d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

1) Fix link state detection for cards operating in TBI mode (fiber ones)

Browse Source 
2) add missing bus_dmamap_sync() call in bge_intr()

Tested by:	Husnu Demir <hdemir AT metu DOT edu DOT tr>
Approved by:	glebius (mentor)
MFC after:	3 days
This commit is contained in:
oleg 2006-02-01 14:26:35 +00:00
parent 2013a67745
commit fb47ff4774
2 changed files with 31 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
sys/dev/bge/if_bge.c
View File

@ -2787,6 +2787,9 @@ bge_intr(xsc)
statusword =
atomic_readandclear_32(&sc->bge_ldata.bge_status_block->bge_status);
bus_dmamap_sync(sc->bge_cdata.bge_status_tag,
sc->bge_cdata.bge_status_map, BUS_DMASYNC_PREREAD);
#ifdef notdef
/* Avoid this for now -- checking this register is expensive. */
/* Make sure this is really our interrupt. */
@ -2798,7 +2801,7 @@ bge_intr(xsc)
if ((sc->bge_asicrev == BGE_ASICREV_BCM5700 &&
sc->bge_chipid != BGE_CHIPID_BCM5700_B1) ||
statusword & BGE_STATFLAG_LINKSTATE_CHANGED)
statusword & BGE_STATFLAG_LINKSTATE_CHANGED || sc->bge_link_evt)
bge_link_upd(sc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
@ -2826,12 +2829,9 @@ bge_tick_locked(sc)
struct bge_softc *sc;
{
struct mii_data *mii = NULL;
struct ifnet *ifp;
BGE_LOCK_ASSERT(sc);
ifp = sc->bge_ifp;
if (sc->bge_asicrev == BGE_ASICREV_BCM5705 ||
sc->bge_asicrev == BGE_ASICREV_BCM5750)
bge_stats_update_regs(sc);
@ -2841,6 +2841,20 @@ bge_tick_locked(sc)
if (!sc->bge_tbi) {
mii = device_get_softc(sc->bge_miibus);
mii_tick(mii);
} else {
/*
* Since in TBI mode auto-polling can't be used we should poll
* link status manually. Here we register pending link event
* and trigger interrupt.
*/
#ifdef DEVICE_POLLING
/* In polling mode we poll link state in bge_poll_locked() */
if (!(sc->bge_ifp->if_capenable & IFCAP_POLLING))
#endif
{
sc->bge_link_evt++;
BGE_SETBIT(sc, BGE_MISC_LOCAL_CTL, BGE_MLC_INTR_SET);
}
}
callout_reset(&sc->bge_stat_ch, hz, bge_tick, sc);
@ -3725,6 +3739,9 @@ bge_link_upd(sc)
BGE_LOCK_ASSERT(sc);
/* Clear 'pending link event' flag */
sc->bge_link_evt = 0;
/*
* Process link state changes.
* Grrr. The link status word in the status block does
@ -3773,23 +3790,9 @@ bge_link_upd(sc)
}
if (sc->bge_tbi) {
/*
* Sometimes PCS encoding errors are detected in
* TBI mode (on fiber NICs), and for some reason
* the chip will signal them as link changes.
* If we get a link change event, but the 'PCS
* encoding error' bit in the MAC status register
* is set, don't bother doing a link check.
* This avoids spurious "link UP" messages
* that sometimes appear on fiber NICs during
* periods of heavy traffic. (There should be no
* effect on copper NICs.)
*/
status = CSR_READ_4(sc, BGE_MAC_STS);
if (!(status & (BGE_MACSTAT_PORT_DECODE_ERROR|
BGE_MACSTAT_MI_COMPLETE))) {
if (!sc->bge_link &&
(status & BGE_MACSTAT_TBI_PCS_SYNCHED)) {
if (status & BGE_MACSTAT_TBI_PCS_SYNCHED) {
if (!sc->bge_link) {
sc->bge_link++;
if (sc->bge_asicrev == BGE_ASICREV_BCM5704)
BGE_CLRBIT(sc, BGE_MAC_MODE,
@ -3797,11 +3800,13 @@ bge_link_upd(sc)
CSR_WRITE_4(sc, BGE_MAC_STS, 0xFFFFFFFF);
if (bootverbose)
if_printf(sc->bge_ifp, "link UP\n");
} else if (sc->bge_link) {
sc->bge_link = 0;
if (bootverbose)
if_printf(sc->bge_ifp, "link DOWN\n");
if_link_state_change(sc->bge_ifp, LINK_STATE_UP);
}
} else if (sc->bge_link) {
sc->bge_link = 0;
if (bootverbose)
if_printf(sc->bge_ifp, "link DOWN\n");
if_link_state_change(sc->bge_ifp, LINK_STATE_DOWN);
}
} else {
/*

3
sys/dev/bge/if_bgereg.h
View File

@ -2421,7 +2421,8 @@ struct bge_softc {
u_int32_t bge_tx_buf_ratio;
int bge_if_flags;
int bge_txcnt;
int bge_link;
int bge_link; /* link state */
int bge_link_evt; /* pending link event */
struct callout bge_stat_ch;
char *bge_vpd_prodname;
char *bge_vpd_readonly;