d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add in Bill Sommerfelds -Wformat changes. Set up default node && port

Browse Source 
WWNs correctly (Again!) - this time for the case that we're not going
to fully init the adapter if isp_init is called (with ISP_CFG_NOINIT
set in options). The pupose for this is to bring the adapter up to
almost ready to go, get info out of NVRAM, but to not start it up- leaving
it until later to actually start things up if wanted (and possibly with
different roles selected).
This commit is contained in:
Matt Jacob 2000-12-29 19:12:44 +00:00
parent f09b192280
commit 8ead30564e
1 changed files with 35 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

66
sys/dev/isp/isp.c
View File

@ -64,43 +64,43 @@
/*
* Local static data
*/
static char *warnlun =
static const char warnlun[] =
"WARNING- cannot determine Expanded LUN capability- limiting to one LUN";
static char *portshift =
static const char portshift[] =
"Target %d Loop ID 0x%x (Port 0x%x) => Loop 0x%x (Port 0x%x)";
static char *portdup =
static const char portdup[] =
"Target %d duplicates Target %d- killing off both";
static char *retained =
static const char retained[] =
"Retaining Loop ID 0x%x for Target %d (Port 0x%x)";
#ifdef ISP2100_FABRIC
static char *lretained =
static const char lretained[] =
"Retained login of Target %d (Loop ID 0x%x) Port 0x%x";
static char *plogout =
static const char plogout[] =
"Logging out Target %d at Loop ID 0x%x (Port 0x%x)";
static char *plogierr =
static const char plogierr[] =
"Command Error in PLOGI for Port 0x%x (0x%x)";
static char *nopdb =
static const char nopdb[] =
"Could not get PDB for Device @ Port 0x%x";
static char *pdbmfail1 =
static const char pdbmfail1[] =
"PDB Loop ID info for Device @ Port 0x%x does not match up (0x%x)";
static char *pdbmfail2 =
static const char pdbmfail2[] =
"PDB Port info for Device @ Port 0x%x does not match up (0x%x)";
static char *ldumped =
static const char ldumped[] =
"Target %d (Loop ID 0x%x) Port 0x%x dumped after login info mismatch";
#endif
static char *notresp =
static const char notresp[] =
"Not RESPONSE in RESPONSE Queue (type 0x%x) @ idx %d (next %d) nlooked %d";
static char *xact1 =
static const char xact1[] =
"HBA attempted queued transaction with disconnect not set for %d.%d.%d";
static char *xact2 =
static const char xact2[] =
"HBA attempted queued transaction to target routine %d on target %d bus %d";
static char *xact3 =
static const char xact3[] =
"HBA attempted queued cmd for %d.%d.%d when queueing disabled";
static char *pskip =
static const char pskip[] =
"SCSI phase skipped for target %d.%d.%d";
static char *topology =
static const char topology[] =
"Loop ID %d, AL_PA 0x%x, Port ID 0x%x, Loop State 0x%x, Topology '%s'";
static char *finmsg =
static const char finmsg[] =
"(%d.%d.%d): FIN dl%d resid%d STS 0x%x SKEY %c XS_ERR=0x%x";
/*
* Local function prototypes.
@ -186,7 +186,7 @@ isp_reset(isp)
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE);
mbs.param[0] = MBOX_ABOUT_FIRMWARE;
isp_mboxcmd(isp, &mbs, MBLOGNONE);
isp_mboxcmd(isp, &mbs, MBOX_COMMAND_ERROR);
/*
* This *shouldn't* fail.....
*/
@ -229,7 +229,7 @@ isp_reset(isp)
* XXX: Should probably do some bus sensing.
*/
} else if (IS_ULTRA2(isp)) {
static char *m = "bus %d is in %s Mode";
static const char m[] = "bus %d is in %s Mode";
u_int16_t l;
sdparam *sdp = isp->isp_param;
@ -729,10 +729,12 @@ isp_init(isp)
if (IS_DUALBUS(isp)) {
isp_setdfltparm(isp, 1);
}
if (IS_FC(isp)) {
isp_fibre_init(isp);
} else {
isp_scsi_init(isp);
if ((isp->isp_confopts & ISP_CFG_NOINIT) == 0) {
if (IS_FC(isp)) {
isp_fibre_init(isp);
} else {
isp_scsi_init(isp);
}
}
}
@ -1288,16 +1290,16 @@ isp_fclink_test(isp, usdelay)
*/
enano = NANOTIME_SUB(&hrb, &hra);
isp_prt(isp, ISP_LOGDEBUG3, "usec%d: 0x%lx->0x%lx enano %lu",
count, (long) GET_NANOSEC(&hra), (long) GET_NANOSEC(&hrb),
(enano > ((u_int64_t)0xffffffff))? 0xffffffff :
(unsigned long) (enano & 0xffffffff));
/*
* If the elapsed time is less than 1 millisecond,
* delay a period of time up to that millisecond of
* waiting.
*/
isp_prt(isp, ISP_LOGDEBUG3, "usec%d: 0x%lx->0x%lx enano %u",
count, (long) GET_NANOSEC(&hra), (long) GET_NANOSEC(&hrb),
enano);
/*
*
* This peculiar code is an attempt to try and avoid
* invoking u_int64_t math support functions for some
* platforms where linkage is a problem.
@ -2531,7 +2533,7 @@ isp_intr(arg)
int obits, i = 0;
if ((obits = isp->isp_mboxbsy) != 0) {
isp->isp_mboxtmp[i++] = mbox;
for (i = 1; i < 8; i++) {
for (i = 1; i < MAX_MAILBOX; i++) {
if ((obits & (1 << i)) == 0) {
continue;
}
@ -4305,6 +4307,8 @@ isp_setdfltparm(isp, channel)
(u_int32_t) (fcp->isp_portwwn >> 32),
(u_int32_t) (fcp->isp_portwwn & 0xffffffff));
}
fcp->isp_nodewwn = ISP_NODEWWN(isp);
fcp->isp_portwwn = ISP_PORTWWN(isp);
return;
}