mpsutil slot set status

This code has been written as a proof of concept, but I think that it
can be useful in general.  It allows to set the status of an enclosure
slot.  Practically, this means controlling whatever slot status LEDs the
enclosure provides.  At present, the new command does not have sanity
checks or any conveniences.  That means that it is possible to issue the
command for an invalid slot and an enclosure.  But the worst I have seen
happening is either the command failing or simply being ignored.  Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_.  The only way to address a
slot is by the enclosure handle and the slot number.  Both are readily
available from mpsutil show commands.

So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.

The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob.  Second, it supports setting only
locate / identify status bit.

Tested on HP H220 running LSI IT firmware 20.x.

Reviewed by:	bapt
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D20535
This commit is contained in:
Andriy Gapon 2019-09-04 13:47:38 +00:00
parent 08509077b3
commit c2a13d6f24
4 changed files with 139 additions and 1 deletions

View File

@ -1,7 +1,7 @@
# $FreeBSD$
PROG= mpsutil
SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_show.c mpsutil.c
SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_show.c mps_slot.c mpsutil.c
MAN= mpsutil.8
WARNS?= 3

View File

@ -282,6 +282,29 @@ mps_map_btdh(int fd, uint16_t *devhandle, uint16_t *bus, uint16_t *target)
return (0);
}
int
mps_set_slot_status(int fd, U16 handle, U16 slot, U32 status)
{
MPI2_SEP_REQUEST req;
MPI2_SEP_REPLY reply;
bzero(&req, sizeof(req));
req.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
req.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
req.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
req.EnclosureHandle = handle;
req.Slot = slot;
req.SlotStatus = status;
if (mps_pass_command(fd, &req, sizeof(req), &reply, sizeof(reply),
NULL, 0, NULL, 0, 30) != 0)
return (errno);
if (!IOC_STATUS_SUCCESS(reply.IOCStatus))
return (EIO);
return (0);
}
int
mps_read_config_page_header(int fd, U8 PageType, U8 PageNumber, U32 PageAddress,
MPI2_CONFIG_PAGE_HEADER *header, U16 *IOCStatus)

114
usr.sbin/mpsutil/mps_slot.c Normal file
View File

@ -0,0 +1,114 @@
/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2019 Andriy Gapon <avg@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__RCSID("$FreeBSD$");
#include <sys/stat.h>
#include <sys/param.h>
#include <sys/mman.h>
#include <errno.h>
#include <err.h>
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "mpsutil.h"
MPS_TABLE(top, slot);
static int
slot_set(int argc, char **argv)
{
char *endptr;
unsigned long ux;
long x;
int error;
int fd;
U32 status;
U16 handle;
U16 slot;
if (argc != 5) {
warnx("Incorrect number of arguments");
return (EINVAL);
}
if (strcmp(argv[1], "status") != 0) {
warnx("Invalid argument '%s', expecting 'status'",
argv[1]);
return (EINVAL);
}
errno = 0;
x = strtol(argv[2], &endptr, 0);
if (*endptr != '\0' || errno != 0 || x < 0 || x > UINT16_MAX) {
warnx("Invalid enclosure handle argument '%s'", argv[2]);
return (EINVAL);
}
handle = x;
errno = 0;
x = strtol(argv[3], &endptr, 0);
if (*endptr != '\0' || errno != 0 || x < 0 || x > UINT16_MAX) {
warnx("Invalid slot argument '%s'", argv[3]);
return (EINVAL);
}
slot = x;
errno = 0;
ux = strtoul(argv[4], &endptr, 0);
if (*endptr != '\0' || errno != 0 || ux > UINT32_MAX) {
warnx("Invalid status argument '%s'", argv[4]);
return (EINVAL);
}
status = ux;
fd = mps_open(mps_unit);
if (fd < 0) {
error = errno;
warn("mps_open");
return (error);
}
if (mps_set_slot_status(fd, handle, slot, status) != 0) {
warnx("Failed to set status");
close(fd);
return (1);
}
close(fd);
printf("Successfully set slot status\n");
return (0);
}
MPS_COMMAND(slot, set, slot_set, "status <enclosure handle> <slot number> "
"<status>", "Set status of the slot in the directly attached enclosure");

View File

@ -128,6 +128,7 @@ int mps_map_btdh(int fd, uint16_t *devhandle, uint16_t *bus,
const char *mps_ioc_status(U16 IOCStatus);
int mps_firmware_send(int fd, unsigned char *buf, uint32_t len, bool bios);
int mps_firmware_get(int fd, unsigned char **buf, bool bios);
int mps_set_slot_status(int fd, U16 handle, U16 slot, U32 status);
static __inline void *
mps_read_man_page(int fd, U8 PageNumber, U16 *IOCStatus)