add %b formats for various registers

This commit is contained in:
sam 2009-06-21 19:17:22 +00:00
parent 7a1d3b618b
commit b69e15d521

View File

@ -46,6 +46,8 @@
#define IER_ERLS 0x4
#define IER_EMSC 0x8
#define IER_BITS "\20\1ERXRDY\2ETXRDY\3ERLS\4EMSC"
#define com_iir 2 /* interrupt identification register (R) */
#define REG_IIR com_iir
#define IIR_IMASK 0xf
@ -57,6 +59,8 @@
#define IIR_MLSC 0x0
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
#define IIR_BITS "\20\1NOPEND\2TXRDY\3RXRDY"
#define com_lcr 3 /* line control register (R/W) */
#define com_cfcr com_lcr /* character format control register (R/W) */
#define REG_LCR com_lcr
@ -97,6 +101,8 @@
#define MCR_RTS 0x02
#define MCR_DTR 0x01
#define MCR_BITS "\20\1DTR\2RTS\3DRS\4IE\5LOOPBACK\10PRESCALE"
#define com_lsr 5 /* line status register (R/W) */
#define REG_LSR com_lsr
#define LSR_RCV_FIFO 0x80
@ -111,6 +117,8 @@
#define LSR_RXRDY 0x01
#define LSR_RCV_MASK 0x1f
#define LSR_BITS "\20\1RXRDY\2OE\3PE\4FE\5BI\6THRE\7TEMT\10RCV_FIFO"
#define com_msr 6 /* modem status register (R/W) */
#define REG_MSR com_msr
#define MSR_DCD 0x80
@ -122,6 +130,8 @@
#define MSR_DDSR 0x02
#define MSR_DCTS 0x01
#define MSR_BITS "\20\1DCTS\2DDSR\3TERI\4DDCD\5CTS\6DSR\7RI\10DCD"
/* 8250 multiplexed registers #[0-1]. Access enabled by LCR[7]. */
#define com_dll 0 /* divisor latch low (R/W) */
#define com_dlbl com_dll
@ -154,6 +164,8 @@
#define FCR_RX_HIGH 0xc0
#define FIFO_RX_HIGH FCR_RX_HIGH
#define FCR_BITS "\20\1ENABLE\2RCV_RST\3XMT_RST\4DMA"
/* 16650 registers #2,[4-7]. Access enabled by LCR_EFR_ENABLE. */
#define com_efr 2 /* enhanced features register (R/W) */