Include device rt in RT305X config and little cleanup.
Approved by: adrian (mentor)
This commit is contained in:
Aleksandr Rybalko
parent
e293d08775
commit
b5bed41c6c
@ -24,42 +24,34 @@ makeoptions MIPS_LITTLE_ENDIAN=defined
|
||||
makeoptions KERNLOADADDR=0x80001000
|
||||
|
||||
# Don't build any modules yet.
|
||||
makeoptions MODULES_OVERRIDE="wlan_xauth wlan_wep wlan_tkip wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt random if_bridge bridgestp msdosfs md ipfw dummynet libalias geom/geom_label ufs usb/uplcom usb/u3g usb/umodem usb/umass usb/ucom cam zlib"
|
||||
makeoptions MODULES_OVERRIDE="if_bridge bridgestp md ipfw dummynet libalias geom/geom_label zlib"
|
||||
makeoptions RT3052F
|
||||
|
||||
include "../rt305x/std.rt305x"
|
||||
|
||||
hints "RT305X.hints" #Default places to look for devices.
|
||||
|
||||
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
|
||||
# Debugging for use in -current
|
||||
#options DEADLKRES #Enable the deadlock resolver
|
||||
#options INVARIANTS #Enable calls of extra sanity checking
|
||||
#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
|
||||
#options WITNESS #Enable checks to detect deadlocks and cycles
|
||||
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
|
||||
#options DIAGNOSTIC
|
||||
#options DEBUG_LOCKS
|
||||
#options DEBUG_VFS_LOCKS
|
||||
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||||
#options DEADLKRES #Enable the deadlock resolver
|
||||
#options INVARIANTS #Enable calls of extra sanity checking
|
||||
#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
|
||||
#options WITNESS #Enable checks to detect deadlocks and cycles
|
||||
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
|
||||
#options DIAGNOSTIC
|
||||
#options DEBUG_LOCKS
|
||||
#options DEBUG_VFS_LOCKS
|
||||
#options GDB
|
||||
options DDB
|
||||
options DDB
|
||||
options KDB
|
||||
|
||||
options SCHED_ULE
|
||||
#options SCHED_4BSD #4BSD scheduler
|
||||
#options COMPAT_43
|
||||
options INET #InterNETworking
|
||||
options NFSCL #Network Filesystem Client
|
||||
options NFS_ROOT #NFS usable as /, requires NFSCL
|
||||
options PSEUDOFS #Pseudo-filesystem framework
|
||||
#options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
|
||||
|
||||
options BOOTP
|
||||
#options BOOTP_NFSROOT
|
||||
options BOOTP_NFSV3
|
||||
options BOOTP_WIRED_TO=rt0
|
||||
options BOOTP_COMPAT
|
||||
options CD9660 # ISO 9660 Filesystem
|
||||
options ROOTDEVNAME=\"cd9660:/dev/map/rootfs.uncompress\"
|
||||
options TMPFS # TMP Memory Filesystem
|
||||
@ -68,6 +60,15 @@ options TMPFS # TMP Memory Filesystem
|
||||
#options SOFTUPDATES #Enable FFS soft updates support
|
||||
#options UFS_ACL #Support for access control lists
|
||||
#options UFS_DIRHASH #Improve performance on big directories
|
||||
|
||||
# BOOTP/NFS boot
|
||||
#options BOOTP
|
||||
#options BOOTP_NFSROOT
|
||||
#options BOOTP_NFSV3
|
||||
#options BOOTP_WIRED_TO=rt0
|
||||
#options BOOTP_COMPAT
|
||||
#options NFSCL #Network Filesystem Client
|
||||
#options NFS_ROOT #NFS usable as /, requires NFSCL
|
||||
#options ROOTDEVNAME=\"nfs:10.0.0.1:/mnt/bsd\"
|
||||
|
||||
# Options for making kernel less hangry
|
||||
@ -89,35 +90,46 @@ options NO_SWAPPING
|
||||
options ZERO_COPY_SOCKETS
|
||||
options MROUTING # Multicast routing
|
||||
options IPFIREWALL_DEFAULT_TO_ACCEPT
|
||||
options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI
|
||||
|
||||
device random
|
||||
device loop
|
||||
# RT3050F, RT3052F have only pseudo PHYs
|
||||
#device mii
|
||||
#device miibus
|
||||
device pty # Pseudo-ttys (telnet etc)
|
||||
device rt
|
||||
device ether
|
||||
# RT3050F, RT3052F have only attached switch, so no need to mii/miibus
|
||||
|
||||
device pty # Pseudo-ttys (telnet etc)
|
||||
device bpf # Berkeley packet filter
|
||||
device vlan
|
||||
#device lagg
|
||||
#device if_bridge
|
||||
device tun # Packet tunnel.
|
||||
device random
|
||||
device loop
|
||||
|
||||
# Chip have two UARTs - UART and UART Light
|
||||
device uart
|
||||
nodevice uart_ns8250
|
||||
device tun # Packet tunnel.
|
||||
|
||||
device wlan
|
||||
|
||||
# Wireless support
|
||||
# Work in progress
|
||||
#device ral
|
||||
#device wlan
|
||||
|
||||
# GPIO support
|
||||
device gpio
|
||||
device gpioled
|
||||
|
||||
# CFI flash support
|
||||
device cfi # Detect Flash memmory
|
||||
device cfid
|
||||
|
||||
# Read U-Boot environment from flash
|
||||
device nvram2env
|
||||
|
||||
device usb
|
||||
# USB support
|
||||
# Partial support. Not included yet.
|
||||
#device dotg # DWC like USB OTG Controller driver
|
||||
#options USB_DEBUG
|
||||
#device usb
|
||||
#device u3g
|
||||
#device umodem
|
||||
#device uplcom
|
||||
@ -125,10 +137,4 @@ device usb
|
||||
#device da
|
||||
#device pass
|
||||
#device scbus
|
||||
options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI
|
||||
|
||||
#options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
|
||||
#options USB_DEBUG
|
||||
#options USB_REQ_DEBUG
|
||||
|
||||
|
||||
|
||||
@ -4,87 +4,90 @@ hint.obio.0.at="nexus0"
|
||||
hint.obio.0.maddr=0x10000000
|
||||
hint.obio.0.msize=0x10000000
|
||||
|
||||
hint.nvram.0.sig=0xe5e60a74
|
||||
# on-board Ralink Frame Engine
|
||||
hint.rt.0.at="nexus0"
|
||||
hint.rt.0.maddr=0x10100000
|
||||
hint.rt.0.msize=0x10000
|
||||
hint.rt.0.irq=3
|
||||
|
||||
# UART Light
|
||||
hint.uart.1.flags="0x30"
|
||||
|
||||
# Lines below is Board specific
|
||||
# D-Link DIR-620
|
||||
hint.nvram.0.base=0x1f030000
|
||||
hint.nvram.0.maxsize=0x2000
|
||||
hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic
|
||||
hint.nvram.1.sig=0x5a045e94
|
||||
hint.nvram.0.flags=9 # 1 = No check, 2 = Format U-Boot
|
||||
hint.nvram.1.base=0x1f032000
|
||||
hint.nvram.1.maxsize=0x4000
|
||||
hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic
|
||||
|
||||
# on-board Ralink Frame Engine
|
||||
#hint.rt.0.at="nexus0"
|
||||
#hint.rt.0.maddr=0x12000000
|
||||
#hint.rt.0.msize=0x200000
|
||||
#hint.rt.0.irq=9
|
||||
hint.rt.0.macaddr="00:18:e7:d5:83:90"
|
||||
|
||||
# on-board Ralink 2872 802.11n core
|
||||
hint.rt2860.0.at="nexus0"
|
||||
hint.rt2860.0.maddr=0x10180000
|
||||
hint.rt2860.0.msize=0x40000
|
||||
hint.rt2860.0.irq=4
|
||||
|
||||
# uart0
|
||||
#hint.uart.0.at="obio0"
|
||||
#hint.uart.0.maddr=0x10000C00
|
||||
#hint.uart.0.msize=0x100
|
||||
#hint.uart.0.irq=12
|
||||
#hint.uart.0.flags="0x30"
|
||||
|
||||
# uart1
|
||||
#hint.uart.1.at="obio0"
|
||||
#hint.uart.1.maddr=0x10000500
|
||||
#hint.uart.1.msize=0x100
|
||||
#hint.uart.1.irq=5
|
||||
#hint.uart.1.flags="0x30"
|
||||
hint.nvram.1.flags=9 # 1 = No check, 2 = Format U-Boot
|
||||
|
||||
# Configure SYSCTL_GPIOMODE to pass FUART pins to GPIO
|
||||
# original:
|
||||
# hint.rt305x_sysctl.0.gpiomode=0x000283
|
||||
# required:
|
||||
hint.rt305x_sysctl.0.gpiomode=0x00029f
|
||||
|
||||
# gpio
|
||||
# GPIO0 - WPS BTN IN II IO
|
||||
|
||||
# Buttons
|
||||
# GPIO10 - Reset BTN IN PU II INT
|
||||
hint.gpioreset.0.at="gpiobus0"
|
||||
hint.gpioreset.0.pins="0x0400"
|
||||
hint.gpioreset.0.name="reset"
|
||||
hint.gpioreset.0.flags="0x04a1" # (INPUT|PULLUP|INVIN|REPORT)
|
||||
|
||||
## GPIO0 - WPS BTN IN PU II INT
|
||||
hint.gpiobutton.0.at="gpiobus0"
|
||||
hint.gpiobutton.0.pins="0x01"
|
||||
hint.gpiobutton.0.name="wps"
|
||||
hint.gpiobutton.0.flags="0x0581"
|
||||
hint.gpiobutton.0.flags="0x04a1" # (INPUT|PULLUP|INVIN|REPORT)
|
||||
|
||||
# GPIO7 - MODE SW AP IN II IO
|
||||
hint.gpiobutton.1.at="gpiobus0"
|
||||
hint.gpiobutton.1.pins="0x80"
|
||||
hint.gpiobutton.1.name="mode_ap"
|
||||
hint.gpiobutton.1.flags="0x0581"
|
||||
|
||||
# GPIO8 - ST LEDRED OUT /* 2pin BiDir RED/BLUE LED */
|
||||
# GPIO9 - ST LEDBLUE OUT
|
||||
# LEDs
|
||||
# Power Yellow 8
|
||||
# Power Green 9
|
||||
# WAN Green 12
|
||||
# WAN Yellow 14
|
||||
# WPS Orange 11
|
||||
# WPS Blue 13
|
||||
#GPIO8 STATUS ?
|
||||
hint.gpioled.0.at="gpiobus0"
|
||||
hint.gpioled.0.pins="0x100"
|
||||
hint.gpioled.0.name="status_red"
|
||||
hint.gpioled.0.flags="0x0002"
|
||||
hint.gpioled.0.pins="0x0100"
|
||||
hint.gpioled.0.name="status_yellow"
|
||||
hint.gpioled.0.flags="0x0102" # (OUTPUT|INVOUT)
|
||||
|
||||
#GPIO9 STATUS
|
||||
hint.gpioled.1.at="gpiobus0"
|
||||
hint.gpioled.1.pins="0x200"
|
||||
#hint.gpioled.1.name="status_blue"
|
||||
hint.gpioled.1.pins="0x0200"
|
||||
hint.gpioled.1.name="status"
|
||||
hint.gpioled.1.flags="0x0002"
|
||||
hint.gpioled.1.flags="0x0102" # (OUTPUT|INVOUT)
|
||||
|
||||
# GPIO10 - RST BTN IN II IO
|
||||
hint.gpiobutton.2.at="gpiobus0"
|
||||
hint.gpiobutton.2.pins="0x400"
|
||||
hint.gpiobutton.2.name="reset"
|
||||
hint.gpiobutton.2.flags="0x0581"
|
||||
|
||||
# GPIO11 - MODE SW CL IN II IO
|
||||
hint.gpiobutton.3.at="gpiobus0"
|
||||
hint.gpiobutton.3.pins="0x800"
|
||||
hint.gpiobutton.3.name="mode_wlan_client"
|
||||
hint.gpiobutton.3.flags="0x0581"
|
||||
|
||||
# GPIO14 - WPS LED OUT II IO
|
||||
#GPIO11 WPS Orange
|
||||
hint.gpioled.2.at="gpiobus0"
|
||||
hint.gpioled.2.pins="0x4000"
|
||||
hint.gpioled.2.name="wps"
|
||||
hint.gpioled.2.flags="0x0182"
|
||||
hint.gpioled.2.pins="0x0800"
|
||||
hint.gpioled.2.name="wps_orange"
|
||||
hint.gpioled.2.flags="0x0002" # (OUTPUT|INVOUT)
|
||||
|
||||
#GPIO12 WAN Green
|
||||
hint.gpioled.3.at="gpiobus0"
|
||||
hint.gpioled.3.pins="0x1000"
|
||||
hint.gpioled.3.name="wan"
|
||||
hint.gpioled.3.flags="0x0102" # (OUTPUT|INVOUT)
|
||||
|
||||
#GPIO13 WPS Blue
|
||||
hint.gpioled.4.at="gpiobus0"
|
||||
hint.gpioled.4.pins="0x2000"
|
||||
hint.gpioled.4.name="wps"
|
||||
hint.gpioled.4.flags="0x0002" # (OUTPUT|INVOUT)
|
||||
|
||||
#GPIO14 WAN Yellow
|
||||
hint.gpioled.5.at="gpiobus0"
|
||||
hint.gpioled.5.pins="0x4000"
|
||||
hint.gpioled.5.name="wan_yellow"
|
||||
hint.gpioled.5.flags="0x0102" # (OUTPUT|INVOUT)
|
||||
|
||||
hint.cfi.0.width=2
|
||||
hint.cfi.0.shift=2
|
||||
|
||||
#0x00000000-0x00030000 : "Bootloader"
|
||||
#0x00030000-0x00040000 : "Factory"
|
||||
@ -102,35 +105,30 @@ hint.map.0.readonly=1
|
||||
hint.map.1.at="cfid0"
|
||||
hint.map.1.start=0x00030000
|
||||
hint.map.1.end=0x00040000
|
||||
hint.map.1.name="factory"
|
||||
hint.map.1.name="linuxconfig"
|
||||
|
||||
hint.map.2.at="cfid0"
|
||||
hint.map.2.start=0x00040000
|
||||
hint.map.2.end=0x00800000
|
||||
hint.map.2.name="upgrade"
|
||||
hint.map.2.end=0x00050000
|
||||
hint.map.2.name="factory"
|
||||
|
||||
hint.map.3.at="cfid0"
|
||||
hint.map.3.start=0x00040000
|
||||
hint.map.3.end=0x00050000
|
||||
hint.map.3.name="config"
|
||||
hint.map.3.start=0x00050000
|
||||
hint.map.3.end=0x007e0000
|
||||
hint.map.3.name="upgrade"
|
||||
|
||||
hint.map.4.at="cfid0"
|
||||
hint.map.4.start=0x00000000
|
||||
hint.map.4.end=0x00000000
|
||||
hint.map.4.name="language"
|
||||
hint.map.4.name="kernel"
|
||||
hint.map.4.start=0x00050000
|
||||
hint.map.4.end="search:0x00100000:0x10000:.!/bin/sh"
|
||||
|
||||
hint.map.5.at="cfid0"
|
||||
hint.map.5.start=0x00050000
|
||||
hint.map.5.end=0x00150000
|
||||
hint.map.5.name="kernel"
|
||||
hint.map.5.name="rootfs"
|
||||
hint.map.5.start="search:0x00100000:0x10000:.!/bin/sh"
|
||||
hint.map.5.end=0x007e0000
|
||||
|
||||
hint.map.6.at="cfid0"
|
||||
hint.map.6.start=0x00150000
|
||||
hint.map.6.start=0x007e0000
|
||||
hint.map.6.end=0x00800000
|
||||
hint.map.6.name="rootfs"
|
||||
|
||||
|
||||
hint.rt.0.phymask=0x1f
|
||||
hint.rt.0.media=100
|
||||
hint.rt.0.fduplex=1
|
||||
hint.map.6.name="config"
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user