d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

If flag 0x4000 (Sleephack) is defined, assume that the disk is sleeping

Browse Source 
if all registers are 0xff.

This allows me to run with flags 0xc0ff on my IBM-DMCA-21440 disk, which
gives 5MB/sec sequential read :-)

If you have a laptop, try adding flag 0x4000 to your disk, and tell me if
it makes any difference for you.
This commit is contained in:
Poul-Henning Kamp 1997-04-03 09:43:50 +00:00
parent 9751c10998
commit 8520e7cbc1
1 changed files with 35 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
sys/i386/isa/wd.c
View File

@ -34,7 +34,7 @@
* SUCH DAMAGE. * SUCH DAMAGE.
* *
* from: @(#)wd.c 7.2 (Berkeley) 5/9/91 * from: @(#)wd.c 7.2 (Berkeley) 5/9/91
* $Id: wd.c,v 1.126 1997/03/11 23:17:04 se Exp $ * $Id: wd.c,v 1.127 1997/03/24 11:24:12 bde Exp $
*/ */
/* TODO: /* TODO:
@ -1392,9 +1392,41 @@ wdcommand(struct disk *du, u_int cylinder, u_int head, u_int sector,
u_int wdc; u_int wdc;
wdc = du->dk_port; wdc = du->dk_port;
if (du->cfg_flags & WDOPT_SLEEPHACK) if (du->cfg_flags & WDOPT_SLEEPHACK) {
if(inb(wdc + wd_status) == WDCS_BUSY) /* OK, so the APM bios has put the disk into SLEEP mode,
* how can we tell ? Uhm, we can't. There is no
* standardized way of finding out, and the only way to
* wake it up is to reset it. Bummer.
*
* All the many and varied versions of the IDE/ATA standard
* explicitly tells us not to look at these registers if
* the disk is in SLEEP mode. Well, too bad really, we
* have to find out if it's in sleep mode before we can
* avoid reading the registers.
*
* I have reason to belive that most disks will return
* either 0xff or 0x00 in all but the status register
* when in SLEEP mode, but I have yet to see one return
* 0x00, so we don't check for that yet.
*
* The check for WDCS_BUSY is for the case where the
* bios spins up the disk for us, but doesn't initialize
* it correctly /phk
*/
if(inb(wdc + wd_precomp) + inb(wdc + wd_cyl_lo) +
inb(wdc + wd_cyl_hi) + inb(wdc + wd_sdh) +
inb(wdc + wd_sector) + inb(wdc + wd_seccnt) == 6 * 0xff) {
if (bootverbose)
printf("wd(%d,%d): disk aSLEEP\n",
du->dk_ctrlr, du->dk_unit);
wdunwedge(du); wdunwedge(du);
} else if(inb(wdc + wd_status) == WDCS_BUSY) {
if (bootverbose)
printf("wd(%d,%d): disk is BUSY\n",
du->dk_ctrlr, du->dk_unit);
wdunwedge(du);
}
}
if (wdwait(du, 0, TIMEOUT) < 0) if (wdwait(du, 0, TIMEOUT) < 0)
return (1); return (1);