ cpu7: cpu@10103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10103>; enable-method = "psci"; next-level-cache = <&cluster1_l2>; @@ -342,7 +342,7 @@ cpu8: cpu@10200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10200>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -351,7 +351,7 @@ cpu9: cpu@10201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10201>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -360,7 +360,7 @@ cpu10: cpu@10202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10202>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -369,7 +369,7 @@ cpu11: cpu@10203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10203>; enable-method = "psci"; next-level-cache = <&cluster2_l2>; @@ -378,7 +378,7 @@ cpu12: cpu@10300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10300>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -387,7 +387,7 @@ cpu13: cpu@10301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10301>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -396,7 +396,7 @@ cpu14: cpu@10302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10302>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -405,7 +405,7 @@ cpu15: cpu@10303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x10303>; enable-method = "psci"; next-level-cache = <&cluster3_l2>; @@ -414,7 +414,7 @@ cpu16: cpu@30000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30000>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -423,7 +423,7 @@ cpu17: cpu@30001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30001>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -432,7 +432,7 @@ cpu18: cpu@30002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30002>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -441,7 +441,7 @@ cpu19: cpu@30003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30003>; enable-method = "psci"; next-level-cache = <&cluster4_l2>; @@ -450,7 +450,7 @@ cpu20: cpu@30100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30100>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -459,7 +459,7 @@ cpu21: cpu@30101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30101>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -468,7 +468,7 @@ cpu22: cpu@30102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30102>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -477,7 +477,7 @@ cpu23: cpu@30103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30103>; enable-method = "psci"; next-level-cache = <&cluster5_l2>; @@ -486,7 +486,7 @@ cpu24: cpu@30200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30200>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -495,7 +495,7 @@ cpu25: cpu@30201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30201>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -504,7 +504,7 @@ cpu26: cpu@30202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30202>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -513,7 +513,7 @@ cpu27: cpu@30203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30203>; enable-method = "psci"; next-level-cache = <&cluster6_l2>; @@ -522,7 +522,7 @@ cpu28: cpu@30300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30300>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -531,7 +531,7 @@ cpu29: cpu@30301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30301>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -540,7 +540,7 @@ cpu30: cpu@30302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30302>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -549,7 +549,7 @@ cpu31: cpu@30303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x30303>; enable-method = "psci"; next-level-cache = <&cluster7_l2>; @@ -558,7 +558,7 @@ cpu32: cpu@50000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50000>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -567,7 +567,7 @@ cpu33: cpu@50001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50001>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -576,7 +576,7 @@ cpu34: cpu@50002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50002>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -585,7 +585,7 @@ cpu35: cpu@50003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50003>; enable-method = "psci"; next-level-cache = <&cluster8_l2>; @@ -594,7 +594,7 @@ cpu36: cpu@50100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50100>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -603,7 +603,7 @@ cpu37: cpu@50101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50101>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -612,7 +612,7 @@ cpu38: cpu@50102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50102>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -621,7 +621,7 @@ cpu39: cpu@50103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50103>; enable-method = "psci"; next-level-cache = <&cluster9_l2>; @@ -630,7 +630,7 @@ cpu40: cpu@50200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50200>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -639,7 +639,7 @@ cpu41: cpu@50201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50201>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -648,7 +648,7 @@ cpu42: cpu@50202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50202>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -657,7 +657,7 @@ cpu43: cpu@50203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50203>; enable-method = "psci"; next-level-cache = <&cluster10_l2>; @@ -666,7 +666,7 @@ cpu44: cpu@50300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50300>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -675,7 +675,7 @@ cpu45: cpu@50301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50301>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -684,7 +684,7 @@ cpu46: cpu@50302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50302>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -693,7 +693,7 @@ cpu47: cpu@50303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x50303>; enable-method = "psci"; next-level-cache = <&cluster11_l2>; @@ -702,7 +702,7 @@ cpu48: cpu@70000 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70000>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -711,7 +711,7 @@ cpu49: cpu@70001 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70001>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -720,7 +720,7 @@ cpu50: cpu@70002 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70002>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -729,7 +729,7 @@ cpu51: cpu@70003 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70003>; enable-method = "psci"; next-level-cache = <&cluster12_l2>; @@ -738,7 +738,7 @@ cpu52: cpu@70100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70100>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -747,7 +747,7 @@ cpu53: cpu@70101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70101>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -756,7 +756,7 @@ cpu54: cpu@70102 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70102>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -765,7 +765,7 @@ cpu55: cpu@70103 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70103>; enable-method = "psci"; next-level-cache = <&cluster13_l2>; @@ -774,7 +774,7 @@ cpu56: cpu@70200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70200>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -783,7 +783,7 @@ cpu57: cpu@70201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70201>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -792,7 +792,7 @@ cpu58: cpu@70202 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70202>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -801,7 +801,7 @@ cpu59: cpu@70203 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70203>; enable-method = "psci"; next-level-cache = <&cluster14_l2>; @@ -810,7 +810,7 @@ cpu60: cpu@70300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70300>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -819,7 +819,7 @@ cpu61: cpu@70301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70301>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -828,7 +828,7 @@ cpu62: cpu@70302 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70302>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; @@ -837,7 +837,7 @@ cpu63: cpu@70303 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x70303>; enable-method = "psci"; next-level-cache = <&cluster15_l2>; diff --git a/src/arm64/lg/lg1312.dtsi b/src/arm64/lg/lg1312.dtsi index 4bde7b6f2b11..c8dc9c20fba3 100644 --- a/src/arm64/lg/lg1312.dtsi +++ b/src/arm64/lg/lg1312.dtsi @@ -21,27 +21,27 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; diff --git a/src/arm64/lg/lg1313.dtsi b/src/arm64/lg/lg1313.dtsi index 16ced1ff1ad3..82c6645b58b7 100644 --- a/src/arm64/lg/lg1313.dtsi +++ b/src/arm64/lg/lg1313.dtsi @@ -21,27 +21,27 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&L2_0>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&L2_0>; diff --git a/src/arm64/marvell/armada-3720-espressobin.dts b/src/arm64/marvell/armada-3720-espressobin.dts index 846003bb480c..6be019e1888e 100644 --- a/src/arm64/marvell/armada-3720-espressobin.dts +++ b/src/arm64/marvell/armada-3720-espressobin.dts @@ -46,11 +46,16 @@ /* J9 */ &pcie0 { status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; }; /* J6 */ &sata { status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; }; /* J1 */ @@ -156,6 +161,11 @@ reg = <0>; label = "cpu"; ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@1 { @@ -196,6 +206,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; phy-mode = "rgmii-id"; status = "okay"; diff --git a/src/arm64/marvell/armada-3720-uDPU.dts b/src/arm64/marvell/armada-3720-uDPU.dts new file mode 100644 index 000000000000..bd4aab6092e0 --- /dev/null +++ b/src/arm64/marvell/armada-3720-uDPU.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid + */ + +/dts-v1/; + +#include +#include "armada-372x.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "methode,udpu", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + /* only bootloader is located on the SPI */ + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + lm75@48 { + status = "okay"; + compatible = "lm75"; + reg = <0x48>; + }; + + lm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; +}; + +ð0 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/src/arm64/marvell/armada-372x.dtsi b/src/arm64/marvell/armada-372x.dtsi index 6800945a88ad..5ce55bdbb995 100644 --- a/src/arm64/marvell/armada-372x.dtsi +++ b/src/arm64/marvell/armada-372x.dtsi @@ -18,7 +18,7 @@ cpus { cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x1>; clocks = <&nb_periph_clk 16>; enable-method = "psci"; diff --git a/src/arm64/marvell/armada-37xx.dtsi b/src/arm64/marvell/armada-37xx.dtsi index e05594ea15fb..f43c43168b00 100644 --- a/src/arm64/marvell/armada-37xx.dtsi +++ b/src/arm64/marvell/armada-37xx.dtsi @@ -42,7 +42,7 @@ #size-cells = <0>; cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&nb_periph_clk 16>; enable-method = "psci"; @@ -247,6 +247,35 @@ reg = <0x14000 0x60>; }; + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; @@ -271,11 +300,25 @@ function = "mii"; }; + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + sdio_pins: sdio-pins { groups = "sdio_sb"; function = "sdio"; }; + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; + function = "pcie"; + }; + + pcie_clkreq_pins: pcie-clkreq-pins { + groups = "pcie1_clkreq"; + function = "pcie"; + }; }; eth0: ethernet@30000 { @@ -305,18 +348,50 @@ compatible = "marvell,armada3700-xhci", "generic-xhci"; reg = <0x58000 0x4000>; + marvell,usb-misc-reg = <&usb32_syscon>; interrupts = ; clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; status = "disabled"; }; + usb2_utmi_otg_phy: phy@5d000 { + compatible = "marvell,a3700-utmi-otg-phy"; + reg = <0x5d000 0x800>; + marvell,usb-misc-reg = <&usb32_syscon>; + #phy-cells = <0>; + }; + + usb32_syscon: system-controller@5d800 { + compatible = "marvell,armada-3700-usb2-host-device-misc", + "syscon"; + reg = <0x5d800 0x800>; + }; + usb2: usb@5e000 { compatible = "marvell,armada-3700-ehci"; - reg = <0x5e000 0x2000>; + reg = <0x5e000 0x1000>; + marvell,usb-misc-reg = <&usb2_syscon>; interrupts = ; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; status = "disabled"; }; + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,a3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", + "syscon"; + reg = <0x5f800 0x800>; + }; + xor@60900 { compatible = "marvell,armada-3700-xor"; reg = <0x60900 0x100>, @@ -368,8 +443,9 @@ sata: sata@e0000 { compatible = "marvell,armada-3700-ahci"; - reg = <0xe0000 0x2000>; + reg = <0xe0000 0x178>; interrupts = ; + clocks = <&nb_periph_clk 1>; status = "disabled"; }; diff --git a/src/arm64/marvell/armada-7040-db.dts b/src/arm64/marvell/armada-7040-db.dts index 412efdb46e7c..d20d84ce7ca8 100644 --- a/src/arm64/marvell/armada-7040-db.dts +++ b/src/arm64/marvell/armada-7040-db.dts @@ -66,8 +66,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -169,8 +167,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/src/arm64/marvell/armada-8040-db.dts b/src/arm64/marvell/armada-8040-db.dts index 1bac437369a1..9f4f939ab65f 100644 --- a/src/arm64/marvell/armada-8040-db.dts +++ b/src/arm64/marvell/armada-8040-db.dts @@ -81,8 +81,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -214,8 +212,6 @@ status = "okay"; spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/src/arm64/marvell/armada-ap806-dual.dtsi b/src/arm64/marvell/armada-ap806-dual.dtsi index d3c0636558ff..861fd21922c4 100644 --- a/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/src/arm64/marvell/armada-ap806-dual.dtsi @@ -17,13 +17,13 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; diff --git a/src/arm64/marvell/armada-ap806-quad.dtsi b/src/arm64/marvell/armada-ap806-quad.dtsi index 01ea662afba8..2baafe12ebd4 100644 --- a/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/src/arm64/marvell/armada-ap806-quad.dtsi @@ -17,25 +17,25 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; }; cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; }; diff --git a/src/arm64/marvell/armada-ap806.dtsi b/src/arm64/marvell/armada-ap806.dtsi index 7f799cb5668e..91dad7e4ee59 100644 --- a/src/arm64/marvell/armada-ap806.dtsi +++ b/src/arm64/marvell/armada-ap806.dtsi @@ -283,6 +283,8 @@ ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; #thermal-sensor-cells = <1>; }; }; @@ -293,16 +295,26 @@ * The thermal IP features one internal sensor plus, if applicable, one * remote channel wired to one sensor per CPU. * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + * * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <1000>; - polling-delay = <1000>; + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ thermal-sensors = <&ap_thermal 0>; - trips { }; + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + cooling-maps { }; }; diff --git a/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi b/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi index b788cb63caf2..d1a7143ef3d4 100644 --- a/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/src/arm64/marvell/armada-ap810-ap0-octa-core.dtsi @@ -15,49 +15,49 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; }; cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; }; cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; }; cpu4: cpu@200 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x200>; enable-method = "psci"; }; cpu5: cpu@201 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x201>; enable-method = "psci"; }; cpu6: cpu@300 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x300>; enable-method = "psci"; }; cpu7: cpu@301 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x301>; enable-method = "psci"; }; diff --git a/src/arm64/marvell/armada-cp110.dtsi b/src/arm64/marvell/armada-cp110.dtsi index b9d9f31e3ba1..4d6e4a097f72 100644 --- a/src/arm64/marvell/armada-cp110.dtsi +++ b/src/arm64/marvell/armada-cp110.dtsi @@ -28,12 +28,19 @@ */ thermal-zones { CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <1000>; - polling-delay = <1000>; + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ thermal-sensors = <&CP110_LABEL(thermal) 0>; - trips { }; + trips { + CP110_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + cooling-maps { }; }; }; @@ -259,6 +266,8 @@ CP110_LABEL(thermal): thermal-sensor@70 { compatible = "marvell,armada-cp110-thermal"; reg = <0x70 0x10>; + interrupts-extended = + <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <1>; }; }; diff --git a/src/arm64/mediatek/mt2712-evb.dts b/src/arm64/mediatek/mt2712-evb.dts index 4ce9d6ca0bf7..2b91daf5c1a6 100644 --- a/src/arm64/mediatek/mt2712-evb.dts +++ b/src/arm64/mediatek/mt2712-evb.dts @@ -6,6 +6,7 @@ */ /dts-v1/; +#include #include "mt2712e.dtsi" / { @@ -39,6 +40,53 @@ regulator-max-microvolt = <1000000>; }; + extcon_usb: extcon_iddig { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>; + }; + + extcon_usb1: extcon_iddig1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>; + }; + + usb_p0_vbus: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "p0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p1_vbus: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "p1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p2_vbus: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "p2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p3_vbus: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "p3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + }; &auxadc { @@ -57,7 +105,57 @@ proc-supply = <&cpus_fixed_vproc1>; }; +&pio { + usb0_id_pins_float: usb0_iddig { + pins_iddig { + pinmux = ; + bias-pull-up; + }; + }; + + usb1_id_pins_float: usb1_iddig { + pins_iddig { + pinmux = ; + bias-pull-up; + }; + }; +}; + +&ssusb { + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + wakeup-source; + mediatek,u3p-dis-msk = <0x1>; + //enable-manual-drd; + //maximum-speed = "full-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_float>; + status = "okay"; +}; + +&ssusb1 { + vbus-supply = <&usb_p1_vbus>; + extcon = <&extcon_usb1>; + dr_mode = "otg"; + //mediatek,u3p-dis-msk = <0x1>; + enable-manual-drd; + wakeup-source; + //maximum-speed = "full-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_id_pins_float>; + status = "okay"; +}; + &uart0 { status = "okay"; }; +&usb_host0 { + vbus-supply = <&usb_p2_vbus>; + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; diff --git a/src/arm64/mediatek/mt2712e.dtsi b/src/arm64/mediatek/mt2712e.dtsi index ee627a7c7b45..976d92a94738 100644 --- a/src/arm64/mediatek/mt2712e.dtsi +++ b/src/arm64/mediatek/mt2712e.dtsi @@ -8,6 +8,8 @@ #include #include #include +#include +#include #include #include "mt2712-pinfunc.h" @@ -312,12 +314,33 @@ status = "disabled"; }; + iommu0: iommu@10205000 { + compatible = "mediatek,mt2712-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2 + &larb3 &larb6>; + #iommu-cells = <1>; + }; + apmixedsys: syscon@10209000 { compatible = "mediatek,mt2712-apmixedsys", "syscon"; reg = <0 0x10209000 0 0x1000>; #clock-cells = <1>; }; + iommu1: iommu@1020a000 { + compatible = "mediatek,mt2712-m4u"; + reg = <0 0x1020a000 0 0x1000>; + interrupts = ; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb4 &larb5 &larb7>; + #iommu-cells = <1>; + }; + mcucfg: syscon@10220000 { compatible = "mediatek,mt2712-mcucfg", "syscon"; reg = <0 0x10220000 0 0x1000>; @@ -395,6 +418,210 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt2712-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = ; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM0>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>, + <&pericfg CLK_PERI_PWM6>, + <&pericfg CLK_PERI_PWM7>; + clock-names = "top", + "main", + "pwm1", + "pwm2", + "pwm3", + "pwm4", + "pwm5", + "pwm6", + "pwm7", + "pwm8"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11007000 0 0x90>, + <0 0x11000180 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C0>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11008000 0 0x90>, + <0 0x11000200 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C1>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11009000 0 0x90>, + <0 0x11000280 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C2>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + nandc: nfi@1100e000 { + compatible = "mediatek,mt2712-nfc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>; + clock-names = "nfi_clk", "pad_clk"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bch: ecc@1100f000 { + compatible = "mediatek,mt2712-ecc"; + reg = <0 0x1100f000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + i2c3: i2c@11010000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11010000 0 0x90>, + <0 0x11000300 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C3>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11011000 0 0x90>, + <0 0x11000380 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C4>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11013000 { + compatible = "mediatek,mt2712-i2c"; + reg = <0 0x11013000 0 0x90>, + <0 0x11000100 0 0x80>; + interrupts = ; + clock-div = <4>; + clocks = <&pericfg CLK_PERI_I2C5>, + <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", + "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@11015000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11015000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11016000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11016000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@10012000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x10012000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11018000 { + compatible = "mediatek,mt2712-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x100>; + interrupts = ; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + uart4: serial@11019000 { compatible = "mediatek,mt2712-uart", "mediatek,mt6577-uart"; @@ -405,6 +632,228 @@ status = "disabled"; }; + mmc0: mmc@11230000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>, + <&pericfg CLK_PERI_MSDC30_0_QTR_EN>, + <&pericfg CLK_PERI_MSDC50_0_EN>; + clock-names = "source", "hclk", "bus_clk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_MSDC30_1>, + <&topckgen CLK_TOP_AXI_SEL>, + <&pericfg CLK_PERI_MSDC30_1_EN>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt2712-mmc"; + reg = <0 0x11250000 0 0x1000>; + interrupts = ; + clocks = <&pericfg CLK_PERI_MSDC30_2>, + <&topckgen CLK_TOP_AXI_SEL>, + <&pericfg CLK_PERI_MSDC30_2_EN>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + ssusb: usb@11271000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0 0x11271000 0 0x3000>, + <0 0x11280700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u2port1 PHY_TYPE_USB2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x510 2>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host0: xhci@11270000 { + compatible = "mediatek,mt2712-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = ; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + + u3phy0: usb-phy@11290000 { + compatible = "mediatek,mt2712-u3phy"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port0: usb-phy@11290000 { + reg = <0 0x11290000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11298000 { + reg = <0 0x11298000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port0: usb-phy@11298700 { + reg = <0 0x11298700 0 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + ssusb1: usb@112c1000 { + compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3"; + reg = <0 0x112c1000 0 0x3000>, + <0 0x112d0700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port2 PHY_TYPE_USB2>, + <&u2port3 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + mediatek,syscon-wakeup = <&pericfg 0x514 2>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host1: xhci@112c0000 { + compatible = "mediatek,mt2712-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112c0000 0 0x1000>; + reg-names = "mac"; + interrupts = ; + power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + + u3phy1: usb-phy@112e0000 { + compatible = "mediatek,mt2712-u3phy"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + u2port2: usb-phy@112e0000 { + reg = <0 0x112e0000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port3: usb-phy@112e8000 { + reg = <0 0x112e8000 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u3port1: usb-phy@112e8700 { + reg = <0 0x112e8700 0 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + + pcie: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>, + <0 0x112ff000 0 0x1000>; + reg-names = "port0", "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = , + ; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, + <&pericfg CLK_PERI_PCIE0>, + <&pericfg CLK_PERI_PCIE1>; + clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; + phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + pcie0: pcie@0,0 { + device_type = "pci"; + status = "disabled"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1,0 { + device_type = "pci"; + status = "disabled"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + num-lanes = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + mfgcfg: syscon@13000000 { compatible = "mediatek,mt2712-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; @@ -417,12 +866,85 @@ #clock-cells = <1>; }; + larb0: larb@14021000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14021000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <0>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + }; + + smi_common0: smi@14022000 { + compatible = "mediatek,mt2712-smi-common"; + reg = <0 0x14022000 0 0x1000>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_COMMON>; + clock-names = "apb", "smi"; + }; + + larb4: larb@14027000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14027000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <4>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB4>, + <&mmsys CLK_MM_SMI_LARB4>; + clock-names = "apb", "smi"; + }; + + larb5: larb@14030000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14030000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <5>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB5>, + <&mmsys CLK_MM_SMI_LARB5>; + clock-names = "apb", "smi"; + }; + + smi_common1: smi@14031000 { + compatible = "mediatek,mt2712-smi-common"; + reg = <0 0x14031000 0 0x1000>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_COMMON1>, + <&mmsys CLK_MM_SMI_COMMON1>; + clock-names = "apb", "smi"; + }; + + larb7: larb@14032000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x14032000 0 0x1000>; + mediatek,smi = <&smi_common1>; + mediatek,larb-id = <7>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_SMI_LARB7>, + <&mmsys CLK_MM_SMI_LARB7>; + clock-names = "apb", "smi"; + }; + imgsys: syscon@15000000 { compatible = "mediatek,mt2712-imgsys", "syscon"; reg = <0 0x15000000 0 0x1000>; #clock-cells = <1>; }; + larb2: larb@15001000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <2>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>; + clocks = <&imgsys CLK_IMG_SMI_LARB2>, + <&imgsys CLK_IMG_SMI_LARB2>; + clock-names = "apb", "smi"; + }; + bdpsys: syscon@15010000 { compatible = "mediatek,mt2712-bdpsys", "syscon"; reg = <0 0x15010000 0 0x1000>; @@ -435,12 +957,45 @@ #clock-cells = <1>; }; + larb1: larb@16010000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <1>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_CKEN>, + <&vdecsys CLK_VDEC_LARB1_CKEN>; + clock-names = "apb", "smi"; + }; + vencsys: syscon@18000000 { compatible = "mediatek,mt2712-vencsys", "syscon"; reg = <0 0x18000000 0 0x1000>; #clock-cells = <1>; }; + larb3: larb@18001000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x18001000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <3>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>, + <&vencsys CLK_VENC_VENC>; + clock-names = "apb", "smi"; + }; + + larb6: larb@18002000 { + compatible = "mediatek,mt2712-smi-larb"; + reg = <0 0x18002000 0 0x1000>; + mediatek,smi = <&smi_common0>; + mediatek,larb-id = <6>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>, + <&vencsys CLK_VENC_VENC>; + clock-names = "apb", "smi"; + }; + jpgdecsys: syscon@19000000 { compatible = "mediatek,mt2712-jpgdecsys", "syscon"; reg = <0 0x19000000 0 0x1000>; diff --git a/src/arm64/mediatek/mt6797-evb.dts b/src/arm64/mediatek/mt6797-evb.dts index c79109c65409..237e869a5fa1 100644 --- a/src/arm64/mediatek/mt6797-evb.dts +++ b/src/arm64/mediatek/mt6797-evb.dts @@ -33,4 +33,6 @@ &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; }; diff --git a/src/arm64/mediatek/mt6797-x20-dev.dts b/src/arm64/mediatek/mt6797-x20-dev.dts index 742938a1a548..13939d55b85b 100644 --- a/src/arm64/mediatek/mt6797-x20-dev.dts +++ b/src/arm64/mediatek/mt6797-x20-dev.dts @@ -30,4 +30,6 @@ &uart1 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; }; diff --git a/src/arm64/mediatek/mt6797.dtsi b/src/arm64/mediatek/mt6797.dtsi index 4beaa71107d7..2b2a69c7567f 100644 --- a/src/arm64/mediatek/mt6797.dtsi +++ b/src/arm64/mediatek/mt6797.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { compatible = "mediatek,mt6797"; @@ -129,6 +130,33 @@ #clock-cells = <1>; }; + pio: pinctrl@10005000 { + compatible = "mediatek,mt6797-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x400>, + <0 0x10002400 0 0x400>, + <0 0x10002800 0 0x400>, + <0 0x10002C00 0 0x400>; + reg-names = "gpio", "iocfgl", "iocfgb", + "iocfgr", "iocfgt"; + gpio-controller; + #gpio-cells = <2>; + + uart0_pins_a: uart0 { + pins0 { + pinmux = , + ; + }; + }; + + uart1_pins_a: uart1 { + pins1 { + pinmux = , + ; + }; + }; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt6797-scpsys"; #power-domain-cells = <1>; diff --git a/src/arm64/mediatek/mt7622.dtsi b/src/arm64/mediatek/mt7622.dtsi index 8fc4aa77f012..4b1f5ae710eb 100644 --- a/src/arm64/mediatek/mt7622.dtsi +++ b/src/arm64/mediatek/mt7622.dtsi @@ -70,7 +70,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; clocks = <&infracfg CLK_INFRA_MUX1_SEL>, <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; @@ -84,7 +84,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; clocks = <&infracfg CLK_INFRA_MUX1_SEL>, <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>; @@ -170,17 +170,20 @@ cooling-maps { map0 { trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&cpu_active>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map2 { trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/src/arm64/mediatek/mt8173.dtsi b/src/arm64/mediatek/mt8173.dtsi index 412ffd4d426b..c3c360161c5d 100644 --- a/src/arm64/mediatek/mt8173.dtsi +++ b/src/arm64/mediatek/mt8173.dtsi @@ -276,12 +276,14 @@ cooling-maps { map@0 { trip = <&target>; - cooling-device = <&cpu0 0 0>; + cooling-device = <&cpu0 0 0>, + <&cpu1 0 0>; contribution = <3072>; }; map@1 { trip = <&target>; - cooling-device = <&cpu2 0 0>; + cooling-device = <&cpu2 0 0>, + <&cpu3 0 0>; contribution = <1024>; }; }; diff --git a/src/arm64/nvidia/tegra132.dtsi b/src/arm64/nvidia/tegra132.dtsi index fa5a7c4bc807..631a7f77c386 100644 --- a/src/arm64/nvidia/tegra132.dtsi +++ b/src/arm64/nvidia/tegra132.dtsi @@ -1082,13 +1082,13 @@ cpu@0 { device_type = "cpu"; - compatible = "nvidia,denver", "arm,armv8"; + compatible = "nvidia,denver"; reg = <0>; }; cpu@1 { device_type = "cpu"; - compatible = "nvidia,denver", "arm,armv8"; + compatible = "nvidia,denver"; reg = <1>; }; }; diff --git a/src/arm64/nvidia/tegra186-p2771-0000.dts b/src/arm64/nvidia/tegra186-p2771-0000.dts index 65487eee2ce6..31457f32e4d0 100644 --- a/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -26,7 +26,8 @@ reg = <0x74>; interrupt-parent = <&gpio>; - interrupts = ; + interrupts = ; #gpio-cells = <2>; gpio-controller; @@ -37,7 +38,8 @@ reg = <0x77>; interrupt-parent = <&gpio>; - interrupts = ; + interrupts = ; #gpio-cells = <2>; gpio-controller; @@ -52,6 +54,7 @@ }; hda@3510000 { + nvidia,model = "jetson-tx2-hda"; status = "okay"; }; @@ -108,7 +111,8 @@ hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_MAIN_GPIO(P, 1) GPIO_ACTIVE_LOW>; + nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1) + GPIO_ACTIVE_LOW>; }; dpaux@155c0000 { @@ -121,7 +125,7 @@ power { label = "Power"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0) GPIO_ACTIVE_LOW>; linux,input-type = ; linux,code = ; @@ -132,7 +136,7 @@ volume-up { label = "Volume Up"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1) GPIO_ACTIVE_LOW>; linux,input-type = ; linux,code = ; @@ -141,7 +145,7 @@ volume-down { label = "Volume Down"; - gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2) + gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2) GPIO_ACTIVE_LOW>; linux,input-type = ; linux,code = ; @@ -158,7 +162,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) + GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; diff --git a/src/arm64/nvidia/tegra186-p3310.dtsi b/src/arm64/nvidia/tegra186-p3310.dtsi index b539561e7877..89a2da46efae 100644 --- a/src/arm64/nvidia/tegra186-p3310.dtsi +++ b/src/arm64/nvidia/tegra186-p3310.dtsi @@ -34,7 +34,8 @@ ethernet@2490000 { status = "okay"; - phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4) + GPIO_ACTIVE_LOW>; phy-handle = <&phy>; phy-mode = "rgmii"; @@ -46,7 +47,8 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; interrupt-parent = <&gpio>; - interrupts = ; + interrupts = ; }; }; }; @@ -91,8 +93,8 @@ /* SDMMC1 (SD/MMC) */ sdhci@3400000 { - cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; vqmmc-supply = <&vddio_sdmmc1>; }; diff --git a/src/arm64/nvidia/tegra186.dtsi b/src/arm64/nvidia/tegra186.dtsi index 22815db4a3ed..97aeb946ed5e 100644 --- a/src/arm64/nvidia/tegra186.dtsi +++ b/src/arm64/nvidia/tegra186.dtsi @@ -136,7 +136,7 @@ }; gen1_i2c: i2c@3160000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03160000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -149,7 +149,7 @@ }; cam_i2c: i2c@3180000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03180000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -163,7 +163,7 @@ /* shares pads with dpaux1 */ dp_aux_ch1_i2c: i2c@3190000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x03190000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -177,7 +177,7 @@ /* controlled by BPMP, should not be enabled */ pwr_i2c: i2c@31a0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031a0000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -191,7 +191,7 @@ /* shares pads with dpaux0 */ dp_aux_ch0_i2c: i2c@31b0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031b0000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -204,7 +204,7 @@ }; gen7_i2c: i2c@31c0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031c0000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -217,7 +217,7 @@ }; gen9_i2c: i2c@31e0000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x031e0000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -315,6 +315,8 @@ nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>; nvidia,default-tap = <0x5>; nvidia,default-trim = <0x9>; nvidia,dqs-trim = <63>; @@ -375,7 +377,7 @@ }; gen2_i2c: i2c@c240000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x0c240000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -388,7 +390,7 @@ }; gen8_i2c: i2c@c250000 { - compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra186-i2c", "nvidia,tegra210-i2c"; reg = <0x0 0x0c250000 0x0 0x10000>; interrupts = ; #address-cells = <1>; @@ -982,37 +984,37 @@ #size-cells = <0>; cpu@0 { - compatible = "nvidia,tegra186-denver", "arm,armv8"; + compatible = "nvidia,tegra186-denver"; device_type = "cpu"; reg = <0x000>; }; cpu@1 { - compatible = "nvidia,tegra186-denver", "arm,armv8"; + compatible = "nvidia,tegra186-denver"; device_type = "cpu"; reg = <0x001>; }; cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x100>; }; cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x101>; }; cpu@4 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x102>; }; cpu@5 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; device_type = "cpu"; reg = <0x103>; }; diff --git a/src/arm64/nvidia/tegra194-p2888.dtsi b/src/arm64/nvidia/tegra194-p2888.dtsi index 22a1c267aed9..246c1ebbd055 100644 --- a/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/src/arm64/nvidia/tegra194-p2888.dtsi @@ -10,7 +10,7 @@ aliases { sdhci0 = "/cbb/sdhci@3460000"; sdhci1 = "/cbb/sdhci@3400000"; - serial0 = &uartb; + serial0 = &tcu; i2c0 = "/bpmp/i2c"; i2c1 = "/cbb/i2c@3160000"; i2c2 = "/cbb/i2c@c240000"; diff --git a/src/arm64/nvidia/tegra194-p2972-0000.dts b/src/arm64/nvidia/tegra194-p2972-0000.dts index adf351010ff5..b62e96945846 100644 --- a/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -11,12 +11,17 @@ compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { + ddc: i2c@31c0000 { + status = "okay"; + }; + /* SDMMC1 (SD/MMC) */ sdhci@3400000 { status = "okay"; }; - ddc: i2c@31c0000 { + hda@3510000 { + nvidia,model = "jetson-xavier-hda"; status = "okay"; }; @@ -24,10 +29,6 @@ status = "okay"; }; - hda@3510000 { - status = "okay"; - }; - host1x@13e00000 { display-hub@15200000 { status = "okay"; diff --git a/src/arm64/nvidia/tegra194.dtsi b/src/arm64/nvidia/tegra194.dtsi index 6dfa1ca0b851..c77ca211fa8f 100644 --- a/src/arm64/nvidia/tegra194.dtsi +++ b/src/arm64/nvidia/tegra194.dtsi @@ -303,6 +303,17 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; status = "disabled"; }; @@ -314,6 +325,18 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; + nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x07>; + nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>; + nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>; + nvidia,default-tap = <0x9>; + nvidia,default-trim = <0x5>; status = "disabled"; }; @@ -323,8 +346,24 @@ interrupts = ; clocks = <&bpmp TEGRA194_CLK_SDMMC4>; clock-names = "sdhci"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>, + <&bpmp TEGRA194_CLK_PLLC4>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4>; resets = <&bpmp TEGRA194_RESET_SDMMC4>; reset-names = "sdhci"; + nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; + nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; + nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-1v8-timeout = + <0x0a>; + nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>; + nvidia,pad-autocal-pull-down-offset-3v3-timeout = + <0x0a>; + nvidia,default-tap = <0x8>; + nvidia,default-trim = <0x14>; + nvidia,dqs-trim = <40>; + supports-cqe; status = "disabled"; }; @@ -367,10 +406,35 @@ }; hsp_top0: hsp@3c00000 { - compatible = "nvidia,tegra186-hsp"; + compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; reg = <0x03c00000 0xa0000>; - interrupts = ; - interrupt-names = "doorbell"; + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "doorbell", "shared0", "shared1", "shared2", + "shared3", "shared4", "shared5", "shared6", + "shared7"; + #mbox-cells = <2>; + }; + + hsp_aon: hsp@c150000 { + compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; + reg = <0x0c150000 0xa0000>; + interrupts = , + , + , + ; + /* + * Shared interrupt 0 is routed only to AON/SPE, so + * we only have 4 shared interrupts for the CCPLEX. + */ + interrupt-names = "shared1", "shared2", "shared3", "shared4"; #mbox-cells = <2>; }; @@ -871,56 +935,56 @@ #size-cells = <0>; cpu@0 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10000>; enable-method = "psci"; }; cpu@1 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10001>; enable-method = "psci"; }; cpu@2 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; }; cpu@3 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; }; cpu@4 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; }; cpu@5 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; }; cpu@6 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10300>; enable-method = "psci"; }; cpu@7 { - compatible = "nvidia,tegra194-carmel", "arm,armv8"; + compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x10301>; enable-method = "psci"; @@ -933,6 +997,13 @@ method = "smc"; }; + tcu: tcu { + compatible = "nvidia,tegra194-tcu"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>, + <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>; + mbox-names = "rx", "tx"; + }; + thermal-zones { cpu { thermal-sensors = <&{/bpmp/thermal} diff --git a/src/arm64/nvidia/tegra210-p2371-2180.dts b/src/arm64/nvidia/tegra210-p2371-2180.dts index 37e3c46e753f..9fad0d27278e 100644 --- a/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -78,4 +78,25 @@ }; }; }; + + clock@70110000 { + status = "okay"; + + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,sample-rate = <25000>; + + nvidia,pwm-min-microvolts = <708000>; + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; + }; }; diff --git a/src/arm64/nvidia/tegra210-p2597.dtsi b/src/arm64/nvidia/tegra210-p2597.dtsi index a96e6ee70c21..95e890d8a119 100644 --- a/src/arm64/nvidia/tegra210-p2597.dtsi +++ b/src/arm64/nvidia/tegra210-p2597.dtsi @@ -1278,6 +1278,20 @@ nvidia,open-drain = ; }; }; + + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; + + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; }; pwm@7000a000 { @@ -1303,6 +1317,16 @@ clock-frequency = <100000>; }; + sata@70020000 { + status = "okay"; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + }; + + hda@70030000 { + nvidia,model = "jetson-tx1-hda"; + status = "okay"; + }; + usb@70090000 { phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, @@ -1325,15 +1349,6 @@ status = "okay"; }; - sata@70020000 { - status = "okay"; - phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; - }; - - hda@70030000 { - status = "okay"; - }; - padctl@7009f000 { status = "okay"; diff --git a/src/arm64/nvidia/tegra210-p2894-0050-a08.dts b/src/arm64/nvidia/tegra210-p2894-0050-a08.dts new file mode 100644 index 000000000000..7ffb351b5882 --- /dev/null +++ b/src/arm64/nvidia/tegra210-p2894-0050-a08.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra210-p2894.dtsi" + +/ { + model = "NVIDIA Shield TV"; + compatible = "nvidia,p2894-0050-a08", "nvidia,darcy", "nvidia,tegra210"; +}; diff --git a/src/arm64/nvidia/tegra210-p2894.dtsi b/src/arm64/nvidia/tegra210-p2894.dtsi new file mode 100644 index 000000000000..3ddf173ccc18 --- /dev/null +++ b/src/arm64/nvidia/tegra210-p2894.dtsi @@ -0,0 +1,1858 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include +#include +#include "tegra210.dtsi" + +/ { + aliases { + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + pinmux: pinmux@700008d4 { + status = "okay"; + pinctrl-names = "boot"; + pinctrl-0 = <&state_boot>; + + state_boot: pinmux { + pex_l0_rst_n_pa0 { + nvidia,pins = "pex_l0_rst_n_pa0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + pex_l0_clkreq_n_pa1 { + nvidia,pins = "pex_l0_clkreq_n_pa1"; + nvidia,function = "pe0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + pex_wake_n_pa2 { + nvidia,pins = "pex_wake_n_pa2"; + nvidia,function = "pe"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + pex_l1_rst_n_pa3 { + nvidia,pins = "pex_l1_rst_n_pa3"; + nvidia,function = "pe1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + pex_l1_clkreq_n_pa4 { + nvidia,pins = "pex_l1_clkreq_n_pa4"; + nvidia,function = "pe1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + sata_led_active_pa5 { + nvidia,pins = "sata_led_active_pa5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pa6 { + nvidia,pins = "pa6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap1_fs_pb0 { + nvidia,pins = "dap1_fs_pb0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap1_din_pb1 { + nvidia,pins = "dap1_din_pb1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap1_dout_pb2 { + nvidia,pins = "dap1_dout_pb2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap1_sclk_pb3 { + nvidia,pins = "dap1_sclk_pb3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi2_mosi_pb4 { + nvidia,pins = "spi2_mosi_pb4"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi2_miso_pb5 { + nvidia,pins = "spi2_miso_pb5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi2_sck_pb6 { + nvidia,pins = "spi2_sck_pb6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi2_cs0_pb7 { + nvidia,pins = "spi2_cs0_pb7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi1_mosi_pc0 { + nvidia,pins = "spi1_mosi_pc0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi1_miso_pc1 { + nvidia,pins = "spi1_miso_pc1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi1_sck_pc2 { + nvidia,pins = "spi1_sck_pc2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi1_cs0_pc3 { + nvidia,pins = "spi1_cs0_pc3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi1_cs1_pc4 { + nvidia,pins = "spi1_cs1_pc4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi4_sck_pc5 { + nvidia,pins = "spi4_sck_pc5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi4_cs0_pc6 { + nvidia,pins = "spi4_cs0_pc6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi4_mosi_pc7 { + nvidia,pins = "spi4_mosi_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spi4_miso_pd0 { + nvidia,pins = "spi4_miso_pd0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart3_tx_pd1 { + nvidia,pins = "uart3_tx_pd1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart3_rx_pd2 { + nvidia,pins = "uart3_rx_pd2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart3_rts_pd3 { + nvidia,pins = "uart3_rts_pd3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart3_cts_pd4 { + nvidia,pins = "uart3_cts_pd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic1_clk_pe0 { + nvidia,pins = "dmic1_clk_pe0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic1_dat_pe1 { + nvidia,pins = "dmic1_dat_pe1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic2_clk_pe2 { + nvidia,pins = "dmic2_clk_pe2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic2_dat_pe3 { + nvidia,pins = "dmic2_dat_pe3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic3_clk_pe4 { + nvidia,pins = "dmic3_clk_pe4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dmic3_dat_pe5 { + nvidia,pins = "dmic3_dat_pe5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pe6 { + nvidia,pins = "pe6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pe7 { + nvidia,pins = "pe7"; + nvidia,function = "pwm3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen3_i2c_scl_pf0 { + nvidia,pins = "gen3_i2c_scl_pf0"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + gen3_i2c_sda_pf1 { + nvidia,pins = "gen3_i2c_sda_pf1"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + uart2_tx_pg0 { + nvidia,pins = "uart2_tx_pg0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart2_rx_pg1 { + nvidia,pins = "uart2_rx_pg1"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart2_rts_pg2 { + nvidia,pins = "uart2_rts_pg2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart2_cts_pg3 { + nvidia,pins = "uart2_cts_pg3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + wifi_en_ph0 { + nvidia,pins = "wifi_en_ph0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + wifi_rst_ph1 { + nvidia,pins = "wifi_rst_ph1"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + wifi_wake_ap_ph2 { + nvidia,pins = "wifi_wake_ap_ph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + ap_wake_bt_ph3 { + nvidia,pins = "ap_wake_bt_ph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + bt_rst_ph4 { + nvidia,pins = "bt_rst_ph4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + bt_wake_ap_ph5 { + nvidia,pins = "bt_wake_ap_ph5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + ap_wake_nfc_ph7 { + nvidia,pins = "ap_wake_nfc_ph7"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + nfc_en_pi0 { + nvidia,pins = "nfc_en_pi0"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + nfc_int_pi1 { + nvidia,pins = "nfc_int_pi1"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gps_en_pi2 { + nvidia,pins = "gps_en_pi2"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gps_rst_pi3 { + nvidia,pins = "gps_rst_pi3"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart4_tx_pi4 { + nvidia,pins = "uart4_tx_pi4"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart4_rx_pi5 { + nvidia,pins = "uart4_rx_pi5"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart4_rts_pi6 { + nvidia,pins = "uart4_rts_pi6"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart4_cts_pi7 { + nvidia,pins = "uart4_cts_pi7"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gen1_i2c_sda_pj0 { + nvidia,pins = "gen1_i2c_sda_pj0"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + gen1_i2c_scl_pj1 { + nvidia,pins = "gen1_i2c_scl_pj1"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + gen2_i2c_scl_pj2 { + nvidia,pins = "gen2_i2c_scl_pj2"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + gen2_i2c_sda_pj3 { + nvidia,pins = "gen2_i2c_sda_pj3"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + dap4_fs_pj4 { + nvidia,pins = "dap4_fs_pj4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap4_din_pj5 { + nvidia,pins = "dap4_din_pj5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap4_dout_pj6 { + nvidia,pins = "dap4_dout_pj6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap4_sclk_pj7 { + nvidia,pins = "dap4_sclk_pj7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk5 { + nvidia,pins = "pk5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk6 { + nvidia,pins = "pk6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pl0 { + nvidia,pins = "pl0"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pl1 { + nvidia,pins = "pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_clk_pm0 { + nvidia,pins = "sdmmc1_clk_pm0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_cmd_pm1 { + nvidia,pins = "sdmmc1_cmd_pm1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_dat3_pm2 { + nvidia,pins = "sdmmc1_dat3_pm2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_dat2_pm3 { + nvidia,pins = "sdmmc1_dat2_pm3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_dat1_pm4 { + nvidia,pins = "sdmmc1_dat1_pm4"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc1_dat0_pm5 { + nvidia,pins = "sdmmc1_dat0_pm5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_clk_pp0 { + nvidia,pins = "sdmmc3_clk_pp0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_cmd_pp1 { + nvidia,pins = "sdmmc3_cmd_pp1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_dat3_pp2 { + nvidia,pins = "sdmmc3_dat3_pp2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_dat2_pp3 { + nvidia,pins = "sdmmc3_dat2_pp3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_dat1_pp4 { + nvidia,pins = "sdmmc3_dat1_pp4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc3_dat0_pp5 { + nvidia,pins = "sdmmc3_dat0_pp5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam1_mclk_ps0 { + nvidia,pins = "cam1_mclk_ps0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam2_mclk_ps1 { + nvidia,pins = "cam2_mclk_ps1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_i2c_scl_ps2 { + nvidia,pins = "cam_i2c_scl_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + cam_i2c_sda_ps3 { + nvidia,pins = "cam_i2c_sda_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + cam_rst_ps4 { + nvidia,pins = "cam_rst_ps4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_af_en_ps5 { + nvidia,pins = "cam_af_en_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam_flash_en_ps6 { + nvidia,pins = "cam_flash_en_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam1_pwdn_ps7 { + nvidia,pins = "cam1_pwdn_ps7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam2_pwdn_pt0 { + nvidia,pins = "cam2_pwdn_pt0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cam1_strobe_pt1 { + nvidia,pins = "cam1_strobe_pt1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart1_tx_pu0 { + nvidia,pins = "uart1_tx_pu0"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart1_rx_pu1 { + nvidia,pins = "uart1_rx_pu1"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart1_rts_pu2 { + nvidia,pins = "uart1_rts_pu2"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + uart1_cts_pu3 { + nvidia,pins = "uart1_cts_pu3"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_bl_pwm_pv0 { + nvidia,pins = "lcd_bl_pwm_pv0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_bl_en_pv1 { + nvidia,pins = "lcd_bl_en_pv1"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_rst_pv2 { + nvidia,pins = "lcd_rst_pv2"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_gpio1_pv3 { + nvidia,pins = "lcd_gpio1_pv3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_gpio2_pv4 { + nvidia,pins = "lcd_gpio2_pv4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + ap_ready_pv5 { + nvidia,pins = "ap_ready_pv5"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + touch_rst_pv6 { + nvidia,pins = "touch_rst_pv6"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + touch_clk_pv7 { + nvidia,pins = "touch_clk_pv7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + modem_wake_ap_px0 { + nvidia,pins = "modem_wake_ap_px0"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + touch_int_px1 { + nvidia,pins = "touch_int_px1"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + motion_int_px2 { + nvidia,pins = "motion_int_px2"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + als_prox_int_px3 { + nvidia,pins = "als_prox_int_px3"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + temp_alert_px4 { + nvidia,pins = "temp_alert_px4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + button_power_on_px5 { + nvidia,pins = "button_power_on_px5"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + button_vol_up_px6 { + nvidia,pins = "button_vol_up_px6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + button_vol_down_px7 { + nvidia,pins = "button_vol_down_px7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + button_slide_sw_py0 { + nvidia,pins = "button_slide_sw_py0"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + button_home_py1 { + nvidia,pins = "button_home_py1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + lcd_te_py2 { + nvidia,pins = "lcd_te_py2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pwr_i2c_scl_py3 { + nvidia,pins = "pwr_i2c_scl_py3"; + nvidia,function = "i2cpmu"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + pwr_i2c_sda_py4 { + nvidia,pins = "pwr_i2c_sda_py4"; + nvidia,function = "i2cpmu"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + clk_32k_out_py5 { + nvidia,pins = "clk_32k_out_py5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz0 { + nvidia,pins = "pz0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz1 { + nvidia,pins = "pz1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz2 { + nvidia,pins = "pz2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz3 { + nvidia,pins = "pz3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz4 { + nvidia,pins = "pz4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pz5 { + nvidia,pins = "pz5"; + nvidia,function = "soc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap2_fs_paa0 { + nvidia,pins = "dap2_fs_paa0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap2_sclk_paa1 { + nvidia,pins = "dap2_sclk_paa1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap2_din_paa2 { + nvidia,pins = "dap2_din_paa2"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dap2_dout_paa3 { + nvidia,pins = "dap2_dout_paa3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + aud_mclk_pbb0 { + nvidia,pins = "aud_mclk_pbb0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + dvfs_clk_pbb2 { + nvidia,pins = "dvfs_clk_pbb2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gpio_x1_aud_pbb3 { + nvidia,pins = "gpio_x1_aud_pbb3"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gpio_x3_aud_pbb4 { + nvidia,pins = "gpio_x3_aud_pbb4"; + nvidia,function = "rsvd0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + hdmi_cec_pcc0 { + nvidia,pins = "hdmi_cec_pcc0"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + hdmi_int_dp_hpd_pcc1 { + nvidia,pins = "hdmi_int_dp_hpd_pcc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + spdif_out_pcc2 { + nvidia,pins = "spdif_out_pcc2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + spdif_in_pcc3 { + nvidia,pins = "spdif_in_pcc3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + usb_vbus_en0_pcc4 { + nvidia,pins = "usb_vbus_en0_pcc4"; + nvidia,function = "usb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + usb_vbus_en1_pcc5 { + nvidia,pins = "usb_vbus_en1_pcc5"; + nvidia,function = "usb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + dp_hpd0_pcc6 { + nvidia,pins = "dp_hpd0_pcc6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pcc7 { + nvidia,pins = "pcc7"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + nvidia,io-hv = ; + }; + spi2_cs1_pdd0 { + nvidia,pins = "spi2_cs1_pdd0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_sck_pee0 { + nvidia,pins = "qspi_sck_pee0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_cs_n_pee1 { + nvidia,pins = "qspi_cs_n_pee1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_io0_pee2 { + nvidia,pins = "qspi_io0_pee2"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_io1_pee3 { + nvidia,pins = "qspi_io1_pee3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_io2_pee4 { + nvidia,pins = "qspi_io2_pee4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + qspi_io3_pee5 { + nvidia,pins = "qspi_io3_pee5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "core"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "jtag"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + clk_req { + nvidia,pins = "clk_req"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + shutdown { + nvidia,pins = "shutdown"; + nvidia,function = "shutdown"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + max77620: max77620@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = ; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux@0 { + pin_gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + pin_gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + pin_gpio2_3 { + pins = "gpio2", "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = ; + }; + + pin_gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + pin_gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + + pin_gpio2 { + maxim,active-fps-source = ; + }; + + pin_gpio3 { + maxim,active-fps-source = ; + }; + }; + + spmic-default-output-high { + gpio-hog; + output-high; + gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>; + }; + + fps { + #address-cells = <1>; + #size-cells = <0>; + + fps0 { + reg = <0>; + maxim,fps-event-source = ; + }; + + fps1 { + reg = <1>; + maxim,fps-event-source = ; + maxim,device-state-on-disabled-event = ; + }; + + fps2 { + reg = <2>; + maxim,fps-event-source = ; + }; + }; + + regulators { + in-ldo0-1-supply = <&max77620_sd2>; + in-ldo7-8-supply = <&max77620_sd2>; + + max77620_sd0: sd0 { + regulator-name = "vdd-core"; + regulator-enable-ramp-delay = <146>; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-power-up-slot = <0>; + maxim,active-fps-source = ; + }; + + max77620_sd1: sd1 { + regulator-name = "vddio-ddr"; + regulator-enable-ramp-delay = <130>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_sd2: sd2 { + regulator-name = "vdd-pre-reg"; + regulator-enable-ramp-delay = <176>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,suspend-fps-source = ; + }; + + max77620_sd3: sd3 { + regulator-name = "vdd-1v8"; + regulator-enable-ramp-delay = <242>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <27500>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo0: ldo0 { + regulator-name = "avdd-sys"; + regulator-enable-ramp-delay = <26>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-ramp-delay = <100000>; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo1: ldo1 { + regulator-name = "vdd-pex"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <1075000>; + regulator-max-microvolt = <1075000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo2: ldo2 { + regulator-name = "vddio-sdmmc3"; + regulator-enable-ramp-delay = <62>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + max77620_ldo3: ldo3 { + regulator-name = "vdd-3v3-eth"; + regulator-enable-ramp-delay = <50>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo4: ldo4 { + regulator-name = "vdd-rtc"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo5: ldo5 { + regulator-name = "avdd-ts-hv"; + regulator-enable-ramp-delay = <62>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + max77620_ldo6: ldo6 { + regulator-name = "vdd-ts"; + regulator-enable-ramp-delay = <36>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <100000>; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + + max77620_ldo7: ldo7 { + regulator-name = "vdd-gen-pll-edp"; + regulator-enable-ramp-delay = <24>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + maxim,suspend-fps-source = ; + }; + + max77620_ldo8: ldo8 { + regulator-name = "vdd-hdmi-dp"; + regulator-enable-ramp-delay = <22>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <100000>; + regulator-always-on; + regulator-boot-on; + + maxim,active-fps-source = ; + }; + }; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + status = "okay"; + }; + + sdhci@700b0600 { + bus-width = <8>; + non-removable; + status = "okay"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + status = "okay"; + + power { + debounce-interval = <30>; + gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + label = "Power"; + linux,code = ; + wakeup-event-action = ; + wakeup-source; + }; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + regulators { + compatible = "simple-bus"; + device_type = "fixed-regulators"; + #address-cells = <1>; + #size-cells = <0>; + + battery_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd-ac-bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd-3v3"; + regulator-enable-ramp-delay = <160>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + max77620_gpio7: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "max77620-gpio7"; + regulator-enable-ramp-delay = <240>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&max77620_ldo0>; + regulator-always-on; + regulator-boot-on; + + gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lcd_bl_en: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "lcd-bl-en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_sd: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "en-vdd-sd"; + regulator-enable-ramp-delay = <472>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; + + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_cam: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "en-vdd-cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_sys_boost: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd-sys-boost"; + regulator-enable-ramp-delay = <3090>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + + gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_hdmi: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd-hdmi"; + regulator-enable-ramp-delay = <468>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_sys_boost>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + en_vdd_cpu_fixed: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd-cpu-fixed"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vdd_aux_3v3: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "aux-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_snsr_pm: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "snsr_pm"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + }; + + vdd_usb_5v0: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + status = "disabled"; + regulator-name = "vdd-usb-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3>; + + enable-active-high; + }; + + vdd_cdc_1v2_aud: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + status = "disabled"; + regulator-name = "vdd_cdc_1v2_aud"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + startup-delay-us = <250000>; + + enable-active-high; + }; + + vdd_disp_3v0: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vdd-disp-3v0"; + regulator-enable-ramp-delay = <232>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + + gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vdd_fan: regulator@13 { + compatible = "regulator-fixed"; + reg = <13>; + regulator-name = "vdd-fan"; + regulator-enable-ramp-delay = <284>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_vbus1: regulator@14 { + compatible = "regulator-fixed"; + reg = <14>; + regulator-name = "usb-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + usb_vbus2: regulator@15 { + compatible = "regulator-fixed"; + reg = <15>; + regulator-name = "usb-vbus2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + vdd_3v3_eth: regulator@16 { + compatible = "regulator-fixed"; + reg = <16>; + regulator-name = "vdd-3v3-eth-a02"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + }; +}; diff --git a/src/arm64/nvidia/tegra210-smaug.dts b/src/arm64/nvidia/tegra210-smaug.dts index 43cae4798870..a4b8f668a6d4 100644 --- a/src/arm64/nvidia/tegra210-smaug.dts +++ b/src/arm64/nvidia/tegra210-smaug.dts @@ -1340,10 +1340,29 @@ status = "okay"; clock-frequency = <1000000>; + max77621_cpu: max77621@1b { + compatible = "maxim,max77621"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = ; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1231250>; + regulator-name = "PPVAR_CPU"; + regulator-ramp-delay = <12500>; + maxim,dvs-default-state = <1>; + maxim,enable-active-discharge; + maxim,enable-bias-control; + maxim,enable-etr; + maxim,enable-gpio = <&max77620 5 0>; + maxim,externally-enable; + }; + max77620: max77620@3c { compatible = "maxim,max77620"; reg = <0x3c>; - interrupts = <0 86 IRQ_TYPE_NONE>; + interrupts = ; #interrupt-cells = <2>; interrupt-controller; @@ -1679,6 +1698,18 @@ status = "okay"; }; + clock@70110000 { + status = "okay"; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,i2c-fs-rate = <400000>; + nvidia,sample-rate = <12500>; + vdd-cpu-supply = <&max77621_cpu>; + }; + aconnect@702c0000 { status = "okay"; @@ -1724,7 +1755,6 @@ gpio-keys { compatible = "gpio-keys"; - gpio-keys,name = "gpio-keys"; power { label = "Power"; diff --git a/src/arm64/nvidia/tegra210.dtsi b/src/arm64/nvidia/tegra210.dtsi index 2205d66b0443..6574396d2257 100644 --- a/src/arm64/nvidia/tegra210.dtsi +++ b/src/arm64/nvidia/tegra210.dtsi @@ -4,6 +4,7 @@ #include #include #include +#include #include #include @@ -469,13 +470,55 @@ apbmisc@70000800 { compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ - <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ + <0x0 0x70000008 0x0 0x04>; /* Strapping options */ }; pinmux: pinmux@700008d4 { compatible = "nvidia,tegra210-pinmux"; reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */ <0x0 0x70003000 0x0 0x294>; /* Mux registers */ + sdmmc1_3v3_drv: sdmmc1-3v3-drv { + sdmmc1 { + nvidia,pins = "drive_sdmmc1"; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; + }; + }; + sdmmc1_1v8_drv: sdmmc1-1v8-drv { + sdmmc1 { + nvidia,pins = "drive_sdmmc1"; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; + }; + }; + sdmmc2_1v8_drv: sdmmc2-1v8-drv { + sdmmc2 { + nvidia,pins = "drive_sdmmc2"; + nvidia,pull-down-strength = <0x10>; + nvidia,pull-up-strength = <0x10>; + }; + }; + sdmmc3_3v3_drv: sdmmc3-3v3-drv { + sdmmc3 { + nvidia,pins = "drive_sdmmc3"; + nvidia,pull-down-strength = <0x8>; + nvidia,pull-up-strength = <0x8>; + }; + }; + sdmmc3_1v8_drv: sdmmc3-1v8-drv { + sdmmc3 { + nvidia,pins = "drive_sdmmc3"; + nvidia,pull-down-strength = <0x4>; + nvidia,pull-up-strength = <0x3>; + }; + }; + sdmmc4_1v8_drv: sdmmc4-1v8-drv { + sdmmc4 { + nvidia,pins = "drive_sdmmc4"; + nvidia,pull-down-strength = <0x10>; + nvidia,pull-up-strength = <0x10>; + }; + }; }; /* @@ -554,7 +597,7 @@ }; i2c@7000c000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -569,7 +612,7 @@ }; i2c@7000c400 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -584,7 +627,7 @@ }; i2c@7000c500 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -599,7 +642,7 @@ }; i2c@7000c700 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -617,7 +660,7 @@ }; i2c@7000d000 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -632,7 +675,7 @@ }; i2c@7000d100 { - compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c"; + compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = ; #address-cells = <1>; @@ -1050,9 +1093,12 @@ clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8", + "sdmmc-3v3-drv", "sdmmc-1v8-drv"; pinctrl-0 = <&sdmmc1_3v3>; pinctrl-1 = <&sdmmc1_1v8>; + pinctrl-2 = <&sdmmc1_3v3_drv>; + pinctrl-3 = <&sdmmc1_1v8_drv>; nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; @@ -1075,6 +1121,8 @@ clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-1v8-drv"; + pinctrl-0 = <&sdmmc2_1v8_drv>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; nvidia,default-tap = <0x8>; @@ -1090,9 +1138,12 @@ clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; - pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8", + "sdmmc-3v3-drv", "sdmmc-1v8-drv"; pinctrl-0 = <&sdmmc3_3v3>; pinctrl-1 = <&sdmmc3_1v8>; + pinctrl-2 = <&sdmmc3_3v3_drv>; + pinctrl-3 = <&sdmmc3_1v8_drv>; nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>; nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>; @@ -1110,6 +1161,9 @@ clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; + pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv"; + pinctrl-0 = <&sdmmc4_1v8_drv>; + pinctrl-1 = <&sdmmc4_1v8_drv>; nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; nvidia,default-tap = <0x8>; @@ -1131,6 +1185,24 @@ #nvidia,mipi-calibrate-cells = <1>; }; + dfll: clock@70110000 { + compatible = "nvidia,tegra210-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>, + <&tegra_car TEGRA210_CLK_DFLL_REF>, + <&tegra_car TEGRA210_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + status = "disabled"; + }; + aconnect@702c0000 { compatible = "nvidia,tegra210-aconnect"; clocks = <&tegra_car TEGRA210_CLK_APE>, @@ -1285,6 +1357,12 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0>; + clocks = <&tegra_car TEGRA210_CLK_CCLK_G>, + <&tegra_car TEGRA210_CLK_PLL_X>, + <&tegra_car TEGRA210_CLK_PLL_P_OUT4>, + <&dfll>; + clock-names = "cpu_g", "pll_x", "pll_p", "dfll"; + clock-latency = <300000>; }; cpu@1 { diff --git a/src/arm64/qcom/apq8016-sbc.dtsi b/src/arm64/qcom/apq8016-sbc.dtsi index 46feedf7c989..134617d87a1a 100644 --- a/src/arm64/qcom/apq8016-sbc.dtsi +++ b/src/arm64/qcom/apq8016-sbc.dtsi @@ -644,6 +644,8 @@ l11 { regulator-min-microvolt = <1750000>; regulator-max-microvolt = <3337000>; + regulator-allow-set-load; + regulator-system-load = <200000>; }; l12 { diff --git a/src/arm64/qcom/ipq8074.dtsi b/src/arm64/qcom/ipq8074.dtsi index 18226980f7c3..aea1dbc3f53e 100644 --- a/src/arm64/qcom/ipq8074.dtsi +++ b/src/arm64/qcom/ipq8074.dtsi @@ -441,7 +441,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; @@ -449,7 +449,7 @@ CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x1>; next-level-cache = <&L2_0>; @@ -457,7 +457,7 @@ CPU2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x2>; next-level-cache = <&L2_0>; @@ -465,7 +465,7 @@ CPU3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; enable-method = "psci"; reg = <0x3>; next-level-cache = <&L2_0>; diff --git a/src/arm64/qcom/msm8916.dtsi b/src/arm64/qcom/msm8916.dtsi index c5348c3da5a2..0803ca8c02da 100644 --- a/src/arm64/qcom/msm8916.dtsi +++ b/src/arm64/qcom/msm8916.dtsi @@ -106,48 +106,48 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; CPU3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; cpu-idle-states = <&CPU_SPC>; - clocks = <&apcs 0>; + clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; }; diff --git a/src/arm64/qcom/msm8992.dtsi b/src/arm64/qcom/msm8992.dtsi index cf5cacdd624d..50cefb822d6d 100644 --- a/src/arm64/qcom/msm8992.dtsi +++ b/src/arm64/qcom/msm8992.dtsi @@ -38,7 +38,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; L2_0: l2-cache { diff --git a/src/arm64/qcom/msm8994.dtsi b/src/arm64/qcom/msm8994.dtsi index f33c41d01c86..6a4049aae0c3 100644 --- a/src/arm64/qcom/msm8994.dtsi +++ b/src/arm64/qcom/msm8994.dtsi @@ -40,7 +40,7 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; next-level-cache = <&L2_0>; L2_0: l2-cache { diff --git a/src/arm64/qcom/msm8996-pins.dtsi b/src/arm64/qcom/msm8996-pins.dtsi index 8d5114d16d09..131878db9852 100644 --- a/src/arm64/qcom/msm8996-pins.dtsi +++ b/src/arm64/qcom/msm8996-pins.dtsi @@ -139,7 +139,7 @@ }; pinconf { - pins = "gpio4", "gpiio5", "gpio6", "gpio7"; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; drive-strength = <2>; bias-disable; }; diff --git a/src/arm64/qcom/msm8996.dtsi b/src/arm64/qcom/msm8996.dtsi index 838e32cc14c9..c761269caf80 100644 --- a/src/arm64/qcom/msm8996.dtsi +++ b/src/arm64/qcom/msm8996.dtsi @@ -306,6 +306,40 @@ #clock-cells = <1>; }; + rpmpd: power-controller { + compatible = "qcom,msm8996-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp1: opp1 { + opp-level = <1>; + }; + + rpmpd_opp2: opp2 { + opp-level = <2>; + }; + + rpmpd_opp3: opp3 { + opp-level = <3>; + }; + + rpmpd_opp4: opp4 { + opp-level = <4>; + }; + + rpmpd_opp5: opp5 { + opp-level = <5>; + }; + + rpmpd_opp6: opp6 { + opp-level = <6>; + }; + }; + }; + pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -966,7 +1000,7 @@ clock-names = "iface", "bus"; #iommu-cells = <1>; - status = "ok"; + status = "disabled"; }; camss: camss@a00000 { diff --git a/src/arm64/qcom/msm8998-mtp.dtsi b/src/arm64/qcom/msm8998-mtp.dtsi index 50e9033aa7f6..f0901067b043 100644 --- a/src/arm64/qcom/msm8998-mtp.dtsi +++ b/src/arm64/qcom/msm8998-mtp.dtsi @@ -65,6 +65,13 @@ status = "okay"; }; +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -192,6 +199,8 @@ vreg_l21a_2p95: l21 { regulator-min-microvolt = <2960000>; regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; }; vreg_l22a_2p85: l22 { regulator-min-microvolt = <2864000>; @@ -257,3 +266,18 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/src/arm64/qcom/msm8998.dtsi b/src/arm64/qcom/msm8998.dtsi index 99bccaac31ad..3fd0769fe648 100644 --- a/src/arm64/qcom/msm8998.dtsi +++ b/src/arm64/qcom/msm8998.dtsi @@ -3,6 +3,7 @@ #include #include +#include #include / { @@ -266,6 +267,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8998"; qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; + #clock-cells = <1>; + }; }; }; @@ -540,6 +546,11 @@ reg = <0x780000 0x621c>; #address-cells = <1>; #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@423a { + reg = <0x423a 0x1>; + bits = <0 4>; + }; }; gcc: clock-controller@100000 { @@ -607,6 +618,93 @@ #mbox-cells = <1>; }; + usb3: usb@a8f8800 { + compatible = "qcom,msm8998-dwc3", "qcom,dwc3"; + reg = <0x0a8f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE1_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB_30_GDSC>; + + resets = <&gcc GCC_USB_30_BCR>; + + usb3_dwc3: dwc3@a800000 { + compatible = "snps,dwc3"; + reg = <0x0a800000 0xcd00>; + interrupts = ; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&qusb2phy>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + }; + }; + + usb3phy: phy@c010000 { + compatible = "qcom,msm8998-qmp-usb3-phy"; + reg = <0x0c010000 0x18c>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + usb1_ssphy: lane@c010200 { + reg = <0xc010200 0x128>, + <0xc010400 0x200>, + <0xc010c00 0x20c>, + <0xc010600 0x128>, + <0xc010800 0x200>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + qusb2phy: phy@c012000 { + compatible = "qcom,msm8998-qusb2-phy"; + reg = <0x0c012000 0x2a8>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2_hstx_trim>; + }; + sdhc2: sdhci@c0a4900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; @@ -624,6 +722,186 @@ status = "disabled"; }; + blsp1_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c5: i2c@c179000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c179000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@c17a000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c17a000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c0: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c1: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c2: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c3: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c4: i2c@c1b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b9000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_i2c5: i2c@c1ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp2_uart1: serial@c1b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xc1b0000 0x1000>; diff --git a/src/arm64/qcom/pm8005.dtsi b/src/arm64/qcom/pm8005.dtsi index 4d5aca3eeb69..c0ddf128136c 100644 --- a/src/arm64/qcom/pm8005.dtsi +++ b/src/arm64/qcom/pm8005.dtsi @@ -16,10 +16,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/src/arm64/qcom/pm8916.dtsi b/src/arm64/qcom/pm8916.dtsi index 15a37cbcd216..9dd2df1cbf47 100644 --- a/src/arm64/qcom/pm8916.dtsi +++ b/src/arm64/qcom/pm8916.dtsi @@ -32,6 +32,12 @@ bias-pull-up; linux,code = ; }; + + watchdog { + compatible = "qcom,pm8916-wdt"; + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; + timeout-sec = <60>; + }; }; pm8916_gpios: gpios@c000 { diff --git a/src/arm64/qcom/pm8998.dtsi b/src/arm64/qcom/pm8998.dtsi index f1025a50c227..43cb5ea14089 100644 --- a/src/arm64/qcom/pm8998.dtsi +++ b/src/arm64/qcom/pm8998.dtsi @@ -94,32 +94,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>, - <0 0xd6 0 IRQ_TYPE_NONE>, - <0 0xd7 0 IRQ_TYPE_NONE>, - <0 0xd8 0 IRQ_TYPE_NONE>, - <0 0xd9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/src/arm64/qcom/pmi8994.dtsi b/src/arm64/qcom/pmi8994.dtsi index dae1cdc23f54..3aee10e3f921 100644 --- a/src/arm64/qcom/pmi8994.dtsi +++ b/src/arm64/qcom/pmi8994.dtsi @@ -15,16 +15,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <2 0xc0 0 IRQ_TYPE_NONE>, - <2 0xc1 0 IRQ_TYPE_NONE>, - <2 0xc2 0 IRQ_TYPE_NONE>, - <2 0xc3 0 IRQ_TYPE_NONE>, - <2 0xc4 0 IRQ_TYPE_NONE>, - <2 0xc5 0 IRQ_TYPE_NONE>, - <2 0xc6 0 IRQ_TYPE_NONE>, - <2 0xc7 0 IRQ_TYPE_NONE>, - <2 0xc8 0 IRQ_TYPE_NONE>, - <2 0xc9 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/src/arm64/qcom/pmi8998.dtsi b/src/arm64/qcom/pmi8998.dtsi index da3285e216e2..051f57e7d6ac 100644 --- a/src/arm64/qcom/pmi8998.dtsi +++ b/src/arm64/qcom/pmi8998.dtsi @@ -14,20 +14,8 @@ reg = <0xc000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; }; diff --git a/src/arm64/qcom/pms405.dtsi b/src/arm64/qcom/pms405.dtsi index ad2b62dfc9f6..1bb836d1e8aa 100644 --- a/src/arm64/qcom/pms405.dtsi +++ b/src/arm64/qcom/pms405.dtsi @@ -3,6 +3,32 @@ #include #include +#include +#include + +/ { + thermal-zones { + pms405 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pms405_temp>; + + trips { + pms405_alert0: pms405-alert0 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + pms405_crit: pms405-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { pms405_0: pms405@0 { @@ -45,6 +71,59 @@ }; }; + pms405_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pms405_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pms405_adc: adc@3100 { + compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + ref_gnd { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vref_1p25 { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + vph_pwr { + reg = ; + qcom,pre-scaling = <1 3>; + }; + + die_temp { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + xo_therm_100k_pu { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + amux_thm1_100k_pu { + reg = ; + qcom,pre-scaling = <1 1>; + }; + + amux_thm3_100k_pu { + reg = ; + qcom,pre-scaling = <1 1>; + }; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; diff --git a/src/arm64/qcom/qcs404-evb.dtsi b/src/arm64/qcom/qcs404-evb.dtsi index a39924efebe4..50b3589c7f15 100644 --- a/src/arm64/qcom/qcs404-evb.dtsi +++ b/src/arm64/qcom/qcs404-evb.dtsi @@ -127,6 +127,7 @@ status = "ok"; mmc-ddr-1_8v; + mmc-hs400-1_8v; bus-width = <8>; non-removable; @@ -186,3 +187,21 @@ }; }; }; + +&wifi { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in qcs404.dtsi */ + +&blsp1_uart2_default { + rx { + drive-strength = <2>; + bias-disable; + }; + + tx { + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/src/arm64/qcom/qcs404.dtsi b/src/arm64/qcom/qcs404.dtsi index 9b5c16562bbe..e8fd26633d57 100644 --- a/src/arm64/qcom/qcs404.dtsi +++ b/src/arm64/qcom/qcs404.dtsi @@ -3,6 +3,7 @@ #include #include +#include / { interrupt-parent = <&intc>; @@ -224,6 +225,11 @@ rpm_requests: glink-channel { compatible = "qcom,rpm-qcs404"; qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcs404"; + #clock-cells = <1>; + }; }; }; @@ -272,6 +278,105 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + blsp1_i2c0_default: blsp1-i2c0-default { + pins = "gpio32", "gpio33"; + function = "blsp_i2c0"; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + sda { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio84", "gpio85"; + function = "blsp_i2c3"; + }; + + blsp1_i2c4_default: blsp1-i2c4-default { + pins = "gpio117", "gpio118"; + function = "blsp_i2c4"; + }; + + blsp1_uart0_default: blsp1-uart0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_uart0"; + }; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio22", "gpio23"; + function = "blsp_uart1"; + }; + + blsp1_uart2_default: blsp1-uart2-default { + rx { + pins = "gpio18"; + function = "blsp_uart_rx_a2"; + }; + + tx { + pins = "gpio17"; + function = "blsp_uart_tx_a2"; + }; + }; + + blsp1_uart3_default: blsp1-uart3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_uart3"; + }; + + blsp2_i2c0_default: blsp2-i2c0-default { + pins = "gpio28", "gpio29"; + function = "blsp_i2c5"; + }; + + blsp1_spi0_default: blsp1-spi0-default { + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + function = "blsp_spi0"; + }; + + blsp1_spi1_default: blsp1-spi1-default { + pins = "gpio22", "gpio23", "gpio24", "gpio25"; + function = "blsp_spi1"; + }; + + blsp1_spi2_default: blsp1-spi2-default { + pins = "gpio17", "gpio18", "gpio19", "gpio20"; + function = "blsp_spi2"; + }; + + blsp1_spi3_default: blsp1-spi3-default { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "blsp_spi3"; + }; + + blsp1_spi4_default: blsp1-spi4-default { + pins = "gpio37", "gpio38", "gpio117", "gpio118"; + function = "blsp_spi4"; + }; + + blsp2_spi0_default: blsp2-spi0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_spi5"; + }; + + blsp2_uart0_default: blsp2-uart0-default { + pins = "gpio26", "gpio27", "gpio28", "gpio29"; + function = "blsp_uart5"; + }; }; gcc: clock-controller@1800000 { @@ -335,6 +440,32 @@ status = "okay"; }; + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart0_default>; + status = "disabled"; + }; + + blsp1_uart1: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default>; + status = "disabled"; + }; + blsp1_uart2: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078b1000 0x200>; @@ -343,9 +474,237 @@ clock-names = "core", "iface"; dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; status = "okay"; }; + wifi: wifi@a000000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0xa000000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + + blsp1_uart3: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b2000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_default>; + status = "disabled"; + }; + + blsp1_i2c0: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi1: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi1_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi2_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi3_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_i2c4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi4: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_spi4_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x17000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,controlled-remotely = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp2_uart0: serial@7aef000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07aef000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart0_default>; + status = "disabled"; + }; + + blsp2_i2c0: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_i2c0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi0: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_spi0_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/src/arm64/qcom/sdm845-mtp.dts b/src/arm64/qcom/sdm845-mtp.dts index b3def0358177..af8c6a2445a2 100644 --- a/src/arm64/qcom/sdm845-mtp.dts +++ b/src/arm64/qcom/sdm845-mtp.dts @@ -7,6 +7,7 @@ /dts-v1/; +#include #include #include "sdm845.dtsi" @@ -346,7 +347,9 @@ &gcc { protected-clocks = , , - ; + , + , + ; }; &i2c10 { @@ -358,14 +361,36 @@ status = "okay"; }; -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; }; &uart9 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + &usb_1 { status = "okay"; }; @@ -427,6 +452,14 @@ vdda-pll-supply = <&vdda_usb2_ss_core>; }; +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { @@ -450,3 +483,48 @@ bias-pull-up; }; }; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_card_det_n: sd-card-det-n { + pinmux { + pins = "gpio126"; + function = "gpio"; + }; + + pinconf { + pins = "gpio126"; + bias-pull-up; + }; + }; +}; diff --git a/src/arm64/qcom/sdm845.dtsi b/src/arm64/qcom/sdm845.dtsi index c27cbd3bcb0a..5308f1671824 100644 --- a/src/arm64/qcom/sdm845.dtsi +++ b/src/arm64/qcom/sdm845.dtsi @@ -7,12 +7,17 @@ #include #include +#include +#include #include +#include #include #include #include +#include #include #include +#include / { interrupt-parent = <&intc>; @@ -88,6 +93,21 @@ reg = <0 0x86200000 0 0x2d00000>; no-map; }; + + wlan_msa_mem: memory@96700000 { + reg = <0 0x96700000 0 0x100000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x7800000>; + no-map; + }; + + mba_region: memory@96500000 { + reg = <0 0x96500000 0 0x200000>; + no-map; + }; }; cpus { @@ -99,6 +119,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -114,6 +136,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache"; @@ -126,6 +150,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache"; @@ -138,6 +164,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; @@ -150,6 +178,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache"; @@ -162,6 +192,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache"; @@ -174,6 +206,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache"; @@ -186,6 +220,8 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache"; @@ -222,6 +258,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-sdm845", "qcom,scm"; + }; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; @@ -328,14 +370,15 @@ }; soc: soc { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sdm845"; - reg = <0x100000 0x1f0000>; + reg = <0 0x00100000 0 0x1f0000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -343,7 +386,7 @@ qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x784000 0x8ff>; + reg = <0 0x00784000 0 0x8ff>; #address-cells = <1>; #size-cells = <1>; @@ -360,25 +403,25 @@ rng: rng@793000 { compatible = "qcom,prng-ee"; - reg = <0x00793000 0x1000>; + reg = <0 0x00793000 0 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; - reg = <0x8c0000 0x6000>; + reg = <0 0x008c0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c0: i2c@880000 { compatible = "qcom,geni-i2c"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -391,7 +434,7 @@ spi0: spi@880000 { compatible = "qcom,geni-spi"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -404,7 +447,7 @@ uart0: serial@880000 { compatible = "qcom,geni-uart"; - reg = <0x880000 0x4000>; + reg = <0 0x00880000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; pinctrl-names = "default"; @@ -415,7 +458,7 @@ i2c1: i2c@884000 { compatible = "qcom,geni-i2c"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -428,7 +471,7 @@ spi1: spi@884000 { compatible = "qcom,geni-spi"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -441,7 +484,7 @@ uart1: serial@884000 { compatible = "qcom,geni-uart"; - reg = <0x884000 0x4000>; + reg = <0 0x00884000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; pinctrl-names = "default"; @@ -452,7 +495,7 @@ i2c2: i2c@888000 { compatible = "qcom,geni-i2c"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -465,7 +508,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -478,7 +521,7 @@ uart2: serial@888000 { compatible = "qcom,geni-uart"; - reg = <0x888000 0x4000>; + reg = <0 0x00888000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; pinctrl-names = "default"; @@ -489,7 +532,7 @@ i2c3: i2c@88c000 { compatible = "qcom,geni-i2c"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -502,7 +545,7 @@ spi3: spi@88c000 { compatible = "qcom,geni-spi"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -515,7 +558,7 @@ uart3: serial@88c000 { compatible = "qcom,geni-uart"; - reg = <0x88c000 0x4000>; + reg = <0 0x0088c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; pinctrl-names = "default"; @@ -526,7 +569,7 @@ i2c4: i2c@890000 { compatible = "qcom,geni-i2c"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -539,7 +582,7 @@ spi4: spi@890000 { compatible = "qcom,geni-spi"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -552,7 +595,7 @@ uart4: serial@890000 { compatible = "qcom,geni-uart"; - reg = <0x890000 0x4000>; + reg = <0 0x00890000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; @@ -563,7 +606,7 @@ i2c5: i2c@894000 { compatible = "qcom,geni-i2c"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -576,7 +619,7 @@ spi5: spi@894000 { compatible = "qcom,geni-spi"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -589,7 +632,7 @@ uart5: serial@894000 { compatible = "qcom,geni-uart"; - reg = <0x894000 0x4000>; + reg = <0 0x00894000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; @@ -600,7 +643,7 @@ i2c6: i2c@898000 { compatible = "qcom,geni-i2c"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -613,7 +656,7 @@ spi6: spi@898000 { compatible = "qcom,geni-spi"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -626,7 +669,7 @@ uart6: serial@898000 { compatible = "qcom,geni-uart"; - reg = <0x898000 0x4000>; + reg = <0 0x00898000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; pinctrl-names = "default"; @@ -637,7 +680,7 @@ i2c7: i2c@89c000 { compatible = "qcom,geni-i2c"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -650,7 +693,7 @@ spi7: spi@89c000 { compatible = "qcom,geni-spi"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -663,7 +706,7 @@ uart7: serial@89c000 { compatible = "qcom,geni-uart"; - reg = <0x89c000 0x4000>; + reg = <0 0x0089c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; pinctrl-names = "default"; @@ -675,18 +718,18 @@ qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; - reg = <0xac0000 0x6000>; + reg = <0 0x00ac0000 0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; status = "disabled"; i2c8: i2c@a80000 { compatible = "qcom,geni-i2c"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -699,7 +742,7 @@ spi8: spi@a80000 { compatible = "qcom,geni-spi"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -712,7 +755,7 @@ uart8: serial@a80000 { compatible = "qcom,geni-uart"; - reg = <0xa80000 0x4000>; + reg = <0 0x00a80000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; pinctrl-names = "default"; @@ -723,7 +766,7 @@ i2c9: i2c@a84000 { compatible = "qcom,geni-i2c"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -736,7 +779,7 @@ spi9: spi@a84000 { compatible = "qcom,geni-spi"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -749,7 +792,7 @@ uart9: serial@a84000 { compatible = "qcom,geni-debug-uart"; - reg = <0xa84000 0x4000>; + reg = <0 0x00a84000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; pinctrl-names = "default"; @@ -760,7 +803,7 @@ i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -773,7 +816,7 @@ spi10: spi@a88000 { compatible = "qcom,geni-spi"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -786,7 +829,7 @@ uart10: serial@a88000 { compatible = "qcom,geni-uart"; - reg = <0xa88000 0x4000>; + reg = <0 0x00a88000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; pinctrl-names = "default"; @@ -797,7 +840,7 @@ i2c11: i2c@a8c000 { compatible = "qcom,geni-i2c"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -810,7 +853,7 @@ spi11: spi@a8c000 { compatible = "qcom,geni-spi"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -823,7 +866,7 @@ uart11: serial@a8c000 { compatible = "qcom,geni-uart"; - reg = <0xa8c000 0x4000>; + reg = <0 0x00a8c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; @@ -834,7 +877,7 @@ i2c12: i2c@a90000 { compatible = "qcom,geni-i2c"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -847,7 +890,7 @@ spi12: spi@a90000 { compatible = "qcom,geni-spi"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -860,7 +903,7 @@ uart12: serial@a90000 { compatible = "qcom,geni-uart"; - reg = <0xa90000 0x4000>; + reg = <0 0x00a90000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; pinctrl-names = "default"; @@ -871,7 +914,7 @@ i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -884,7 +927,7 @@ spi13: spi@a94000 { compatible = "qcom,geni-spi"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -897,7 +940,7 @@ uart13: serial@a94000 { compatible = "qcom,geni-uart"; - reg = <0xa94000 0x4000>; + reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; @@ -908,7 +951,7 @@ i2c14: i2c@a98000 { compatible = "qcom,geni-i2c"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -921,7 +964,7 @@ spi14: spi@a98000 { compatible = "qcom,geni-spi"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -934,7 +977,7 @@ uart14: serial@a98000 { compatible = "qcom,geni-uart"; - reg = <0xa98000 0x4000>; + reg = <0 0x00a98000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; pinctrl-names = "default"; @@ -945,7 +988,7 @@ i2c15: i2c@a9c000 { compatible = "qcom,geni-i2c"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -958,7 +1001,7 @@ spi15: spi@a9c000 { compatible = "qcom,geni-spi"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -971,7 +1014,7 @@ uart15: serial@a9c000 { compatible = "qcom,geni-uart"; - reg = <0xa9c000 0x4000>; + reg = <0 0x00a9c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; pinctrl-names = "default"; @@ -981,19 +1024,121 @@ }; }; + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sdm845-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x100 0xf>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sdm845-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x1f40000 0x40000>; + reg = <0 0x01f40000 0 0x40000>; }; tlmm: pinctrl@3400000 { compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; + reg = <0 0x03400000 0 0xc00000>; interrupts = ; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 150>; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio95"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio90"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio89"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio91", "gpio92"; + function = "qspi_data"; + }; + }; + + qspi_data12: qspi-data12 { + pinmux-data { + pins = "gpio93", "gpio94"; + function = "qspi_data"; + }; + }; qup_i2c0_default: qup-i2c0-default { pinmux { @@ -1348,9 +1493,47 @@ }; }; + gpucc: clock-controller@5090000 { + compatible = "qcom,sdm845-gpucc"; + reg = <0 0x05090000 0 0x9000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>; + clock-names = "iface", "core"; + iommus = <&apps_smmu 0xa0 0xf>; + + status = "disabled"; + }; + + qspi: spi@88df000 { + compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; + reg = <0 0x088df000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + usb_1_hsphy: phy@88e2000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e2000 0x400>; + reg = <0 0x088e2000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1365,7 +1548,7 @@ usb_2_hsphy: phy@88e3000 { compatible = "qcom,sdm845-qusb2-phy"; - reg = <0x88e3000 0x400>; + reg = <0 0x088e3000 0 0x400>; status = "disabled"; #phy-cells = <0>; @@ -1380,13 +1563,13 @@ usb_1_qmpphy: phy@88e9000 { compatible = "qcom,sdm845-qmp-usb3-phy"; - reg = <0x88e9000 0x18c>, - <0x88e8000 0x10>; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, @@ -1399,11 +1582,13 @@ <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: lane@88e9200 { - reg = <0x88e9200 0x128>, - <0x88e9400 0x200>, - <0x88e9c00 0x218>, - <0x88e9a00 0x100>; + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1413,11 +1598,11 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0x88eb000 0x18c>; + reg = <0 0x088eb000 0 0x18c>; status = "disabled"; #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, @@ -1431,10 +1616,10 @@ reset-names = "phy", "common"; usb_2_ssphy: lane@88eb200 { - reg = <0x88eb200 0x128>, - <0x88eb400 0x1fc>, - <0x88eb800 0x218>, - <0x88e9600 0x70>; + reg = <0 0x088eb200 0 0x128>, + <0 0x088eb400 0 0x1fc>, + <0 0x088eb800 0 0x218>, + <0 0x088eb600 0 0x70>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1444,11 +1629,12 @@ usb_1: usb@a6f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa6f8800 0x400>; + reg = <0 0x0a6f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; + dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -1475,8 +1661,9 @@ usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; - reg = <0xa600000 0xcd00>; + reg = <0 0x0a600000 0 0xcd00>; interrupts = ; + iommus = <&apps_smmu 0x740 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; @@ -1486,11 +1673,12 @@ usb_2: usb@a8f8800 { compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; - reg = <0xa8f8800 0x400>; + reg = <0 0x0a8f8800 0 0x400>; status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; + dma-ranges; clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, <&gcc GCC_USB30_SEC_MASTER_CLK>, @@ -1517,8 +1705,9 @@ usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; - reg = <0xa800000 0xcd00>; + reg = <0 0x0a800000 0 0xcd00>; interrupts = ; + iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; phys = <&usb_2_hsphy>, <&usb_2_ssphy>; @@ -1526,43 +1715,260 @@ }; }; + videocc: clock-controller@ab00000 { + compatible = "qcom,sdm845-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + mdss: mdss@ae00000 { + compatible = "qcom,sdm845-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; + assigned-clock-rates = <300000000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,sdm845-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <300000000>, + <19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface"; + + status = "disabled"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; - reg = <0xaf00000 0x10000>; + reg = <0 0x0af00000 0 0x10000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + tsens0: thermal-sensor@c263000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, /* TM */ - <0xc222000 0x1ff>; /* SROT */ + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@c265000 { compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc265000 0x1ff>, /* TM */ - <0xc223000 0x1ff>; /* SROT */ + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; aoss_reset: reset-controller@c2a0000 { compatible = "qcom,sdm845-aoss-cc"; - reg = <0xc2a0000 0x31000>; + reg = <0 0x0c2a0000 0 0x31000>; #reset-cells = <1>; }; spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0xc440000 0x1100>, - <0xc600000 0x2000000>, - <0xe600000 0x100000>, - <0xe700000 0xa0000>, - <0xc40a000 0x26000>; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; @@ -1575,18 +1981,98 @@ cell-index = <0>; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + lpasscc: clock-controller@17014000 { + compatible = "qcom,sdm845-lpasscc"; + reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>; + reg-names = "cc", "qdsp6ss"; + #clock-cells = <1>; + status = "disabled"; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; - reg = <0x17990000 0x1000>; + reg = <0 0x17990000 0 0x1000>; #mbox-cells = <1>; }; apps_rsc: rsc@179c0000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; - reg = <0x179c0000 0x10000>, - <0x179d0000 0x10000>, - <0x179e0000 0x10000>; + reg = <0 0x179c0000 0 0x10000>, + <0 0x179d0000 0 0x10000>, + <0 0x179e0000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; interrupts = , , @@ -1602,85 +2088,175 @@ compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdm845-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <48>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <64>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <128>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <192>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <256>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <320>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <336>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <416>; + }; + }; + }; + + rsc_hlos: interconnect { + compatible = "qcom,sdm845-rsc-hlos"; + #interconnect-cells = <1>; + }; }; intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; - reg = <0x17a00000 0x10000>, /* GICD */ - <0x17a60000 0x100000>; /* GICR * 8 */ + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = ; gic-its@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x17a40000 0x20000>; + reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; timer@17c90000 { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; ranges; compatible = "arm,armv7-timer-mem"; - reg = <0x17c90000 0x1000>; + reg = <0 0x17c90000 0 0x1000>; frame@17ca0000 { frame-number = <0>; interrupts = , ; - reg = <0x17ca0000 0x1000>, - <0x17cb0000 0x1000>; + reg = <0 0x17ca0000 0 0x1000>, + <0 0x17cb0000 0 0x1000>; }; frame@17cc0000 { frame-number = <1>; interrupts = ; - reg = <0x17cc0000 0x1000>; + reg = <0 0x17cc0000 0 0x1000>; status = "disabled"; }; frame@17cd0000 { frame-number = <2>; interrupts = ; - reg = <0x17cd0000 0x1000>; + reg = <0 0x17cd0000 0 0x1000>; status = "disabled"; }; frame@17ce0000 { frame-number = <3>; interrupts = ; - reg = <0x17ce0000 0x1000>; + reg = <0 0x17ce0000 0 0x1000>; status = "disabled"; }; frame@17cf0000 { frame-number = <4>; interrupts = ; - reg = <0x17cf0000 0x1000>; + reg = <0 0x17cf0000 0 0x1000>; status = "disabled"; }; frame@17d00000 { frame-number = <5>; interrupts = ; - reg = <0x17d00000 0x1000>; + reg = <0 0x17d00000 0 0x1000>; status = "disabled"; }; frame@17d10000 { frame-number = <6>; interrupts = ; - reg = <0x17d10000 0x1000>; + reg = <0 0x17d10000 0 0x1000>; status = "disabled"; }; }; + + cpufreq_hw: cpufreq@17d43000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clock-names = "cxo_ref_clk_pin"; + clocks = <&rpmhcc RPMH_RF_CLK2>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x0040 0x1>; + }; }; thermal-zones { @@ -1691,18 +2267,41 @@ thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { - temperature = <75000>; + cpu0_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal { @@ -1712,18 +2311,41 @@ thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { - temperature = <75000>; + cpu1_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal { @@ -1733,18 +2355,41 @@ thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { - temperature = <75000>; + cpu2_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal { @@ -1754,18 +2399,41 @@ thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { - temperature = <75000>; + cpu3_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu4-thermal { @@ -1775,18 +2443,41 @@ thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { - temperature = <75000>; + cpu4_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu5-thermal { @@ -1796,18 +2487,41 @@ thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { - temperature = <75000>; + cpu5_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu6-thermal { @@ -1817,18 +2531,41 @@ thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { - temperature = <75000>; + cpu6_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu7-thermal { @@ -1838,18 +2575,41 @@ thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { - temperature = <75000>; + cpu7_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/src/arm64/realtek/rtd1295.dtsi b/src/arm64/realtek/rtd1295.dtsi index 8d9ac05d17dc..41d7858da826 100644 --- a/src/arm64/realtek/rtd1295.dtsi +++ b/src/arm64/realtek/rtd1295.dtsi @@ -17,28 +17,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; next-level-cache = <&l2>; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; next-level-cache = <&l2>; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; next-level-cache = <&l2>; }; diff --git a/src/arm64/renesas/cat875.dtsi b/src/arm64/renesas/cat875.dtsi new file mode 100644 index 000000000000..14db66755a89 --- /dev/null +++ b/src/arm64/renesas/cat875.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + model = "Silicon Linux sub board for CAT874 (CAT875)"; + + aliases { + ethernet0 = &avb; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy-mode = "rgmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + }; +}; + +&pciec0 { + status = "okay"; +}; + +&pfc { + avb_pins: avb { + mux { + groups = "avb_mii"; + function = "avb"; + }; + }; +}; diff --git a/src/arm64/renesas/r8a774a1.dtsi b/src/arm64/renesas/r8a774a1.dtsi index 719ed9d9067d..ef3cff2dd1b6 100644 --- a/src/arm64/renesas/r8a774a1.dtsi +++ b/src/arm64/renesas/r8a774a1.dtsi @@ -61,7 +61,7 @@ #size-cells = <0>; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; @@ -71,7 +71,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA57_CPU1>; @@ -81,7 +81,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; @@ -91,7 +91,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU1>; @@ -101,7 +101,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU2>; @@ -111,7 +111,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A774A1_PD_CA53_CPU3>; @@ -599,7 +599,7 @@ hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a774a1", "renesas,rcar-gen3-usbhs"; - reg = <0 0xe6590000 0 0x100>; + reg = <0 0xe6590000 0 0x200>; interrupts = ; clocks = <&cpg CPG_MOD 704>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, diff --git a/src/arm64/renesas/r8a774c0-cat874.dts b/src/arm64/renesas/r8a774c0-cat874.dts new file mode 100644 index 000000000000..96ee0d2c6357 --- /dev/null +++ b/src/arm64/renesas/r8a774c0-cat874.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774c0.dtsi" +#include + +/ { + model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; + compatible = "si-linux,cat874", "renesas,r8a774c0"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; +}; + +&pfc { + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; diff --git a/src/arm64/renesas/r8a774c0-ek874.dts b/src/arm64/renesas/r8a774c0-ek874.dts new file mode 100644 index 000000000000..e7b6619ab224 --- /dev/null +++ b/src/arm64/renesas/r8a774c0-ek874.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874) + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774c0-cat874.dts" +#include "cat875.dtsi" + +/ { + model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)"; + compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0"; +}; diff --git a/src/arm64/renesas/r8a774c0.dtsi b/src/arm64/renesas/r8a774c0.dtsi new file mode 100644 index 000000000000..1ea684af99c4 --- /dev/null +++ b/src/arm64/renesas/r8a774c0.dtsi @@ -0,0 +1,1910 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2E (R8A774C0) SoC + * + * Copyright (C) 2018-2019 Renesas Electronics Corp. + */ + +#include +#include +#include + +/ { + compatible = "renesas,r8a774c0"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster1_opp: opp_table10 { + compatible = "operating-points-v2"; + opp-shared; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + }; + + a53_1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <1>; + device_type = "cpu"; + power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A774C0_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + }; + + L2_CA53: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774C0_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774c0-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 11>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 20>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774c0", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = ; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774c0"; + reg = <0 0xe6060000 0 0x508>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774c0-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774c0-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774c0-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774c0-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774c0-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a774c0"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = ; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774c0", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c7: i2c@e6690000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774c0", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6690000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 1003>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 1003>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774c0"; + reg = <0 0xe60b0000 0 0x15>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774c0", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774c0", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = ; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774c0-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774c0-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = , + ; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774C0_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774c0"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774c0", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774c0", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 916>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774c0", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>, <&can_clk>; + clock-names = "clkp1", "can_clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774c0", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774C0_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774c0", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774c0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774c0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin5>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774c0", + "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774C0_CLK_ZA2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma0 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma0 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = ; + dmas = <&audma0 0x85>, <&audma0 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = ; + dmas = <&audma0 0x87>, <&audma0 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = ; + dmas = <&audma0 0x89>, <&audma0 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = ; + dmas = <&audma0 0x8b>, <&audma0 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = ; + dmas = <&audma0 0x8d>, <&audma0 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = ; + dmas = <&audma0 0x8f>, <&audma0 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = ; + dmas = <&audma0 0x91>, <&audma0 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = ; + dmas = <&audma0 0x93>, <&audma0 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = ; + dmas = <&audma0 0x95>, <&audma0 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = ; + dmas = <&audma0 0x97>, <&audma0 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = ; + dmas = <&audma0 0x01>, <&audma0 0x02>, + <&audma0 0x15>, <&audma0 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = ; + dmas = <&audma0 0x03>, <&audma0 0x04>, + <&audma0 0x49>, <&audma0 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = ; + dmas = <&audma0 0x05>, <&audma0 0x06>, + <&audma0 0x63>, <&audma0 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = ; + dmas = <&audma0 0x07>, <&audma0 0x08>, + <&audma0 0x6f>, <&audma0 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = ; + dmas = <&audma0 0x09>, <&audma0 0x0a>, + <&audma0 0x71>, <&audma0 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = ; + dmas = <&audma0 0x0b>, <&audma0 0x0c>, + <&audma0 0x73>, <&audma0 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = ; + dmas = <&audma0 0x0d>, <&audma0 0x0e>, + <&audma0 0x75>, <&audma0 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = ; + dmas = <&audma0 0x0f>, <&audma0 0x10>, + <&audma0 0x79>, <&audma0 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = ; + dmas = <&audma0 0x11>, <&audma0 0x12>, + <&audma0 0x7b>, <&audma0 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = ; + dmas = <&audma0 0x13>, <&audma0 0x14>, + <&audma0 0x7d>, <&audma0 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774c0", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774c0", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774c0-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774c0", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774c0", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = ; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774c0", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = , + , + ; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + vspb0: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = ; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 626>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = ; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 631>; + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = ; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = ; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774c0-csi2", + "renesas,rcar-gen3-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = ; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin4: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin5csi40>; + }; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774c0"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + remote-endpoint = <&lvds1_in>; + }; + }; + }; + }; + + lvds0: lvds-encoder@feb90000 { + compatible = "renesas,r8a774c0-lvds"; + reg = <0 0xfeb90000 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + lvds1: lvds-encoder@feb90100 { + compatible = "renesas,r8a774c0-lvds"; + reg = <0 0xfeb90100 0 0x20>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 726>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds1_in: endpoint { + remote-endpoint = <&du_out_lvds1>; + }; + }; + + port@1 { + reg = <1>; + lvds1_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/src/arm64/renesas/r8a7795.dtsi b/src/arm64/renesas/r8a7795.dtsi index af9605d5db27..abeac3059383 100644 --- a/src/arm64/renesas/r8a7795.dtsi +++ b/src/arm64/renesas/r8a7795.dtsi @@ -149,7 +149,7 @@ }; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU0>; @@ -162,7 +162,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU1>; @@ -175,7 +175,7 @@ }; a57_2: cpu@2 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x2>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU2>; @@ -188,7 +188,7 @@ }; a57_3: cpu@3 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x3>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA57_CPU3>; @@ -201,7 +201,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU0>; @@ -213,7 +213,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU1>; @@ -225,7 +225,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU2>; @@ -237,7 +237,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A7795_PD_CA53_CPU3>; @@ -2174,53 +2174,53 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = ; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = ; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = ; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = ; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = ; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = ; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = ; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = ; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = ; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = ; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; }; diff --git a/src/arm64/renesas/r8a7796-salvator-xs.dts b/src/arm64/renesas/r8a7796-salvator-xs.dts index 8860be65342e..31f12059355e 100644 --- a/src/arm64/renesas/r8a7796-salvator-xs.dts +++ b/src/arm64/renesas/r8a7796-salvator-xs.dts @@ -29,11 +29,10 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 727>, <&versaclock6 1>, <&x21_clk>, <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "lvds.0", + clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1", "dclkin.2"; }; diff --git a/src/arm64/renesas/r8a7796.dtsi b/src/arm64/renesas/r8a7796.dtsi index 0648d12778ed..cdf784899cf8 100644 --- a/src/arm64/renesas/r8a7796.dtsi +++ b/src/arm64/renesas/r8a7796.dtsi @@ -154,7 +154,7 @@ }; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA57_CPU0>; @@ -167,7 +167,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA57_CPU1>; @@ -180,7 +180,7 @@ }; a53_0: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU0>; @@ -192,7 +192,7 @@ }; a53_1: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU1>; @@ -204,7 +204,7 @@ }; a53_2: cpu@102 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x102>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU2>; @@ -216,7 +216,7 @@ }; a53_3: cpu@103 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x103>; device_type = "cpu"; power-domains = <&sysc R8A7796_PD_CA53_CPU3>; @@ -2113,53 +2113,53 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = ; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = ; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = ; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = ; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = ; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = ; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = ; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = ; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = ; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = ; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; diff --git a/src/arm64/renesas/r8a77965.dtsi b/src/arm64/renesas/r8a77965.dtsi index 4b3730f640ef..9763d108e183 100644 --- a/src/arm64/renesas/r8a77965.dtsi +++ b/src/arm64/renesas/r8a77965.dtsi @@ -105,7 +105,7 @@ #size-cells = <0>; a57_0: cpu@0 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A77965_PD_CA57_CPU0>; @@ -116,7 +116,7 @@ }; a57_1: cpu@1 { - compatible = "arm,cortex-a57", "arm,armv8"; + compatible = "arm,cortex-a57"; reg = <0x1>; device_type = "cpu"; power-domains = <&sysc R8A77965_PD_CA57_CPU1>; diff --git a/src/arm64/renesas/r8a77970-v3msk.dts b/src/arm64/renesas/r8a77970-v3msk.dts index 0dbcb4cccc18..15cc9fed2e16 100644 --- a/src/arm64/renesas/r8a77970-v3msk.dts +++ b/src/arm64/renesas/r8a77970-v3msk.dts @@ -108,6 +108,8 @@ phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/src/arm64/renesas/r8a77970.dtsi b/src/arm64/renesas/r8a77970.dtsi index 563428d1cdc2..5b6164d4b8e3 100644 --- a/src/arm64/renesas/r8a77970.dtsi +++ b/src/arm64/renesas/r8a77970.dtsi @@ -37,7 +37,7 @@ a53_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; power-domains = <&sysc R8A77970_PD_CA53_CPU0>; @@ -47,7 +47,7 @@ a53_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>; power-domains = <&sysc R8A77970_PD_CA53_CPU1>; diff --git a/src/arm64/renesas/r8a77980.dtsi b/src/arm64/renesas/r8a77980.dtsi index 5bd9b2547c36..4081622d548a 100644 --- a/src/arm64/renesas/r8a77980.dtsi +++ b/src/arm64/renesas/r8a77980.dtsi @@ -38,7 +38,7 @@ a53_0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU0>; @@ -48,7 +48,7 @@ a53_1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU1>; @@ -58,7 +58,7 @@ a53_2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <2>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU2>; @@ -68,7 +68,7 @@ a53_3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <3>; clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>; power-domains = <&sysc R8A77980_PD_CA53_CPU3>; diff --git a/src/arm64/renesas/r8a77990-ebisu.dts b/src/arm64/renesas/r8a77990-ebisu.dts index 62bdddcbbae7..144c0820cf60 100644 --- a/src/arm64/renesas/r8a77990-ebisu.dts +++ b/src/arm64/renesas/r8a77990-ebisu.dts @@ -39,6 +39,16 @@ clock-frequency = <11289600>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 50000>; + + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; + + power-supply = <®_12p0v>; + }; + cvbs-in { compatible = "composite-video-connector"; label = "CVBS IN"; @@ -159,16 +169,13 @@ }; rsnd_ak4613: sound { - compatible = "simple-scu-audio-card"; + compatible = "simple-audio-card"; simple-audio-card,name = "rsnd-ak4613"; simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - simple-audio-card,prefix = "ak4613"; - simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4613 Capture"; sndcpu: simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; @@ -184,6 +191,15 @@ clock-frequency = <24576000>; }; + reg_12p0v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + x13_clk: x13 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -248,7 +264,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -680,6 +695,7 @@ vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; mmc-hs200-1_8v; + mmc-hs400-1_8v; bus-width = <8>; non-removable; status = "okay"; diff --git a/src/arm64/renesas/r8a77990.dtsi b/src/arm64/renesas/r8a77990.dtsi index b2f606e286ce..d2ad665fe2d9 100644 --- a/src/arm64/renesas/r8a77990.dtsi +++ b/src/arm64/renesas/r8a77990.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for the R-Car E3 (R8A77990) SoC * - * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018-2019 Renesas Electronics Corp. */ #include @@ -55,26 +55,51 @@ clock-frequency = <0>; }; + cluster1_opp: opp_table10 { + compatible = "operating-points-v2"; + opp-shared; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; device_type = "cpu"; power-domains = <&sysc R8A77990_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA53: cache-controller-0 { @@ -240,6 +265,74 @@ resets = <&cpg 906>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77990"; + reg = <0 0xe6060000 0 0x508>; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77990"; + reg = <0 0xe60b0000 0 0x15>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77990-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77990-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77990-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + thermal: thermal@e6190000 { + compatible = "renesas,thermal-r8a77990"; + reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77990", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = ; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -369,74 +462,6 @@ status = "disabled"; }; - pfc: pin-controller@e6060000 { - compatible = "renesas,pfc-r8a77990"; - reg = <0 0xe6060000 0 0x508>; - }; - - i2c_dvfs: i2c@e60b0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "renesas,iic-r8a77990"; - reg = <0 0xe60b0000 0 0x15>; - interrupts = ; - clocks = <&cpg CPG_MOD 926>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 926>; - dmas = <&dmac0 0x11>, <&dmac0 0x10>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - cpg: clock-controller@e6150000 { - compatible = "renesas,r8a77990-cpg-mssr"; - reg = <0 0xe6150000 0 0x1000>; - clocks = <&extal_clk>; - clock-names = "extal"; - #clock-cells = <2>; - #power-domain-cells = <0>; - #reset-cells = <1>; - }; - - rst: reset-controller@e6160000 { - compatible = "renesas,r8a77990-rst"; - reg = <0 0xe6160000 0 0x0200>; - }; - - sysc: system-controller@e6180000 { - compatible = "renesas,r8a77990-sysc"; - reg = <0 0xe6180000 0 0x0400>; - #power-domain-cells = <1>; - }; - - thermal: thermal@e6190000 { - compatible = "renesas,thermal-r8a77990"; - reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>; - interrupts = , - , - ; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; - }; - - intc_ex: interrupt-controller@e61c0000 { - compatible = "renesas,intc-ex-r8a77990", "renesas,irqc"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0 0xe61c0000 0 0x200>; - interrupts = ; - clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 407>; - }; - hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77990", "renesas,rcar-gen3-hscif", @@ -993,7 +1018,9 @@ <&cpg CPG_CORE R8A77990_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -1040,9 +1067,8 @@ <&cpg CPG_CORE R8A77990_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, - <&dmac2 0x5b>, <&dmac2 0x5a>; - dma-names = "tx", "rx", "tx", "rx"; + dmas = <&dmac0 0x5b>, <&dmac0 0x5a>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; @@ -1526,6 +1552,33 @@ resets = <&cpg 408>; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a77990", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; + interrupts = , + , + ; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + vspb0: vsp@fe960000 { compatible = "renesas,vsp2"; reg = <0 0xfe960000 0 0x8000>; @@ -1724,33 +1777,6 @@ }; }; - pciec0: pcie@fe000000 { - compatible = "renesas,pcie-r8a77990", - "renesas,pcie-rcar-gen3"; - reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - /* Map all possible DDR as inbound ranges */ - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; - interrupts = , - , - ; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; - resets = <&cpg 319>; - status = "disabled"; - }; - prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; diff --git a/src/arm64/renesas/r8a77995-draak.dts b/src/arm64/renesas/r8a77995-draak.dts index 89df9bc844c0..db2bed1751b8 100644 --- a/src/arm64/renesas/r8a77995-draak.dts +++ b/src/arm64/renesas/r8a77995-draak.dts @@ -28,8 +28,8 @@ compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; - brightness-levels = <256 128 64 16 8 4 0>; - default-brightness-level = <6>; + brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; + default-brightness-level = <10>; power-supply = <®_12p0v>; enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; diff --git a/src/arm64/renesas/r8a77995.dtsi b/src/arm64/renesas/r8a77995.dtsi index 8530d9fc1371..5bf3af246e14 100644 --- a/src/arm64/renesas/r8a77995.dtsi +++ b/src/arm64/renesas/r8a77995.dtsi @@ -27,7 +27,7 @@ #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0>; device_type = "cpu"; power-domains = <&sysc R8A77995_PD_CA53_CPU0>; diff --git a/src/arm64/renesas/salvator-common.dtsi b/src/arm64/renesas/salvator-common.dtsi index f66d990b92f1..a225c2457274 100644 --- a/src/arm64/renesas/salvator-common.dtsi +++ b/src/arm64/renesas/salvator-common.dtsi @@ -764,6 +764,7 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + mmc-hs400-1_8v; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; diff --git a/src/arm64/renesas/ulcb-kf.dtsi b/src/arm64/renesas/ulcb-kf.dtsi index 1b316d79df88..7a09576b3112 100644 --- a/src/arm64/renesas/ulcb-kf.dtsi +++ b/src/arm64/renesas/ulcb-kf.dtsi @@ -6,11 +6,38 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ +/* + * SSI-PCM3168A + * aplay -D plughw:0,2 xxx.wav + * arecord -D plughw:0,3 xxx.wav + */ + / { aliases { serial1 = &hscif0; serial2 = &scif1; }; + + clksndsel: clksndsel { + #clock-cells = <0>; + compatible = "gpio-mux-clock"; + clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */ + select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>; + }; + + snd_3p3v: regulator-snd_3p3v { + compatible = "regulator-fixed"; + regulator-name = "snd-3.3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + snd_vcc5v: regulator-snd_vcc5v { + compatible = "regulator-fixed"; + regulator-name = "snd-vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; }; &can0 { @@ -44,6 +71,7 @@ }; &i2c2 { + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; reg = <0x74>; @@ -53,6 +81,13 @@ interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + audio_out_off { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */ + output-high; + line-name = "Audio_Out_OFF"; + }; + hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -80,8 +115,16 @@ output-high; line-name = "OTG EXTLPn"; }; + + snd_rst { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */ + output-high; + line-name = "SND_RST"; + }; }; + /* U5 */ gpio_exp_75: gpio@75 { compatible = "ti,tca9539"; reg = <0x75>; @@ -98,6 +141,48 @@ #size-cells = <0>; reg = <0x71>; reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; + }; + }; }; }; @@ -173,6 +258,11 @@ groups = "usb0"; function = "usb0"; }; + + sound_pcm_pins: sound-pcm { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; }; &scif1 { @@ -193,3 +283,51 @@ &xhci0 { status = "okay"; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2 /* pcm3168a playback */ + &rsnd_port3 /* pcm3168a capture */ + >; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins + &sound_clk_pins + &sound_pcm_pins>; + + ports { + /* rsnd_port0/1 are on salvator-common */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_play>; + frame-master = <&rsnd_for_pcm3168a_play>; + dai-tdm-slot-num = <8>; + + playback = <&ssi3>; + }; + }; + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_capture>; + frame-master = <&rsnd_for_pcm3168a_capture>; + dai-tdm-slot-num = <6>; + + capture = <&ssi4>; + }; + }; + }; +}; + +&ssi4 { + shared-pin; +}; diff --git a/src/arm64/renesas/ulcb.dtsi b/src/arm64/renesas/ulcb.dtsi index de694fdae067..e70e1bac2be4 100644 --- a/src/arm64/renesas/ulcb.dtsi +++ b/src/arm64/renesas/ulcb.dtsi @@ -6,6 +6,14 @@ * Copyright (C) 2016 Cogent Embedded, Inc. */ +/* + * SSI-AK4613 + * aplay -D plughw:0,0 xxx.wav + * arecord -D plughw:0,0 xxx.wav + * SSI-HDMI + * aplay -D plughw:0,1 xxx.wav + */ + #include #include @@ -83,20 +91,13 @@ regulator-always-on; }; - rsnd_ak4613: sound { - compatible = "simple-audio-card"; + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + >; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -182,6 +183,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_for_hdmi>; + }; + }; }; }; @@ -211,6 +218,12 @@ asahi-kasei,out4-single-end; asahi-kasei,out5-single-end; asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_for_ak4613>; + }; + }; }; cs2000: clk-multiplier@4f { @@ -384,10 +397,33 @@ <&audio_clk_c>, <&cpg CPG_CORE CPG_AUDIO_CLK_I>; - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_for_ak4613: endpoint { + remote-endpoint = <&ak4613_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_for_ak4613>; + frame-master = <&rsnd_for_ak4613>; + + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; + rsnd_port1: port@1 { + reg = <1>; + rsnd_for_hdmi: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_hdmi>; + frame-master = <&rsnd_for_hdmi>; + + playback = <&ssi2>; + }; }; }; }; @@ -427,6 +463,7 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + mmc-hs400-1_8v; non-removable; status = "okay"; }; diff --git a/src/arm64/rockchip/px30.dtsi b/src/arm64/rockchip/px30.dtsi index 9aa8d5ef9e45..eb992d60e6ba 100644 --- a/src/arm64/rockchip/px30.dtsi +++ b/src/arm64/rockchip/px30.dtsi @@ -40,7 +40,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -52,7 +52,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -64,7 +64,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLK>; @@ -76,7 +76,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a35", "arm,armv8"; + compatible = "arm,cortex-a35"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLK>; diff --git a/src/arm64/rockchip/rk3328-roc-cc.dts b/src/arm64/rockchip/rk3328-roc-cc.dts index 99d0d9912950..0e34354b2092 100644 --- a/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/src/arm64/rockchip/rk3328-roc-cc.dts @@ -104,11 +104,12 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; + snps,force_thresh_dma_mode; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x25>; - rx_delay = <0x11>; + tx_delay = <0x24>; + rx_delay = <0x18>; status = "okay"; }; diff --git a/src/arm64/rockchip/rk3328-rock64.dts b/src/arm64/rockchip/rk3328-rock64.dts index 040b36ef0dd2..79b4d1d4b5d6 100644 --- a/src/arm64/rockchip/rk3328-rock64.dts +++ b/src/arm64/rockchip/rk3328-rock64.dts @@ -46,8 +46,7 @@ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host1_5v"; @@ -68,7 +67,8 @@ sound { compatible = "audio-graph-card"; label = "rockchip,rk3328"; - dais = <&spdif_p0>; + dais = <&i2s1_p0 + &spdif_p0>; }; spdif-dit { @@ -83,6 +83,16 @@ }; }; +&codec { + status = "okay"; + + port@0 { + codec_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; +}; + &cpu0 { cpu-supply = <&vdd_arm>; }; @@ -245,6 +255,18 @@ }; }; +&i2s1 { + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&codec_p0_0>; + }; + }; +}; + &io_domains { status = "okay"; @@ -292,7 +314,6 @@ &spdif { pinctrl-0 = <&spdifm0_tx>; status = "okay"; - #sound-dai-cells = <0>; spdif_p0: port { spdif_p0_0: endpoint { diff --git a/src/arm64/rockchip/rk3328.dtsi b/src/arm64/rockchip/rk3328.dtsi index ecd7f19c3542..dabef1a21649 100644 --- a/src/arm64/rockchip/rk3328.dtsi +++ b/src/arm64/rockchip/rk3328.dtsi @@ -37,7 +37,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -49,7 +49,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -61,7 +61,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -73,7 +73,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; @@ -184,6 +184,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 11>, <&dmac 12>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -195,6 +196,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 14>, <&dmac 15>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -206,6 +208,7 @@ clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac 0>, <&dmac 1>; dma-names = "tx", "rx"; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -219,6 +222,7 @@ dma-names = "tx"; pinctrl-names = "default"; pinctrl-0 = <&spdifm2_tx>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -672,6 +676,16 @@ }; }; + codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0x0 0xff410000 0x0 0x1000>; + clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>; + clock-names = "pclk", "mclk"; + rockchip,grf = <&grf>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + hdmiphy: phy@ff430000 { compatible = "rockchip,rk3328-hdmi-phy"; reg = <0x0 0xff430000 0x0 0x10000>; @@ -1431,11 +1445,11 @@ sdmmc0 { sdmmc0_clk: sdmmc0-clk { - rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_4ma>; + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_8ma>; }; sdmmc0_cmd: sdmmc0-cmd { - rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_4ma>; + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_8ma>; }; sdmmc0_dectn: sdmmc0-dectn { @@ -1447,14 +1461,14 @@ }; sdmmc0_bus1: sdmmc0-bus1 { - rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>; }; sdmmc0_bus4: sdmmc0-bus4 { - rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>, - <1 RK_PA1 1 &pcfg_pull_up_4ma>, - <1 RK_PA2 1 &pcfg_pull_up_4ma>, - <1 RK_PA3 1 &pcfg_pull_up_4ma>; + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>, + <1 RK_PA1 1 &pcfg_pull_up_8ma>, + <1 RK_PA2 1 &pcfg_pull_up_8ma>, + <1 RK_PA3 1 &pcfg_pull_up_8ma>; }; sdmmc0_gpio: sdmmc0-gpio { @@ -1628,50 +1642,50 @@ rgmiim1_pins: rgmiim1-pins { rockchip,pins = /* mac_txclk */ - <1 RK_PB4 2 &pcfg_pull_none_12ma>, + <1 RK_PB4 2 &pcfg_pull_none_8ma>, /* mac_rxclk */ - <1 RK_PB5 2 &pcfg_pull_none_2ma>, + <1 RK_PB5 2 &pcfg_pull_none_4ma>, /* mac_mdio */ - <1 RK_PC3 2 &pcfg_pull_none_2ma>, + <1 RK_PC3 2 &pcfg_pull_none_4ma>, /* mac_txen */ - <1 RK_PD1 2 &pcfg_pull_none_12ma>, + <1 RK_PD1 2 &pcfg_pull_none_8ma>, /* mac_clk */ - <1 RK_PC5 2 &pcfg_pull_none_2ma>, + <1 RK_PC5 2 &pcfg_pull_none_4ma>, /* mac_rxdv */ - <1 RK_PC6 2 &pcfg_pull_none_2ma>, + <1 RK_PC6 2 &pcfg_pull_none_4ma>, /* mac_mdc */ - <1 RK_PC7 2 &pcfg_pull_none_2ma>, + <1 RK_PC7 2 &pcfg_pull_none_4ma>, /* mac_rxd1 */ - <1 RK_PB2 2 &pcfg_pull_none_2ma>, + <1 RK_PB2 2 &pcfg_pull_none_4ma>, /* mac_rxd0 */ - <1 RK_PB3 2 &pcfg_pull_none_2ma>, + <1 RK_PB3 2 &pcfg_pull_none_4ma>, /* mac_txd1 */ - <1 RK_PB0 2 &pcfg_pull_none_12ma>, + <1 RK_PB0 2 &pcfg_pull_none_8ma>, /* mac_txd0 */ - <1 RK_PB1 2 &pcfg_pull_none_12ma>, + <1 RK_PB1 2 &pcfg_pull_none_8ma>, /* mac_rxd3 */ - <1 RK_PB6 2 &pcfg_pull_none_2ma>, + <1 RK_PB6 2 &pcfg_pull_none_4ma>, /* mac_rxd2 */ - <1 RK_PB7 2 &pcfg_pull_none_2ma>, + <1 RK_PB7 2 &pcfg_pull_none_4ma>, /* mac_txd3 */ - <1 RK_PC0 2 &pcfg_pull_none_12ma>, + <1 RK_PC0 2 &pcfg_pull_none_8ma>, /* mac_txd2 */ - <1 RK_PC1 2 &pcfg_pull_none_12ma>, + <1 RK_PC1 2 &pcfg_pull_none_8ma>, /* mac_txclk */ - <0 RK_PB0 1 &pcfg_pull_none>, + <0 RK_PB0 1 &pcfg_pull_none_8ma>, /* mac_txen */ - <0 RK_PB4 1 &pcfg_pull_none>, + <0 RK_PB4 1 &pcfg_pull_none_8ma>, /* mac_clk */ - <0 RK_PD0 1 &pcfg_pull_none>, + <0 RK_PD0 1 &pcfg_pull_none_4ma>, /* mac_txd1 */ - <0 RK_PC0 1 &pcfg_pull_none>, + <0 RK_PC0 1 &pcfg_pull_none_8ma>, /* mac_txd0 */ - <0 RK_PC1 1 &pcfg_pull_none>, + <0 RK_PC1 1 &pcfg_pull_none_8ma>, /* mac_txd3 */ - <0 RK_PC7 1 &pcfg_pull_none>, + <0 RK_PC7 1 &pcfg_pull_none_8ma>, /* mac_txd2 */ - <0 RK_PC6 1 &pcfg_pull_none>; + <0 RK_PC6 1 &pcfg_pull_none_8ma>; }; rmiim1_pins: rmiim1-pins { diff --git a/src/arm64/rockchip/rk3368-evb.dtsi b/src/arm64/rockchip/rk3368-evb.dtsi index 4de089149c50..e96eb62f362b 100644 --- a/src/arm64/rockchip/rk3368-evb.dtsi +++ b/src/arm64/rockchip/rk3368-evb.dtsi @@ -116,7 +116,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/src/arm64/rockchip/rk3368-geekbox.dts b/src/arm64/rockchip/rk3368-geekbox.dts index 6b9b1ac1994c..8fa550cbd1a4 100644 --- a/src/arm64/rockchip/rk3368-geekbox.dts +++ b/src/arm64/rockchip/rk3368-geekbox.dts @@ -78,7 +78,6 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; non-removable; vmmc-supply = <&vcc_io>; vqmmc-supply = <&vcc18_flash>; diff --git a/src/arm64/rockchip/rk3368-lion.dtsi b/src/arm64/rockchip/rk3368-lion.dtsi index 1315972412df..1b35d612b660 100644 --- a/src/arm64/rockchip/rk3368-lion.dtsi +++ b/src/arm64/rockchip/rk3368-lion.dtsi @@ -139,7 +139,6 @@ &emmc { bus-width = <8>; clock-frequency = <150000000>; - disable-wp; mmc-hs200-1_8v; non-removable; vmmc-supply = <&vcc33_io>; diff --git a/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/src/arm64/rockchip/rk3368-orion-r68-meta.dts index 96147d93dd1d..f5aa3cad67c5 100644 --- a/src/arm64/rockchip/rk3368-orion-r68-meta.dts +++ b/src/arm64/rockchip/rk3368-orion-r68-meta.dts @@ -161,7 +161,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; mmc-hs200-1_2v; mmc-hs200-1_8v; diff --git a/src/arm64/rockchip/rk3368-px5-evb.dts b/src/arm64/rockchip/rk3368-px5-evb.dts index fc1bf078a41f..41edcfd53184 100644 --- a/src/arm64/rockchip/rk3368-px5-evb.dts +++ b/src/arm64/rockchip/rk3368-px5-evb.dts @@ -48,7 +48,6 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; mmc-hs200-1_8v; no-sdio; no-sd; diff --git a/src/arm64/rockchip/rk3368-r88.dts b/src/arm64/rockchip/rk3368-r88.dts index 7452bedf1a7e..d34064c65f10 100644 --- a/src/arm64/rockchip/rk3368-r88.dts +++ b/src/arm64/rockchip/rk3368-r88.dts @@ -149,7 +149,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; mmc-pwrseq = <&emmc_pwrseq>; non-removable; pinctrl-names = "default"; diff --git a/src/arm64/rockchip/rk3368.dtsi b/src/arm64/rockchip/rk3368.dtsi index 7014d10b954c..06e7c31d7d07 100644 --- a/src/arm64/rockchip/rk3368.dtsi +++ b/src/arm64/rockchip/rk3368.dtsi @@ -73,7 +73,7 @@ cpu_l0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -81,7 +81,7 @@ cpu_l1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -89,7 +89,7 @@ cpu_l2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -97,7 +97,7 @@ cpu_l3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -105,7 +105,7 @@ cpu_b0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x100>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -113,7 +113,7 @@ cpu_b1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x101>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -121,7 +121,7 @@ cpu_b2: cpu@102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x102>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -129,7 +129,7 @@ cpu_b3: cpu@103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x103>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ diff --git a/src/arm64/rockchip/rk3399-gru-chromebook.dtsi b/src/arm64/rockchip/rk3399-gru-chromebook.dtsi index c400be64170e..931640e9aed4 100644 --- a/src/arm64/rockchip/rk3399-gru-chromebook.dtsi +++ b/src/arm64/rockchip/rk3399-gru-chromebook.dtsi @@ -200,6 +200,19 @@ pinctrl-0 = <&bl_en>; pwm-delay-us = <10000>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake_on_bt: wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; }; &ppvar_bigcpu { diff --git a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index fc50b3ef758c..62ea7d6a7d4a 100644 --- a/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -175,6 +175,21 @@ pinctrl-0 = <&dmic_en>; wakeup-delay-ms = <250>; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; + }; }; /* pp900_s0 aliases */ @@ -328,20 +343,6 @@ camera: &i2c7 { <400000000>; }; -&gpio_keys { - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>, <&pen_eject_odl>; - - pen-insert { - label = "Pen Insert"; - /* Insert = low, eject = high */ - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - wakeup-source; - }; -}; - &i2c_tunnel { google,remote-bus = <0>; }; @@ -437,8 +438,19 @@ camera: &i2c7 { status = "okay"; }; -&wake_on_bt { - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; +&usb_host0_ohci { + #address-cells = <1>; + #size-cells = <0>; + + qca_bt: bluetooth@1 { + compatible = "usbcf3,e300", "usb4ca,301a"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wakeup"; + }; }; /* PINCTRL OVERRIDES */ @@ -455,7 +467,7 @@ camera: &i2c7 { }; &bt_host_wake_l { - rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>; }; &ec_ap_int_l { diff --git a/src/arm64/rockchip/rk3399-gru.dtsi b/src/arm64/rockchip/rk3399-gru.dtsi index ea607a601a86..da03fa9c5662 100644 --- a/src/arm64/rockchip/rk3399-gru.dtsi +++ b/src/arm64/rockchip/rk3399-gru.dtsi @@ -269,19 +269,6 @@ #clock-cells = <0>; }; - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_l>; - - wake_on_bt: wake-on-bt { - label = "Wake-on-Bluetooth"; - gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; - linux,code = ; - wakeup-source; - }; - }; - max98357a: max98357a { compatible = "maxim,max98357a"; pinctrl-names = "default"; diff --git a/src/arm64/rockchip/rk3399-nanopc-t4.dts b/src/arm64/rockchip/rk3399-nanopc-t4.dts new file mode 100644 index 000000000000..84433cf02be9 --- /dev/null +++ b/src/arm64/rockchip/rk3399-nanopc-t4.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPC-T4 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + */ + +/dts-v1/; +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyElec NanoPC-T4"; + compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399"; + + vcc12v0_sys: vcc12v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "vcc12v0_sys"; + }; + + vcc5v0_host0: vcc5v0-host0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc5v0_host0"; + vin-supply = <&vcc5v0_sys>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = ; + press-threshold-microvolt = <18000>; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx>; + }; +}; + +&pinctrl { + ir { + ir_rx: ir-rx { + /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */ + rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>; + }; + }; +}; + +&sdhci { + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host0>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host0>; +}; + +&vcc5v0_sys { + vin-supply = <&vcc12v0_sys>; +}; + +&vcc3v3_sys { + vin-supply = <&vcc12v0_sys>; +}; + +&vbus_typec { + enable-active-high; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_sys>; +}; diff --git a/src/arm64/rockchip/rk3399-nanopi-m4.dts b/src/arm64/rockchip/rk3399-nanopi-m4.dts new file mode 100644 index 000000000000..60358ab8c7df --- /dev/null +++ b/src/arm64/rockchip/rk3399-nanopi-m4.dts @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * FriendlyElec NanoPi M4 board device tree source + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + */ + +/dts-v1/; +#include "rk3399-nanopi4.dtsi" + +/ { + model = "FriendlyElec NanoPi M4"; + compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399"; + + vdd_5v: vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_core: vcc5v0-core { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; + + vcc5v0_usb1: vcc5v0-usb1 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb1"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2: vcc5v0-usb2 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb2"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&vcc3v3_sys { + vin-supply = <&vcc5v0_core>; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_usb1>; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_usb2>; +}; + +&vbus_typec { + regulator-always-on; + vin-supply = <&vdd_5v>; +}; diff --git a/src/arm64/rockchip/rk3399-nanopi4.dtsi b/src/arm64/rockchip/rk3399-nanopi4.dtsi new file mode 100644 index 000000000000..d325e117287b --- /dev/null +++ b/src/arm64/rockchip/rk3399-nanopi4.dtsi @@ -0,0 +1,703 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * RK3399-based FriendlyElec boards device tree source + * + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2018 Collabora Ltd. + * Copyright (c) 2019 Arm Ltd. + */ + +/dts-v1/; +#include +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_sys"; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vcc5v0_sys"; + vin-supply = <&vdd_5v>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_s3"; + vin-supply = <&vcc_1v8>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_pwr_h>; + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc3v0_sd"; + vin-supply = <&vcc3v3_sys>; + }; + + vbus_typec: vbus-typec { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "vbus_typec"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = ; + wakeup-source; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_gpio>; + + status { + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + label = "status_led"; + linux,default-trigger = "heartbeat"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clock-parents = <&clkin_gmac>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-supply = <&vcc3v3_s3>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c7>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu_b"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + #clock-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_center"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_cpu_l"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_cam: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_cam"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc3v0_touch"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_pmupll"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <3000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_sdio"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcca3v0_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc_1v5"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_codec"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc_3v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s3"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <200000>; + i2c-scl-rising-time-ns = <150>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vbus_typec>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc_1v8>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pcie_phy { + assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; + assigned-clock-rates = <100000000>; + assigned-clocks = <&cru SCLK_PCIEPHY_REF>; + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + status = "okay"; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + leds_gpio: leds-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + power_key: power-key { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc0_det_l: sdmmc0-det-l { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + sdmmc0_pwr_h: sdmmc0-pwr-h { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm2_pin_pull_down>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/src/arm64/rockchip/rk3399-rock-pi-4.dts b/src/arm64/rockchip/rk3399-rock-pi-4.dts new file mode 100644 index 000000000000..844eac939a97 --- /dev/null +++ b/src/arm64/rockchip/rk3399-rock-pi-4.dts @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar + * Copyright (c) 2019 Pragnesh Patel + */ + +/dts-v1/; +#include +#include +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Radxa ROCK Pi 4"; + compatible = "radxa,rockpi4", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc12v_dcin: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_lan: vcc3v3-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_codec: LDO_REG1 { + regulator-name = "vcc1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_cam: SWITCH_REG1 { + regulator-name = "vcc_cam"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: SWITCH_REG2 { + regulator-name = "vcc_mipi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc_3v0>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0-typec-en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/src/arm64/rockchip/rk3399-rock960.dtsi b/src/arm64/rockchip/rk3399-rock960.dtsi index 56abbb08c133..2927db4dda9d 100644 --- a/src/arm64/rockchip/rk3399-rock960.dtsi +++ b/src/arm64/rockchip/rk3399-rock960.dtsi @@ -9,6 +9,15 @@ #include "rk3399-opp.dtsi" / { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc1v8_s0: vcc1v8-s0 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s0"; @@ -94,6 +103,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -336,6 +349,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */ @@ -362,6 +379,20 @@ }; &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus1: sdmmc-bus1 { rockchip,pins = @@ -387,6 +418,26 @@ }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = @@ -403,6 +454,19 @@ <1 14 RK_FUNC_GPIO &pcfg_pull_down>; }; }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -413,6 +477,32 @@ status = "okay"; }; +&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = ; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; @@ -437,10 +527,28 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; }; &uart2 { diff --git a/src/arm64/rockchip/rk3399-rockpro64.dts b/src/arm64/rockchip/rk3399-rockpro64.dts index be78172abc09..1f2394e0587d 100644 --- a/src/arm64/rockchip/rk3399-rockpro64.dts +++ b/src/arm64/rockchip/rk3399-rockpro64.dts @@ -25,15 +25,6 @@ #clock-cells = <0>; }; - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - gpio-keys { compatible = "gpio-keys"; autorepeat; @@ -83,6 +74,15 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -103,7 +103,7 @@ regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; - vin-supply = <&dc_12v>; + vin-supply = <&vcc12v_dcin>; }; vcc3v3_sys: vcc3v3-sys { @@ -113,7 +113,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -125,7 +125,7 @@ pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_usb>; }; vcc5v0_typec: vcc5v0-typec-regulator { @@ -136,17 +136,27 @@ pinctrl-0 = <&vcc5v0_typec_en>; regulator-name = "vcc5v0_typec"; regulator-always-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_usb>; }; - vcc_sys: vcc-sys { + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; + regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; }; vdd_log: vdd-log { @@ -157,7 +167,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -212,6 +222,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -230,18 +245,18 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; + vddio-supply = <&vcca_1v8>; regulators { vdd_center: DCDC_REG1 { @@ -311,8 +326,8 @@ }; }; - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; @@ -413,7 +428,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -432,7 +447,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc_sys>; + vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -522,12 +537,6 @@ }; }; - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/src/arm64/rockchip/rk3399-sapphire-excavator.dts b/src/arm64/rockchip/rk3399-sapphire-excavator.dts index b48a63c3efc3..808ea77f951d 100644 --- a/src/arm64/rockchip/rk3399-sapphire-excavator.dts +++ b/src/arm64/rockchip/rk3399-sapphire-excavator.dts @@ -219,7 +219,6 @@ cap-sd-highspeed; cap-sdio-irq; clock-frequency = <50000000>; - disable-wp; keep-power-in-suspend; max-frequency = <50000000>; mmc-pwrseq = <&sdio_pwrseq>; diff --git a/src/arm64/rockchip/rk3399.dtsi b/src/arm64/rockchip/rk3399.dtsi index 6cc1c9fa4ea6..db9d948c0b03 100644 --- a/src/arm64/rockchip/rk3399.dtsi +++ b/src/arm64/rockchip/rk3399.dtsi @@ -68,7 +68,7 @@ cpu_l0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -79,7 +79,7 @@ cpu_l1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -90,7 +90,7 @@ cpu_l2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -101,7 +101,7 @@ cpu_l3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&cru ARMCLKL>; @@ -112,7 +112,7 @@ cpu_b0: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x100>; enable-method = "psci"; clocks = <&cru ARMCLKB>; @@ -123,7 +123,7 @@ cpu_b1: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0x0 0x101>; enable-method = "psci"; clocks = <&cru ARMCLKB>; diff --git a/src/arm64/socionext/uniphier-ld11.dtsi b/src/arm64/socionext/uniphier-ld11.dtsi index 31ba52b14e99..a3cd475b48d2 100644 --- a/src/arm64/socionext/uniphier-ld11.dtsi +++ b/src/arm64/socionext/uniphier-ld11.dtsi @@ -33,7 +33,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -42,7 +42,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; diff --git a/src/arm64/socionext/uniphier-ld20-global.dts b/src/arm64/socionext/uniphier-ld20-global.dts index d7ae28afef7d..9ca692ed1b2b 100644 --- a/src/arm64/socionext/uniphier-ld20-global.dts +++ b/src/arm64/socionext/uniphier-ld20-global.dts @@ -145,10 +145,10 @@ }; }; -&nand { - status = "okay"; -}; - &usb { status = "okay"; }; + +&nand { + status = "okay"; +}; diff --git a/src/arm64/socionext/uniphier-ld20.dtsi b/src/arm64/socionext/uniphier-ld20.dtsi index 4a0c46cb11cd..017f6328c191 100644 --- a/src/arm64/socionext/uniphier-ld20.dtsi +++ b/src/arm64/socionext/uniphier-ld20.dtsi @@ -43,7 +43,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x000>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -53,7 +53,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x001>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -63,7 +63,7 @@ cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x100>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -73,7 +73,7 @@ cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x101>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -869,6 +869,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/src/arm64/socionext/uniphier-pxs3-ref.dts b/src/arm64/socionext/uniphier-pxs3-ref.dts index a41f7cac952a..1965e4dfe4a4 100644 --- a/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -101,10 +101,6 @@ }; }; -&nand { - status = "okay"; -}; - &usb0 { status = "okay"; }; @@ -112,3 +108,11 @@ &usb1 { status = "okay"; }; + +&pcie { + status = "okay"; +}; + +&nand { + status = "okay"; +}; diff --git a/src/arm64/socionext/uniphier-pxs3.dtsi b/src/arm64/socionext/uniphier-pxs3.dtsi index 4f57c9e9d7a8..bb97abe1a55f 100644 --- a/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/src/arm64/socionext/uniphier-pxs3.dtsi @@ -39,7 +39,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -48,7 +48,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -57,7 +57,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x002>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -66,7 +66,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x003>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -727,6 +727,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-pxs3-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/src/arm64/sprd/sc2731.dtsi b/src/arm64/sprd/sc2731.dtsi index 82bd642d770b..e15409f55f43 100644 --- a/src/arm64/sprd/sc2731.dtsi +++ b/src/arm64/sprd/sc2731.dtsi @@ -13,12 +13,18 @@ spi-max-frequency = <26000000>; interrupts = ; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>; + charger@0 { + compatible = "sprd,sc2731-charger"; + reg = <0x0>; + monitored-battery = <&bat>; + }; + led-controller@200 { - compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc"; + compatible = "sprd,sc2731-bltc"; reg = <0x200>; #address-cells = <1>; #size-cells = <0>; @@ -40,17 +46,17 @@ }; rtc@280 { - compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; + compatible = "sprd,sc2731-rtc"; reg = <0x280>; interrupt-parent = <&sc2731_pmic>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <2>; }; pmic_eic: gpio@300 { - compatible = "sprd,sc27xx-eic"; + compatible = "sprd,sc2731-eic"; reg = <0x300>; interrupt-parent = <&sc2731_pmic>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -58,29 +64,57 @@ }; efuse@380 { - compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse"; + compatible = "sprd,sc2731-efuse"; reg = <0x380>; #address-cells = <1>; #size-cells = <1>; hwlocks = <&hwlock 12>; + + fgu_calib: calib@6 { + reg = <0x6 0x2>; + bits = <0 9>; + }; + + adc_big_scale: calib@24 { + reg = <0x24 0x2>; + }; + + adc_small_scale: calib@26 { + reg = <0x26 0x2>; + }; }; pmic_adc: adc@480 { - compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc"; + compatible = "sprd,sc2731-adc"; reg = <0x480>; interrupt-parent = <&sc2731_pmic>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; #io-channel-cells = <1>; hwlocks = <&hwlock 4>; + nvmem-cell-names = "big_scale_calib", "small_scale_calib"; + nvmem-cells = <&adc_big_scale>, <&adc_small_scale>; + }; + + fgu@a00 { + compatible = "sprd,sc2731-fgu"; + reg = <0xa00>; + bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; + io-channels = <&pmic_adc 3>, <&pmic_adc 6>; + io-channel-names = "bat-temp", "charge-vol"; + monitored-battery = <&bat>; + nvmem-cell-names = "fgu_calib"; + nvmem-cells = <&fgu_calib>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <4>; }; vibrator@ec8 { - compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator"; + compatible = "sprd,sc2731-vibrator"; reg = <0xec8>; }; regulators { - compatible = "sprd,sc27xx-regulator"; + compatible = "sprd,sc2731-regulator"; vddarm0: BUCK_CPU0 { regulator-name = "vddarm0"; diff --git a/src/arm64/sprd/sc9836.dtsi b/src/arm64/sprd/sc9836.dtsi index 4bcdbb709c01..286d7173f94f 100644 --- a/src/arm64/sprd/sc9836.dtsi +++ b/src/arm64/sprd/sc9836.dtsi @@ -18,28 +18,28 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; }; diff --git a/src/arm64/sprd/sc9860.dtsi b/src/arm64/sprd/sc9860.dtsi index 5f57bf055cde..b25d19977170 100644 --- a/src/arm64/sprd/sc9860.dtsi +++ b/src/arm64/sprd/sc9860.dtsi @@ -50,7 +50,7 @@ CPU0: cpu@530000 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530000>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -58,7 +58,7 @@ CPU1: cpu@530001 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530001>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -66,7 +66,7 @@ CPU2: cpu@530002 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530002>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -74,7 +74,7 @@ CPU3: cpu@530003 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530003>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -82,7 +82,7 @@ CPU4: cpu@530100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530100>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -90,7 +90,7 @@ CPU5: cpu@530101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530101>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -98,7 +98,7 @@ CPU6: cpu@530102 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530102>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; @@ -106,7 +106,7 @@ CPU7: cpu@530103 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x530103>; enable-method = "psci"; cpu-idle-states = <&CORE_PD &CLUSTER_PD>; diff --git a/src/arm64/sprd/sp9860g-1h10.dts b/src/arm64/sprd/sp9860g-1h10.dts index 985ebb5d157e..6b95fd94cee3 100644 --- a/src/arm64/sprd/sp9860g-1h10.dts +++ b/src/arm64/sprd/sp9860g-1h10.dts @@ -39,6 +39,22 @@ #size-cells = <2>; ranges; }; + + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <1900000>; + charge-term-current-microamp = <120000>; + constant_charge_voltage_max_microvolt = <4350000>; + internal-resistance-micro-ohms = <250000>; + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, + <4022000 85>, <3983000 80>, <3949000 75>, + <3917000 70>, <3889000 65>, <3864000 60>, + <3835000 55>, <3805000 50>, <3787000 45>, + <3777000 40>, <3773000 35>, <3770000 30>, + <3765000 25>, <3752000 20>, <3724000 15>, + <3680000 10>, <3605000 5>, <3400000 0>; + }; }; &uart0 { diff --git a/src/arm64/synaptics/as370.dtsi b/src/arm64/synaptics/as370.dtsi index 7331acf3874e..addeb0efc616 100644 --- a/src/arm64/synaptics/as370.dtsi +++ b/src/arm64/synaptics/as370.dtsi @@ -23,7 +23,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0>; enable-method = "psci"; @@ -32,7 +32,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x1>; enable-method = "psci"; @@ -41,7 +41,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x2>; enable-method = "psci"; @@ -50,7 +50,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x3>; enable-method = "psci"; diff --git a/src/arm64/synaptics/berlin4ct.dtsi b/src/arm64/synaptics/berlin4ct.dtsi index 216767e2edf6..15625b99e336 100644 --- a/src/arm64/synaptics/berlin4ct.dtsi +++ b/src/arm64/synaptics/berlin4ct.dtsi @@ -27,7 +27,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x0>; enable-method = "psci"; @@ -36,7 +36,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x1>; enable-method = "psci"; @@ -45,7 +45,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x2>; enable-method = "psci"; @@ -54,7 +54,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0x3>; enable-method = "psci"; diff --git a/src/arm64/ti/k3-am65-main.dtsi b/src/arm64/ti/k3-am65-main.dtsi index 272cf8fc8d30..752455269fab 100644 --- a/src/arm64/ti/k3-am65-main.dtsi +++ b/src/arm64/ti/k3-am65-main.dtsi @@ -6,6 +6,26 @@ */ &cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x200000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + + sysfw-sram@f0000 { + reg = <0xf0000 0x10000>; + }; + + l3cache-sram@100000 { + reg = <0x100000 0x100000>; + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -191,4 +211,102 @@ #address-cells = <1>; #size-cells = <0>; }; + + sdhci0: sdhci@4f80000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; + power-domains = <&k3_pds 47>; + clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = ; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + dma-coherent; + }; + + scm_conf: scm_conf@100000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x00100000 0 0x1c000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x00100000 0x1c000>; + }; + + dwc3_0: dwc3@4000000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4000000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4000000 0x20000>; + interrupts = ; + dma-coherent; + power-domains = <&k3_pds 151>; + assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; + assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ + + usb0: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + snps,dis_u3_susphy_quirk; + }; + }; + + usb0_phy: phy@4100000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4100000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4000>; + clocks = <&k3_clks 151 0>, <&k3_clks 151 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; + + dwc3_1: dwc3@4020000 { + compatible = "ti,am654-dwc3"; + reg = <0x0 0x4020000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x4020000 0x20000>; + interrupts = ; + dma-coherent; + power-domains = <&k3_pds 152>; + assigned-clocks = <&k3_clks 152 2>; + assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ + + usb1: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x10000>; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + }; + }; + + usb1_phy: phy@4110000 { + compatible = "ti,am654-usb2", "ti,omap-usb2"; + reg = <0x0 0x4110000 0x0 0x54>; + syscon-phy-power = <&scm_conf 0x4020>; + clocks = <&k3_clks 152 0>, <&k3_clks 152 1>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + }; }; diff --git a/src/arm64/ti/k3-am65-mcu.dtsi b/src/arm64/ti/k3-am65-mcu.dtsi index 593f718e8fb5..6f7d2b316ded 100644 --- a/src/arm64/ti/k3-am65-mcu.dtsi +++ b/src/arm64/ti/k3-am65-mcu.dtsi @@ -57,4 +57,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; + reg = <0x0 0x40200000 0x0 0x1000>; + interrupts = ; + clocks = <&k3_clks 0 2>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am654-adc", "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; + reg = <0x0 0x40210000 0x0 0x1000>; + interrupts = ; + clocks = <&k3_clks 1 2>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am654-adc", "ti,am3359-adc"; + }; + }; }; diff --git a/src/arm64/ti/k3-am654-base-board.dts b/src/arm64/ti/k3-am654-base-board.dts index e41fc3a5987b..cf1aa276a1ea 100644 --- a/src/arm64/ti/k3-am654-base-board.dts +++ b/src/arm64/ti/k3-am654-base-board.dts @@ -69,6 +69,29 @@ AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ >; }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ + AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ + AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ + AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ + AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ + AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ + AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ + AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ + AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ + AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ + AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ + AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ + >; + }; + + usb1_pins_default: usb1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ + >; + }; }; &main_pmx1 { @@ -163,3 +186,45 @@ #size-cells= <1>; }; }; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + bus-width = <8>; + non-removable; + ti,driver-strength-ohm = <50>; +}; + +&dwc3_1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; + dr_mode = "otg"; +}; + +&dwc3_0 { + status = "disabled"; +}; + +&usb0_phy { + status = "disabled"; +}; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/src/arm64/ti/k3-am654.dtsi b/src/arm64/ti/k3-am654.dtsi index 2affa6f6617e..b221abf43ac2 100644 --- a/src/arm64/ti/k3-am654.dtsi +++ b/src/arm64/ti/k3-am654.dtsi @@ -34,7 +34,7 @@ }; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x000>; device_type = "cpu"; enable-method = "psci"; @@ -48,7 +48,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x001>; device_type = "cpu"; enable-method = "psci"; @@ -62,7 +62,7 @@ }; cpu2: cpu@100 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x100>; device_type = "cpu"; enable-method = "psci"; @@ -76,7 +76,7 @@ }; cpu3: cpu@101 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x101>; device_type = "cpu"; enable-method = "psci"; diff --git a/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/src/arm64/xilinx/zynqmp-zcu100-revC.dts index 13a0a028df98..e5699d0d91e4 100644 --- a/src/arm64/xilinx/zynqmp-zcu100-revC.dts +++ b/src/arm64/xilinx/zynqmp-zcu100-revC.dts @@ -101,6 +101,7 @@ sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + post-power-on-delay-ms = <10>; }; }; diff --git a/src/arm64/xilinx/zynqmp.dtsi b/src/arm64/xilinx/zynqmp.dtsi index fa4fd777d90e..9aa67340a4d8 100644 --- a/src/arm64/xilinx/zynqmp.dtsi +++ b/src/arm64/xilinx/zynqmp.dtsi @@ -22,7 +22,7 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; operating-points-v2 = <&cpu_opp_table>; @@ -31,7 +31,7 @@ }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x1>; @@ -40,7 +40,7 @@ }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x2>; @@ -49,7 +49,7 @@ }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; enable-method = "psci"; reg = <0x3>; diff --git a/src/arm64/zte/zx296718.dtsi b/src/arm64/zte/zx296718.dtsi index 6eef64761009..cc54837ff4ba 100644 --- a/src/arm64/zte/zx296718.dtsi +++ b/src/arm64/zte/zx296718.dtsi @@ -86,7 +86,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -95,7 +95,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -104,7 +104,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x2>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; @@ -113,7 +113,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53","arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0x0 0x3>; enable-method = "psci"; clocks = <&topcrm A53_GATE>; diff --git a/src/mips/cavium-octeon/octeon_3xxx.dts b/src/mips/cavium-octeon/octeon_3xxx.dts index 0fa3dd1819ff..dda0559cef50 100644 --- a/src/mips/cavium-octeon/octeon_3xxx.dts +++ b/src/mips/cavium-octeon/octeon_3xxx.dts @@ -180,14 +180,28 @@ ethernet@0 { phy-handle = <&phy2>; cavium,alt-phy-handle = <&phy100>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@1 { phy-handle = <&phy3>; cavium,alt-phy-handle = <&phy101>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@2 { phy-handle = <&phy4>; cavium,alt-phy-handle = <&phy102>; + rx-delay = <0>; + tx-delay = <0>; }; ethernet@3 { compatible = "cavium,octeon-3860-pip-port"; diff --git a/src/mips/cavium-octeon/ubnt_e100.dts b/src/mips/cavium-octeon/ubnt_e100.dts index 243e5dc444fb..962f37fbc7db 100644 --- a/src/mips/cavium-octeon/ubnt_e100.dts +++ b/src/mips/cavium-octeon/ubnt_e100.dts @@ -33,12 +33,18 @@ interface@0 { ethernet@0 { phy-handle = <&phy7>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@1 { phy-handle = <&phy6>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@2 { phy-handle = <&phy5>; + rx-delay = <0>; + tx-delay = <0x10>; }; }; }; diff --git a/src/powerpc/akebono.dts b/src/powerpc/akebono.dts index 8a7a10139bc9..cd9d66041a3f 100644 --- a/src/powerpc/akebono.dts +++ b/src/powerpc/akebono.dts @@ -40,7 +40,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/src/powerpc/bluestone.dts b/src/powerpc/bluestone.dts index b0b26d8d68a2..64eaf7e09d22 100644 --- a/src/powerpc/bluestone.dts +++ b/src/powerpc/bluestone.dts @@ -109,7 +109,7 @@ OCM: ocm@400040000 { compatible = "ibm,ocm"; - status = "ok"; + status = "okay"; cell-index = <1>; /* configured in U-Boot */ reg = <4 0x00040000 0x8000>; /* 32K */ diff --git a/src/powerpc/currituck.dts b/src/powerpc/currituck.dts index a04a4fcfde63..b6d87b9c2cef 100644 --- a/src/powerpc/currituck.dts +++ b/src/powerpc/currituck.dts @@ -39,7 +39,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/src/powerpc/iss4xx-mpic.dts b/src/powerpc/iss4xx-mpic.dts index f7063198b2dc..c9f90f1a9c8e 100644 --- a/src/powerpc/iss4xx-mpic.dts +++ b/src/powerpc/iss4xx-mpic.dts @@ -43,7 +43,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - status = "ok"; + status = "okay"; }; cpu@1 { device_type = "cpu"; diff --git a/src/powerpc/wii.dts b/src/powerpc/wii.dts index 104b1d6d5695..c406bdb4f36f 100644 --- a/src/powerpc/wii.dts +++ b/src/powerpc/wii.dts @@ -14,6 +14,7 @@ /dts-v1/; #include +#include /* * This is commented-out for now. @@ -187,6 +188,11 @@ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3", "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7"; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <10>; + interrupt-parent = <&PIC1>; + /* * This is commented out while a standard binding * for i2c over gpio is defined. @@ -235,5 +241,21 @@ panic-indicator; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&GPIO 0 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + eject { + label = "Eject Button"; + gpios = <&GPIO 6 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; };