d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Until there's a full MCI implementation - just implement a placeholder

Browse Source 
MCI bluetooth coexistence method for WB222.

The rest of MCI requires a bunch more work, including adding a DMA buffer
for the MCI hardware to bounce messages in/out of and handling MCI
interrupts.  But the more important part here is telling the HAL
the btcoex is enabled and MCI is in use so it configures the correct
initial bluetooth parameters in the wireless NIC and configures
things like bluetooth traffic weights and such.

So, this at least gets the HAL to do some of the right things in
configuring the inital bluetooth coexistence stuff, but doesn't
actually do full btcoex.  That'll take.. some effort.

Tested:

* AR9462 (WB222), STA mode
This commit is contained in:
Adrian Chadd 2015-01-17 00:02:18 +00:00
parent 38878c6343
commit e21928d3c3
1 changed files with 68 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

68
sys/dev/ath/if_ath_btcoex.c
View File

@ -188,6 +188,72 @@ ath_btcoex_cfg_wb225(struct ath_softc *sc)
return (0);
}
/*
* Initial AR9462 / (WB222) bluetooth coexistence settings,
* just for experimentation.
*
* Return 0 for OK; errno for error.
*/
static int
ath_btcoex_cfg_wb222(struct ath_softc *sc)
{
HAL_BT_COEX_INFO btinfo;
HAL_BT_COEX_CONFIG btconfig;
struct ath_hal *ah = sc->sc_ah;
if (! ath_hal_btcoex_supported(ah))
return (EINVAL);
bzero(&btinfo, sizeof(btinfo));
bzero(&btconfig, sizeof(btconfig));
device_printf(sc->sc_dev, "Enabling WB222 BTCOEX\n");
btinfo.bt_module = HAL_BT_MODULE_JANUS; /* XXX not used? */
btinfo.bt_coex_config = HAL_BT_COEX_CFG_MCI;
/*
* MCI uses a completely different interface to speak
* to the bluetooth module - it's a command based
* thing over a serial line, rather than
* state pins to/from the bluetooth module.
*
* So, the GPIO configuration, polarity, etc
* doesn't matter on MCI devices; it's just
* completely ignored by the HAL.
*/
btinfo.bt_gpio_bt_active = 4;
btinfo.bt_gpio_bt_priority = 8;
btinfo.bt_gpio_wlan_active = 5;
btinfo.bt_active_polarity = 1; /* XXX not used */
btinfo.bt_single_ant = 0; /* 2 antenna on WB222 */
btinfo.bt_isolation = 0; /* in dB, not used */
ath_hal_btcoex_set_info(ah, &btinfo);
btconfig.bt_time_extend = 0;
btconfig.bt_txstate_extend = 1; /* true */
btconfig.bt_txframe_extend = 1; /* true */
btconfig.bt_mode = HAL_BT_COEX_MODE_SLOTTED;
btconfig.bt_quiet_collision = 1; /* true */
btconfig.bt_rxclear_polarity = 1; /* true */
btconfig.bt_priority_time = 2;
btconfig.bt_first_slot_time = 5;
btconfig.bt_hold_rxclear = 1; /* true */
ath_hal_btcoex_set_config(ah, &btconfig);
/*
* Enable antenna diversity.
*/
ath_hal_btcoex_set_parameter(ah, HAL_BT_COEX_ANTENNA_DIVERSITY, 1);
return (0);
}
#if 0
/*
@ -243,6 +309,8 @@ ath_btcoex_attach(struct ath_softc *sc)
if (strncmp(profname, "wb195", 5) == 0) {
ret = ath_btcoex_cfg_wb195(sc);
} else if (strncmp(profname, "wb222", 5) == 0) {
ret = ath_btcoex_cfg_wb222(sc);
} else if (strncmp(profname, "wb225", 5) == 0) {
ret = ath_btcoex_cfg_wb225(sc);
} else {