mdoc(7) police:
Do not use raw roff requests. Replace tbl(1)'s use with the mdoc(7)'s -column list. Removed cross references to non-existing manpages. Minor markup nits.
This commit is contained in:
parent
29507f4943
commit
b5544fefe9
@ -36,7 +36,7 @@
|
||||
.Os
|
||||
.Sh NAME
|
||||
.Nm wi
|
||||
.Nd WaveLAN/IEEE, PRISM-II and Spectrum24 802.11DS wireless network driver
|
||||
.Nd "WaveLAN/IEEE, PRISM-II and Spectrum24 802.11DS wireless network driver"
|
||||
.Sh SYNOPSIS
|
||||
.Cd "device wi"
|
||||
.Sh DESCRIPTION
|
||||
@ -89,9 +89,9 @@ ignored and stations can communicate amongst themselves without the
|
||||
aid of an access point.
|
||||
Note that there are two possible point-to-point modes.
|
||||
One mode, referred to as
|
||||
.Dq ad-hoc demo mode ,
|
||||
.Dq "ad-hoc demo mode" ,
|
||||
or
|
||||
.Dq legacy Lucent ad-hoc mode ,
|
||||
.Dq "legacy Lucent ad-hoc mode" ,
|
||||
predates the IEEE 802.11 specification and so may not interoperate
|
||||
with cards from different vendors.
|
||||
The standardized point-to-point mode, is called IBSS (or confusingly
|
||||
@ -99,7 +99,7 @@ just ad-hoc mode), but is not supported by cards with very old
|
||||
firmware revisions.
|
||||
If your cards supports IBSS mode, it is recommended that you use it in
|
||||
preference to the
|
||||
.Dq ad-hoc demo mode
|
||||
.Dq "ad-hoc demo mode"
|
||||
in new installations.
|
||||
.Pp
|
||||
Cards based on the Intersil PRISM-II and PRISM-2.5 chips also
|
||||
@ -126,7 +126,7 @@ A true PCMCIA bridge (such as those sold by Lucent) will attach
|
||||
as a real PCMCIA controller.
|
||||
The wireless card will then attach to the PCMCIA bus.
|
||||
Wireless cards in PCMCIA slots may be inserted and ejected on the fly.
|
||||
.br
|
||||
.Pp
|
||||
A dumb bridge, on the other hand, does not show up as a true PCMCIA bus.
|
||||
The wireless card will simply appear to the host as a normal PCI
|
||||
device and will not require any PCMCIA support.
|
||||
@ -137,62 +137,56 @@ The following cards are among those supported by the
|
||||
.Nm
|
||||
driver:
|
||||
.Pp
|
||||
.in +\n(dIu
|
||||
.TS
|
||||
tab (:) ;
|
||||
l l l
|
||||
_ _ _
|
||||
l l l .
|
||||
Card:Chip:Bus
|
||||
3Com AirConnect 3CRWE737A:Spectrum24:PCMCIA
|
||||
3Com AirConnect 3CRWE777A:Prism-II:PCI
|
||||
ACTIONTEC HWC01170:Prism-2.5:PCMCIA
|
||||
Addtron AWP-100:Prism-II:PCMCIA
|
||||
Agere Orinoco:Hermes:PCMCIA
|
||||
Buffalo AirStation:Prism-II:PCMCIA
|
||||
Buffalo AirStation:Prism-II:CF
|
||||
Cabletron RoamAbout:Hermes:PCMCIA
|
||||
Compaq Agency NC5004:Prism-II:PCMCIA
|
||||
Contec FLEXLAN/FX-DS110-PCC:Prism-II:PCMCIA
|
||||
Corega PCC-11:Prism-II:PCMCIA
|
||||
Corega PCCA-11:Prism-II:PCMCIA
|
||||
Corega PCCB-11:Prism-II:PCMCIA
|
||||
Corega CGWLPCIA11:Prism-II:PCI
|
||||
Dlink DWL520:Prism-2.5:PCI
|
||||
Dlink DWL650:Prism-2.5:PCMCIA
|
||||
ELSA XI300:Prism-II:PCMCIA
|
||||
ELSA XI800:Prism-II:CF
|
||||
EMTAC A2424i:Prism-II:PCMCIA
|
||||
Ericsson Wireless LAN CARD C11:Spectrum24:PCMCIA
|
||||
Gemtek WL-311:Prism-2.5:PCMCIA
|
||||
Hawking Technology WE110P:Prism-2.5:PCMCIA
|
||||
I-O DATA WN-B11/PCM:Prism-II:PCMCIA
|
||||
Intel PRO/Wireless 2011:Spectrum24:PCMCIA
|
||||
Intersil Prism II:Prism-II:PCMCIA
|
||||
Intersil Mini-PCI:Prism-2.5:PCI
|
||||
Linksys Instant Wireless WPC11:Prism-II:PCMCIA
|
||||
Linksys Instant Wireless WPC11 2.5:Prism-2.5:PCMCIA
|
||||
Lucent WaveLAN:Hermes:PCMCIA
|
||||
NANOSPEED ROOT-RZ2000:Prism-II:PCMCIA
|
||||
NDC/Sohoware NCP130:Prism-II:PCI
|
||||
NEC CMZ-RT-WP:Prism-II:PCMCIA
|
||||
Netgear MA401:Prism-II:PCMCIA
|
||||
NTT-ME 11Mbps Wireless LAN:Prism-II:PCMCIA
|
||||
Proxim RangeLAN-DS:Prism-II:PCMCIA
|
||||
Samsung MagicLAN SWL-2000N:Prism-II:PCMCIA
|
||||
Socket Low Power WLAN-CF:Prism-II:CF
|
||||
SMC 2602 EZ Connect (3.3V):Prism-II:PCI or PCMCIA
|
||||
SMC 2632 EZ Connect:Prism-II:PCMCIA
|
||||
Symbol Spectrum24:Spectrum24:PCMCIA
|
||||
TDK LAK-CD011WL:Prism-II:PCMCIA
|
||||
.TE
|
||||
.in -\n(dIu
|
||||
.Bl -column -compact "Linksys Instant Wireless WPC11 2.5" "Spectrum24" "PCI or PCMCIA"
|
||||
.Em "Card Chip Bus"
|
||||
3Com AirConnect 3CRWE737A Spectrum24 PCMCIA
|
||||
3Com AirConnect 3CRWE777A Prism-II PCI
|
||||
ACTIONTEC HWC01170 Prism-2.5 PCMCIA
|
||||
Addtron AWP-100 Prism-II PCMCIA
|
||||
Agere Orinoco Hermes PCMCIA
|
||||
Buffalo AirStation Prism-II PCMCIA
|
||||
Buffalo AirStation Prism-II CF
|
||||
Cabletron RoamAbout Hermes PCMCIA
|
||||
Compaq Agency NC5004 Prism-II PCMCIA
|
||||
Contec FLEXLAN/FX-DS110-PCC Prism-II PCMCIA
|
||||
Corega PCC-11 Prism-II PCMCIA
|
||||
Corega PCCA-11 Prism-II PCMCIA
|
||||
Corega PCCB-11 Prism-II PCMCIA
|
||||
Corega CGWLPCIA11 Prism-II PCI
|
||||
Dlink DWL520 Prism-2.5 PCI
|
||||
Dlink DWL650 Prism-2.5 PCMCIA
|
||||
ELSA XI300 Prism-II PCMCIA
|
||||
ELSA XI800 Prism-II CF
|
||||
EMTAC A2424i Prism-II PCMCIA
|
||||
Ericsson Wireless LAN CARD C11 Spectrum24 PCMCIA
|
||||
Gemtek WL-311 Prism-2.5 PCMCIA
|
||||
Hawking Technology WE110P Prism-2.5 PCMCIA
|
||||
I-O DATA WN-B11/PCM Prism-II PCMCIA
|
||||
Intel PRO/Wireless 2011 Spectrum24 PCMCIA
|
||||
Intersil Prism II Prism-II PCMCIA
|
||||
Intersil Mini-PCI Prism-2.5 PCI
|
||||
Linksys Instant Wireless WPC11 Prism-II PCMCIA
|
||||
Linksys Instant Wireless WPC11 2.5 Prism-2.5 PCMCIA
|
||||
Lucent WaveLAN Hermes PCMCIA
|
||||
NANOSPEED ROOT-RZ2000 Prism-II PCMCIA
|
||||
NDC/Sohoware NCP130 Prism-II PCI
|
||||
NEC CMZ-RT-WP Prism-II PCMCIA
|
||||
Netgear MA401 Prism-II PCMCIA
|
||||
NTT-ME 11Mbps Wireless LAN Prism-II PCMCIA
|
||||
Proxim RangeLAN-DS Prism-II PCMCIA
|
||||
Samsung MagicLAN SWL-2000N Prism-II PCMCIA
|
||||
Socket Low Power WLAN-CF Prism-II CF
|
||||
SMC 2602 EZ Connect (3.3V) Prism-II PCI or PCMCIA
|
||||
SMC 2632 EZ Connect Prism-II PCMCIA
|
||||
Symbol Spectrum24 Spectrum24 PCMCIA
|
||||
TDK LAK-CD011WL Prism-II PCMCIA
|
||||
.El
|
||||
.Pp
|
||||
Several vendors sell PCI adapters built around the PLX Technology 9050
|
||||
or 9052 chip.
|
||||
The following such adapters are supported or expected to work:
|
||||
.Pp
|
||||
.Bl -tag -width -compact
|
||||
.Bl -tag -compact
|
||||
.It 3Com AirConnect 3CRWE777A (3.3V)
|
||||
.It Belkin F5D6000 (a rebadged WL11000P)
|
||||
.It Eumitcom WL11000P
|
||||
@ -202,7 +196,6 @@ The following such adapters are supported or expected to work:
|
||||
.It Netgear MA301
|
||||
.It US Robotics 2415 (rebadged WL11000P)
|
||||
.El
|
||||
.Pp
|
||||
.Sh EXAMPLES
|
||||
The following examples utilize
|
||||
.Xr ifconfig 8
|
||||
@ -211,64 +204,72 @@ for simplicity, however,
|
||||
can also be used to set wireless parameters.
|
||||
.Pp
|
||||
Join an existing BSS network (ie: connect to an access point):
|
||||
.Dl # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00
|
||||
.Pp
|
||||
.Dl "ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00"
|
||||
.Pp
|
||||
Join a specific BSS network with network name
|
||||
.Dq my_net .
|
||||
.Dl # ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net
|
||||
.br
|
||||
.Dq Li my_net :
|
||||
.Pp
|
||||
.Dl "ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"
|
||||
.Pp
|
||||
Join a specific BSS network with WEP encryption:
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
wepkey 0x8736639624
|
||||
.Ed
|
||||
.Pp
|
||||
Join a Lucent legacy demo ad-hoc network with network name
|
||||
.Dq my_net .
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
.Dq Li my_net :
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
mediaopt adhoc
|
||||
.Ed
|
||||
.Pp
|
||||
Create an IBSS network with network name
|
||||
.Dq my_net .
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
.Dq Li my_net :
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \e
|
||||
mediaopt ibss-master
|
||||
.Ed
|
||||
Note: The infrastructure for mediaopt ibss-master has not been
|
||||
committed yet.
|
||||
.Pp
|
||||
.Em Note :
|
||||
The infrastructure for
|
||||
.Cm mediaopt ibss-master
|
||||
has not been committed yet.
|
||||
.Pp
|
||||
Join an IBSS network with network name
|
||||
.Dq my_net .
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.22 netmask 0xffffff00 ssid my_net \e
|
||||
.Dq Li my_net :
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.22 netmask 0xffffff00 ssid my_net \e
|
||||
mediaopt ibss
|
||||
.Ed
|
||||
Note: The infrastructure for mediaopt ibss has not been
|
||||
committed yet.
|
||||
.Pp
|
||||
.Em Note :
|
||||
The infrastructure for
|
||||
.Cm mediaopt ibss
|
||||
has not been committed yet.
|
||||
.Pp
|
||||
Create a host-based access point (Prism only):
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
|
||||
mediaopt hostap
|
||||
.Ed
|
||||
.Pp
|
||||
Create a host-based access point with WEP enabled (Prism only):
|
||||
.Bd -literal -compact -offset indent
|
||||
# ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
|
||||
.Bd -literal -offset indent
|
||||
ifconfig wi0 inet 192.168.0.10 netmask 0xffffff00 ssid my_ap \e
|
||||
wepkey 0x1234567890 mediaopt hostap
|
||||
.Ed
|
||||
.Pp
|
||||
Create a host-based wireless bridge to fxp0 (Prism only):
|
||||
.Bd -literal -compact -offset indent
|
||||
.Bd -literal -offset indent
|
||||
Add BRIDGE to the kernel config.
|
||||
# ifconfig wi0 inet up ssid my_ap mediaopt hostap
|
||||
# sysctl net.link.ether.bridge=1
|
||||
# sysctl net.link.ether.bridge_cfg="wi0 fxp0"
|
||||
# sysctl net.inet.ip.forwarding=1
|
||||
ifconfig wi0 inet up ssid my_ap mediaopt hostap
|
||||
sysctl net.link.ether.bridge=1
|
||||
sysctl net.link.ether.bridge_cfg="wi0 fxp0"
|
||||
sysctl net.inet.ip.forwarding=1
|
||||
.Ed
|
||||
.Pp
|
||||
This will give you approximately the same functionality as an access
|
||||
point.
|
||||
.Sh DIAGNOSTICS
|
||||
@ -287,8 +288,6 @@ command.
|
||||
.Xr an 4 ,
|
||||
.Xr arp 4 ,
|
||||
.Xr netintro 4 ,
|
||||
.Xr ifmedia 4 ,
|
||||
.Xr hostname.if 5 ,
|
||||
.Xr ifconfig 8 ,
|
||||
.Xr wicontrol 8
|
||||
.Rs
|
||||
@ -303,7 +302,8 @@ device driver first appeared in
|
||||
.Sh AUTHORS
|
||||
The
|
||||
.Nm
|
||||
driver was written by Bill Paul <wpaul@ctr.columbia.edu>.
|
||||
driver was written by
|
||||
.An Bill Paul Aq wpaul@ctr.columbia.edu .
|
||||
This man page comes from
|
||||
.Ox .
|
||||
.Sh CAVEATS
|
||||
|
Loading…
Reference in New Issue
Block a user