Update DTS files from Linux 4.12
Notable changes: Allwinner: * H3/H5 were merged into a common dtsi file * include/dt-bindings/sun4i-a10.h is not included anymore in a lot of dts files * Add sun8i-h3-nanopi-neo-air board DTS file
This commit is contained in:
commit
78955d65bd
@ -41,28 +41,28 @@
|
||||
compatible = "arm,cortex-a15";
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <1700000000>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
compatible = "arm,cortex-a15";
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <1700000000>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
compatible = "arm,cortex-a15";
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <1700000000>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
compatible = "arm,cortex-a15";
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <1700000000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -81,7 +81,7 @@
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
/* Interrupt Controller */
|
||||
@ -120,26 +120,26 @@
|
||||
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
uart0:uart@fd883000 {
|
||||
uart0: uart@fd883000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0xfd883000 0x0 0x1000>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <375000000>;
|
||||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
uart1:uart@0xfd884000 {
|
||||
uart1: uart@fd884000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x0 0xfd884000 0x0 0x1000>;
|
||||
clock-frequency = <0>; /* Filled by loader */
|
||||
clock-frequency = <375000000>;
|
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
/* Internal PCIe Controller */
|
||||
pcie-internal@0xfbc00000 {
|
||||
pcie@fbc00000 {
|
||||
compatible = "pci-host-ecam-generic";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
|
@ -14,6 +14,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "am335x-baltos.dtsi"
|
||||
#include "am335x-baltos-leds.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OnRISC Baltos iR 2110";
|
||||
|
@ -14,6 +14,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "am335x-baltos.dtsi"
|
||||
#include "am335x-baltos-leds.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OnRISC Baltos iR 3220";
|
||||
|
@ -14,6 +14,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "am335x-baltos.dtsi"
|
||||
#include "am335x-baltos-leds.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OnRISC Baltos iR 5221";
|
||||
|
50
sys/gnu/dts/arm/am335x-baltos-leds.dtsi
Normal file
50
sys/gnu/dts/arm/am335x-baltos-leds.dtsi
Normal file
@ -0,0 +1,50 @@
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* VScom OnRISC
|
||||
* http://www.vscom.de
|
||||
*/
|
||||
|
||||
/*#include "am33xx.dtsi"*/
|
||||
|
||||
/ {
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "onrisc:red:power";
|
||||
linux,default-trigger = "default-on";
|
||||
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
wlan {
|
||||
label = "onrisc:blue:wlan";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
app {
|
||||
label = "onrisc:green:app";
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
user_leds: pinmux_user_leds {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 PWR LED */
|
||||
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd3.gpio0_16 WLAN LED */
|
||||
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mii1_txd2.gpio0_17 APP LED */
|
||||
>;
|
||||
};
|
||||
};
|
@ -15,3 +15,14 @@
|
||||
model = "TI AM335x BeagleBone Black";
|
||||
compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
/*
|
||||
* All PG 2.0 silicon may not support 1GHz but some of the early
|
||||
* BeagleBone Blacks have PG 2.0 silicon which is guaranteed
|
||||
* to support 1GHz OPP so enable it for PG 2.0 on this board.
|
||||
*/
|
||||
oppnitro@1000000000 {
|
||||
opp-supported-hw = <0x06 0x0100>;
|
||||
};
|
||||
};
|
||||
|
@ -201,6 +201,69 @@
|
||||
AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1, RMII mode */
|
||||
AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_crs.rmii1_crs_dv */
|
||||
AM33XX_IOPAD(0x944, (PIN_INPUT_PULLUP | MUX_MODE0)) /* rmii1_refclk.rmii1_refclk */
|
||||
AM33XX_IOPAD(0x940, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd0.rmii1_rxd0 */
|
||||
AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxd1.rmii1_rxd1 */
|
||||
AM33XX_IOPAD(0x910, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_rxerr.rmii1_rxerr */
|
||||
AM33XX_IOPAD(0x928, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd0.rmii1_txd0 */
|
||||
AM33XX_IOPAD(0x924, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txd1.rmii1_txd1 */
|
||||
AM33XX_IOPAD(0x914, (PIN_OUTPUT_PULLDOWN | MUX_MODE1)) /* mii1_txen.rmii1_txen */
|
||||
/* Slave 2, RMII mode */
|
||||
AM33XX_IOPAD(0x870, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wait0.rmii2_crs_dv */
|
||||
AM33XX_IOPAD(0x908, (PIN_INPUT_PULLUP | MUX_MODE1)) /* mii1_col.rmii2_refclk */
|
||||
AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a11.rmii2_rxd0 */
|
||||
AM33XX_IOPAD(0x868, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_a10.rmii2_rxd1 */
|
||||
AM33XX_IOPAD(0x874, (PIN_INPUT_PULLUP | MUX_MODE3)) /* gpmc_wpn.rmii2_rxerr */
|
||||
AM33XX_IOPAD(0x854, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a5.rmii2_txd0 */
|
||||
AM33XX_IOPAD(0x850, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a4.rmii2_txd1 */
|
||||
AM33XX_IOPAD(0x840, (PIN_OUTPUT_PULLDOWN | MUX_MODE3)) /* gpmc_a0.rmii2_txen */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
AM33XX_IOPAD(0x90c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x944, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x940, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x93c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x910, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x928, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x924, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x914, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
|
||||
/* Slave 2 reset value */
|
||||
AM33XX_IOPAD(0x870, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x908, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x86c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x868, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x874, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x854, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x850, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x840, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
AM33XX_IOPAD(0x948, (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)) /* mdio_data.mdio_data */
|
||||
AM33XX_IOPAD(0x94c, (PIN_OUTPUT_PULLUP | MUX_MODE0)) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
AM33XX_IOPAD(0x948, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
AM33XX_IOPAD(0x94c, (PIN_INPUT_PULLDOWN | MUX_MODE7))
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
@ -245,6 +308,39 @@
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpol;
|
||||
};
|
||||
|
||||
spi_nor: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "winbond,w25q64", "jedec,spi-nor";
|
||||
spi-max-frequency = <80000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot-spl";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "u-boot";
|
||||
reg = <0x80000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3 {
|
||||
label = "misc";
|
||||
reg = <0x1A0000 0x660000>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
@ -350,3 +446,61 @@
|
||||
pinctrl-0 = <&uart3_pins_default>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
p4 {
|
||||
gpio-hog;
|
||||
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PR1_MII_CTRL";
|
||||
};
|
||||
|
||||
p10 {
|
||||
gpio-hog;
|
||||
gpios = <10 GPIO_ACTIVE_HIGH>;
|
||||
/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
|
||||
output-high;
|
||||
line-name = "MUX_MII_CTL1";
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy-handle = <ðphy0>;
|
||||
phy-mode = "rmii";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy-handle = <ðphy1>;
|
||||
phy-mode = "rmii";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
status = "okay";
|
||||
dual_emac;
|
||||
};
|
||||
|
||||
&phy_sel {
|
||||
rmii-clock-ext;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
status = "okay";
|
||||
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <2>; /* PHY datasheet states 1uS min */
|
||||
|
||||
ethphy0: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
|
@ -220,7 +220,7 @@
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
|
||||
>;
|
||||
};
|
||||
|
||||
@ -280,10 +280,6 @@
|
||||
AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
|
||||
AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */
|
||||
AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
|
||||
/* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
|
||||
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
|
||||
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
|
||||
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
|
||||
/* PDI Bus - Battery system */
|
||||
AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
|
||||
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
|
||||
@ -384,7 +380,7 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
};
|
||||
|
||||
|
@ -46,19 +46,7 @@
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
|
||||
/*
|
||||
* To consider voltage drop between PMIC and SoC,
|
||||
* tolerance value is reduced to 2% from 4% and
|
||||
* voltage value is increased as a precaution.
|
||||
*/
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
720000 1285000
|
||||
600000 1225000
|
||||
500000 1125000
|
||||
275000 1125000
|
||||
>;
|
||||
voltage-tolerance = <2>; /* 2 percentage */
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
|
||||
clocks = <&dpll_mpu_ck>;
|
||||
clock-names = "cpu";
|
||||
@ -67,6 +55,79 @@
|
||||
};
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp-table {
|
||||
compatible = "operating-points-v2-ti-cpu";
|
||||
syscon = <&scm_conf>;
|
||||
|
||||
/*
|
||||
* The three following nodes are marked with opp-suspend
|
||||
* because the can not be enabled simultaneously on a
|
||||
* single SoC.
|
||||
*/
|
||||
opp50@300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <950000 931000 969000>;
|
||||
opp-supported-hw = <0x06 0x0010>;
|
||||
opp-suspend;
|
||||
};
|
||||
|
||||
opp100@275000000 {
|
||||
opp-hz = /bits/ 64 <275000000>;
|
||||
opp-microvolt = <1100000 1078000 1122000>;
|
||||
opp-supported-hw = <0x01 0x00FF>;
|
||||
opp-suspend;
|
||||
};
|
||||
|
||||
opp100@300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <1100000 1078000 1122000>;
|
||||
opp-supported-hw = <0x06 0x0020>;
|
||||
opp-suspend;
|
||||
};
|
||||
|
||||
opp100@500000000 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <1100000 1078000 1122000>;
|
||||
opp-supported-hw = <0x01 0xFFFF>;
|
||||
};
|
||||
|
||||
opp100@600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <1100000 1078000 1122000>;
|
||||
opp-supported-hw = <0x06 0x0040>;
|
||||
};
|
||||
|
||||
opp120@600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <1200000 1176000 1224000>;
|
||||
opp-supported-hw = <0x01 0xFFFF>;
|
||||
};
|
||||
|
||||
opp120@720000000 {
|
||||
opp-hz = /bits/ 64 <720000000>;
|
||||
opp-microvolt = <1200000 1176000 1224000>;
|
||||
opp-supported-hw = <0x06 0x0080>;
|
||||
};
|
||||
|
||||
oppturbo@720000000 {
|
||||
opp-hz = /bits/ 64 <720000000>;
|
||||
opp-microvolt = <1260000 1234800 1285200>;
|
||||
opp-supported-hw = <0x01 0xFFFF>;
|
||||
};
|
||||
|
||||
oppturbo@800000000 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <1260000 1234800 1285200>;
|
||||
opp-supported-hw = <0x06 0x0100>;
|
||||
};
|
||||
|
||||
oppnitro@1000000000 {
|
||||
opp-hz = /bits/ 64 <1000000000>;
|
||||
opp-microvolt = <1325000 1298500 1351500>;
|
||||
opp-supported-hw = <0x04 0x0200>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a8-pmu";
|
||||
interrupts = <3>;
|
||||
|
@ -13,6 +13,7 @@
|
||||
/ {
|
||||
aliases {
|
||||
serial3 = &uart4;
|
||||
can = &hecc;
|
||||
};
|
||||
|
||||
ocp@68000000 {
|
||||
@ -72,6 +73,17 @@
|
||||
pinctrl-single,register-width = <16>;
|
||||
pinctrl-single,function-mask = <0xff1f>;
|
||||
};
|
||||
|
||||
hecc: can@5c050000 {
|
||||
compatible = "ti,am3517-hecc";
|
||||
status = "disabled";
|
||||
reg = <0x5c050000 0x80>,
|
||||
<0x5c053000 0x180>,
|
||||
<0x5c052000 0x200>;
|
||||
reg-names = "hecc", "hecc-ram", "mbx";
|
||||
interrupts = <24>;
|
||||
clocks = <&hecc_ck>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -50,15 +50,14 @@
|
||||
clock-names = "cpu";
|
||||
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
|
||||
ti,syscon-rev = <&scm_conf 0x600>;
|
||||
|
||||
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||||
};
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp_table0 {
|
||||
compatible = "operating-points-v2";
|
||||
cpu0_opp_table: opp-table {
|
||||
compatible = "operating-points-v2-ti-cpu";
|
||||
syscon = <&scm_conf>;
|
||||
|
||||
opp50@300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
|
@ -501,6 +501,21 @@
|
||||
AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins_default: uart0_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
|
||||
AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
|
||||
AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||||
AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
|
@ -101,6 +101,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
|
||||
DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_sleep: dcan1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
|
||||
DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
@ -391,6 +407,14 @@
|
||||
max-frequency = <96000000>;
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "sleep", "active";
|
||||
pinctrl-0 = <&dcan1_pins_sleep>;
|
||||
pinctrl-1 = <&dcan1_pins_sleep>;
|
||||
pinctrl-2 = <&dcan1_pins_default>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
|
114
sys/gnu/dts/arm/armada-385-linksys-shelby.dts
Normal file
114
sys/gnu/dts/arm/armada-385-linksys-shelby.dts
Normal file
@ -0,0 +1,114 @@
|
||||
/*
|
||||
* Device Tree file for the Linksys WRT1900ACS (Shelby)
|
||||
*
|
||||
* Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
|
||||
*
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-385-linksys.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Linksys WRT1900ACS";
|
||||
compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
|
||||
"marvell,armada380";
|
||||
|
||||
soc {
|
||||
internal-regs{
|
||||
i2c@11000 {
|
||||
|
||||
pca9635@68 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wan_amber@0 {
|
||||
label = "shelby:amber:wan";
|
||||
reg = <0x0>;
|
||||
};
|
||||
|
||||
wan_white@1 {
|
||||
label = "shelby:white:wan";
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
wlan_2g@2 {
|
||||
label = "shelby:white:wlan_2g";
|
||||
reg = <0x2>;
|
||||
};
|
||||
|
||||
wlan_5g@3 {
|
||||
label = "shelby:white:wlan_5g";
|
||||
reg = <0x3>;
|
||||
};
|
||||
|
||||
usb2@5 {
|
||||
label = "shelby:white:usb2";
|
||||
reg = <0x5>;
|
||||
};
|
||||
|
||||
usb3_1@6 {
|
||||
label = "shelby:white:usb3_1";
|
||||
reg = <0x6>;
|
||||
};
|
||||
|
||||
usb3_2@7 {
|
||||
label = "shelby:white:usb3_2";
|
||||
reg = <0x7>;
|
||||
};
|
||||
|
||||
wps_white@8 {
|
||||
label = "shelby:white:wps";
|
||||
reg = <0x8>;
|
||||
};
|
||||
|
||||
wps_amber@9 {
|
||||
label = "shelby:amber:wps";
|
||||
reg = <0x9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
power {
|
||||
label = "shelby:white:power";
|
||||
};
|
||||
|
||||
sata {
|
||||
label = "shelby:white:sata";
|
||||
};
|
||||
};
|
||||
};
|
@ -59,7 +59,8 @@
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
||||
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
||||
|
||||
internal-regs {
|
||||
i2c@11000 {
|
||||
@ -88,6 +89,9 @@
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-id";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <2>;
|
||||
bm,pool-short = <3>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
@ -97,6 +101,9 @@
|
||||
ethernet@34000 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <0>;
|
||||
bm,pool-short = <1>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
@ -159,6 +166,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
bm@c8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB part of the eSATA/USB 2.0 port */
|
||||
usb@58000 {
|
||||
status = "okay";
|
||||
@ -241,6 +252,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
bm-bppi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
@ -305,6 +320,7 @@
|
||||
sata {
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "disk-activity";
|
||||
};
|
||||
};
|
||||
|
||||
|
321
sys/gnu/dts/arm/armada-385-synology-ds116.dts
Normal file
321
sys/gnu/dts/arm/armada-385-synology-ds116.dts
Normal file
@ -0,0 +1,321 @@
|
||||
/*
|
||||
* Device Tree file for Synology DS116 NAS
|
||||
*
|
||||
* Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-385.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Synology DS116";
|
||||
compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>; /* 1 GB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
|
||||
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
|
||||
|
||||
internal-regs {
|
||||
i2c@11000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
eeprom@57 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x57>;
|
||||
};
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
/* A PIC16F1829 is connected to uart1 at 9600 bps,
|
||||
* and takes single-character orders :
|
||||
* "1" : power off // already handled by the poweroff node
|
||||
* "2" : short beep
|
||||
* "3" : long beep
|
||||
* "4" : turn the power LED ON
|
||||
* "5" : flash the power LED
|
||||
* "6" : turn the power LED OFF
|
||||
* "7" : turn the status LED OFF
|
||||
* "8" : turn the status LED ON
|
||||
* "9" : flash the status LED
|
||||
* "A" : flash the motherboard LED (D8)
|
||||
* "B" : turn the motherboard LED OFF
|
||||
* "C" : hard reset
|
||||
*/
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
poweroff@12100 {
|
||||
compatible = "synology,power-off";
|
||||
reg = <0x12100 0x100>;
|
||||
clocks = <&coreclk 0>;
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "sgmii";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
mdio@72004 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
phy0: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sata0_pins>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sata0: sata-port@0 {
|
||||
reg = <0>;
|
||||
target-supply = <®_5v_sata0>;
|
||||
};
|
||||
};
|
||||
|
||||
bm@c8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
usb-phy = <&usb3_0_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
usb-phy = <&usb3_1_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
bm-bppi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 17 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
gpio-fan,speed-map = < 0 0
|
||||
1500 1
|
||||
2500 2
|
||||
3000 3
|
||||
3400 4
|
||||
3700 5
|
||||
3900 6
|
||||
4000 7>;
|
||||
cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
/* The green part is on gpio0.20 which is also used by
|
||||
* sata0, and accesses to SATA disk 0 make it blink so it
|
||||
* doesn't need to be declared here.
|
||||
*/
|
||||
orange {
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
label = "ds116:orange:disk";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3_0_phy: usb3_0_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_0_vbus>;
|
||||
};
|
||||
|
||||
usb3_1_phy: usb3_1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <®_usb3_1_vbus>;
|
||||
};
|
||||
|
||||
reg_usb3_0_vbus: usb3-vbus0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb3-vbus0";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&xhci0_vbus_pins>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_usb3_1_vbus: usb3-vbus1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb3-vbus1";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&xhci1_vbus_pins>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_sata0: pwr-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pwr_en_sata0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_5v_sata0: v5-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "v5.0-sata0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
|
||||
reg_12v_sata0: v12-sata0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "v12.0-sata0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <®_sata0>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi-flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "macronix,mx25l6405d", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
/* Note: there is a redboot partition table despite u-boot
|
||||
* being used. The names presented here are the same as those
|
||||
* found in the FIS directory. There is also a small device
|
||||
* tree in the last 64kB of the RedBoot partition which is not
|
||||
* enumerated. The MAC address and the serial number are listed
|
||||
* in the "vendor" partition.
|
||||
*/
|
||||
partition@00000000 {
|
||||
label = "RedBoot";
|
||||
reg = <0x00000000 0x000f0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@000c0000 {
|
||||
label = "zImage";
|
||||
reg = <0x000f0000 0x002d0000>;
|
||||
};
|
||||
|
||||
partition@00390000 {
|
||||
label = "rd.gz";
|
||||
reg = <0x003c0000 0x00410000>;
|
||||
};
|
||||
|
||||
partition@007d0000 {
|
||||
label = "vendor";
|
||||
reg = <0x007d0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@007e0000 {
|
||||
label = "RedBoot config";
|
||||
reg = <0x007e0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@007f0000 {
|
||||
label = "FIS directory";
|
||||
reg = <0x007f0000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
/* use only one pin for UART1, as mpp20 is used by sata0 */
|
||||
uart1_pins: uart-pins-1 {
|
||||
marvell,pins = "mpp19";
|
||||
marvell,function = "ua1";
|
||||
};
|
||||
|
||||
xhci0_vbus_pins: xhci0_vbus_pins {
|
||||
marvell,pins = "mpp58";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
xhci1_vbus_pins: xhci1_vbus_pins {
|
||||
marvell,pins = "mpp59";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
@ -70,13 +70,7 @@
|
||||
};
|
||||
|
||||
soc {
|
||||
internal-regs {
|
||||
pinctrl@18000 {
|
||||
compatible = "marvell,mv88f6820-pinctrl";
|
||||
};
|
||||
};
|
||||
|
||||
pcie-controller {
|
||||
pciec: pcie-controller {
|
||||
compatible = "marvell,armada-370-pcie";
|
||||
status = "disabled";
|
||||
device_type = "pci";
|
||||
@ -106,7 +100,7 @@
|
||||
* configured in x4 by the bootloader, then
|
||||
* pcie@4,0 is not available.
|
||||
*/
|
||||
pcie@1,0 {
|
||||
pcie1: pcie@1,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
|
||||
reg = <0x0800 0 0 0 0>;
|
||||
@ -124,7 +118,7 @@
|
||||
};
|
||||
|
||||
/* x1 port */
|
||||
pcie@2,0 {
|
||||
pcie2: pcie@2,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
||||
reg = <0x1000 0 0 0 0>;
|
||||
@ -142,7 +136,7 @@
|
||||
};
|
||||
|
||||
/* x1 port */
|
||||
pcie@3,0 {
|
||||
pcie3: pcie@3,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
|
||||
reg = <0x1800 0 0 0 0>;
|
||||
@ -163,7 +157,7 @@
|
||||
* x1 port only available when pcie@1,0 is
|
||||
* configured as a x1 port
|
||||
*/
|
||||
pcie@4,0 {
|
||||
pcie4: pcie@4,0 {
|
||||
device_type = "pci";
|
||||
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
|
||||
reg = <0x2000 0 0 0 0>;
|
||||
@ -182,3 +176,7 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
compatible = "marvell,mv88f6820-pinctrl";
|
||||
};
|
||||
|
@ -186,25 +186,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "ref";
|
||||
};
|
||||
clearfog_dsa0_pins: clearfog-dsa0-pins {
|
||||
marvell,pins = "mpp23", "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
clearfog_spi1_cs_pins: spi1-cs-pins {
|
||||
marvell,pins = "mpp55";
|
||||
marvell,function = "spi1";
|
||||
};
|
||||
rear_button_pins: rear-button-pins {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
@ -268,6 +249,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "ref";
|
||||
};
|
||||
clearfog_dsa0_pins: clearfog-dsa0-pins {
|
||||
marvell,pins = "mpp23", "mpp41";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
clearfog_spi1_cs_pins: spi1-cs-pins {
|
||||
marvell,pins = "mpp55";
|
||||
marvell,function = "spi1";
|
||||
};
|
||||
rear_button_pins: rear-button-pins {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
/*
|
||||
* Add SPI CS pins for clearfog:
|
||||
|
@ -50,13 +50,8 @@
|
||||
model = "Marvell Armada 388 family SoC";
|
||||
compatible = "marvell,armada388", "marvell,armada385",
|
||||
"marvell,armada380";
|
||||
|
||||
soc {
|
||||
internal-regs {
|
||||
pinctrl@18000 {
|
||||
compatible = "marvell,mv88f6828-pinctrl";
|
||||
};
|
||||
|
||||
sata@e0000 {
|
||||
compatible = "marvell,armada-380-ahci";
|
||||
reg = <0xe0000 0x2000>;
|
||||
@ -68,3 +63,7 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
compatible = "marvell,mv88f6828-pinctrl";
|
||||
};
|
||||
|
@ -82,7 +82,7 @@
|
||||
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
|
||||
};
|
||||
|
||||
devbus-bootcs {
|
||||
devbus_bootcs: devbus-bootcs {
|
||||
compatible = "marvell,mvebu-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
|
||||
@ -92,7 +92,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
devbus-cs0 {
|
||||
devbus_cs0: devbus-cs0 {
|
||||
compatible = "marvell,mvebu-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
|
||||
@ -102,7 +102,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
devbus-cs1 {
|
||||
devbus_cs1: devbus-cs1 {
|
||||
compatible = "marvell,mvebu-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
|
||||
@ -112,7 +112,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
devbus-cs2 {
|
||||
devbus_cs2: devbus-cs2 {
|
||||
compatible = "marvell,mvebu-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
|
||||
@ -122,7 +122,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
devbus-cs3 {
|
||||
devbus_cs3: devbus-cs3 {
|
||||
compatible = "marvell,mvebu-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
|
||||
@ -339,7 +339,7 @@
|
||||
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
system-controller@18200 {
|
||||
systemc: system-controller@18200 {
|
||||
compatible = "marvell,armada-380-system-controller",
|
||||
"marvell,armada-370-xp-system-controller";
|
||||
reg = <0x18200 0x100>;
|
||||
@ -360,7 +360,8 @@
|
||||
|
||||
mbusc: mbus-controller@20000 {
|
||||
compatible = "marvell,mbus-controller";
|
||||
reg = <0x20000 0x100>, <0x20180 0x20>;
|
||||
reg = <0x20000 0x100>, <0x20180 0x20>,
|
||||
<0x20250 0x8>;
|
||||
};
|
||||
|
||||
mpic: interrupt-controller@20a00 {
|
||||
@ -373,7 +374,7 @@
|
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
timer@20300 {
|
||||
timer: timer@20300 {
|
||||
compatible = "marvell,armada-380-timer",
|
||||
"marvell,armada-xp-timer";
|
||||
reg = <0x20300 0x30>, <0x21040 0x30>;
|
||||
@ -387,14 +388,14 @@
|
||||
clock-names = "nbclk", "fixed";
|
||||
};
|
||||
|
||||
watchdog@20300 {
|
||||
watchdog: watchdog@20300 {
|
||||
compatible = "marvell,armada-380-wdt";
|
||||
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
|
||||
clocks = <&coreclk 2>, <&refclk>;
|
||||
clock-names = "nbclk", "fixed";
|
||||
};
|
||||
|
||||
cpurst@20800 {
|
||||
cpurst: cpurst@20800 {
|
||||
compatible = "marvell,armada-370-cpu-reset";
|
||||
reg = <0x20800 0x10>;
|
||||
};
|
||||
@ -404,12 +405,12 @@
|
||||
reg = <0x20d20 0x6c>;
|
||||
};
|
||||
|
||||
coherency-fabric@21010 {
|
||||
coherencyfab: coherency-fabric@21010 {
|
||||
compatible = "marvell,armada-380-coherency-fabric";
|
||||
reg = <0x21010 0x1c>;
|
||||
};
|
||||
|
||||
pmsu@22000 {
|
||||
pmsu: pmsu@22000 {
|
||||
compatible = "marvell,armada-380-pmsu";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
@ -451,7 +452,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb@58000 {
|
||||
usb0: usb@58000 {
|
||||
compatible = "marvell,orion-ehci";
|
||||
reg = <0x58000 0x500>;
|
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -459,7 +460,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor@60800 {
|
||||
xor0: xor@60800 {
|
||||
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
||||
reg = <0x60800 0x100
|
||||
0x60a00 0x100>;
|
||||
@ -479,7 +480,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
xor@60900 {
|
||||
xor1: xor@60900 {
|
||||
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
|
||||
reg = <0x60900 0x100
|
||||
0x60b00 0x100>;
|
||||
@ -507,7 +508,7 @@
|
||||
clocks = <&gateclk 4>;
|
||||
};
|
||||
|
||||
crypto@90000 {
|
||||
cesa: crypto@90000 {
|
||||
compatible = "marvell,armada-38x-crypto";
|
||||
reg = <0x90000 0x10000>;
|
||||
reg-names = "regs";
|
||||
@ -522,14 +523,14 @@
|
||||
marvell,crypto-sram-size = <0x800>;
|
||||
};
|
||||
|
||||
rtc@a3800 {
|
||||
rtc: rtc@a3800 {
|
||||
compatible = "marvell,armada-380-rtc";
|
||||
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
|
||||
reg-names = "rtc", "rtc-soc";
|
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
ahci0: sata@a8000 {
|
||||
compatible = "marvell,armada-380-ahci";
|
||||
reg = <0xa8000 0x2000>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -545,7 +546,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sata@e0000 {
|
||||
ahci1: sata@e0000 {
|
||||
compatible = "marvell,armada-380-ahci";
|
||||
reg = <0xe0000 0x2000>;
|
||||
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -561,13 +562,13 @@
|
||||
clock-output-names = "nand";
|
||||
};
|
||||
|
||||
thermal@e8078 {
|
||||
thermal: thermal@e8078 {
|
||||
compatible = "marvell,armada380-thermal";
|
||||
reg = <0xe4078 0x4>, <0xe4074 0x4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
nand: flash@d0000 {
|
||||
compatible = "marvell,armada370-nand";
|
||||
reg = <0xd0000 0x54>;
|
||||
#address-cells = <1>;
|
||||
@ -577,7 +578,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@d8000 {
|
||||
sdhci: sdhci@d8000 {
|
||||
compatible = "marvell,armada-380-sdhci";
|
||||
reg-names = "sdhci", "mbus", "conf-sdio3";
|
||||
reg = <0xd8000 0x1000>,
|
||||
@ -589,7 +590,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
usb3_0: usb3@f0000 {
|
||||
compatible = "marvell,armada-380-xhci";
|
||||
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -597,7 +598,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
usb3_1: usb3@f8000 {
|
||||
compatible = "marvell,armada-380-xhci";
|
||||
reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
|
||||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
@ -45,11 +45,14 @@
|
||||
* common to all Armada XP SoCs.
|
||||
*/
|
||||
|
||||
#include "armada-xp.dtsi"
|
||||
#include "armada-370-xp.dtsi"
|
||||
|
||||
/ {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
model = "Marvell 98DX3236 SoC";
|
||||
compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
|
||||
|
||||
aliases {
|
||||
gpio0 = &gpio0;
|
||||
@ -72,12 +75,19 @@
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "marvell,armadaxp-mbus", "simple-bus";
|
||||
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
|
||||
MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
|
||||
MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
|
||||
|
||||
bootrom {
|
||||
compatible = "marvell,bootrom";
|
||||
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* 98DX3236 has 1 x1 PCIe unit Gen2.0
|
||||
*/
|
||||
@ -95,8 +105,7 @@
|
||||
ranges =
|
||||
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
||||
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
||||
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
|
||||
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
|
||||
|
||||
pcie1: pcie@1,0 {
|
||||
device_type = "pci";
|
||||
@ -117,48 +126,18 @@
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
coreclk: mvebu-sar@18230 {
|
||||
compatible = "marvell,mv98dx3236-core-clock";
|
||||
sdramc@1400 {
|
||||
compatible = "marvell,armada-xp-sdram-controller";
|
||||
reg = <0x1400 0x500>;
|
||||
};
|
||||
|
||||
cpuclk: clock-complex@18700 {
|
||||
compatible = "marvell,mv98dx3236-cpu-clock";
|
||||
};
|
||||
|
||||
corediv-clock@18740 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor@60900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
crypto@90000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor@f0900 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor@f0800 {
|
||||
compatible = "marvell,orion-xor";
|
||||
reg = <0xf0800 0x100
|
||||
0xf0a00 0x100>;
|
||||
clocks = <&gateclk 22>;
|
||||
status = "okay";
|
||||
|
||||
xor10 {
|
||||
interrupts = <51>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
};
|
||||
xor11 {
|
||||
interrupts = <52>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
dmacap,memset;
|
||||
};
|
||||
L2: l2-cache@8000 {
|
||||
compatible = "marvell,aurora-system-cache";
|
||||
reg = <0x08000 0x1000>;
|
||||
cache-id-part = <0x100>;
|
||||
cache-level = <2>;
|
||||
cache-unified;
|
||||
wt-override;
|
||||
};
|
||||
|
||||
gpio0: gpio@18100 {
|
||||
@ -190,16 +169,99 @@
|
||||
interrupts = <87>;
|
||||
};
|
||||
|
||||
systemc: system-controller@18200 {
|
||||
compatible = "marvell,armada-370-xp-system-controller";
|
||||
reg = <0x18200 0x500>;
|
||||
};
|
||||
|
||||
gateclk: clock-gating-control@18220 {
|
||||
compatible = "marvell,mv98dx3236-gating-clock";
|
||||
reg = <0x18220 0x4>;
|
||||
clocks = <&coreclk 0>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
cpuclk: clock-complex@18700 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "marvell,mv98dx3236-cpu-clock";
|
||||
reg = <0x18700 0x24>, <0x1c054 0x10>;
|
||||
clocks = <&coreclk 1>;
|
||||
};
|
||||
|
||||
corediv-clock@18740 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cpu-config@21000 {
|
||||
compatible = "marvell,armada-xp-cpu-config";
|
||||
reg = <0x21000 0x8>;
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
compatible = "marvell,armada-xp-neta";
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
compatible = "marvell,armada-xp-neta";
|
||||
};
|
||||
|
||||
xor1: xor@f0800 {
|
||||
compatible = "marvell,orion-xor";
|
||||
reg = <0xf0800 0x100
|
||||
0xf0a00 0x100>;
|
||||
clocks = <&gateclk 22>;
|
||||
status = "okay";
|
||||
|
||||
xor10 {
|
||||
interrupts = <51>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
};
|
||||
xor11 {
|
||||
interrupts = <52>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
dmacap,memset;
|
||||
};
|
||||
};
|
||||
|
||||
nand: nand@d0000 {
|
||||
clocks = <&dfx_coredivclk 0>;
|
||||
};
|
||||
|
||||
xor0: xor@f0900 {
|
||||
compatible = "marvell,orion-xor";
|
||||
reg = <0xF0900 0x100
|
||||
0xF0B00 0x100>;
|
||||
clocks = <&gateclk 28>;
|
||||
status = "okay";
|
||||
|
||||
xor00 {
|
||||
interrupts = <94>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
};
|
||||
xor01 {
|
||||
interrupts = <95>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
dmacap,memset;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dfxr: dfx-registers@ac000000 {
|
||||
compatible = "simple-bus";
|
||||
dfx: dfx-server@ac000000 {
|
||||
compatible = "marvell,dfx-server", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
|
||||
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
|
||||
|
||||
coreclk: mvebu-sar@f8204 {
|
||||
compatible = "marvell,mv98dx3236-core-clock";
|
||||
reg = <0xf8204 0x4>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
dfx_coredivclk: corediv-clock@f8268 {
|
||||
compatible = "marvell,mv98dx3236-corediv-clock";
|
||||
@ -208,11 +270,6 @@
|
||||
clocks = <&mainpll>;
|
||||
clock-output-names = "nand";
|
||||
};
|
||||
|
||||
dfx: dfx@0 {
|
||||
compatible = "marvell,dfx-server";
|
||||
reg = <0 0x100000>;
|
||||
};
|
||||
};
|
||||
|
||||
switch: switch@a8000000 {
|
||||
@ -229,6 +286,53 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
clocks {
|
||||
/* 25 MHz reference crystal */
|
||||
refclk: oscillator {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
||||
reg = <0x11000 0x100>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
|
||||
reg = <0x11100 0x100>;
|
||||
};
|
||||
|
||||
&mpic {
|
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
||||
};
|
||||
|
||||
&timer {
|
||||
compatible = "marvell,armada-xp-timer";
|
||||
clocks = <&coreclk 2>, <&refclk>;
|
||||
clock-names = "nbclk", "fixed";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
compatible = "marvell,armada-xp-wdt";
|
||||
clocks = <&coreclk 2>, <&refclk>;
|
||||
clock-names = "nbclk", "fixed";
|
||||
};
|
||||
|
||||
&cpurst {
|
||||
reg = <0x20800 0x20>;
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
clocks = <&gateclk 18>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
clocks = <&gateclk 19>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
@ -241,14 +345,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
|
||||
pinctrl-0 = <&spi0_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&crypto_sram0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&crypto_sram1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
@ -49,7 +49,7 @@
|
||||
|
||||
/ {
|
||||
model = "Marvell 98DX3336 SoC";
|
||||
compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
|
||||
|
||||
cpus {
|
||||
cpu@1 {
|
||||
|
@ -49,7 +49,7 @@
|
||||
|
||||
/ {
|
||||
model = "Marvell 98DX4251 SoC";
|
||||
compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
|
||||
|
||||
cpus {
|
||||
cpu@1 {
|
||||
|
@ -58,7 +58,7 @@
|
||||
|
||||
/ {
|
||||
model = "Marvell Bobcat2 Evaluation Board";
|
||||
compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk";
|
||||
|
@ -58,7 +58,7 @@
|
||||
|
||||
/ {
|
||||
model = "DB-XC3-24G4XG";
|
||||
compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
|
||||
compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 earlyprintk";
|
||||
|
@ -71,7 +71,8 @@
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
|
||||
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
|
||||
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
|
||||
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
|
||||
|
||||
internal-regs {
|
||||
|
||||
@ -95,6 +96,9 @@
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-id";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <0>;
|
||||
bm,pool-short = <1>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
@ -106,6 +110,9 @@
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-mode = "rgmii-id";
|
||||
buffer-manager = <&bm>;
|
||||
bm,pool-long = <2>;
|
||||
bm,pool-short = <3>;
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
@ -156,6 +163,7 @@
|
||||
esata@4 {
|
||||
label = "mamba:white:esata";
|
||||
reg = <0x4>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
};
|
||||
|
||||
usb2@5 {
|
||||
@ -185,6 +193,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
bm@c8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
@ -258,6 +270,10 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
bm-bppi {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
|
@ -20,6 +20,28 @@
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -31,6 +31,24 @@
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -31,6 +31,42 @@
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
/* Rear RS-232 connector */
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default
|
||||
&pinctrl_nrts1_default
|
||||
&pinctrl_ndtr1_default
|
||||
&pinctrl_ndsr1_default
|
||||
&pinctrl_ncts1_default
|
||||
&pinctrl_ndcd1_default
|
||||
&pinctrl_nri1_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -18,21 +18,41 @@
|
||||
};
|
||||
};
|
||||
|
||||
clocks {
|
||||
clk_clkin: clk_clkin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ahb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
fmc: flash-controller@1e620000 {
|
||||
reg = < 0x1e620000 0x94
|
||||
0x20000000 0x02000000 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "aspeed,ast2400-fmc";
|
||||
status = "disabled";
|
||||
interrupts = <19>;
|
||||
flash@0 {
|
||||
reg = < 0 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
spi: flash-controller@1e630000 {
|
||||
reg = < 0x1e630000 0x18
|
||||
0x30000000 0x02000000 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "aspeed,ast2400-spi";
|
||||
status = "disabled";
|
||||
flash@0 {
|
||||
reg = < 0 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
vic: interrupt-controller@1e6c0080 {
|
||||
compatible = "aspeed,ast2400-vic";
|
||||
interrupt-controller;
|
||||
@ -42,18 +62,16 @@
|
||||
};
|
||||
|
||||
mac0: ethernet@1e660000 {
|
||||
compatible = "faraday,ftgmac100";
|
||||
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e660000 0x180>;
|
||||
interrupts = <2>;
|
||||
no-hw-checksum;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac1: ethernet@1e680000 {
|
||||
compatible = "faraday,ftgmac100";
|
||||
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e680000 0x180>;
|
||||
interrupts = <3>;
|
||||
no-hw-checksum;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -63,16 +81,48 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clk_hpll: clk_hpll@1e6e2070 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-hpll-clock";
|
||||
reg = <0x1e6e2070 0x4>;
|
||||
clocks = <&clk_clkin>;
|
||||
};
|
||||
|
||||
syscon: syscon@1e6e2000 {
|
||||
compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk_clkin: clk_clkin {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
clk_hpll: clk_hpll@70 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-hpll-clock", "fixed-clock";
|
||||
reg = <0x70>;
|
||||
clocks = <&clk_clkin>;
|
||||
clock-frequency = <384000000>;
|
||||
};
|
||||
|
||||
clk_ahb: clk_ahb@70 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-ahb-clock", "fixed-clock";
|
||||
reg = <0x70>;
|
||||
clocks = <&clk_hpll>;
|
||||
clock-frequency = <192000000>;
|
||||
};
|
||||
|
||||
clk_apb: clk_apb@08 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-apb-clock", "fixed-clock";
|
||||
reg = <0x08>;
|
||||
clocks = <&clk_hpll>;
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
||||
clk_uart: clk_uart@2c{
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-uart-clock", "fixed-clock";
|
||||
reg = <0x2c>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g4-pinctrl";
|
||||
@ -820,19 +870,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
clk_apb: clk_apb@1e6e2008 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g4-apb-clock";
|
||||
reg = <0x1e6e2008 0x4>;
|
||||
clocks = <&clk_hpll>;
|
||||
};
|
||||
|
||||
clk_uart: clk_uart@1e6e2008 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,uart-clock";
|
||||
reg = <0x1e6e202c 0x4>;
|
||||
};
|
||||
|
||||
sram@1e720000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x1e720000 0x8000>; // 32K
|
||||
@ -859,13 +896,13 @@
|
||||
};
|
||||
|
||||
wdt1: wdt@1e785000 {
|
||||
compatible = "aspeed,wdt";
|
||||
compatible = "aspeed,ast2400-wdt";
|
||||
reg = <0x1e785000 0x1c>;
|
||||
interrupts = <27>;
|
||||
};
|
||||
|
||||
wdt2: wdt@1e785020 {
|
||||
compatible = "aspeed,wdt";
|
||||
compatible = "aspeed,ast2400-wdt";
|
||||
reg = <0x1e785020 0x1c>;
|
||||
interrupts = <27>;
|
||||
clocks = <&clk_apb>;
|
||||
@ -932,6 +969,14 @@
|
||||
no-loopback-test;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc: adc@1e6e9000 {
|
||||
compatible = "aspeed,ast2400-adc";
|
||||
reg = <0x1e6e9000 0xb0>;
|
||||
clocks = <&clk_apb>;
|
||||
#io-channel-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -24,6 +24,69 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
fmc: flash-controller@1e620000 {
|
||||
reg = < 0x1e620000 0xc4
|
||||
0x20000000 0x10000000 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "aspeed,ast2500-fmc";
|
||||
status = "disabled";
|
||||
interrupts = <19>;
|
||||
flash@0 {
|
||||
reg = < 0 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@1 {
|
||||
reg = < 1 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@2 {
|
||||
reg = < 2 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
spi1: flash-controller@1e630000 {
|
||||
reg = < 0x1e630000 0xc4
|
||||
0x30000000 0x08000000 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "aspeed,ast2500-spi";
|
||||
status = "disabled";
|
||||
flash@0 {
|
||||
reg = < 0 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@1 {
|
||||
reg = < 1 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
spi2: flash-controller@1e631000 {
|
||||
reg = < 0x1e631000 0xc4
|
||||
0x38000000 0x08000000 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "aspeed,ast2500-spi";
|
||||
status = "disabled";
|
||||
flash@0 {
|
||||
reg = < 0 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@1 {
|
||||
reg = < 1 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
vic: interrupt-controller@1e6c0080 {
|
||||
compatible = "aspeed,ast2400-vic";
|
||||
interrupt-controller;
|
||||
@ -33,18 +96,16 @@
|
||||
};
|
||||
|
||||
mac0: ethernet@1e660000 {
|
||||
compatible = "faraday,ftgmac100";
|
||||
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e660000 0x180>;
|
||||
interrupts = <2>;
|
||||
no-hw-checksum;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mac1: ethernet@1e680000 {
|
||||
compatible = "faraday,ftgmac100";
|
||||
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e680000 0x180>;
|
||||
interrupts = <3>;
|
||||
no-hw-checksum;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -54,15 +115,49 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clk_clkin: clk_clkin@1e6e2070 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-clkin-clock";
|
||||
reg = <0x1e6e2070 0x04>;
|
||||
};
|
||||
|
||||
syscon: syscon@1e6e2000 {
|
||||
compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk_clkin: clk_clkin@70 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-clkin-clock", "fixed-clock";
|
||||
reg = <0x70>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
clk_hpll: clk_hpll@24 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-hpll-clock", "fixed-clock";
|
||||
reg = <0x24>;
|
||||
clocks = <&clk_clkin>;
|
||||
clock-frequency = <792000000>;
|
||||
};
|
||||
|
||||
clk_ahb: clk_ahb@70 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-ahb-clock", "fixed-clock";
|
||||
reg = <0x70>;
|
||||
clocks = <&clk_hpll>;
|
||||
clock-frequency = <198000000>;
|
||||
};
|
||||
|
||||
clk_apb: clk_apb@08 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-apb-clock", "fixed-clock";
|
||||
reg = <0x08>;
|
||||
clocks = <&clk_hpll>;
|
||||
clock-frequency = <24750000>;
|
||||
};
|
||||
|
||||
clk_uart: clk_uart@2c {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,uart-clock", "fixed-clock";
|
||||
reg = <0x2c>;
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g5-pinctrl";
|
||||
@ -287,7 +382,6 @@
|
||||
function = "LAD0";
|
||||
groups = "LAD0";
|
||||
};
|
||||
|
||||
pinctrl_lad1_default: lad1_default {
|
||||
function = "LAD1";
|
||||
groups = "LAD1";
|
||||
@ -874,33 +968,7 @@
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
clk_hpll: clk_hpll@1e6e2024 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-hpll-clock";
|
||||
reg = <0x1e6e2024 0x4>;
|
||||
clocks = <&clk_clkin>;
|
||||
};
|
||||
|
||||
clk_ahb: clk_ahb@1e6e2070 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-ahb-clock";
|
||||
reg = <0x1e6e2070 0x4>;
|
||||
clocks = <&clk_hpll>;
|
||||
};
|
||||
|
||||
clk_apb: clk_apb@1e6e2008 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,g5-apb-clock";
|
||||
reg = <0x1e6e2008 0x4>;
|
||||
clocks = <&clk_hpll>;
|
||||
};
|
||||
|
||||
clk_uart: clk_uart@1e6e2008 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "aspeed,uart-clock";
|
||||
reg = <0x1e6e202c 0x4>;
|
||||
};
|
||||
|
||||
gfx: display@1e6e6000 {
|
||||
@ -936,21 +1004,21 @@
|
||||
|
||||
|
||||
wdt1: wdt@1e785000 {
|
||||
compatible = "aspeed,wdt";
|
||||
reg = <0x1e785000 0x1c>;
|
||||
compatible = "aspeed,ast2500-wdt";
|
||||
reg = <0x1e785000 0x20>;
|
||||
interrupts = <27>;
|
||||
};
|
||||
|
||||
wdt2: wdt@1e785020 {
|
||||
compatible = "aspeed,wdt";
|
||||
reg = <0x1e785020 0x1c>;
|
||||
compatible = "aspeed,ast2500-wdt";
|
||||
reg = <0x1e785020 0x20>;
|
||||
interrupts = <27>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt3: wdt@1e785040 {
|
||||
compatible = "aspeed,wdt";
|
||||
reg = <0x1e785074 0x1c>;
|
||||
compatible = "aspeed,ast2500-wdt";
|
||||
reg = <0x1e785040 0x20>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -1044,6 +1112,14 @@
|
||||
no-loopback-test;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc: adc@1e6e9000 {
|
||||
compatible = "aspeed,ast2500-adc";
|
||||
reg = <0x1e6e9000 0xb0>;
|
||||
clocks = <&clk_apb>;
|
||||
#io-channel-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -246,6 +246,7 @@
|
||||
|
||||
shdwc@f8048010 {
|
||||
atmel,shdwc-debouncer = <976>;
|
||||
atmel,wakeup-rtc-timer;
|
||||
|
||||
input@0 {
|
||||
reg = <0>;
|
||||
|
@ -162,9 +162,10 @@
|
||||
};
|
||||
|
||||
adc0: adc@f8018000 {
|
||||
atmel,adc-vref = <3300>;
|
||||
atmel,adc-channels-used = <0xfe>;
|
||||
pinctrl-0 = <
|
||||
&pinctrl_adc0_adtrg
|
||||
&pinctrl_adc0_ad0
|
||||
&pinctrl_adc0_ad1
|
||||
&pinctrl_adc0_ad2
|
||||
&pinctrl_adc0_ad3
|
||||
@ -172,8 +173,6 @@
|
||||
&pinctrl_adc0_ad5
|
||||
&pinctrl_adc0_ad6
|
||||
&pinctrl_adc0_ad7
|
||||
&pinctrl_adc0_ad8
|
||||
&pinctrl_adc0_ad9
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -86,16 +86,43 @@
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
|
||||
envelope-detector {
|
||||
env_det: envelope-detector {
|
||||
compatible = "axentia,tse850-envelope-detector";
|
||||
io-channels = <&dac 0>;
|
||||
io-channel-names = "dac";
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
interrupt-parent = <&pioA>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "comp";
|
||||
};
|
||||
|
||||
mux: mux-controller {
|
||||
compatible = "gpio-mux";
|
||||
#mux-control-cells = <0>;
|
||||
|
||||
mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
|
||||
<&pioA 1 GPIO_ACTIVE_HIGH>,
|
||||
<&pioA 2 GPIO_ACTIVE_HIGH>;
|
||||
idle-state = <0>;
|
||||
};
|
||||
|
||||
envelope-detector-mux {
|
||||
compatible = "io-channel-mux";
|
||||
io-channels = <&env_det 0>;
|
||||
io-channel-names = "parent";
|
||||
|
||||
mux-controls = <&mux>;
|
||||
|
||||
channels = "", "",
|
||||
"sync-1",
|
||||
"in",
|
||||
"out",
|
||||
"sync-2",
|
||||
"sys-reg",
|
||||
"ana-reg";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
|
@ -263,7 +263,7 @@
|
||||
};
|
||||
|
||||
matrix: matrix@ffffee00 {
|
||||
compatible = "atmel,at91sam9260-bus-matrix", "syscon";
|
||||
compatible = "atmel,at91sam9261-matrix", "syscon";
|
||||
reg = <0xffffee00 0x200>;
|
||||
};
|
||||
|
||||
|
@ -116,7 +116,7 @@
|
||||
};
|
||||
|
||||
spi0: spi@f0000000 {
|
||||
status = "okay";
|
||||
status = "disabled"; /* conflicts with mmc1 */
|
||||
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
|
||||
m25p80@0 {
|
||||
compatible = "atmel,at25df321a";
|
||||
|
@ -53,6 +53,11 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
ac_power_supply: ac-power-supply {
|
||||
compatible = "x-powers,axp202-ac-power-supply";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
axp_gpio: gpio {
|
||||
compatible = "x-powers,axp209-gpio";
|
||||
gpio-controller;
|
||||
|
@ -52,6 +52,11 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
ac_power_supply: ac-power-supply {
|
||||
compatible = "x-powers,axp221-ac-power-supply";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
regulators {
|
||||
/* Default work frequency for buck regulators */
|
||||
x-powers,dcdc-freq = <3000>;
|
||||
|
@ -205,7 +205,7 @@
|
||||
status = "disabled";
|
||||
|
||||
msi-parent = <&msi0>;
|
||||
msi0: msi@18012000 {
|
||||
msi0: msi-controller {
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
@ -240,7 +240,7 @@
|
||||
status = "disabled";
|
||||
|
||||
msi-parent = <&msi1>;
|
||||
msi1: msi@18013000 {
|
||||
msi1: msi-controller {
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
|
@ -245,6 +245,15 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mailbox: mailbox@25000 {
|
||||
compatible = "brcm,iproc-fa2-mbox";
|
||||
reg = <0x25000 0x445>;
|
||||
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#mbox-cells = <1>;
|
||||
brcm,rx-status-len = <32>;
|
||||
brcm,use-bcm-hdr;
|
||||
};
|
||||
|
||||
nand: nand@26000 {
|
||||
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
|
||||
reg = <0x026000 0x600>,
|
||||
@ -288,6 +297,12 @@
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
crypto@2f000 {
|
||||
compatible = "brcm,spum-nsp-crypto";
|
||||
reg = <0x2f000 0x900>;
|
||||
mboxes = <&mailbox 0>;
|
||||
};
|
||||
|
||||
gpiob: gpio@30000 {
|
||||
compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
|
||||
reg = <0x30000 0x50>;
|
||||
@ -306,6 +321,20 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci0: usb@2a000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = <0x2a000 0x100>;
|
||||
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ohci0: usb@2b000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = <0x2b000 0x100>;
|
||||
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rng: rng@33000 {
|
||||
compatible = "brcm,bcm-nsp-rng";
|
||||
reg = <0x33000 0x14>;
|
||||
@ -347,6 +376,7 @@
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
watchdog@39000 {
|
||||
@ -450,7 +480,7 @@
|
||||
status = "disabled";
|
||||
|
||||
msi-parent = <&msi0>;
|
||||
msi0: msi@18012000 {
|
||||
msi0: msi-controller {
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
@ -486,7 +516,7 @@
|
||||
status = "disabled";
|
||||
|
||||
msi-parent = <&msi1>;
|
||||
msi1: msi@18013000 {
|
||||
msi1: msi-controller {
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
@ -522,7 +552,7 @@
|
||||
status = "disabled";
|
||||
|
||||
msi-parent = <&msi2>;
|
||||
msi2: msi@18014000 {
|
||||
msi2: msi-controller {
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
|
@ -69,6 +69,12 @@
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
@ -92,3 +98,11 @@
|
||||
power-domains = <&power RPI_POWER_DOMAIN_VEC>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
|
||||
};
|
||||
|
||||
&dsi1 {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
|
||||
};
|
||||
|
@ -1,6 +1,6 @@
|
||||
/ {
|
||||
aliases {
|
||||
ethernet = ðernet;
|
||||
ethernet0 = ðernet;
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -1,6 +1,6 @@
|
||||
/ {
|
||||
aliases {
|
||||
ethernet = ðernet;
|
||||
ethernet0 = ðernet;
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -3,6 +3,11 @@
|
||||
#include <dt-bindings/clock/bcm2835-aux.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/* firmware-provided startup stubs live here, where the secondary CPUs are
|
||||
* spinning.
|
||||
*/
|
||||
/memreserve/ 0x00000000 0x00001000;
|
||||
|
||||
/* This include file covers the common peripherals and configuration between
|
||||
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to
|
||||
* bcm2835.dtsi and bcm2836.dtsi.
|
||||
@ -93,10 +98,13 @@
|
||||
#clock-cells = <1>;
|
||||
reg = <0x7e101000 0x2000>;
|
||||
|
||||
/* CPRMAN derives everything from the platform's
|
||||
* oscillator.
|
||||
/* CPRMAN derives almost everything from the
|
||||
* platform's oscillator. However, the DSI
|
||||
* pixel clocks come from the DSI analog PHY.
|
||||
*/
|
||||
clocks = <&clk_osc>;
|
||||
clocks = <&clk_osc>,
|
||||
<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
|
||||
<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
|
||||
};
|
||||
|
||||
rng@7e104000 {
|
||||
@ -195,8 +203,8 @@
|
||||
brcm,pins = <0 1>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
};
|
||||
i2c0_gpio32: i2c0_gpio32 {
|
||||
brcm,pins = <32 34>;
|
||||
i2c0_gpio28: i2c0_gpio28 {
|
||||
brcm,pins = <28 29>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
};
|
||||
i2c0_gpio44: i2c0_gpio44 {
|
||||
@ -292,20 +300,28 @@
|
||||
/* Separate from the uart0_gpio14 group
|
||||
* because it conflicts with spi1_gpio16, and
|
||||
* people often run uart0 on the two pins
|
||||
* without flow contrl.
|
||||
* without flow control.
|
||||
*/
|
||||
uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
|
||||
brcm,pins = <16 17>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
uart0_gpio30: uart0_gpio30 {
|
||||
uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
|
||||
brcm,pins = <30 31>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
|
||||
uart0_gpio32: uart0_gpio32 {
|
||||
brcm,pins = <32 33>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
uart0_gpio36: uart0_gpio36 {
|
||||
brcm,pins = <36 37>;
|
||||
brcm,function = <BCM2835_FSEL_ALT2>;
|
||||
};
|
||||
uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
|
||||
brcm,pins = <38 39>;
|
||||
brcm,function = <BCM2835_FSEL_ALT2>;
|
||||
};
|
||||
|
||||
uart1_gpio14: uart1_gpio14 {
|
||||
brcm,pins = <14 15>;
|
||||
@ -323,10 +339,6 @@
|
||||
brcm,pins = <30 31>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
};
|
||||
uart1_gpio36: uart1_gpio36 {
|
||||
brcm,pins = <36 37 38 39>;
|
||||
brcm,function = <BCM2835_FSEL_ALT2>;
|
||||
};
|
||||
uart1_gpio40: uart1_gpio40 {
|
||||
brcm,pins = <40 41>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
@ -347,6 +359,16 @@
|
||||
arm,primecell-periphid = <0x00241011>;
|
||||
};
|
||||
|
||||
sdhost: mmc@7e202000 {
|
||||
compatible = "brcm,bcm2835-sdhost";
|
||||
reg = <0x7e202000 0x100>;
|
||||
interrupts = <2 24>;
|
||||
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
||||
dmas = <&dma 13>;
|
||||
dma-names = "rx-tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2s: i2s@7e203000 {
|
||||
compatible = "brcm,bcm2835-i2s";
|
||||
reg = <0x7e203000 0x20>,
|
||||
@ -390,6 +412,25 @@
|
||||
interrupts = <2 14>; /* pwa1 */
|
||||
};
|
||||
|
||||
dsi0: dsi@7e209000 {
|
||||
compatible = "brcm,bcm2835-dsi0";
|
||||
reg = <0x7e209000 0x78>;
|
||||
interrupts = <2 4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
clocks = <&clocks BCM2835_PLLA_DSI0>,
|
||||
<&clocks BCM2835_CLOCK_DSI0E>,
|
||||
<&clocks BCM2835_CLOCK_DSI0P>;
|
||||
clock-names = "phy", "escape", "pixel";
|
||||
|
||||
clock-output-names = "dsi0_byte",
|
||||
"dsi0_ddr2",
|
||||
"dsi0_ddr";
|
||||
|
||||
};
|
||||
|
||||
thermal: thermal@7e212000 {
|
||||
compatible = "brcm,bcm2835-thermal";
|
||||
reg = <0x7e212000 0x8>;
|
||||
@ -456,6 +497,26 @@
|
||||
interrupts = <2 1>;
|
||||
};
|
||||
|
||||
dsi1: dsi@7e700000 {
|
||||
compatible = "brcm,bcm2835-dsi1";
|
||||
reg = <0x7e700000 0x8c>;
|
||||
interrupts = <2 12>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
clocks = <&clocks BCM2835_PLLD_DSI1>,
|
||||
<&clocks BCM2835_CLOCK_DSI1E>,
|
||||
<&clocks BCM2835_CLOCK_DSI1P>;
|
||||
clock-names = "phy", "escape", "pixel";
|
||||
|
||||
clock-output-names = "dsi1_byte",
|
||||
"dsi1_ddr2",
|
||||
"dsi1_ddr";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c@7e804000 {
|
||||
compatible = "brcm,bcm2835-i2c";
|
||||
reg = <0x7e804000 0x1000>;
|
||||
@ -499,6 +560,8 @@
|
||||
clocks = <&clocks BCM2835_PLLH_PIX>,
|
||||
<&clocks BCM2835_CLOCK_HSM>;
|
||||
clock-names = "pixel", "hdmi";
|
||||
dmas = <&dma 17>;
|
||||
dma-names = "audio-rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -31,19 +41,16 @@
|
||||
usb3 {
|
||||
label = "bcm53xx:blue:usb3";
|
||||
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "bcm53xx:blue:wan";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "bcm53xx:blue:lan";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power {
|
||||
@ -61,14 +68,12 @@
|
||||
2ghz {
|
||||
label = "bcm53xx:blue:2ghz";
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:blue:usb2";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -31,7 +41,6 @@
|
||||
usb2 {
|
||||
label = "bcm53xx:blue:usb2";
|
||||
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power {
|
||||
@ -49,7 +58,6 @@
|
||||
usb3 {
|
||||
label = "bcm53xx:blue:usb3";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -52,13 +52,11 @@
|
||||
usb {
|
||||
label = "bcm53xx:blue:usb";
|
||||
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power0 {
|
||||
label = "bcm53xx:red:power";
|
||||
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power1 {
|
||||
@ -76,7 +74,6 @@
|
||||
router1 {
|
||||
label = "bcm53xx:amber:router";
|
||||
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan {
|
||||
@ -88,13 +85,11 @@
|
||||
wireless0 {
|
||||
label = "bcm53xx:blue:wireless";
|
||||
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless1 {
|
||||
label = "bcm53xx:amber:wireless";
|
||||
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
41
sys/gnu/dts/arm/bcm4708-linksys-ea6300-v1.dts
Normal file
41
sys/gnu/dts/arm/bcm4708-linksys-ea6300-v1.dts
Normal file
@ -0,0 +1,41 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm4708.dtsi"
|
||||
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "linksys,ea6300-v1", "brcm,bcm4708";
|
||||
model = "Linksys EA6300 V1";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wps {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
restart {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
@ -43,19 +43,16 @@
|
||||
power1 {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "bcm53xx:blue:usb";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless {
|
||||
label = "bcm53xx:blue:wireless";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -37,7 +47,6 @@
|
||||
power0 {
|
||||
label = "bcm53xx:green:power";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power1 {
|
||||
@ -49,13 +58,11 @@
|
||||
usb {
|
||||
label = "bcm53xx:blue:usb";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless {
|
||||
label = "bcm53xx:blue:wireless";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -37,61 +37,51 @@
|
||||
power-amber {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:white:usb2";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3-white {
|
||||
label = "bcm53xx:white:usb3";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3-green {
|
||||
label = "bcm53xx:green:usb3";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:white:wps";
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
status-red {
|
||||
label = "bcm53xx:red:status";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
status-green {
|
||||
label = "bcm53xx:green:status";
|
||||
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
status-blue {
|
||||
label = "bcm53xx:blue:status";
|
||||
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-white {
|
||||
label = "bcm53xx:white:wan";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-red {
|
||||
label = "bcm53xx:red:wan";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -12,6 +12,14 @@
|
||||
/ {
|
||||
compatible = "brcm,bcm4708";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -37,7 +47,6 @@
|
||||
usb2 {
|
||||
label = "bcm53xx:blue:usb2";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan {
|
||||
@ -55,7 +64,6 @@
|
||||
usb3 {
|
||||
label = "bcm53xx:blue:usb3";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -58,7 +68,6 @@
|
||||
power1 {
|
||||
label = "bcm53xx:red:power";
|
||||
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
router0 {
|
||||
@ -70,7 +79,6 @@
|
||||
router1 {
|
||||
label = "bcm53xx:amber:router";
|
||||
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan {
|
||||
@ -82,13 +90,11 @@
|
||||
wireless0 {
|
||||
label = "bcm53xx:green:wireless";
|
||||
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless1 {
|
||||
label = "bcm53xx:amber:wireless";
|
||||
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
98
sys/gnu/dts/arm/bcm47081-tplink-archer-c5-v2.dts
Normal file
98
sys/gnu/dts/arm/bcm47081-tplink-archer-c5-v2.dts
Normal file
@ -0,0 +1,98 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm47081.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
|
||||
model = "TP-LINK Archer C5 V2";
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:green:2ghz";
|
||||
gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "bcm53xx:green:lan";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2-port1 {
|
||||
label = "bcm53xx:green:usb2-port1";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "bcm53xx:green:power";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
wan-green {
|
||||
label = "bcm53xx:green:wan";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:green:wps";
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan-amber {
|
||||
label = "bcm53xx:amber:wan";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:green:5ghz";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb2-port2 {
|
||||
label = "bcm53xx:green:usb2-port2";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rfkill {
|
||||
label = "WiFi";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
restart {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "bcm5301x.dtsi"
|
||||
@ -12,6 +22,14 @@
|
||||
/ {
|
||||
compatible = "brcm,bcm47081";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -31,7 +41,6 @@
|
||||
wps {
|
||||
label = "bcm53xx:blue:wps";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power {
|
||||
@ -43,7 +52,6 @@
|
||||
wan {
|
||||
label = "bcm53xx:red:wan";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -31,13 +31,11 @@
|
||||
usb {
|
||||
label = "bcm53xx:green:usb";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power-amber {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power-white {
|
||||
@ -49,37 +47,31 @@
|
||||
router-amber {
|
||||
label = "bcm53xx:amber:router";
|
||||
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
router-white {
|
||||
label = "bcm53xx:white:router";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-amber {
|
||||
label = "bcm53xx:amber:wan";
|
||||
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-white {
|
||||
label = "bcm53xx:white:wan";
|
||||
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless-amber {
|
||||
label = "bcm53xx:amber:wireless";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless-white {
|
||||
label = "bcm53xx:white:wireless";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
42
sys/gnu/dts/arm/bcm4709-linksys-ea9200.dts
Normal file
42
sys/gnu/dts/arm/bcm4709-linksys-ea9200.dts
Normal file
@ -0,0 +1,42 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm4709.dtsi"
|
||||
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
|
||||
model = "Linksys EA9200";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000
|
||||
0x88000000 0x08000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wps {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
restart {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -37,43 +47,36 @@
|
||||
power-amber {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:white:5ghz";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:white:2ghz";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:white:wps";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless {
|
||||
label = "bcm53xx:white:wireless";
|
||||
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:white:usb3";
|
||||
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:white:usb2";
|
||||
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -28,58 +38,61 @@
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power0 {
|
||||
power-white {
|
||||
label = "bcm53xx:white:power";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
power1 {
|
||||
power-amber {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-white {
|
||||
label = "bcm53xx:white:wan";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
wan-amber {
|
||||
label = "bcm53xx:amber:wan";
|
||||
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5ghz-1 {
|
||||
label = "bcm53xx:white:5ghz-1";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:white:2ghz";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wireless {
|
||||
label = "bcm53xx:white:wireless";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:white:wps";
|
||||
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz-2 {
|
||||
label = "bcm53xx:white:5ghz-2";
|
||||
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:white:usb3";
|
||||
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:white:usb2";
|
||||
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
@ -105,6 +118,12 @@
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
brightness {
|
||||
label = "Backlight";
|
||||
linux,code = <KEY_BRIGHTNESS_ZERO>;
|
||||
gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -26,49 +26,41 @@
|
||||
lan {
|
||||
label = "bcm53xx:blue:lan";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:blue:wps";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:blue:2ghz";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:blue:5ghz";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:blue:usb3";
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:blue:usb2";
|
||||
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-blue {
|
||||
label = "bcm53xx:blue:wan";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-amber {
|
||||
label = "bcm53xx:amber:wan";
|
||||
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power {
|
||||
|
@ -4,7 +4,17 @@
|
||||
*
|
||||
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -46,37 +56,31 @@
|
||||
wan-white {
|
||||
label = "bcm53xx:white:wan";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
power-amber {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan-amber {
|
||||
label = "bcm53xx:amber:wan";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3-white {
|
||||
label = "bcm53xx:white:usb3";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:white:2ghz";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:white:5ghz";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
36
sys/gnu/dts/arm/bcm47094-linksys-panamera.dts
Normal file
36
sys/gnu/dts/arm/bcm47094-linksys-panamera.dts
Normal file
@ -0,0 +1,36 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm47094.dtsi"
|
||||
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
|
||||
model = "Linksys EA9500";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000
|
||||
0x88000000 0x08000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wps {
|
||||
label = "WPS";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
@ -34,37 +34,31 @@
|
||||
lan3 {
|
||||
label = "bcm53xx:green:lan3";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "bcm53xx:green:lan4";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "bcm53xx:green:wan";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "bcm53xx:green:lan1";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "bcm53xx:green:lan2";
|
||||
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:green:usb3";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
status {
|
||||
@ -76,13 +70,11 @@
|
||||
2ghz {
|
||||
label = "bcm53xx:green:2ghz";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:green:5ghz";
|
||||
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -34,37 +34,31 @@
|
||||
power1 {
|
||||
label = "bcm53xx:amber:power";
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz-1 {
|
||||
label = "bcm53xx:white:5ghz-1";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz-2 {
|
||||
label = "bcm53xx:white:5ghz-2";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:white:2ghz";
|
||||
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:white:usb2";
|
||||
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:white:usb3";
|
||||
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -26,19 +26,16 @@
|
||||
usb {
|
||||
label = "bcm53xx:blue:usb";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:blue:wps";
|
||||
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
5ghz {
|
||||
label = "bcm53xx:blue:5ghz";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
system {
|
||||
@ -48,6 +45,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
2ghz {
|
||||
label = "bcm53xx:blue:2ghz";
|
||||
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
@ -72,3 +78,30 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ranges = <0x00000000 0 0 0 0 0x00100000>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
bridge@0,0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
wifi@0,1,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ranges = <0x00000000 0 0 0 0x00100000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
pcie0_chipcommon: chipcommon@0 {
|
||||
reg = <0 0x1000>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -18,10 +18,6 @@
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
chipcommonA {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0x18000000 0x00001000>;
|
||||
@ -70,10 +66,19 @@
|
||||
clocks = <&periph_clk>;
|
||||
};
|
||||
|
||||
local-timer@20600 {
|
||||
timer@20600 {
|
||||
compatible = "arm,cortex-a9-twd-timer";
|
||||
reg = <0x20600 0x100>;
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
|
||||
reg = <0x20600 0x20>;
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_EDGE_RISING)>;
|
||||
clocks = <&periph_clk>;
|
||||
};
|
||||
|
||||
watchdog@20620 {
|
||||
compatible = "arm,cortex-a9-twd-wdt";
|
||||
reg = <0x20620 0x20>;
|
||||
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
||||
IRQ_TYPE_EDGE_RISING)>;
|
||||
clocks = <&periph_clk>;
|
||||
};
|
||||
|
||||
@ -298,20 +303,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi@29000 {
|
||||
reg = <0x00029000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
spi_nor: spi-nor@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
linux,part-probe = "ofpart", "bcm47xxpart";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gmac0: ethernet@24000 {
|
||||
reg = <0x24000 0x800>;
|
||||
};
|
||||
@ -329,6 +320,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@18009000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18009000 0x50>;
|
||||
interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
lcpll0: lcpll0@1800c100 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "brcm,nsp-lcpll0";
|
||||
@ -375,4 +376,40 @@
|
||||
|
||||
brcm,nand-has-wp;
|
||||
};
|
||||
|
||||
spi@18029200 {
|
||||
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
|
||||
reg = <0x18029200 0x184>,
|
||||
<0x18029000 0x124>,
|
||||
<0x1811b408 0x004>,
|
||||
<0x180293a0 0x01c>;
|
||||
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "spi_lr_fullness_reached",
|
||||
"spi_lr_session_aborted",
|
||||
"spi_lr_impatient",
|
||||
"spi_lr_session_done",
|
||||
"spi_lr_overhead",
|
||||
"mspi_done",
|
||||
"mspi_halted";
|
||||
clocks = <&iprocmed>;
|
||||
clock-names = "iprocmed";
|
||||
num-cs = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
spi_nor: spi-nor@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
linux,part-probe = "ofpart", "bcm47xxpart";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -13,8 +13,12 @@
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
cpus {
|
||||
@ -113,6 +117,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
pcie0: pcie@2000 {
|
||||
reg = <0x00002000 0x1000>;
|
||||
};
|
||||
|
||||
usb2: usb2@4000 {
|
||||
reg = <0x4000 0x1000>;
|
||||
ranges;
|
||||
|
@ -38,14 +38,6 @@
|
||||
model = "NorthStar SVK (BCM94708)";
|
||||
compatible = "brcm,bcm94708", "brcm,bcm4708";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
@ -38,14 +38,6 @@
|
||||
model = "NorthStar SVK (BCM94709)";
|
||||
compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
@ -39,14 +39,6 @@
|
||||
model = "NorthStar Enterprise Router (BCM953012ER)";
|
||||
compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
97
sys/gnu/dts/arm/bcm953012hr.dts
Normal file
97
sys/gnu/dts/arm/bcm953012hr.dts
Normal file
@ -0,0 +1,97 @@
|
||||
/*
|
||||
* SPDX-License-Identifier: BSD-3-Clause
|
||||
*
|
||||
* Copyright(c) 2017 Broadcom
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* * Neither the name of Broadcom nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
||||
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
||||
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||||
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "bcm4708.dtsi"
|
||||
#include "bcm5301x-nand-cs0-bch4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NorthStar HR (BCM953012HR)";
|
||||
compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
ethernet2 = &gmac2;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&nandcs {
|
||||
partition@0 {
|
||||
label = "nboot";
|
||||
reg = <0x00000000 0x00200000>;
|
||||
read-only;
|
||||
};
|
||||
partition@200000 {
|
||||
label = "nenv";
|
||||
reg = <0x00200000 0x00400000>;
|
||||
};
|
||||
partition@600000 {
|
||||
label = "nsystem";
|
||||
reg = <0x00600000 0x00a00000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "nrootfs";
|
||||
reg = <0x01000000 0x07000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi_nor {
|
||||
status = "okay";
|
||||
spi-max-frequency = <62500000>;
|
||||
m25p,default-addr-width = <3>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x00000000 0x000d0000>;
|
||||
};
|
||||
partition@d000 {
|
||||
label = "env";
|
||||
reg = <0x000d0000 0x00030000>;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "system";
|
||||
reg = <0x00100000 0x00600000>;
|
||||
};
|
||||
partition@700000 {
|
||||
label = "rootfs";
|
||||
reg = <0x00700000 0x00900000>;
|
||||
};
|
||||
};
|
@ -43,15 +43,69 @@
|
||||
serial1 = &uart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
reg = <0>;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "nboot";
|
||||
reg = <0x00000000 0x00200000>;
|
||||
read-only;
|
||||
};
|
||||
partition@200000 {
|
||||
label = "nenv";
|
||||
reg = <0x00200000 0x00400000>;
|
||||
};
|
||||
partition@600000 {
|
||||
label = "nsystem";
|
||||
reg = <0x00600000 0x00a00000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "nrootfs";
|
||||
reg = <0x01000000 0x07000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi_nor {
|
||||
status = "okay";
|
||||
spi-max-frequency = <62500000>;
|
||||
m25p,default-addr-width = <3>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x00000000 0x000d0000>;
|
||||
};
|
||||
partition@d000 {
|
||||
label = "env";
|
||||
reg = <0x000d0000 0x00030000>;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "system";
|
||||
reg = <0x00100000 0x00600000>;
|
||||
};
|
||||
partition@700000 {
|
||||
label = "rootfs";
|
||||
reg = <0x00700000 0x00900000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -60,7 +60,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* USB 2/3 support needed to be complete */
|
||||
/* USB 3 support needed to be complete */
|
||||
|
||||
&amac0 {
|
||||
status = "okay";
|
||||
@ -70,6 +70,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -108,6 +112,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -60,7 +60,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* USB 2/3 support needed to be complete */
|
||||
/* USB 3 support needed to be complete */
|
||||
|
||||
&amac0 {
|
||||
status = "okay";
|
||||
@ -70,6 +70,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -108,6 +112,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -66,7 +66,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
temperature-sensor@4c {
|
||||
compatible = "adi,adt7461a";
|
||||
reg = <0x4c>;
|
||||
@ -122,6 +128,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -60,7 +60,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* USB 2/3 and SLIC support needed to be complete */
|
||||
/* USB 3 and SLIC support needed to be complete */
|
||||
|
||||
&amac0 {
|
||||
status = "okay";
|
||||
@ -74,6 +74,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -112,6 +116,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -60,7 +60,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* USB 2/3 and SLIC support needed to be complete */
|
||||
/* USB 3 and SLIC support needed to be complete */
|
||||
|
||||
&amac0 {
|
||||
status = "okay";
|
||||
@ -74,6 +74,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -112,6 +116,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -72,6 +72,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -110,6 +114,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -65,6 +65,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -103,6 +107,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -60,7 +60,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* USB 2/3 support needed to be complete */
|
||||
/* USB 3 support needed to be complete */
|
||||
|
||||
&amac0 {
|
||||
status = "okay";
|
||||
@ -74,6 +74,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
@ -112,6 +116,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -9,6 +9,7 @@
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "da850.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
compatible = "ti,da850-evm", "ti,da850";
|
||||
@ -78,7 +79,10 @@
|
||||
DRVDD-supply = <&vbat>;
|
||||
DVDD-supply = <&vbat>;
|
||||
};
|
||||
|
||||
tca6416: gpio@20 {
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x20>;
|
||||
};
|
||||
};
|
||||
wdt: wdt@21000 {
|
||||
status = "okay";
|
||||
@ -293,20 +297,27 @@
|
||||
|
||||
&vpif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vpif_capture_pins>;
|
||||
pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
|
||||
status = "okay";
|
||||
|
||||
/* VPIF capture port */
|
||||
port {
|
||||
vpif_ch0: endpoint@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
port@0 {
|
||||
vpif_input_ch0: endpoint@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
vpif_ch1: endpoint@1 {
|
||||
reg = <1>;
|
||||
bus-width = <8>;
|
||||
data-shift = <8>;
|
||||
vpif_input_ch1: endpoint@1 {
|
||||
reg = <1>;
|
||||
bus-width = <8>;
|
||||
data-shift = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
/* VPIF display port */
|
||||
port@1 {
|
||||
vpif_output_ch0: endpoint {
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
@ -123,6 +123,14 @@
|
||||
pinctrl-0 = <&system_power_pin>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "pwm-beeper";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm0b_pins>;
|
||||
pwms = <&ehrpwm0 1 1000000 0>;
|
||||
amp-supply = <&>;
|
||||
};
|
||||
|
||||
/*
|
||||
* This is a 5V current limiting regulator that is shared by USB,
|
||||
* the sensor (input) ports, the motor (output) ports and the A/DC.
|
||||
@ -139,18 +147,36 @@
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/*
|
||||
* This is a simple voltage divider on VCC5V to provide a 2.5V
|
||||
* reference signal to the ADC.
|
||||
*/
|
||||
adc_ref: regulator2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "adc ref";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v>;
|
||||
};
|
||||
|
||||
/*
|
||||
* This is the amplifier for the speaker.
|
||||
*/
|
||||
amp: regulator3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&_pins>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "amp";
|
||||
gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&pmx_core {
|
||||
status = "okay";
|
||||
|
||||
spi0_cs3_pin: pinmux_spi0_cs3_pin {
|
||||
pinctrl-single,bits = <
|
||||
/* CS3 */
|
||||
0xc 0x01000000 0x0f000000
|
||||
>;
|
||||
};
|
||||
|
||||
mmc0_cd_pin: pinmux_mmc0_cd {
|
||||
pinctrl-single,bits = <
|
||||
/* GP5[14] */
|
||||
@ -195,6 +221,13 @@
|
||||
0x4c 0x00008000 0x0000f000
|
||||
>;
|
||||
};
|
||||
|
||||
amp_pins: pinmux_amp_pins {
|
||||
pinctrl-single,bits = <
|
||||
/* GP6[15] */
|
||||
0x34 0x00000008 0x0000000f
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinconf {
|
||||
@ -293,6 +326,18 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
adc: adc@3 {
|
||||
compatible = "ti,ads7957";
|
||||
reg = <3>;
|
||||
#io-channel-cells = <1>;
|
||||
spi-max-frequency = <10000000>;
|
||||
vref-supply = <&adc_ref>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehrpwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
|
@ -153,6 +153,12 @@
|
||||
0x10 0x00000010 0x000000f0
|
||||
>;
|
||||
};
|
||||
spi0_cs3_pin: pinmux_spi0_cs3_pin {
|
||||
pinctrl-single,bits = <
|
||||
/* CS3 */
|
||||
0xc 0x01000000 0x0f000000
|
||||
>;
|
||||
};
|
||||
spi1_pins: pinmux_spi1_pins {
|
||||
pinctrl-single,bits = <
|
||||
/* SIMO, SOMI, CLK */
|
||||
@ -216,8 +222,21 @@
|
||||
0x3c 0x11111111 0xffffffff
|
||||
/* VP_DIN[8..9] */
|
||||
0x40 0x00000011 0x000000ff
|
||||
/* VP_CLKIN3, VP_CLKIN2 */
|
||||
0x4c 0x00010100 0x000f0f00
|
||||
>;
|
||||
};
|
||||
vpif_display_pins: vpif_display_pins {
|
||||
pinctrl-single,bits = <
|
||||
/* VP_DOUT[2..7] */
|
||||
0x40 0x11111100 0xffffff00
|
||||
/* VP_DOUT[10..15,0..1] */
|
||||
0x44 0x11111111 0xffffffff
|
||||
/* VP_DOUT[8..9] */
|
||||
0x48 0x00000011 0x000000ff
|
||||
/*
|
||||
* VP_CLKOUT3, VP_CLKIN3,
|
||||
* VP_CLKOUT2, VP_CLKIN2
|
||||
*/
|
||||
0x4c 0x00111100 0x00ffff00
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -345,7 +364,13 @@
|
||||
status = "disabled";
|
||||
|
||||
/* VPIF capture port */
|
||||
port {
|
||||
port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
/* VPIF display port */
|
||||
port@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
@ -25,6 +25,12 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
sata_refclk: fixedclock0 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&dm816x_pinmux {
|
||||
@ -173,3 +179,7 @@
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
mentor,multipoint = <0>;
|
||||
};
|
||||
|
||||
&sata {
|
||||
clocks = <&sysclk5_ck>, <&sata_refclk>;
|
||||
};
|
||||
|
@ -293,6 +293,13 @@
|
||||
phy-handle = <&phy1>;
|
||||
};
|
||||
|
||||
sata: sata@4a140000 {
|
||||
compatible = "ti,dm816-ahci";
|
||||
reg = <0x4a140000 0x10000>;
|
||||
interrupts = <16>;
|
||||
ti,hwmods = "sata";
|
||||
};
|
||||
|
||||
mcspi1: spi@48030000 {
|
||||
compatible = "ti,omap4-mcspi";
|
||||
reg = <0x48030000 0x1000>;
|
||||
|
@ -204,6 +204,8 @@
|
||||
tps659038: tps659038@58 {
|
||||
compatible = "ti,tps659038";
|
||||
reg = <0x58>;
|
||||
ti,palmas-override-powerhold;
|
||||
ti,system-power-controller;
|
||||
|
||||
tps659038_pmic {
|
||||
compatible = "ti,tps659038-pmic";
|
||||
|
@ -81,11 +81,7 @@
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0>;
|
||||
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
1000000 1060000
|
||||
1176000 1160000
|
||||
>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
|
||||
clocks = <&dpll_mpu_ck>;
|
||||
clock-names = "cpu";
|
||||
@ -99,6 +95,24 @@
|
||||
};
|
||||
};
|
||||
|
||||
cpu0_opp_table: opp-table {
|
||||
compatible = "operating-points-v2-ti-cpu";
|
||||
syscon = <&scm_wkup>;
|
||||
|
||||
opp_nom@1000000000 {
|
||||
opp-hz = /bits/ 64 <1000000000>;
|
||||
opp-microvolt = <1060000 850000 1150000>;
|
||||
opp-supported-hw = <0xFF 0x01>;
|
||||
opp-suspend;
|
||||
};
|
||||
|
||||
opp_od@1176000000 {
|
||||
opp-hz = /bits/ 64 <1176000000>;
|
||||
opp-microvolt = <1160000 885000 1160000>;
|
||||
opp-supported-hw = <0xFF 0x02>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The soc node represents the soc top level view. It is used for IPs
|
||||
* that are not memory mapped in the MPU view or for the MPU itself.
|
||||
@ -1984,6 +1998,27 @@
|
||||
|
||||
&cpu_thermal {
|
||||
polling-delay = <500>; /* milliseconds */
|
||||
coefficients = <0 2000>;
|
||||
};
|
||||
|
||||
&gpu_thermal {
|
||||
coefficients = <0 2000>;
|
||||
};
|
||||
|
||||
&core_thermal {
|
||||
coefficients = <0 2000>;
|
||||
};
|
||||
|
||||
&dspeve_thermal {
|
||||
coefficients = <0 2000>;
|
||||
};
|
||||
|
||||
&iva_thermal {
|
||||
coefficients = <0 2000>;
|
||||
};
|
||||
|
||||
&cpu_crit {
|
||||
temperature = <120000>; /* milli Celsius */
|
||||
};
|
||||
|
||||
/include/ "dra7xx-clocks.dtsi"
|
||||
|
@ -17,6 +17,7 @@
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <1>;
|
||||
operating-points-v2 = <&cpu0_opp_table>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -79,6 +80,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
opp-shared;
|
||||
};
|
||||
|
||||
&dss {
|
||||
reg = <0x58000000 0x80>,
|
||||
<0x58004054 0x4>,
|
||||
|
@ -215,6 +215,8 @@
|
||||
&dsi_0 {
|
||||
vddcore-supply = <&ldo6_reg>;
|
||||
vddio-supply = <&ldo6_reg>;
|
||||
samsung,burst-clock-frequency = <250000000>;
|
||||
samsung,esc-clock-frequency = <20000000>;
|
||||
samsung,pll-clock-frequency = <24000000>;
|
||||
status = "okay";
|
||||
|
||||
|
@ -745,23 +745,23 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@50000000 {
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <825000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <875000>;
|
||||
};
|
||||
@ -835,23 +835,23 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@50000000 {
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp@80000000 {
|
||||
opp-80000000 {
|
||||
opp-hz = /bits/ 64 <80000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
@ -861,19 +861,19 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@50000000 {
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
};
|
||||
opp@80000000 {
|
||||
opp-80000000 {
|
||||
opp-hz = /bits/ 64 <80000000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
};
|
||||
};
|
||||
@ -882,19 +882,19 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@50000000 {
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
};
|
||||
opp@80000000 {
|
||||
opp-80000000 {
|
||||
opp-hz = /bits/ 64 <80000000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
};
|
||||
opp@300000000 {
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
};
|
||||
};
|
||||
@ -903,13 +903,13 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@50000000 {
|
||||
opp-50000000 {
|
||||
opp-hz = /bits/ 64 <50000000>;
|
||||
};
|
||||
opp@80000000 {
|
||||
opp-80000000 {
|
||||
opp-hz = /bits/ 64 <80000000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
};
|
||||
|
@ -283,15 +283,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
watchdog: watchdog@10060000 {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clock CLK_WDT>;
|
||||
clock-names = "watchdog";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc: rtc@10070000 {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x10070000 0x100>;
|
||||
@ -771,6 +762,7 @@
|
||||
clocks = <&clock CLK_HDMI_CEC>;
|
||||
clock-names = "hdmicec";
|
||||
samsung,syscon-phandle = <&pmu_system_controller>;
|
||||
hdmi-phandle = <&hdmi>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "disabled";
|
||||
|
@ -328,7 +328,3 @@
|
||||
&tmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -197,6 +197,8 @@
|
||||
&dsi_0 {
|
||||
vddcore-supply = <&vusb_reg>;
|
||||
vddio-supply = <&vmipi_reg>;
|
||||
samsung,burst-clock-frequency = <500000000>;
|
||||
samsung,esc-clock-frequency = <20000000>;
|
||||
samsung,pll-clock-frequency = <24000000>;
|
||||
status = "okay";
|
||||
|
||||
|
@ -119,6 +119,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
watchdog: watchdog@10060000 {
|
||||
compatible = "samsung,s3c6410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clock CLK_WDT>;
|
||||
clock-names = "watchdog";
|
||||
};
|
||||
|
||||
clock: clock-controller@10030000 {
|
||||
compatible = "samsung,exynos4210-clock";
|
||||
reg = <0x10030000 0x20000>;
|
||||
@ -335,15 +343,15 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
opp-microvolt = <1025000>;
|
||||
};
|
||||
opp@267000000 {
|
||||
opp-267000000 {
|
||||
opp-hz = /bits/ 64 <267000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
@ -353,13 +361,13 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
};
|
||||
opp@160000000 {
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
};
|
||||
};
|
||||
@ -368,10 +376,10 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@5000000 {
|
||||
opp-5000000 {
|
||||
opp-hz = /bits/ 64 <5000000>;
|
||||
};
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
};
|
||||
@ -380,10 +388,10 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@10000000 {
|
||||
opp-10000000 {
|
||||
opp-hz = /bits/ 64 <10000000>;
|
||||
};
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
};
|
||||
};
|
||||
@ -392,13 +400,13 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
opp@134000000 {
|
||||
opp-134000000 {
|
||||
opp-hz = /bits/ 64 <134000000>;
|
||||
};
|
||||
opp@160000000 {
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
};
|
||||
};
|
||||
@ -407,13 +415,13 @@
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp@100000000 {
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
};
|
||||
opp@160000000 {
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
};
|
||||
opp@200000000 {
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
};
|
||||
};
|
||||
|
@ -495,7 +495,3 @@
|
||||
vtmu-supply = <&ldo16_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -555,7 +555,3 @@
|
||||
vtmu-supply = <&ldo10_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -541,7 +541,3 @@
|
||||
&serial_3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user