From dcfd4857b689de7541ec6176ea8bce2d0492d9f6 Mon Sep 17 00:00:00 2001 From: "Jordan K. Hubbard" Date: Fri, 18 Nov 1994 11:01:33 +0000 Subject: [PATCH] 1. Use dynamic sizing code throughout. 2. Add support for *dist menu to have an up-to-date idea of how big each distribution is going to be. --- release/bininst | 20 ++++++++++---------- release/instdist.sh | 28 ++++++++++++++++------------ release/miscfuncs.sh | 22 +++++++++++++++++++--- release/mkxf86extract.sh | 8 ++++---- release/netinst.sh | 8 ++++---- 5 files changed, 53 insertions(+), 33 deletions(-) diff --git a/release/bininst b/release/bininst index 55dbd13926e7..80bb569db212 100755 --- a/release/bininst +++ b/release/bininst @@ -13,7 +13,7 @@ # putting your name on top after doing something trivial like reindenting # it, just to make it look like you wrote it!). # -# $Id: bininst,v 1.40 1994/11/17 11:53:11 jkh Exp $ +# $Id: bininst,v 1.41 1994/11/18 10:05:29 jkh Exp $ if [ "$_BININST_LOADED_" = "yes" ]; then echo "Error, $0 loaded more than once!" @@ -41,7 +41,7 @@ trap interrupt 1 2 15 # set initial defaults set_defaults() { - set_media_defaults + media_set_defaults installing=1 mkdir -p ${TMP} cp /stand/etc/* /etc @@ -51,14 +51,14 @@ set_defaults() { welcome() { dialog --title "Welcome to FreeBSD!" $clear \ --msgbox \ -"We're now ready to install one or more packed distribution -sets onto your machine. Installation may be done from tape, -CD, network (NFS or ftp over ethernet, SLIP or parallel port), -a DOS partition or DOS floppies. If you're installing over -the network, make sure your cables are plugged in and ready to -go. If you're installing from tape, CD or floppies, now would -be a good time to remember where you put the distribution -media! :-) If you're set up and ready to go, please press return!" 16 72 +"We're now ready to install one or more packed distribution sets onto +your machine. Installation may be done from tape, CDROM, a network +(NFS or ftp over ethernet, SLIP or parallel port) or DOS (existing +hard disk partition or floppies). If you're installing over a network, +make sure your cables are plugged in and ready to go. If you're +installing from tape, CD or floppies, now would be a good time to +remember where you put the distribution media! :-) If you're set and +ready to go, please press return!" -1 -1 } do_last_config() diff --git a/release/instdist.sh b/release/instdist.sh index 1ec5eb92267e..aa02d37c0db0 100644 --- a/release/instdist.sh +++ b/release/instdist.sh @@ -10,7 +10,7 @@ # putting your name on top after doing something trivial like reindenting # it, just to make it look like you wrote it!). # -# $Id: instdist.sh,v 1.5 1994/11/17 16:18:35 jkh Exp $ +# $Id: instdist.sh,v 1.6 1994/11/18 10:05:44 jkh Exp $ if [ "$_INSTINST_SH_LOADED_" = "yes" ]; then return 0 @@ -104,7 +104,7 @@ to you or select \"other\" if you'd like to specify your own \n\ choice. Also note that not all sites carry the optional package or XFree86 3.1 distributions! These are only guaranteed to be available from the primary U.S. ftp site.\n\n" \ -"Please select one of the following:" 22 76 8 \ +"Please select one of the following:" -1 -1 8 \ "ftp://ftp.freebsd.org/pub/FreeBSD/${DISTNAME}" "Primary U.S. ftp site" \ "ftp://ftp.dataplex.net/pub/FreeBSD/${DISTNAME}" "United States" \ "ftp://kryten.atinc.com/pub/FreeBSD/${DISTNAME}" "United States" \ @@ -183,7 +183,7 @@ media_install_set() copying="yes" while [ "$copying" = "yes" ]; do if dialog --title "Insert distribution diskette" \ - $clear --yesno "Please enter the next diskette and press OK to continue or Cancel if finished" 5 72; then + $clear --yesno "Please enter the next diskette and press OK to continue or Cancel if finished" -1 -1; then if ! mount_msdos ${media_device} ${MNT}; then error "Unable to mount floppy! Please correct." else @@ -234,12 +234,16 @@ available, you may chose to load one or all of them. Optional \n\ and mandatory distributions are so noted. Please also note that \n\ the secrdist is NOT FOR EXPORT from the U.S.! Please don't \n\ endanger U.S. ftp sites by getting it illegally. Thank you!\n\n" \ -"Please select one (we'll come back to this menu later):" 20 76 6 \ +"Please select one of the following ${DISTNAME} distributions:" -1 -1 10 \ "?diskfree" "Uh, first, how much disk space do I have free?" \ - "bindist" "The ${DISTNAME} base distribution (mandatory - 80MB)" \ - "srcdist" "The ${DISTNAME} source distribution (optional - 120MB)" \ - "secrdist" "The ${DISTNAME} DES distribution (optional - 5MB)" \ - "compat1xdist" "The FreeBSD 1.x binary compatability dist (optional - 2MB)"\ + "bindist" "Binary base files (mandatory - $BINSIZE)" \ + "games" "Games and other frivolities (optional - $GAMESIZE)" \ + "manpages" "Manual pages (optional - $MANSIZE)" \ + "proflibs" "Profiled libraries (optional - $PROFSIZE)" \ + "dict" "Dictionary files for spelling checkers (optional - $DICTSIZE)" \ + "srcdist" "Full sources for everything but DES (optional - $SRCSIZE)" \ + "secrdist" "DES encryption code (and sources) (optional - $SECRSIZE)" \ + "compat1xdist" "FreeBSD 1.x binary compatability (optional - $COMPATSIZE)" \ "packages" "The ${DISTNAME} optional software distribution (user choice)" \ 2> ${TMP}/menu.tmp.$$ retval=$? @@ -285,7 +289,7 @@ one of the following options. If none of the listed options works \n\ for you then your best bet may be to simply hit ESC twice to get \n\ a subshell and proceed manually on your own. If you are already \n\ finished with installation, select cancel to go on.\n\n\ - Please choose one of the following:" 20 72 7 \ + Please choose one of the following:" -1 -1 7 \ "?Kern" "Please show me the kernel boot messages again!" \ "Tape" "Load distribution from SCSI, QIC or floppy tape" \ "CDROM" "Load distribution from SCSI or Mitsumi CDROM" \ @@ -313,7 +317,7 @@ finished with installation, select cancel to go on.\n\n\ dialog $clear --title "Chose Tape Type" \ --menu "Which type of tape drive do you have attached to your \n\ system? FreeBSD supports the following types:\n\n\ - Choose one of the following:" 20 72 3 \ + Choose one of the following:" -1 -1 3 \ "SCSI" "SCSI tape drive attached to supported SCSI controller" \ "QIC" "QIC tape drive (Colorado Jumbo, etc)" \ "floppy" "Floppy tape drive" \ @@ -340,7 +344,7 @@ system? FreeBSD supports the following types:\n\n\ dialog $clear --title "Chose CDROM Type" \ --menu "Which type of CDROM drive do you have attached to your \n\ system? FreeBSD supports the following types:\n\n\ - Choose one of the following:" 15 72 2 \ + Choose one of the following:" -1 -1 2 \ "SCSI" "SCSI CDROM drive attached to supported SCSI controller" \ "Mitsumi" "Mitsumi CDROM drive" \ 2> ${TMP}/menu.tmp.$$ @@ -433,7 +437,7 @@ Options, if any, should be separated by commas."; then dialog $clear --title "User Intervention Requested" --msgbox " Please mount the filesystem you wish to use somewhere convenient and exit the shell when you're through. I'll ask you for the location -of the distribution when we come back." 12 72 +of the distribution when we come back." -1 -1 dialog --clear /stand/sh title="Please enter directory" diff --git a/release/miscfuncs.sh b/release/miscfuncs.sh index ab1e2228eab8..0a8e700590a0 100644 --- a/release/miscfuncs.sh +++ b/release/miscfuncs.sh @@ -10,7 +10,7 @@ # putting your name on top after doing something trivial like reindenting # it, just to make it look like you wrote it!). # -# $Id: miscfuncs.sh,v 1.1 1994/11/16 07:51:43 jkh Exp $ +# $Id: miscfuncs.sh,v 1.2 1994/11/17 11:53:14 jkh Exp $ if [ "$_MISCFUNCS_SH_LOADED_" = "yes" ]; then return 0 @@ -20,8 +20,24 @@ fi PATH=/usr/bin:/usr/sbin:/bin:/sbin:/stand export PATH + +# Keep this current with the distribution! DISTNAME=2.0-ALPHA +# Flagrant guesses for now. These need to be hand-edited or, much better yet, +# automatically done as part of the release process. When that's the case, +# the hardwired constants will be replaced with tokens that get sed'd for +# the real sizes. +# +BINSIZE="60MB" +GAMESIZE="8MB" +MANSIZE="8MB" +PROFSIZE="4MB" +DICTSIZE="2MB" +SRCSIZE="120MB" +SECRSIZE="4MB" +COMPATSIZE="3MB" + interrupt() { if dialog --clear --title "User Interrupt Requested" \ --yesno "Do you wish to abort the installation?" -1 -1; then @@ -52,7 +68,7 @@ confirm() { # A simple message box dialog. message() { - dialog --title "Progress" --infobox "$*" 5 72 + dialog --title "Progress" --infobox "$*" -1 -1 } # A simple error dialog. @@ -65,7 +81,7 @@ not_supported() { dialog --title "Sorry!" \ --msgbox "This feature is not supported in the current version of the \ installation tools. Barring some sort of fatal accident, we do \ -expect it to be in the release. Please press RETURN to go on." 10 60 +expect it to be in the release. Please press RETURN to go on." -1 -1 } # Get a string from the user diff --git a/release/mkxf86extract.sh b/release/mkxf86extract.sh index 2798f34afd88..5cdcd7b65d73 100644 --- a/release/mkxf86extract.sh +++ b/release/mkxf86extract.sh @@ -18,7 +18,7 @@ cat > extract.sh << DO_THE_FUNKY_CHICKEN # Don't edit me - I'm auto-generated by mkextract.sh! # if [ ! -f /usr/bin/tar ]; then - dialog --title "Error!" --msgbox "You must install the bindist before this distribution!" 6 72 + dialog --title "Error!" --msgbox "You must install the bindist before this distribution!" -1 -1 exit 0 fi @@ -36,13 +36,13 @@ Comments on the XFree86 distribution to David Dawes Comments on this install to Jordan Hubbard -Thanks!" 18 72 +Thanks!" -1 -1 dialog --title "Read This First" --textbox README.FreeBSD 22 76 DO_THE_FUNKY_CHICKEN for i in $TARGETS; do abbrevname=`echo $i | sed -e 's/XFree86-3.1-//' -e 's/.tar.gz//'` - echo "if dialog --title \"Install Request\" --yesno \"Do you wish to install the ${abbrevname} distribution?\" 6 72; then dialog --title \"Progress\" --infobox \"Installing $i\" 6 72; tar --unlink -xzf $i -C /usr; fi" >> extract.sh + echo "if dialog --title \"Install Request\" --yesno \"Do you wish to install the ${abbrevname} distribution?\" -1 -1; then dialog --title \"Progress\" --infobox \"Installing $i\" -1 -1; tar --unlink -xzf $i -C /usr; fi" >> extract.sh done cat >> extract.sh << OH_YEAH_BABY_GET_DOWN @@ -53,7 +53,7 @@ Now would probably be a very good time to look in ${BASEDIR}/lib/X11/doc for further information on what to do next. XFree86 3.1 is now installed in the ${BASEDIR} directory, unlike earlier releases. For backwards compatibility, you might consider -a symlink to /usr/X386." 10 76 +a symlink to /usr/X386." -1 -1 OH_YEAH_BABY_GET_DOWN chmod 755 extract.sh diff --git a/release/netinst.sh b/release/netinst.sh index e180d12cc125..77e84b1fbed5 100644 --- a/release/netinst.sh +++ b/release/netinst.sh @@ -10,7 +10,7 @@ # putting your name on top after doing something trivial like reindenting # it, just to make it look like you wrote it!). # -# $Id: netinst.sh,v 1.3 1994/11/18 10:05:47 jkh Exp $ +# $Id: netinst.sh,v 1.4 1994/11/18 10:19:04 jkh Exp $ if [ "$_NETINST_SH_LOADED_" = "yes" ]; then return 0 @@ -30,7 +30,7 @@ network_setup_ether() { dialog $clear --title "Ethernet Interface Name" \ --menu "Please select the type of ethernet interface you have:\n\n" \ - 20 76 7 \ + -1 -1 7 \ "ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280" \ "ed1" "Same as above, but at address 0x300 and IRQ 5" \ "ep0" "3COM 3C509 at address 0x300 and IRQ 10" \ @@ -89,10 +89,10 @@ network_setup() clear="--clear" dialog $clear --title "Set up network interface" \ --menu "Please select the type of network connection you have:\n\n" \ - 15 72 3 \ + -1 -1 3 \ "ether" "A supported ethernet card" \ "SLIP" "A point-to-point SLIP (Serial Line IP) connection" \ - "PLIP" "A Parallel-Line IP setup (sort of like lap-link)" \ + "PLIP" "A Parallel-Line IP setup (with standard laplink cable)" \ 2> ${TMP}/menu.tmp.$$ retval=$?