MIPS changes for Netlogic XLP support.

This patch adds support for the Netlogic XLP mips64 processors in the common MIPS code. The changes are : - Add CPU_NLM processor type - Add cases for CPU_NLM, mostly were CPU_RMI is used. - Update cache flush changes for CPU_NLM - Add kernel build configuration files for xLP. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 20:31:29 +00:00 · 2011-07-16 20:31:29 +00:00 · c7527da836
commit c7527da836
parent 87a4ad12f0
16 changed files with 351 additions and 26 deletions
--- a/sys/conf/options.mips
+++ b/sys/conf/options.mips
@ -36,6 +36,7 @@ CPU_HAVEFPU	opt_global.h
 CPU_SB1 	opt_global.h
 CPU_CNMIPS	opt_global.h
 CPU_RMI		opt_global.h
+CPU_NLM		opt_global.h

 ISA_MIPS1	opt_cputype.h
 ISA_MIPS3	opt_cputype.h
--- a/sys/mips/conf/XLP
+++ b/sys/mips/conf/XLP
@ -0,0 +1,93 @@
+# XLP -- Generic kernel configuration file for FreeBSD/mips
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files. 
+# If you are in doubt as to the purpose or necessity of a line, check first 
+# in NOTES.
+#
+# $FreeBSD$
+
+machine 	mips mipseb
+ident           XLP
+
+options		ISA_MIPS32
+makeoptions	KERNLOADADDR=0x80100000
+
+include		"../nlm/std.xlp"
+makeoptions	MODULES_OVERRIDE=""
+makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
+#profile 	2
+makeoptions	TRAMPLOADADDR=0xffffffff85000000
+makeoptions	TRAMP_ARCH_FLAGS="-mabi=64 -march=mips64"
+
+options 	SCHED_ULE		# ULE scheduler
+#options 	VERBOSE_SYSINIT
+#options 	SCHED_4BSD		# 4BSD scheduler
+options         SMP
+options 	PREEMPTION		# Enable kernel thread preemption
+#options 	FULL_PREEMPTION		# Enable kernel thread preemption
+options 	INET			# InterNETworking
+options 	INET6			# IPv6 communications protocols
+options 	FFS			# Berkeley Fast Filesystem
+#options 	SOFTUPDATES		# Enable FFS soft updates support
+options 	UFS_ACL			# Support for access control lists
+options 	UFS_DIRHASH		# Improve performance on big directories
+options		NFSCL
+options		NFS_ROOT
+options		MSDOSFS			#MSDOS Filesystem
+#
+#options 	BOOTP
+#options 	BOOTP_NFSROOT
+#options 	BOOTP_NFSV3
+#options 	BOOTP_WIRED_TO=nlge0
+#options 	BOOTP_COMPAT
+#options 	ROOTDEVNAME=\"nfs:10.1.1.8:/usr/extra/nfsroot\"
+#
+options 	MD_ROOT			# MD is a potential root device
+options		MD_ROOT_SIZE=27000
+options		ROOTDEVNAME=\"ufs:md0\"
+options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options 	HZ=1000	
+options 	NO_SWAPPING
+
+#Debugging options
+options 	KTRACE			# ktrace(1) support
+options 	DDB
+options 	KDB
+options 	GDB
+options 	BREAK_TO_DEBUGGER
+options 	ALT_BREAK_TO_DEBUGGER
+#options 	DEADLKRES		#Enable the deadlock resolver
+#options 	INVARIANTS		#Enable calls of extra sanity checking
+#options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
+#options 	WITNESS			#Enable checks to detect deadlocks and cycles
+#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
+#options 	KTR			# ktr(4) and ktrdump(8) support
+#options 	KTR_COMPILE=(KTR_LOCK|KTR_PROC|KTR_INTR|KTR_CALLOUT|KTR_UMA|KTR_SYSC)
+#options 	KTR_ENTRIES=131072
+#options 	LOCK_DEBUG
+#options 	LOCK_PROFILING
+
+
+# Pseudo
+device		loop
+device		random
+device		md
+device		pty
+device		bpf
+
+# UART
+device		uart
+
+# Network
+device		ether
--- a/sys/mips/conf/XLP64
+++ b/sys/mips/conf/XLP64
@ -0,0 +1,95 @@
+# XLP64 -- Generic kernel configuration file for FreeBSD/mips
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files. 
+# If you are in doubt as to the purpose or necessity of a line, check first 
+# in NOTES.
+#
+# $FreeBSD$
+
+machine 	mips mips64eb
+ident           XLP64
+
+options 	ISA_MIPS64
+makeoptions	ARCH_FLAGS="-march=mips64 -mabi=64"
+makeoptions	KERNLOADADDR=0xffffffff80100000
+
+include		"../nlm/std.xlp"
+
+makeoptions	MODULES_OVERRIDE=""
+makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
+#profile 	2
+makeoptions	TRAMPLOADADDR=0xffffffff85000000
+makeoptions	TRAMP_ARCH_FLAGS="-mabi=64 -march=mips64"
+
+options 	SCHED_ULE		# ULE scheduler
+#options 	VERBOSE_SYSINIT
+#options 	SCHED_4BSD		# 4BSD scheduler
+options         SMP
+options 	PREEMPTION		# Enable kernel thread preemption
+#options 	FULL_PREEMPTION		# Enable kernel thread preemption
+options 	INET			# InterNETworking
+options 	INET6			# IPv6 communications protocols
+options 	FFS			# Berkeley Fast Filesystem
+#options 	SOFTUPDATES		# Enable FFS soft updates support
+options 	UFS_ACL			# Support for access control lists
+options 	UFS_DIRHASH		# Improve performance on big directories
+options		NFSCL
+options		NFS_ROOT
+options		MSDOSFS			#MSDOS Filesystem
+#
+#options 	BOOTP
+#options 	BOOTP_NFSROOT
+#options 	BOOTP_NFSV3
+#options 	BOOTP_WIRED_TO=nlge0
+#options 	BOOTP_COMPAT
+#options 	ROOTDEVNAME=\"nfs:10.1.1.8:/usr/extra/nfsroot\"
+#
+options 	MD_ROOT			# MD is a potential root device
+options		MD_ROOT_SIZE=27000
+options		ROOTDEVNAME=\"ufs:md0\"
+options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options 	HZ=1000	
+options 	NO_SWAPPING
+
+#Debugging options
+options 	KTRACE			# ktrace(1) support
+options 	DDB
+options 	KDB
+options 	GDB
+options 	BREAK_TO_DEBUGGER
+options 	ALT_BREAK_TO_DEBUGGER
+#options 	DEADLKRES		#Enable the deadlock resolver
+#options 	INVARIANTS		#Enable calls of extra sanity checking
+#options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
+#options 	WITNESS			#Enable checks to detect deadlocks and cycles
+#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
+#options 	KTR			# ktr(4) and ktrdump(8) support
+#options 	KTR_COMPILE=(KTR_LOCK|KTR_PROC|KTR_INTR|KTR_CALLOUT|KTR_UMA|KTR_SYSC)
+#options 	KTR_ENTRIES=131072
+#options 	LOCK_DEBUG
+#options 	LOCK_PROFILING
+
+
+# Pseudo
+device		loop
+device		random
+device		md
+device		pty
+device		bpf
+
+# UART
+device		uart
+
+# Network
+device		ether
--- a/sys/mips/conf/XLPN32
+++ b/sys/mips/conf/XLPN32
@ -0,0 +1,94 @@
+# XLPN32 -- Generic kernel configuration file for FreeBSD/mips
+#
+# For more information on this file, please read the handbook section on
+# Kernel Configuration Files:
+#
+#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
+#
+# The handbook is also available locally in /usr/share/doc/handbook
+# if you've installed the doc distribution, otherwise always see the
+# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
+# latest information.
+#
+# An exhaustive list of options and more detailed explanations of the
+# device lines is also present in the ../../conf/NOTES and NOTES files. 
+# If you are in doubt as to the purpose or necessity of a line, check first 
+# in NOTES.
+#
+# $FreeBSD$
+
+machine 	mips mipsn32eb
+ident           XLPN32
+
+options 	ISA_MIPS64
+makeoptions	ARCH_FLAGS="-march=mips64 -mabi=n32"
+makeoptions	KERNLOADADDR=0x80100000
+
+include		"../nlm/std.xlp"
+makeoptions	MODULES_OVERRIDE=""
+makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
+#profile 	2
+makeoptions	TRAMPLOADADDR=0xffffffff85000000
+makeoptions	TRAMP_ARCH_FLAGS="-mabi=64 -march=mips64"
+
+options 	SCHED_ULE		# ULE scheduler
+#options 	VERBOSE_SYSINIT
+#options 	SCHED_4BSD		# 4BSD scheduler
+options         SMP
+options 	PREEMPTION		# Enable kernel thread preemption
+#options 	FULL_PREEMPTION		# Enable kernel thread preemption
+options 	INET			# InterNETworking
+options 	INET6			# IPv6 communications protocols
+options 	FFS			# Berkeley Fast Filesystem
+#options 	SOFTUPDATES		# Enable FFS soft updates support
+options 	UFS_ACL			# Support for access control lists
+options 	UFS_DIRHASH		# Improve performance on big directories
+options		NFSCL
+options		NFS_ROOT
+options		MSDOSFS			#MSDOS Filesystem
+#
+#options 	BOOTP
+#options 	BOOTP_NFSROOT
+#options 	BOOTP_NFSV3
+#options 	BOOTP_WIRED_TO=nlge0
+#options 	BOOTP_COMPAT
+#options 	ROOTDEVNAME=\"nfs:10.1.1.8:/usr/extra/nfsroot\"
+#
+options 	MD_ROOT			# MD is a potential root device
+options		MD_ROOT_SIZE=27000
+options		ROOTDEVNAME=\"ufs:md0\"
+options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options 	HZ=1000	
+options 	NO_SWAPPING
+
+#Debugging options
+options 	KTRACE			# ktrace(1) support
+options 	DDB
+options 	KDB
+options 	GDB
+options 	BREAK_TO_DEBUGGER
+options 	ALT_BREAK_TO_DEBUGGER
+#options 	DEADLKRES		#Enable the deadlock resolver
+#options 	INVARIANTS		#Enable calls of extra sanity checking
+#options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
+#options 	WITNESS			#Enable checks to detect deadlocks and cycles
+#options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
+#options 	KTR			# ktr(4) and ktrdump(8) support
+#options 	KTR_COMPILE=(KTR_LOCK|KTR_PROC|KTR_INTR|KTR_CALLOUT|KTR_UMA|KTR_SYSC)
+#options 	KTR_ENTRIES=131072
+#options 	LOCK_DEBUG
+#options 	LOCK_PROFILING
+
+
+# Pseudo
+device		loop
+device		random
+device		md
+device		pty
+device		bpf
+
+# UART
+device		uart
+
+# Network
+device		ether
--- a/sys/mips/include/bus.h
+++ b/sys/mips/include/bus.h
@ -721,7 +721,7 @@ void	__bs_c(f,_bs_c_8) (void *t, bus_space_handle_t bsh1,	\
 DECLARE_BUS_SPACE_PROTOTYPES(generic);
 extern bus_space_tag_t mips_bus_space_generic;
 /* Special bus space for RMI processors */
-#ifdef CPU_RMI
+#if defined(CPU_RMI) || defined (CPU_NLM)
 extern bus_space_tag_t rmi_bus_space;
 extern bus_space_tag_t rmi_pci_bus_space;
 #endif
--- a/sys/mips/include/cpufunc.h
+++ b/sys/mips/include/cpufunc.h
@ -254,6 +254,10 @@ MIPS_RW32_COP0_SEL(config3, MIPS_COP_0_CONFIG, 3);
 #ifdef CPU_CNMIPS
 MIPS_RW32_COP0_SEL(config4, MIPS_COP_0_CONFIG, 4);
 #endif
+#ifdef CPU_NLM
+MIPS_RW32_COP0_SEL(config6, MIPS_COP_0_CONFIG, 6);
+MIPS_RW32_COP0_SEL(config7, MIPS_COP_0_CONFIG, 7);
+#endif
 MIPS_RW32_COP0(count, MIPS_COP_0_COUNT);
 MIPS_RW32_COP0(index, MIPS_COP_0_TLB_INDEX);
 MIPS_RW32_COP0(wired, MIPS_COP_0_TLB_WIRED);
--- a/sys/mips/include/intr_machdep.h
+++ b/sys/mips/include/intr_machdep.h
@ -29,7 +29,7 @@
 #ifndef	_MACHINE_INTR_MACHDEP_H_
 #define	_MACHINE_INTR_MACHDEP_H_

-#ifdef CPU_RMI
+#if defined(CPU_RMI) || defined(CPU_NLM)
 #define XLR_MAX_INTR 64 
 #else
 #define NHARD_IRQS	6
--- a/sys/mips/mips/cache.c
+++ b/sys/mips/mips/cache.c
@ -80,6 +80,11 @@ __FBSDID("$FreeBSD$");

 struct mips_cache_ops mips_cache_ops;

+static void
+cache_noop(vm_offset_t va, vm_size_t size)
+{
+}
+
 void
 mips_config_cache(struct mips_cpuinfo * cpuinfo)
 {
@ -94,8 +99,13 @@ mips_config_cache(struct mips_cpuinfo * cpuinfo)
 		break;
 	case 32:
 		mips_cache_ops.mco_icache_sync_all = mipsNN_icache_sync_all_32;
+#ifdef CPU_NLM
+		mips_cache_ops.mco_icache_sync_range =
+		    mipsNN_icache_sync_range_index_32;
+#else
 		mips_cache_ops.mco_icache_sync_range =
 		    mipsNN_icache_sync_range_32;
+#endif
 		mips_cache_ops.mco_icache_sync_range_index =
 		    mipsNN_icache_sync_range_index_32;
 		break;
@ -143,16 +153,26 @@ mips_config_cache(struct mips_cpuinfo * cpuinfo)
 		mips_cache_ops.mco_pdcache_wbinv_all =
 		    mips_cache_ops.mco_intern_pdcache_wbinv_all =
 		    mipsNN_pdcache_wbinv_all_32;
+#ifdef CPU_NLM
+		mips_cache_ops.mco_pdcache_wbinv_range =
+		    mipsNN_pdcache_wbinv_range_index_32;
+#else
 		mips_cache_ops.mco_pdcache_wbinv_range =
 		    mipsNN_pdcache_wbinv_range_32;
+#endif
 		mips_cache_ops.mco_pdcache_wbinv_range_index =
 		    mips_cache_ops.mco_intern_pdcache_wbinv_range_index =
 		    mipsNN_pdcache_wbinv_range_index_32;
 		mips_cache_ops.mco_pdcache_inv_range =
 		    mipsNN_pdcache_inv_range_32;
+#if defined(CPU_RMI) || defined(CPU_NLM)
+		mips_cache_ops.mco_pdcache_wb_range =
+		    mips_cache_ops.mco_intern_pdcache_wb_range = cache_noop;
+#else
 		mips_cache_ops.mco_pdcache_wb_range =
 		    mips_cache_ops.mco_intern_pdcache_wb_range =
 		    mipsNN_pdcache_wb_range_32;
+#endif
 		break;
 #ifdef CPU_CNMIPS
 	case 128:
--- a/sys/mips/mips/cache_mipsNN.c
+++ b/sys/mips/mips/cache_mipsNN.c
@ -54,15 +54,36 @@ __FBSDID("$FreeBSD$");
 #define	round_line32(x)		(((x) + 31) & ~31)
 #define	trunc_line32(x)		((x) & ~31)

+#if defined(CPU_NLM)
+static __inline void
+xlp_sync(void)
+{
+        __asm __volatile (
+	    ".set push              \n"
+	    ".set noreorder         \n"
+	    ".set mips64            \n"
+	    "dla    $8, 1f          \n"
+	    "/* jr.hb $8 */         \n"
+	    ".word 0x1000408        \n"
+	    "nop                    \n"
+	 "1: nop                    \n"
+	    ".set pop               \n"
+	    : : : "$8");
+}
+#endif

-#ifdef SB1250_PASS1
+#if defined(SB1250_PASS1)
 #define	SYNC	__asm volatile("sync; sync")
+#elif defined(CPU_NLM)
+#define SYNC	xlp_sync()
 #else
 #define	SYNC	__asm volatile("sync")
 #endif

-#ifdef CPU_CNMIPS
+#if defined(CPU_CNMIPS)
 #define SYNCI  mips_sync_icache();
+#elif defined(CPU_NLM)
+#define SYNCI	xlp_sync()
 #else
 #define SYNCI
 #endif
--- a/sys/mips/mips/cpu.c
+++ b/sys/mips/mips/cpu.c
@ -101,8 +101,14 @@ mips_get_identity(struct mips_cpuinfo *cpuinfo)

 	/* Learn TLB size and L1 cache geometry. */
 	cfg1 = mips_rd_config1();
+#ifndef CPU_NLM
 	cpuinfo->tlb_nentries = 
 	    ((cfg1 & MIPS_CONFIG1_TLBSZ_MASK) >> MIPS_CONFIG1_TLBSZ_SHIFT) + 1;
+#else
+	/* Account for Extended TLB entries in XLP */
+	tmp = mips_rd_config6();
+	cpuinfo->tlb_nentries = ((tmp >> 16) & 0xffff) + 1;
+#endif

 	/* Add extended TLB size information from config4.  */
 #if defined(CPU_CNMIPS)
--- a/sys/mips/mips/exception.S
+++ b/sys/mips/mips/exception.S
@ -228,7 +228,7 @@ SlowFault:
 	and     a0, a0, a2              ; \
        mtc0    a0, MIPS_COP_0_STATUS   ; \
 	ITLBNOPFIX
-#elif defined(CPU_RMI)
+#elif defined(CPU_RMI) || defined(CPU_NLM)
 #define CLEAR_STATUS \
 	mfc0    a0, MIPS_COP_0_STATUS   ;\
 	li      a2, (MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_COP_2_BIT) ; \
@ -470,7 +470,7 @@ NNON_LEAF(MipsUserGenException, CALLFRAME_SIZ, ra)
 	and	t0, a0, ~(MIPS_SR_COP_1_BIT | MIPS_SR_EXL | MIPS3_SR_KSU_MASK | MIPS_SR_INT_IE)
 #if defined(CPU_CNMIPS)
 	or      t0, t0, (MIPS_SR_KX | MIPS_SR_SX | MIPS_SR_UX | MIPS_SR_PX)
-#elif defined(CPU_RMI)	
+#elif defined(CPU_RMI)	|| defined(CPU_NLM)
 	or      t0, t0, (MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_COP_2_BIT)
 #endif	
 	mtc0	t0, MIPS_COP_0_STATUS
@ -688,7 +688,7 @@ NNON_LEAF(MipsUserIntr, CALLFRAME_SIZ, ra)
 	and	t0, a0, ~(MIPS_SR_COP_1_BIT | MIPS_SR_EXL | MIPS_SR_INT_IE | MIPS3_SR_KSU_MASK)
 #ifdef CPU_CNMIPS
 	or      t0, t0, (MIPS_SR_KX | MIPS_SR_SX | MIPS_SR_UX | MIPS_SR_PX)
-#elif defined(CPU_RMI)	
+#elif defined(CPU_RMI)	|| defined(CPU_NLM)
 	or      t0, t0, (MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_COP_2_BIT)
 #endif	
 	mtc0	t0, MIPS_COP_0_STATUS
--- a/sys/mips/mips/locore.S
+++ b/sys/mips/mips/locore.S
@ -99,7 +99,7 @@ VECTOR(_locore, unknown)

 	/* Reset these bits */
        li	t0, ~(MIPS_SR_DE | MIPS_SR_SOFT_RESET | MIPS_SR_ERL | MIPS_SR_EXL | MIPS_SR_INT_IE)
-#elif defined (CPU_RMI)
+#elif defined (CPU_RMI) || defined (CPU_NLM) 
 	/* Set these bits */
        li	t1, (MIPS_SR_COP_2_BIT | MIPS_SR_COP_0_BIT | MIPS_SR_KX | MIPS_SR_UX)

--- a/sys/mips/mips/machdep.c
+++ b/sys/mips/mips/machdep.c
@ -338,7 +338,7 @@ mips_vector_init(void)
 	bcopy(MipsTLBMiss, (void *)MIPS_UTLB_MISS_EXC_VEC,
 	      MipsTLBMissEnd - MipsTLBMiss);

-#if defined(CPU_CNMIPS) || defined(CPU_RMI)
+#if defined(CPU_CNMIPS) || defined(CPU_RMI) || defined(CPU_NLM)
 /* Fake, but sufficient, for the 32-bit with 64-bit hardware addresses  */
 	bcopy(MipsTLBMiss, (void *)MIPS3_XTLB_MISS_EXC_VEC,
 	      MipsTLBMissEnd - MipsTLBMiss);
--- a/sys/mips/nlm/cms.c
+++ b/sys/mips/nlm/cms.c
@ -257,13 +257,14 @@ xlp_handle_msg_vc(int vc, int max_msgs)
 			continue;
 		}
 		he = &msgmap[srcid];
-		if(he->action == NULL) {
+		if(he->action != NULL)
+			(he->action)(vc, size, code, srcid, &msg, he->arg);
+#if 0 /* debug */
+		else
 			printf("[%s]: No Handler for message from stn_id=%d,"
 			    " vc=%d, size=%d, msg0=%jx, dropping message\n",
 			    __func__, srcid, vc, size, (uintmax_t)msg.msg[0]);
-			continue;
-		}
-		(he->action)(vc, size, code, srcid, &msg, he->arg);
+#endif
 	}

 	return (i);
--- a/sys/mips/nlm/std.xlp
+++ b/sys/mips/nlm/std.xlp
@ -1,12 +1,4 @@
 # $FreeBSD$
 files	"../nlm/files.xlp"
-cpu	CPU_NLMXLP
+cpu	CPU_NLM

-#
-# XXXMIPS: It's a stub, isn't it?
-#
-#option	HW_PAGEWALKER
-#option	MMU_HASH_MODE  # enables hash based lookup into extended TLBs
-#option	MMU_CLOCK_GATING # enables clock gating on MMU
-#option	MMU_GLOBAL_MODE  # enables global mode of sharing all TLBs with all h/w threads
-#option	NOFPU
--- a/sys/mips/nlm/xlp_machdep.c
+++ b/sys/mips/nlm/xlp_machdep.c
@ -214,8 +214,7 @@ xlp_parse_mmu_options(void)

 unsupp:
 	printf("ERROR : Unsupported CPU mask [use 1,2 or 4 threads per core].\n"
-	    "\tcore0 thread mask [%lx], boot cpu mask [%lx]\n"
-	    "\tUsing default, 16 TLB entries per CPU, split mode\n", 
+	    "\tcore0 thread mask [%lx], boot cpu mask [%lx].\n",
 	    (u_long)core0_thr_mask, (u_long)cpu_map);
 	panic("Invalid CPU mask - halting.\n");
 	return;
@ -495,8 +494,6 @@ platform_start(__register_t a0 __unused,
 	xlp_pic_init();

 	mips_timer_init_params(xlp_cpu_frequency, 0);
-
-	printf("Platform specific startup now completes\n");
 }

 void 
@ -630,6 +627,7 @@ platform_ipi_intrnum(void)
 void
 platform_ipi_send(int cpuid)
 {
+
 	nlm_pic_send_ipi(xlp_pic_base, 0, xlp_cpuid_to_hwtid[cpuid],
 	    platform_ipi_intrnum(), 0);
 }