Fix typos and spelling mistakes.

lib/libc/net/sctp_recvmsg.3

@@ -88,7 +88,7 @@ will hold the address of the peer and
 .Fa fromlen
 will hold the length of that address.
 Note that
-the address is bounded by the inital value of 
+the address is bounded by the initial value of 
 .Fa fromlen
 which is used as an in/out variable.
 .Pp

lib/libc/net/sctp_sendmsg.3

@@ -72,7 +72,7 @@ Data sent in such an instance will result in
 the data being sent on the third leg of the SCTP four-way handshake.
 Note that if
 the socket is a one-to-one type (SOCK_STREAM) socket then an association must
-be in existance (by use of the 
+be in existence (by use of the 
 .Xr connect 2
 system call).
 Calling 

lib/libc/stdlib/malloc.3

@@ -415,7 +415,7 @@ Allocation requests that are more than half the quantum, but no more than the
 minimum cacheline-multiple size class (see the
 .Dq Q
 option) are rounded up to the nearest multiple of the quantum.
-Allocation requests that are more than the minumum cacheline-multiple size
+Allocation requests that are more than the minimum cacheline-multiple size
 class, but no more than the minimum subpage-multiple size class (see the
 .Dq C
 option) are rounded up to the nearest multiple of the cacheline size (64).

lib/libc/sys/kqueue.2

@@ -445,7 +445,7 @@ contains the events which triggered the filter.
 .It Dv EVFILT_USER
 Establishes a user event identified by
 .Va ident
-which is not assosicated with any kernel mechanism but is triggered by
+which is not associated with any kernel mechanism but is triggered by
 user level code.
 The lower 24 bits of the 
 .Va fflags

lib/libc/sys/ptrace.2

@@ -335,7 +335,7 @@ and/or memory.
 When
 .Dv PL_FLAG_SCX
 is set, this flag may be additionally specified to inform that the
-program being executed by debuggee process has been changed by succesful
+program being executed by debuggee process has been changed by successful
 execution of a system call from the
 .Fn execve 2
 family.

lib/libcam/cam.3

@@ -382,7 +382,7 @@ returns an allocated and partially initialized CCB, or NULL if allocation
 of the CCB failed.
 .Pp
 .Fn cam_send_ccb
-returns a value of -1 if an error occured, and
+returns a value of -1 if an error occurred, and
 .Va errno
 is set to indicate the error.
 .Pp

lib/libgpib/gpib.3

@@ -258,7 +258,7 @@ Device requests service
 .It SPOLL
 Serial Poll
 .It EVENT
-Event occured
+Event occurred
 .It CMPL
 I/O complete
 .It LOK

lib/libpmc/pmc.corei7.3

@@ -833,7 +833,7 @@ Counts mispredicted indirect branches that have a rear return mnemonic.
 Counts mispredicted non-indirect near calls executed, (should always be 0).
 .It Li BR_MISP_EXEC.INDIRECT_NEAR_CALL
 .Pq Event 89H , Umask 20H
-Counts mispredicted indirect near calls exeucted, including both register
+Counts mispredicted indirect near calls executed, including both register
 and memory indirect.
 .It Li BR_MISP_EXEC.NEAR_CALLS
 .Pq Event 89H , Umask 30H

lib/libpmc/pmc.mips.3

@@ -153,7 +153,7 @@ Floating point instructions completed.
 Integer and co-processor loads completed.
 .It Li STORE_COMPLETED
 .Pq Event 15, Counter 1
-Integer and co-porocessor stores completed.
+Integer and co-processor stores completed.
 .It Li BARRIER_COMPLETED
 .Pq Event 16, Counter 0
 Direct jump (and link) instructions completed.
@@ -225,10 +225,10 @@ valid instruction to the ALU.
 Counts the number of cycles where the ALU pipeline cannot advance.
 .It Li UNCACHED_LOAD
 .Pq Event 33, Counter 0
-Counts uncached and uncached acclerated loads.
+Counts uncached and uncached accelerated loads.
 .It Li UNCACHED_STORE
 .Pq Event 33, Counter 1
-Counts uncached and uncached acclerated stores.
+Counts uncached and uncached accelerated stores.
 .It Li CP2_REG_TO_REG_COMPLETED
 .Pq Event 35, Counter 0
 Co-processor 2 register to register instructions completed.

lib/libpmc/pmc.westmere.3

@@ -775,7 +775,7 @@ Counts mispredicted indirect branches that have a rear return mnemonic.
 Counts mispredicted non-indirect near calls executed, (should always be 0).
 .It Li BR_MISP_EXEC.INDIRECT_NEAR_CALL
 .Pq Event 89H , Umask 20H
-Counts mispredicted indirect near calls exeucted, including both register
+Counts mispredicted indirect near calls executed, including both register
 and memory indirect.
 .It Li BR_MISP_EXEC.NEAR_CALLS
 .Pq Event 89H , Umask 30H

lib/libpmc/pmc.westmereuc.3

@@ -715,7 +715,7 @@ qualified by mask value written to MSR 396H. The following mask values are
 supported:
 0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
 40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
 .It Li ADDR_OPCODE_MATCH.REMOTE
 .Pq Event 35H , Umask 02H
 Counts number of requests from the remote socket, address/opcode of request
@@ -723,7 +723,7 @@ is qualified by mask value written to MSR 396H. The following mask values
 are supported:
 0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
 40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
 .It Li ADDR_OPCODE_MATCH.LOCAL
 .Pq Event 35H , Umask 04H
 Counts number of requests from the local socket, address/opcode of request
@@ -731,7 +731,7 @@ is qualified by mask value written to MSR 396H. The following mask values
 are supported:
 0: NONE 40000000_00000000H:RSPFWDI 40001A00_00000000H:RSPFWDS
 40001D00_00000000H:RSPIWB
-Match opcode/addres s by writing MSR 396H with mask supported mask value
+Match opcode/address by writing MSR 396H with mask supported mask value
 .It Li QPI_TX_STALLED_SINGLE_FLIT.HOME.LINK_0
 .Pq Event 40H , Umask 01H
 Counts cycles the Quickpath outbound link 0 HOME virtual channel is stalled

lib/libusb/libusb.3

@@ -144,7 +144,7 @@ disconnected and a LIBUSB_ERROR code on error.
 .
 .Ft libusb_device_handle *
 .Fn libusb_open_device_with_vid_pid "libusb_context *ctx" "uint16_t vid" "uint16_t pid"
-Conveniance function to open a device with is 
+Convenience function to open a device with is 
 .Fa vid 
 and 
 .Fa pid.

lib/libutil/property.3

@@ -85,7 +85,7 @@ where
 is an alphanumeric string (and any punctuation not including the `=' character)
 and
 .Fa value
-is an arbitary string of text terminated by a newline character.
+is an arbitrary string of text terminated by a newline character.
 If newlines
 are desired, the entire value should be enclosed in { } (curly-bracket)
 characters.

libexec/ypxfr/ypxfr.8

@@ -90,7 +90,7 @@ and fills it with the contents of
 .Ar mapname
 as supplied by the specified
 .Ar source host .
-When the entire map has been transfered,
+When the entire map has been transferred,
 .Nm
 deletes the original copy of
 .Ar mapname

sbin/fsck/fsck.8

@@ -171,7 +171,7 @@ When running in background mode,
 only one file system at a time will be checked.
 Note that background
 .Nm
-is limited to checking for only the most commonly occuring
+is limited to checking for only the most commonly occurring
 file system abnormalities.
 Under certain circumstances,
 some errors can escape background

sbin/fsck_ffs/fsck_ffs.8

@@ -176,7 +176,7 @@ the super block for the file system.
 An alternate super block is usually located at block 32 for UFS1,
 and block 160 for UFS2.
 .It Fl C
-Check if file system was dismouted cleanly.
+Check if file system was dismounted cleanly.
 If so, skip file system checks (like "preen").
 However, if the file system was not cleanly dismounted, do full checks,
 is if

sbin/geom/class/part/gpart.8

@@ -177,7 +177,7 @@ option. SI unit suffixes are allowed. One or both
 .Fl b
 and
 .Fl s
-options can be ommitted. If so they are automatically calculated.
+options can be omitted. If so they are automatically calculated.
 The type of the partition is given by the
 .Fl t Ar type
 option.

sbin/geom/core/geom.8

@@ -57,7 +57,7 @@ The
 utility is used to control various GEOM classes.
 A class has to be aware of
 .Xr geom 8
-comunication methods, but there are also some standard commands
+communication methods, but there are also some standard commands
 which can be used for existing
 .Xr geom 8
 unaware classes.

sbin/ifconfig/ifconfig.8

@@ -604,7 +604,7 @@ If the interface was reset when previously marked down,
 the hardware will be re-initialized.
 .El
 .Pp
-The following parameters are for ICMPv6 Neightbor Discovery Protocol.
+The following parameters are for ICMPv6 Neighbor Discovery Protocol.
 Note that the address family keyword
 .Dq Li inet6
 is needed for them:
@@ -645,7 +645,7 @@ Set a flag to enable Neighbor Unreachability Detection.
 Clear a flag
 .Cm nud .
 .It Cm prefer_source
-Set a flag to prefer addesses on the interface as candidates of the
+Set a flag to prefer addresses on the interface as candidates of the
 source address for outgoing packets.
 .It Cm -prefer_source
 Clear a flag

sbin/ping6/ping6.8

@@ -429,7 +429,7 @@ The
 utility returns 0 on success (the host is alive),
 2 if the transmission was successful but no responses were received,
 any other non-zero value if the arguments are incorrect or                                                            
-another error has occured.                                                                                            
+another error has occurred.                                                                                            
 .Sh EXAMPLES
 Normally,
 .Nm

sbin/sunlabel/sunlabel.8

@@ -346,7 +346,7 @@ The following VTOC flags are known:
 Optionally, both the tag and/or the flag name may be specified
 numerically, using standard
 .Ql C
-numerial notation (prefix
+numerical notation (prefix
 .Ql 0x
 for hexadecimal numbers,
 .Ql 0

share/man/man4/cmx.4

@@ -43,10 +43,10 @@ smartcard reader.
 The driver provides a character device special file based
 .Em Chip/Smart Card Interface Devices (CCID)
 interface.  The driver implements what the vendor calls the
-.Em Synchronious API
+.Em Synchronous API
 onto the smartcard reader device.
 .Pp
-Reading and writing is synchronious, meaning that a call to
+Reading and writing is synchronous, meaning that a call to
 .Xr write 2
 directly corresponds to a complete CCID command sent to the
 device, while the following

share/man/man4/dc.4

@@ -315,7 +315,7 @@ possible transmit start threshold settings had been tried, so the
 driver programmed the chip for store and forward mode.
 In this mode,
 the NIC will not begin transmission until the entire packet has been
-transfered into its FIFO memory.
+transferred into its FIFO memory.
 .It "dc%d: chip is in D3 power state -- setting to D0"
 This message applies only to adapters which support power
 management.
@@ -434,7 +434,7 @@ can result in the receive filter being incorrectly programmed.
 The
 .Nm
 driver will watch for this condition and requeue the setup frame until
-it is transfered successfully.
+it is transferred successfully.
 .Pp
 The ADMtek AL981 chip (and possibly the AN985 as well) has been observed
 to sometimes wedge on transmit: this appears to happen when the driver

share/man/man4/gre.4

@@ -333,7 +333,7 @@ over the
 interface itself.
 .Pp
 The current implementation uses the key only for outgoing packets.
-Incomming packets with a different key or without a key will be treated as if they
+Incoming packets with a different key or without a key will be treated as if they
 would belong to this interface.
 .Pp
 RFC1701 is not fully supported, however all unsupported features have been

share/man/man4/meteor.4

@@ -652,7 +652,7 @@ continuous capture.
 The single frame capture
 .Xr ioctl 2
 request will return only after a
-frame has been captured and transfered to the frame buffer.
+frame has been captured and transferred to the frame buffer.
 .Pp
 The unsynchronized continuous capture will return immediately and
 data is directly deposited into the buffer when it is available.

share/man/man4/net80211.4

@@ -283,7 +283,7 @@ according to a least-congested criteria.
 DFS support is mandatory for some 5Ghz frequencies in certain
 locales (e.g. ETSI).
 By default DFS is enabled according to the regulatory definitions
-and the curent country code, regdomain, and channel.
+and the current country code, regdomain, and channel.
 .It Dv IEEE80211_IOC_DOTD
 Return whether or not 802.11d support is enabled in
 .Va i_val .

share/man/man4/ng_car.4

@@ -30,7 +30,7 @@
 .Os
 .Sh NAME
 .Nm ng_car
-.Nd Commited Access Rate netgraph node type
+.Nd Committed Access Rate netgraph node type
 .Sh SYNOPSIS
 .In netgraph/ng_car.h
 .Sh DESCRIPTION

share/man/man4/pcii.4

@@ -46,7 +46,7 @@ driver provides support for driving an IEEE-488 bus, also called
 IEC-625 (or just "IEC bus"), or HP-IB (Hewlett Packard Instrument
 Bus), or GPIB (General Purpose Instrument Bus).
 The driver supports National Instruments PCIIA cards (sometimes
-also refered to as PC2A) and compatibles.
+also referred to as PC2A) and compatibles.
 These cards use a NEC \(mcPD7210 controller IC as the main
 interface between the host computer and the instrument bus.
 .Ss IO memory space layout

share/man/man4/pcm.4

@@ -167,7 +167,7 @@ There were no single standard, so much care has been taken to try
 to satisfy each possible scenario, despite the fact that each
 application has its own conflicting standard.
 .Ss EQ
-The Parametric Software Equlizer (EQ) enables the use of
+The Parametric Software Equalizer (EQ) enables the use of
 .Dq tone
 controls (bass and treble).
 Commonly used for ear-candy or frequency compensation due to the vast
@@ -237,7 +237,7 @@ are device specific.
 .It Va hw.snd.compat_linux_mmap
 Linux
 .Xr mmap 2
-compatability.
+compatibility.
 The following values are supported (default is 0):
 .Bl -tag -width 2n
 .It -1

share/man/man4/sctp.4

@@ -386,7 +386,7 @@ special flag
 .Dv SCTP_EOR
 passed in the sctp_sndrcvinfo flags field.
 This effectively makes all sends part of the same message
-until the user specifices differently.
+until the user specifies differently.
 This means that a caller must NOT change the stream number until
 after the
 .Dv SCTP_EOR

share/man/man9/BUS_NEW_PASS.9

@@ -45,7 +45,7 @@ method is called on each bus device to rescan the device tree when the pass
 level has been changed.
 This method is responsible for invoking
 .Xr BUS_NEW_PASS 9
-on child bus devices to propogate the rescan to child devices.
+on child bus devices to propagate the rescan to child devices.
 It is also responsible for reprobing any unattached child devices and
 allowing drivers for the current pass to identify new children.
 A default implementation is provided by

share/man/man9/ieee80211_vap.9

@@ -117,7 +117,7 @@ to deactivate the vap and isolate it from activities such as requests
 from user applications.
 The driver can then reclaim resources held by the vap and re-enable
 device operation.
-The exact procedure for quiesceing a device is unspecified but typically
+The exact procedure for quiescing a device is unspecified but typically
 it involves blocking interrupts and stopping transmit and receive
 processing.
 .Sh MULTI-VAP OPERATION

share/man/man9/rman.9

@@ -157,10 +157,10 @@ shall be set to a string that describes the resource to be managed.
 It also initializes any mutexes associated with the structure.
 If
 .Fn rman_init
-fails to initalize the mutex, it will return
+fails to initialize the mutex, it will return
 .Er ENOMEM ; otherwise it will return 0 and
 .Fa rm
-will be initalized.
+will be initialized.
 .Pp
 The
 .Fn rman_fini

usr.bin/du/du.1

@@ -72,7 +72,7 @@ This is different from the
 .Fl k, m
 options or setting
 .Ev BLOCKSIZE
-and gives an estimate of how much space the examined file hierachy would
+and gives an estimate of how much space the examined file hierarchy would
 require on a filesystem with the given
 .Ar blocksize .
 Unless in

usr.bin/fstat/fstat.1

@@ -192,7 +192,7 @@ the name printed may not be the actual
 name that the process originally used to open that file.
 .El
 .Sh SOCKETS
-The formating of open sockets depends on the protocol domain.
+The formatting of open sockets depends on the protocol domain.
 In all cases the first field is the domain name, the second field
 is the socket type (stream, dgram, etc), and the third is the socket
 flags field (in hex).

usr.bin/rwall/rwall.1

@@ -66,7 +66,7 @@ daemon has terminated on the remote host.
 .It rwall: RPC: Port mapper failure - RPC: Timed out
 The remote host is not running the portmapper (see
 .Xr rpcbind 8 ) ,
-and cannot accomodate any RPC-based services.
+and cannot accommodate any RPC-based services.
 The host may be down.
 .El
 .Sh SEE ALSO

usr.sbin/bsnmpd/modules/snmp_bridge/snmp_bridge.3

@@ -66,7 +66,7 @@ index and set the status of the interface to "active/up".
 will attempt to destroy the bridge interface.
 .El
 .It Va begemotBridgeBaseSpanEnabled
-A SNMP SET operation on this object is only successfull if the corresponding
+A SNMP SET operation on this object is only successful if the corresponding
 port has not been added as member of the bridge interface on the system.
 .It Va begemotBridgeBasePortStatus
 SNMP SET operations with the following values are allowed:

usr.sbin/bsnmpd/modules/snmp_wlan/snmp_wlan.3

@@ -77,7 +77,7 @@ column should be executed.
 The table contains information about the hardware capabilities of the parent of
 a wireless interface.
 .It Va wlanIfaceConfigTable
-The table is used to get or set various configuration paremeters for a virtual
+The table is used to get or set various configuration parameters for a virtual
 wireless interface. Depending on the operating mode of the interface and the
 hardware capabilities of the underlying hardware interface, not all parameters
 and values may be supported.
@@ -104,7 +104,7 @@ WEP configuration for the wireless interfaces on the system.
 Access Control configuration for wireless interfaces operating as access points.
 .It Va wlanMACAccessControlMACTable
 The table with Access Control MAC entries for which the configured Access
-Control POlicy on wireless interfaces operating in Host AP mode is applied.
+Control Policy on wireless interfaces operating in Host AP mode is applied.
 .Va wlanMACAccessControlMACStatus
 column is used to add or delete MAC ACL entries. A set with value createAndGo(4)
 will add new entry, while with value destroy(6) will delete an existing one.

usr.sbin/lpr/lpr/printcap.5

@@ -367,7 +367,7 @@ is not in use), print data will be sent directly to the given
 on the given
 .Em machine .
 .Sh TRANSFER STATISTICS
-When a print job is transfered to a remote machine (which might be
+When a print job is transferred to a remote machine (which might be
 another unix box, or may be a network printer), it may be useful
 to keep statistics on each transfer.
 The

usr.sbin/makefs/makefs.8

@@ -204,7 +204,7 @@ If
 isn't provided, the current file flags will be used.
 Missing regular file entries will be created as zero-length files.
 .It Fl x
-Exclude file system nodes not explcitly listed in the specfile.
+Exclude file system nodes not explicitly listed in the specfile.
 .It Fl N Ar dbdir
 Use the user database text file
 .Pa master.passwd

usr.sbin/mfiutil/mfiutil.8

@@ -254,7 +254,7 @@ The default locale is
 The available locales are
 .Dq volume ,
 .Dq drive ,
-.Dq enclousure ,
+.Dq enclosure ,
 .Dq battery ,
 .Dq sas ,
 .Dq controller ,

usr.sbin/nfsd/stablerestart.5

@@ -58,7 +58,7 @@ end of the grace period.
 The rest of the file are appended records, as defined by
 struct nfst_rec in /usr/include/fs/nfs/nfsrvstate.h and are used
 represent one of two things. There are records which indicate that a
-client successfully aquired state and records that indicate a client's state was revoked.
+client successfully acquired state and records that indicate a client's state was revoked.
 State revoke records indicate that state information
 for a client was discarded, due to lease expiry and an otherwise
 conflicting open or lock request being made by a different client.

usr.sbin/nfsuserd/nfsuserd.8

@@ -57,7 +57,7 @@ The following options are available:
 .It Fl domain Ar domain_name
 This option allows you to override the default DNS domain name, which
 is acquired by taking either the suffix on the machine's hostname or,
-if that name is not a fully qualified host name, the cannonical name as
+if that name is not a fully qualified host name, the canonical name as
 reported by
 .Xr getaddrinfo 3 .
 .It Fl usertimeout Ar minutes

usr.sbin/ntp/doc/ntp.conf.5

@@ -317,7 +317,7 @@ the
 option to a lower limit of 4 (16 s).
 .It Cm noselect
 Marks the server as unused, except for display purposes.
-The server is discarded by the selection algroithm.
+The server is discarded by the selection algorithm.
 .It Cm prefer
 Marks the server as preferred.
 All other things being equal,
@@ -1405,9 +1405,9 @@ at abusive rates.
 Some violations cause denied service
 only for the offending packet, others cause denied service
 for a timed period and others cause the denied service for
-an indefinate period.
+an indefinite period.
 When a client or network is denied access
-for an indefinate period, the only way at present to remove
+for an indefinite period, the only way at present to remove
 the restrictions is by restarting the server.
 .Ss The Kiss-of-Death Packet
 Ordinarily, packets denied service are simply dropped with no

usr.sbin/ntp/doc/ntpq.8

@@ -269,7 +269,7 @@ Exit
 .It Ic raw
 Causes all output from query commands is printed as received
 from the remote server.
-The only formating/interpretation done on
+The only formatting/interpretation done on
 the data is to transform nonascii data into a printable (but barely
 understandable) form.
 .It Ic timeout Ar milliseconds