d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

- Add $netif_ipexpand_max to specify the upper limit for the number of

Browse Source 
addresses generated by an address range specification.  The default
  value is 2048.  This can be increased by setting $netif_ipexpand_max
  in rc.conf.

- Fix warning messages when an address range spec exceeds the upper limit.

PR:	186841
This commit is contained in:
hrs 2014-09-11 12:30:29 +00:00
parent 0808eece71
commit 9e4c2e6032
3 changed files with 19 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
etc/defaults/rc.conf
View File

@ -110,6 +110,7 @@ synchronous_dhclient="NO" # Start dhclient directly on configured
# interfaces during startup.
defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
wpa_supplicant_program="/usr/sbin/wpa_supplicant"
wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"

12
etc/network.subr
View File

@ -25,9 +25,7 @@
# $FreeBSD$
#
IFCONFIG_CMD="/sbin/ifconfig"
# Maximum number of addresses expanded from a address range specification.
_IPEXPANDMAX=31
: ${netif_ipexpand_max:=2048}
#
# Subroutines commonly used from network startup scripts.
@ -886,8 +884,8 @@ ifalias_expand_addr_inet()
_ipcount=$_iplow
while [ "$_ipcount" -le "$_iphigh" ]; do
_retstr="${_retstr} ${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail}${_plen:+/}${_plen}"
if [ $_ipcount -gt $(($_iplow + $_IPEXPANDMAX)) ]; then
warn "Range specification is too large (${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_iphigh}${_iptail:+.}${_iptail}). ${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail} was processed."
if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]; then
warn "Range specification is too large (${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_iphigh}${_iptail:+.}${_iptail}). ${_iphead}${_iphead:+.}${_iplow}${_iptail:+.}${_iptail}-${_iphead}${_iphead:+.}${_ipcount}${_iptail:+.}${_iptail} was processed. Increase \$netif_ipexpand_max in rc.conf."
break
else
_ipcount=$(($_ipcount + 1))
@ -976,9 +974,9 @@ ifalias_expand_addr_inet6()
$_ipleft $_ipcount $_ipright \
${_plen:+/}$_plen`
_retstr="$_retstr $_r"
if [ $_ipcount -gt $(($_iplow + $_IPEXPANDMAX)) ]
if [ $_ipcount -gt $(($_iplow + $netif_ipexpand_max)) ]
then
warn "Range specification is too large $(printf '(%s:%04x%s-%s:%04x%s)' $_ipleft $_iplow $_ipright $_ipleft $_iphigh $_ipright). $(printf '%s:%04x%s-%s:%04x%s' $_ipleft $_iplow $_ipright $_ipleft $_ipcount $_ipright) was processed."
warn "Range specification is too large $(printf '(%s:%x%s-%s:%x%s)' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_iphigh" "$_ipright"). $(printf '%s:%x%s-%s:%x%s' "$_ipleft" "$_iplow" "$_ipright" "$_ipleft" "$_ipcount" "$_ipright") was processed. Increase \$netif_ipexpand_max in rc.conf."
break
else
_ipcount=$(($_ipcount + 1))

13
share/man/man5/rc.conf.5
View File

@ -1199,6 +1199,19 @@ or
.Li inet6 2001:db8:1-f::1/64 .
This notation allows address and prefix length part only,
not the other address modifiers.
Note that the maximum number of the generated addresses from a range
specification is limited to an integer value specified in
.Va netif_ipexpand_max
in
.Xr rc.conf 5
because a small typo can unexpectedly generate a large number of addresses.
The default value is
.Li 2048 .
It can be increased by adding the following line into
.Xr rc.conf 5 :
.Bd -literal
netif_ipexpand_max="4096"
.Ed
.Pp
In the case of
.Li 192.0.2.5-23/24 ,