Virgin import of Xircom PCCARD driver v1.17
v1.17 (1999/03/28) has xperimental fixes to 10Mbit autonegotiation and CE2 input lockup. KNOWN BUGS ========== * Media auto-negotiation is definitely not right. It will work in most circumstances and seems to connect OK to most 100Mbit networks, however some pathological combinations of hubs/networks/peers seem to confuse it. * CE2 support is somewhat flakey (ranging from 'works perfectly' to 'hangs the machine' so far). I've fixed the probe routine and a potential lockup in the output routine, but a lot of people still report that they can't receive or transmit. * You won't be able to use the modem and Ethenet parts of a multifunction card simultaneously. This is limitation the current FreeBSD PCMCIA support. Likewise, there is no support for CardBus devices. Developed by: Scott Mitchell <scott@uk.freebsd.org> Obtained from: http://www.freebsd-uk.eu.org/~scott/xe_drv/
This commit is contained in:
David E. O'Brien
parent
26ac8ac24c
commit
d73bc63ef2
@ -23,7 +23,7 @@
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $Id: if_xe.c,v 1.16 1999/03/08 16:28:50 root Exp $
|
||||
* $Id: if_xe.c,v 1.17 1999/03/28 20:27:24 scott Exp $
|
||||
*/
|
||||
|
||||
/*
|
||||
@ -60,28 +60,29 @@
|
||||
*/
|
||||
|
||||
/*
|
||||
* FreeBSD device driver for Xircom CreditCard PCMCIA Ethernet adapters.
|
||||
* The following cards and media are supported (Ethernet part only on the
|
||||
* multifunction CEM cards):
|
||||
* FreeBSD device driver for Xircom CreditCard PCMCIA Ethernet adapters. The
|
||||
* following cards and media are, or will eventually be, supported (Ethernet
|
||||
* part only on the multifunction CEM cards):
|
||||
* CE2 10BASE-2, 10BASE-T (I think)
|
||||
* CEM28 ditto
|
||||
* CEM33 ditto
|
||||
* CE3 10BASE-T, 100BASE-TX
|
||||
* CEM56 ditto
|
||||
* RealPort ditto
|
||||
* Some Compaq and Intel cards using the Xircom hardware are also known to
|
||||
* Compaq and Intel cards using the Xircom CE3 hardware are also known to
|
||||
* work. See the website for full details of supported hardware.
|
||||
*
|
||||
* <Acknowledgements to go here>
|
||||
* Thanks to all who assisted with the development and testing of the driver,
|
||||
* especially: Werner Koch, Duke Kamstra, Duncan Barclay, Ade Lovett, Jason
|
||||
* George, Dru Nelson, Mike Kephart, Bill Rainey and Douglas Rand. Apologies
|
||||
* if I've left out anyone who deserves a mention here.
|
||||
*
|
||||
* The web page for the driver is located at:
|
||||
* http://www.dcs.qmw.ac.uk/~scott/xe_drv/
|
||||
* Check here first for new releases, bug fixes, etc.
|
||||
* Driver web page: http://www.freebsd-uk.eu.org/~scott/xe_drv/
|
||||
*
|
||||
* Please send all feedback, bug reports, patches, etc. to
|
||||
* <scott@dcs.qmw.ac.uk>. Mail with the tag "[XE]" in the subject line will
|
||||
* be automatically filed in an appropriate folder where I'm more likely to
|
||||
* see it and respond promptly.
|
||||
* Mailing list: http://www.lovett.com/lists/freebsd-xircom/
|
||||
* or send "subscribe freebsd-xircom" to <majordomo@lovett.com>
|
||||
*
|
||||
* Author email: <scott@freebsd-uk.eu.org>
|
||||
*/
|
||||
|
||||
#define XE_DEBUG 1
|
||||
@ -303,6 +304,9 @@ struct isa_driver xedriver = {
|
||||
*/
|
||||
static int
|
||||
xe_probe (struct isa_device *dev) {
|
||||
#ifdef XE_DEBUG
|
||||
printf("xe: probe\n");
|
||||
#endif
|
||||
bzero(sca, MAXSLOT * sizeof(sca[0]));
|
||||
return 0;
|
||||
}
|
||||
@ -383,6 +387,7 @@ xe_card_init(struct pccard_devinfo *devi)
|
||||
* XXX - If the stuff we need isn't in attribute memory, or (worse yet)
|
||||
* XXX - attribute memory isn't mapped, we're FUBAR. Maybe need to do an
|
||||
* XXX - ioctl on the card device and follow links?
|
||||
* XXX - Not really the driver's problem, PCCARD should handle all this!
|
||||
*/
|
||||
if ((rc = cdevsw[CARD_MAJOR]->d_read(makedev(CARD_MAJOR, devi->slt->slotnum), &uios, 0)) == 0) {
|
||||
|
||||
@ -942,7 +947,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
|
||||
* any outstanding collisions count will be held against the next
|
||||
* frame to be successfully sent. Hopefully it averages out in the
|
||||
* end!
|
||||
* XXX - This will screw up if tx_collisions/sent > 14.
|
||||
* XXX - This will screw up if tx_collisions/sent > 14. FIX IT!
|
||||
*/
|
||||
switch (scp->tx_collisions) {
|
||||
case 0:
|
||||
@ -1065,10 +1070,13 @@ xe_card_intr(struct pccard_devinfo *devi) {
|
||||
int i;
|
||||
|
||||
/*
|
||||
* XXX - this i-- seems very wrong, but it's what the Linux guys
|
||||
* XXX - This i-- seems very wrong, but it's what the Linux guys
|
||||
* XXX - do. Need someone with an old CE2 to test this for me.
|
||||
* XXX - 99/3/28: Changed the first i-- to an i++, maybe that'll
|
||||
* XXX - fix it? It seems as though the previous version would
|
||||
* XXX - have caused an infinite loop (what, another one?).
|
||||
*/
|
||||
for (i = 0; i < len; i--, rhs++) {
|
||||
for (i = 0; i < len; i++, rhs++) {
|
||||
((char *)ehp)[i] = XE_INB(XE_EDP);
|
||||
if (rhs = 0x8000) {
|
||||
rhs = 0;
|
||||
@ -1139,7 +1147,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
|
||||
XE_SELECT_PAGE(psr); /* Restore saved page */
|
||||
XE_OUTB(XE_CR, XE_CR_ENABLE_INTR); /* Re-enable interrupts */
|
||||
|
||||
/* XXX - Maybe force an int here, instead of dropping packets? */
|
||||
/* XXX - Could force an int here, instead of dropping packets? */
|
||||
/* XXX - XE_OUTB(XE_CR, XE_CR_ENABLE_INTR|XE_CE_FORCE_INTR); */
|
||||
|
||||
return result;
|
||||
@ -1216,7 +1224,7 @@ xe_media_status(struct ifnet *ifp, struct ifmediareq *mrp) {
|
||||
*/
|
||||
static void xe_setmedia(void *xscp) {
|
||||
struct xe_softc *scp = xscp;
|
||||
u_int16_t bmcr, bmsr, anar, lpar, aner;
|
||||
u_int16_t bmcr, bmsr, anar, lpar;
|
||||
|
||||
#ifdef XE_DEBUG
|
||||
printf("xe%d: setmedia\n", scp->unit);
|
||||
@ -1319,10 +1327,24 @@ static void xe_setmedia(void *xscp) {
|
||||
scp->autoneg_status = XE_AUTONEG_NONE;
|
||||
}
|
||||
else {
|
||||
/*
|
||||
* XXX - Bit of a hack going on in here.
|
||||
* XXX - This is derived from Ken Hughes patch to the Linux driver
|
||||
* XXX - to make it work with 10Mbit _autonegotiated_ links on CE3B
|
||||
* XXX - cards. What's a CE3B and how's it differ from a plain CE3?
|
||||
* XXX - these are the things we need to find out.
|
||||
*/
|
||||
xe_phy_writereg(scp, PHY_BMCR, 0x0000);
|
||||
XE_SELECT_PAGE(2);
|
||||
XE_OUTB(XE_MSR, XE_INB(XE_MSR) & ~0x08); /* Disable PHY? */
|
||||
scp->autoneg_status = XE_AUTONEG_FAIL;
|
||||
/* BEGIN HACK */
|
||||
XE_OUTB(XE_MSR, XE_INB(XE_MSR) | 0x08);
|
||||
XE_SELECT_PAGE(0x42);
|
||||
XE_OUTB(XE_SWC1, 0x80);
|
||||
scp->media = IFM_ETHER|IFM_10_T;
|
||||
scp->autoneg_status = XE_AUTONEG_NONE;
|
||||
/* END HACK */
|
||||
/*XE_OUTB(XE_MSR, XE_INB(XE_MSR) & ~0x08);*/ /* Disable PHY? */
|
||||
/*scp->autoneg_status = XE_AUTONEG_FAIL;*/
|
||||
}
|
||||
}
|
||||
else {
|
||||
@ -1558,7 +1580,10 @@ xe_soft_reset(struct xe_softc *scp) {
|
||||
scp->srev = (XE_INB(XE_BOV) & 0x70) >> 4;
|
||||
else
|
||||
scp->srev = (XE_INB(XE_BOV) & 0x30) >> 4;
|
||||
|
||||
#ifdef XE_DEBUG
|
||||
printf("xe%d: silicon revision = %d\n", scp->unit, scp->srev);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Shut off interrupts.
|
||||
*/
|
||||
@ -1692,10 +1717,12 @@ xe_setmulti(struct xe_softc *scp) {
|
||||
* Program the filters for up to 9 addresses
|
||||
*/
|
||||
XE_SELECT_PAGE(0x42);
|
||||
XE_OUTB(XE_SWC1, 0);
|
||||
XE_OUTB(XE_SWC1, 0x01);
|
||||
XE_SELECT_PAGE(0x40);
|
||||
XE_OUTB(XE_OCR, XE_OCR_OFFLINE);
|
||||
/*xe_reg_dump(scp);*/
|
||||
xe_setaddrs(scp);
|
||||
/*xe_reg_dump(scp);*/
|
||||
XE_SELECT_PAGE(0x40);
|
||||
XE_OUTB(XE_OCR, XE_OCR_RX_ENABLE|XE_OCR_ONLINE);
|
||||
}
|
||||
@ -1714,9 +1741,11 @@ xe_setmulti(struct xe_softc *scp) {
|
||||
* Set up all on-chip addresses (for multicast). AFAICS, there are 10
|
||||
* of these things; the first is our MAC address, the other 9 are mcast
|
||||
* addresses, padded with the MAC address if there aren't enough.
|
||||
* XXX - I think the Linux code gets this wrong and only writes one byte for
|
||||
* XXX - each address. I *think* this code does it right, but it needs more
|
||||
* XXX - intensive testing to be sure.
|
||||
* XXX - This doesn't work right, but I'm not sure why yet. We seem to be
|
||||
* XXX - doing much the same as the Linux code, which is weird enough that
|
||||
* XXX - it's probably right (despite my earlier comments to the contrary).
|
||||
* XXX - I wonder if this thing has a multicast hash filter like most other
|
||||
* XXX - Ethernet hardware seems to?
|
||||
*/
|
||||
static void
|
||||
xe_setaddrs(struct xe_softc *scp) {
|
||||
@ -1742,6 +1771,12 @@ xe_setaddrs(struct xe_softc *scp) {
|
||||
}
|
||||
|
||||
for (i = 0; i < 6; i++, byte++) {
|
||||
#ifdef XE_DEBUG
|
||||
if (i)
|
||||
printf(":%x", addr[i]);
|
||||
else
|
||||
printf("xe%d: individual addresses %d: %x", scp->unit, slot, addr[0]);
|
||||
#endif
|
||||
|
||||
if (byte > 15) {
|
||||
page++;
|
||||
@ -1754,7 +1789,11 @@ xe_setaddrs(struct xe_softc *scp) {
|
||||
else
|
||||
XE_OUTB(byte, addr[i]);
|
||||
}
|
||||
#ifdef XE_DEBUG
|
||||
printf("\n");
|
||||
#endif
|
||||
}
|
||||
|
||||
XE_SELECT_PAGE(0);
|
||||
}
|
||||
|
||||
@ -2131,10 +2170,16 @@ xe_phy_writereg(struct xe_softc *scp, u_int16_t reg, u_int16_t data) {
|
||||
|
||||
|
||||
#ifdef XE_DEBUG
|
||||
/*
|
||||
* A bit of debugging code.
|
||||
*/
|
||||
static void
|
||||
xe_mii_dump(struct xe_softc *scp) {
|
||||
int i, unit = scp->dev->id_unit;
|
||||
int i, s;
|
||||
|
||||
s = splimp();
|
||||
|
||||
printf("xe%d: MII registers: ", scp->unit);
|
||||
for (i = 0; i < 2; i++) {
|
||||
printf(" %d:%04x", i, xe_phy_readreg(scp, i));
|
||||
}
|
||||
@ -2142,21 +2187,24 @@ xe_mii_dump(struct xe_softc *scp) {
|
||||
printf(" %d:%04x", i, xe_phy_readreg(scp, i));
|
||||
}
|
||||
printf("\n");
|
||||
|
||||
(void)splx(s);
|
||||
}
|
||||
|
||||
static void
|
||||
xe_reg_dump(struct xe_softc *scp) {
|
||||
int unit = scp->dev->id_unit;
|
||||
int page, i;
|
||||
int page, i, s;
|
||||
|
||||
printf("xe%d: Common registers: ", unit);
|
||||
s = splimp();
|
||||
|
||||
printf("xe%d: Common registers: ", scp->unit);
|
||||
for (i = 0; i < 8; i++) {
|
||||
printf(" %2.2x", XE_INB(i));
|
||||
}
|
||||
printf("\n");
|
||||
|
||||
for (page = 0; page < 8; page++) {
|
||||
printf("xe%d: Register page %2.2x: ", unit, page);
|
||||
for (page = 0; page <= 8; page++) {
|
||||
printf("xe%d: Register page %2.2x: ", scp->unit, page);
|
||||
XE_SELECT_PAGE(page);
|
||||
for (i = 8; i < 16; i++) {
|
||||
printf(" %2.2x", XE_INB(i));
|
||||
@ -2164,16 +2212,21 @@ xe_reg_dump(struct xe_softc *scp) {
|
||||
printf("\n");
|
||||
}
|
||||
|
||||
for (page = 0x40; page < 0x5f; page++) {
|
||||
if (page==0x43 || (page>=0x46 && page<=0x4f) || (page>=0x51 && page<=0x5e))
|
||||
for (page = 0x10; page < 0x5f; page++) {
|
||||
if ((page >= 0x11 && page <= 0x3f) ||
|
||||
(page == 0x41) ||
|
||||
(page >= 0x43 && page <= 0x4f) ||
|
||||
(page >= 0x59))
|
||||
continue;
|
||||
printf("xe%d: Register page %2.2x: ", unit, page);
|
||||
printf("xe%d: Register page %2.2x: ", scp->unit, page);
|
||||
XE_SELECT_PAGE(page);
|
||||
for (i = 8; i < 16; i++) {
|
||||
printf(" %2.2x", XE_INB(i));
|
||||
}
|
||||
printf("\n");
|
||||
}
|
||||
|
||||
(void)splx(s);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user