xntpd 3.3b from UDel
This commit is contained in:
wollman
commit
ea7ac98755
200
usr.sbin/xntpd/Config
Normal file
200
usr.sbin/xntpd/Config
Normal file
@ -0,0 +1,200 @@
|
||||
RANLIB= ranlib
|
||||
DEFS_LOCAL=-DREFCLOCK
|
||||
DEFS= -DSYS_FREEBSD -DSYS_386BSD
|
||||
AUTHDEFS= -DDES -DMD5
|
||||
CLOCKDEFS= -DLOCAL_CLOCK
|
||||
DAEMONLIBS= -lcrypt
|
||||
RESLIB=
|
||||
COPTS= -O2
|
||||
COMPILER= gcc
|
||||
LIBDEFS= -DXNTP_LITTLE_ENDIAN
|
||||
# This is the local configure file (distribution version).
|
||||
# You must modify it to fit your particular configuration
|
||||
# and name it Config.local
|
||||
# The following configuratiions can be auto-generated:
|
||||
#
|
||||
# make Config.local.green
|
||||
# make a Config.local that supports a local clock
|
||||
# (i.e. allow fallback to use of the CPU's own clock)
|
||||
# make Config.local.NO.clock
|
||||
# make a Config.local that supports no clocks
|
||||
#
|
||||
#
|
||||
# NOTE TO GREENHORNS
|
||||
#
|
||||
# For plug-'n-play and no radios or other complicated gadgetry,
|
||||
# use "make Config.local.green" as above.
|
||||
#
|
||||
# Following defines can be set in the DEFS_OPT= define:
|
||||
#
|
||||
# The flag -DDEBUG includes some debugging code. To use this, include
|
||||
# the define and start the daemon with one or more -d flags, depending
|
||||
# on your calibration of pearannoya. The daemon will not detach your
|
||||
# terminal in this case. Judicious use of grep will reduce the speaker
|
||||
# volume to bearable levels.
|
||||
#
|
||||
# To change the location of the configuration file, use a
|
||||
# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
|
||||
#
|
||||
# The -DSYSLOG_FILE defines allows logging messages that are normally
|
||||
# reported via syslof() in a file. The file name can be configured using
|
||||
# the configuration line "logfile <filename>" in CONFIG_FILE.
|
||||
#
|
||||
# There are three serial port system software interfaces, each of
|
||||
# which is peculiar to one or more Unix versions. Define
|
||||
# -DHAVE_SYSV_TTYS for basic System V compatibility; define -DSTREAM
|
||||
# for POSIX compatibility including System V Streams, and
|
||||
# HAVE_BSD_TTYS for 4.3bsd compatibility. Only one of these three
|
||||
# should be defined. If none are defined, HAVE_BSD_TTYS is assumed.
|
||||
# Usually these defines are already set correctly.
|
||||
#
|
||||
DEFS_OPT=-DDEBUG
|
||||
|
||||
#
|
||||
# The DEFS_LOCAL define picks up all flags from DEFS_OPT (do not delete that)
|
||||
# and one of the following:
|
||||
#
|
||||
# The flag -DREFCLOCK causes the basic reference clock support to be
|
||||
# compiled into the daemon. If you set this you may also want to
|
||||
# configure the particular clock drivers you want in the CLOCKDEFS= line
|
||||
# below. This flag affects xntpd only. This define is included by
|
||||
# default when using the "make makeconfig" script.
|
||||
#
|
||||
# The next two sets of defines are meaningful only when radio clock
|
||||
# drivers or special 1-pps signals are to be used. For systems without
|
||||
# these features, these delicious complexities can be avoided. Ordinarily,
|
||||
# the "make makeconfig" script figures out which ones to use, but your
|
||||
# mileage may vary.
|
||||
#
|
||||
# There are three ways to utilize external 1-pps signals. Define
|
||||
# -DPPS to include just the pps routine, such as used by the DCF77(PARSE)
|
||||
# clock driver. Define -DPPSCLK to include a serial device driver
|
||||
# which avoids much of the jitter due to upper level port
|
||||
# processing. This requires a dedicated serial port and either the
|
||||
# tty_clock line discipline or tty_clk_streams module, both of
|
||||
# which are in the ./kernel directory. Define -DPPSCD to include a
|
||||
# special driver which intercepts carrier-detect transitions
|
||||
# generated by the pps signal. This requires a nondedicated serial
|
||||
# port and the ppsclock streams module in the ./kernel directory.
|
||||
# Only one of these three flags should be defined.
|
||||
#
|
||||
# The flag KERNEL_PLL causes code to be compiled for a special feature of
|
||||
# the kernel that (a) implements the phase-lock loop and (b) provides
|
||||
# a user interface to learn time, maximum error and estimated error.
|
||||
# See the file README.kern in the doc directory for further info.
|
||||
# This code is activated only if the relevant kernel features have
|
||||
# been configured; it does not affect operation of unmodified kernels.
|
||||
# To compile it, however, requires a few header files from the
|
||||
# special distribution.
|
||||
#
|
||||
# Note: following line must always start with DEFS_LOCAL= $(DEFS_OPT)
|
||||
DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DPPSPPS -DKERNEL_PLL
|
||||
|
||||
#
|
||||
# Radio clock support definitions (these only make sense if -DREFCLOCK
|
||||
# used), which is normally the case. Note that a configuration can include
|
||||
# no clocks, more than one type of clock and even multiple clocks of the
|
||||
# same type.
|
||||
#
|
||||
# For most radio clocks operating with serial ports, accuracy can
|
||||
# be considerably improved through use of the tty_clk line
|
||||
# discipline or tty_clk_STREAMS streams module found in the
|
||||
# ./kernel directory. These gizmos capture a timestamp upon
|
||||
# occurrence of an intercept character and stuff it in the data
|
||||
# stream for the clock driver to munch. To select this mode,
|
||||
# postfix the driver name with the string CLK; that is, WWVB
|
||||
# becomes WWVBCLK. If more than one clock is in use, the CLK
|
||||
# postfix can be used with any or all of them.
|
||||
#
|
||||
# Alternatively, for the best accuracy, use the ppsclock streams
|
||||
# module in the ./ppsclock directory to steal the carrier-detect
|
||||
# transition and capture a precision timestamp. At present this
|
||||
# works only with SunOS 4.1.1 or later. To select this mode,
|
||||
# postfix the driver name with the string PPS; that is, AS2201
|
||||
# becomes AS2201PPS. If more than one clock is in use, the PPS
|
||||
# postfix should be used with only one of them. If any PPS
|
||||
# postfix is defined, the -DPPSPPS define should be used on the
|
||||
# DEFS above.
|
||||
#
|
||||
# Define -DLOCAL_CLOCK for a local pseudo-clock to masquerade as a
|
||||
# reference clock for those subnets without access to the real thing.
|
||||
# Works in all systems and requires no hardware support. This is defined
|
||||
# by default when using the "make makeconfig" script and greenhorn
|
||||
# configuraiton.
|
||||
#
|
||||
# Define -DPST for a PST/Traconex 1020 WWV/H receiver. The driver
|
||||
# supports both the CLK and PPS modes. It should work in all systems
|
||||
# with a serial port.
|
||||
#
|
||||
# Define -DWWVB for a Spectracom 8170 or Netclock/2 WWVB receiver. It
|
||||
# should work in all systems with a serial port. The driver supports
|
||||
# both the CLK and PPS modes if the requisite kernel support is installed.
|
||||
#
|
||||
# Define -DCHU for a special CHU receiver using an ordinary shortwave
|
||||
# radio. This requires the chu_clk line discipline or chu_clk_STREAMS
|
||||
# module in the ./kernel directory. At present, this driver works only
|
||||
# on SunOS4.1.x; operation in other systems has not been confirmed.
|
||||
# Construction details for a suitable modem can be found in the ./gadget
|
||||
# directory. The driver supports # neither the CLK nor PPS modes.
|
||||
#
|
||||
# Define -DPARSE for a DCF77/GPS(GENERIC) receiver. For best performance
|
||||
# this requires a special parsestreams STREAMS (SunOS 4.x) module in the
|
||||
# ./parse directory. Define -DPARSEPPS for PPS support via the
|
||||
# DCF77/GPS (GENERIC) receiver; also, define -DPPS in the DEFS above.
|
||||
# Define: -DCLOCK_MEINBERG for Meinberg clocks
|
||||
# -DCLOCK_SCHMID for Schmid receivers
|
||||
# -DCLOCK_DCF7000 for ELV DCF7000
|
||||
# -DCLOCK_RAWDCF for simple receivers (100/200ms pulses on Rx)
|
||||
# -DCLOCK_TRIMSV6 for Trimble SV6 GPS receiver
|
||||
#
|
||||
# Define -DMX4200PPS for a Magnavox 4200 GPS receiver. At present, this
|
||||
# driver works only on SunOS4.1.x with CPU serial ports only. The PPS
|
||||
# mode is required.
|
||||
#
|
||||
# Define -DAS2201 for an Austron 2200A or 2201A GPS receiver. It should
|
||||
# work in all systems with a serial port. The driver does not support the
|
||||
# CLK mode, but does support the PPS mode. If the radio is connected to
|
||||
# more than one machine, the PPS mode is required.
|
||||
#
|
||||
# Define -DGOES for a Kinemetrics/TrueTime 468-DC GOES receiver. This
|
||||
# driver is known to work with some other TrueTime products as well,
|
||||
# including the GPS-DC GPS receiver. It should work in all systems with
|
||||
# a serial port. The driver does not support the CLK mode, but does
|
||||
# support the PPS mode.
|
||||
#
|
||||
# Define -DOMEGA for a Kinemetrics/TrueTime OM-DC OMEGA receiver. It
|
||||
# should work in all systems with a serial port. The driver does not
|
||||
# support the CLK mode, but does support the PPS mode.
|
||||
#
|
||||
# Define -DTPRO for a KSI/Odetics TPRO-S IRIG-B timecode reader. This
|
||||
# requires the SunOS interface driver available from KSI. The driver
|
||||
# supports neither the CLK nor PPS modes.
|
||||
#
|
||||
# Define -DLEITCH for a Leitch CSD 5300 Master Clock System Driver for
|
||||
# the HP 5061B Cesium Clock. It should work in all systems with a serial
|
||||
# port. The driver does not support the CLK mode, but does support the
|
||||
# PPS mode.
|
||||
#
|
||||
# Define -DMSFEESPPS for an EES M201 MSF receiver. It currently only works
|
||||
# under SunOS 4.x with the PPSCD (ppsclock) STREAMS module, but the RCS
|
||||
# files on cl.cam.ac.uk still has support for CLK and CBREAK modes.
|
||||
#
|
||||
# Define -DIRIG for a IRIG-B timecode timecode using the audio codec of
|
||||
# the Sun SPARCstations. This requires a modified BSD audio driver and
|
||||
# exclusive access to the audio port. A memo describing how it works and
|
||||
# how to install the driver is in the README.irig file in the ./doc
|
||||
# directory.
|
||||
#
|
||||
# Note: The following defines result in compilation of all the above radio
|
||||
# clocks. This works on a Sun 4.1.x system which has tty_clk, chu_clk and
|
||||
# ppsclock STREAMS modules installed. If the trailing CLK and PPS suffixes
|
||||
# are removed and the IRIG, PARSE* and CLOCK* deleted, all of the rest compile
|
||||
# under Ultrix 4.2a/3. If the MX4200 is removed, all the rest compile on a DEC
|
||||
# OSF/1 Alpha.
|
||||
#
|
||||
CLOCKDEFS= -DLOCAL_CLOCK -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -DMSFEESPPS -DLEITCH
|
||||
|
||||
#
|
||||
# Directory into which binaries should be installed (default /usr/local)
|
||||
#
|
||||
BINDIR= /usr/local/bin
|
||||
14
usr.sbin/xntpd/Config.sed
Normal file
14
usr.sbin/xntpd/Config.sed
Normal file
@ -0,0 +1,14 @@
|
||||
s~^RANLIB=.*~RANLIB= ranlib~
|
||||
s~^DEFS_LOCAL=.*~DEFS_LOCAL=-DREFCLOCK~
|
||||
s~^DEFS=.*~DEFS= -DSYS_FREEBSD -DSYS_386BSD~
|
||||
s~^AUTHDEFS=.*~AUTHDEFS= -DDES -DMD5~
|
||||
s~^CLOCKDEFS=.*~CLOCKDEFS= -DLOCAL_CLOCK~
|
||||
s~^DAEMONLIBS=.*~DAEMONLIBS= -lcrypt~
|
||||
s~^RESLIB=.*~RESLIB=~
|
||||
s~^COPTS=.*~COPTS= -O2~
|
||||
s~^COMPILER=.*~COMPILER= gcc~
|
||||
s~^LIBDEFS=.*~LIBDEFS= -DXNTP_LITTLE_ENDIAN~
|
||||
s~^DEFS_OPT=.*~DEFS_OPT=-DDEBUG~
|
||||
s~^DEFS_LOCAL=.*~DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DPPSPPS -DKERNEL_PLL~
|
||||
s~^CLOCKDEFS=.*~CLOCKDEFS= -DLOCAL_CLOCK -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -DMSFEESPPS -DLEITCH~
|
||||
s~^BINDIR=.*~BINDIR= /usr/local/bin~
|
||||
1
usr.sbin/xntpd/compilers/hpux10+.cc
Normal file
1
usr.sbin/xntpd/compilers/hpux10+.cc
Normal file
@ -0,0 +1 @@
|
||||
COMPILER=cc +O1
|
||||
8
usr.sbin/xntpd/machines/hpux10+
Normal file
8
usr.sbin/xntpd/machines/hpux10+
Normal file
@ -0,0 +1,8 @@
|
||||
SHELL= /bin/sh
|
||||
RANLIB= ls # ar does the work of ranlib under System V
|
||||
DEFS_LOCAL= -DREFCLOCK
|
||||
DEFS= -DHAVE_SYSV_TTYS -DSYS_HPUX=10
|
||||
AUTHDEFS= -DDES -DMD5
|
||||
CLOCKDEFS= -DLOCAL_CLOCK
|
||||
COPTS=
|
||||
INSTALL=$(TOP)scripts/install.sh
|
||||
49
usr.sbin/xntpd/parse/util/Makefile
Normal file
49
usr.sbin/xntpd/parse/util/Makefile
Normal file
@ -0,0 +1,49 @@
|
||||
#
|
||||
# /src/NTP/REPOSITORY/v3/parse/util/Makefile.tmpl,v 3.11 1993/11/17 13:34:12 kardel Exp
|
||||
#
|
||||
COMPILER= gcc
|
||||
DEFS= -DSYS_FREEBSD -DSYS_386BSD
|
||||
DEFS_OPT=-DDEBUG
|
||||
DEFS_LOCAL= $(DEFS_OPT) -DREFCLOCK -DPPSPPS -DKERNEL_PLL
|
||||
CLOCKDEFS= -DLOCAL_CLOCK -DAS2201PPS -DCHU -DGOES -DIRIG -DMX4200PPS -DOMEGA -DPSTCLK -DTPRO -DWWVBCLK -DMSFEESPPS -DLEITCH
|
||||
INCL=
|
||||
COPTS= -O2
|
||||
INSTALL= install
|
||||
BINDIR= /usr/local/bin
|
||||
#
|
||||
CFLAGS= $(COPTS) $(DEFS) $(DEFS_LOCAL) $(INCL) -I../../include
|
||||
CC= $(COMPILER)
|
||||
TOP=../../
|
||||
#
|
||||
EXECS=parsetest testdcf dcfd
|
||||
|
||||
all:
|
||||
@echo $(DEFS) $(DEFS_LOCAL) $(CLOCKDEFS) | \
|
||||
awk '/-DSTREAM/ && /-DPARSE/ && /-DCLOCK_RAWDCF/ && ( /-DSYS_SUNOS/ || /-DSYS_SOLARIS/ ) { makeit = 1 } \
|
||||
END { if (makeit) \
|
||||
{ print "$(MAKE) $(MFLAGS) MFLAGS=\"$(MFLAGS)\" parsetest"; } \
|
||||
}' | \
|
||||
sh
|
||||
@echo $(DEFS) $(DEFS_LOCAL) $(CLOCKDEFS) | \
|
||||
awk '/-DPARSE/ && /-DCLOCK_RAWDCF/ && ( /-DSYS_SUNOS/ || /-DSYS_SOLARIS/ ) { makeit = 1 } \
|
||||
END { if (makeit) \
|
||||
{ print "$(MAKE) $(MFLAGS) MFLAGS=\"$(MFLAGS)\" testdcf"; } \
|
||||
}' | \
|
||||
sh
|
||||
@echo $(DEFS) $(DEFS_LOCAL) $(CLOCKDEFS) | \
|
||||
awk '/-DPARSE/ && /-DCLOCK_RAWDCF/ && ( /-DSYS_SUNOS/ || /-DSYS_SOLARIS/ ) { makeit = 1 } \
|
||||
END { if (makeit) \
|
||||
{ print "$(MAKE) $(MFLAGS) MFLAGS=\"$(MFLAGS)\" dcfd"; } \
|
||||
}' | \
|
||||
sh
|
||||
|
||||
clean:
|
||||
-@rm -f $(EXECS) *.o
|
||||
|
||||
distclean: clean
|
||||
-@rm -f *.orig *.rej .version Makefile
|
||||
|
||||
install:
|
||||
@echo "--- DCF77 utilities should be installed manually"
|
||||
@#[ -f testdcf ] && $(INSTALL) -c -m 0755 testdcf $(BINDIR) || true
|
||||
@#[ -f dcfd ] && $(INSTALL) -c -m 0755 dcfd $(BINDIR) || true
|
||||
Loading…
x
Reference in New Issue
Block a user