Bring over the new aggregate statistics from the 11n branch.
Some of these values are currently updated by the driver (the 11n RX related statistics) so they are immediately useful.
This commit is contained in:
adrian
parent
c253b28f92
commit
a181a3a832
@ -49,18 +49,10 @@
|
||||
#include <unistd.h>
|
||||
#include <err.h>
|
||||
|
||||
/* Use the system net80211 headers, rather than the kernel tree */
|
||||
/*
|
||||
* XXX this means that if you build a separate net80211 stack
|
||||
* XXX with your kernel and don't install the new/changed headers,
|
||||
* XXX this tool may break.
|
||||
* XXX -adrian
|
||||
*/
|
||||
#include <net80211/ieee80211_ioctl.h>
|
||||
#include <net80211/ieee80211_radiotap.h>
|
||||
|
||||
#include "ah.h"
|
||||
#include "ah_desc.h"
|
||||
#include "net80211/ieee80211_ioctl.h"
|
||||
#include "net80211/ieee80211_radiotap.h"
|
||||
#include "if_athioctl.h"
|
||||
|
||||
#include "athstats.h"
|
||||
@ -256,8 +248,46 @@ static const struct fmt athstats[] = {
|
||||
{ 5, "txrawfail", "txrawfail", "raw tx failed 'cuz interface/hw down" },
|
||||
#define S_RX_TOOBIG AFTER(S_TX_RAW_FAIL)
|
||||
{ 5, "rx2big", "rx2big", "rx failed 'cuz frame too large" },
|
||||
#define S_RX_AGG AFTER(S_RX_TOOBIG)
|
||||
{ 5, "rxagg", "rxagg", "A-MPDU sub-frames received" },
|
||||
#define S_RX_HALFGI AFTER(S_RX_AGG)
|
||||
{ 5, "rxhalfgi", "rxhgi", "Half-GI frames received" },
|
||||
#define S_RX_2040 AFTER(S_RX_HALFGI)
|
||||
{ 6, "rx2040", "rx2040", "40MHz frames received" },
|
||||
#define S_RX_PRE_CRC_ERR AFTER(S_RX_2040)
|
||||
{ 11, "rxprecrcerr", "rxprecrcerr", "CRC errors for non-last A-MPDU subframes" },
|
||||
#define S_RX_POST_CRC_ERR AFTER(S_RX_PRE_CRC_ERR)
|
||||
{ 12, "rxpostcrcerr", "rxpostcrcerr", "CRC errors for last subframe in an A-MPDU" },
|
||||
#define S_RX_DECRYPT_BUSY_ERR AFTER(S_RX_POST_CRC_ERR)
|
||||
{ 10, "rxdescbusy", "rxdescbusy", "Decryption engine busy" },
|
||||
#define S_RX_HI_CHAIN AFTER(S_RX_DECRYPT_BUSY_ERR)
|
||||
{ 4, "rxhi", "rxhi", "Frames received with RX chain in high power mode" },
|
||||
#define S_TX_HTPROTECT AFTER(S_RX_HI_CHAIN)
|
||||
{ 7, "txhtprot", "txhtprot", "Frames transmitted with HT Protection" },
|
||||
#define S_RX_QEND AFTER(S_TX_HTPROTECT)
|
||||
{ 7, "rxquend", "rxquend", "Hit end of RX descriptor queue" },
|
||||
#define S_TX_TIMEOUT AFTER(S_RX_QEND)
|
||||
{ 4, "txtimeout", "TXTX", "TX Timeout" },
|
||||
#define S_TX_CSTIMEOUT AFTER(S_TX_TIMEOUT)
|
||||
{ 4, "csttimeout", "CSTX", "Carrier Sense Timeout" },
|
||||
#define S_TX_XTXOP_ERR AFTER(S_TX_CSTIMEOUT)
|
||||
{ 5, "xtxoperr", "TXOPX", "TXOP exceed" },
|
||||
#define S_TX_TIMEREXPIRED_ERR AFTER(S_TX_XTXOP_ERR)
|
||||
{ 7, "texperr", "texperr", "TX Timer expired" },
|
||||
#define S_TX_DESCCFG_ERR AFTER(S_TX_TIMEREXPIRED_ERR)
|
||||
{ 10, "desccfgerr", "desccfgerr", "TX descriptor error" },
|
||||
#define S_TX_SWRETRIES AFTER(S_TX_DESCCFG_ERR)
|
||||
{ 9, "txswretry", "txswretry", "Number of frames retransmitted in software" },
|
||||
#define S_TX_SWRETRIES_MAX AFTER(S_TX_SWRETRIES)
|
||||
{ 7, "txswmax", "txswmax", "Number of frames exceeding software retry" },
|
||||
#define S_TX_DATA_UNDERRUN AFTER(S_TX_SWRETRIES_MAX)
|
||||
{ 5, "txdataunderrun", "TXDAU", "A-MPDU TX FIFO data underrun" },
|
||||
#define S_TX_DELIM_UNDERRUN AFTER(S_TX_DATA_UNDERRUN)
|
||||
{ 5, "txdelimunderrun", "TXDEU", "A-MPDU TX Delimiter underrun" },
|
||||
#define S_TX_AGGR_FAIL AFTER(S_TX_DELIM_UNDERRUN)
|
||||
{ 10, "txaggrfail", "txaggrfail", "A-MPDU TX attempt failed" },
|
||||
#ifndef __linux__
|
||||
#define S_CABQ_XMIT AFTER(S_RX_TOOBIG)
|
||||
#define S_CABQ_XMIT AFTER(S_TX_AGGR_FAIL)
|
||||
{ 5, "cabxmit", "cabxmit", "cabq frames transmitted" },
|
||||
#define S_CABQ_BUSY AFTER(S_CABQ_XMIT)
|
||||
{ 5, "cabqbusy", "cabqbusy", "cabq xmit overflowed beacon interval" },
|
||||
@ -269,7 +299,7 @@ static const struct fmt athstats[] = {
|
||||
{ 5, "rxbusdma", "rxbusdma", "rx setup failed for dma resrcs" },
|
||||
#define S_FF_TXOK AFTER(S_RX_BUSDMA)
|
||||
#else
|
||||
#define S_FF_TXOK AFTER(S_RX_PHY_UNDERRUN)
|
||||
#define S_FF_TXOK AFTER(S_TX_AGGR_FAIL)
|
||||
#endif
|
||||
{ 5, "fftxok", "fftxok", "fast frames xmit successfully" },
|
||||
#define S_FF_TXERR AFTER(S_FF_TXOK)
|
||||
@ -384,12 +414,16 @@ static const struct fmt athstats[] = {
|
||||
{ 4, "asignal", "asig", "signal of last ack (dBm)" },
|
||||
#define S_RX_SIGNAL AFTER(S_TX_SIGNAL)
|
||||
{ 4, "signal", "sig", "avg recv signal (dBm)" },
|
||||
|
||||
};
|
||||
#define S_PHY_MIN S_RX_PHY_UNDERRUN
|
||||
#define S_PHY_MAX S_RX_PHY_CCK_RESTART
|
||||
#define S_LAST S_ANT_TX0
|
||||
#define S_MAX S_ANT_RX7+1
|
||||
|
||||
/*
|
||||
* XXX fold this into the external HAL definitions! -adrian
|
||||
*/
|
||||
struct _athstats {
|
||||
struct ath_stats ath;
|
||||
#ifdef ATH_SUPPORT_ANI
|
||||
@ -723,6 +757,25 @@ ath_get_curstat(struct statfoo *sf, int s, char b[], size_t bs)
|
||||
snprintf(b, bs, "%d",
|
||||
wf->cur.ath.ast_rx_rssi + wf->cur.ath.ast_rx_noise);
|
||||
return 1;
|
||||
case S_RX_AGG: STAT(rx_agg);
|
||||
case S_RX_HALFGI: STAT(rx_halfgi);
|
||||
case S_RX_2040: STAT(rx_2040);
|
||||
case S_RX_PRE_CRC_ERR: STAT(rx_pre_crc_err);
|
||||
case S_RX_POST_CRC_ERR: STAT(rx_post_crc_err);
|
||||
case S_RX_DECRYPT_BUSY_ERR: STAT(rx_decrypt_busy_err);
|
||||
case S_RX_HI_CHAIN: STAT(rx_hi_rx_chain);
|
||||
case S_TX_HTPROTECT: STAT(tx_htprotect);
|
||||
case S_RX_QEND: STAT(rx_hitqueueend);
|
||||
case S_TX_TIMEOUT: STAT(tx_timeout);
|
||||
case S_TX_CSTIMEOUT: STAT(tx_cst);
|
||||
case S_TX_XTXOP_ERR: STAT(tx_xtxop);
|
||||
case S_TX_TIMEREXPIRED_ERR: STAT(tx_timerexpired);
|
||||
case S_TX_DESCCFG_ERR: STAT(tx_desccfgerr);
|
||||
case S_TX_SWRETRIES: STAT(tx_swretries);
|
||||
case S_TX_SWRETRIES_MAX: STAT(tx_swretrymax);
|
||||
case S_TX_DATA_UNDERRUN: STAT(tx_data_underrun);
|
||||
case S_TX_DELIM_UNDERRUN: STAT(tx_delim_underrun);
|
||||
case S_TX_AGGR_FAIL: STAT(tx_aggrfail);
|
||||
}
|
||||
b[0] = '\0';
|
||||
return 0;
|
||||
@ -943,7 +996,27 @@ ath_get_totstat(struct statfoo *sf, int s, char b[], size_t bs)
|
||||
snprintf(b, bs, "%d",
|
||||
wf->total.ath.ast_rx_rssi + wf->total.ath.ast_rx_noise);
|
||||
return 1;
|
||||
case S_RX_AGG: STAT(rx_agg);
|
||||
case S_RX_HALFGI: STAT(rx_halfgi);
|
||||
case S_RX_2040: STAT(rx_2040);
|
||||
case S_RX_PRE_CRC_ERR: STAT(rx_pre_crc_err);
|
||||
case S_RX_POST_CRC_ERR: STAT(rx_post_crc_err);
|
||||
case S_RX_DECRYPT_BUSY_ERR: STAT(rx_decrypt_busy_err);
|
||||
case S_RX_HI_CHAIN: STAT(rx_hi_rx_chain);
|
||||
case S_TX_HTPROTECT: STAT(tx_htprotect);
|
||||
case S_RX_QEND: STAT(rx_hitqueueend);
|
||||
case S_TX_TIMEOUT: STAT(tx_timeout);
|
||||
case S_TX_CSTIMEOUT: STAT(tx_cst);
|
||||
case S_TX_XTXOP_ERR: STAT(tx_xtxop);
|
||||
case S_TX_TIMEREXPIRED_ERR: STAT(tx_timerexpired);
|
||||
case S_TX_DESCCFG_ERR: STAT(tx_desccfgerr);
|
||||
case S_TX_SWRETRIES: STAT(tx_swretries);
|
||||
case S_TX_SWRETRIES_MAX: STAT(tx_swretrymax);
|
||||
case S_TX_DATA_UNDERRUN: STAT(tx_data_underrun);
|
||||
case S_TX_DELIM_UNDERRUN: STAT(tx_delim_underrun);
|
||||
case S_TX_AGGR_FAIL: STAT(tx_aggrfail);
|
||||
}
|
||||
|
||||
b[0] = '\0';
|
||||
return 0;
|
||||
#undef RXANT
|
||||
|
||||
Loading…
Reference in New Issue
Block a user