d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

For TI12xx and newer, clear register 0x84. This is the "Multimedia"

Browse Source 
register.  It enables Zoom Video.  It appears that on at least one
card that Monzoon is using sets these bits by default.  Nothing works
when these bits are set, everything works when they are clear.

Add commentary on some of the ti bits.  Make code a little clearer.
Also remove a call to pcic_pci_pd6729 which was prematurely added in
the last commit.
This commit is contained in:
imp 2001-08-14 07:31:47 +00:00
parent 14112e9d98
commit bfd8c5ea31
2 changed files with 37 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
sys/pccard/pcic_pci.c
View File

@ -278,21 +278,14 @@ pcic_pci_ti_init(device_t dev)
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
switch (ti113x) {
case 0 :
device_printf(dev, "TI12XX PCI Config Reg: ");
diagctl = pci_read_config(dev, TI12XX_PCI_DIAGNOSTIC, 1);
diagctl |= TI12XX_DIAG_CSC_INTR;
pci_write_config(dev, TI12XX_PCI_DIAGNOSTIC, diagctl, 1);
break;
case 1 :
if (ti113x) {
device_printf(dev, "TI113X PCI Config Reg: ");
/*
* Default card control register setting is
* PCI interrupt. The method of this code
* switches PCI INT and ISA IRQ by bit 7 of
* Bridge Control Register(Offset:0x3e,0x13e).
* Takeshi Shibagaki(shiba@jp.freebsd.org)
/*
* The TI-1130 (and 1030 and 1131) have a different
* interrupt routing control than the newer cards. The
* newer cards also use offset 0x3e (the Bridge Control
* register).
*/
if (sc->func_route >= pci_parallel) {
cardcntl |= TI113X_CARDCNTL_PCI_IRQ_ENA;
@ -312,8 +305,34 @@ pcic_pci_ti_init(device_t dev)
else
printf("[clkrun irq 10]");
}
break;
} else {
device_printf(dev, "TI12XX PCI Config Reg: ");
/*
* Turn on async CSC interrupts. This appears to
* be the default, but the old, pre pci-aware, code
* did this and it appears PAO does as well.
*/
diagctl = pci_read_config(dev, TI12XX_PCI_DIAGNOSTIC, 1);
diagctl |= TI12XX_DIAG_CSC_INTR;
pci_write_config(dev, TI12XX_PCI_DIAGNOSTIC, diagctl, 1);
/*
* Turn off Zoom Video. Some cards have this enabled,
* some do not but it causes problems when enabled. This
* register doesn't exist on the 1130 (and likely the 1131,
* but without a datasheet it is impossible to know).
* Some 12xx chips may not have it, but setting it is
* believed to be harmless.
*/
pci_write_config(dev, TI12XX_PCI_MULTIMEDIA_CONTROL, 0, 4);
}
/*
* Default card control register setting is PCI interrupt.
* The method of this code switches PCI INT and ISA IRQ by bit
* 7 of Bridge Control Register(Offset:0x3e,0x13e).
* Takeshi Shibagaki(shiba@jp.freebsd.org)
*/
if (sc->func_route >= pci_parallel) {
devcntl &= ~TI113X_DEVCNTL_INTR_MASK;
pci_write_config(dev, TI113X_PCI_DEVICE_CONTROL, devcntl, 1);
@ -655,8 +674,10 @@ pcic_pci_attach(device_t dev)
pcic_pci_pd683x_init(dev);
pcic_pci_cardbus_init(dev);
break;
#ifdef notyet
case PCI_DEVICE_ID_PCIC_CLPD6729:
pcic_pci_pd6729_init(dev);
#endif
default:
pcic_pci_cardbus_init(dev);
break;

1
sys/pccard/pcic_pci.h
View File

@ -42,6 +42,7 @@
/* End of CL-PD6832 defines */
/* Texas Instruments PCI-1130/1131 CardBus Controller */
#define TI113X_PCI_SYSTEM_CONTROL 0x80 /* System Control */
#define TI12XX_PCI_MULTIMEDIA_CONTROL 0x84 /* Zoom Video */
#define TI113X_PCI_RETRY_STATUS 0x90 /* Retry Status */
#define TI113X_PCI_CARD_CONTROL 0x91 /* Card Control */
#define TI113X_PCI_DEVICE_CONTROL 0x92 /* Device Control */