d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Populate the GPIO pins and GPIOLED configs

Browse Source
This commit is contained in:
Sean Bruno 2014-03-05 04:22:07 +00:00
parent 2cf9b4fc66
commit e46fb7ab21
1 changed files with 72 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
sys/mips/conf/DIR-825B1.hints
View File

@ -28,14 +28,13 @@ hint.pcib.0.bus.0.18.0.ath_fixup_size=4096
hint.ath.0.eeprom_firmware="pcib.0.bus.0.17.0.eeprom_firmware"
hint.ath.1.eeprom_firmware="pcib.0.bus.0.18.0.eeprom_firmware"
# TODO: gpio LEDs
# Geom MAP
# The DIR-825B1 has an 8MB flash part - HOWEVER, the 64k caldata isn't
# at the end of the flash. It's ~ 6MB into the flash image.
# mtdparts=ar7100-nor0:256k(uboot),64k(Config),1024k(vmlinux),5184k(rootfs),64k(caldata)
# mtdparts=ar7100-nor0:256k(uboot),64k(Config),1024k(vmlinux),5184k(rootfs),
# 64k(caldata)
hint.map.0.at="flash/spi0"
hint.map.0.start=0x00000000
@ -69,3 +68,73 @@ hint.map.4.end=0x00670000
hint.map.4.name="art"
hint.map.4.readonly=1
# GPIO specific configuration block
# Don't flip on anything that isn't already enabled.
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
# not used here.
hint.gpio.0.function_set=0x00000000
hint.gpio.0.function_clear=0x00000000
# These are the GPIO LEDs and buttons which can be software controlled.
hint.gpio.0.pinmask=0x000009ff
# Pin 1 - USB (LED blue) --> works
# Pin 2 - Power (LED orange) --> works
# Pin 3 - Power (LED blue) --> works
# Pin 4 - Button (RESET) --> works
# Pin 5 - WPS (LED blue) --> works
# Pin 6 - RTL8366RB switch data line
# Pin 7 - Planet (LED orange)--> works
# Pin 8 - RTL8366RB switch clock line
# Pin 9 - Button (WPS) --> works after set to high
# Pin 10 - N/C
# Pin 11 - N/C
# Pin 12 - Planet (LED blue) --> works
# LEDs are configured separately and driven by the LED device
# usb tested good
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="usb-blue"
hint.gpioled.0.pins=0x0001
# no orange power led?
hint.gpioled.1.at="gpiobus0"
hint.gpioled.1.name="power-orange"
hint.gpioled.1.pins=0x0002
# blue power tested good
hint.gpioled.2.at="gpiobus0"
hint.gpioled.2.name="power-blue"
hint.gpioled.2.pins=0x0004
# wps tested good
hint.gpioled.3.at="gpiobus0"
hint.gpioled.3.name="wps-blue"
hint.gpioled.3.pins=0x0010
# orage globe tested good
hint.gpioled.4.at="gpiobus0"
hint.gpioled.4.name="planet-orange"
hint.gpioled.4.pins=0x0040
# no blue planet LED on this unit
hint.gpioled.5.at="gpiobus0"
hint.gpioled.5.name="planet-blue"
hint.gpioled.5.pins=0x0800
# GPIO I2C bus
hint.gpioiic.0.at="gpiobus0"
hint.gpioiic.0.pins=0x00a0
hint.gpioiic.0.sda=0
hint.gpioiic.0.scl=1
# I2C bus
# Don't be strict about I2C protocol - the relaxed semantics are required
# by the realtek switch PHY.
hint.iicbus.0.strict=0
# Bit bang bus - override default delay
#hint.iicbb.0.udelay=3