d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

MFV r342175:

Browse Source 
Update sqlite3-3.23.1 --> sqlite3-3.26.0 (3260000)

MFC after:	3 days
Security:	https://blade.tencent.com/magellan/index_en.html
		No known CVE was apparently registered.
This commit is contained in:
cy 2018-12-18 01:12:30 +00:00
commit ce7ba01778
24 changed files with 42010 additions and 9378 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
contrib/sqlite3/Makefile.am
View File

@ -1,6 +1,5 @@
AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @ZLIB_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
AM_CFLAGS = @BUILD_CFLAGS@
lib_LTLIBRARIES = libsqlite3.la
libsqlite3_la_SOURCES = sqlite3.c
libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
@ -14,7 +13,7 @@ sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_D
include_HEADERS = sqlite3.h sqlite3ext.h
EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs
EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs Makefile.fallback
pkgconfigdir = ${libdir}/pkgconfig
pkgconfig_DATA = sqlite3.pc

19
contrib/sqlite3/Makefile.fallback Normal file
View File

@ -0,0 +1,19 @@
#!/usr/bin/make
#
# If the configure script does not work, then this Makefile is available
# as a backup. Manually configure the variables below.
#
# Note: This makefile works out-of-the-box on MacOS 10.2 (Jaguar)
#
CC = gcc
CFLAGS = -O0 -I.
LIBS = -lz
COPTS += -D_BSD_SOURCE
COPTS += -DSQLITE_ENABLE_LOCKING_STYLE=0
COPTS += -DSQLITE_THREADSAFE=0
COPTS += -DSQLITE_OMIT_LOAD_EXTENSION
COPTS += -DSQLITE_WITHOUT_ZONEMALLOC
COPTS += -DSQLITE_ENABLE_RTREE
sqlite3: shell.c sqlite3.c
$(CC) $(CFLAGS) $(COPTS) -o sqlite3 shell.c sqlite3.c $(LIBS)

10
contrib/sqlite3/Makefile.in
View File

@ -260,7 +260,6 @@ DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
DYNAMIC_EXTENSION_FLAGS = @DYNAMIC_EXTENSION_FLAGS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
@ -268,14 +267,12 @@ EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXTRA_SHELL_OBJ = @EXTRA_SHELL_OBJ@
FGREP = @FGREP@
FTS5_FLAGS = @FTS5_FLAGS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JSON1_FLAGS = @JSON1_FLAGS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
@ -305,14 +302,11 @@ PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
SED = @SED@
SESSION_FLAGS = @SESSION_FLAGS@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SHELL_CFLAGS = @SHELL_CFLAGS@
STRIP = @STRIP@
THREADSAFE_FLAGS = @THREADSAFE_FLAGS@
VERSION = @VERSION@
ZLIB_FLAGS = @ZLIB_FLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
@ -365,7 +359,7 @@ target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @ZLIB_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
AM_CFLAGS = @BUILD_CFLAGS@
lib_LTLIBRARIES = libsqlite3.la
libsqlite3_la_SOURCES = sqlite3.c
libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
@ -375,7 +369,7 @@ sqlite3_LDADD = @EXTRA_SHELL_OBJ@ @READLINE_LIBS@
sqlite3_DEPENDENCIES = @EXTRA_SHELL_OBJ@
sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_ENABLE_STMTVTAB -DSQLITE_ENABLE_DBSTAT_VTAB $(SHELL_CFLAGS)
include_HEADERS = sqlite3.h sqlite3ext.h
EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs
EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs Makefile.fallback
pkgconfigdir = ${libdir}/pkgconfig
pkgconfig_DATA = sqlite3.pc
man_MANS = sqlite3.1

15
contrib/sqlite3/Makefile.msc
View File

@ -277,6 +277,12 @@ SQLITE3EXEPDB = /pdb:sqlite3sh.pdb
!IF $(MINIMAL_AMALGAMATION)==0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_JSON1=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_INTROSPECTION_PRAGMAS=1
!ENDIF
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1
!ENDIF
@ -928,10 +934,9 @@ LIBRESOBJS =
# when the shell is not being dynamically linked.
#
!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_JSON1 -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_STMTVTAB
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_ENABLE_DBSTAT_VTAB
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC -DSQLITE_INTROSPECTION_PRAGMAS
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_RTREE
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_FTS4=1
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS=1
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC=1
!ENDIF
@ -966,7 +971,7 @@ Replace.exe:
sqlite3.def: Replace.exe $(LIBOBJ)
echo EXPORTS > sqlite3.def
dumpbin /all $(LIBOBJ) \
| .\Replace.exe "^\s+/EXPORT:_?(sqlite3(?:session|changeset|changegroup)?_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \
| .\Replace.exe "^\s+/EXPORT:_?(sqlite3(?:session|changeset|changegroup|rebaser)?_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \
| sort >> sqlite3.def
$(SQLITE3EXE): shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H)

115
contrib/sqlite3/configure vendored
View File

@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for sqlite 3.23.1.
# Generated by GNU Autoconf 2.69 for sqlite 3.26.0.
#
# Report bugs to <http://www.sqlite.org>.
#
@ -590,8 +590,8 @@ MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='sqlite'
PACKAGE_TARNAME='sqlite'
PACKAGE_VERSION='3.23.1'
PACKAGE_STRING='sqlite 3.23.1'
PACKAGE_VERSION='3.26.0'
PACKAGE_STRING='sqlite 3.26.0'
PACKAGE_BUGREPORT='http://www.sqlite.org'
PACKAGE_URL=''
@ -637,13 +637,7 @@ am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
SHELL_CFLAGS
ZLIB_FLAGS
EXTRA_SHELL_OBJ
SESSION_FLAGS
JSON1_FLAGS
FTS5_FLAGS
DYNAMIC_EXTENSION_FLAGS
THREADSAFE_FLAGS
READLINE_LIBS
BUILD_CFLAGS
CPP
@ -777,9 +771,13 @@ enable_editline
enable_readline
enable_threadsafe
enable_dynamic_extensions
enable_fts4
enable_fts3
enable_fts5
enable_json1
enable_rtree
enable_session
enable_debug
enable_static_shell
'
ac_precious_vars='build_alias
@ -1332,7 +1330,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures sqlite 3.23.1 to adapt to many kinds of systems.
\`configure' configures sqlite 3.26.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@ -1402,7 +1400,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
short | recursive ) echo "Configuration of sqlite 3.23.1:";;
short | recursive ) echo "Configuration of sqlite 3.26.0:";;
esac
cat <<\_ACEOF
@ -1427,9 +1425,13 @@ Optional Features:
--enable-threadsafe build a thread-safe library [default=yes]
--enable-dynamic-extensions
support loadable extensions [default=yes]
--enable-fts5 include fts5 support [default=no]
--enable-json1 include json1 support [default=no]
--enable-fts4 include fts4 support [default=yes]
--enable-fts3 include fts3 support [default=no]
--enable-fts5 include fts5 support [default=yes]
--enable-json1 include json1 support [default=yes]
--enable-rtree include rtree support [default=yes]
--enable-session enable the session extension [default=no]
--enable-debug build with debugging features enabled [default=no]
--enable-static-shell statically link libsqlite3 into shell tool
[default=yes]
@ -1523,7 +1525,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
sqlite configure 3.23.1
sqlite configure 3.26.0
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@ -1938,7 +1940,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by sqlite $as_me 3.23.1, which was
It was created by sqlite $as_me 3.26.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@ -2804,7 +2806,7 @@ fi
# Define the identity of the package.
PACKAGE='sqlite'
VERSION='3.23.1'
VERSION='3.26.0'
cat >>confdefs.h <<_ACEOF
@ -13040,6 +13042,7 @@ fi
ac_config_files="$ac_config_files Makefile sqlite3.pc"
BUILD_CFLAGS=
#-------------------------------------------------------------------------
@ -13304,9 +13307,8 @@ else
enable_threadsafe=yes
fi
THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
if test x"$enable_threadsafe" != "xno"; then
THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
BUILD_CFLAGS="$BUILD_CFLAGS -D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_create" >&5
$as_echo_n "checking for library containing pthread_create... " >&6; }
if ${ac_cv_search_pthread_create+:} false; then :
@ -13420,7 +13422,6 @@ if test "$ac_res" != no; then :
fi
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -13491,13 +13492,40 @@ if test "$ac_res" != no; then :
fi
else
DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_OMIT_LOAD_EXTENSION=1"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for whether to support dynamic extensions" >&5
$as_echo_n "checking for whether to support dynamic extensions... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_dynamic_extensions" >&5
$as_echo "$enable_dynamic_extensions" >&6; }
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-fts4
#
# Check whether --enable-fts4 was given.
if test "${enable_fts4+set}" = set; then :
enableval=$enable_fts4;
else
enable_fts4=yes
fi
if test x"$enable_fts4" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS4"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-fts3
#
# Check whether --enable-fts3 was given.
if test "${enable_fts3+set}" = set; then :
enableval=$enable_fts3;
fi
if test x"$enable_fts3" = "xyes" -a x"$enable_fts4" = "xno"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS3"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -13507,7 +13535,7 @@ $as_echo "$enable_dynamic_extensions" >&6; }
if test "${enable_fts5+set}" = set; then :
enableval=$enable_fts5;
else
enable_fts5=no
enable_fts5=yes
fi
if test x"$enable_fts5" = "xyes"; then
@ -13567,9 +13595,8 @@ if test "$ac_res" != no; then :
fi
FTS5_FLAGS=-DSQLITE_ENABLE_FTS5
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS5"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -13579,13 +13606,27 @@ fi
if test "${enable_json1+set}" = set; then :
enableval=$enable_json1;
else
enable_json1=no
enable_json1=yes
fi
if test x"$enable_json1" = "xyes"; then
JSON1_FLAGS=-DSQLITE_ENABLE_JSON1
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_JSON1"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-rtree
#
# Check whether --enable-rtree was given.
if test "${enable_rtree+set}" = set; then :
enableval=$enable_rtree;
else
enable_rtree=yes
fi
if test x"$enable_rtree" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_RTREE"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -13594,14 +13635,25 @@ fi
# Check whether --enable-session was given.
if test "${enable_session+set}" = set; then :
enableval=$enable_session;
else
enable_session=no
fi
if test x"$enable_session" = "xyes"; then
SESSION_FLAGS="-DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK"
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-debug
#
# Check whether --enable-debug was given.
if test "${enable_debug+set}" = set; then :
enableval=$enable_debug;
fi
if test x"$enable_debug" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_DEBUG -DSQLITE_ENABLE_SELECTTRACE -DSQLITE_ENABLE_WHERETRACE"
CFLAGS="-g -O0"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -13694,7 +13746,7 @@ $as_echo "$ac_cv_search_deflate" >&6; }
ac_res=$ac_cv_search_deflate
if test "$ac_res" != no; then :
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
ZLIB_FLAGS="-DSQLITE_HAVE_ZLIB"
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_HAVE_ZLIB"
fi
@ -13703,7 +13755,6 @@ fi
done
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing system" >&5
$as_echo_n "checking for library containing system... " >&6; }
if ${ac_cv_search_system+:} false; then :
@ -14359,7 +14410,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by sqlite $as_me 3.23.1, which was
This file was extended by sqlite $as_me 3.26.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@ -14416,7 +14467,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
sqlite config.status 3.23.1
sqlite config.status 3.26.0
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"

77
contrib/sqlite3/configure.ac
View File

@ -10,7 +10,7 @@
#
AC_PREREQ(2.61)
AC_INIT(sqlite, 3.23.1, http://www.sqlite.org)
AC_INIT(sqlite, 3.26.0, http://www.sqlite.org)
AC_CONFIG_SRCDIR([sqlite3.c])
AC_CONFIG_AUX_DIR([.])
@ -29,6 +29,7 @@ AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
AC_FUNC_STRERROR_R
AC_CONFIG_FILES([Makefile sqlite3.pc])
BUILD_CFLAGS=
AC_SUBST(BUILD_CFLAGS)
#-------------------------------------------------------------------------
@ -86,13 +87,11 @@ AC_SUBST(READLINE_LIBS)
AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
[--enable-threadsafe], [build a thread-safe library [default=yes]])],
[], [enable_threadsafe=yes])
THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
if test x"$enable_threadsafe" != "xno"; then
THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
BUILD_CFLAGS="$BUILD_CFLAGS -D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
AC_SEARCH_LIBS(pthread_create, pthread)
AC_SEARCH_LIBS(pthread_mutexattr_init, pthread)
fi
AC_SUBST(THREADSAFE_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -104,36 +103,66 @@ AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
if test x"$enable_dynamic_extensions" != "xno"; then
AC_SEARCH_LIBS(dlopen, dl)
else
DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_OMIT_LOAD_EXTENSION=1"
fi
AC_MSG_CHECKING([for whether to support dynamic extensions])
AC_MSG_RESULT($enable_dynamic_extensions)
AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-fts4
#
AC_ARG_ENABLE(fts4, [AS_HELP_STRING(
[--enable-fts4], [include fts4 support [default=yes]])],
[], [enable_fts4=yes])
if test x"$enable_fts4" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS4"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-fts3
#
AC_ARG_ENABLE(fts3, [AS_HELP_STRING(
[--enable-fts3], [include fts3 support [default=no]])],
[], [])
if test x"$enable_fts3" = "xyes" -a x"$enable_fts4" = "xno"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS3"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-fts5
#
AC_ARG_ENABLE(fts5, [AS_HELP_STRING(
[--enable-fts5], [include fts5 support [default=no]])],
[], [enable_fts5=no])
[--enable-fts5], [include fts5 support [default=yes]])],
[], [enable_fts5=yes])
if test x"$enable_fts5" = "xyes"; then
AC_SEARCH_LIBS(log, m)
FTS5_FLAGS=-DSQLITE_ENABLE_FTS5
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS5"
fi
AC_SUBST(FTS5_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-json1
#
AC_ARG_ENABLE(json1, [AS_HELP_STRING(
[--enable-json1], [include json1 support [default=no]])],
[], [enable_json1=no])
[--enable-json1], [include json1 support [default=yes]])],
[],[enable_json1=yes])
if test x"$enable_json1" = "xyes"; then
JSON1_FLAGS=-DSQLITE_ENABLE_JSON1
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_JSON1"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-rtree
#
AC_ARG_ENABLE(rtree, [AS_HELP_STRING(
[--enable-rtree], [include rtree support [default=yes]])],
[], [enable_rtree=yes])
if test x"$enable_rtree" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_RTREE"
fi
AC_SUBST(JSON1_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -141,11 +170,22 @@ AC_SUBST(JSON1_FLAGS)
#
AC_ARG_ENABLE(session, [AS_HELP_STRING(
[--enable-session], [enable the session extension [default=no]])],
[], [enable_session=no])
[], [])
if test x"$enable_session" = "xyes"; then
SESSION_FLAGS="-DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK"
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK"
fi
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# --enable-debug
#
AC_ARG_ENABLE(debug, [AS_HELP_STRING(
[--enable-debug], [build with debugging features enabled [default=no]])],
[], [])
if test x"$enable_debug" = "xyes"; then
BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_DEBUG -DSQLITE_ENABLE_SELECTTRACE -DSQLITE_ENABLE_WHERETRACE"
CFLAGS="-g -O0"
fi
AC_SUBST(SESSION_FLAGS)
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
@ -165,9 +205,8 @@ AC_SUBST(EXTRA_SHELL_OBJ)
AC_CHECK_FUNCS(posix_fallocate)
AC_CHECK_HEADERS(zlib.h,[
AC_SEARCH_LIBS(deflate,z,[ZLIB_FLAGS="-DSQLITE_HAVE_ZLIB"])
AC_SEARCH_LIBS(deflate,z,[BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_HAVE_ZLIB"])
])
AC_SUBST(ZLIB_FLAGS)
AC_SEARCH_LIBS(system,,,[SHELL_CFLAGS="-DSQLITE_NOHAVE_SYSTEM"])
AC_SUBST(SHELL_CFLAGS)

1231
contrib/sqlite3/shell.c
View File

File diff suppressed because it is too large Load Diff

28180
contrib/sqlite3/sqlite3.c
View File

File diff suppressed because it is too large Load Diff

694
contrib/sqlite3/sqlite3.h
View File

File diff suppressed because it is too large Load Diff

43
contrib/sqlite3/sqlite3ext.h
View File

@ -295,6 +295,30 @@ struct sqlite3_api_routines {
int (*vtab_nochange)(sqlite3_context*);
int (*value_nochange)(sqlite3_value*);
const char *(*vtab_collation)(sqlite3_index_info*,int);
/* Version 3.24.0 and later */
int (*keyword_count)(void);
int (*keyword_name)(int,const char**,int*);
int (*keyword_check)(const char*,int);
sqlite3_str *(*str_new)(sqlite3*);
char *(*str_finish)(sqlite3_str*);
void (*str_appendf)(sqlite3_str*, const char *zFormat, ...);
void (*str_vappendf)(sqlite3_str*, const char *zFormat, va_list);
void (*str_append)(sqlite3_str*, const char *zIn, int N);
void (*str_appendall)(sqlite3_str*, const char *zIn);
void (*str_appendchar)(sqlite3_str*, int N, char C);
void (*str_reset)(sqlite3_str*);
int (*str_errcode)(sqlite3_str*);
int (*str_length)(sqlite3_str*);
char *(*str_value)(sqlite3_str*);
/* Version 3.25.0 and later */
int (*create_window_function)(sqlite3*,const char*,int,int,void*,
void (*xStep)(sqlite3_context*,int,sqlite3_value**),
void (*xFinal)(sqlite3_context*),
void (*xValue)(sqlite3_context*),
void (*xInv)(sqlite3_context*,int,sqlite3_value**),
void(*xDestroy)(void*));
/* Version 3.26.0 and later */
const char *(*normalized_sql)(sqlite3_stmt*);
};
/*
@ -565,6 +589,25 @@ typedef int (*sqlite3_loadext_entry)(
#define sqlite3_vtab_nochange sqlite3_api->vtab_nochange
#define sqlite3_value_nochange sqlite3_api->value_nochange
#define sqlite3_vtab_collation sqlite3_api->vtab_collation
/* Version 3.24.0 and later */
#define sqlite3_keyword_count sqlite3_api->keyword_count
#define sqlite3_keyword_name sqlite3_api->keyword_name
#define sqlite3_keyword_check sqlite3_api->keyword_check
#define sqlite3_str_new sqlite3_api->str_new
#define sqlite3_str_finish sqlite3_api->str_finish
#define sqlite3_str_appendf sqlite3_api->str_appendf
#define sqlite3_str_vappendf sqlite3_api->str_vappendf
#define sqlite3_str_append sqlite3_api->str_append
#define sqlite3_str_appendall sqlite3_api->str_appendall
#define sqlite3_str_appendchar sqlite3_api->str_appendchar
#define sqlite3_str_reset sqlite3_api->str_reset
#define sqlite3_str_errcode sqlite3_api->str_errcode
#define sqlite3_str_length sqlite3_api->str_length
#define sqlite3_str_value sqlite3_api->str_value
/* Version 3.25.0 and later */
#define sqlite3_create_window_function sqlite3_api->create_window_function
/* Version 3.26.0 and later */
#define sqlite3_normalized_sql sqlite3_api->normalized_sql
#endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */
#if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION)

440
contrib/sqlite3/tea/Makefile.in Normal file
View File

@ -0,0 +1,440 @@
# Makefile.in --
#
# This file is a Makefile for Sample TEA Extension. If it has the name
# "Makefile.in" then it is a template for a Makefile; to generate the
# actual Makefile, run "./configure", which is a configuration script
# generated by the "autoconf" program (constructs like "@foo@" will get
# replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
#========================================================================
# Add additional lines to handle any additional AC_SUBST cases that
# have been added in a customized configure script.
#========================================================================
#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@
#========================================================================
# Nothing of the variables below this line should need to be changed.
# Please check the TARGETS section below to make sure the make targets
# are correct.
#========================================================================
#========================================================================
# The names of the source files is defined in the configure script.
# The object files are used for linking into the final library.
# This will be used when a dist target is added to the Makefile.
# It is not important to specify the directory, as long as it is the
# $(srcdir) or in the generic, win or unix subdirectory.
#========================================================================
PKG_SOURCES = @PKG_SOURCES@
PKG_OBJECTS = @PKG_OBJECTS@
PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
#========================================================================
# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
# this package that need to be installed, if any.
#========================================================================
PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
#========================================================================
# This is a list of public header files to be installed, if any.
#========================================================================
PKG_HEADERS = @PKG_HEADERS@
#========================================================================
# "PKG_LIB_FILE" refers to the library (dynamic or static as per
# configuration options) composed of the named objects.
#========================================================================
PKG_LIB_FILE = @PKG_LIB_FILE@
PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
lib_BINARIES = $(PKG_LIB_FILE)
BINARIES = $(lib_BINARIES)
SHELL = @SHELL@
srcdir = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@
datarootdir = @datarootdir@
datadir = @datadir@
mandir = @mandir@
includedir = @includedir@
DESTDIR =
PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION)
pkgdatadir = $(datadir)/$(PKG_DIR)
pkglibdir = $(libdir)/$(PKG_DIR)
pkgincludedir = $(includedir)/$(PKG_DIR)
top_builddir = .
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
CC = @CC@
CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
CFLAGS_WARNING = @CFLAGS_WARNING@
CLEANFILES = @CLEANFILES@
EXEEXT = @EXEEXT@
LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
MAKE_LIB = @MAKE_LIB@
MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
MAKE_STUB_LIB = @MAKE_STUB_LIB@
OBJEXT = @OBJEXT@
RANLIB = @RANLIB@
RANLIB_STUB = @RANLIB_STUB@
SHLIB_CFLAGS = @SHLIB_CFLAGS@
SHLIB_LD = @SHLIB_LD@
SHLIB_LD_LIBS = @SHLIB_LD_LIBS@
STLIB_LD = @STLIB_LD@
#TCL_DEFS = @TCL_DEFS@
TCL_BIN_DIR = @TCL_BIN_DIR@
TCL_SRC_DIR = @TCL_SRC_DIR@
#TK_BIN_DIR = @TK_BIN_DIR@
#TK_SRC_DIR = @TK_SRC_DIR@
# This is no longer necessary even for packages that use private Tcl headers
#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@
# Not used, but retained for reference of what libs Tcl required
#TCL_LIBS = @TCL_LIBS@
#========================================================================
# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
# package without installing. The other environment variables allow us
# to test against an uninstalled Tcl. Add special env vars that you
# require for testing here (like TCLX_LIBRARY).
#========================================================================
EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR)
#EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
TCLLIBPATH = $(top_builddir)
TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
PATH="$(EXTRA_PATH):$(PATH)" \
TCLLIBPATH="$(TCLLIBPATH)"
# TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
TCLSH_PROG = @TCLSH_PROG@
TCLSH = $(TCLSH_ENV) $(TCLSH_PROG)
#WISH_PROG = @WISH_PROG@
#WISH = $(TCLSH_ENV) $(WISH_PROG)
SHARED_BUILD = @SHARED_BUILD@
INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/..
#INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
PKG_CFLAGS = @PKG_CFLAGS@
# TCL_DEFS is not strictly need here, but if you remove it, then you
# must make sure that configure.in checks for the necessary components
# that your library may use. TCL_DEFS can actually be a problem if
# you do not compile with a similar machine setup as the Tcl core was
# compiled with.
#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
DEFS = @DEFS@ $(PKG_CFLAGS)
CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
CPPFLAGS = @CPPFLAGS@
LIBS = @PKG_LIBS@ @LIBS@
AR = @AR@
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
#========================================================================
# Start of user-definable TARGETS section
#========================================================================
#========================================================================
# TEA TARGETS. Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries. Modify these targets so that they install
# the various pieces of your package. The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================
all: binaries libraries doc
#========================================================================
# The binaries target builds executable programs, Windows .dll's, unix
# shared/static libraries, and any other platform-dependent files.
# The list of targets to build for "binaries:" is specified at the top
# of the Makefile, in the "BINARIES" variable.
#========================================================================
binaries: $(BINARIES)
libraries:
#========================================================================
# Your doc target should differentiate from doc builds (by the developer)
# and doc installs (see install-doc), which just install the docs on the
# end user machine when building from source.
#========================================================================
doc:
@echo "If you have documentation to create, place the commands to"
@echo "build the docs in the 'doc:' target. For example:"
@echo " xml2nroff sample.xml > sample.n"
@echo " xml2html sample.xml > sample.html"
install: all install-binaries install-libraries install-doc
install-binaries: binaries install-lib-binaries install-bin-binaries
#========================================================================
# This rule installs platform-independent files, such as header files.
# The list=...; for p in $$list handles the empty list case x-platform.
#========================================================================
install-libraries: libraries
@mkdir -p $(DESTDIR)$(includedir)
@echo "Installing header files in $(DESTDIR)$(includedir)"
@list='$(PKG_HEADERS)'; for i in $$list; do \
echo "Installing $(srcdir)/$$i" ; \
$(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
done;
#========================================================================
# Install documentation. Unix manpages should go in the $(mandir)
# directory.
#========================================================================
install-doc: doc
@mkdir -p $(DESTDIR)$(mandir)/mann
@echo "Installing documentation in $(DESTDIR)$(mandir)"
@list='$(srcdir)/doc/*.n'; for i in $$list; do \
echo "Installing $$i"; \
rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
$(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
done
test: binaries libraries
@echo "SQLite TEA distribution does not include tests"
shell: binaries libraries
@$(TCLSH) $(SCRIPT)
gdb:
$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
depend:
#========================================================================
# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above. That will ensure that this target is built when you
# run "make binaries".
#
# The $(PKG_OBJECTS) objects are created and linked into the final
# library. In most cases these object files will correspond to the
# source files above.
#========================================================================
$(PKG_LIB_FILE): $(PKG_OBJECTS)
-rm -f $(PKG_LIB_FILE)
${MAKE_LIB}
$(RANLIB) $(PKG_LIB_FILE)
$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
-rm -f $(PKG_STUB_LIB_FILE)
${MAKE_STUB_LIB}
$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
#========================================================================
# We need to enumerate the list of .c to .o lines here.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension. If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# sample.$(OBJEXT): $(srcdir)/generic/sample.c
# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the makefile
# to look into these paths when resolving .c to .obj dependencies.
# As necessary, add $(srcdir):$(srcdir)/compat:....
#========================================================================
VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
.c.@OBJEXT@:
$(COMPILE) -c `@CYGPATH@ $<` -o $@
#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================
#COMPRESS = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
COMPRESS = gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT = /tmp/dist
DIST_DIR = $(DIST_ROOT)/$(PKG_DIR)
dist-clean:
rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
dist: dist-clean
mkdir -p $(DIST_DIR)
cp -p $(srcdir)/README* $(srcdir)/license* \
$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
$(DIST_DIR)/
chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
for i in $(srcdir)/*.[ch]; do \
if [ -f $$i ]; then \
cp -p $$i $(DIST_DIR)/ ; \
fi; \
done;
mkdir $(DIST_DIR)/tclconfig
cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
$(DIST_DIR)/tclconfig/
chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
chmod +x $(DIST_DIR)/tclconfig/install-sh
list='demos doc generic library mac tests unix win'; \
for p in $$list; do \
if test -d $(srcdir)/$$p ; then \
mkdir $(DIST_DIR)/$$p; \
cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
fi; \
done
(cd $(DIST_ROOT); $(COMPRESS);)
#========================================================================
# End of user-definable section
#========================================================================
#========================================================================
# Don't modify the file to clean here. Instead, set the "CLEANFILES"
# variable in configure.in
#========================================================================
clean:
-test -z "$(BINARIES)" || rm -f $(BINARIES)
-rm -f *.$(OBJEXT) core *.core
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean: clean
-rm -f *.tab.c
-rm -f $(CONFIG_CLEAN_FILES)
-rm -f config.h config.cache config.log config.status
#========================================================================
# Install binary object libraries. On Windows this includes both .dll and
# .lib files. Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.
# In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh shell)
#
# You should not have to modify this target.
#========================================================================
install-lib-binaries: binaries
@mkdir -p $(DESTDIR)$(pkglibdir)
@list='$(lib_BINARIES)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
if test "x$$stub" = "xstub"; then \
echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
else \
echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
fi; \
ext=`echo $$p|sed -e "s/.*\.//"`; \
if test "x$$ext" = "xdll"; then \
lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
if test -f $$lib; then \
echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
$(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
fi; \
fi; \
fi; \
done
@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
if test -f $(srcdir)/$$p; then \
destp=`basename $$p`; \
echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
$(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
fi; \
done
@if test "x$(SHARED_BUILD)" = "x1"; then \
echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
$(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
fi
#========================================================================
# Install binary executables (e.g. .exe files and dependent .dll files)
# This is for files that must go in the bin directory (located next to
# wish and tclsh), like dependent .dll files on Windows.
#
# You should not have to modify this target, except to define bin_BINARIES
# above if necessary.
#========================================================================
install-bin-binaries: binaries
@mkdir -p $(DESTDIR)$(bindir)
@list='$(bin_BINARIES)'; for p in $$list; do \
if test -f $$p; then \
echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
fi; \
done
.SUFFIXES: .c .$(OBJEXT)
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
uninstall-binaries:
list='$(lib_BINARIES)'; for p in $$list; do \
rm -f $(DESTDIR)$(pkglibdir)/$$p; \
done
list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
p=`basename $$p`; \
rm -f $(DESTDIR)$(pkglibdir)/$$p; \
done
list='$(bin_BINARIES)'; for p in $$list; do \
rm -f $(DESTDIR)$(bindir)/$$p; \
done
.PHONY: all binaries clean depend distclean doc install libraries test
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

36
contrib/sqlite3/tea/README Normal file
View File

@ -0,0 +1,36 @@
This is the SQLite extension for Tcl using the Tcl Extension
Architecture (TEA). For additional information on SQLite see
http://www.sqlite.org/
UNIX BUILD
==========
Building under most UNIX systems is easy, just run the configure script
and then run make. For more information about the build process, see
the tcl/unix/README file in the Tcl src dist. The following minimal
example will install the extension in the /opt/tcl directory.
$ cd sqlite-*-tea
$ ./configure --prefix=/opt/tcl
$ make
$ make install
WINDOWS BUILD
=============
The recommended method to build extensions under windows is to use the
Msys + Mingw build process. This provides a Unix-style build while
generating native Windows binaries. Using the Msys + Mingw build tools
means that you can use the same configure script as per the Unix build
to create a Makefile. See the tcl/win/README file for the URL of
the Msys + Mingw download.
If you have VC++ then you may wish to use the files in the win
subdirectory and build the extension using just VC++. These files have
been designed to be as generic as possible but will require some
additional maintenance by the project developer to synchronise with
the TEA configure.in and Makefile.in files. Instructions for using the
VC++ makefile are written in the first part of the Makefile.vc
file.

9
contrib/sqlite3/tea/aclocal.m4 vendored Normal file
View File

@ -0,0 +1,9 @@
#
# Include the TEA standard macro set
#
builtin(include,tclconfig/tcl.m4)
#
# Add here whatever m4 macros you want to define for your package
#

9977
contrib/sqlite3/tea/configure vendored Executable file
View File

File diff suppressed because it is too large Load Diff

201
contrib/sqlite3/tea/configure.ac Normal file
View File

@ -0,0 +1,201 @@
#!/bin/bash -norc
dnl This file is an input file used by the GNU "autoconf" program to
dnl generate the file "configure", which is run during Tcl installation
dnl to configure the system for the local environment.
#
# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
#-----------------------------------------------------------------------
# Sample configure.in for Tcl Extensions. The only places you should
# need to modify this file are marked by the string __CHANGE__
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
# __CHANGE__
# Set your package name and version numbers here.
#
# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
# set as provided. These will also be added as -D defs in your Makefile
# so you can encode the package version directly into the source files.
#-----------------------------------------------------------------------
AC_INIT([sqlite], [3.26.0])
#--------------------------------------------------------------------
# Call TEA_INIT as the first TEA_ macro to set up initial vars.
# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
#--------------------------------------------------------------------
TEA_INIT([3.9])
AC_CONFIG_AUX_DIR(tclconfig)
#--------------------------------------------------------------------
# Load the tclConfig.sh file
#--------------------------------------------------------------------
TEA_PATH_TCLCONFIG
TEA_LOAD_TCLCONFIG
#--------------------------------------------------------------------
# Load the tkConfig.sh file if necessary (Tk extension)
#--------------------------------------------------------------------
#TEA_PATH_TKCONFIG
#TEA_LOAD_TKCONFIG
#-----------------------------------------------------------------------
# Handle the --prefix=... option by defaulting to what Tcl gave.
# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
#-----------------------------------------------------------------------
TEA_PREFIX
#-----------------------------------------------------------------------
# Standard compiler checks.
# This sets up CC by using the CC env var, or looks for gcc otherwise.
# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
# the basic setup necessary to compile executables.
#-----------------------------------------------------------------------
TEA_SETUP_COMPILER
#-----------------------------------------------------------------------
# __CHANGE__
# Specify the C source files to compile in TEA_ADD_SOURCES,
# public headers that need to be installed in TEA_ADD_HEADERS,
# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
# and PKG_TCL_SOURCES.
#-----------------------------------------------------------------------
TEA_ADD_SOURCES([tclsqlite3.c])
TEA_ADD_HEADERS([])
TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
TEA_ADD_LIBS([])
TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1])
TEA_ADD_STUB_SOURCES([])
TEA_ADD_TCL_SOURCES([])
#--------------------------------------------------------------------
# The --with-system-sqlite causes the TCL bindings to SQLite to use
# the system shared library for SQLite rather than statically linking
# against its own private copy. This is dangerous and leads to
# undersirable dependences and is not recommended.
# Patchs from rmax.
#--------------------------------------------------------------------
AC_ARG_WITH([system-sqlite],
[AC_HELP_STRING([--with-system-sqlite],
[use a system-supplied libsqlite3 instead of the bundled one])],
[], [with_system_sqlite=no])
if test x$with_system_sqlite != xno; then
AC_CHECK_HEADER([sqlite3.h],
[AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
[AC_DEFINE(USE_SYSTEM_SQLITE)
LIBS="$LIBS -lsqlite3"])])
fi
#--------------------------------------------------------------------
# __CHANGE__
# Choose which headers you need. Extension authors should try very
# hard to only rely on the Tcl public header files. Internal headers
# contain private data structures and are subject to change without
# notice.
# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
#--------------------------------------------------------------------
TEA_PUBLIC_TCL_HEADERS
#TEA_PRIVATE_TCL_HEADERS
#TEA_PUBLIC_TK_HEADERS
#TEA_PRIVATE_TK_HEADERS
#TEA_PATH_X
#--------------------------------------------------------------------
# Check whether --enable-threads or --disable-threads was given.
# This auto-enables if Tcl was compiled threaded.
#--------------------------------------------------------------------
TEA_ENABLE_THREADS
if test "${TCL_THREADS}" = "1" ; then
AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
# Not automatically added by Tcl because its assumed Tcl links to them,
# but it may not if it isn't really a threaded build.
TEA_ADD_LIBS([$THREADS_LIBS])
else
AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
fi
#--------------------------------------------------------------------
# The statement below defines a collection of symbols related to
# building as a shared library instead of a static library.
#--------------------------------------------------------------------
TEA_ENABLE_SHARED
#--------------------------------------------------------------------
# This macro figures out what flags to use with the compiler/linker
# when building shared/static debug/optimized objects. This information
# can be taken from the tclConfig.sh file, but this figures it all out.
#--------------------------------------------------------------------
TEA_CONFIG_CFLAGS
#--------------------------------------------------------------------
# Set the default compiler switches based on the --enable-symbols option.
#--------------------------------------------------------------------
TEA_ENABLE_SYMBOLS
#--------------------------------------------------------------------
# Everyone should be linking against the Tcl stub library. If you
# can't for some reason, remove this definition. If you aren't using
# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
# link against the non-stubbed Tcl library. Add Tk too if necessary.
#--------------------------------------------------------------------
AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
#--------------------------------------------------------------------
# Redefine fdatasync as fsync on systems that lack fdatasync
#--------------------------------------------------------------------
#
#AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
# Check for library functions that SQLite can optionally use.
AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
AC_FUNC_STRERROR_R
#--------------------------------------------------------------------
# This macro generates a line to use when building a library. It
# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
# and TEA_LOAD_TCLCONFIG macros above.
#--------------------------------------------------------------------
TEA_MAKE_LIB
#--------------------------------------------------------------------
# Determine the name of the tclsh and/or wish executables in the
# Tcl and Tk build directories or the location they were installed
# into. These paths are used to support running test cases only,
# the Makefile should not be making use of these paths to generate
# a pkgIndex.tcl file or anything else at extension build time.
#--------------------------------------------------------------------
TEA_PROG_TCLSH
#TEA_PROG_WISH
#--------------------------------------------------------------------
# Finally, substitute all of the various values into the Makefile.
# You may alternatively have a special pkgIndex.tcl.in or other files
# which require substituting th AC variables in. Include these here.
#--------------------------------------------------------------------
AC_OUTPUT([Makefile pkgIndex.tcl])

15
contrib/sqlite3/tea/doc/sqlite3.n Normal file
View File

@ -0,0 +1,15 @@
.TH sqlite3 n 4.1 "Tcl-Extensions"
.HS sqlite3 tcl
.BS
.SH NAME
sqlite3 \- an interface to the SQLite3 database engine
.SH SYNOPSIS
\fBsqlite3\fI command_name ?filename?\fR
.br
.SH DESCRIPTION
SQLite3 is a self-contains, zero-configuration, transactional SQL database
engine. This extension provides an easy to use interface for accessing
SQLite database files from Tcl.
.PP
For full documentation see \fIhttp://www.sqlite.org/\fR and
in particular \fIhttp://www.sqlite.org/tclsqlite.html\fR.

3793
contrib/sqlite3/tea/generic/tclsqlite3.c Normal file
View File

File diff suppressed because it is too large Load Diff

6
contrib/sqlite3/tea/license.terms Normal file
View File

@ -0,0 +1,6 @@
The author disclaims copyright to this source code. In place of
a legal notice, here is a blessing:
May you do good and not evil.
May you find forgiveness for yourself and forgive others.
May you share freely, never taking more than you give.

7
contrib/sqlite3/tea/pkgIndex.tcl.in Normal file
View File

@ -0,0 +1,7 @@
#
# Tcl package index file
#
# Note sqlite*3* init specifically
#
package ifneeded sqlite3 @PACKAGE_VERSION@ \
[list load [file join $dir @PKG_LIB_FILE@] Sqlite3]

528
contrib/sqlite3/tea/tclconfig/install-sh Normal file
View File

@ -0,0 +1,528 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2011-04-20.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-S $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-S) stripcmd="$stripprog $2"
shift;;
-t) dst_arg=$2
shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
trap "ret=141; $do_exit" 13
trap "ret=143; $do_exit" 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writeable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
-*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test -z "$d" && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

4168
contrib/sqlite3/tea/tclconfig/tcl.m4 Normal file
View File

File diff suppressed because it is too large Load Diff

414
contrib/sqlite3/tea/win/makefile.vc Normal file
View File

@ -0,0 +1,414 @@
# makefile.vc -- -*- Makefile -*-
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
# make it suitable as a general package makefile. Look for the word EDIT
# which marks sections that may need modification. As a minumum you will
# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
# relevant to your package.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001 ActiveState Corporation.
# Copyright (c) 2001-2002 David Gravereaux.
# Copyright (c) 2003 Pat Thoyts
#
#-------------------------------------------------------------------------
# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
#-------------------------------------------------------------------------
!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
MSG = ^
You will need to run vcvars32.bat from Developer Studio, first, to setup^
the environment. Jump to this line to read the new instructions.
!error $(MSG)
!endif
#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1) It is now necessary to have %MSVCDir% set in the environment. This is
# used as a check to see if vcvars32.bat had been run prior to running
# nmake or during the installation of Microsoft Visual C++, MSVCDir had
# been set globally and the PATH adjusted. Either way is valid.
#
# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
# directory to setup the proper environment, if needed, for your current
# setup. This is a needed bootstrap requirement and allows the swapping of
# different environments to be easier.
#
# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
# vcvars32.bat according to the instructions for it. This can also turn on
# the 64-bit compiler, if your SDK has it.
#
# 3) Targets are:
# all -- Builds everything.
# <project> -- Builds the project (eg: nmake sample)
# test -- Builds and runs the test suite.
# install -- Installs the built binaries and libraries to $(INSTALLDIR)
# in an appropriate subdirectory.
# clean/realclean/distclean -- varying levels of cleaning.
#
# 4) Macros usable on the commandline:
# INSTALLDIR=<path>
# Sets where to install Tcl from the built binaries.
# C:\Progra~1\Tcl is assumed when not specified.
#
# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
# Sets special options for the core. The default is for none.
# Any combination of the above may be used (comma separated).
# 'none' will over-ride everything to nothing.
#
# static = Builds a static library of the core instead of a
# dll. The shell will be static (and large), as well.
# msvcrt = Effects the static option only to switch it from
# using libcmt(d) as the C runtime [by default] to
# msvcrt(d). This is useful for static embedding
# support.
# staticpkg = Effects the static option only to switch
# tclshXX.exe to have the dde and reg extension linked
# inside it.
# threads = Turns on full multithreading support.
# thrdalloc = Use the thread allocator (shared global free pool).
# symbols = Adds symbols for step debugging.
# profile = Adds profiling hooks. Map file is assumed.
# loimpact = Adds a flag for how NT treats the heap to keep memory
# in use, low. This is said to impact alloc performance.
#
# STATS=memdbg,compdbg,none
# Sets optional memory and bytecode compiler debugging code added
# to the core. The default is for none. Any combination of the
# above may be used (comma separated). 'none' will over-ride
# everything to nothing.
#
# memdbg = Enables the debugging memory allocator.
# compdbg = Enables byte compilation logging.
#
# MACHINE=(IX86|IA64|ALPHA)
# Set the machine type used for the compiler, linker, and
# resource compiler. This hook is needed to tell the tools
# when alternate platforms are requested. IX86 is the default
# when not specified.
#
# TMP_DIR=<path>
# OUT_DIR=<path>
# Hooks to allow the intermediate and output directories to be
# changed. $(OUT_DIR) is assumed to be
# $(BINROOT)\(Release|Debug) based on if symbols are requested.
# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
# TESTPAT=<file>
# Reads the tests requested to be run from this file.
#
# CFG_ENCODING=encoding
# name of encoding for configuration information. Defaults
# to cp1252
#
# 5) Examples:
#
# Basic syntax of calling nmake looks like this:
# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
# Standard (no frills)
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>nmake -f makefile.vc all
# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
# Building for Win64
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
# Targeting Windows pre64 RETAIL
# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################
#------------------------------------------------------------------------------
!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif
#-------------------------------------------------------------------------
# Project specific information (EDIT)
#
# You should edit this with the name and version of your project. This
# information is used to generate the name of the package library and
# it's install location.
#
# For example, the sample extension is going to build sample04.dll and
# would install it into $(INSTALLDIR)\lib\sample04
#
# You need to specify the object files that need to be linked into your
# binary here.
#
#-------------------------------------------------------------------------
PROJECT = sqlite3
!include "rules.vc"
# nmakehelp -V <file> <tag> will search the file for tag, skips until a
# number and returns all character until a character not in [0-9.ab]
# is read.
!if [echo REM = This file is generated from Makefile.vc > versions.vc]
!endif
# get project version from row "AC_INIT([sqlite], [3.7.14])"
!if [echo DOTVERSION = \>> versions.vc] \
&& [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
!endif
!include "versions.vc"
VERSION = $(DOTVERSION:.=)
STUBPREFIX = $(PROJECT)stub
DLLOBJS = \
$(TMP_DIR)\tclsqlite3.obj
#-------------------------------------------------------------------------
# Target names and paths ( shouldn't need changing )
#-------------------------------------------------------------------------
BINROOT = .
ROOT = ..
PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
### Make sure we use backslash only.
PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
### The following paths CANNOT have spaces in them.
GENERICDIR = $(ROOT)\generic
WINDIR = $(ROOT)\win
LIBDIR = $(ROOT)\library
DOCDIR = $(ROOT)\doc
TOOLSDIR = $(ROOT)\tools
COMPATDIR = $(ROOT)\compat
#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------
!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
cdebug = -O2 -Op -Gs
!else
cdebug =
!endif
!else if "$(MACHINE)" == "IA64"
### Warnings are too many, can't support warnings into errors.
cdebug = -Z7 -Od -GZ
!else
cdebug = -Z7 -WX -Od -GZ
!endif
### Declarations common to all compiler options
cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
!if $(MSVCRT)
!if $(DEBUG)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG)
crt = -MTd
!else
crt = -MT
!endif
!endif
INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
-I"$(ROOT)\.."
BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) \
-DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
-DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
TCL_CFLAGS = -DBUILD_sqlite -DUSE_TCL_STUBS \
-DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
$(OPTDEFINES)
#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------
!if $(DEBUG)
ldebug = -debug:full -debugtype:cv
!else
ldebug = -release -opt:ref -opt:icf,3
!endif
### Declarations common to all linker options
lflags = -nologo -machine:$(MACHINE) $(ldebug)
!if $(PROFILE)
lflags = $(lflags) -profile
!endif
!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags = $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags = $(lflags) -align:4096
!endif
!if $(LOIMPACT)
lflags = $(lflags) -ws:aggressive
!endif
dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows
baselibs = $(TCLSTUBLIB)
#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------
!IF "$(TESTPAT)" != ""
TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!ENDIF
#---------------------------------------------------------------------
# Project specific targets (EDIT)
#---------------------------------------------------------------------
all: setup $(PROJECT)
$(PROJECT): setup $(PRJLIB)
install: install-binaries install-libraries install-docs
# Tests need to ensure we load the right dll file we
# have to handle the output differently on Win9x.
#
!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
test: setup $(PROJECT)
set TCL_LIBRARY=$(ROOT)/library
$(TCLSH) <<
load $(PRJLIB:\=/)
cd "$(ROOT)/tests"
set argv "$(TESTFLAGS)"
source all.tcl
<<
!else
test: setup $(PROJECT)
echo Please wait while the test results are collected
set TCL_LIBRARY=$(ROOT)/library
$(TCLSH) << >tests.log
load $(PRJLIB:\=/)
cd "$(ROOT)/tests"
set argv "$(TESTFLAGS)"
source all.tcl
<<
type tests.log | more
!endif
setup:
@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
$(PRJLIB): $(DLLOBJS)
$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
$**
<<
-@del $*.exp
$(PRJSTUBLIB): $(PRJSTUBOBJS)
$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
#---------------------------------------------------------------------
# Implicit rules
#---------------------------------------------------------------------
{$(WINDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(WINDIR)}.rc{$(TMP_DIR)}.res:
$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
!if $(DEBUG)
-d DEBUG \
!endif
!if $(TCL_THREADS)
-d TCL_THREADS \
!endif
!if $(STATIC_BUILD)
-d STATIC_BUILD \
!endif
$<
.SUFFIXES:
.SUFFIXES:.c .rc
#---------------------------------------------------------------------
# Installation. (EDIT)
#
# You may need to modify this section to reflect the final distribution
# of your files and possibly to generate documentation.
#
#---------------------------------------------------------------------
install-binaries:
@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
install-libraries:
@echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
@if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
@echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
@type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
package ifneeded $(PROJECT) $(DOTVERSION) \
[list load [file join $$dir $(PRJLIBNAME)] sqlite3]
<<
install-docs:
@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------
clean:
@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
realclean: clean
@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
distclean: realclean
@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj

694
contrib/sqlite3/tea/win/nmakehlp.c Normal file
View File

@ -0,0 +1,694 @@
/*
* ----------------------------------------------------------------------------
* nmakehlp.c --
*
* This is used to fix limitations within nmake and the environment.
*
* Copyright (c) 2002 by David Gravereaux.
* Copyright (c) 2006 by Pat Thoyts
*
* See the file "license.terms" for information on usage and redistribution of
* this file, and for a DISCLAIMER OF ALL WARRANTIES.
* ----------------------------------------------------------------------------
*/
#define _CRT_SECURE_NO_DEPRECATE
#include <windows.h>
#define NO_SHLWAPI_GDI
#define NO_SHLWAPI_STREAM
#define NO_SHLWAPI_REG
#include <shlwapi.h>
#pragma comment (lib, "user32.lib")
#pragma comment (lib, "kernel32.lib")
#pragma comment (lib, "shlwapi.lib")
#include <stdio.h>
#include <math.h>
/*
* This library is required for x64 builds with _some_ versions of MSVC
*/
#if defined(_M_IA64) || defined(_M_AMD64)
#if _MSC_VER >= 1400 && _MSC_VER < 1500
#pragma comment(lib, "bufferoverflowU")
#endif
#endif
/* ISO hack for dumb VC++ */
#ifdef _MSC_VER
#define snprintf _snprintf
#endif
/* protos */
static int CheckForCompilerFeature(const char *option);
static int CheckForLinkerFeature(const char *option);
static int IsIn(const char *string, const char *substring);
static int SubstituteFile(const char *substs, const char *filename);
static int QualifyPath(const char *path);
static const char *GetVersionFromFile(const char *filename, const char *match);
static DWORD WINAPI ReadFromPipe(LPVOID args);
/* globals */
#define CHUNK 25
#define STATICBUFFERSIZE 1000
typedef struct {
HANDLE pipe;
char buffer[STATICBUFFERSIZE];
} pipeinfo;
pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
/*
* exitcodes: 0 == no, 1 == yes, 2 == error
*/
int
main(
int argc,
char *argv[])
{
char msg[300];
DWORD dwWritten;
int chars;
/*
* Make sure children (cl.exe and link.exe) are kept quiet.
*/
SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
/*
* Make sure the compiler and linker aren't effected by the outside world.
*/
SetEnvironmentVariable("CL", "");
SetEnvironmentVariable("LINK", "");
if (argc > 1 && *argv[1] == '-') {
switch (*(argv[1]+1)) {
case 'c':
if (argc != 3) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -c <compiler option>\n"
"Tests for whether cl.exe supports an option\n"
"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 2;
}
return CheckForCompilerFeature(argv[2]);
case 'l':
if (argc != 3) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -l <linker option>\n"
"Tests for whether link.exe supports an option\n"
"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 2;
}
return CheckForLinkerFeature(argv[2]);
case 'f':
if (argc == 2) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -f <string> <substring>\n"
"Find a substring within another\n"
"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 2;
} else if (argc == 3) {
/*
* If the string is blank, there is no match.
*/
return 0;
} else {
return IsIn(argv[2], argv[3]);
}
case 's':
if (argc == 2) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -s <substitutions file> <file>\n"
"Perform a set of string map type substutitions on a file\n"
"exitcodes: 0\n",
argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 2;
}
return SubstituteFile(argv[2], argv[3]);
case 'V':
if (argc != 4) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -V filename matchstring\n"
"Extract a version from a file:\n"
"eg: pkgIndex.tcl \"package ifneeded http\"",
argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 0;
}
printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
return 0;
case 'Q':
if (argc != 3) {
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -Q path\n"
"Emit the fully qualified path\n"
"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
&dwWritten, NULL);
return 2;
}
return QualifyPath(argv[2]);
}
}
chars = snprintf(msg, sizeof(msg) - 1,
"usage: %s -c|-f|-l|-Q|-s|-V ...\n"
"This is a little helper app to equalize shell differences between WinNT and\n"
"Win9x and get nmake.exe to accomplish its job.\n",
argv[0]);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
return 2;
}
static int
CheckForCompilerFeature(
const char *option)
{
STARTUPINFO si;
PROCESS_INFORMATION pi;
SECURITY_ATTRIBUTES sa;
DWORD threadID;
char msg[300];
BOOL ok;
HANDLE hProcess, h, pipeThreads[2];
char cmdline[100];
hProcess = GetCurrentProcess();
ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
ZeroMemory(&si, sizeof(STARTUPINFO));
si.cb = sizeof(STARTUPINFO);
si.dwFlags = STARTF_USESTDHANDLES;
si.hStdInput = INVALID_HANDLE_VALUE;
ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
sa.nLength = sizeof(SECURITY_ATTRIBUTES);
sa.lpSecurityDescriptor = NULL;
sa.bInheritHandle = FALSE;
/*
* Create a non-inheritible pipe.
*/
CreatePipe(&Out.pipe, &h, &sa, 0);
/*
* Dupe the write side, make it inheritible, and close the original.
*/
DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
/*
* Same as above, but for the error side.
*/
CreatePipe(&Err.pipe, &h, &sa, 0);
DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
/*
* Base command line.
*/
lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
/*
* Append our option for testing
*/
lstrcat(cmdline, option);
/*
* Filename to compile, which exists, but is nothing and empty.
*/
lstrcat(cmdline, " .\\nul");
ok = CreateProcess(
NULL, /* Module name. */
cmdline, /* Command line. */
NULL, /* Process handle not inheritable. */
NULL, /* Thread handle not inheritable. */
TRUE, /* yes, inherit handles. */
DETACHED_PROCESS, /* No console for you. */
NULL, /* Use parent's environment block. */
NULL, /* Use parent's starting directory. */
&si, /* Pointer to STARTUPINFO structure. */
&pi); /* Pointer to PROCESS_INFORMATION structure. */
if (!ok) {
DWORD err = GetLastError();
int chars = snprintf(msg, sizeof(msg) - 1,
"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
(300-chars), 0);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
return 2;
}
/*
* Close our references to the write handles that have now been inherited.
*/
CloseHandle(si.hStdOutput);
CloseHandle(si.hStdError);
WaitForInputIdle(pi.hProcess, 5000);
CloseHandle(pi.hThread);
/*
* Start the pipe reader threads.
*/
pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
/*
* Block waiting for the process to end.
*/
WaitForSingleObject(pi.hProcess, INFINITE);
CloseHandle(pi.hProcess);
/*
* Wait for our pipe to get done reading, should it be a little slow.
*/
WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
CloseHandle(pipeThreads[0]);
CloseHandle(pipeThreads[1]);
/*
* Look for the commandline warning code in both streams.
* - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
*/
return !(strstr(Out.buffer, "D4002") != NULL
|| strstr(Err.buffer, "D4002") != NULL
|| strstr(Out.buffer, "D9002") != NULL
|| strstr(Err.buffer, "D9002") != NULL
|| strstr(Out.buffer, "D2021") != NULL
|| strstr(Err.buffer, "D2021") != NULL);
}
static int
CheckForLinkerFeature(
const char *option)
{
STARTUPINFO si;
PROCESS_INFORMATION pi;
SECURITY_ATTRIBUTES sa;
DWORD threadID;
char msg[300];
BOOL ok;
HANDLE hProcess, h, pipeThreads[2];
char cmdline[100];
hProcess = GetCurrentProcess();
ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
ZeroMemory(&si, sizeof(STARTUPINFO));
si.cb = sizeof(STARTUPINFO);
si.dwFlags = STARTF_USESTDHANDLES;
si.hStdInput = INVALID_HANDLE_VALUE;
ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
sa.nLength = sizeof(SECURITY_ATTRIBUTES);
sa.lpSecurityDescriptor = NULL;
sa.bInheritHandle = TRUE;
/*
* Create a non-inheritible pipe.
*/
CreatePipe(&Out.pipe, &h, &sa, 0);
/*
* Dupe the write side, make it inheritible, and close the original.
*/
DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
/*
* Same as above, but for the error side.
*/
CreatePipe(&Err.pipe, &h, &sa, 0);
DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
/*
* Base command line.
*/
lstrcpy(cmdline, "link.exe -nologo ");
/*
* Append our option for testing.
*/
lstrcat(cmdline, option);
ok = CreateProcess(
NULL, /* Module name. */
cmdline, /* Command line. */
NULL, /* Process handle not inheritable. */
NULL, /* Thread handle not inheritable. */
TRUE, /* yes, inherit handles. */
DETACHED_PROCESS, /* No console for you. */
NULL, /* Use parent's environment block. */
NULL, /* Use parent's starting directory. */
&si, /* Pointer to STARTUPINFO structure. */
&pi); /* Pointer to PROCESS_INFORMATION structure. */
if (!ok) {
DWORD err = GetLastError();
int chars = snprintf(msg, sizeof(msg) - 1,
"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
(300-chars), 0);
WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
return 2;
}
/*
* Close our references to the write handles that have now been inherited.
*/
CloseHandle(si.hStdOutput);
CloseHandle(si.hStdError);
WaitForInputIdle(pi.hProcess, 5000);
CloseHandle(pi.hThread);
/*
* Start the pipe reader threads.
*/
pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
/*
* Block waiting for the process to end.
*/
WaitForSingleObject(pi.hProcess, INFINITE);
CloseHandle(pi.hProcess);
/*
* Wait for our pipe to get done reading, should it be a little slow.
*/
WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
CloseHandle(pipeThreads[0]);
CloseHandle(pipeThreads[1]);
/*
* Look for the commandline warning code in the stderr stream.
*/
return !(strstr(Out.buffer, "LNK1117") != NULL ||
strstr(Err.buffer, "LNK1117") != NULL ||
strstr(Out.buffer, "LNK4044") != NULL ||
strstr(Err.buffer, "LNK4044") != NULL);
}
static DWORD WINAPI
ReadFromPipe(
LPVOID args)
{
pipeinfo *pi = (pipeinfo *) args;
char *lastBuf = pi->buffer;
DWORD dwRead;
BOOL ok;
again:
if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
CloseHandle(pi->pipe);
return (DWORD)-1;
}
ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
if (!ok || dwRead == 0) {
CloseHandle(pi->pipe);
return 0;
}
lastBuf += dwRead;
goto again;
return 0; /* makes the compiler happy */
}
static int
IsIn(
const char *string,
const char *substring)
{
return (strstr(string, substring) != NULL);
}
/*
* GetVersionFromFile --
* Looks for a match string in a file and then returns the version
* following the match where a version is anything acceptable to
* package provide or package ifneeded.
*/
static const char *
GetVersionFromFile(
const char *filename,
const char *match)
{
size_t cbBuffer = 100;
static char szBuffer[100];
char *szResult = NULL;
FILE *fp = fopen(filename, "rt");
if (fp != NULL) {
/*
* Read data until we see our match string.
*/
while (fgets(szBuffer, cbBuffer, fp) != NULL) {
LPSTR p, q;
p = strstr(szBuffer, match);
if (p != NULL) {
/*
* Skip to first digit.
*/
while (*p && !isdigit(*p)) {
++p;
}
/*
* Find ending whitespace.
*/
q = p;
while (*q && (isalnum(*q) || *q == '.')) {
++q;
}
memcpy(szBuffer, p, q - p);
szBuffer[q-p] = 0;
szResult = szBuffer;
break;
}
}
fclose(fp);
}
return szResult;
}
/*
* List helpers for the SubstituteFile function
*/
typedef struct list_item_t {
struct list_item_t *nextPtr;
char * key;
char * value;
} list_item_t;
/* insert a list item into the list (list may be null) */
static list_item_t *
list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
{
list_item_t *itemPtr = malloc(sizeof(list_item_t));
if (itemPtr) {
itemPtr->key = strdup(key);
itemPtr->value = strdup(value);
itemPtr->nextPtr = NULL;
while(*listPtrPtr) {
listPtrPtr = &(*listPtrPtr)->nextPtr;
}
*listPtrPtr = itemPtr;
}
return itemPtr;
}
static void
list_free(list_item_t **listPtrPtr)
{
list_item_t *tmpPtr, *listPtr = *listPtrPtr;
while (listPtr) {
tmpPtr = listPtr;
listPtr = listPtr->nextPtr;
free(tmpPtr->key);
free(tmpPtr->value);
free(tmpPtr);
}
}
/*
* SubstituteFile --
* As windows doesn't provide anything useful like sed and it's unreliable
* to use the tclsh you are building against (consider x-platform builds -
* eg compiling AMD64 target from IX86) we provide a simple substitution
* option here to handle autoconf style substitutions.
* The substitution file is whitespace and line delimited. The file should
* consist of lines matching the regular expression:
* \s*\S+\s+\S*$
*
* Usage is something like:
* nmakehlp -S << $** > $@
* @PACKAGE_NAME@ $(PACKAGE_NAME)
* @PACKAGE_VERSION@ $(PACKAGE_VERSION)
* <<
*/
static int
SubstituteFile(
const char *substitutions,
const char *filename)
{
size_t cbBuffer = 1024;
static char szBuffer[1024], szCopy[1024];
char *szResult = NULL;
list_item_t *substPtr = NULL;
FILE *fp, *sp;
fp = fopen(filename, "rt");
if (fp != NULL) {
/*
* Build a list of substutitions from the first filename
*/
sp = fopen(substitutions, "rt");
if (sp != NULL) {
while (fgets(szBuffer, cbBuffer, sp) != NULL) {
unsigned char *ks, *ke, *vs, *ve;
ks = (unsigned char*)szBuffer;
while (ks && *ks && isspace(*ks)) ++ks;
ke = ks;
while (ke && *ke && !isspace(*ke)) ++ke;
vs = ke;
while (vs && *vs && isspace(*vs)) ++vs;
ve = vs;
while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
*ke = 0, *ve = 0;
list_insert(&substPtr, (char*)ks, (char*)vs);
}
fclose(sp);
}
/* debug: dump the list */
#ifdef _DEBUG
{
int n = 0;
list_item_t *p = NULL;
for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
}
}
#endif
/*
* Run the substitutions over each line of the input
*/
while (fgets(szBuffer, cbBuffer, fp) != NULL) {
list_item_t *p = NULL;
for (p = substPtr; p != NULL; p = p->nextPtr) {
char *m = strstr(szBuffer, p->key);
if (m) {
char *cp, *op, *sp;
cp = szCopy;
op = szBuffer;
while (op != m) *cp++ = *op++;
sp = p->value;
while (sp && *sp) *cp++ = *sp++;
op += strlen(p->key);
while (*op) *cp++ = *op++;
*cp = 0;
memcpy(szBuffer, szCopy, sizeof(szCopy));
}
}
printf(szBuffer);
}
list_free(&substPtr);
}
fclose(fp);
return 0;
}
/*
* QualifyPath --
*
* This composes the current working directory with a provided path
* and returns the fully qualified and normalized path.
* Mostly needed to setup paths for testing.
*/
static int
QualifyPath(
const char *szPath)
{
char szCwd[MAX_PATH + 1];
char szTmp[MAX_PATH + 1];
char *p;
GetCurrentDirectory(MAX_PATH, szCwd);
while ((p = strchr(szPath, '/')) && *p)
*p = '\\';
PathCombine(szTmp, szCwd, szPath);
PathCanonicalize(szCwd, szTmp);
printf("%s\n", szCwd);
return 0;
}
/*
* Local variables:
* mode: c
* c-basic-offset: 4
* fill-column: 78
* indent-tabs-mode: t
* tab-width: 8
* End:
*/

711
contrib/sqlite3/tea/win/rules.vc Normal file
View File

@ -0,0 +1,711 @@
#------------------------------------------------------------------------------
# rules.vc --
#
# Microsoft Visual C++ makefile include for decoding the commandline
# macros. This file does not need editing to build Tcl.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 2001-2003 David Gravereaux.
# Copyright (c) 2003-2008 Patrick Thoyts
#------------------------------------------------------------------------------
!ifndef _RULES_VC
_RULES_VC = 1
cc32 = $(CC) # built-in default.
link32 = link
lib32 = lib
rc32 = $(RC) # built-in default.
!ifndef INSTALLDIR
### Assume the normal default.
_INSTALLDIR = C:\Program Files\Tcl
!else
### Fix the path separators.
_INSTALLDIR = $(INSTALLDIR:/=\)
!endif
#----------------------------------------------------------
# Set the proper copy method to avoid overwrite questions
# to the user when copying files and selecting the right
# "delete all" method.
#----------------------------------------------------------
!if "$(OS)" == "Windows_NT"
RMDIR = rmdir /S /Q
ERRNULL = 2>NUL
!if ![ver | find "4.0" > nul]
CPY = echo y | xcopy /i >NUL
COPY = copy >NUL
!else
CPY = xcopy /i /y >NUL
COPY = copy /y >NUL
!endif
!else # "$(OS)" != "Windows_NT"
CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
COPY = copy >_JUNK.OUT # On Win98 NUL does not work here.
RMDIR = deltree /Y
NULL = \NUL # Used in testing directory existence
ERRNULL = >NUL # Win9x shell cannot redirect stderr
!endif
MKDIR = mkdir
#------------------------------------------------------------------------------
# Determine the host and target architectures and compiler version.
#------------------------------------------------------------------------------
_HASH=^#
_VC_MANIFEST_EMBED_EXE=
_VC_MANIFEST_EMBED_DLL=
VCVER=0
!if ![echo VCVERSION=_MSC_VER > vercl.x] \
&& ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
&& ![echo ARCH=IX86 >> vercl.x] \
&& ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
&& ![echo ARCH=AMD64 >> vercl.x] \
&& ![echo $(_HASH)endif >> vercl.x] \
&& ![cl -nologo -TC -P vercl.x $(ERRNULL)]
!include vercl.i
!if ![echo VCVER= ^\> vercl.vc] \
&& ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
!include vercl.vc
!endif
!endif
!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
!endif
!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
NATIVE_ARCH=IX86
!else
NATIVE_ARCH=AMD64
!endif
# Since MSVC8 we must deal with manifest resources.
!if $(VCVERSION) >= 1400
_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
!endif
!ifndef MACHINE
MACHINE=$(ARCH)
!endif
!ifndef CFG_ENCODING
CFG_ENCODING = \"cp1252\"
!endif
!message ===============================================================================
#----------------------------------------------------------
# build the helper app we need to overcome nmake's limiting
# environment.
#----------------------------------------------------------
!if !exist(nmakehlp.exe)
!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
!endif
!endif
#----------------------------------------------------------
# Test for compiler features
#----------------------------------------------------------
### test for optimizations
!if [nmakehlp -c -Ot]
!message *** Compiler has 'Optimizations'
OPTIMIZING = 1
!else
!message *** Compiler does not have 'Optimizations'
OPTIMIZING = 0
!endif
OPTIMIZATIONS =
!if [nmakehlp -c -Ot]
OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot
!endif
!if [nmakehlp -c -Oi]
OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi
!endif
!if [nmakehlp -c -Op]
OPTIMIZATIONS = $(OPTIMIZATIONS) -Op
!endif
!if [nmakehlp -c -fp:strict]
OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict
!endif
!if [nmakehlp -c -Gs]
OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs
!endif
!if [nmakehlp -c -GS]
OPTIMIZATIONS = $(OPTIMIZATIONS) -GS
!endif
!if [nmakehlp -c -GL]
OPTIMIZATIONS = $(OPTIMIZATIONS) -GL
!endif
DEBUGFLAGS =
!if [nmakehlp -c -RTC1]
DEBUGFLAGS = $(DEBUGFLAGS) -RTC1
!elseif [nmakehlp -c -GZ]
DEBUGFLAGS = $(DEBUGFLAGS) -GZ
!endif
COMPILERFLAGS =-W3 -DUNICODE -D_UNICODE
# In v13 -GL and -YX are incompatible.
!if [nmakehlp -c -YX]
!if ![nmakehlp -c -GL]
OPTIMIZATIONS = $(OPTIMIZATIONS) -YX
!endif
!endif
!if "$(MACHINE)" == "IX86"
### test for pentium errata
!if [nmakehlp -c -QI0f]
!message *** Compiler has 'Pentium 0x0f fix'
COMPILERFLAGS = $(COMPILERFLAGS) -QI0f
!else
!message *** Compiler does not have 'Pentium 0x0f fix'
!endif
!endif
!if "$(MACHINE)" == "IA64"
### test for Itanium errata
!if [nmakehlp -c -QIA64_Bx]
!message *** Compiler has 'B-stepping errata workarounds'
COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx
!else
!message *** Compiler does not have 'B-stepping errata workarounds'
!endif
!endif
!if "$(MACHINE)" == "IX86"
### test for -align:4096, when align:512 will do.
!if [nmakehlp -l -opt:nowin98]
!message *** Linker has 'Win98 alignment problem'
ALIGN98_HACK = 1
!else
!message *** Linker does not have 'Win98 alignment problem'
ALIGN98_HACK = 0
!endif
!else
ALIGN98_HACK = 0
!endif
LINKERFLAGS =
!if [nmakehlp -l -ltcg]
LINKERFLAGS =-ltcg
!endif
#----------------------------------------------------------
# Decode the options requested.
#----------------------------------------------------------
!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
STATIC_BUILD = 0
TCL_THREADS = 1
DEBUG = 0
SYMBOLS = 0
PROFILE = 0
PGO = 0
MSVCRT = 0
LOIMPACT = 0
TCL_USE_STATIC_PACKAGES = 0
USE_THREAD_ALLOC = 1
UNCHECKED = 0
!else
!if [nmakehlp -f $(OPTS) "static"]
!message *** Doing static
STATIC_BUILD = 1
!else
STATIC_BUILD = 0
!endif
!if [nmakehlp -f $(OPTS) "msvcrt"]
!message *** Doing msvcrt
MSVCRT = 1
!else
MSVCRT = 0
!endif
!if [nmakehlp -f $(OPTS) "staticpkg"]
!message *** Doing staticpkg
TCL_USE_STATIC_PACKAGES = 1
!else
TCL_USE_STATIC_PACKAGES = 0
!endif
!if [nmakehlp -f $(OPTS) "nothreads"]
!message *** Compile explicitly for non-threaded tcl
TCL_THREADS = 0
!else
TCL_THREADS = 1
USE_THREAD_ALLOC= 1
!endif
!if [nmakehlp -f $(OPTS) "symbols"]
!message *** Doing symbols
DEBUG = 1
!else
DEBUG = 0
!endif
!if [nmakehlp -f $(OPTS) "pdbs"]
!message *** Doing pdbs
SYMBOLS = 1
!else
SYMBOLS = 0
!endif
!if [nmakehlp -f $(OPTS) "profile"]
!message *** Doing profile
PROFILE = 1
!else
PROFILE = 0
!endif
!if [nmakehlp -f $(OPTS) "pgi"]
!message *** Doing profile guided optimization instrumentation
PGO = 1
!elseif [nmakehlp -f $(OPTS) "pgo"]
!message *** Doing profile guided optimization
PGO = 2
!else
PGO = 0
!endif
!if [nmakehlp -f $(OPTS) "loimpact"]
!message *** Doing loimpact
LOIMPACT = 1
!else
LOIMPACT = 0
!endif
!if [nmakehlp -f $(OPTS) "thrdalloc"]
!message *** Doing thrdalloc
USE_THREAD_ALLOC = 1
!endif
!if [nmakehlp -f $(OPTS) "tclalloc"]
!message *** Doing tclalloc
USE_THREAD_ALLOC = 0
!endif
!if [nmakehlp -f $(OPTS) "unchecked"]
!message *** Doing unchecked
UNCHECKED = 1
!else
UNCHECKED = 0
!endif
!endif
!if !$(STATIC_BUILD)
# Make sure we don't build overly fat DLLs.
MSVCRT = 1
# We shouldn't statically put the extensions inside the shell when dynamic.
TCL_USE_STATIC_PACKAGES = 0
!endif
#----------------------------------------------------------
# Figure-out how to name our intermediate and output directories.
# We wouldn't want different builds to use the same .obj files
# by accident.
#----------------------------------------------------------
#----------------------------------------
# Naming convention:
# t = full thread support.
# s = static library (as opposed to an
# import library)
# g = linked to the debug enabled C
# run-time.
# x = special static build when it
# links to the dynamic C run-time.
#----------------------------------------
SUFX = tsgx
!if $(DEBUG)
BUILDDIRTOP = Debug
!else
BUILDDIRTOP = Release
!endif
!if "$(MACHINE)" != "IX86"
BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
!endif
!if $(VCVER) > 6
BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
!endif
!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
SUFX = $(SUFX:g=)
!endif
TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
!if !$(STATIC_BUILD)
TMP_DIRFULL = $(TMP_DIRFULL:Static=)
SUFX = $(SUFX:s=)
EXT = dll
!if $(MSVCRT)
TMP_DIRFULL = $(TMP_DIRFULL:X=)
SUFX = $(SUFX:x=)
!endif
!else
TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
EXT = lib
!if !$(MSVCRT)
TMP_DIRFULL = $(TMP_DIRFULL:X=)
SUFX = $(SUFX:x=)
!endif
!endif
!if !$(TCL_THREADS)
TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
SUFX = $(SUFX:t=)
!endif
!ifndef TMP_DIR
TMP_DIR = $(TMP_DIRFULL)
!ifndef OUT_DIR
OUT_DIR = .\$(BUILDDIRTOP)
!endif
!else
!ifndef OUT_DIR
OUT_DIR = $(TMP_DIR)
!endif
!endif
#----------------------------------------------------------
# Decode the statistics requested.
#----------------------------------------------------------
!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
TCL_MEM_DEBUG = 0
TCL_COMPILE_DEBUG = 0
!else
!if [nmakehlp -f $(STATS) "memdbg"]
!message *** Doing memdbg
TCL_MEM_DEBUG = 1
!else
TCL_MEM_DEBUG = 0
!endif
!if [nmakehlp -f $(STATS) "compdbg"]
!message *** Doing compdbg
TCL_COMPILE_DEBUG = 1
!else
TCL_COMPILE_DEBUG = 0
!endif
!endif
#----------------------------------------------------------
# Decode the checks requested.
#----------------------------------------------------------
!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
TCL_NO_DEPRECATED = 0
WARNINGS = -W3
!else
!if [nmakehlp -f $(CHECKS) "nodep"]
!message *** Doing nodep check
TCL_NO_DEPRECATED = 1
!else
TCL_NO_DEPRECATED = 0
!endif
!if [nmakehlp -f $(CHECKS) "fullwarn"]
!message *** Doing full warnings check
WARNINGS = -W4
!if [nmakehlp -l -warn:3]
LINKERFLAGS = $(LINKERFLAGS) -warn:3
!endif
!else
WARNINGS = -W3
!endif
!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
!message *** Doing 64bit portability warnings
WARNINGS = $(WARNINGS) -Wp64
!endif
!endif
!if $(PGO) > 1
!if [nmakehlp -l -ltcg:pgoptimize]
LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
!else
MSG=^
This compiler does not support profile guided optimization.
!error $(MSG)
!endif
!elseif $(PGO) > 0
!if [nmakehlp -l -ltcg:pginstrument]
LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
!else
MSG=^
This compiler does not support profile guided optimization.
!error $(MSG)
!endif
!endif
#----------------------------------------------------------
# Set our defines now armed with our options.
#----------------------------------------------------------
OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
!if $(TCL_MEM_DEBUG)
OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG
!endif
!if $(TCL_COMPILE_DEBUG)
OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
!endif
!if $(TCL_THREADS)
OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1
!if $(USE_THREAD_ALLOC)
OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
!endif
!endif
!if $(STATIC_BUILD)
OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD
!endif
!if $(TCL_NO_DEPRECATED)
OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED
!endif
!if !$(DEBUG)
OPTDEFINES = $(OPTDEFINES) -DNDEBUG
!if $(OPTIMIZING)
OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
!endif
!endif
!if $(PROFILE)
OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED
!endif
!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT
!endif
!if $(VCVERSION) < 1300
OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64
!endif
#----------------------------------------------------------
# Locate the Tcl headers to build against
#----------------------------------------------------------
!if "$(PROJECT)" == "tcl"
_TCL_H = ..\generic\tcl.h
!else
# If INSTALLDIR set to tcl root dir then reset to the lib dir.
!if exist("$(_INSTALLDIR)\include\tcl.h")
_INSTALLDIR=$(_INSTALLDIR)\lib
!endif
!if !defined(TCLDIR)
!if exist("$(_INSTALLDIR)\..\include\tcl.h")
TCLINSTALL = 1
_TCLDIR = $(_INSTALLDIR)\..
_TCL_H = $(_INSTALLDIR)\..\include\tcl.h
TCLDIR = $(_INSTALLDIR)\..
!else
MSG=^
Failed to find tcl.h. Set the TCLDIR macro.
!error $(MSG)
!endif
!else
_TCLDIR = $(TCLDIR:/=\)
!if exist("$(_TCLDIR)\include\tcl.h")
TCLINSTALL = 1
_TCL_H = $(_TCLDIR)\include\tcl.h
!elseif exist("$(_TCLDIR)\generic\tcl.h")
TCLINSTALL = 0
_TCL_H = $(_TCLDIR)\generic\tcl.h
!else
MSG =^
Failed to find tcl.h. The TCLDIR macro does not appear correct.
!error $(MSG)
!endif
!endif
!endif
#--------------------------------------------------------------
# Extract various version numbers from tcl headers
# The generated file is then included in the makefile.
#--------------------------------------------------------------
!if [echo REM = This file is generated from rules.vc > versions.vc]
!endif
!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
&& [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
!endif
!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
&& [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
!endif
!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
&& [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
!endif
# If building the tcl core then we need additional package versions
!if "$(PROJECT)" == "tcl"
!if [echo PKG_HTTP_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
!endif
!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
!endif
!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
!endif
!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
!endif
!if [echo PKG_SHELL_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
!endif
!if [echo PKG_DDE_VER = \>> versions.vc] \
&& [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
!endif
!if [echo PKG_REG_VER =\>> versions.vc] \
&& [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
!endif
!endif
!include versions.vc
#--------------------------------------------------------------
# Setup tcl version dependent stuff headers
#--------------------------------------------------------------
!if "$(PROJECT)" != "tcl"
TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
!if $(TCL_VERSION) < 81
TCL_DOES_STUBS = 0
!else
TCL_DOES_STUBS = 1
!endif
!if $(TCLINSTALL)
TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
!if !exist($(TCLSH)) && $(TCL_THREADS)
TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
!endif
TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
TCL_LIBRARY = $(_TCLDIR)\lib
TCLREGLIB = "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib"
TCLDDELIB = "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib"
COFFBASE = \must\have\tcl\sources\to\build\this\target
TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target
TCL_INCLUDES = -I"$(_TCLDIR)\include"
!else
TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
!if !exist($(TCLSH)) && $(TCL_THREADS)
TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
!endif
TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
TCL_LIBRARY = $(_TCLDIR)\library
TCLREGLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib"
TCLDDELIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib"
COFFBASE = "$(_TCLDIR)\win\coffbase.txt"
TCLTOOLSDIR = $(_TCLDIR)\tools
TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
!endif
!endif
#-------------------------------------------------------------------------
# Locate the Tk headers to build against
#-------------------------------------------------------------------------
!if "$(PROJECT)" == "tk"
_TK_H = ..\generic\tk.h
_INSTALLDIR = $(_INSTALLDIR)\..
!endif
!ifdef PROJECT_REQUIRES_TK
!if !defined(TKDIR)
!if exist("$(_INSTALLDIR)\..\include\tk.h")
TKINSTALL = 1
_TKDIR = $(_INSTALLDIR)\..
_TK_H = $(_TKDIR)\include\tk.h
TKDIR = $(_TKDIR)
!elseif exist("$(_TCLDIR)\include\tk.h")
TKINSTALL = 1
_TKDIR = $(_TCLDIR)
_TK_H = $(_TKDIR)\include\tk.h
TKDIR = $(_TKDIR)
!endif
!else
_TKDIR = $(TKDIR:/=\)
!if exist("$(_TKDIR)\include\tk.h")
TKINSTALL = 1
_TK_H = $(_TKDIR)\include\tk.h
!elseif exist("$(_TKDIR)\generic\tk.h")
TKINSTALL = 0
_TK_H = $(_TKDIR)\generic\tk.h
!else
MSG =^
Failed to find tk.h. The TKDIR macro does not appear correct.
!error $(MSG)
!endif
!endif
!endif
#-------------------------------------------------------------------------
# Extract Tk version numbers
#-------------------------------------------------------------------------
!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk"
!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
&& [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
!endif
!if [echo TK_MINOR_VERSION = \>> versions.vc] \
&& [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
!endif
!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
&& [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
!endif
!include versions.vc
TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
!if "$(PROJECT)" != "tk"
!if $(TKINSTALL)
WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
TK_INCLUDES = -I"$(_TKDIR)\include"
!else
WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
!endif
!endif
!endif
#----------------------------------------------------------
# Display stats being used.
#----------------------------------------------------------
!message *** Intermediate directory will be '$(TMP_DIR)'
!message *** Output directory will be '$(OUT_DIR)'
!message *** Suffix for binaries will be '$(SUFX)'
!message *** Optional defines are '$(OPTDEFINES)'
!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
!message *** Host architecture is $(NATIVE_ARCH)
!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
!message *** Link options '$(LINKERFLAGS)'
!endif