diff --git a/sys/dev/fe/if_fe.c b/sys/dev/fe/if_fe.c
index 4cb7da08549a..e4e39a6f313b 100644
--- a/sys/dev/fe/if_fe.c
+++ b/sys/dev/fe/if_fe.c
@@ -232,7 +232,7 @@ fe_simple_probe (struct fe_softc const * sc,
    address.  "Vendor" is an expected vendor code (first three bytes,)
    or a zero when nothing expected.  */
 int
-valid_Ether_p (u_char const * addr, unsigned vendor)
+fe_valid_Ether_p (u_char const * addr, unsigned vendor)
 {
 #ifdef FE_DEBUG
 	printf("fe?: validating %6D against %06x\n", addr, ":", vendor);
diff --git a/sys/dev/fe/if_fe_cbus.c b/sys/dev/fe/if_fe_cbus.c
index b92cc3df9a97..f35624362ef6 100644
--- a/sys/dev/fe/if_fe_cbus.c
+++ b/sys/dev/fe/if_fe_cbus.c
@@ -320,7 +320,7 @@ fe_probe_re1000(device_t dev)
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
 
 	/* Make sure it is Allied-Telesis's.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0x0000F4))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x0000F4))
 		return ENXIO;
 #if 1
 	/* Calculate checksum.  */
@@ -371,7 +371,7 @@ fe_probe_jli_re1000p(struct fe_softc * sc, u_char const * eeprom)
 	/* Get our station address from EEPROM, and make sure the
            EEPROM contains Allied-Telesis's address.  */
 	bcopy(eeprom + 8, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x0000F4))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x0000F4))
 		return NULL;
 
 	/* I don't know any sub-model identification.  */
@@ -544,7 +544,7 @@ fe_probe_cnet9ne (device_t dev)
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
 
 	/* Make sure it is Contec's.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00804C))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00804C))
 		return ENXIO;
 
 	/* Determine the card type.  */
@@ -630,7 +630,7 @@ fe_probe_ssi(device_t dev)
 	fe_read_eeprom_ssi(sc, eeprom);
 
 	/* Make sure the Ethernet (MAC) station address is of Contec's.  */
-	if (!valid_Ether_p(eeprom + FE_SSI_EEP_ADDR, 0x00804C))
+	if (!fe_valid_Ether_p(eeprom + FE_SSI_EEP_ADDR, 0x00804C))
 		return ENXIO;
 	bcopy(eeprom + FE_SSI_EEP_ADDR, sc->sc_enaddr, ETHER_ADDR_LEN);
 
@@ -700,7 +700,7 @@ fe_probe_lnx(device_t dev)
 	fe_read_eeprom_lnx(sc, eeprom);
 
 	/* Make sure the Ethernet (MAC) station address is of TDK/LANX's.  */
-	if (!valid_Ether_p(eeprom, 0x008098))
+	if (!fe_valid_Ether_p(eeprom, 0x008098))
 		return ENXIO;
 	bcopy(eeprom, sc->sc_enaddr, ETHER_ADDR_LEN);
 
@@ -768,12 +768,12 @@ fe_probe_gwy(device_t dev)
 
 	/* Get our station address from EEPROM. */
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x000000))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x000000))
 		return ENXIO;
 
 	/* Determine the card type.  */
 	sc->typestr = "Generic MB86960 Ethernet";
-	if (valid_Ether_p(sc->sc_enaddr, 0x000061))
+	if (fe_valid_Ether_p(sc->sc_enaddr, 0x000061))
 		sc->typestr = "Gateway Ethernet (Fujitsu chipset)";
 
 	/* Gateway's board requires an explicit IRQ to work, since it
@@ -834,7 +834,7 @@ fe_probe_ubn(device_t dev)
 
 	/* Get our station address form ID ROM and make sure it is UBN's.  */
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00DD01))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00DD01))
 		goto fail_ubn;
 #if 1
 	/* Calculate checksum.  */
@@ -975,8 +975,8 @@ fe_probe_rex(device_t dev)
 		sc->sc_enaddr[i] = eeprom[7 - i];
 
 	/* Make sure it is RATOC's.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00C0D0) &&
-	    !valid_Ether_p(sc->sc_enaddr, 0x00803D))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00C0D0) &&
+	    !fe_valid_Ether_p(sc->sc_enaddr, 0x00803D))
 		return 0;
 
 	/* Setup the board type.  */
diff --git a/sys/dev/fe/if_fe_isa.c b/sys/dev/fe/if_fe_isa.c
index b1fa3e01d41c..940be5b00196 100644
--- a/sys/dev/fe/if_fe_isa.c
+++ b/sys/dev/fe/if_fe_isa.c
@@ -252,7 +252,7 @@ fe_probe_fmv(device_t dev)
 	/* Get our station address from EEPROM, and make sure it is
            Fujitsu's.  */
 	fe_inblk(sc, FE_FMV4, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00000E))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00000E))
 		return ENXIO;
 
 	/* Find the supported media and "hardware revision" to know
@@ -387,7 +387,7 @@ fe_probe_jli_ati(struct fe_softc * sc, u_char const * eeprom)
 	/* Get our station address from EEPROM, and make sure the
            EEPROM contains ATI's address.  */
 	bcopy(eeprom + 8, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x0000F4))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x0000F4))
 		return NULL;
 
 	/*
@@ -508,12 +508,12 @@ fe_probe_jli_icl(struct fe_softc * sc, u_char const * eeprom)
 	/* Make sure the EEPROM contains ICL's permanent station
            address.  If it isn't, probably this board is not an
            ICL's.  */
-	if (!valid_Ether_p(eeprom+122, 0x00004B))
+	if (!fe_valid_Ether_p(eeprom+122, 0x00004B))
 		return NULL;
 
 	/* Check if the "configured" Ethernet address in the EEPROM is
 	   valid.  Use it if it is, or use the "permanent" address instead.  */
-	if (valid_Ether_p(eeprom+4, 0x020000)) {
+	if (fe_valid_Ether_p(eeprom+4, 0x020000)) {
 		/* The configured address is valid.  Use it.  */
 		bcopy(eeprom+4, sc->sc_enaddr, ETHER_ADDR_LEN);
 	} else {
@@ -621,7 +621,7 @@ fe_probe_jli_rex(struct fe_softc * sc, u_char const * eeprom)
 	sc->sc_enaddr[5] = eeprom[6];
 
 	/* Make sure the EEPROM contains RATOC's station address.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00C0D0))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00C0D0))
 		return NULL;
 
 	/* I don't know any sub-model identification.  */
@@ -658,7 +658,7 @@ fe_probe_jli_unk(struct fe_softc * sc, u_char const * eeprom)
 
 	/* Look for a bit pattern which looks like a MAC address.  */
 	for (n = 2; n <= romsize - ETHER_ADDR_LEN; n += 2) {
-		if (!valid_Ether_p(eeprom + n, 0x000000))
+		if (!fe_valid_Ether_p(eeprom + n, 0x000000))
 			continue;
 	}
 
@@ -839,7 +839,7 @@ fe_probe_ssi(device_t dev)
 	fe_read_eeprom_ssi(sc, eeprom);
 
 	/* Make sure the Ethernet (MAC) station address is of TDK's.  */
-	if (!valid_Ether_p(eeprom+FE_SSI_EEP_ADDR, 0x008098))
+	if (!fe_valid_Ether_p(eeprom+FE_SSI_EEP_ADDR, 0x008098))
 		return ENXIO;
 	bcopy(eeprom + FE_SSI_EEP_ADDR, sc->sc_enaddr, ETHER_ADDR_LEN);
 
@@ -900,7 +900,7 @@ fe_probe_lnx(device_t dev)
 	fe_read_eeprom_lnx(sc, eeprom);
 
 	/* Make sure the Ethernet (MAC) station address is of TDK/LANX's.  */
-	if (!valid_Ether_p(eeprom, 0x008098))
+	if (!fe_valid_Ether_p(eeprom, 0x008098))
 		return ENXIO;
 	bcopy(eeprom, sc->sc_enaddr, ETHER_ADDR_LEN);
 
@@ -965,7 +965,7 @@ fe_probe_gwy(device_t dev)
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
 
 	/* Make sure it is Gateway Communication's.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0x000061))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x000061))
 		return ENXIO;
 
 	/* Gateway's board requires an explicit IRQ to work, since it
@@ -1017,7 +1017,7 @@ fe_probe_ubn(device_t dev)
 
 	/* Get our station address form ID ROM and make sure it is UBN's.  */
 	fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN);
-	if (!valid_Ether_p(sc->sc_enaddr, 0x00DD01))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00DD01))
 		return ENXIO;
 #if 0
 	/* Calculate checksum.  */
diff --git a/sys/dev/fe/if_fe_pccard.c b/sys/dev/fe/if_fe_pccard.c
index afc793226f25..edca4c397c25 100644
--- a/sys/dev/fe/if_fe_pccard.c
+++ b/sys/dev/fe/if_fe_pccard.c
@@ -243,7 +243,7 @@ fe_probe_mbh(device_t dev)
 	fe_inblk(sc, FE_MBH10, sc->sc_enaddr, ETHER_ADDR_LEN);
 
 	/* Make sure we got a valid station address.  */
-	if (!valid_Ether_p(sc->sc_enaddr, 0))
+	if (!fe_valid_Ether_p(sc->sc_enaddr, 0))
 		return ENXIO;
 
 	/* Determine the card type.  */
@@ -299,7 +299,7 @@ fe_probe_tdk (device_t dev)
         sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
 
         /* Make sure we got a valid station address.  */
-        if (!valid_Ether_p(sc->sc_enaddr, 0))
+        if (!fe_valid_Ether_p(sc->sc_enaddr, 0))
 		return ENXIO;
 
         return 0;
diff --git a/sys/dev/fe/if_fevar.h b/sys/dev/fe/if_fevar.h
index 99f7184a4a51..bdf9637ad986 100644
--- a/sys/dev/fe/if_fevar.h
+++ b/sys/dev/fe/if_fevar.h
@@ -139,7 +139,7 @@ void	fe_release_resource(device_t);
 
 int	fe_simple_probe(struct fe_softc const *,
 			struct fe_simple_probe_struct const *);
-int	valid_Ether_p(u_char const *, unsigned);
+int	fe_valid_Ether_p(u_char const *, unsigned);
 void	fe_softc_defaults(struct fe_softc *);
 void	fe_stop(struct fe_softc *sc);
 void	fe_irq_failure(char const *, int, int, char const *);