Fix PCI ID of the AMD-8111 System Management controller so it matches

SMBus 1.0 and not SMBus 2.0.

AMD-8111 hub (datasheet is publically available) implements both SMBus
2.0 (a separate PCI device) and SMBus 1.0 (a subfunction of the System
Management Controller device with the base I/O address is accessible
through the CSR 0x58).  This driver only supports AMD-756 SMBus 1.0
compatible devices.

With the patched sysutils/xmbmon port (to also fix PCI ID and to enable
smb(4) support), I now get:

pciconf:
none0@pci0:7:2: class=0x0c0500 card=0x746a1022 chip=0x746a1022 rev=0x02 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8111 SMBus 2.0 Controller'
    class    = serial bus
    subclass = SMBus
amdpm0@pci0:7:3:        class=0x068000 card=0x746b1022 chip=0x746b1022 rev=0x05 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8111 ACPI System Management Controller'
    class    = bridge

dmesg:
amdpm0: <AMD 756/766/768/8111 Power Management Controller> port 0x10e0-0x10ff at device 7.3 on pci0
smbus0: <System Management Bus> on amdpm0

# mbmon -A -d
Summary of Detection:
 * SMB monitor(s)[ioctl:AMD8111]:
  ** Winbond Chip W83627HF/THF/THF-A found at slave address: 0x50.
  ** Analog Dev. Chip ADM1027 found at slave address: 0x5C.
 * ISA monitor(s):
  ** Winbond Chip W83627HF/THF/THF-A found.

I think the confusion comes from the fact that nobody really tried
SMBus with xmbmon :-), since sysutils/xmbmon port doesn't come with
SMBus support enabled, neither in FreeBSD 4, nor in later versions,
so mbmon(1) was just showing the values from the Winbond sensors
accessible through the ISA I/O method (mbmon -I), for me anyway.

On my test machine, the amdpm(4) didn't even attach due to I/O port
allocation failure (who knows what the hell it read from CSR 0x58
of the SMBus 2.0 device :-), which isn't in the CSR space).

I've also checked that lm_sensors.org uses correct PCI ID for SMBus
1.0 of AMD-8111:

i2c-amd756.c:   {PCI_VENDOR_ID_AMD, 0x746B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111 },

This driver is analogous to our amdpm.c which supports SMBus 1.0
AMD-756 and compatible devices, including SMBus 1.0 on AMD-8111.

i2c-amd8111.c:  { 0x1022, 0x746a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },

This driver is analogous to nForce-2/3/4, i2c-nforce2.c, which
supports SMBus 2.0, and which our amdpm.c does NOT support
(SMBus 2.0 uses a different, ACPI-unified, API to talk to SMBus).
At least I know for sure it doesn't work with my nForce3.  :-)

(The xmbmon port will be fixed to correct the PCI ID too and to
enable the smb(4) support.)

sys/pci/amdpm.c

@@ -66,7 +66,7 @@ static int amdpm_debug = 0;
 #define AMDPM_DEVICEID_AMD756PM 0x740b
 #define AMDPM_DEVICEID_AMD766PM 0x7413
 #define AMDPM_DEVICEID_AMD768PM 0x7443
-#define AMDPM_DEVICEID_AMD8111PM 0x746A
+#define AMDPM_DEVICEID_AMD8111PM 0x746B
 
 /* nVidia nForce chipset */
 #define AMDPM_VENDORID_NVIDIA 0x10de