Add missing file, it is sorely needed to make if_sk.c compile again.
This commit is contained in:
Wilko Bulte
parent
0c8f620780
commit
95ad0a1f28
171
sys/dev/sk/yukonreg.h
Normal file
171
sys/dev/sk/yukonreg.h
Normal file
@ -0,0 +1,171 @@
|
||||
/* $OpenBSD: yukonreg.h,v 1.2 2003/08/12 05:23:06 nate Exp $ */
|
||||
/*
|
||||
* Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
|
||||
*
|
||||
* Permission to use, copy, modify, and distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/* General Purpose Status Register (GPSR) */
|
||||
#define YUKON_GPSR 0x0000
|
||||
|
||||
#define YU_GPSR_SPEED 0x8000 /* speed 0 - 10Mbps, 1 - 100Mbps */
|
||||
#define YU_GPSR_DUPLEX 0x4000 /* 0 - half duplex, 1 - full duplex */
|
||||
#define YU_GPSR_FCTL_TX 0x2000 /* flow control */
|
||||
#define YU_GPSR_LINK 0x1000 /* link status (down/up) */
|
||||
#define YU_GPSR_PAUSE 0x0800 /* flow control enable/disable */
|
||||
#define YU_GPSR_TX_IN_PROG 0x0400 /* transmit in progress */
|
||||
#define YU_GPSR_EXCESS_COL 0x0200 /* excessive collisions occurred */
|
||||
#define YU_GPSR_LATE_COL 0x0100 /* late collision occurred */
|
||||
#define YU_GPSR_MII_PHY_STC 0x0020 /* MII PHY status change */
|
||||
#define YU_GPSR_GIG_SPEED 0x0010 /* Gigabit Speed (0 - use speed bit) */
|
||||
#define YU_GPSR_PARTITION 0x0008 /* partition mode */
|
||||
#define YU_GPSR_FCTL_RX 0x0004 /* flow control enable/disable */
|
||||
#define YU_GPSR_PROMS_EN 0x0002 /* promiscuous mode enable/disable */
|
||||
|
||||
/* General Purpose Control Register (GPCR) */
|
||||
#define YUKON_GPCR 0x0004
|
||||
|
||||
#define YU_GPCR_FCTL_TX 0x2000 /* Transmit flow control 802.3x */
|
||||
#define YU_GPCR_TXEN 0x1000 /* Transmit Enable */
|
||||
#define YU_GPCR_RXEN 0x0800 /* Receive Enable */
|
||||
#define YU_GPCR_LPBK 0x0200 /* Loopback Enable */
|
||||
#define YU_GPCR_PAR 0x0100 /* Partition Enable */
|
||||
#define YU_GPCR_GIG 0x0080 /* Gigabit Speed */
|
||||
#define YU_GPCR_FLP 0x0040 /* Force Link Pass */
|
||||
#define YU_GPCR_DUPLEX 0x0020 /* Duplex Enable */
|
||||
#define YU_GPCR_FCTL_RX 0x0010 /* Receive flow control 802.3x */
|
||||
#define YU_GPCR_SPEED 0x0008 /* Port Speed */
|
||||
#define YU_GPCR_DPLX_EN 0x0004 /* Enable Auto-Update for duplex */
|
||||
#define YU_GPCR_FCTL_EN 0x0002 /* Enabel Auto-Update for 802.3x */
|
||||
#define YU_GPCR_SPEED_EN 0x0001 /* Enable Auto-Update for speed */
|
||||
|
||||
/* Transmit Control Register (TCR) */
|
||||
#define YUKON_TCR 0x0008
|
||||
|
||||
#define YU_TCR_FJ 0x8000 /* force jam / flow control */
|
||||
#define YU_TCR_CRCD 0x4000 /* insert CRC (0 - enable) */
|
||||
#define YU_TCR_PADD 0x2000 /* pad packets to 64b (0 - enable) */
|
||||
#define YU_TCR_COLTH 0x1c00 /* collision threshold */
|
||||
|
||||
/* Receive Control Register (RCR) */
|
||||
#define YUKON_RCR 0x000c
|
||||
|
||||
#define YU_RCR_UFLEN 0x8000 /* unicast filter enable */
|
||||
#define YU_RCR_MUFLEN 0x4000 /* multicast filter enable */
|
||||
#define YU_RCR_CRCR 0x2000 /* remove CRC */
|
||||
#define YU_RCR_PASSFC 0x1000 /* pass flow control packets */
|
||||
|
||||
/* Transmit Flow Control Register (TFCR) */
|
||||
#define YUKON_TFCR 0x0010 /* Pause Time */
|
||||
|
||||
/* Transmit Parameter Register (TPR) */
|
||||
#define YUKON_TPR 0x0014
|
||||
|
||||
#define YU_TPR_JAM_LEN(x) (((x) & 0x3) << 14)
|
||||
#define YU_TPR_JAM_IPG(x) (((x) & 0x1f) << 9)
|
||||
#define YU_TPR_JAM2DATA_IPG(x) (((x) & 0x1f) << 4)
|
||||
|
||||
/* Serial Mode Register (SMR) */
|
||||
#define YUKON_SMR 0x0018
|
||||
|
||||
#define YU_SMR_DATA_BLIND(x) (((x) & 0x1f) << 11)
|
||||
#define YU_SMR_LIMIT4 0x0400 /* reset after 16 / 4 collisions */
|
||||
#define YU_SMR_MFL_JUMBO 0x0100 /* max frame length for jumbo frames */
|
||||
#define YU_SMR_MFL_VLAN 0x0200 /* max frame length + vlan tag */
|
||||
#define YU_SMR_IPG_DATA(x) ((x) & 0x1f)
|
||||
|
||||
/* Source Address Low #1 (SAL1) */
|
||||
#define YUKON_SAL1 0x001c /* SA1[15:0] */
|
||||
|
||||
/* Source Address Middle #1 (SAM1) */
|
||||
#define YUKON_SAM1 0x0020 /* SA1[31:16] */
|
||||
|
||||
/* Source Address High #1 (SAH1) */
|
||||
#define YUKON_SAH1 0x0024 /* SA1[47:32] */
|
||||
|
||||
/* Source Address Low #2 (SAL2) */
|
||||
#define YUKON_SAL2 0x0028 /* SA2[15:0] */
|
||||
|
||||
/* Source Address Middle #2 (SAM2) */
|
||||
#define YUKON_SAM2 0x002c /* SA2[31:16] */
|
||||
|
||||
/* Source Address High #2 (SAH2) */
|
||||
#define YUKON_SAH2 0x0030 /* SA2[47:32] */
|
||||
|
||||
/* Multicatst Address Hash Register 1 (MCAH1) */
|
||||
#define YUKON_MCAH1 0x0034
|
||||
|
||||
/* Multicatst Address Hash Register 2 (MCAH2) */
|
||||
#define YUKON_MCAH2 0x0038
|
||||
|
||||
/* Multicatst Address Hash Register 3 (MCAH3) */
|
||||
#define YUKON_MCAH3 0x003c
|
||||
|
||||
/* Multicatst Address Hash Register 4 (MCAH4) */
|
||||
#define YUKON_MCAH4 0x0040
|
||||
|
||||
/* Transmit Interrupt Register (TIR) */
|
||||
#define YUKON_TIR 0x0044
|
||||
|
||||
#define YU_TIR_OUT_UNICAST 0x0001 /* Num Unicast Packets Transmitted */
|
||||
#define YU_TIR_OUT_BROADCAST 0x0002 /* Num Broadcast Packets Transmitted */
|
||||
#define YU_TIR_OUT_PAUSE 0x0004 /* Num Pause Packets Transmitted */
|
||||
#define YU_TIR_OUT_MULTICAST 0x0008 /* Num Multicast Packets Transmitted */
|
||||
#define YU_TIR_OUT_OCTETS 0x0030 /* Num Bytes Transmitted */
|
||||
#define YU_TIR_OUT_64_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_127_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_255_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_511_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_1023_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_1518_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_MAX_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_SPARE 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_COLLISIONS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_LATE 0x0000 /* Num Packets Transmitted */
|
||||
|
||||
/* Receive Interrupt Register (RIR) */
|
||||
#define YUKON_RIR 0x0048
|
||||
|
||||
/* Transmit and Receive Interrupt Register (TRIR) */
|
||||
#define YUKON_TRIR 0x004c
|
||||
|
||||
/* Transmit Interrupt Mask Register (TIMR) */
|
||||
#define YUKON_TIMR 0x0050
|
||||
|
||||
/* Receive Interrupt Mask Register (RIMR) */
|
||||
#define YUKON_RIMR 0x0054
|
||||
|
||||
/* Transmit and Receive Interrupt Mask Register (TRIMR) */
|
||||
#define YUKON_TRIMR 0x0058
|
||||
|
||||
/* SMI Control Register (SMICR) */
|
||||
#define YUKON_SMICR 0x0080
|
||||
|
||||
#define YU_SMICR_PHYAD(x) (((x) & 0x1f) << 11)
|
||||
#define YU_SMICR_REGAD(x) (((x) & 0x1f) << 6)
|
||||
#define YU_SMICR_OPCODE 0x0020 /* opcode (0 - write, 1 - read) */
|
||||
#define YU_SMICR_OP_READ 0x0020 /* opcode read */
|
||||
#define YU_SMICR_OP_WRITE 0x0000 /* opcode write */
|
||||
#define YU_SMICR_READ_VALID 0x0010 /* read valid */
|
||||
#define YU_SMICR_BUSY 0x0008 /* busy (writing) */
|
||||
|
||||
/* SMI Data Register (SMIDR) */
|
||||
#define YUKON_SMIDR 0x0084
|
||||
|
||||
/* PHY Addres Register (PAR) */
|
||||
#define YUKON_PAR 0x0088
|
||||
|
||||
#define YU_PAR_MIB_CLR 0x0020 /* MIB Counters Clear Mode */
|
||||
#define YU_PAR_LOAD_TSTCNT 0x0010 /* Load count 0xfffffff0 into cntr */
|
||||
171
sys/pci/yukonreg.h
Normal file
171
sys/pci/yukonreg.h
Normal file
@ -0,0 +1,171 @@
|
||||
/* $OpenBSD: yukonreg.h,v 1.2 2003/08/12 05:23:06 nate Exp $ */
|
||||
/*
|
||||
* Copyright (c) 2003 Nathan L. Binkert <binkertn@umich.edu>
|
||||
*
|
||||
* Permission to use, copy, modify, and distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/* General Purpose Status Register (GPSR) */
|
||||
#define YUKON_GPSR 0x0000
|
||||
|
||||
#define YU_GPSR_SPEED 0x8000 /* speed 0 - 10Mbps, 1 - 100Mbps */
|
||||
#define YU_GPSR_DUPLEX 0x4000 /* 0 - half duplex, 1 - full duplex */
|
||||
#define YU_GPSR_FCTL_TX 0x2000 /* flow control */
|
||||
#define YU_GPSR_LINK 0x1000 /* link status (down/up) */
|
||||
#define YU_GPSR_PAUSE 0x0800 /* flow control enable/disable */
|
||||
#define YU_GPSR_TX_IN_PROG 0x0400 /* transmit in progress */
|
||||
#define YU_GPSR_EXCESS_COL 0x0200 /* excessive collisions occurred */
|
||||
#define YU_GPSR_LATE_COL 0x0100 /* late collision occurred */
|
||||
#define YU_GPSR_MII_PHY_STC 0x0020 /* MII PHY status change */
|
||||
#define YU_GPSR_GIG_SPEED 0x0010 /* Gigabit Speed (0 - use speed bit) */
|
||||
#define YU_GPSR_PARTITION 0x0008 /* partition mode */
|
||||
#define YU_GPSR_FCTL_RX 0x0004 /* flow control enable/disable */
|
||||
#define YU_GPSR_PROMS_EN 0x0002 /* promiscuous mode enable/disable */
|
||||
|
||||
/* General Purpose Control Register (GPCR) */
|
||||
#define YUKON_GPCR 0x0004
|
||||
|
||||
#define YU_GPCR_FCTL_TX 0x2000 /* Transmit flow control 802.3x */
|
||||
#define YU_GPCR_TXEN 0x1000 /* Transmit Enable */
|
||||
#define YU_GPCR_RXEN 0x0800 /* Receive Enable */
|
||||
#define YU_GPCR_LPBK 0x0200 /* Loopback Enable */
|
||||
#define YU_GPCR_PAR 0x0100 /* Partition Enable */
|
||||
#define YU_GPCR_GIG 0x0080 /* Gigabit Speed */
|
||||
#define YU_GPCR_FLP 0x0040 /* Force Link Pass */
|
||||
#define YU_GPCR_DUPLEX 0x0020 /* Duplex Enable */
|
||||
#define YU_GPCR_FCTL_RX 0x0010 /* Receive flow control 802.3x */
|
||||
#define YU_GPCR_SPEED 0x0008 /* Port Speed */
|
||||
#define YU_GPCR_DPLX_EN 0x0004 /* Enable Auto-Update for duplex */
|
||||
#define YU_GPCR_FCTL_EN 0x0002 /* Enabel Auto-Update for 802.3x */
|
||||
#define YU_GPCR_SPEED_EN 0x0001 /* Enable Auto-Update for speed */
|
||||
|
||||
/* Transmit Control Register (TCR) */
|
||||
#define YUKON_TCR 0x0008
|
||||
|
||||
#define YU_TCR_FJ 0x8000 /* force jam / flow control */
|
||||
#define YU_TCR_CRCD 0x4000 /* insert CRC (0 - enable) */
|
||||
#define YU_TCR_PADD 0x2000 /* pad packets to 64b (0 - enable) */
|
||||
#define YU_TCR_COLTH 0x1c00 /* collision threshold */
|
||||
|
||||
/* Receive Control Register (RCR) */
|
||||
#define YUKON_RCR 0x000c
|
||||
|
||||
#define YU_RCR_UFLEN 0x8000 /* unicast filter enable */
|
||||
#define YU_RCR_MUFLEN 0x4000 /* multicast filter enable */
|
||||
#define YU_RCR_CRCR 0x2000 /* remove CRC */
|
||||
#define YU_RCR_PASSFC 0x1000 /* pass flow control packets */
|
||||
|
||||
/* Transmit Flow Control Register (TFCR) */
|
||||
#define YUKON_TFCR 0x0010 /* Pause Time */
|
||||
|
||||
/* Transmit Parameter Register (TPR) */
|
||||
#define YUKON_TPR 0x0014
|
||||
|
||||
#define YU_TPR_JAM_LEN(x) (((x) & 0x3) << 14)
|
||||
#define YU_TPR_JAM_IPG(x) (((x) & 0x1f) << 9)
|
||||
#define YU_TPR_JAM2DATA_IPG(x) (((x) & 0x1f) << 4)
|
||||
|
||||
/* Serial Mode Register (SMR) */
|
||||
#define YUKON_SMR 0x0018
|
||||
|
||||
#define YU_SMR_DATA_BLIND(x) (((x) & 0x1f) << 11)
|
||||
#define YU_SMR_LIMIT4 0x0400 /* reset after 16 / 4 collisions */
|
||||
#define YU_SMR_MFL_JUMBO 0x0100 /* max frame length for jumbo frames */
|
||||
#define YU_SMR_MFL_VLAN 0x0200 /* max frame length + vlan tag */
|
||||
#define YU_SMR_IPG_DATA(x) ((x) & 0x1f)
|
||||
|
||||
/* Source Address Low #1 (SAL1) */
|
||||
#define YUKON_SAL1 0x001c /* SA1[15:0] */
|
||||
|
||||
/* Source Address Middle #1 (SAM1) */
|
||||
#define YUKON_SAM1 0x0020 /* SA1[31:16] */
|
||||
|
||||
/* Source Address High #1 (SAH1) */
|
||||
#define YUKON_SAH1 0x0024 /* SA1[47:32] */
|
||||
|
||||
/* Source Address Low #2 (SAL2) */
|
||||
#define YUKON_SAL2 0x0028 /* SA2[15:0] */
|
||||
|
||||
/* Source Address Middle #2 (SAM2) */
|
||||
#define YUKON_SAM2 0x002c /* SA2[31:16] */
|
||||
|
||||
/* Source Address High #2 (SAH2) */
|
||||
#define YUKON_SAH2 0x0030 /* SA2[47:32] */
|
||||
|
||||
/* Multicatst Address Hash Register 1 (MCAH1) */
|
||||
#define YUKON_MCAH1 0x0034
|
||||
|
||||
/* Multicatst Address Hash Register 2 (MCAH2) */
|
||||
#define YUKON_MCAH2 0x0038
|
||||
|
||||
/* Multicatst Address Hash Register 3 (MCAH3) */
|
||||
#define YUKON_MCAH3 0x003c
|
||||
|
||||
/* Multicatst Address Hash Register 4 (MCAH4) */
|
||||
#define YUKON_MCAH4 0x0040
|
||||
|
||||
/* Transmit Interrupt Register (TIR) */
|
||||
#define YUKON_TIR 0x0044
|
||||
|
||||
#define YU_TIR_OUT_UNICAST 0x0001 /* Num Unicast Packets Transmitted */
|
||||
#define YU_TIR_OUT_BROADCAST 0x0002 /* Num Broadcast Packets Transmitted */
|
||||
#define YU_TIR_OUT_PAUSE 0x0004 /* Num Pause Packets Transmitted */
|
||||
#define YU_TIR_OUT_MULTICAST 0x0008 /* Num Multicast Packets Transmitted */
|
||||
#define YU_TIR_OUT_OCTETS 0x0030 /* Num Bytes Transmitted */
|
||||
#define YU_TIR_OUT_64_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_127_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_255_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_511_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_1023_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_1518_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_MAX_OCTETS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_SPARE 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_COLLISIONS 0x0000 /* Num Packets Transmitted */
|
||||
#define YU_TIR_OUT_LATE 0x0000 /* Num Packets Transmitted */
|
||||
|
||||
/* Receive Interrupt Register (RIR) */
|
||||
#define YUKON_RIR 0x0048
|
||||
|
||||
/* Transmit and Receive Interrupt Register (TRIR) */
|
||||
#define YUKON_TRIR 0x004c
|
||||
|
||||
/* Transmit Interrupt Mask Register (TIMR) */
|
||||
#define YUKON_TIMR 0x0050
|
||||
|
||||
/* Receive Interrupt Mask Register (RIMR) */
|
||||
#define YUKON_RIMR 0x0054
|
||||
|
||||
/* Transmit and Receive Interrupt Mask Register (TRIMR) */
|
||||
#define YUKON_TRIMR 0x0058
|
||||
|
||||
/* SMI Control Register (SMICR) */
|
||||
#define YUKON_SMICR 0x0080
|
||||
|
||||
#define YU_SMICR_PHYAD(x) (((x) & 0x1f) << 11)
|
||||
#define YU_SMICR_REGAD(x) (((x) & 0x1f) << 6)
|
||||
#define YU_SMICR_OPCODE 0x0020 /* opcode (0 - write, 1 - read) */
|
||||
#define YU_SMICR_OP_READ 0x0020 /* opcode read */
|
||||
#define YU_SMICR_OP_WRITE 0x0000 /* opcode write */
|
||||
#define YU_SMICR_READ_VALID 0x0010 /* read valid */
|
||||
#define YU_SMICR_BUSY 0x0008 /* busy (writing) */
|
||||
|
||||
/* SMI Data Register (SMIDR) */
|
||||
#define YUKON_SMIDR 0x0084
|
||||
|
||||
/* PHY Addres Register (PAR) */
|
||||
#define YUKON_PAR 0x0088
|
||||
|
||||
#define YU_PAR_MIB_CLR 0x0020 /* MIB Counters Clear Mode */
|
||||
#define YU_PAR_LOAD_TSTCNT 0x0010 /* Load count 0xfffffff0 into cntr */
|
||||
Loading…
Reference in New Issue
Block a user