d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Revert and redo r306083.

Browse Source 
Update the device tree source files to a Linux 4.7-RC.

The dts tree currently can't be merged w/o specific revisions.

Note: due to a stupid bug in the commit checking script, I couldn't
just remove the svn:keyword tag from the new files, I had to add
fbsd:nokeywords to all the files (including ones that didn't need it)
This commit is contained in:
Warner Losh 2016-09-22 15:17:36 +00:00
commit fad63e2d45
512 changed files with 18414 additions and 11790 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
sys/gnu/dts/arm/alpine.dtsi
View File

@ -155,6 +155,16 @@
ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
bus-range = <0x00 0x00>;
msi-parent = <&msix>;
};
msix: msix@fbe00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
interrupt-controller;
msi-controller;
al,msi-base-spi = <96>;
al,msi-num-spis = <64>;
};
};
};

402
sys/gnu/dts/arm/am335x-baltos-ir5221.dts
View File

@ -13,83 +13,19 @@
/dts-v1/;
#include "am33xx.dtsi"
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am335x-baltos.dtsi"
/ {
model = "OnRISC Baltos iR 5221";
compatible = "vscom,onrisc", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 8 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
@ -98,19 +34,12 @@
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
@ -122,8 +51,8 @@
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
@ -133,150 +62,6 @@
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
&elm {
status = "okay";
};
&gpmc {
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
status = "okay";
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart1 {
@ -286,8 +71,6 @@
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -299,35 +82,11 @@
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <28 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tps65910_pins>;
};
at24@50 {
compatible = "at24,24c02";
pagesize = <8>;
reg = <0x50>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
@ -340,14 +99,6 @@
};
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&usb0_phy {
status = "okay";
};
@ -366,112 +117,13 @@
dr_mode = "otg";
};
&cppi41dma {
status = "okay";
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
ti,en-ck32k-xtal = <1>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1312500>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
@ -484,42 +136,6 @@
rmii-clock-ext = <1>;
};
&mmc1 {
vmmc-supply = <&vmmc_reg>;
status = "okay";
};
&mmc2 {
status = "okay";
vmmc-supply = <&wl12xx_vmmc>;
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1835";
reg = <2>;
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
};
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
ti,no-reset-on-init;
};
&dcan1 {
pinctrl-names = "default";
pinctrl-0 = <&dcan1_pins>;

14
sys/gnu/dts/arm/am335x-bone-common.dtsi
View File

@ -285,8 +285,10 @@
};
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@ -307,17 +309,12 @@
ti,pmic-shutdown-controller;
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -327,7 +324,6 @@
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -337,25 +333,21 @@
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};

75
sys/gnu/dts/arm/am335x-chiliboard.dts
View File

@ -35,6 +35,59 @@
};
&am33xx_pinmux {
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
@ -61,12 +114,34 @@
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&ldo4_reg {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/* Ethernet */
&mac {
slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";

99
sys/gnu/dts/arm/am335x-chilisom.dtsi
View File

@ -7,6 +7,7 @@
* published by the Free Software Foundation.
*/
#include "am33xx.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Grinn AM335x ChiliSOM";
@ -34,59 +35,6 @@
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
@ -108,13 +56,6 @@
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@ -128,21 +69,16 @@
};
/include/ "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -152,7 +88,6 @@
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -162,28 +97,24 @@
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
@ -191,20 +122,8 @@
};
};
/* Ethernet MAC */
&mac {
slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
&rtc {
system-power-controller;
};
/* NAND Flash */
@ -218,7 +137,12 @@
pinctrl-0 = <&nandflash_pins>;
ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
@ -237,12 +161,9 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
};

181
sys/gnu/dts/arm/am335x-cm-t335.dts
View File

@ -11,6 +11,7 @@
/dts-v1/;
#include "am33xx.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "CompuLab CM-T335";
@ -40,12 +41,51 @@
regulator-max-microvolt = <3300000>;
};
/* Regulator for WiFi */
vwlan_fixed: fixedregulator@2 {
compatible = "regulator-fixed";
regulator-name = "vwlan_fixed";
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
enable-active-high;
regulator-boot-off;
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 0>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "cm-t335";
simple-audio-card,widgets =
"Microphone", "Mic Jack",
"Line", "Line In",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "LHPOUT",
"Headphone Jack", "RHPOUT",
"LLINEIN", "Line In",
"RLINEIN", "Line In",
"MICIN", "Mic Jack";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sound_master>;
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
};
sound_master: simple-audio-card,codec {
sound-dai = <&tlv320aic23>;
system-clock-frequency = <12000000>;
};
};
};
&am33xx_pinmux {
@ -134,6 +174,24 @@
>;
};
dcan0_pins: pinmux_dcan0_pins {
pinctrl-single,pins = <
/* uart1_ctsn.dcan0_tx */
AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
/* uart1_rtsn.dcan0_rx */
AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
/* uart1_rxd.dcan1_tx */
AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
/* uart1_txd.dcan1_rx */
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
>;
};
ecap0_pins: pinmux_ecap0_pins {
pinctrl-single,pins = <
/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
@ -223,6 +281,21 @@
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
/* spi0_sclk.spi0_sclk */
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
/* spi0_d0.spi0_d0 */
AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
/* spi0_d1.spi0_d1 */
AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
/* spi0_cs0.spi0_cs0 */
AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
/* spi0_cs1.spi0_cs1 */
AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
>;
};
/* wl1271 bluetooth */
bluetooth_pins: pinmux_bluetooth_pins {
pinctrl-single,pins = <
@ -230,6 +303,30 @@
AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
/* TLV320AIC23B codec */
mcasp1_pins: pinmux_mcasp1_pins {
pinctrl-single,pins = <
/* MII1_CRS.mcasp1_aclkx */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
/* MII1_RX_ER.mcasp1_fsx */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
/* MII1_COL.mcasp1_axr2 */
AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
/* RMII1_REF_CLK.mcasp1_axr3 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
>;
};
/* wl1271 WiFi */
wifi_pins: pinmux_wifi_pins {
pinctrl-single,pins = <
/* EMU1.gpio3_8 - WiFi IRQ */
AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
>;
};
};
&uart0 {
@ -264,6 +361,13 @@ status = "okay";
compatible = "emmicro,em3027";
reg = <0x56>;
};
/* Audio codec */
tlv320aic23: codec@1a {
compatible = "ti,tlv320aic23";
reg = <0x1a>;
#sound-dai-cells= <0>;
status = "okay";
};
};
&usb {
@ -302,7 +406,12 @@ status = "okay";
pinctrl-0 = <&nandflash_pins>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
@ -321,12 +430,9 @@ status = "okay";
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
@ -394,3 +500,70 @@ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
};
&dcan0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dcan0_pins>;
};
&dcan1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dcan1_pins>;
};
/* Touschscreen and analog digital converter */
&tscadc {
status = "okay";
tsc {
ti,wires = <4>;
ti,x-plate-resistance = <200>;
ti,coordinate-readouts = <5>;
ti,wire-config = <0x01 0x10 0x23 0x32>;
ti,charge-delay = <0x400>;
};
adc {
ti,adc-channels = <4 5 6 7>;
};
};
/* CPU audio */
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 16 serializers */
num-serializer = <16>;
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
>;
tx-num-evt = <1>;
rx-num-evt = <1>;
#sound-dai-cells= <0>;
status = "okay";
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
ti,pindir-d0-out-d1-in = <1>;
/* WLS1271 WiFi */
wlcore: wlcore@1 {
compatible = "ti,wl1271";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins>;
reg = <1>;
spi-max-frequency = <48000000>;
clock-xtal;
ref-clock-frequency = <38400000>;
interrupt-parent = <&gpio3>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
vwlan-supply = <&vwlan_fixed>;
};
};

8
sys/gnu/dts/arm/am335x-evm.dts
View File

@ -519,7 +519,12 @@
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
@ -538,12 +543,9 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */

9
sys/gnu/dts/arm/am335x-igep0033.dtsi
View File

@ -11,6 +11,7 @@
/dts-v1/;
#include "am33xx.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
cpus {
@ -129,7 +130,12 @@
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-width = <1>;
@ -147,12 +153,9 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;

14
sys/gnu/dts/arm/am335x-nano.dts
View File

@ -375,15 +375,11 @@
wp-gpios = <&gpio3 18 0>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
@ -392,7 +388,6 @@
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
@ -402,7 +397,6 @@
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
@ -412,7 +406,6 @@
};
ldo1_reg: regulator@3 {
reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -421,7 +414,6 @@
};
ldo2_reg: regulator@4 {
reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
@ -430,7 +422,6 @@
};
ldo3_reg: regulator@5 {
reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
@ -439,7 +430,6 @@
};
ldo4_reg: regulator@6 {
reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;

14
sys/gnu/dts/arm/am335x-pepper.dts
View File

@ -420,9 +420,9 @@
vin-supply = <&vbat>;
};
&tps {
compatible = "ti,tps65217";
/include/ "tps65217.dtsi"
&tps {
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@ -430,17 +430,12 @@
};
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -450,7 +445,6 @@
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -460,21 +454,18 @@
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
@ -482,7 +473,6 @@
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;

9
sys/gnu/dts/arm/am335x-phycore-som.dtsi
View File

@ -8,6 +8,7 @@
*/
#include "am33xx.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Phytec AM335x phyCORE";
@ -165,7 +166,12 @@
pinctrl-0 = <&nandflash_pins>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
nandflash: nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";
@ -184,13 +190,10 @@
gpmc,access-ns = <30>;
gpmc,rd-cycle-ns = <30>;
gpmc,wr-cycle-ns = <30>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <50>;
gpmc,cycle2cycle-diffcsen;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <30>;
gpmc,wr-data-mux-bus-ns = <0>;

6
sys/gnu/dts/arm/am335x-shc.dts
View File

@ -46,7 +46,7 @@
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
front_button {
@ -54,7 +54,7 @@
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
debounce-interval = <1000>;
gpio-key,wakeup;
wakeup-source;
};
};
@ -138,7 +138,7 @@
&epwmss1 {
status = "okay";
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
pinctrl-names = "default";
pinctrl-0 = <&ehrpwm1_pins>;
status = "okay";

37
sys/gnu/dts/arm/am335x-sl50.dts
View File

@ -19,6 +19,10 @@
};
};
chosen {
stdout-path = &uart0;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -63,12 +67,28 @@
default-brightness-level = <6>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
/* audio external oscillator */
tlv320aic3x_mclk: oscillator@0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>; /* 24.576MHz */
};
};
sound {
compatible = "ti,da830-evm-audio";
ti,model = "AM335x-SL50";
ti,audio-codec = <&audio_codec>;
ti,mcasp-controller = <&mcasp0>;
ti,codec-clock-rate = <12000000>;
clocks = <&tlv320aic3x_mclk>;
clock-names = "mclk";
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
@ -226,7 +246,7 @@
AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
>;
};
@ -375,19 +395,16 @@
pinctrl-0 = <&uart4_pins>;
};
#include "tps65217.dtsi"
&tps {
compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@ -395,7 +412,6 @@
};
dcdc2_reg: regulator@1 {
reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@ -405,7 +421,6 @@
};
dcdc3_reg: regulator@2 {
reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@ -415,7 +430,6 @@
};
ldo1_reg: regulator@3 {
reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
@ -423,7 +437,6 @@
};
ldo2_reg: regulator@4 {
reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
@ -431,7 +444,6 @@
};
ldo3_reg: regulator@5 {
reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -439,7 +451,6 @@
};
ldo4_reg: regulator@6 {
reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

90
sys/gnu/dts/arm/am33xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
sys_clkin_ck: sys_clkin_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@ -163,7 +163,7 @@
clock-frequency = <12000000>;
};
dpll_core_ck: dpll_core_ck {
dpll_core_ck: dpll_core_ck@490 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@ -176,7 +176,7 @@
clocks = <&dpll_core_ck>;
};
dpll_core_m4_ck: dpll_core_m4_ck {
dpll_core_m4_ck: dpll_core_m4_ck@480 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -185,7 +185,7 @@
ti,index-starts-at-one;
};
dpll_core_m5_ck: dpll_core_m5_ck {
dpll_core_m5_ck: dpll_core_m5_ck@484 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -194,7 +194,7 @@
ti,index-starts-at-one;
};
dpll_core_m6_ck: dpll_core_m6_ck {
dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -203,14 +203,14 @@
ti,index-starts-at-one;
};
dpll_mpu_ck: dpll_mpu_ck {
dpll_mpu_ck: dpll_mpu_ck@488 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0488>, <0x0420>, <0x042c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck {
dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_mpu_ck>;
@ -219,14 +219,14 @@
ti,index-starts-at-one;
};
dpll_ddr_ck: dpll_ddr_ck {
dpll_ddr_ck: dpll_ddr_ck@494 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0494>, <0x0434>, <0x0440>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck {
dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_ck>;
@ -243,14 +243,14 @@
clock-div = <2>;
};
dpll_disp_ck: dpll_disp_ck {
dpll_disp_ck: dpll_disp_ck@498 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0498>, <0x0448>, <0x0454>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck {
dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_disp_ck>;
@ -260,14 +260,14 @@
ti,set-rate-parent;
};
dpll_per_ck: dpll_per_ck {
dpll_per_ck: dpll_per_ck@48c {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x048c>, <0x0470>, <0x049c>;
};
dpll_per_m2_ck: dpll_per_m2_ck {
dpll_per_m2_ck: dpll_per_m2_ck@4ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_per_ck>;
@ -292,7 +292,7 @@
clock-div = <4>;
};
cefuse_fck: cefuse_fck {
cefuse_fck: cefuse_fck@a20 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@ -316,7 +316,7 @@
clock-div = <732>;
};
clkdiv32k_ick: clkdiv32k_ick {
clkdiv32k_ick: clkdiv32k_ick@14c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ck>;
@ -332,14 +332,14 @@
clock-div = <1>;
};
pruss_ocp_gclk: pruss_ocp_gclk {
pruss_ocp_gclk: pruss_ocp_gclk@530 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
reg = <0x0530>;
};
mmu_fck: mmu_fck {
mmu_fck: mmu_fck@914 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@ -347,56 +347,56 @@
reg = <0x0914>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@528 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
reg = <0x0528>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@508 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0508>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@50c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x050c>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@510 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0510>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@518 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0518>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@51c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x051c>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@504 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0504>;
};
usbotg_fck: usbotg_fck {
usbotg_fck: usbotg_fck@47c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_ck>;
@ -412,7 +412,7 @@
clock-div = <2>;
};
ieee5000_fck: ieee5000_fck {
ieee5000_fck: ieee5000_fck@e4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_div2_ck>;
@ -420,7 +420,7 @@
reg = <0x00e4>;
};
wdt1_fck: wdt1_fck {
wdt1_fck: wdt1_fck@538 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@ -483,21 +483,21 @@
clock-div = <2>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
reg = <0x0520>;
};
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
reg = <0x053c>;
};
gpio0_dbclk: gpio0_dbclk {
gpio0_dbclk: gpio0_dbclk@408 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&gpio0_dbclk_mux_ck>;
@ -505,7 +505,7 @@
reg = <0x0408>;
};
gpio1_dbclk: gpio1_dbclk {
gpio1_dbclk: gpio1_dbclk@ac {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -513,7 +513,7 @@
reg = <0x00ac>;
};
gpio2_dbclk: gpio2_dbclk {
gpio2_dbclk: gpio2_dbclk@b0 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -521,7 +521,7 @@
reg = <0x00b0>;
};
gpio3_dbclk: gpio3_dbclk {
gpio3_dbclk: gpio3_dbclk@b4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -529,7 +529,7 @@
reg = <0x00b4>;
};
lcd_gclk: lcd_gclk {
lcd_gclk: lcd_gclk@534 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@ -545,7 +545,7 @@
clock-div = <2>;
};
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
@ -553,7 +553,7 @@
reg = <0x052c>;
};
gfx_fck_div_ck: gfx_fck_div_ck {
gfx_fck_div_ck: gfx_fck_div_ck@52c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&gfx_fclk_clksel_ck>;
@ -561,14 +561,14 @@
ti,max-div = <2>;
};
sysclkout_pre_ck: sysclkout_pre_ck {
sysclkout_pre_ck: sysclkout_pre_ck@700 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
reg = <0x0700>;
};
clkout2_div_ck: clkout2_div_ck {
clkout2_div_ck: clkout2_div_ck@700 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclkout_pre_ck>;
@ -577,7 +577,7 @@
reg = <0x0700>;
};
dbg_sysclk_ck: dbg_sysclk_ck {
dbg_sysclk_ck: dbg_sysclk_ck@414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@ -585,7 +585,7 @@
reg = <0x0414>;
};
dbg_clka_ck: dbg_clka_ck {
dbg_clka_ck: dbg_clka_ck@414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@ -593,7 +593,7 @@
reg = <0x0414>;
};
stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@ -601,7 +601,7 @@
reg = <0x0414>;
};
trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@ -609,7 +609,7 @@
reg = <0x0414>;
};
stm_clk_div_ck: stm_clk_div_ck {
stm_clk_div_ck: stm_clk_div_ck@414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&stm_pmd_clock_mux_ck>;
@ -619,7 +619,7 @@
ti,index-power-of-two;
};
trace_clk_div_ck: trace_clk_div_ck {
trace_clk_div_ck: trace_clk_div_ck@414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&trace_pmd_clk_mux_ck>;
@ -629,7 +629,7 @@
ti,index-power-of-two;
};
clkout2_ck: clkout2_ck {
clkout2_ck: clkout2_ck@700 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout2_div_ck>;

13
sys/gnu/dts/arm/am33xx.dtsi
View File

@ -439,6 +439,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
};
@ -687,7 +688,7 @@
status = "disabled";
};
ehrpwm0: ehrpwm@48300200 {
ehrpwm0: pwm@48300200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
@ -717,7 +718,7 @@
status = "disabled";
};
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
@ -747,7 +748,7 @@
status = "disabled";
};
ehrpwm2: ehrpwm@48304200 {
ehrpwm2: pwm@48304200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
@ -859,12 +860,16 @@
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
dmas = <&edma 52>;
dmas = <&edma 52 0>;
dma-names = "rxtx";
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};

20
sys/gnu/dts/arm/am35xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
emac_ick: emac_ick {
emac_ick: emac_ick@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -16,7 +16,7 @@
ti,bit-shift = <1>;
};
emac_fck: emac_fck {
emac_fck: emac_fck@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&rmii_ck>;
@ -24,7 +24,7 @@
ti,bit-shift = <9>;
};
vpfe_ick: vpfe_ick {
vpfe_ick: vpfe_ick@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -32,7 +32,7 @@
ti,bit-shift = <2>;
};
vpfe_fck: vpfe_fck {
vpfe_fck: vpfe_fck@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&pclk_ck>;
@ -40,7 +40,7 @@
ti,bit-shift = <10>;
};
hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -48,7 +48,7 @@
ti,bit-shift = <0>;
};
hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_ck>;
@ -56,7 +56,7 @@
ti,bit-shift = <8>;
};
hecc_ck: hecc_ck {
hecc_ck: hecc_ck@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&sys_ck>;
@ -65,7 +65,7 @@
};
};
&cm_clocks {
ipss_ick: ipss_ick {
ipss_ick: ipss_ick@a10 {
#clock-cells = <0>;
compatible = "ti,am35xx-interface-clock";
clocks = <&core_l3_ick>;
@ -85,7 +85,7 @@
clock-frequency = <27000000>;
};
uart4_ick_am35xx: uart4_ick_am35xx {
uart4_ick_am35xx: uart4_ick_am35xx@a10 {
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clocks = <&core_l4_ick>;
@ -93,7 +93,7 @@
ti,bit-shift = <23>;
};
uart4_fck_am35xx: uart4_fck_am35xx {
uart4_fck_am35xx: uart4_fck_am35xx@a00 {
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clocks = <&core_48m_fck>;

41
sys/gnu/dts/arm/am4372.dtsi
View File

@ -73,7 +73,7 @@
global_timer: timer@48240200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x48240200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
@ -81,7 +81,7 @@
local_timer: timer@48240600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x48240600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gic>;
clocks = <&mpu_periphclk>;
};
@ -207,7 +207,7 @@
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
<&edma_tptc2 0>;
ti,edma-memcpy-channels = <32 33>;
ti,edma-memcpy-channels = <58 59>;
};
edma_tptc0: tptc@49800000 {
@ -290,6 +290,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
ti,mbox-send-noirq;
ti,mbox-tx = <0 0 0>;
ti,mbox-rx = <0 0 3>;
};
@ -678,7 +679,7 @@
status = "disabled";
};
ehrpwm0: ehrpwm@48300200 {
ehrpwm0: pwm@48300200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
@ -704,7 +705,7 @@
status = "disabled";
};
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
@ -730,7 +731,7 @@
status = "disabled";
};
ehrpwm2: ehrpwm@48304200 {
ehrpwm2: pwm@48304200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
@ -748,7 +749,7 @@
ti,hwmods = "epwmss3";
status = "disabled";
ehrpwm3: ehrpwm@48306200 {
ehrpwm3: pwm@48306200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
@ -766,7 +767,7 @@
ti,hwmods = "epwmss4";
status = "disabled";
ehrpwm4: ehrpwm@48308200 {
ehrpwm4: pwm@48308200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
@ -784,7 +785,7 @@
ti,hwmods = "epwmss5";
status = "disabled";
ehrpwm5: ehrpwm@4830a200 {
ehrpwm5: pwm@4830a200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
@ -883,7 +884,7 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
dmas = <&edma 52>;
dmas = <&edma 52 0>;
dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
@ -893,21 +894,13 @@
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
am43xx_control_usb2phy1: control-phy@44e10620 {
compatible = "ti,control-phy-usb2-am437";
reg = <0x44e10620 0x4>;
reg-names = "power";
};
am43xx_control_usb2phy2: control-phy@0x44e10628 {
compatible = "ti,control-phy-usb2-am437";
reg = <0x44e10628 0x4>;
reg-names = "power";
};
ocp2scp0: ocp2scp@483a8000 {
compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
@ -918,7 +911,7 @@
usb2_phy1: phy@483a8000 {
compatible = "ti,am437x-usb2";
reg = <0x483a8000 0x8000>;
ctrl-module = <&am43xx_control_usb2phy1>;
syscon-phy-power = <&scm_conf 0x620>;
clocks = <&usb_phy0_always_on_clk32k>,
<&usb_otg_ss0_refclk960m>;
clock-names = "wkupclk", "refclk";
@ -937,7 +930,7 @@
usb2_phy2: phy@483e8000 {
compatible = "ti,am437x-usb2";
reg = <0x483e8000 0x8000>;
ctrl-module = <&am43xx_control_usb2phy2>;
syscon-phy-power = <&scm_conf 0x628>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk", "refclk";

11
sys/gnu/dts/arm/am437x-cm-t43.dts
View File

@ -146,7 +146,11 @@
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x1000000>;
nand@0,0 {
reg = <0 0 0>;
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
@ -166,17 +170,12 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,wait-pin = <0>;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table */

15
sys/gnu/dts/arm/am437x-gp-evm.dts
View File

@ -119,7 +119,7 @@
clock-frequency = <32768>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-GP-EVM";
simple-audio-card,widgets =
@ -590,8 +590,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
@ -599,7 +597,7 @@
* 0x264 represents the offset of padconf register of
* gpio3_22 from am43xx_pinmux base.
*/
interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
<&am43xx_pinmux 0x264>;
interrupt-names = "tsc", "wakeup";
@ -812,9 +810,14 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
@ -833,11 +836,9 @@
gpmc,access-ns = <30>;
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,wait-pin = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */

2
sys/gnu/dts/arm/am437x-sk-evm.dts
View File

@ -418,7 +418,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <400000>;
clock-frequency = <100000>;
tps@24 {
compatible = "ti,tps65218";

20
sys/gnu/dts/arm/am43x-epos-evm.dts
View File

@ -18,7 +18,7 @@
/ {
model = "TI AM43x EPOS EVM";
compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
aliases {
display0 = &lcd0;
@ -107,7 +107,7 @@
default-brightness-level = <8>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM43-EPOS-EVM";
simple-audio-card,widgets =
@ -491,7 +491,7 @@
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
interrupt-parent = <&gpio1>;
interrupts = <17 0>;
interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@ -561,9 +561,14 @@
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
@ -582,11 +587,9 @@
gpmc,access-ns = <30>; /* tCEA + 4*/
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,wait-pin = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
@ -792,3 +795,8 @@
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&synctimer_32kclk {
assigned-clocks = <&mux_synctimer32k_ck>;
assigned-clock-parents = <&clkdiv32k_ick>;
};

170
sys/gnu/dts/arm/am43xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
sys_clkin_ck: sys_clkin_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
@ -16,7 +16,7 @@
reg = <0x0040>;
};
crystal_freq_sel_ck: crystal_freq_sel_ck {
crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@ -104,7 +104,7 @@
clock-div = <1>;
};
ehrpwm0_tbclk: ehrpwm0_tbclk {
ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -112,7 +112,7 @@
reg = <0x0664>;
};
ehrpwm1_tbclk: ehrpwm1_tbclk {
ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -120,7 +120,7 @@
reg = <0x0664>;
};
ehrpwm2_tbclk: ehrpwm2_tbclk {
ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -128,7 +128,7 @@
reg = <0x0664>;
};
ehrpwm3_tbclk: ehrpwm3_tbclk {
ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -136,7 +136,7 @@
reg = <0x0664>;
};
ehrpwm4_tbclk: ehrpwm4_tbclk {
ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -144,7 +144,7 @@
reg = <0x0664>;
};
ehrpwm5_tbclk: ehrpwm5_tbclk {
ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -195,7 +195,7 @@
clock-frequency = <26000000>;
};
dpll_core_ck: dpll_core_ck {
dpll_core_ck: dpll_core_ck@2d20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@ -208,7 +208,7 @@
clocks = <&dpll_core_ck>;
};
dpll_core_m4_ck: dpll_core_m4_ck {
dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -219,7 +219,7 @@
ti,invert-autoidle-bit;
};
dpll_core_m5_ck: dpll_core_m5_ck {
dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -230,7 +230,7 @@
ti,invert-autoidle-bit;
};
dpll_core_m6_ck: dpll_core_m6_ck {
dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -241,14 +241,14 @@
ti,invert-autoidle-bit;
};
dpll_mpu_ck: dpll_mpu_ck {
dpll_mpu_ck: dpll_mpu_ck@2d60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2d60>, <0x2d64>, <0x2d6c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck {
dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_mpu_ck>;
@ -267,14 +267,14 @@
clock-div = <2>;
};
dpll_ddr_ck: dpll_ddr_ck {
dpll_ddr_ck: dpll_ddr_ck@2da0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2da0>, <0x2da4>, <0x2dac>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck {
dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_ck>;
@ -285,14 +285,14 @@
ti,invert-autoidle-bit;
};
dpll_disp_ck: dpll_disp_ck {
dpll_disp_ck: dpll_disp_ck@2e20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e20>, <0x2e24>, <0x2e2c>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck {
dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_disp_ck>;
@ -304,14 +304,14 @@
ti,set-rate-parent;
};
dpll_per_ck: dpll_per_ck {
dpll_per_ck: dpll_per_ck@2de0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2de0>, <0x2de4>, <0x2dec>;
};
dpll_per_m2_ck: dpll_per_m2_ck {
dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_per_ck>;
@ -354,7 +354,7 @@
clock-div = <732>;
};
clkdiv32k_ick: clkdiv32k_ick {
clkdiv32k_ick: clkdiv32k_ick@2a38 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ck>;
@ -370,7 +370,7 @@
clock-div = <1>;
};
pruss_ocp_gclk: pruss_ocp_gclk {
pruss_ocp_gclk: pruss_ocp_gclk@4248 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
@ -383,56 +383,56 @@
clock-frequency = <32768>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@4200 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4200>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@4204 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4204>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@4208 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4208>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@420c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x420c>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@4210 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4210>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@4214 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4214>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@4218 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4218>;
};
wdt1_fck: wdt1_fck {
wdt1_fck: wdt1_fck@422c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@ -487,14 +487,14 @@
clock-div = <2>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
reg = <0x4238>;
};
dpll_clksel_mac_clk: dpll_clksel_mac_clk {
dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_m5_ck>;
@ -509,14 +509,14 @@
clock-frequency = <32768>;
};
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
reg = <0x4240>;
};
gpio0_dbclk: gpio0_dbclk {
gpio0_dbclk: gpio0_dbclk@2b68 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&gpio0_dbclk_mux_ck>;
@ -524,7 +524,7 @@
reg = <0x2b68>;
};
gpio1_dbclk: gpio1_dbclk {
gpio1_dbclk: gpio1_dbclk@8c78 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -532,7 +532,7 @@
reg = <0x8c78>;
};
gpio2_dbclk: gpio2_dbclk {
gpio2_dbclk: gpio2_dbclk@8c80 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -540,7 +540,7 @@
reg = <0x8c80>;
};
gpio3_dbclk: gpio3_dbclk {
gpio3_dbclk: gpio3_dbclk@8c88 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -548,7 +548,7 @@
reg = <0x8c88>;
};
gpio4_dbclk: gpio4_dbclk {
gpio4_dbclk: gpio4_dbclk@8c90 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -556,7 +556,7 @@
reg = <0x8c90>;
};
gpio5_dbclk: gpio5_dbclk {
gpio5_dbclk: gpio5_dbclk@8c98 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -572,7 +572,7 @@
clock-div = <2>;
};
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
@ -580,7 +580,7 @@
reg = <0x423c>;
};
gfx_fck_div_ck: gfx_fck_div_ck {
gfx_fck_div_ck: gfx_fck_div_ck@423c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&gfx_fclk_clksel_ck>;
@ -588,7 +588,7 @@
ti,max-div = <2>;
};
disp_clk: disp_clk {
disp_clk: disp_clk@4244 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@ -596,14 +596,14 @@
ti,set-rate-parent;
};
dpll_extdev_ck: dpll_extdev_ck {
dpll_extdev_ck: dpll_extdev_ck@2e60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e60>, <0x2e64>, <0x2e6c>;
};
dpll_extdev_m2_ck: dpll_extdev_m2_ck {
dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_extdev_ck>;
@ -614,14 +614,14 @@
ti,invert-autoidle-bit;
};
mux_synctimer32k_ck: mux_synctimer32k_ck {
mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
reg = <0x4230>;
};
synctimer_32kclk: synctimer_32kclk {
synctimer_32kclk: synctimer_32kclk@2a30 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&mux_synctimer32k_ck>;
@ -629,28 +629,28 @@
reg = <0x2a30>;
};
timer8_fck: timer8_fck {
timer8_fck: timer8_fck@421c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x421c>;
};
timer9_fck: timer9_fck {
timer9_fck: timer9_fck@4220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4220>;
};
timer10_fck: timer10_fck {
timer10_fck: timer10_fck@4224 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4224>;
};
timer11_fck: timer11_fck {
timer11_fck: timer11_fck@4228 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
@ -679,7 +679,7 @@
clocks = <&dpll_ddr_ck>;
};
dpll_ddr_m4_ck: dpll_ddr_m4_ck {
dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_x2_ck>;
@ -690,7 +690,7 @@
ti,invert-autoidle-bit;
};
dpll_per_clkdcoldo: dpll_per_clkdcoldo {
dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&dpll_per_ck>;
@ -701,7 +701,7 @@
ti,invert-autoidle-bit;
};
dll_aging_clk_div: dll_aging_clk_div {
dll_aging_clk_div: dll_aging_clk_div@4250 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sys_clkin_ck>;
@ -733,14 +733,14 @@
clock-div = <2>;
};
usbphy_32khz_clkmux: usbphy_32khz_clkmux {
usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4260>;
};
usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&usbphy_32khz_clkmux>;
@ -748,7 +748,7 @@
reg = <0x2a40>;
};
usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&usbphy_32khz_clkmux>;
@ -756,7 +756,7 @@
reg = <0x2a48>;
};
usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_clkdcoldo>;
@ -764,11 +764,65 @@
reg = <0x8a60>;
};
usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_clkdcoldo>;
ti,bit-shift = <8>;
reg = <0x8a68>;
};
clkout1_osc_div_ck: clkout1_osc_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sys_clkin_ck>;
ti,bit-shift = <20>;
ti,max-div = <4>;
reg = <0x4100>;
};
clkout1_src2_mux_ck: clkout1_src2_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
<&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
<&dpll_mpu_m2_ck>;
reg = <0x4100>;
};
clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_mux_ck>;
ti,bit-shift = <4>;
ti,max-div = <8>;
reg = <0x4100>;
};
clkout1_src2_post_div_ck: clkout1_src2_post_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_pre_div_ck>;
ti,bit-shift = <8>;
ti,max-div = <32>;
ti,index-power-of-two;
reg = <0x4100>;
};
clkout1_mux_ck: clkout1_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
<&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
ti,bit-shift = <16>;
reg = <0x4100>;
};
clkout1_ck: clkout1_ck {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout1_mux_ck>;
ti,bit-shift = <23>;
reg = <0x4100>;
};
};

41
sys/gnu/dts/arm/am57xx-beagle-x15.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@ -24,7 +25,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x80000000>;
reg = <0x0 0x80000000 0x0 0x80000000>;
};
vdd_3v3: fixedregulator-vdd_3v3 {
@ -99,13 +100,6 @@
#cooling-cells = <2>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb1_pins>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
@ -151,7 +145,7 @@
};
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "BeagleBoard-X15";
simple-audio-card,widgets =
@ -347,12 +341,6 @@
>;
};
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
@ -438,7 +426,7 @@
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
@ -447,7 +435,7 @@
/* VDD_CORE */
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1030000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
@ -560,8 +548,7 @@
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
ti,enable-id-detection;
id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
};
@ -583,6 +570,9 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&clkout2_pins_default>;
pinctrl-1 = <&clkout2_pins_sleep>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
status = "okay";
adc-settle-ms = <40>;
@ -591,6 +581,11 @@
DRVDD-supply = <&vdd_3v3>;
DVDD-supply = <&aic_dvdd>;
};
eeprom: eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
};
&i2c3 {
@ -700,10 +695,6 @@
pinctrl-0 = <&usb1_pins>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
@ -796,6 +787,8 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
@ -804,6 +797,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {

18
sys/gnu/dts/arm/am57xx-cl-som-am57x.dts
View File

@ -21,7 +21,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
};
leds {
@ -51,7 +51,7 @@
regulator-max-microvolt = <3300000>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
simple-audio-card,format = "i2s";
@ -167,7 +167,7 @@
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
@ -492,14 +492,14 @@
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <20000000>;
spi-max-frequency = <48000000>;
spi_flash: spi_flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>; /* CS0 */
spi-max-frequency = <20000000>;
spi-max-frequency = <48000000>;
partition@0 {
label = "uboot";
@ -545,7 +545,7 @@
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
linux,wakeup;
wakeup-source;
};
};
@ -559,13 +559,13 @@
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii";
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
@ -588,7 +588,7 @@
};
&usb2 {
dr_mode = "peripheral";
dr_mode = "host";
};
&mcasp3 {

8
sys/gnu/dts/arm/am57xx-sbc-am57x.dts
View File

@ -25,8 +25,8 @@
&dra7_pmx_core {
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>;
};
@ -108,9 +108,9 @@
pinctrl-0 = <&i2c5_pins_default>;
clock-frequency = <400000>;
eeprom_base: atmel@50 {
eeprom_base: atmel@54 {
compatible = "atmel,24c08";
reg = <0x50>;
reg = <0x54>;
pagesize = <16>;
};

158
sys/gnu/dts/arm/arm-realview-pb1176.dts
View File

@ -53,6 +53,14 @@
regulator-boot-on;
};
veth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -106,6 +114,53 @@
clock-frequency = <0>;
};
flash@30000000 {
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x30000000 0x4000000>;
bank-width = <4>;
};
fpga_flash@38000000 {
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x38000000 0x800000>;
bank-width = <4>;
};
/*
* The "secure flash" contains things like the boot
* monitor so we don't want people to accidentally
* screw this up. Mark the device tree node disabled
* by default.
*/
secflash@3c000000 {
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x3c000000 0x4000000>;
bank-width = <4>;
status = "disabled";
};
/* SMSC 9118 ethernet with PHY and EEPROM */
ethernet@3a000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x3a000000 0x10000>;
interrupt-parent = <&intc_fpga1176>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&veth>;
vddvario-supply = <&veth>;
};
usb@3b000000 {
compatible = "nxp,usb-isp1761";
reg = <0x3b000000 0x20000>;
interrupt-parent = <&intc_fpga1176>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
port1-otg;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
@ -176,6 +231,41 @@
label = "versatile:7";
default-state = "off";
};
oscclk0: osc0@0c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x0C>;
clocks = <&xtal24mhz>;
};
oscclk1: osc1@10 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x10>;
clocks = <&xtal24mhz>;
};
oscclk2: osc2@14 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x14>;
clocks = <&xtal24mhz>;
};
oscclk3: osc3@18 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x18>;
clocks = <&xtal24mhz>;
};
oscclk4: osc4@1c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x1c>;
clocks = <&xtal24mhz>;
};
};
/* Primary DevChip GIC synthesized with the CPU */
@ -297,6 +387,53 @@
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
/* Direct-mapped development chip ROM */
pb1176_rom@10200000 {
compatible = "direct-mapped";
reg = <0x10200000 0x4000>;
bank-width = <1>;
};
clcd@10112000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10112000 0x1000>;
interrupt-parent = <&intc_dc1176>;
interrupt-names = "combined";
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&oscclk0>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
port {
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
/* These peripherals are inside the FPGA rather than the DevChip */
@ -306,6 +443,27 @@
compatible = "simple-bus";
ranges;
i2c0: i2c@10002000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,versatile-i2c";
reg = <0x10002000 0x1000>;
rtc@68 {
compatible = "dallas,ds1338";
reg = <0x68>;
};
};
fpga_aaci: aaci@10004000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x10004000 0x1000>;
interrupt-parent = <&intc_fpga1176>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
fpga_mci: mmcsd@10005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x10005000 0x1000>;

23
sys/gnu/dts/arm/arm-realview-pb11mp.dts
View File

@ -230,14 +230,14 @@
flash0@40000000 {
/* 2 * 32MiB NOR Flash memory */
compatible = "arm,vexpress-flash", "cfi-flash";
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
};
flash1@44000000 {
// 2 * 32MiB NOR Flash memory
compatible = "arm,vexpress-flash", "cfi-flash";
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
};
@ -627,16 +627,17 @@
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <63500127>;
hactive = <1024>;
hback-porch = <152>;
hfront-porch = <48>;
hsync-len = <104>;
vactive = <768>;
vback-porch = <23>;
vfront-porch = <3>;
vsync-len = <4>;
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};

27
sys/gnu/dts/arm/armada-370-db.dts
View File

@ -168,6 +168,33 @@
spi-max-frequency = <50000000>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition@800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
};
pcie-controller {

2
sys/gnu/dts/arm/armada-370-mirabox.dts
View File

@ -200,7 +200,7 @@
&pinctrl {
pwr_led_pin: pwr-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
marvell,function = "gpio";
};
stat_led_pins: stat-led-pins {

2
sys/gnu/dts/arm/armada-370-netgear-rn104.dts
View File

@ -297,7 +297,7 @@
backup_led_pin: backup-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
marvell,function = "gpio";
};
power_led_pin: power-led-pin {

2
sys/gnu/dts/arm/armada-370-synology-ds213j.dts
View File

@ -339,7 +339,7 @@
fan_ctrl_high_pin: fan-ctrl-high-pin {
marvell,pins = "mpp63";
marvell,function = "gpo";
marvell,function = "gpio";
};
fan_alarm_pin: fan-alarm-pin {

2
sys/gnu/dts/arm/armada-375.dtsi
View File

@ -529,7 +529,7 @@
};
sata@a0000 {
compatible = "marvell,orion-sata";
compatible = "marvell,armada-370-sata";
reg = <0xa0000 0x5000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 14>, <&gateclk 20>;

23
sys/gnu/dts/arm/armada-385-db-ap.dts
View File

@ -61,7 +61,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi1: spi@10680 {
@ -134,18 +135,27 @@
};
};
/* CON3 */
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <1>;
bm,pool-short = <3>;
};
/* CON2 */
ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
};
/* CON4 */
ethernet@70000 {
pinctrl-names = "default";
@ -157,6 +167,13 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <3>;
};
bm@c8000 {
status = "okay";
};
nfc: flash@d0000 {
@ -178,6 +195,10 @@
};
};
bm-bppi {
status = "okay";
};
pcie-controller {
status = "okay";

12
sys/gnu/dts/arm/armada-385-linksys.dtsi
View File

@ -58,8 +58,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
@ -117,7 +117,7 @@
};
/* USB part of the eSATA/USB 2.0 port */
usb@50000 {
usb@58000 {
status = "okay";
};
@ -245,7 +245,7 @@
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@ -260,7 +260,7 @@
};
sata {
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
@ -313,7 +313,7 @@
&pinctrl {
keys_pin: keys-pin {
marvell,pins = "mpp24", "mpp47";
marvell,pins = "mpp24", "mpp29";
marvell,function = "gpio";
};

6
sys/gnu/dts/arm/armada-388-clearfog.dts
View File

@ -78,6 +78,9 @@
internal-regs {
ethernet@30000 {
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <1>;
status = "okay";
fixed-link {
@ -88,6 +91,9 @@
ethernet@34000 {
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
bm,pool-short = <1>;
status = "okay";
fixed-link {

17
sys/gnu/dts/arm/armada-388-db.dts
View File

@ -66,7 +66,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@ -99,6 +100,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
};
usb@58000 {
@ -109,6 +113,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
};
mdio@72004 {
@ -129,6 +136,10 @@
status = "okay";
};
bm@c8000 {
status = "okay";
};
flash@d0000 {
status = "okay";
num-cs = <1>;
@ -169,6 +180,10 @@
};
};
bm-bppi {
status = "okay";
};
pcie-controller {
status = "okay";
/*

53
sys/gnu/dts/arm/armada-388-gp.dts
View File

@ -44,8 +44,8 @@
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell Armada 385 GP";
compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
model = "Marvell Armada 388 DB-88F6820-GP";
compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
chosen {
stdout-path = "serial0:115200n8";
@ -60,7 +60,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
@ -133,6 +134,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
};
/* CON4 */
@ -152,6 +156,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
};
@ -186,6 +193,10 @@
};
};
bm@c8000 {
status = "okay";
};
sata@e0000 {
pinctrl-names = "default";
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@ -229,17 +240,21 @@
/* CON5 */
usb3@f0000 {
vcc-supply = <&reg_usb2_1_vbus>;
usb-phy = <&usb2_1_phy>;
status = "okay";
};
/* CON7 */
usb3@f8000 {
vcc-supply = <&reg_usb3_vbus>;
usb-phy = <&usb3_phy>;
status = "okay";
};
};
bm-bppi {
status = "okay";
};
pcie-controller {
status = "okay";
/*
@ -273,13 +288,22 @@
};
};
usb2_1_phy: usb2_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb2_1_vbus>;
};
usb3_phy: usb3_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_vbus>;
};
reg_usb3_vbus: usb3-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
};
@ -299,7 +323,6 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
};
@ -309,7 +332,7 @@
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
};
@ -318,7 +341,6 @@
regulator-name = "v5.0-sata0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&reg_sata0>;
};
@ -327,7 +349,6 @@
regulator-name = "v12.0-sata0";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
vin-supply = <&reg_sata0>;
};
@ -337,7 +358,7 @@
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
};
@ -346,7 +367,6 @@
regulator-name = "v5.0-sata1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&reg_sata1>;
};
@ -355,7 +375,6 @@
regulator-name = "v12.0-sata1";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
vin-supply = <&reg_sata1>;
};
@ -363,7 +382,7 @@
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata2";
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
};
@ -372,7 +391,6 @@
regulator-name = "v5.0-sata2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&reg_sata2>;
};
@ -381,7 +399,6 @@
regulator-name = "v12.0-sata2";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
vin-supply = <&reg_sata2>;
};
@ -389,7 +406,7 @@
compatible = "regulator-fixed";
regulator-name = "pwr_en_sata3";
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
};
@ -398,7 +415,6 @@
regulator-name = "v5.0-sata3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&reg_sata3>;
};
@ -407,7 +423,6 @@
regulator-name = "v12.0-sata3";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
vin-supply = <&reg_sata3>;
};
};

15
sys/gnu/dts/arm/armada-38x-solidrun-microsom.dtsi
View File

@ -58,7 +58,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
ethernet@70000 {
@ -66,6 +67,9 @@
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
status = "okay";
};
@ -110,6 +114,15 @@
pinctrl-names = "default";
status = "okay";
};
bm@c8000 {
status = "okay";
};
};
bm-bppi {
status = "okay";
};
};
};

49
sys/gnu/dts/arm/armada-38x.dtsi
View File

@ -429,6 +429,27 @@
reg = <0x22000 0x1000>;
};
/*
* As a special exception to the "order by
* register address" rule, the eth0 node is
* placed here to ensure that it gets
* registered as the first interface, since
* the network subsystem doesn't allow naming
* interfaces using DT aliases. Without this,
* the ordering of interfaces is different
* from the one used in U-Boot and the
* labeling of interfaces on the boards, which
* is very confusing for users.
*/
eth0: ethernet@70000 {
compatible = "marvell,armada-370-neta";
reg = <0x70000 0x4000>;
interrupts-extended = <&mpic 8>;
clocks = <&gateclk 4>;
tx-csum-limit = <9800>;
status = "disabled";
};
eth1: ethernet@30000 {
compatible = "marvell,armada-370-neta";
reg = <0x30000 0x4000>;
@ -493,15 +514,6 @@
};
};
eth0: ethernet@70000 {
compatible = "marvell,armada-370-neta";
reg = <0x70000 0x4000>;
interrupts-extended = <&mpic 8>;
clocks = <&gateclk 4>;
tx-csum-limit = <9800>;
status = "disabled";
};
mdio: mdio@72004 {
#address-cells = <1>;
#size-cells = <0>;
@ -540,6 +552,14 @@
status = "disabled";
};
bm: bm@c8000 {
compatible = "marvell,armada-380-neta-bm";
reg = <0xc8000 0xac>;
clocks = <&gateclk 13>;
internal-mem = <&bm_bppi>;
status = "disabled";
};
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@ -618,6 +638,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
};
bm_bppi: bm-bppi {
compatible = "mmio-sram";
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gateclk 13>;
no-memory-wc;
status = "disabled";
};
};
clocks {

4
sys/gnu/dts/arm/armada-xp-axpwifiap.dts
View File

@ -70,8 +70,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
pcie-controller {
status = "okay";

49
sys/gnu/dts/arm/armada-xp-db.dts
View File

@ -76,8 +76,9 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@ -181,21 +182,33 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
};
bm@c0000 {
status = "okay";
};
mvsdio@d4000 {
@ -229,6 +242,38 @@
spi-max-frequency = <20000000>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition@800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
};
bm-bppi {
status = "okay";
};
};
};

21
sys/gnu/dts/arm/armada-xp-gp.dts
View File

@ -95,8 +95,9 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
devbus-bootcs {
status = "okay";
@ -196,21 +197,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "qsgmii";
buffer-manager = <&bm>;
bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "qsgmii";
buffer-manager = <&bm>;
bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "qsgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "qsgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
};
/* Front-side USB slot */
@ -235,6 +244,10 @@
};
};
bm@c0000 {
status = "okay";
};
nand@d0000 {
status = "okay";
num-cs = <1>;
@ -243,5 +256,9 @@
nand-on-flash-bbt;
};
};
bm-bppi {
status = "okay";
};
};
};

5
sys/gnu/dts/arm/armada-xp-lenovo-ix4-300d.dts
View File

@ -65,8 +65,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
pcie-controller {
status = "okay";
@ -152,6 +152,7 @@
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

8
sys/gnu/dts/arm/armada-xp-linksys-mamba.dts
View File

@ -70,8 +70,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
pcie-controller {
status = "okay";
@ -304,13 +304,13 @@
button@1 {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};

4
sys/gnu/dts/arm/armada-xp-matrix.dts
View File

@ -68,8 +68,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
internal-regs {
serial@12000 {

4
sys/gnu/dts/arm/armada-xp-netgear-rn2120.dts
View File

@ -64,8 +64,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
pcie-controller {
status = "okay";

23
sys/gnu/dts/arm/armada-xp-openblocks-ax3-4.dts
View File

@ -65,9 +65,10 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
devbus-bootcs {
status = "okay";
@ -176,21 +177,29 @@
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <0>;
};
ethernet@74000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <1>;
};
ethernet@30000 {
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
};
ethernet@34000 {
status = "okay";
phy = <&phy3>;
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
};
i2c@11000 {
status = "okay";
@ -219,6 +228,14 @@
usb@51000 {
status = "okay";
};
bm@c0000 {
status = "okay";
};
};
bm-bppi {
status = "okay";
};
};
};

4
sys/gnu/dts/arm/armada-xp-synology-ds414.dts
View File

@ -78,8 +78,8 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
pcie-controller {
status = "okay";

19
sys/gnu/dts/arm/armada-xp.dtsi
View File

@ -253,6 +253,14 @@
marvell,crypto-sram-size = <0x800>;
};
bm: bm@c0000 {
compatible = "marvell,armada-380-neta-bm";
reg = <0xc0000 0xac>;
clocks = <&gateclk 13>;
internal-mem = <&bm_bppi>;
status = "disabled";
};
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
@ -291,6 +299,17 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
bm_bppi: bm-bppi {
compatible = "mmio-sram";
reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&gateclk 13>;
no-memory-wc;
status = "disabled";
};
};
clocks {

2
sys/gnu/dts/arm/armv7-m.dtsi
View File

@ -1,7 +1,7 @@
#include "skeleton.dtsi"
/ {
nvic: nv-interrupt-controller {
nvic: interrupt-controller@e000e100 {
compatible = "arm,armv7m-nvic";
interrupt-controller;
#interrupt-cells = <1>;

113
sys/gnu/dts/arm/at91-sama5d2_xplained.dts
View File

@ -46,6 +46,7 @@
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@ -71,11 +72,20 @@
ahb {
usb0: gadget@00300000 {
atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
&pioA 42 GPIO_ACTIVE_HIGH
0
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
@ -114,9 +124,15 @@
macb0: ethernet@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>;
pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioA>;
interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
};
};
pdmic@f8018000 {
@ -218,6 +234,15 @@
};
};
shdwc@f8048010 {
atmel,shdwc-debouncer = <976>;
input@0 {
reg = <0>;
atmel,wakeup-type = "low";
};
};
watchdog@f8048040 {
status = "okay";
};
@ -261,7 +286,29 @@
};
};
adc: adc@fc030000 {
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc_default>;
status = "okay";
};
pinctrl@fc038000 {
/*
* There is no real pinmux for ADC, if the pin
* is not requested by another peripheral then
* the muxing is done when channel is enabled.
* Requesting pins for ADC is GPIO is
* encouraged to prevent conflicts and to
* disable bias in order to be in the same
* state when the pin is not muxed to the adc.
*/
pinctrl_adc_default: adc_default {
pinmux = <PIN_PD23__GPIO>;
bias-disable;
};
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
<PIN_PB29__FLEXCOM0_IO1>;
@ -286,6 +333,18 @@
bias-disable;
};
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PB9__GPIO>;
bias-pull-up;
};
pinctrl_led_gpio_default: led_gpio_default {
pinmux = <PIN_PB0__GPIO>,
<PIN_PB5__GPIO>,
<PIN_PB6__GPIO>;
bias-pull-up;
};
pinctrl_macb0_default: macb0_default {
pinmux = <PIN_PB14__GTXCK>,
<PIN_PB15__GTXEN>,
@ -300,6 +359,11 @@
bias-disable;
};
pinctrl_macb0_phy_irq: macb0_phy_irq {
pinmux = <PIN_PC9__GPIO>;
bias-disable;
};
pinctrl_pdmic_default: pdmic_default {
pinmux = <PIN_PB26__PDMIC_DAT>,
<PIN_PB27__PDMIC_CLK>;
@ -365,7 +429,54 @@
<PIN_PB12__UTXD3>;
bias-disable;
};
pinctrl_usb_default: usb_default {
pinmux = <PIN_PB10__GPIO>;
bias-disable;
};
pinctrl_usba_vbus: usba_vbus {
pinmux = <PIN_PA31__GPIO>;
bias-disable;
};
};
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
bp1 {
label = "PB_USER";
gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
status = "okay";
red {
label = "red";
gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
};
green {
label = "green";
gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
};
blue {
label = "blue";
gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
};

9
sys/gnu/dts/arm/at91-sama5d4_xplained.dts
View File

@ -86,10 +86,12 @@
macb0: ethernet@f8020000 {
phy-mode = "rmii";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
phy0: ethernet-phy@1 {
interrupt-parent = <&pioE>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <1>;
};
};
@ -152,6 +154,10 @@
atmel,pins =
<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
};
};
};
@ -262,5 +268,6 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
regulator-always-on;
};
};

11
sys/gnu/dts/arm/at91-sama5d4ek.dts
View File

@ -160,8 +160,15 @@
};
macb0: ethernet@f8020000 {
pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
phy-mode = "rmii";
status = "okay";
ethernet-phy@1 {
reg = <0x1>;
interrupt-parent = <&pioE>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
};
};
mmc1: mmc@fc000000 {
@ -193,6 +200,10 @@
pinctrl@fc06a000 {
board {
pinctrl_macb0_phy_irq: macb0_phy_irq {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

4
sys/gnu/dts/arm/at91-vinco.dts
View File

@ -118,7 +118,7 @@
ethernet-phy@1 {
reg = <0x1>;
reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&pioB>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
};
@ -162,7 +162,7 @@
reg = <0x1>;
interrupt-parent = <&pioB>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
};
};

2
sys/gnu/dts/arm/axm55xx.dtsi
View File

@ -107,7 +107,7 @@
};
amba {
compatible = "arm,amba-bus";
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;

9
sys/gnu/dts/arm/bcm-cygnus-clock.dtsi
View File

@ -121,4 +121,13 @@ clocks {
clocks = <&osc>;
clock-output-names = "keypad", "adc/touch", "pwm";
};
audiopll: audiopll {
#clock-cells = <1>;
compatible = "brcm,cygnus-audiopll";
reg = <0x180aeb00 0x68>;
clocks = <&osc>;
clock-output-names = "audiopll", "ch0_audio",
"ch1_audio", "ch2_audio";
};
};

11
sys/gnu/dts/arm/bcm-cygnus.dtsi
View File

@ -351,9 +351,16 @@
<&pinctrl 142 10 1>;
};
touchscreen: tsc@180a6000 {
ts_adc_syscon: ts_adc_syscon@180a6000 {
compatible = "brcm,iproc-ts-adc-syscon", "syscon";
reg = <0x180a6000 0xc30>;
};
touchscreen: touchscreen@180a6000 {
compatible = "brcm,iproc-touchscreen";
reg = <0x180a6000 0x40>;
#address-cells = <1>;
#size-cells = <1>;
ts_syscon = <&ts_adc_syscon>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;

205
sys/gnu/dts/arm/bcm-nsp.dtsi
View File

@ -45,14 +45,14 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
cpu@1 {
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
@ -62,24 +62,19 @@
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
mpcore {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
};
};
a9pll: arm_clk@00000 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
@ -169,6 +164,18 @@
#address-cells = <1>;
#size-cells = <1>;
gpioa: gpio@0020 {
compatible = "brcm,nsp-gpio-a";
reg = <0x0020 0x70>,
<0x3f1c4 0x1c>;
#gpio-cells = <2>;
gpio-controller;
ngpios = <32>;
interrupt-controller;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
uart0: serial@0300 {
compatible = "ns16550a";
reg = <0x0300 0x100>;
@ -185,78 +192,6 @@
status = "disabled";
};
pcie0: pcie@12000 {
compatible = "brcm,iproc-pcie";
reg = <0x12000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
status = "disabled";
};
pcie1: pcie@13000 {
compatible = "brcm,iproc-pcie";
reg = <0x13000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
status = "disabled";
};
pcie2: pcie@14000 {
compatible = "brcm,iproc-pcie";
reg = <0x14000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
status = "disabled";
};
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
@ -271,6 +206,24 @@
brcm,nand-has-wp;
};
ccbtimer0: timer@34000 {
compatible = "arm,sp804";
reg = <0x34000 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
clock-names = "apb_pclk";
};
ccbtimer1: timer@35000 {
compatible = "arm,sp804";
reg = <0x35000 0x1000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
clock-names = "apb_pclk";
};
i2c0: i2c@38000 {
compatible = "brcm,iproc-i2c";
reg = <0x38000 0x50>;
@ -280,6 +233,14 @@
clock-frequency = <100000>;
};
watchdog@39000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x39000 0x1000>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>, <&iprocslow>;
clock-names = "wdogclk", "apb_pclk";
};
lcpll0: lcpll0@3f100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
@ -306,4 +267,76 @@
<0x3f408 0x04>;
};
};
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
status = "disabled";
};
pcie1: pcie@18013000 {
compatible = "brcm,iproc-pcie";
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
status = "disabled";
};
pcie2: pcie@18014000 {
compatible = "brcm,iproc-pcie";
reg = <0x18014000 0x1000>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
/* Note: The HW does not support I/O resources. So,
* only the memory resource range is being specified.
*/
ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
status = "disabled";
};
};

4
sys/gnu/dts/arm/bcm2835-rpi-a-plus.dts
View File

@ -29,3 +29,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
sys/gnu/dts/arm/bcm2835-rpi-b-plus.dts
View File

@ -29,3 +29,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
sys/gnu/dts/arm/bcm2835-rpi-b-rev2.dts
View File

@ -22,3 +22,7 @@
brcm,function = <BCM2835_FSEL_ALT2>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
sys/gnu/dts/arm/bcm2835-rpi-b.dts
View File

@ -16,3 +16,7 @@
&gpio {
pinctrl-0 = <&gpioout &alt0 &alt3>;
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};

25
sys/gnu/dts/arm/bcm2835-rpi.dtsi
View File

@ -1,3 +1,5 @@
#include <dt-bindings/power/raspberrypi-power.h>
/ {
memory {
reg = <0 0x10000000>;
@ -18,6 +20,12 @@
compatible = "raspberrypi,bcm2835-firmware";
mboxes = <&mailbox>;
};
power: power {
compatible = "raspberrypi,bcm2835-power";
firmware = <&firmware>;
#power-domain-cells = <1>;
};
};
};
@ -58,3 +66,20 @@
status = "okay";
bus-width = <4>;
};
&pwm {
status = "okay";
};
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
&v3d {
power-domains = <&power RPI_POWER_DOMAIN_V3D>;
};
&hdmi {
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};

11
sys/gnu/dts/arm/bcm2835.dtsi
View File

@ -3,6 +3,17 @@
/ {
compatible = "brcm,bcm2835";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,arm1176jzf-s";
reg = <0x0>;
};
};
soc {
ranges = <0x7e000000 0x20000000 0x02000000>;
dma-ranges = <0x40000000 0x00000000 0x20000000>;

4
sys/gnu/dts/arm/bcm2836-rpi-2-b.dts
View File

@ -33,3 +33,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

112
sys/gnu/dts/arm/bcm283x.dtsi
View File

@ -1,5 +1,7 @@
#include <dt-bindings/pinctrl/bcm2835.h>
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/* This include file covers the common peripherals and configuration between
@ -46,9 +48,29 @@
<1 24>,
<1 25>,
<1 26>,
/* dma channel 11-14 share one irq */
<1 27>,
<1 27>,
<1 27>,
<1 27>,
/* unused shared irq for all channels */
<1 28>;
interrupt-names = "dma0",
"dma1",
"dma2",
"dma3",
"dma4",
"dma5",
"dma6",
"dma7",
"dma8",
"dma9",
"dma10",
"dma11",
"dma12",
"dma13",
"dma14",
"dma-shared-all";
#dma-cells = <1>;
brcm,dma-channel-mask = <0x7f35>;
};
@ -111,7 +133,7 @@
#interrupt-cells = <2>;
};
uart0: uart@7e201000 {
uart0: serial@7e201000 {
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
@ -152,6 +174,18 @@
status = "disabled";
};
pixelvalve@7e206000 {
compatible = "brcm,bcm2835-pixelvalve0";
reg = <0x7e206000 0x100>;
interrupts = <2 13>; /* pwa0 */
};
pixelvalve@7e207000 {
compatible = "brcm,bcm2835-pixelvalve1";
reg = <0x7e207000 0x100>;
interrupts = <2 14>; /* pwa1 */
};
aux: aux@0x7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
@ -159,6 +193,44 @@
clocks = <&clocks BCM2835_CLOCK_VPU>;
};
uart1: serial@7e215040 {
compatible = "brcm,bcm2835-aux-uart";
reg = <0x7e215040 0x40>;
interrupts = <1 29>;
clocks = <&aux BCM2835_AUX_CLOCK_UART>;
status = "disabled";
};
spi1: spi@7e215080 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e215080 0x40>;
interrupts = <1 29>;
clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@7e2150c0 {
compatible = "brcm,bcm2835-aux-spi";
reg = <0x7e2150c0 0x40>;
interrupts = <1 29>;
clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm: pwm@7e20c000 {
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c000 0x28>;
clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
assigned-clock-rates = <10000000>;
#pwm-cells = <2>;
status = "disabled";
};
sdhci: sdhci@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
@ -167,6 +239,12 @@
status = "disabled";
};
hvs@7e400000 {
compatible = "brcm,bcm2835-hvs";
reg = <0x7e400000 0x6000>;
interrupts = <2 1>;
};
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@ -187,11 +265,39 @@
status = "disabled";
};
usb@7e980000 {
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
interrupts = <2 10>; /* pixelvalve */
};
hdmi: hdmi@7e902000 {
compatible = "brcm,bcm2835-hdmi";
reg = <0x7e902000 0x600>,
<0x7e808000 0x100>;
interrupts = <2 8>, <2 9>;
ddc = <&i2c2>;
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
status = "disabled";
};
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;
};
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
};
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
};
clocks {

10
sys/gnu/dts/arm/bcm4708-buffalo-wzr-1750dhp.dts
View File

@ -17,7 +17,7 @@
model = "Buffalo WZR-1750DHP (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -139,3 +139,11 @@
&uart0 {
status = "okay";
};
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};

6
sys/gnu/dts/arm/bcm4708-luxul-xwc-1000.dts
View File

@ -17,7 +17,7 @@
model = "Luxul XWC-1000 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -59,3 +59,7 @@
&uart0 {
status = "okay";
};
&spi_nor {
status = "okay";
};

17
sys/gnu/dts/arm/bcm4708-netgear-r6250.dts
View File

@ -17,24 +17,13 @@
model = "Netgear R6250 V1 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
axi@18000000 {
usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
@ -97,3 +86,7 @@
&uart0 {
status = "okay";
};
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};

6
sys/gnu/dts/arm/bcm4708-smartrg-sr400ac.dts
View File

@ -17,7 +17,7 @@
model = "SmartRG SR400ac";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -122,3 +122,7 @@
&uart0 {
status = "okay";
};
&spi_nor {
status = "okay";
};

2
sys/gnu/dts/arm/bcm47081-buffalo-wzr-600dhp2.dts
View File

@ -17,7 +17,7 @@
model = "Buffalo WZR-600DHP2 (BCM47081)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {

5
sys/gnu/dts/arm/bcm4709-buffalo-wxr-1900dhp.dts
View File

@ -126,3 +126,8 @@
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};

8
sys/gnu/dts/arm/bcm4709-netgear-r8000.dts
View File

@ -106,3 +106,11 @@
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};

32
sys/gnu/dts/arm/bcm5301x.dtsi
View File

@ -18,6 +18,10 @@
/ {
interrupt-parent = <&gic>;
chosen {
stdout-path = &uart0;
};
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
@ -207,6 +211,34 @@
gpio-controller;
#gpio-cells = <2>;
};
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
};
usb3: usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
};
spi@29000 {
reg = <0x00029000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
spi_nor: spi-nor@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
};
};
};
lcpll0: lcpll0@1800c100 {

8
sys/gnu/dts/arm/cros-adc-thermistors.dtsi
View File

@ -13,28 +13,28 @@
*/
&adc {
ncp15wb473@3 {
thermistor3 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 3>;
};
ncp15wb473@4 {
thermistor4 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
};
ncp15wb473@5 {
thermistor5 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 5>;
};
ncp15wb473@6 {
thermistor6 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;

1
sys/gnu/dts/arm/cros-ec-keyboard.dtsi
View File

@ -55,6 +55,7 @@
MATRIX_KEY(0x03, 0x04, KEY_F5)
MATRIX_KEY(0x03, 0x06, KEY_6)
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
MATRIX_KEY(0x03, 0x09, KEY_F13)
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)

14
sys/gnu/dts/arm/da850-enbw-cmc.dts
View File

@ -16,14 +16,20 @@
compatible = "enbw,cmc", "ti,da850";
model = "EnBW CMC";
soc {
serial0: serial@1c42000 {
soc@1c00000 {
serial0: serial@42000 {
status = "okay";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
status = "okay";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
status = "okay";
};
mdio: mdio@224000 {
status = "okay";
};
eth0: ethernet@220000 {
status = "okay";
};
};

26
sys/gnu/dts/arm/da850-evm.dts
View File

@ -14,8 +14,8 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
soc {
pmx_core: pinmux@1c14120 {
soc@1c00000 {
pmx_core: pinmux@14120 {
status = "okay";
mcasp0_pins: pinmux_mcasp0_pins {
@ -30,19 +30,19 @@
>;
};
};
serial0: serial@1c42000 {
serial0: serial@42000 {
status = "okay";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
status = "okay";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
status = "okay";
};
rtc0: rtc@1c23000 {
rtc0: rtc@23000 {
status = "okay";
};
i2c0: i2c@1c22000 {
i2c0: i2c@22000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
@ -66,17 +66,17 @@
};
};
wdt: wdt@1c21000 {
wdt: wdt@21000 {
status = "okay";
};
mmc0: mmc@1c40000 {
mmc0: mmc@40000 {
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
spi1: spi@1f0e000 {
spi1: spi@30e000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@ -116,18 +116,18 @@
};
};
};
mdio: mdio@1e24000 {
mdio: mdio@224000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
};
eth0: ethernet@1e20000 {
eth0: ethernet@220000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mii_pins>;
};
gpio: gpio@1e26000 {
gpio: gpio@226000 {
status = "okay";
};
};

95
sys/gnu/dts/arm/da850.dtsi
View File

@ -15,15 +15,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller {
intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <100>;
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
};
};
soc {
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
@ -31,7 +31,7 @@
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
pmx_core: pinmux@1c14120 {
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
@ -63,6 +63,12 @@
0x10 0x00002200 0x0000ff00
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,bits = <
/* I2C1_SDA, I2C1_SCL */
0x10 0x00440000 0x00ff0000
>;
};
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@ -114,7 +120,19 @@
0x4 0x00000004 0x0000000f
>;
};
spi1_pins: pinmux_spi_pins {
spi0_pins: pinmux_spi0_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0xc 0x00001101 0x0000ff0f
>;
};
spi0_cs0_pin: pinmux_spi0_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x10 0x00000010 0x000000f0
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0x14 0x00110100 0x00ff0f00
@ -150,7 +168,7 @@
};
};
edma0: edma@01c00000 {
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
@ -161,19 +179,19 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
edma0_tptc0: tptc@01c08000 {
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
edma0_tptc1: tptc@01c08400 {
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
};
edma1: edma@01e30000 {
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
@ -184,41 +202,41 @@
ti,tptcs = <&edma1_tptc0 7>;
};
edma1_tptc0: tptc@01e38000 {
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
serial0: serial@1c42000 {
serial0: serial@42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
rtc0: rtc@1c23000 {
rtc0: rtc@23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
i2c0: i2c@1c22000 {
i2c0: i2c@22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
@ -226,12 +244,20 @@
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@1c21000 {
i2c1: i2c@228000 {
compatible = "ti,davinci-i2c";
reg = <0x228000 0x1000>;
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
mmc0: mmc@1c40000 {
mmc0: mmc@40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
@ -239,7 +265,7 @@
dma-names = "rx", "tx";
status = "disabled";
};
mmc1: mmc@1e1b000 {
mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
@ -247,37 +273,47 @@
dma-names = "rx", "tx";
status = "disabled";
};
ehrpwm0: ehrpwm@01f00000 {
ehrpwm0: pwm@300000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: ehrpwm@01f02000 {
ehrpwm1: pwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@01f06000 {
ecap0: ecap@306000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@01f07000 {
ecap1: ecap@307000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@01f08000 {
ecap2: ecap@308000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
spi1: spi@1f0e000 {
spi0: spi@41000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
status = "disabled";
};
spi1: spi@30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
@ -289,13 +325,14 @@
dma-names = "rx", "tx";
status = "disabled";
};
mdio: mdio@1e24000 {
mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
status = "disabled";
};
eth0: ethernet@1e20000 {
eth0: ethernet@220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
@ -308,10 +345,12 @@
35
36
>;
status = "disabled";
};
gpio: gpio@1e26000 {
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x226000 0x1000>;
interrupts = <42 IRQ_TYPE_EDGE_BOTH
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
@ -323,7 +362,7 @@
status = "disabled";
};
mcasp0: mcasp@01d00000 {
mcasp0: mcasp@100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;

66
sys/gnu/dts/arm/dm8148-evm.dts
View File

@ -6,6 +6,7 @@
/dts-v1/;
#include "dm814x.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "DM8148 EVM";
@ -35,6 +36,67 @@
phy-mode = "rgmii";
};
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name= "micron,mt29f2g16aadwp";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
partition@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
partition@0x1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
partition@0x280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
};
};
&mmc1 {
status = "disabled";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pins>;
@ -43,6 +105,10 @@
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
status = "disabled";
};
&pincntl {
sd1_pins: pinmux_sd1_pins {
pinctrl-single,pins = <

9
sys/gnu/dts/arm/dm8148-t410.dts
View File

@ -45,6 +45,14 @@
phy-mode = "rgmii";
};
&mmc1 {
status = "disabled";
};
&mmc2 {
status = "disabled";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&sd2_pins>;
@ -53,6 +61,7 @@
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
dma-names = "tx", "rx";
non-removable;
};
&pincntl {

257
sys/gnu/dts/arm/dm814x-clocks.dtsi
View File

@ -4,8 +4,159 @@
* published by the Free Software Foundation.
*/
&pllss {
/*
* See TRM "2.6.10 Connected outputso DPLLS" and
* "2.6.11 Connected Outputs of DPLLJ". Only clkout is
* connected except for hdmi and usb.
*/
adpll_mpu_ck: adpll@40 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-s-clock";
reg = <0x40 0x40>;
clocks = <&devosc_ck &devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow", "clkinphif";
clock-output-names = "481c5040.adpll.dcoclkldo",
"481c5040.adpll.clkout",
"481c5040.adpll.clkoutx2",
"481c5040.adpll.clkouthif";
};
adpll_dsp_ck: adpll@80 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x80 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5080.adpll.dcoclkldo",
"481c5080.adpll.clkout",
"481c5080.adpll.clkoutldo";
};
adpll_sgx_ck: adpll@b0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0xb0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c50b0.adpll.dcoclkldo",
"481c50b0.adpll.clkout",
"481c50b0.adpll.clkoutldo";
};
adpll_hdvic_ck: adpll@e0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0xe0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c50e0.adpll.dcoclkldo",
"481c50e0.adpll.clkout",
"481c50e0.adpll.clkoutldo";
};
adpll_l3_ck: adpll@110 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x110 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5110.adpll.dcoclkldo",
"481c5110.adpll.clkout",
"481c5110.adpll.clkoutldo";
};
adpll_isp_ck: adpll@140 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x140 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5140.adpll.dcoclkldo",
"481c5140.adpll.clkout",
"481c5140.adpll.clkoutldo";
};
adpll_dss_ck: adpll@170 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x170 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5170.adpll.dcoclkldo",
"481c5170.adpll.clkout",
"481c5170.adpll.clkoutldo";
};
adpll_video0_ck: adpll@1a0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x1a0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c51a0.adpll.dcoclkldo",
"481c51a0.adpll.clkout",
"481c51a0.adpll.clkoutldo";
};
adpll_video1_ck: adpll@1d0 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x1d0 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c51d0.adpll.dcoclkldo",
"481c51d0.adpll.clkout",
"481c51d0.adpll.clkoutldo";
};
adpll_hdmi_ck: adpll@200 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x200 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5200.adpll.dcoclkldo",
"481c5200.adpll.clkout",
"481c5200.adpll.clkoutldo";
};
adpll_audio_ck: adpll@230 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x230 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5230.adpll.dcoclkldo",
"481c5230.adpll.clkout",
"481c5230.adpll.clkoutldo";
};
adpll_usb_ck: adpll@260 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x260 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5260.adpll.dcoclkldo",
"481c5260.adpll.clkout",
"481c5260.adpll.clkoutldo";
};
adpll_ddr_ck: adpll@290 {
#clock-cells = <1>;
compatible = "ti,dm814-adpll-lj-clock";
reg = <0x290 0x30>;
clocks = <&devosc_ck &devosc_ck>;
clock-names = "clkinp", "clkinpulow";
clock-output-names = "481c5290.adpll.dcoclkldo",
"481c5290.adpll.clkout",
"481c5290.adpll.clkoutldo";
};
};
&pllss_clocks {
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@2e0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@ -14,7 +165,7 @@
reg = <0x2e0>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@2e0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@ -23,7 +174,25 @@
reg = <0x2e0>;
};
sysclk18_ck: sysclk18_ck {
/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&adpll_video0_ck 1
&adpll_video1_ck 1
&adpll_audio_ck 1>;
ti,bit-shift = <1>;
reg = <0x2e8>;
};
/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
sysclk18_ck: sysclk18_ck@2f0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
@ -33,7 +202,7 @@
};
&scm_clocks {
devosc_ck: devosc_ck {
devosc_ck: devosc_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
@ -41,11 +210,11 @@
reg = <0x0040>;
};
/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
auxosc_ck: auxosc_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <27000000>;
clock-frequency = <22572900>;
};
/* Optional 32768Hz crystal or clock on RTCOSC pins */
@ -79,37 +248,6 @@
compatible = "fixed-clock";
clock-frequency = <1000000000>;
};
sysclk4_ck: sysclk4_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <222000000>;
};
sysclk6_ck: sysclk6_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
sysclk10_ck: sysclk10_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <48000000>;
};
cpsw_125mhz_gclk: cpsw_125mhz_gclk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <250000000>;
};
};
&prcm_clocks {
@ -121,7 +259,7 @@
clock-div = <1>;
};
mpu_clksrc_ck: mpu_clksrc_ck {
mpu_clksrc_ck: mpu_clksrc_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&devosc_ck>, <&rtcdivider_ck>;
@ -138,6 +276,49 @@
clock-div = <78125>;
};
/* L4_HS 220 MHz*/
sysclk4_ck: sysclk4_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <1>;
};
/* L4_FWCFG */
sysclk5_ck: sysclk5_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <2>;
};
/* L4_LS 110 MHz */
sysclk6_ck: sysclk6_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_l3_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <2>;
};
sysclk8_ck: sysclk8_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&adpll_usb_ck 1>;
ti,clock-mult = <1>;
ti,clock-div = <1>;
};
sysclk10_ck: sysclk10_ck {
compatible = "ti,divider-clock";
reg = <0x324>;
ti,max-div = <7>;
#clock-cells = <0>;
clocks = <&adpll_usb_ck 1>;
};
aud_clkin0_ck: aud_clkin0_ck {
#clock-cells = <0>;
compatible = "fixed-clock";

23
sys/gnu/dts/arm/dm814x.dtsi
View File

@ -305,6 +305,13 @@
reg = <0x60000 0x1000>;
};
rtc: rtc@c0000 {
compatible = "ti,am3352-rtc", "ti,da830-rtc";
reg = <0xc0000 0x1000>;
interrupts = <75 76>;
ti,hwmods = "rtc";
};
mmc2: mmc@1d8000 {
compatible = "ti,omap4-hsmmc";
ti,hwmods = "mmc2";
@ -548,6 +555,22 @@
reg-names = "gmii-sel";
};
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
};
};

8
sys/gnu/dts/arm/dm8168-evm.dts
View File

@ -6,6 +6,7 @@
/dts-v1/;
#include "dm816x.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "DM8168 EVM";
@ -85,8 +86,12 @@
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
linux,mtd-name= "micron,mt29f2g16aadwp";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
@ -106,12 +111,9 @@
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wait-on-read = "true";
gpmc,wait-on-write = "true";
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
partition@0 {

42
sys/gnu/dts/arm/dm816x-clocks.dtsi
View File

@ -86,7 +86,7 @@
/* 0x48180000 */
&prcm_clocks {
clkout_pre_ck: clkout_pre_ck {
clkout_pre_ck: clkout_pre_ck@100 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
@ -94,7 +94,7 @@
reg = <0x100>;
};
clkout_div_ck: clkout_div_ck {
clkout_div_ck: clkout_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout_pre_ck>;
@ -103,7 +103,7 @@
reg = <0x100>;
};
clkout_ck: clkout_ck {
clkout_ck: clkout_ck@100 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout_div_ck>;
@ -112,7 +112,7 @@
};
/* CM_DPLL clocks p1795 */
sysclk1_ck: sysclk1_ck {
sysclk1_ck: sysclk1_ck@300 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 1>;
@ -120,7 +120,7 @@
reg = <0x0300>;
};
sysclk2_ck: sysclk2_ck {
sysclk2_ck: sysclk2_ck@304 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 2>;
@ -128,7 +128,7 @@
reg = <0x0304>;
};
sysclk3_ck: sysclk3_ck {
sysclk3_ck: sysclk3_ck@308 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 3>;
@ -136,7 +136,7 @@
reg = <0x0308>;
};
sysclk4_ck: sysclk4_ck {
sysclk4_ck: sysclk4_ck@30c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
@ -144,7 +144,7 @@
reg = <0x030c>;
};
sysclk5_ck: sysclk5_ck {
sysclk5_ck: sysclk5_ck@310 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclk4_ck>;
@ -152,7 +152,7 @@
reg = <0x0310>;
};
sysclk6_ck: sysclk6_ck {
sysclk6_ck: sysclk6_ck@314 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
@ -160,7 +160,7 @@
reg = <0x0314>;
};
sysclk10_ck: sysclk10_ck {
sysclk10_ck: sysclk10_ck@324 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&ddr_fapll 2>;
@ -168,7 +168,7 @@
reg = <0x0324>;
};
sysclk24_ck: sysclk24_ck {
sysclk24_ck: sysclk24_ck@3b4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 5>;
@ -176,7 +176,7 @@
reg = <0x03b4>;
};
mpu_ck: mpu_ck {
mpu_ck: mpu_ck@15dc {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sysclk2_ck>;
@ -184,7 +184,7 @@
reg = <0x15dc>;
};
audio_pll_a_ck: audio_pll_a_ck {
audio_pll_a_ck: audio_pll_a_ck@35c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&audio_fapll 1>;
@ -192,56 +192,56 @@
reg = <0x035c>;
};
sysclk18_ck: sysclk18_ck {
sysclk18_ck: sysclk18_ck@378 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
reg = <0x0378>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@390 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0390>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@394 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0394>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@398 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0398>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@39c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x039c>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@3a0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a0>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@3a4 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a4>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@3a8 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;

11
sys/gnu/dts/arm/dm816x.dtsi
View File

@ -183,6 +183,10 @@
dma-names = "rxtx";
gpmc,num-cs = <6>;
gpmc,num-waitpins = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
i2c1: i2c@48028000 {
@ -214,6 +218,13 @@
reg = <0x48200000 0x1000>;
};
rtc: rtc@480c0000 {
compatible = "ti,am3352-rtc", "ti,da830-rtc";
reg = <0x480c0000 0x1000>;
interrupts = <75 76>;
ti,hwmods = "rtc";
};
mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480c8000 0x2000>;

26
sys/gnu/dts/arm/dra62x-clocks.dtsi
View File

@ -6,6 +6,32 @@
#include "dm814x-clocks.dtsi"
/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
&adpll_hdvic_ck {
status = "disabled";
};
&adpll_l3_ck {
status = "disabled";
};
&adpll_dss_ck {
status = "disabled";
};
/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
&sysclk4_ck {
clocks = <&adpll_isp_ck 1>;
};
&sysclk5_ck {
clocks = <&adpll_isp_ck 1>;
};
&sysclk6_ck {
clocks = <&adpll_isp_ck 1>;
};
/*
* Compared to dm814x, dra62x has different shifts and more mux options.
* Please add the extra options for ysclk_14 and 16 if really needed.

58
sys/gnu/dts/arm/dra62x-j5eco-evm.dts
View File

@ -6,6 +6,7 @@
/dts-v1/;
#include "dra62x.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "DRA62x J5 Eco EVM";
@ -35,6 +36,63 @@
phy-mode = "rgmii";
};
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name= "micron,mt29f2g16aadwp";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "bch8";
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
partition@0 {
label = "X-Loader";
reg = <0 0x80000>;
};
partition@0x80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
partition@0x1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
partition@0x280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
partition@0x780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
};
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pins>;

79
sys/gnu/dts/arm/dra7-evm.dts
View File

@ -18,7 +18,7 @@
memory {
device_type = "memory";
reg = <0x80000000 0x60000000>; /* 1536 MB */
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
evm_3v3_sd: fixedregulator-sd {
@ -33,6 +33,7 @@
evm_3v3_sw: fixedregulator-evm_3v3_sw {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sw";
vin-supply = <&sysen1>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@ -64,10 +65,11 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
vin-supply = <&sysen2>;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
simple-audio-card,widgets =
@ -224,21 +226,6 @@
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
@ -254,8 +241,9 @@
nand_flash_x16: nand_flash_x16 {
/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
* So NAND flash requires following switch settings:
* SW5.9 (GPMC_WPN) = LOW
* SW5.1 (NAND_BOOTn) = HIGH */
* SW5.1 (NAND_BOOTn) = ON (LOW)
* SW5.9 (GPMC_WPN) = OFF (HIGH)
*/
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
@ -428,7 +416,7 @@
/* VDD_DSPEVE */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
@ -446,7 +434,7 @@
/* CORE_VDD */
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1060000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
@ -523,12 +511,37 @@
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
/* REGEN1 is unused */
regen2: regen2 {
/* Needed for PMIC internal resources */
regulator-name = "regen2";
regulator-boot-on;
regulator-always-on;
};
/* REGEN3 is unused */
sysen1: sysen1 {
/* PMIC_REGEN_3V3 */
regulator-name = "sysen1";
regulator-boot-on;
regulator-always-on;
};
sysen2: sysen2 {
/* PMIC_REGEN_DDR */
regulator-name = "sysen2";
regulator-boot-on;
regulator-always-on;
};
};
};
};
pcf_lcd: gpio@20 {
compatible = "nxp,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
@ -539,7 +552,7 @@
};
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
@ -573,7 +586,7 @@
clock-frequency = <400000>;
pcf_hdmi: gpio@26 {
compatible = "nxp,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
@ -650,18 +663,14 @@
&qspi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <48000000>;
spi-max-frequency = <64000000>;
m25p80@0 {
compatible = "s25fl256s1";
spi-max-frequency = <48000000>;
spi-max-frequency = <64000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
@ -741,9 +750,14 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x16>;
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
@ -766,7 +780,6 @@
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
@ -901,6 +914,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {

314
sys/gnu/dts/arm/dra7.dtsi
View File

@ -15,8 +15,8 @@
#define MAX_SOURCES 400
/ {
#address-cells = <1>;
#size-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
compatible = "ti,dra7xx";
interrupt-parent = <&crossbar_mpu>;
@ -57,10 +57,10 @@
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
reg = <0x0 0x48211000 0x0 0x1000>,
<0x0 0x48212000 0x0 0x1000>,
<0x0 0x48214000 0x0 0x2000>,
<0x0 0x48216000 0x0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
@ -69,7 +69,7 @@
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
reg = <0x0 0x48281000 0x0 0x1000>;
interrupt-parent = <&gic>;
};
@ -96,10 +96,10 @@
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ranges = <0x0 0x0 0x0 0xc0000000>;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
reg = <0x0 0x44000000 0x0 0x1000000>,
<0x0 0x45000000 0x0 0x1000>;
interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
@ -123,7 +123,7 @@
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
pbias_regulator: pbias_regulator@e00 {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
@ -156,6 +156,29 @@
compatible = "syscon";
reg = <0x1c04 0x0020>;
};
scm_conf_pcie: scm_conf@1c24 {
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
sdma_xbar: dma-router@b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xb78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
edma_xbar: dma-router@c78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xc78 0x7c>;
#dma-cells = <2>;
dma-requests = <204>;
ti,dma-safe-map = <0>;
dma-masters = <&edma>;
};
};
cm_core_aon: cm_core_aon@5000 {
@ -310,13 +333,43 @@
dma-requests = <127>;
};
sdma_xbar: dma-router@4a002b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0x4a002b78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
edma: edma@43300000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
reg = <0x43300000 0x100000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_ccint", "emda3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
/*
* memcpy is disabled, can be enabled with:
* ti,edma-memcpy-channels = <20 21>;
* for example. Note that these channels need to be
* masked in the xbar as well.
*/
};
edma_tptc0: tptc@43400000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc0";
reg = <0x43400000 0x100000>;
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
edma_tptc1: tptc@43500000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc1";
reg = <0x43500000 0x100000>;
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
gpio1: gpio@4ae10000 {
@ -768,12 +821,20 @@
ti,hwmods = "timer11";
};
timer12: timer@4ae20000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae20000 0x80>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer12";
ti,timer-alwon;
ti,timer-secure;
};
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
status = "disabled";
};
timer14: timer@4882a000 {
@ -781,7 +842,6 @@
reg = <0x4882a000 0x80>;
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
status = "disabled";
};
timer15: timer@4882c000 {
@ -789,7 +849,6 @@
reg = <0x4882c000 0x80>;
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
status = "disabled";
};
timer16: timer@4882e000 {
@ -797,7 +856,6 @@
reg = <0x4882e000 0x80>;
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
status = "disabled";
};
wdt2: wdt@4ae14000 {
@ -1168,14 +1226,6 @@
status = "disabled";
};
omap_control_sata: control-phy@4a002374 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002374 0x4>;
reg-names = "power";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
};
/* OCP2SCP3 */
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp";
@ -1190,7 +1240,7 @@
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
syscon-phy-power = <&scm_conf 0x374>;
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
@ -1202,16 +1252,18 @@
reg = <0x4a094000 0x80>, /* phy_rx */
<0x4a094400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
ctrl-module = <&omap_control_pcie1phy>;
syscon-phy-power = <&scm_conf_pcie 0x1c>;
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy1_32khz>,
<&optfclk_pciephy1_clk>,
<&optfclk_pciephy1_div_clk>,
<&optfclk_pciephy_div>;
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div";
"div-clk", "phy-div", "sysclk";
#phy-cells = <0>;
};
@ -1220,16 +1272,18 @@
reg = <0x4a095000 0x80>, /* phy_rx */
<0x4a095400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
ctrl-module = <&omap_control_pcie2phy>;
syscon-phy-power = <&scm_conf_pcie 0x20>;
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy2_32khz>,
<&optfclk_pciephy2_clk>,
<&optfclk_pciephy2_div_clk>,
<&optfclk_pciephy_div>;
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div";
"div-clk", "phy-div", "sysclk";
#phy-cells = <0>;
status = "disabled";
};
@ -1245,23 +1299,6 @@
ti,hwmods = "sata";
};
omap_control_pcie1phy: control-phy@0x4a003c40 {
compatible = "ti,control-phy-pcie";
reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
reg-names = "power", "control_sma", "pcie_pcs";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
};
omap_control_pcie2phy: control-pcie@0x4a003c44 {
compatible = "ti,control-phy-pcie";
reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
reg-names = "power", "control_sma", "pcie_pcs";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
status = "disabled";
};
rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
@ -1271,24 +1308,6 @@
clocks = <&sys_32k_ck>;
};
omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
reg-names = "power";
};
omap_control_usb3phy1: control-phy@4a002370 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002370 0x4>;
reg-names = "power";
};
omap_control_usb2phy2: control-phy@0x4a002e74 {
compatible = "ti,control-phy-usb2-dra7";
reg = <0x4a002e74 0x4>;
reg-names = "power";
};
/* OCP2SCP1 */
ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
@ -1301,7 +1320,7 @@
usb2_phy1: phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x400>;
ctrl-module = <&omap_control_usb2phy1>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
@ -1310,9 +1329,10 @@
};
usb2_phy2: phy@4a085000 {
compatible = "ti,omap-usb2";
compatible = "ti,dra7x-usb2-phy2",
"ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
syscon-phy-power = <&scm_conf 0xe74>;
clocks = <&usb_phy2_always_on_clk32k>,
<&usb_otg_ss2_refclk960m>;
clock-names = "wkupclk",
@ -1326,7 +1346,7 @@
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy1>;
syscon-phy-power = <&scm_conf 0x370>;
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
<&usb_otg_ss1_refclk960m>;
@ -1357,7 +1377,6 @@
"otg";
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
maximum-speed = "super-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
@ -1385,7 +1404,6 @@
"otg";
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
@ -1413,7 +1431,6 @@
interrupt-names = "peripheral",
"host",
"otg";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
@ -1434,10 +1451,16 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
@ -1452,21 +1475,136 @@
status = "disabled";
};
mcasp1: mcasp@48460000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x48460000 0x2000>,
<0x45800000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
<&mcasp1_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp2: mcasp@48464000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp2";
reg = <0x48464000 0x2000>,
<0x45c00000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
<&mcasp2_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp3: mcasp@48468000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
reg = <0x48468000 0x2000>;
reg-names = "mpu";
reg = <0x48468000 0x2000>,
<0x46000000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp4: mcasp@4846c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp4";
reg = <0x4846c000 0x2000>,
<0x48436000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp5: mcasp@48470000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp5";
reg = <0x48470000 0x2000>,
<0x4843a000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp6: mcasp@48474000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp6";
reg = <0x48474000 0x2000>,
<0x4844c000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp7: mcasp@48478000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp7";
reg = <0x48478000 0x2000>,
<0x48450000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp8: mcasp@4847c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp8";
reg = <0x4847c000 0x2000>,
<0x48454000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
@ -1500,6 +1638,16 @@
0x48485200 0x2E00>;
#address-cells = <1>;
#size-cells = <1>;
/*
* Do not allow gating of cpsw clock as workaround
* for errata i877. Keeping internal clock disabled
* causes the device switching characteristics
* to degrade over time and eventually fail to meet
* the data manual delay time/skew specs.
*/
ti,no-idle;
/*
* rx_thresh_pend
* rx_pend
@ -1603,6 +1751,8 @@
#include "omap4-cpu-thermal.dtsi"
#include "omap5-gpu-thermal.dtsi"
#include "omap5-core-thermal.dtsi"
#include "dra7-dspeve-thermal.dtsi"
#include "dra7-iva-thermal.dtsi"
};
};

834
sys/gnu/dts/arm/dra72-evm.dts
View File

@ -1,691 +1,40 @@
/*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/ti-dra7-atl.h>
#include "dra72-evm-common.dtsi"
/ {
model = "TI DRA722";
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1024 MB */
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
};
aliases {
display0 = &hdmi0;
};
evm_3v3: fixedregulator-evm_3v3 {
compatible = "regulator-fixed";
regulator-name = "evm_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
/* TPS77018DBVT */
compatible = "regulator-fixed";
regulator-name = "aic_dvdd";
vin-supply = <&evm_3v3>;
&tps65917_regulators {
ldo2_reg: ldo2 {
/* LDO2_OUT --> TP1017 (UNUSED) */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
pinctrl-0 = <&tpd12s015_pins>;
gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line Out",
"Microphone", "Mic Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC3L", "Mic Jack",
"MIC3R", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
sound0_master: simple-audio-card,cpu {
sound-dai = <&mcasp3>;
system-clock-frequency = <5644800>;
};
simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
clocks = <&atl_clkin2_ck>;
};
regulator-allow-bypass;
};
};
&dra7_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
nand_default: nand_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
tps65917_pins_default: tps65917_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
>;
};
&hdmi {
vdda-supply = <&ldo3_reg>;
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps65917: tps65917@58 {
compatible = "ti,tps65917";
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-controller;
#interrupt-cells = <2>;
ti,system-power-controller;
tps65917_pmic {
compatible = "ti,tps65917-pmic";
regulators {
smps1_reg: smps1 {
/* VDD_MPU */
regulator-name = "smps1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps2_reg: smps2 {
/* VDD_CORE */
regulator-name = "smps2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1060000>;
regulator-boot-on;
regulator-always-on;
};
smps3_reg: smps3 {
/* VDD_GPU IVA DSPEVE */
regulator-name = "smps3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-boot-on;
regulator-always-on;
};
smps4_reg: smps4 {
/* VDDS1V8 */
regulator-name = "smps4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
smps5_reg: smps5 {
/* VDD_DDR */
regulator-name = "smps5";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: ldo1 {
/* LDO1_OUT --> SDIO */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-bypass;
};
ldo2_reg: ldo2 {
/* LDO2_OUT --> TP1017 (UNUSED) */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-allow-bypass;
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHY */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo5_reg: ldo5 {
/* VDDA_1V8_PLL */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldo4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
};
tps65917_power_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps65917>;
interrupts = <1 IRQ_TYPE_NONE>;
wakeup-source;
ti,palmas-long-press-seconds = <6>;
};
};
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
tlv320aic3106: tlv320aic3106@19 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x19>;
adc-settle-ms = <40>;
ai3x-micbias-vg = <1>; /* 2.0V */
status = "okay";
/* Regulators */
AVDD-supply = <&evm_3v3>;
IOVDD-supply = <&evm_3v3>;
DRVDD-supply = <&evm_3v3>;
DVDD-supply = <&aic_dvdd>;
};
};
&i2c5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
pcf_hdmi: pcf8575@26 {
compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
/*
* initial state is used here to keep the mdio interface
* selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
* VIN2_S0 driven high otherwise Ethernet stops working
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
*/
lines-initial-states = <0x0f2b>;
p1 {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "vin6_sel_s0";
};
};
};
&uart1 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
&elm {
status = "okay";
};
&gpmc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_default>;
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
/* To use NAND, DIP switch SW5 must be set like so:
* SW5.1 (NAND_SELn) = ON (LOW)
* SW5.9 (GPMC_WPN) = OFF (HIGH)
*/
reg = <0 0 4>; /* device IO registers */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <80>;
gpmc,cs-wr-off-ns = <80>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <60>;
gpmc,adv-wr-off-ns = <60>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <50>;
gpmc,oe-on-ns = <4>;
gpmc,oe-off-ns = <40>;
gpmc,access-ns = <40>;
gpmc,wr-access-ns = <80>;
gpmc,rd-cycle-ns = <80>;
gpmc,wr-cycle-ns = <80>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x000020000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00020000 0x00020000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00040000 0x00020000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x00060000 0x00020000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00080000 0x00040000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x000c0000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x001c0000 0x00020000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x001e0000 0x00020000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00200000 0x00800000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00a00000 0x0f600000>;
};
};
};
&usb2_phy1 {
phy-supply = <&ldo4_reg>;
};
&usb2_phy2 {
phy-supply = <&ldo4_reg>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
};
&usb2 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb2_pins>;
};
&mmc1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
max-frequency = <192000000>;
};
&mmc2 {
/* SW5-3 in ON position */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
};
&dra7_pmx_core {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
&pcf_gpio_21 {
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
};
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
slaves = <1>;
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
};
@ -694,158 +43,3 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
&qspi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <48000000>;
m25p80@0 {
compatible = "s25fl256s1";
spi-max-frequency = <48000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table.
* The ROM checks the first four physical blocks
* for a valid file to boot and the flash here is
* 64KiB block size.
*/
partition@0 {
label = "QSPI.SPL";
reg = <0x00000000 0x000010000>;
};
partition@1 {
label = "QSPI.SPL.backup1";
reg = <0x00010000 0x00010000>;
};
partition@2 {
label = "QSPI.SPL.backup2";
reg = <0x00020000 0x00010000>;
};
partition@3 {
label = "QSPI.SPL.backup3";
reg = <0x00030000 0x00010000>;
};
partition@4 {
label = "QSPI.u-boot";
reg = <0x00040000 0x00100000>;
};
partition@5 {
label = "QSPI.u-boot-spl-os";
reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
reg = <0x009e0000 0x01620000>;
};
};
};
&dss {
status = "ok";
vdda_video-supply = <&ldo5_reg>;
};
&hdmi {
status = "ok";
vdda-supply = <&ldo3_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&atl {
pinctrl-names = "default";
pinctrl-0 = <&atl_pins>;
assigned-clocks = <&abe_dpll_sys_clk_mux>,
<&atl_gfclk_mux>,
<&dpll_abe_ck>,
<&dpll_abe_m2x2_ck>,
<&atl_clkin2_ck>;
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
status = "okay";
atl2 {
bws = <DRA7_ATL_WS_MCASP2_FSX>;
aws = <DRA7_ATL_WS_MCASP3_FSX>;
};
};
&mcasp3 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins>;
pinctrl-1 = <&mcasp3_sleep_pins>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&atl_clkin2_ck>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
};

5
sys/gnu/dts/arm/dra74x.dtsi
View File

@ -76,7 +76,6 @@
interrupt-names = "peripheral",
"host",
"otg";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
};
@ -108,8 +107,8 @@
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
<0x58004300 0x20>,
<0x58005054 0x4>,
<0x58005300 0x20>;
<0x58009054 0x4>,
<0x58009300 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";

412
sys/gnu/dts/arm/dra7xx-clocks.dtsi
View File

File diff suppressed because it is too large Load Diff

274
sys/gnu/dts/arm/ea3250.dts
View File

@ -1,274 +0,0 @@
/*
* Embedded Artists LPC3250 board
*
* Copyright 2012 Roland Stigge <stigge@antcom.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "lpc32xx.dtsi"
/ {
model = "Embedded Artists LPC3250 board based on NXP LPC3250";
compatible = "ea,ea3250", "nxp,lpc3250";
#address-cells = <1>;
#size-cells = <1>;
memory {
device_type = "memory";
reg = <0x80000000 0x4000000>;
};
ahb {
mac: ethernet@31060000 {
phy-mode = "rmii";
use-iram;
};
/* 128MB Flash via SLC NAND controller */
slc: flash@20020000 {
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
nxp,wdr-clks = <14>;
nxp,wwidth = <260000000>;
nxp,whold = <104000000>;
nxp,wsetup = <200000000>;
nxp,rdr-clks = <14>;
nxp,rwidth = <34666666>;
nxp,rhold = <104000000>;
nxp,rsetup = <200000000>;
nand-on-flash-bbt;
gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
mtd0@00000000 {
label = "ea3250-boot";
reg = <0x00000000 0x00080000>;
read-only;
};
mtd1@00080000 {
label = "ea3250-uboot";
reg = <0x00080000 0x000c0000>;
read-only;
};
mtd2@00140000 {
label = "ea3250-kernel";
reg = <0x00140000 0x00400000>;
};
mtd3@00540000 {
label = "ea3250-rootfs";
reg = <0x00540000 0x07ac0000>;
};
};
apb {
uart5: serial@40090000 {
status = "okay";
};
uart3: serial@40080000 {
status = "okay";
};
uart6: serial@40098000 {
status = "okay";
};
i2c1: i2c@400A0000 {
clock-frequency = <100000>;
eeprom@50 {
compatible = "at,24c256";
reg = <0x50>;
};
eeprom@57 {
compatible = "at,24c64";
reg = <0x57>;
};
uda1380: uda1380@18 {
compatible = "nxp,uda1380";
reg = <0x18>;
power-gpio = <&gpio 0x59 0>;
reset-gpio = <&gpio 0x51 0>;
dac-clk = "wspll";
};
pca9532: pca9532@60 {
compatible = "nxp,pca9532";
gpio-controller;
#gpio-cells = <2>;
reg = <0x60>;
};
};
i2c2: i2c@400A8000 {
clock-frequency = <100000>;
};
sd@20098000 {
wp-gpios = <&pca9532 5 0>;
cd-gpios = <&pca9532 4 0>;
cd-inverted;
bus-width = <4>;
status = "okay";
};
};
fab {
uart1: serial@40014000 {
status = "okay";
};
/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
adc@40048000 {
status = "okay";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
button@21 {
label = "Interrupt Key";
linux,code = <103>;
gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
};
key1 {
label = "KEY1";
linux,code = <1>;
gpios = <&pca9532 0 0>;
};
key2 {
label = "KEY2";
linux,code = <2>;
gpios = <&pca9532 1 0>;
};
key3 {
label = "KEY3";
linux,code = <3>;
gpios = <&pca9532 2 0>;
};
key4 {
label = "KEY4";
linux,code = <4>;
gpios = <&pca9532 3 0>;
};
joy0 {
label = "Joystick Key 0";
linux,code = <10>;
gpios = <&gpio 2 0 0>; /* P2.0 */
};
joy1 {
label = "Joystick Key 1";
linux,code = <11>;
gpios = <&gpio 2 1 0>; /* P2.1 */
};
joy2 {
label = "Joystick Key 2";
linux,code = <12>;
gpios = <&gpio 2 2 0>; /* P2.2 */
};
joy3 {
label = "Joystick Key 3";
linux,code = <13>;
gpios = <&gpio 2 3 0>; /* P2.3 */
};
joy4 {
label = "Joystick Key 4";
linux,code = <14>;
gpios = <&gpio 2 4 0>; /* P2.4 */
};
};
leds {
compatible = "gpio-leds";
/* LEDs on OEM Board */
led1 {
gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
linux,default-trigger = "timer";
default-state = "off";
};
led2 {
gpios = <&gpio 2 10 1>; /* P2.10, active low */
default-state = "off";
};
led3 {
gpios = <&gpio 2 11 1>; /* P2.11, active low */
default-state = "off";
};
led4 {
gpios = <&gpio 2 12 1>; /* P2.12, active low */
default-state = "off";
};
/* LEDs on Base Board */
lede1 {
gpios = <&pca9532 8 0>;
default-state = "off";
};
lede2 {
gpios = <&pca9532 9 0>;
default-state = "off";
};
lede3 {
gpios = <&pca9532 10 0>;
default-state = "off";
};
lede4 {
gpios = <&pca9532 11 0>;
default-state = "off";
};
lede5 {
gpios = <&pca9532 12 0>;
default-state = "off";
};
lede6 {
gpios = <&pca9532 13 0>;
default-state = "off";
};
lede7 {
gpios = <&pca9532 14 0>;
default-state = "off";
};
lede8 {
gpios = <&pca9532 15 0>;
default-state = "off";
};
};
};
/* Here, choose exactly one from: ohci, usbd */
&ohci /* &usbd */ {
transceiver = <&isp1301>;
status = "okay";
};
&i2cusb {
clock-frequency = <100000>;
isp1301: usb-transceiver@2d {
compatible = "nxp,isp1301";
reg = <0x2d>;
};
};

4
sys/gnu/dts/arm/emev2-kzm9d.dts
View File

@ -105,8 +105,8 @@
&pfc {
uart1_pins: serial@e1030000 {
renesas,groups = "uart1_ctrl", "uart1_data";
renesas,function = "uart1";
groups = "uart1_ctrl", "uart1_data";
function = "uart1";
};
};

39
sys/gnu/dts/arm/emev2.dtsi
View File

@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@ -53,8 +54,8 @@
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
<0 121 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks@e0110000 {
@ -158,7 +159,7 @@
timer@e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sti_sclk>;
clock-names = "sclk";
};
@ -166,7 +167,7 @@
uart0: serial@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usia_u0_sclk>;
clock-names = "sclk";
};
@ -174,7 +175,7 @@
uart1: serial@e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u1_sclk>;
clock-names = "sclk";
};
@ -182,7 +183,7 @@
uart2: serial@e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u2_sclk>;
clock-names = "sclk";
};
@ -190,7 +191,7 @@
uart3: serial@e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u3_sclk>;
clock-names = "sclk";
};
@ -203,8 +204,8 @@
gpio0: gpio@e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
<0 68 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#gpio-cells = <2>;
@ -215,8 +216,8 @@
gpio1: gpio@e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
<0 70 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#gpio-cells = <2>;
@ -227,8 +228,8 @@
gpio2: gpio@e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
<0 72 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#gpio-cells = <2>;
@ -239,8 +240,8 @@
gpio3: gpio@e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
<0 74 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#gpio-cells = <2>;
@ -251,8 +252,8 @@
gpio4: gpio@e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
<0 76 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 128 31>;
#gpio-cells = <2>;
@ -266,7 +267,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
status = "disabled";
@ -277,7 +278,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe10a0000 0x28>;
interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic1_sclk>;
clock-names = "sclk";
status = "disabled";

65
sys/gnu/dts/arm/exynos3250-monk.dts
View File

@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos3250.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
@ -43,7 +44,7 @@
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
gpio-key,wakeup;
wakeup-source;
};
};
@ -67,7 +68,7 @@
interrupt-parent = <&gpx1>;
interrupts = <5 0>;
reg = <0x25>;
wakeup;
wakeup-source;
muic: max77836-muic {
compatible = "maxim,max77836-muic";
@ -156,6 +157,12 @@
};
};
&bus_dmc {
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
vdd-supply = <&buck1_reg>;
status = "okay";
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@ -185,7 +192,7 @@
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
reg = <0x66>;
wakeup;
wakeup-source;
s2mps14_osc: clocks {
compatible = "samsung,s2mps14-clk";
@ -458,46 +465,6 @@
status = "okay";
};
&ppmu_dmc0 {
status = "okay";
events {
ppmu_dmc0_3: ppmu-event3-dmc0 {
event-name = "ppmu-event3-dmc0";
};
};
};
&ppmu_dmc1 {
status = "okay";
events {
ppmu_dmc1_3: ppmu-event3-dmc1 {
event-name = "ppmu-event3-dmc1";
};
};
};
&ppmu_leftbus {
status = "okay";
events {
ppmu_leftbus_3: ppmu-event3-leftbus {
event-name = "ppmu-event3-leftbus";
};
};
};
&ppmu_rightbus {
status = "okay";
events {
ppmu_rightbus_3: ppmu-event3-rightbus {
event-name = "ppmu-event3-rightbus";
};
};
};
&xusbxti {
clock-frequency = <24000000>;
};
@ -558,7 +525,17 @@
&pinctrl_1 {
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
pinctrl-0 = <&initial1 &sleep1>;
initial1: initial-state {
PIN_IN(gpk2-0, DOWN, LV1);
PIN_IN(gpk2-1, DOWN, LV1);
PIN_IN(gpk2-2, DOWN, LV1);
PIN_IN(gpk2-3, DOWN, LV1);
PIN_IN(gpk2-4, DOWN, LV1);
PIN_IN(gpk2-5, DOWN, LV1);
PIN_IN(gpk2-6, DOWN, LV1);
};
sleep1: sleep-state {
PIN_SLP(gpe0-0, PREV, NONE);

80
sys/gnu/dts/arm/exynos3250-pinctrl.dtsi
View File

@ -16,11 +16,49 @@
#define PIN_PULL_DOWN 1
#define PIN_PULL_UP 3
#define PIN_DRV_LV1 0
#define PIN_DRV_LV2 2
#define PIN_DRV_LV3 1
#define PIN_DRV_LV4 3
#define PIN_PDN_OUT0 0
#define PIN_PDN_OUT1 1
#define PIN_PDN_INPUT 2
#define PIN_PDN_PREV 3
#define PIN_IN(_pin, _pull, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <0>; \
samsung,pin-pud = <PIN_PULL_ ##_pull>; \
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
}
#define PIN_OUT(_pin, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <1>; \
samsung,pin-pud = <0>; \
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
}
#define PIN_OUT_SET(_pin, _val, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <1>; \
samsung,pin-pud = <0>; \
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
samsung,pin-val = <_val>; \
}
#define PIN_CFG(_pin, _sel, _pull, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <_sel>; \
samsung,pin-pud = <PIN_PULL_ ##_pull>; \
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
}
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
samsung,pins = #_pin; \
@ -120,6 +158,13 @@
samsung,pin-drv = <0>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
@ -445,6 +490,41 @@
samsung,pin-drv = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpk2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpk2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpk2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpk2-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",

165
sys/gnu/dts/arm/exynos3250-rinato.dts
View File

@ -14,6 +14,7 @@
/dts-v1/;
#include "exynos3250.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
@ -43,7 +44,7 @@
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
gpio-key,wakeup;
wakeup-source;
};
};
@ -58,7 +59,7 @@
interrupt-parent = <&gpx1>;
interrupts = <5 0>;
reg = <0x25>;
wakeup;
wakeup-source;
muic: max77836-muic {
compatible = "maxim,max77836-muic";
@ -147,6 +148,53 @@
};
};
&bus_dmc {
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
vdd-supply = <&buck1_reg>;
status = "okay";
};
&bus_leftbus {
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
vdd-supply = <&buck3_reg>;
status = "okay";
};
&bus_rightbus {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_lcd0 {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_fsys {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_mcuisp {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_isp {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_peril {
devfreq = <&bus_leftbus>;
status = "okay";
};
&bus_mfc {
devfreq = <&bus_leftbus>;
status = "okay";
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@ -246,7 +294,7 @@
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
reg = <0x66>;
wakeup;
wakeup-source;
s2mps14_osc: clocks {
compatible = "samsung,s2mps14-clk";
@ -635,53 +683,27 @@
status = "okay";
};
&ppmu_dmc0 {
status = "okay";
events {
ppmu_dmc0_3: ppmu-event3-dmc0 {
event-name = "ppmu-event3-dmc0";
};
};
};
&ppmu_dmc1 {
status = "okay";
events {
ppmu_dmc1_3: ppmu-event3-dmc1 {
event-name = "ppmu-event3-dmc1";
};
};
};
&ppmu_leftbus {
status = "okay";
events {
ppmu_leftbus_3: ppmu-event3-leftbus {
event-name = "ppmu-event3-leftbus";
};
};
};
&ppmu_rightbus {
status = "okay";
events {
ppmu_rightbus_3: ppmu-event3-rightbus {
event-name = "ppmu-event3-rightbus";
};
};
};
&xusbxti {
clock-frequency = <24000000>;
};
&pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
pinctrl-0 = <&initial0 &sleep0>;
initial0: initial-state {
PIN_IN(gpa1-4, DOWN, LV1);
PIN_IN(gpa1-5, DOWN, LV1);
PIN_IN(gpc0-0, DOWN, LV1);
PIN_IN(gpc0-1, DOWN, LV1);
PIN_IN(gpc0-2, DOWN, LV1);
PIN_IN(gpc0-3, DOWN, LV1);
PIN_IN(gpc0-4, DOWN, LV1);
PIN_IN(gpd0-0, DOWN, LV1);
PIN_IN(gpd0-1, DOWN, LV1);
};
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, DOWN);
@ -735,7 +757,60 @@
&pinctrl_1 {
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
pinctrl-0 = <&initial1 &sleep1>;
initial1: initial-state {
PIN_IN(gpe0-6, DOWN, LV1);
PIN_IN(gpe0-7, DOWN, LV1);
PIN_IN(gpe1-0, DOWN, LV1);
PIN_IN(gpe1-3, DOWN, LV1);
PIN_IN(gpe1-4, DOWN, LV1);
PIN_IN(gpe1-5, DOWN, LV1);
PIN_IN(gpe1-6, DOWN, LV1);
PIN_IN(gpk2-0, DOWN, LV1);
PIN_IN(gpk2-1, DOWN, LV1);
PIN_IN(gpk2-2, DOWN, LV1);
PIN_IN(gpk2-3, DOWN, LV1);
PIN_IN(gpk2-4, DOWN, LV1);
PIN_IN(gpk2-5, DOWN, LV1);
PIN_IN(gpk2-6, DOWN, LV1);
PIN_IN(gpm0-0, DOWN, LV1);
PIN_IN(gpm0-1, DOWN, LV1);
PIN_IN(gpm0-2, DOWN, LV1);
PIN_IN(gpm0-3, DOWN, LV1);
PIN_IN(gpm0-4, DOWN, LV1);
PIN_IN(gpm0-5, DOWN, LV1);
PIN_IN(gpm0-6, DOWN, LV1);
PIN_IN(gpm0-7, DOWN, LV1);
PIN_IN(gpm1-0, DOWN, LV1);
PIN_IN(gpm1-1, DOWN, LV1);
PIN_IN(gpm1-2, DOWN, LV1);
PIN_IN(gpm1-3, DOWN, LV1);
PIN_IN(gpm1-4, DOWN, LV1);
PIN_IN(gpm1-5, DOWN, LV1);
PIN_IN(gpm1-6, DOWN, LV1);
PIN_IN(gpm2-0, DOWN, LV1);
PIN_IN(gpm2-1, DOWN, LV1);
PIN_IN(gpm3-0, DOWN, LV1);
PIN_IN(gpm3-1, DOWN, LV1);
PIN_IN(gpm3-2, DOWN, LV1);
PIN_IN(gpm3-3, DOWN, LV1);
PIN_IN(gpm3-4, DOWN, LV1);
PIN_IN(gpm4-1, DOWN, LV1);
PIN_IN(gpm4-2, DOWN, LV1);
PIN_IN(gpm4-3, DOWN, LV1);
PIN_IN(gpm4-4, DOWN, LV1);
PIN_IN(gpm4-5, DOWN, LV1);
PIN_IN(gpm4-6, DOWN, LV1);
PIN_IN(gpm4-7, DOWN, LV1);
};
sleep1: sleep-state {
PIN_SLP(gpe0-0, PREV, NONE);

225
sys/gnu/dts/arm/exynos3250.dtsi
View File

@ -19,6 +19,7 @@
#include "skeleton.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
/ {
@ -30,6 +31,7 @@
pinctrl1 = &pinctrl_1;
mshc0 = &mshc_0;
mshc1 = &mshc_1;
mshc2 = &mshc_2;
spi0 = &spi_0;
spi1 = &spi_1;
i2c0 = &i2c_0;
@ -42,6 +44,7 @@
i2c7 = &i2c_7;
serial0 = &serial_0;
serial1 = &serial_1;
serial2 = &serial_2;
};
cpus {
@ -152,21 +155,7 @@
interrupt-parent = <&gic>;
};
poweroff: syscon-poweroff {
compatible = "syscon-poweroff";
regmap = <&pmu_system_controller>;
offset = <0x330C>; /* PS_HOLD_CONTROL */
mask = <0x5200>; /* Reset value */
};
reboot: syscon-reboot {
compatible = "syscon-reboot";
regmap = <&pmu_system_controller>;
offset = <0x0400>; /* SWRESET */
mask = <0x1>;
};
mipi_phy: video-phy@10020710 {
mipi_phy: video-phy {
compatible = "samsung,s5pv210-mipi-video-phy";
#phy-cells = <1>;
syscon = <&pmu_system_controller>;
@ -370,6 +359,18 @@
status = "disabled";
};
mshc_2: mshc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
interrupts = <0 144 0>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
exynos_usbphy: exynos-usbphy@125B0000 {
compatible = "samsung,exynos3250-usb2-phy";
reg = <0x125B0000 0x100>;
@ -381,7 +382,7 @@
};
amba {
compatible = "arm,amba-bus";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
@ -465,6 +466,17 @@
status = "disabled";
};
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 111 0>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
pinctrl-0 = <&uart2_data>;
status = "disabled";
};
i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
@ -701,6 +713,187 @@
clock-names = "ppmu";
status = "disabled";
};
bus_dmc: bus_dmc {
compatible = "samsung,exynos-bus";
clocks = <&cmu_dmc CLK_DIV_DMC>;
clock-names = "bus";
operating-points-v2 = <&bus_dmc_opp_table>;
status = "disabled";
};
bus_dmc_opp_table: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp@50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <800000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <800000>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <800000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <825000>;
};
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <875000>;
};
};
bus_leftbus: bus_leftbus {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_GDL>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_rightbus: bus_rightbus {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_GDR>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_lcd0: bus_lcd0 {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_ACLK_160>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_fsys: bus_fsys {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_ACLK_200>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_mcuisp: bus_mcuisp {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
clock-names = "bus";
operating-points-v2 = <&bus_mcuisp_opp_table>;
status = "disabled";
};
bus_isp: bus_isp {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_ACLK_266>;
clock-names = "bus";
operating-points-v2 = <&bus_isp_opp_table>;
status = "disabled";
};
bus_peril: bus_peril {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_DIV_ACLK_100>;
clock-names = "bus";
operating-points-v2 = <&bus_peril_opp_table>;
status = "disabled";
};
bus_mfc: bus_mfc {
compatible = "samsung,exynos-bus";
clocks = <&cmu CLK_SCLK_MFC>;
clock-names = "bus";
operating-points-v2 = <&bus_leftbus_opp_table>;
status = "disabled";
};
bus_leftbus_opp_table: opp_table2 {
compatible = "operating-points-v2";
opp-shared;
opp@50000000 {
opp-hz = /bits/ 64 <50000000>;
opp-microvolt = <900000>;
};
opp@80000000 {
opp-hz = /bits/ 64 <80000000>;
opp-microvolt = <900000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <1000000>;
};
opp@134000000 {
opp-hz = /bits/ 64 <134000000>;
opp-microvolt = <1000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <1000000>;
};
};
bus_mcuisp_opp_table: opp_table3 {
compatible = "operating-points-v2";
opp-shared;
opp@50000000 {
opp-hz = /bits/ 64 <50000000>;
};
opp@80000000 {
opp-hz = /bits/ 64 <80000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
};
};
bus_isp_opp_table: opp_table4 {
compatible = "operating-points-v2";
opp-shared;
opp@50000000 {
opp-hz = /bits/ 64 <50000000>;
};
opp@80000000 {
opp-hz = /bits/ 64 <80000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp@300000000 {
opp-hz = /bits/ 64 <300000000>;
};
};
bus_peril_opp_table: opp_table5 {
compatible = "operating-points-v2";
opp-shared;
opp@50000000 {
opp-hz = /bits/ 64 <50000000>;
};
opp@80000000 {
opp-hz = /bits/ 64 <80000000>;
};
opp@100000000 {
opp-hz = /bits/ 64 <100000000>;
};
};
};
};

Some files were not shown because too many files have changed in this diff Show More