d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add PCIE power control api:

Browse Source 
o add ah_configPCIE and ah_disablePCIE for drivers to configure PCIE
  power save operation (modeled after ath9k, may need changes)
o add private state flag to indicate if device is PCIE (replaces private
  hack in 5212 code)
o add serdes programming ini bits for 5416 and later parts and setup
  for each part (5416 and 9160 logic hand-crafted from existing routines);
  5212 remains open-coded but is now hooked in via ah_configPCIE
o add PCIE workaround gunk
o add ar5416AttachPCIE for iodomatic code used by 5416 and later parts
This commit is contained in:
sam 2009-02-24 01:07:06 +00:00
parent 78cea5d6be
commit dce1c351b5
15 changed files with 162 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
sys/dev/ath/ath_hal/ah.h
View File

@ -624,6 +624,8 @@ struct ath_hal {
HAL_BOOL bChannelChange, HAL_STATUS *status);
HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *);
HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *);
void __ahdecl(*ah_configPCIE)(struct ath_hal *, HAL_BOOL restore);
void __ahdecl(*ah_disablePCIE)(struct ath_hal *);
void __ahdecl(*ah_setPCUConfig)(struct ath_hal *);
HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*,
struct ieee80211_channel *, HAL_BOOL *);

5
sys/dev/ath/ath_hal/ah_internal.h
View File

@ -269,6 +269,7 @@ struct ath_hal_private {
uint16_t ah_phyRev; /* PHY revision */
uint16_t ah_analog5GhzRev; /* 2GHz radio revision */
uint16_t ah_analog2GhzRev; /* 5GHz radio revision */
uint8_t ah_ispcie; /* PCIE, special treatment */
HAL_OPMODE ah_opmode; /* operating mode from reset */
const struct ieee80211_channel *ah_curchan;/* operating channel */
@ -327,6 +328,10 @@ struct ath_hal_private {
AH_PRIVATE(_ah)->ah_getNfAdjust(_ah, _c)
#define ath_hal_getNoiseFloor(_ah, _nfArray) \
AH_PRIVATE(_ah)->ah_getNoiseFloor(_ah, _nfArray)
#define ath_hal_configPCIE(_ah, _reset) \
(_ah)->ah_configPCIE(_ah, _reset)
#define ath_hal_disablePCIE(_ah) \
(_ah)->ah_disablePCIE(_ah)
#define ath_hal_eepromDetach(_ah) \
AH_PRIVATE(_ah)->ah_eepromDetach(_ah)

15
sys/dev/ath/ath_hal/ar5210/ar5210_attach.c
View File

@ -33,6 +33,9 @@ static HAL_BOOL ar5210GetChannelEdges(struct ath_hal *,
static HAL_BOOL ar5210GetChipPowerLimits(struct ath_hal *ah,
struct ieee80211_channel *chan);
static void ar5210ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore);
static void ar5210DisablePCIE(struct ath_hal *ah);
static const struct ath_hal_private ar5210hal = {{
.ah_magic = AR5210_MAGIC,
.ah_abi = HAL_ABI_VERSION,
@ -44,6 +47,8 @@ static const struct ath_hal_private ar5210hal = {{
.ah_reset = ar5210Reset,
.ah_phyDisable = ar5210PhyDisable,
.ah_disable = ar5210Disable,
.ah_configPCIE = ar5210ConfigPCIE,
.ah_disablePCIE = ar5210DisablePCIE,
.ah_setPCUConfig = ar5210SetPCUConfig,
.ah_perCalibration = ar5210PerCalibration,
.ah_perCalibrationN = ar5210PerCalibrationN,
@ -318,6 +323,16 @@ ar5210GetChipPowerLimits(struct ath_hal *ah, struct ieee80211_channel *chan)
return AH_TRUE;
}
static void
ar5210ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore)
{
}
static void
ar5210DisablePCIE(struct ath_hal *ah)
{
}
/*
* Fill all software cached or static hardware state information.
*/

15
sys/dev/ath/ath_hal/ar5211/ar5211_attach.c
View File

@ -33,6 +33,9 @@ static HAL_BOOL ar5211GetChannelEdges(struct ath_hal *ah,
static HAL_BOOL ar5211GetChipPowerLimits(struct ath_hal *ah,
struct ieee80211_channel *chan);
static void ar5211ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore);
static void ar5211DisablePCIE(struct ath_hal *ah);
static const struct ath_hal_private ar5211hal = {{
.ah_magic = AR5211_MAGIC,
.ah_abi = HAL_ABI_VERSION,
@ -44,6 +47,8 @@ static const struct ath_hal_private ar5211hal = {{
.ah_reset = ar5211Reset,
.ah_phyDisable = ar5211PhyDisable,
.ah_disable = ar5211Disable,
.ah_configPCIE = ar5211ConfigPCIE,
.ah_disablePCIE = ar5211DisablePCIE,
.ah_setPCUConfig = ar5211SetPCUConfig,
.ah_perCalibration = ar5211PerCalibration,
.ah_perCalibrationN = ar5211PerCalibrationN,
@ -440,6 +445,16 @@ ar5211GetChipPowerLimits(struct ath_hal *ah, struct ieee80211_channel *chan)
return AH_TRUE;
}
static void
ar5211ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore)
{
}
static void
ar5211DisablePCIE(struct ath_hal *ah)
{
}
/*
* Fill all software cached or static hardware state information.
*/

2
sys/dev/ath/ath_hal/ar5212/ar2425.c
View File

@ -61,7 +61,7 @@ ar2425WriteRegs(struct ath_hal *ah, u_int modesIndex, u_int freqIndex,
* Bit 0 enables link to go to L1 when MAC goes to sleep.
* Bit 3 enables the loop back the link down to reset.
*/
if (IS_PCIE(ah) && ath_hal_pcieL1SKPEnable) {
if (AH_PRIVATE(ah)->ah_ispcie && && ath_hal_pcieL1SKPEnable) {
OS_REG_WRITE(ah, AR_PCIE_PMC,
AR_PCIE_PMC_ENA_L1 | AR_PCIE_PMC_ENA_RESET);
}

2
sys/dev/ath/ath_hal/ar5212/ar5212.h
View File

@ -356,8 +356,6 @@ struct ath_hal_5212 {
((AH_PRIVATE(ah)->ah_macVersion) == AR_SREV_2417)
#define IS_HB63(ah) (AH5212(ah)->ah_isHb63 == AH_TRUE)
#define IS_PCIE(ah) (IS_5424(ah) || IS_2425(ah))
#define AH_RADIO_MAJOR(ah) \
(AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)
#define AH_RADIO_MINOR(ah) \

80
sys/dev/ath/ath_hal/ar5212/ar5212_attach.c
View File

@ -29,6 +29,9 @@
#define AH_5212_COMMON
#include "ar5212/ar5212.ini"
static void ar5212ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore);
static void ar5212DisablePCIE(struct ath_hal *ah);
static const struct ath_hal_private ar5212hal = {{
.ah_magic = AR5212_MAGIC,
.ah_abi = HAL_ABI_VERSION,
@ -40,6 +43,8 @@ static const struct ath_hal_private ar5212hal = {{
.ah_reset = ar5212Reset,
.ah_phyDisable = ar5212PhyDisable,
.ah_disable = ar5212Disable,
.ah_configPCIE = ar5212ConfigPCIE,
.ah_disablePCIE = ar5212DisablePCIE,
.ah_setPCUConfig = ar5212SetPCUConfig,
.ah_perCalibration = ar5212PerCalibration,
.ah_perCalibrationN = ar5212PerCalibrationN,
@ -154,36 +159,6 @@ static const struct ath_hal_private ar5212hal = {{
.ah_getChipPowerLimits = ar5212GetChipPowerLimits,
};
/*
* Disable PLL when in L0s as well as receiver clock when in L1.
* This power saving option must be enabled through the Serdes.
*
* Programming the Serdes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*
* XXX Clean up the magic numbers.
*/
static void
configurePciePowerSave(struct ath_hal *ah)
{
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
/* RX shut off when elecidle is asserted */
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
/* Shut off PLL and CLKREQ active in L1 */
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
/* Load the new settings */
OS_REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
uint32_t
ar5212GetRadioRev(struct ath_hal *ah)
{
@ -320,7 +295,7 @@ ar5212Attach(uint16_t devid, HAL_SOFTC sc,
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, HAL_STATUS *status)
{
#define AH_EEPROM_PROTECT(ah) \
(IS_PCIE(ah) ? AR_EEPROM_PROTECT_PCIE : AR_EEPROM_PROTECT)
(AH_PRIVATE(ah)->ah_ispcie)? AR_EEPROM_PROTECT_PCIE : AR_EEPROM_PROTECT)
struct ath_hal_5212 *ahp;
struct ath_hal *ah;
struct ath_hal_rf *rf;
@ -352,6 +327,7 @@ ar5212Attach(uint16_t devid, HAL_SOFTC sc,
val = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID;
AH_PRIVATE(ah)->ah_macVersion = val >> AR_SREV_ID_S;
AH_PRIVATE(ah)->ah_macRev = val & AR_SREV_REVISION;
AH_PRIVATE(ah)->ah_ispcie = IS_5424(ah) || IS_2425(ah);
if (!ar5212IsMacSupported(AH_PRIVATE(ah)->ah_macVersion, AH_PRIVATE(ah)->ah_macRev)) {
HALDEBUG(ah, HAL_DEBUG_ANY,
@ -374,9 +350,9 @@ ar5212Attach(uint16_t devid, HAL_SOFTC sc,
AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
if (IS_PCIE(ah)) {
if (AH_PRIVATE(ah)->ah_ispcie) {
/* XXX: build flag to disable this? */
configurePciePowerSave(ah);
ath_hal_configPCIE(ah, AH_FALSE);
}
if (!ar5212ChipTest(ah)) {
@ -466,7 +442,7 @@ ar5212Attach(uint16_t devid, HAL_SOFTC sc,
val = OS_REG_READ(ah, AR_PCICFG);
val = MS(val, AR_PCICFG_EEPROM_SIZE);
if (val == 0) {
if (!IS_PCIE(ah)) {
if (!AH_PRIVATE(ah)->ah_ispcie) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: unsupported EEPROM size %u (0x%x) found\n",
__func__, val, val);
@ -662,6 +638,42 @@ ar5212GetChannelEdges(struct ath_hal *ah,
return AH_FALSE;
}
/*
* Disable PLL when in L0s as well as receiver clock when in L1.
* This power saving option must be enabled through the Serdes.
*
* Programming the Serdes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*
* XXX Clean up the magic numbers.
*/
static void
ar5212ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore)
{
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
/* RX shut off when elecidle is asserted */
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
/* Shut off PLL and CLKREQ active in L1 */
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
OS_REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
/* Load the new settings */
OS_REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
static void
ar5212DisablePCIE(struct ath_hal *ah)
{
/* NB: fill in for 9100 */
}
/*
* Fill all software cached or static hardware state information.
* Return failure if capabilities are to come from EEPROM and

2
sys/dev/ath/ath_hal/ar5212/ar5212_reset.c
View File

@ -1107,7 +1107,7 @@ ar5212SetResetReg(struct ath_hal *ah, uint32_t resetMask)
/* XXX ar5212MacStop & co. */
if (IS_PCIE(ah)) {
if (AH_PRIVATE(ah)->ah_ispcie) {
resetMask &= ~AR_RC_PCI;
}

2
sys/dev/ath/ath_hal/ar5212/ar5413.c
View File

@ -232,7 +232,7 @@ ar5413SetRfRegs(struct ath_hal *ah,
ar5212ModifyRfBuffer(priv->Bank6Data, 1 , 1, 291, 2);
/* Optimum value for rf_pwd_iclobuf2G for PCIe chips only */
if (IS_PCIE(ah)) {
if (AH_PRIVATE(ah)->ah_ispcie) {
ar5212ModifyRfBuffer(priv->Bank6Data, ath_hal_reverseBits(6, 3),
3, 131, 3);
}

2
sys/dev/ath/ath_hal/ar5416/ar5416.h
View File

@ -57,6 +57,7 @@ struct ath_hal_5416 {
HAL_INI_ARRAY ah_ini_bank6;
HAL_INI_ARRAY ah_ini_bank7;
HAL_INI_ARRAY ah_ini_addac;
HAL_INI_ARRAY ah_ini_pcieserdes;
u_int ah_globaltxtimeout; /* global tx timeout */
u_int ah_gpioMask;
@ -89,6 +90,7 @@ extern void ar5416InitState(struct ath_hal_5416 *, uint16_t devid,
HAL_SOFTC sc, HAL_BUS_TAG st, HAL_BUS_HANDLE sh,
HAL_STATUS *status);
extern void ar5416Detach(struct ath_hal *ah);
extern void ar5416AttachPCIE(struct ath_hal *ah);
extern HAL_BOOL ar5416FillCapabilityInfo(struct ath_hal *ah);
#define IS_5GHZ_FAST_CLOCK_EN(_ah, _c) \

16
sys/dev/ath/ath_hal/ar5416/ar5416.ini
View File

@ -14,7 +14,7 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $Id: ar5416.ini,v 1.3 2008/11/10 04:08:04 sam Exp $
* $FreeBSD$
*/
/* Auto Generated PCI Register Writes. Created: 09/20/06 */
@ -686,3 +686,17 @@ static const uint32_t ar5416Addac[][2] = {
{0x0989c, 0x00000000 },
{0x098c4, 0x00000000 },
};
/* hand-crafted from code that does explicit register writes */
static const uint32_t ar5416PciePhy[][2] = {
{ AR_PCIE_SERDES, 0x9248fc00 },
{ AR_PCIE_SERDES, 0x24924924 },
{ AR_PCIE_SERDES, 0x28000039 },
{ AR_PCIE_SERDES, 0x53160824 },
{ AR_PCIE_SERDES, 0xe5980579 },
{ AR_PCIE_SERDES, 0x001defff },
{ AR_PCIE_SERDES, 0x1aaabe40 },
{ AR_PCIE_SERDES, 0xbe105554 },
{ AR_PCIE_SERDES, 0x000e3007 },
{ AR_PCIE_SERDES2, 0x00000000 },
};

27
sys/dev/ath/ath_hal/ar5416/ar5416_attach.c
View File

@ -28,6 +28,8 @@
#include "ar5416/ar5416.ini"
static void ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore);
static void
ar5416AniSetup(struct ath_hal *ah)
{
@ -76,6 +78,7 @@ ar5416InitState(struct ath_hal_5416 *ahp5416, uint16_t devid, HAL_SOFTC sc,
ah->ah_reset = ar5416Reset;
ah->ah_phyDisable = ar5416PhyDisable;
ah->ah_disable = ar5416Disable;
ah->ah_configPCIE = ar5416ConfigPCIE;
ah->ah_perCalibration = ar5416PerCalibration;
ah->ah_perCalibrationN = ar5416PerCalibrationN,
ah->ah_resetCalValid = ar5416ResetCalValid,
@ -219,6 +222,7 @@ ar5416Attach(uint16_t devid, HAL_SOFTC sc,
val = OS_REG_READ(ah, AR_SREV) & AR_SREV_ID;
AH_PRIVATE(ah)->ah_macVersion = val >> AR_SREV_ID_S;
AH_PRIVATE(ah)->ah_macRev = val & AR_SREV_REVISION;
AH_PRIVATE(ah)->ah_ispcie = (devid == AR5416_DEVID_PCIE);
/* setup common ini data; rf backends handle remainder */
HAL_INI_INIT(&ahp->ah_ini_modes, ar5416Modes, 6);
@ -244,6 +248,9 @@ ar5416Attach(uint16_t devid, HAL_SOFTC sc,
HAL_INI_VAL((struct ini *)&AH5416(ah)->ah_ini_addac, 31, 1) = 0;
}
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar5416PciePhy, 2);
ar5416AttachPCIE(ah);
ecode = ath_hal_v14EepromAttach(ah);
if (ecode != HAL_OK)
goto bad;
@ -368,6 +375,26 @@ ar5416Detach(struct ath_hal *ah)
ath_hal_free(ah);
}
void
ar5416AttachPCIE(struct ath_hal *ah)
{
if (AH_PRIVATE(ah)->ah_ispcie)
ath_hal_configPCIE(ah, AH_FALSE);
else
ath_hal_disablePCIE(ah);
}
static void
ar5416ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore)
{
if (AH_PRIVATE(ah)->ah_ispcie && !restore) {
ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0);
OS_DELAY(1000);
OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
OS_REG_WRITE(ah, AR_WA, AR_WA_DEFAULT);
}
}
/*
* Fill all software cached or static hardware state information.
* Return failure if capabilities are to come from EEPROM and

13
sys/dev/ath/ath_hal/ar5416/ar5416reg.h
View File

@ -31,6 +31,8 @@
#define AR_GTTM 0x0068 /* global transmit timeout mode */
#define AR_CST 0x006C /* carrier sense timeout */
#define AR_MAC_LED 0x1f04 /* LED control */
#define AR_WA 0x4004 /* PCIE work-arounds */
#define AR_PCIE_PM_CTRL 0x4014
#define AR_AHB_MODE 0x4024 /* AHB mode for dma */
#define AR_INTR_SYNC_CAUSE_CLR 0x4028 /* clear interrupt */
#define AR_INTR_SYNC_CAUSE 0x4028 /* check pending interrupts */
@ -185,6 +187,17 @@
#define AR_MAC_LED_ASSOC_PEND 0x00000800 /* STA is trying to associate */
#define AR_MAC_LED_ASSOC_S 10
#define AR_WA_UNTIE_RESET_EN 0x00008000 /* ena PCI reset to POR */
#define AR_WA_RESET_EN 0x00040000 /* ena AR_WA_UNTIE_RESET_EN */
#define AR_WA_ANALOG_SHIFT 0x00100000
#define AR_WA_POR_SHORT 0x00200000 /* PCIE phy reset control */
#define AR_WA_DEFAULT 0x0000073f
#define AR9280_WA_DEFAULT 0x0040073f
#define AR9285_WA_DEFAULT 0x004a05cb
#define AR_PCIE_PM_CTRL_ENA 0x00080000
#define AR_AHB_EXACT_WR_EN 0x00000000 /* write exact bytes */
#define AR_AHB_BUF_WR_EN 0x00000001 /* buffer write upto cacheline*/
#define AR_AHB_EXACT_RD_EN 0x00000000 /* read exact bytes */

16
sys/dev/ath/ath_hal/ar5416/ar9160.ini
View File

@ -14,7 +14,7 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $Id: ar9160.ini,v 1.5 2008/11/10 04:08:05 sam Exp $
* $FreeBSD$
*/
/* Auto Generated PCI Register Writes. Created: 05/22/08 */
@ -697,3 +697,17 @@ static const uint32_t ar9160Addac_1_1[][2] = {
{0x0000989c, 0x00000000 },
{0x000098cc, 0x00000000 },
};
/* hand-crafted from code that does explicit register writes */
static const uint32_t ar9160PciePhy[][2] = {
{ AR_PCIE_SERDES, 0x9248fc00 },
{ AR_PCIE_SERDES, 0x24924924 },
{ AR_PCIE_SERDES, 0x28000039 },
{ AR_PCIE_SERDES, 0x53160824 },
{ AR_PCIE_SERDES, 0xe5980579 },
{ AR_PCIE_SERDES, 0x001defff },
{ AR_PCIE_SERDES, 0x1aaabe40 },
{ AR_PCIE_SERDES, 0xbe105554 },
{ AR_PCIE_SERDES, 0x000e3007 },
{ AR_PCIE_SERDES2, 0x00000000 },
};

5
sys/dev/ath/ath_hal/ar5416/ar9160_attach.c
View File

@ -148,7 +148,7 @@ ar9160Attach(uint16_t devid, HAL_SOFTC sc,
AH_PRIVATE(ah)->ah_macVersion =
(val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S;
AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION);
/* XXX extract pcie info */
AH_PRIVATE(ah)->ah_ispcie = (val & AR_XSREV_TYPE_HOST_MODE) == 0;
/* setup common ini data; rf backends handle remainder */
HAL_INI_INIT(&ahp->ah_ini_modes, ar9160Modes, 6);
@ -170,6 +170,9 @@ ar9160Attach(uint16_t devid, HAL_SOFTC sc,
if (ecode != HAL_OK)
goto bad;
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes, ar9160PciePhy, 2);
ar5416AttachPCIE(ah);
if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
ecode = HAL_EIO;