diff --git a/sys/modules/ath/Makefile b/sys/modules/ath/Makefile index 332eb75714de..9bfc29c15f5e 100644 --- a/sys/modules/ath/Makefile +++ b/sys/modules/ath/Makefile @@ -31,8 +31,8 @@ ATH_RATE?= sample # tx rate control algorithm -.PATH: ${.CURDIR}/../../dev/ath -.PATH: ${.CURDIR}/../../dev/ath/ath_hal +.PATH: ${SRCTOP}/sys/dev/ath +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal KMOD= if_ath SRCS= if_ath.c if_ath_alq.c if_ath_debug.c if_ath_keycache.c if_ath_sysctl.c @@ -46,7 +46,7 @@ SRCS+= device_if.h bus_if.h pci_if.h opt_inet.h opt_ath.h opt_ah.h opt_wlan.h # # AR5210 support; these are first generation 11a-only devices. # -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar5210 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar5210 SRCS+= ah_eeprom_v1.c \ ar5210_attach.c ar5210_beacon.c ar5210_interrupts.c \ ar5210_keycache.c ar5210_misc.c ar5210_phy.c ar5210_power.c \ @@ -56,7 +56,7 @@ SRCS+= ah_eeprom_v1.c \ # AR5211 support; these are second generation 11b/g/a devices # (but 11g was OFDM only and is not supported). # -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar5211 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar5211 SRCS+= ar5211_attach.c ar5211_beacon.c ar5211_interrupts.c \ ar5211_keycache.c ar5211_misc.c ar5211_phy.c ar5211_power.c \ ar5211_recv.c ar5211_reset.c ar5211_xmit.c @@ -64,7 +64,7 @@ SRCS+= ar5211_attach.c ar5211_beacon.c ar5211_interrupts.c \ # # AR5212 support; this covers all other pci/cardbus legacy parts. # -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar5212 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar5212 SRCS+= ar5212_ani.c ar5212_attach.c ar5212_beacon.c ar5212_eeprom.c \ ar5212_gpio.c ar5212_interrupts.c ar5212_keycache.c ar5212_misc.c \ ar5212_phy.c ar5212_power.c ar5212_recv.c ar5212_reset.c \ @@ -85,7 +85,7 @@ SRCS+= ar5413.c # NB: 9160 depends on 5416 but 5416 does not require 9160 # # + 5416 (Owl) -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar5416 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar5416 SRCS+= ah_eeprom_v14.c ah_eeprom_v4k.c \ ar5416_ani.c ar5416_attach.c ar5416_beacon.c ar5416_btcoex.c \ ar5416_cal.c ar5416_cal_iq.c ar5416_cal_adcgain.c ar5416_cal_adcdc.c \ @@ -97,7 +97,7 @@ SRCS+= ah_eeprom_v14.c ah_eeprom_v4k.c \ SRCS+= ar2133.c # + AR9160 (Sowl) -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar9001 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar9001 SRCS+= ar9160_attach.c # + AR9130 - (Sowl) - Embedded (AR913x SoC) @@ -111,7 +111,7 @@ SRCS+= ar9130_attach.c ar9130_eeprom.c ar9130_phy.c # AR9002 series chips # + AR9220/AR9280 - Merlin -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar9002 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar9002 SRCS+= ar9280.c ar9280_attach.c ar9280_olc.c # + AR9285 - Kite @@ -119,13 +119,13 @@ SRCS+= ar9285.c ar9285_reset.c ar9285_attach.c ar9285_cal.c ar9285_phy.c SRCS+= ar9285_diversity.c ar9285_btcoex.c # + AR9287 - Kiwi -.PATH: ${.CURDIR}/../../dev/ath/ath_hal +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal SRCS+= ah_eeprom_9287.c -.PATH: ${.CURDIR}/../../dev/ath/ath_hal/ar9002 +.PATH: ${SRCTOP}/sys/dev/ath/ath_hal/ar9002 SRCS+= ar9287.c ar9287_reset.c ar9287_attach.c ar9287_cal.c ar9287_olc.c # + AR9300 HAL -.PATH: ${.CURDIR}/../../contrib/dev/ath/ath_hal/ar9300 +.PATH: ${SRCTOP}/sys/contrib/dev/ath/ath_hal/ar9300 SRCS+= ar9300_interrupts.c ar9300_radar.c ar9300_ani.c ar9300_keycache.c SRCS+= ar9300_radio.c ar9300_xmit.c ar9300_attach.c ar9300_mci.c ar9300_stub.c SRCS+= ar9300_xmit_ds.c ar9300_beacon.c ar9300_misc.c ar9300_recv.c @@ -135,22 +135,22 @@ SRCS+= ar9300_power.c ar9300_timer.c ar9300_spectral.c # NB: rate control is bound to the driver by symbol names so only pick one .if ${ATH_RATE} == "sample" -.PATH: ${.CURDIR}/../../dev/ath/ath_rate/sample +.PATH: ${SRCTOP}/sys/dev/ath/ath_rate/sample SRCS+= sample.c .elif ${ATH_RATE} == "onoe" -.PATH: ${.CURDIR}/../../dev/ath/ath_rate/onoe +.PATH: ${SRCTOP}/sys/dev/ath/ath_rate/onoe SRCS+= onoe.c .elif ${ATH_RATE} == "amrr" -.PATH: ${.CURDIR}/../../dev/ath/ath_rate/amrr +.PATH: ${SRCTOP}/sys/dev/ath/ath_rate/amrr SRCS+= amrr.c .endif # DFS -.PATH: ${.CURDIR}/../../dev/ath/ath_dfs/null +.PATH: ${SRCTOP}/sys/dev/ath/ath_dfs/null SRCS+= dfs_null.c -CFLAGS+= -I. -I${.CURDIR}/../../dev/ath -I${.CURDIR}/../../dev/ath/ath_hal -CFLAGS+= -I. -I${.CURDIR}/../../contrib/dev/ath/ath_hal/ +CFLAGS+= -I. -I${SRCTOP}/sys/dev/ath -I${SRCTOP}/sys/dev/ath/ath_hal +CFLAGS+= -I. -I${SRCTOP}/sys/contrib/dev/ath/ath_hal/ .if !defined(KERNBUILDDIR) opt_ah.h: