d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Minor updates to the Broadcom XLP NAE driver

Browse Source 
Remove unnecessary SGMII initialization code from nae.c. While there
clean up some prints and whitespace.
This commit is contained in:
Jayachandran C. 2013-01-24 14:42:58 +00:00
parent 301b961c3e
commit a10ce85526
2 changed files with 11 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
sys/mips/nlm/dev/net/nae.c
View File

@ -1427,9 +1427,8 @@ nlm_nae_open_if(uint64_t nae_base, int nblock, int port_type,
int port, uint32_t desc_size)
{
uint32_t netwk_inf;
uint32_t mac_cfg1, mac_cfg2, netior_ctrl3;
int iface, speed, duplex, ifmode;
int iface_ctrl_reg, iface_ctrl3_reg, conf1_reg, conf2_reg;
uint32_t mac_cfg1, netior_ctrl3;
int iface, iface_ctrl_reg, iface_ctrl3_reg, conf1_reg, conf2_reg;
switch (port_type) {
case XAUIC:
@ -1487,6 +1486,7 @@ nlm_nae_open_if(uint64_t nae_base, int nblock, int port_type,
/* clear gmac reset */
mac_cfg1 = nlm_read_nae_reg(nae_base, conf1_reg);
nlm_write_nae_reg(nae_base, conf1_reg, mac_cfg1 & ~(1 << 31));
/* clear speed debug bit */
iface_ctrl3_reg = SGMII_NET_IFACE_CTRL3(nblock, iface);
netior_ctrl3 = nlm_read_nae_reg(nae_base, iface_ctrl3_reg);
@ -1500,33 +1500,21 @@ nlm_nae_open_if(uint64_t nae_base, int nblock, int port_type,
nlm_write_nae_reg(nae_base, iface_ctrl_reg,
netwk_inf & ~(0x1 << 2));
/* setup defaults */ /* XXXJC: take defaults from sc? */
speed = 2;
duplex = 1;
ifmode = 0x2;
netwk_inf = nlm_read_nae_reg(nae_base, iface_ctrl_reg);
netwk_inf &= ~(0x3);
nlm_write_nae_reg(nae_base, iface_ctrl_reg,
netwk_inf | (speed & 0x3));
mac_cfg2 = nlm_read_nae_reg(nae_base, conf2_reg);
mac_cfg2 &= ~(0x3 << 8);
nlm_write_nae_reg(nae_base, conf2_reg,
mac_cfg2 |
((ifmode & 0x3) << 8) | /* interface mode */
(duplex & 0x1));
/* clear stats counters */
netwk_inf = nlm_read_nae_reg(nae_base, iface_ctrl_reg);
nlm_write_nae_reg(nae_base, iface_ctrl_reg,
netwk_inf | (1 << 15));
/* enable stats counters */
netwk_inf = nlm_read_nae_reg(nae_base, iface_ctrl_reg);
nlm_write_nae_reg(nae_base, iface_ctrl_reg,
(netwk_inf & ~(1 << 15)) | (1 << 16));
/* flow control? */
mac_cfg1 = nlm_read_nae_reg(nae_base, conf1_reg);
nlm_write_nae_reg(nae_base, conf1_reg,
mac_cfg1 | (0x3 << 4));
break;
break;
}
nlm_nae_init_ingress(nae_base, desc_size);

8
sys/mips/nlm/dev/net/xlpge.c
View File

@ -1364,13 +1364,13 @@ nlm_xlpge_mii_statchg(device_t dev)
if (mii->mii_media_status & IFM_ACTIVE) {
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) {
sc->speed = NLM_SGMII_SPEED_10;
speed = "10-Mbps";
speed = "10Mbps";
} else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
sc->speed = NLM_SGMII_SPEED_100;
speed = "100-Mbps";
speed = "100Mbps";
} else { /* default to 1G */
sc->speed = NLM_SGMII_SPEED_1000;
speed = "1-Gbps";
speed = "1Gbps";
}
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
@ -1381,7 +1381,7 @@ nlm_xlpge_mii_statchg(device_t dev)
duplexity = "half";
}
printf("Setup [complex=%d, port=%d] with speed=%s duplex=%s\n",
printf("Port [%d, %d] setup with speed=%s duplex=%s\n",
sc->block, sc->port, speed, duplexity);
nlm_nae_setup_mac(sc->base_addr, sc->block, sc->port, 0, 1, 1,